geom/src/GEOMGUI/GEOM_msg_en.ts

<!DOCTYPE TS>
<!--
  Copyright (C) 2007-2008  CEA/DEN, EDF R&D, OPEN CASCADE

  Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA

  See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com

-->
<TS version="1.1" >
    <context>
        <name>@default</name>
        <message>
            <source>CHANGE_ORIENTATION_NEW_OBJ_NAME</source>
            <translation>Invert</translation>
        </message>
        <message>
            <source>CLOSE_CONTOUR_NEW_OBJ_NAME</source>
            <translation>CloseContour</translation>
        </message>
        <message>
            <source>DEP_OBJECT</source>
            <translation>Selected object has been used to create another one.
It can't be deleted </translation>
        </message>
        <message>
            <source>DEVIDE_EDGE_NEW_OBJECT_NAME</source>
            <translation>NewObject</translation>
        </message>
        <message>
            <source>ERROR_SHAPE_TYPE</source>
            <translation>Object of incorrect type selected!
Please, select face, shell or solid and try again</translation>
        </message>
	<message>
	    <source> iErr : 10</source>
	    <translation>the Classifier is NULL</translation>
	</message>
	<message>
	    <source> iErr : 11</source>
	    <translation>the Shape is NULL</translation>
	</message>
	<message>
	    <source> iErr : 12</source>
	    <translation>Unallowed Type of Subshape</translation>
	</message>
	<message>
	    <source> iErr : 13</source>
	    <translation>Unallowed State</translation>
	</message>
	<message>
	    <source> iErr : 15</source>
	    <translation>Unallowed Surface Type</translation>
	</message>
	<message>
	    <source> iErr : 20</source>
	    <translation>Triangulation is not Found</translation>
	</message>
	<message>
	    <source> iErr : 30</source>
	    <translation>Can not Obtain the Line From the Link</translation>
	</message>
	<message>
	    <source> iErr : 40</source>
	    <translation>A Point Can Not Be Classified</translation>
	</message>
	<message>
	    <source> iErr : 41</source>
	    <translation>Invalid Data for Classifier</translation>
	</message>
        <message>
            <source>GEOM_2D_CONTINUTY</source>
            <translation>2D continuity</translation>
        </message>
        <message>
            <source>GEOM_2D_CURVE_MODE</source>
            <translation>2D curve mode</translation>
        </message>
        <message>
            <source>GEOM_2D_TOLERANCE</source>
            <translation>2D tolerance</translation>
        </message>
        <message>
            <source>GEOM_3D_CONTINUTY</source>
            <translation>3D continuity</translation>
        </message>
        <message>
            <source>GEOM_3D_CURVE_MODE</source>
            <translation>3D curve mode</translation>
        </message>
        <message>
            <source>GEOM_3D_TOLERANCE</source>
            <translation>3D tolerance</translation>
        </message>
        <message>
            <source>GEOM_3_POINTS</source>
            <translation>3 points</translation>
        </message>
        <message>
            <source>GEOM_ADD_POINT</source>
            <translation>Add point</translation>
        </message>
        <message>
            <source>GEOM_ANGLE</source>
            <translation>Angle :</translation>
        </message>
        <message>
            <source>GEOM_ANGLE_1</source>
            <translation>Angle</translation>
        </message>
        <message>
            <source>GEOM_ARC</source>
            <translation>Arc</translation>
        </message>
        <message>
            <source>GEOM_ARCHIMEDE</source>
            <translation>Archimede</translation>
        </message>
        <message>
            <source>GEOM_ARCHIMEDE_TITLE</source>
            <translation>Archimede Construction</translation>
        </message>
        <message>
            <source>GEOM_ARC_TITLE</source>
            <translation>Arc Construction</translation>
        </message>
        <message>
            <source>GEOM_ARGUMENTS</source>
            <translation>Arguments</translation>
        </message>
        <message>
            <source>GEOM_AXE_MIRROR</source>
            <translation>Axe Mirror</translation>
        </message>
        <message>
            <source>GEOM_AXIS</source>
            <translation>Axis</translation>
        </message>
        <message>
            <source>GEOM_BASE</source>
            <translation>Base</translation>
        </message>
        <message>
            <source>GEOM_BASE_OBJECT</source>
            <translation>Base Object</translation>
        </message>
        <message>
            <source>GEOM_BASE_POINT</source>
            <translation>Base Point</translation>
        </message>
        <message>
            <source>GEOM_BEZIER</source>
            <translation>Bezier</translation>
        </message>
        <message>
            <source>GEOM_BINORMAL</source>
            <translation>BiNormal</translation>
        </message>
        <message>
            <source>GEOM_BLOCK</source>
            <translation>Hexahedral Solid</translation>
        </message>
        <message>
            <source>GEOM_BLOCKS_COMPOUND</source>
            <translation>BlocksCompound</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_EXPLODE</source>
            <translation>Sub Blocks</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_EXPLODE_TITLE</source>
            <translation>Sub Blocks Selection</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_MULTITRSF</source>
