geom/idl/AdvancedGEOM.idl

480 lines
24 KiB
Plaintext
Raw Normal View History

2019-02-14 15:09:13 +05:00
// Copyright (C) 2007-2019 CEA/DEN, EDF R&D, OPEN CASCADE
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// File : AdvancedGEOM.idl
// Author : Roman NIKOLAEV
#ifndef __AdvancedGEOM_IDL__
#define __AdvancedGEOM_IDL__
#include "GEOM_Gen.idl"
module GEOM
{
/*!
* \brief Pattern for block division of the disk
*/
enum pattern {
/*! Square */
SQUARE,
/*! Hexagon */
HEXAGON
};
/*!
* \brief Interface for advanced modeling functions.
*/
interface IAdvancedOperations : GEOM::GEOM_IOperations
{
// T-Shape WITHOUT Thickness reduction
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShape (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeWithPosition (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2,
in GEOM::GEOM_Object theP3);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A chamfer is created
* on the junction of the pipes.
*
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeChamfer (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theH, in double theW, in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A chamfer is created on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeChamferWithPosition (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theH, in double theW, in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2,
in GEOM::GEOM_Object theP3);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A fillet is created on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theRF Radius of curvature of fillet.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeFillet (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRF, in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A fillet is created on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
* \param theRF Radius of curvature of fillet.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeFilletWithPosition (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRF, in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2,
in GEOM::GEOM_Object theP3);
// T-Shape WITH Thickness reduction
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTR (in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTRWithPosition(in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2, in GEOM::GEOM_Object theP3);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length). A chamfer is created
* on the junction of the pipes.
*
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTRChamfer(in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in double theH, in double theW, in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A chamfer is created on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theH Height of the chamfer.
* \param theW Width of the chamfer.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTRChamferWithPosition(in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in double theH, in double theW, in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2, in GEOM::GEOM_Object theP3);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A fillet is created on the junction of the pipes.
* Center of the shape is (0,0,0). The main plane of the T-shape is XOY.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theRF Radius of curvature of fillet.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTRFillet(in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in double theRF, in boolean theHexMesh);
/*!
* \brief Create a T-shape object with specified caracteristics for the main and
* the incident pipes (radius, width, half-length).
*
* A fillet is created on the junction of the pipes.
* The extremities of the main pipe are located on junctions points P1 and P2.
* The extremity of the incident pipe is located on junction point P3.
* \param theR1 Internal radius of main pipe
* \param theW1 Width of main pipe
* \param theL1 Half-length of main pipe
* \param theR2 Internal radius of incident pipe (R2 < R1)
* \param theW2 Width of incident pipe (R2+W2 < R1+W1)
* \param theL2 Half-length of incident pipe
*
* \param theRL Internal radius of left thickness reduction
* \param theWL Width of left thickness reduction
* \param theLtransL Length of left transition part
* \param theLthinL Length of left thin part
*
* \param theRR Internal radius of right thickness reduction
* \param theWR Width of right thickness reduction
* \param theLtransR Length of right transition part
* \param theLthinR Length of right thin part
*
* \param theRI Internal radius of incident thickness reduction
* \param theWI Width of incident thickness reduction
* \param theLtransI Length of incident transition part
* \param theLthinI Length of incident thin part
*
* \param theRF Radius of curvature of fillet.
* \param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=true)
* \param theP1 1st junction point of main pipe
* \param theP2 2nd junction point of main pipe
* \param theP3 Junction point of incident pipe
* \return List of GEOM_Object, containing the created shape and propagation groups.
*/
GEOM::ListOfGO MakePipeTShapeTRFilletWithPosition(in double theR1, in double theW1, in double theL1,
in double theR2, in double theW2, in double theL2,
in double theRL, in double theWL, in double theLtransL, in double theLthinL,
in double theRR, in double theWR, in double theLtransR, in double theLthinR,
in double theRI, in double theWI, in double theLtransI, in double theLthinI,
in double theRF, in boolean theHexMesh,
in GEOM::GEOM_Object theP1, in GEOM::GEOM_Object theP2,
in GEOM::GEOM_Object theP3);
/*!
* This function allows to create a disk already divided into blocks. It
* can be use to create divided pipes for later meshing in hexaedra.
* \param theR Radius of the disk
* \param theRatio Relative size of the central square diagonal against the disk diameter
* \param theOrientation Plane on which the disk will be built
* \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
* \return New GEOM_Object, containing the created shape.
*/
GEOM::GEOM_Object MakeDividedDisk (in double theR,
in double theRatio,
in short theOrientation,
in GEOM::pattern thePattern);
/*!
* \brief Create a Disk prepared for hexa meshing with given center, normal vector and radius.
* \param thePnt disk center.
* \param theVec Vector, normal to the plane of the disk.
* \param theR Disk radius.
* \param theRatio Relative size of the central square diagonal against the disk diameter
* \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
* \return New GEOM_Object, containing the created disk.
*/
GEOM::GEOM_Object MakeDividedDiskPntVecR ( in GEOM::GEOM_Object thePnt,
in GEOM::GEOM_Object theVec,
in double theR,
in double theRatio,
in GEOM::pattern thePattern);
/*!
* Builds a cylinder prepared for hexa meshes
* \param theR Radius of the cylinder
* \param theH Height of the cylinder
* \param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
* \return New GEOM_Object, containing the created shape.
*/
GEOM::GEOM_Object MakeDividedCylinder (in double theR,
in double theH,
in GEOM::pattern thePattern );
/*!
*
* Create a smoothing surface from a set of points
* \param thelPoints list of points. Compounds of ggpoints are accepted as well.
* \param theNbMax maximum number of Bezier pieces in the resulting surface.
* \param theDegMax maximum degree of the resulting BSpline surface
* \param theDMax specifies maximum value of the GeomPlate_PlateG0Criterion criterion.
* \return New GEOM_Object, containing the created shape.
*/
GEOM::GEOM_Object MakeSmoothingSurface (in GEOM::ListOfGO thelPoints,
in long theNbMax,
in long theDegMax,
in double theDMax);
/*@@ insert new functions before this line @@ do not remove this line @@*/
};
};
#endif // __AdvancedGEOM_IDL__