            <translation>Block Multi-Transformation</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_MULTITRSF_DOUBLE</source>
            <translation>Multi-Transformation Double</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_MULTITRSF_SIMPLE</source>
            <translation>Multi-Transformation Simple</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_MULTITRSF_TITLE</source>
            <translation>Block Multi-Transformation</translation>
        </message>
        <message>
            <source>GEOM_BLOCK_TITLE</source>
            <translation>Hexahedral Solid Construction</translation>
        </message>
        <message>
            <source>GEOM_BNDBOX</source>
            <translation>Bounding Box</translation>
        </message>
        <message>
            <source>GEOM_BNDBOX_OBJDIM</source>
            <translation>Object And Its Dimensions</translation>
        </message>
        <message>
            <source>GEOM_BNDBOX_TITLE</source>
            <translation>Bounding Box Informations</translation>
        </message>
        <message>
            <source>GEOM_BOX</source>
            <translation>Box</translation>
        </message>
        <message>
            <source>GEOM_BOX_OBJ</source>
            <translation>Dimensions At Origin</translation>
        </message>
        <message>
            <source>GEOM_BOX_TITLE</source>
            <translation>Box Construction</translation>
        </message>
        <message>
            <source>GEOM_BSplineRestriction</source>
            <translation>BSplineRestriction</translation>
        </message>
        <message>
            <source>GEOM_BUT_APPLY</source>
            <translation>&amp;Apply</translation>
        </message>
        <message>
            <source>GEOM_BUT_CANCEL</source>
            <translation>&amp;Cancel</translation>
        </message>
        <message>
            <source>GEOM_BUT_CLOSE</source>
            <translation>&amp;Close</translation>
        </message>
        <message>
            <source>GEOM_BUT_CLOSE_SKETCH</source>
            <translation>Sketch Closure</translation>
        </message>
        <message>
            <source>GEOM_BUT_END_SKETCH</source>
            <translation>Sketch Validation</translation>
        </message>
        <message>
            <source>GEOM_BUT_EXPLODE</source>
            <translation>&amp;Explode</translation>
        </message>
        <message>
            <source>GEOM_BUT_HELP</source>
            <translation>&amp;Help</translation>
        </message>
        <message>
            <source>GEOM_BUT_NO</source>
            <translation>&amp;No</translation>
        </message>
        <message>
            <source>GEOM_BUT_OK</source>
            <translation>O&amp;k</translation>
        </message>
        <message>
            <source>GEOM_BUT_APPLY_AND_CLOSE</source>
            <translation>A&amp;pply and Close</translation>
        </message>
        <message>
            <source>GEOM_BUT_YES</source>
            <translation>&amp;Yes</translation>
        </message>
        <message>
            <source>GEOM_BY_LENGTH</source>
            <translation>By length</translation>
        </message>
        <message>
            <source>GEOM_BY_PARAMETER</source>
            <translation>By parameter</translation>
        </message>
        <message>
            <source>GEOM_CENTER</source>
            <translation>Center</translation>
        </message>
        <message>
            <source>GEOM_CENTER_POINT</source>
            <translation>Center Point</translation>
        </message>
        <message>
            <source>GEOM_CENTRAL_POINT</source>
            <translation>Central Point</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER</source>
            <translation>Chamfer</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_ABORT</source>
            <translation>Chamfer can't be computed with %1 and %2</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_ALL</source>
            <translation>Chamfer On Whole Shape</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_EDGES</source>
            <translation>Chamfer On Edges From Shape</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_FACES</source>
            <translation>Chamfer On Faces From Shape</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_TITLE</source>
            <translation>Chamfer Construction</translation>
        </message>
        <message>
            <source>GEOM_CHANGE_ORIENTATION</source>
            <translation>Objects to change orientation</translation>
        </message>
        <message>
            <source>GEOM_CHANGE_ORIENTATION_TITLE</source>
            <translation>Change orientation</translation>
        </message>
        <message>
            <source>GEOM_CHECK_BLOCKS_COMPOUND</source>
            <translation>Check and Improve Blocks Compound</translation>
        </message>
        <message>
            <source>GEOM_CHECK_BLOCKS_COMPOUND_ERRORS</source>
            <translation>Errors</translation>
        </message>
        <message>
            <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_ERRORS</source>
            <translation>The Compound of Blocks has errors</translation>
        </message>
        <message>
            <source>GEOM_CHECK_BLOCKS_COMPOUND_HAS_NO_ERRORS</source>
            <translation>The Compound of Blocks has no errors</translation>
        </message>
        <message>
            <source>GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES</source>
            <translation>Incriminated Sub-Shapes</translation>
        </message>
        <message>
            <source>GEOM_CHECK_INFOS</source>
            <translation>Object And Its Topological Information</translation>
        </message>
        <message>
            <source>GEOM_CHECK_SHAPE</source>
            <translation>Check Shape</translation>
        </message>
        <message>
            <source>GEOM_CHECK_TITLE</source>
            <translation>Check Shape Information</translation>
        </message>
        <message>
            <source>GEOM_CIRCLE</source>
            <translation>Circle</translation>
        </message>
        <message>
            <source>GEOM_CIRCLE_TITLE</source>
            <translation>Circle Construction</translation>
        </message>
        <message>
            <source>GEOM_CLOSECONTOUR_TITLE</source>
            <translation>Close contour</translation>
        </message>
        <message>
            <source>GEOM_CMASS</source>
            <translation>Center Of Mass</translation>
        </message>
        <message>
            <source>GEOM_CMASS_TITLE</source>
            <translation>Center Of Mass Construction</translation>
        </message>
        <message>
            <source>GEOM_COMMON</source>
            <translation>Common</translation>
        </message>
        <message>
            <source>GEOM_COMMON_TITLE</source>
            <translation>Common Of Two Objects</translation>
        </message>
        <message>
            <source>GEOM_COMPOUND</source>
            <translation>Compound</translation>
        </message>
        <message>
            <source>GEOM_COMPOUNDSOLID</source>
            <translation>CompSolid</translation>
        </message>
        <message>
            <source>GEOM_COMPOUND_TITLE</source>
            <translation>Create A Compound</translation>
        </message>
        <message>
            <source>GEOM_CONE</source>
            <translation>Cone</translation>
        </message>
        <message>
            <source>GEOM_CONE_TITLE</source>
            <translation>Cone Construction</translation>
        </message>
        <message>
            <source>GEOM_CONFIRM</source>
            <translation>Confirm operation</translation>
        </message>
        <message>
            <source>GEOM_CONFIRM_INFO</source>
            <translation>Shape contains %1 sub shapes !</translation>
        </message>
        <message>
            <source>GEOM_COOR</source>
            <translation>Coord. :</translation>
        </message>
        <message>
            <source>GEOM_COORDINATES</source>
            <translation>Coordinates</translation>
        </message>
        <message>
            <source>GEOM_CREATE_COPY</source>
            <translation>Create a copy</translation>
        </message>
        <message>
            <source>GEOM_CREATE_SINGLE_SOLID</source>
            <translation>Create a single solid</translation>
        </message>
        <message>
            <source>GEOM_CURVE</source>
            <translation>Curve</translation>
        </message>
        <message>
            <source>GEOM_CURVE_CONTINUTY</source>
            <translation>Curve continuity</translation>
        </message>
        <message>
            <source>GEOM_CURVE_TITLE</source>
            <translation>Curve Construction</translation>
        </message>
        <message>
            <source>GEOM_CUT</source>
            <translation>Cut</translation>
        </message>
        <message>
            <source>GEOM_CUT_TITLE</source>
            <translation>Cut Of Two Objects</translation>
        </message>
        <message>
            <source>GEOM_CYLINDER</source>
            <translation>Cylinder</translation>
        </message>
        <message>
            <source>GEOM_CYLINDER_TITLE</source>
            <translation>Cylinder Construction</translation>
        </message>
        <message>
            <source>GEOM_D1</source>
            <translation>D1 :</translation>
        </message>
        <message>
            <source>GEOM_D2</source>
            <translation>D2 :</translation>
        </message>
        <message>
            <source>GEOM_DETECT</source>
            <translation>Detect</translation>
        </message>
        <message>
            <source>GEOM_DIAGONAL_POINTS</source>
            <translation>Diagonal Points</translation>
        </message>
	<message>
            <source>GEOM_DISK</source>
            <translation>Disk</translation>
        </message>
	<message>
            <source>GEOM_DISK_TITLE</source>
            <translation>Create A Disk</translation>
        </message>
        <message>
            <source>GEOM_DIMENSIONS</source>
            <translation>Dimensions</translation>
        </message>
        <message>
            <source>GEOM_DISTANCE</source>
            <translation>Distance</translation>
        </message>
        <message>
            <source>GEOM_DIVIDE_EDGE_TITLE</source>
            <translation>Addition of point</translation>
        </message>
        <message>
            <source>GEOM_DX</source>
            <translation>Dx :</translation>
        </message>
        <message>
            <source>GEOM_DY</source>
            <translation>Dy :</translation>
        </message>
        <message>
            <source>GEOM_DZ</source>
            <translation>Dz :</translation>
        </message>
        <message>
            <source>GEOM_DropSmallEdges</source>
            <translation>DropSmallEdges</translation>
        </message>
        <message>
            <source>GEOM_EDGE</source>
            <translation>Edge</translation>
        </message>
        <message>
            <source>GEOM_EDGE_TITLE</source>
            <translation>Create An Edge</translation>
        </message>
        <message>
            <source>GEOM_ELLIPSE</source>
            <translation>Ellipse</translation>
        </message>
        <message>
            <source>GEOM_ELLIPSE_ERROR_1</source>
            <translation>Error creating ellipse.  Reason: minor radius is greater than major radius.</translation>
        </message>
        <message>
            <source>GEOM_ELLIPSE_TITLE</source>
            <translation>Ellipse Construction</translation>
        </message>
        <message>
            <source>GEOM_END_LCS</source>
            <translation>End LCS</translation>
        </message>
        <message>
            <source>GEOM_ERROR</source>
            <translation>Error</translation>
        </message>
        <message>
            <source>GEOM_ERROR_STATUS</source>
            <translation>Operation status</translation>
        </message>
        <message>
            <source>GEOM_ERR_GET_ENGINE</source>
            <translation>Failed to obtain GEOM Engine component.  Reload Geometry module and try again.</translation>
        </message>
        <message>
            <source>GEOM_ERR_LIB_NOT_FOUND</source>
            <translation>GUI library corresponding to the user action can not be found or loaded</translation>
        </message>
        <message>
            <source>GEOM_EXTRUSION</source>
            <translation>Extrusion</translation>
        </message>
        <message>
            <source>GEOM_EXTRUSION_BSV</source>
            <translation>Base Shape + Vector</translation>
        </message>
        <message>
            <source>GEOM_EXTRUSION_BSV_2P</source>
            <translation>Base Shape + 2 Points</translation>
        </message>
	<message>
            <source>GEOM_EXTRUSION_DXDYDZ</source>
            <translation>Base Shape + DX DY DZ Vector</translation>
        </message>
        <message>
            <source>GEOM_EXTRUSION_TITLE</source>
            <translation>Construction by Extrusion</translation>
        </message>
        <message>
            <source>GEOM_FACE</source>
            <translation>Face</translation>
        </message>
	<message>
            <source>GEOM_LCS</source>
            <translation>Local coordinate system</translation>
        </message>
        <message>
            <source>GEOM_FACES</source>
            <translation>Faces</translation>
        </message>
        <message>
            <source>GEOM_FACE_FFW</source>
            <translation>Face creation from wires and/or edges</translation>
        </message>
        <message>
            <source>GEOM_FACE_OPT</source>
            <translation>Try to create a planar face</translation>
        </message>
        <message>
            <source>GEOM_FACE_OR_LCS</source>
            <translation>Face or LCS</translation>
        </message>
        <message>
            <source>GEOM_FACE_SELECTION</source>
            <translation>Face Selection</translation>
        </message>
        <message>
            <source>GEOM_FACE_TITLE</source>
            <translation>Create A Face</translation>
        </message>
        <message>
            <source>GEOM_FILLET</source>
            <translation>Fillet</translation>
        </message>
	<message>
            <source>GEOM_FILLET_2D</source>
            <translation>Fillet 2D</translation>
        </message>
        <message>
            <source>GEOM_FILLET_ABORT</source>
            <translation>Fillet can't be computed with radius %1</translation>
        </message>
        <message>
            <source>GEOM_FILLET_ALL</source>
            <translation>Fillet On Whole Shape</translation>
        </message>
        <message>
            <source>GEOM_FILLET_EDGES</source>
            <translation>Fillet On Edges From Shape</translation>
        </message>
        <message>
            <source>GEOM_FILLET_FACES</source>
            <translation>Fillet On Faces From Shape</translation>
        </message>
	<message>
            <source>GEOM_FILLET_VERTEXES</source>
            <translation>Fillet On Vertexes From Face</translation>
        </message>
        <message>
            <source>GEOM_FILLET_TITLE</source>
            <translation>Fillet Construction</translation>
        </message>
	<message>
            <source>GEOM_FILLET_2D_TITLE</source>
            <translation>2D Fillet Construction</translation>
        </message>
        <message>
            <source>GEOM_FILLING</source>
            <translation>Filling</translation>
        </message>
        <message>
            <source>GEOM_FILLING_ARG</source>
            <translation>Arguments And Parameters</translation>
        </message>
        <message>
            <source>GEOM_FILLING_COMPOUND</source>
            <translation>Edges compound</translation>
        </message>
        <message>
            <source>GEOM_FILLING_MAX_DEG</source>
            <translation>Max deg</translation>
        </message>
        <message>
            <source>GEOM_FILLING_MIN_DEG</source>
            <translation>Min deg</translation>
        </message>
        <message>
            <source>GEOM_FILLING_NB_ITER</source>
            <translation>Nb. Iter :</translation>
        </message>
        <message>
            <source>GEOM_FILLING_TITLE</source>
            <translation>Filling Surface With Edges</translation>
        </message>
        <message>
            <source>GEOM_FILLING_TOL_2D</source>
            <translation>Tol. 2D :</translation>
        </message>
        <message>
            <source>GEOM_FILLING_TOL_3D</source>
            <translation>Tol. 3D :</translation>
        </message>
        <message>
            <source>GEOM_FREE_BOUNDARIES</source>
            <translation>Free boundaries</translation>
        </message>
        <message>
            <source>GEOM_FREE_BOUNDS_ERROR</source>
            <translation>Object is not selected</translation>
        </message>
        <message>
            <source>GEOM_FREE_BOUNDS_MSG</source>
            <translation>Number of free boundaries detected: %1 (%2 closed, %3 open)</translation>
        </message>
        <message>
            <source>GEOM_FREE_BOUNDS_TLT</source>
            <translation>Free boundary detection</translation>
        </message>
        <message>
            <source>GEOM_FREE_FACES</source>
            <translation>Free faces</translation>
        </message>
        <message>
            <source>GEOM_FREE_FACES_TITLE</source>
            <translation>Free faces</translation>
        </message>
        <message>
            <source>GEOM_FUSE</source>
            <translation>Fuse</translation>
        </message>
        <message>
            <source>GEOM_FUSE_TITLE</source>
            <translation>Fuse Two Objects</translation>
        </message>
        <message>
            <source>GEOM_FixFaceSize</source>
            <translation>FixFaceSize</translation>
        </message>
        <message>
            <source>GEOM_FixShape</source>
            <translation>FixShape</translation>
        </message>
        <message>
            <source>GEOM_GLUE</source>
            <translation>Glue</translation>
        </message>
        <message>
            <source>GEOM_GLUE_TITLE</source>
            <translation>Glue faces</translation>
        </message>
        <message>
            <source>GEOM_HEIGHT</source>
            <translation>Height :</translation>
        </message>
        <message>
            <source>GEOM_HOLES</source>
            <translation>Holes</translation>
        </message>
        <message>
            <source>GEOM_IDENTICAL_NAMES_SELECT_BY_MOUSE</source>
            <translation>Identical names : select by mouse !</translation>
        </message>
        <message>
            <source>GEOM_IMPORT</source>
            <translation>Imported_Shape</translation>
        </message>
        <message>
            <source>GEOM_INCORRECT_INPUT</source>
            <translation>Some parameters are missing</translation>
        </message>
        <message>
            <source>GEOM_INERTIA_CONSTR</source>
            <translation>Matrix And Moments Of Inertia</translation>
        </message>
        <message>
            <source>GEOM_INERTIA_I</source>
            <translation>%1:1 :</translation>
        </message>
        <message>
            <source>GEOM_INERTIA_IXYZ</source>
            <translation>IX &amp; IY &amp; IZ :</translation>
        </message>
        <message>
            <source>GEOM_INERTIA_TITLE</source>
            <translation>Calculs Of Inertia</translation>
        </message>
        <message>
            <source>GEOM_INF_LOADED</source>
            <translation>File %1 loaded.</translation>
        </message>
        <message>
            <source>GEOM_INTERNAL_WIRES</source>
            <translation>Internal wires</translation>
        </message>
        <message>
            <source>GEOM_INTERPOL</source>
            <translation>Interpolation</translation>
        </message>
        <message>
            <source>GEOM_KEEP_OBJECT</source>
            <translation>Keep Object</translation>
        </message>
        <message>
            <source>GEOM_LENGTH</source>
            <translation>Length :</translation>
        </message>
        <message>
            <source>GEOM_LINE</source>
            <translation>Line</translation>
        </message>
        <message>
            <source>GEOM_LINE_TITLE</source>
            <translation>Line Construction</translation>
        </message>
        <message>
            <source>GEOM_MAIN_OBJECT</source>
            <translation>Main Object</translation>
        </message>
        <message>
            <source>GEOM_MARKER</source>
            <translation>Marker</translation>
        </message>
        <message>
            <source>GEOM_MARKER_TITLE</source>
            <translation>Create marker</translation>
        </message>
        <message>
            <source>GEOM_MATERIAL_ID</source>
            <translation>Material ID:</translation>
        </message>
        <message>
            <source>GEOM_MATERIAL_MATERIAL</source>
            <translation>Material</translation>
        </message>
        <message>
            <source>GEOM_MATERIAL_SET</source>
            <translation>&lt;&lt; Set</translation>
        </message>
        <message>
            <source>GEOM_MATERIAL_SHAPE</source>
            <translation>Shapes</translation>
        </message>
        <message>
            <source>GEOM_MATERIAL_TITLE</source>
            <translation>Define materials for Dominant Fuse</translation>
        </message>
        <message>
            <source>GEOM_MATRIX</source>
            <translation>Matrix :</translation>
        </message>
        <message>
            <source>GEOM_MAX</source>
            <translation>Max :</translation>
        </message>
        <message>
            <source>GEOM_MAX_3D_TOLERANCE</source>
            <translation>Max 3D tolerance</translation>
        </message>
        <message>
            <source>GEOM_MAX_TOLERANCE</source>
            <translation>Max tolerance</translation>
        </message>
        <message>
            <source>GEOM_MEN_ALL_FILES</source>
            <translation>All Files ( * )</translation>
        </message>
        <message>
            <source>GEOM_MEN_ANGLE</source>
            <translation>Angle :</translation>
        </message>
        <message>
            <source>GEOM_MEN_COMPONENT</source>
            <translation>Geometry</translation>
        </message>
        <message>
            <source>GEOM_MEN_ENTER_ANGLE</source>
            <translation>Enter An Angle In Degrees</translation>
        </message>
        <message>
            <source>GEOM_MEN_EXPORT</source>
            <translation>Export</translation>
        </message>
        <message>
            <source>GEOM_MEN_IMPORT</source>
            <translation>Import</translation>
        </message>
        <message>
            <source>GEOM_MEN_ISOS</source>
            <translation>Select Number Of Isos</translation>
        </message>
        <message>
            <source>GEOM_MEN_ISOU</source>
            <translation>Isos U :</translation>
        </message>
        <message>
            <source>GEOM_MEN_ISOV</source>
            <translation>Isos V :</translation>
        </message>
        <message>
            <source>GEOM_MEN_POPUP_NAME</source>
            <translation>%1 Objects</translation>
        </message>
        <message>
            <source>GEOM_MEN_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>GEOM_MEN_SKETCHER_X</source>
            <translation>Enter a Length to Set X</translation>
        </message>
        <message>
            <source>GEOM_MEN_SKETCHER_Y</source>
            <translation>Enter a Length to Set Y</translation>
        </message>
        <message>
            <source>GEOM_MEN_STEP_LABEL</source>
            <translation>Step :</translation>
        </message>
        <message>
            <source>GEOM_MEN_TRANSPARENCY</source>
            <translation>Transparency</translation>
        </message>
        <message>
            <source>GEOM_MEN_TRANSPARENCY_LABEL</source>
            <translation>Transparency :</translation>
        </message>
        <message>
            <source>GEOM_MEN_WIREFRAME</source>
            <translation>Wireframe</translation>
        </message>
        <message>
            <source>GEOM_MEN_X</source>
            <translation>X :</translation>
        </message>
        <message>
            <source>GEOM_MEN_Y</source>
            <translation>Y :</translation>
        </message>
        <message>
            <source>GEOM_MESHING_DEFLECTION</source>
            <translation>Meshing Deflect. :</translation>
        </message>
        <message>
            <source>GEOM_MIN</source>
            <translation>Min :</translation>
        </message>
        <message>
            <source>GEOM_MINDIST_OBJ</source>
            <translation>Objects And Results</translation>
        </message>
        <message>
            <source>GEOM_MINDIST_TITLE</source>
            <translation>Minimun Distance Between Two Objects</translation>
        </message>
        <message>
            <source>GEOM_MIRROR</source>
            <translation>Mirror</translation>
        </message>
        <message>
            <source>GEOM_MIRROR_TITLE</source>
            <translation>Mirror An Object</translation>
        </message>
        <message>
            <source>GEOM_MULTIROTATION</source>
            <translation>Multi-Rotation</translation>
        </message>
        <message>
            <source>GEOM_MULTIROTATION_DOUBLE</source>
            <translation>Multi Rotation Double</translation>
        </message>
        <message>
            <source>GEOM_MULTIROTATION_SIMPLE</source>
            <translation>Multi Rotation Simple</translation>
        </message>
        <message>
            <source>GEOM_MULTIROTATION_TITLE</source>
            <translation>Multi-Rotation</translation>
        </message>
        <message>
            <source>GEOM_MULTITRANSLATION</source>
            <translation>Multi-Translation</translation>
        </message>
        <message>
            <source>GEOM_MULTITRANSLATION_DOUBLE</source>
            <translation>Multi Translation Double</translation>
        </message>
        <message>
            <source>GEOM_MULTITRANSLATION_SIMPLE</source>
            <translation>Multi Translation Simple</translation>
        </message>
        <message>
            <source>GEOM_MULTITRANSLATION_TITLE</source>
            <translation>Multi-Translation</translation>
        </message>
        <message>
            <source>GEOM_NAME_INCORRECT</source>
            <translation>Object name not found</translation>
        </message>
        <message>
            <source>GEOM_NB_BLOCKS_NO_OTHERS</source>
            <translation>There are %1 specified blocks and NO other solids</translation>
        </message>
        <message>
            <source>GEOM_NB_BLOCKS_SOME_OTHERS</source>
            <translation>There are %1 specified blocks and some other solids</translation>
        </message>
        <message>
            <source>GEOM_NB_TIMES</source>
            <translation>Nb. Times :</translation>
        </message>
        <message>
            <source>GEOM_NB_TIMES_U</source>
            <translation>Nb. Times U :</translation>
        </message>
        <message>
            <source>GEOM_NB_TIMES_V</source>
            <translation>Nb. Times V :</translation>
        </message>
        <message>
            <source>GEOM_NODES</source>
            <translation>Nodes</translation>
        </message>
        <message>
            <source>GEOM_NUM_SPLIT_POINTS</source>
            <translation>Number of splitting points</translation>
        </message>
        <message>
            <source>GEOM_OBJECT</source>
            <translation>Object</translation>
        </message>
	<message>
            <source>GEOM_OBJECT_TYPE</source>
            <translation>Object Type</translation>
        </message>
        <message>
            <source>GEOM_OBJECTS</source>
            <translation>Objects</translation>
        </message>
        <message>
            <source>GEOM_OBJECT_I</source>
            <translation>Object %1</translation>
        </message>
        <message>
            <source>GEOM_OBJECT_RESULT</source>
            <translation>Object And Result</translation>
        </message>
        <message>
            <source>GEOM_OFFSET</source>
            <translation>Offset</translation>
        </message>
        <message>
            <source>GEOM_OFFSET_TITLE</source>
            <translation>Offset Surface</translation>
        </message>
        <message>
            <source>GEOM_OPERATIONS</source>
            <translation>Operations</translation>
        </message>
        <message>
            <source>GEOM_ORIENTATION</source>
            <translation>Orientation</translation>
        </message>
        <message>
            <source>GEOM_ORIENTATION_OPT</source>
            <translation>Reverse orientation with normal vectors simulation</translation>
        </message>
        <message>
            <source>GEOM_ORIENTATION_TITLE</source>
            <translation>Change Orientation</translation>
        </message>
        <message>
            <source>GEOM_PARAMETER</source>
            <translation>Parameter :</translation>
        </message>
        <message>
            <source>GEOM_PARAMETERS</source>
            <translation>Parameters</translation>
        </message>
        <message>
            <source>GEOM_PARAM_POINT</source>
            <translation>Parametric point</translation>
        </message>
        <message>
            <source>GEOM_PARTITION</source>
            <translation>Partition</translation>
        </message>
        <message>
            <source>GEOM_PARTITION_HALFSPACE</source>
            <translation>Half-space partition</translation>
        </message>
        <message>
            <source>GEOM_PARTITION_ORIENTATION</source>
            <translation>Change Orientation</translation>
        </message>
        <message>
            <source>GEOM_PARTITION_TITLE</source>
            <translation>Partition Of Object With Tool</translation>
        </message>
        <message>
            <source>GEOM_PATH_OBJECT</source>
            <translation>Path Object</translation>
        </message>
        <message>
            <source>GEOM_PIPE</source>
            <translation>Pipe</translation>
        </message>
        <message>
            <source>GEOM_PIPE_TITLE</source>
            <translation>Pipe Construction</translation>
        </message>
	<message>
            <source>GEOM_SELECT_UNPUBLISHED_EDGES</source>
            <translation>Select unpublished edges</translation>
        </message>
        <message>
            <source>GEOM_PLANE</source>
            <translation>Plane</translation>
        </message>
        <message>
            <source>GEOM_PLANE_MIRROR</source>
            <translation>Plane Mirror</translation>
        </message>
        <message>
            <source>GEOM_PLANE_PV</source>
            <translation>Point + Vector</translation>
        </message>
        <message>
            <source>GEOM_PLANE_PVC</source>
            <translation>Point + Coordinate Vector</translation>
        </message>
        <message>
            <source>GEOM_PLANE_SIZE</source>
            <translation>Size of plane :</translation>
        </message>
        <message>
            <source>GEOM_PLANE_TITLE</source>
            <translation>Plane Construction</translation>
        </message>
        <message>
            <source>GEOM_POINT</source>
            <translation>Point</translation>
        </message>
        <message>
            <source>GEOM_POINT1</source>
            <translation>Point 1</translation>
        </message>
        <message>
            <source>GEOM_POINT2</source>
            <translation>Point 2</translation>
        </message>
        <message>
            <source>GEOM_POINT3</source>
            <translation>Point 3</translation>
        </message>
        <message>
            <source>GEOM_POINTS</source>
            <translation>Points</translation>
        </message>
        <message>
            <source>GEOM_POINT_I</source>
            <translation>Point %1</translation>
        </message>
        <message>
            <source>GEOM_POINT_MIRROR</source>
            <translation>Point Mirror</translation>
        </message>
        <message>
            <source>GEOM_POINT_TITLE</source>
            <translation>Point Construction</translation>
        </message>
        <message>
            <source>GEOM_POLYLINE</source>
            <translation>Polyline</translation>
        </message>
        <message>
            <source>GEOM_POSITION</source>
            <translation>Location</translation>
        </message>
        <message>
            <source>GEOM_POSITION_TITLE</source>
            <translation>Modify the Location of an Object</translation>
        </message>
        <message>
            <source>GEOM_PRECISION</source>
            <translation>Precision :</translation>
        </message>
        <message>
            <source>GEOM_PROPAGATE</source>
            <translation>Propagate</translation>
        </message>
        <message>
            <source>GEOM_PROPAGATE_TITLE</source>
            <translation>Propagate</translation>
        </message>
        <message>
            <source>GEOM_PROPERTIES</source>
            <translation>Basic Properties</translation>
        </message>
        <message>
            <source>GEOM_PROPERTIES_CONSTR</source>
            <translation>Object And Its Properties</translation>
        </message>
        <message>
            <source>GEOM_PROPERTIES_SURFACE</source>
            <translation>Surface is :</translation>
        </message>
        <message>
            <source>GEOM_PROPERTIES_TITLE</source>
            <translation>Basic Properties Informations</translation>
        </message>
        <message>
            <source>GEOM_PROPERTIES_VOLUME</source>
            <translation>Volume is :</translation>
        </message>
        <message>
            <source>GEOM_PRP_ABORT</source>
            <translation>Operation aborted</translation>
        </message>
        <message>
            <source>GEOM_PRP_COMMAND</source>
            <translation>No command associated with this id = %1.</translation>
        </message>
        <message>
            <source>GEOM_PRP_DONE</source>
            <translation>Operation done</translation>
        </message>
        <message>
            <source>GEOM_PRP_EXPORT</source>
            <translation>Exporting geometry to %1 ...</translation>
        </message>
        <message>
            <source>GEOM_PRP_LOADING</source>
            <translation>Loading %1 ...</translation>
        </message>
        <message>
            <source>GEOM_PRP_MIN_DIST</source>
            <translation>Min Distance not computed</translation>
        </message>
        <message>
            <source>GEOM_PRP_NOT_FOR_VTK_VIEWER</source>
            <translation>Not allowed in VTK viewer</translation>
        </message>
        <message>
            <source>GEOM_PRP_NULLSHAPE</source>
            <translation>Error, null or inappropriate shape !</translation>
        </message>
        <message>
            <source>GEOM_PRP_READY</source>
            <translation>Ready</translation>
        </message>
        <message>
            <source>GEOM_PRP_SELECT_EDGE</source>
            <translation>Select edges and click on Apply</translation>
        </message>
        <message>
            <source>GEOM_PRP_SELECT_FACE</source>
            <translation>Select faces to suppress and click on Ok/Apply</translation>
        </message>
        <message>
            <source>GEOM_PRP_SELECT_FIRST</source>
            <translation>Select main shape first</translation>
        </message>
        <message>
            <source>GEOM_PRP_SELECT_SUBSHAPES</source>
            <translation>Select Sub Shapes</translation>
        </message>
        <message>
            <source>GEOM_PRP_SHAPE_IN_STUDY</source>
            <translation>Main shape must be in the study before</translation>
        </message>
        <message>
            <source>GEOM_QUAD_FACE</source>
            <translation>Quadrangle Face</translation>
        </message>
        <message>
            <source>GEOM_QUAD_FACE_TITLE</source>
            <translation>Quadrangle Face Construction</translation>
        </message>
        <message>
            <source>GEOM_RADIUS</source>
            <translation>Radius :</translation>
        </message>
        <message>
            <source>GEOM_RADIUS_I</source>
            <translation>Radius %1 :</translation>
        </message>
        <message>
            <source>GEOM_RADIUS_MAJOR</source>
            <translation>Major radius :</translation>
        </message>
        <message>
            <source>GEOM_RADIUS_MINOR</source>
            <translation>Minor radius :</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT</source>
            <translation>Resulting Type</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_EDGE</source>
            <translation>Edge</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_FACE</source>
            <translation>Face</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_SHAPE</source>
            <translation>Shape</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_SHELL</source>
            <translation>Shell</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_SOLID</source>
            <translation>Solid</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_VERTEX</source>
            <translation>Vertex</translation>
        </message>
        <message>
            <source>GEOM_RECONSTRUCTION_LIMIT_WIRE</source>
            <translation>Wire</translation>
        </message>
        <message>
            <source>GEOM_REF_POINT</source>
            <translation>Point with reference</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_ALL_HOLES</source>
            <translation>Remove all holes</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_ALL_INT_WIRES</source>
            <translation>Remove all internal wires</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_HOLES_TITLE</source>
            <translation>Suppress holes</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_INTERNAL_WIRES_TITLE</source>
            <translation>Suppress internal wires</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_WEBS</source>
            <translation>Remove webs</translation>
        </message>
        <message>
            <source>GEOM_REQUIRED_DEGREE</source>
            <translation>Required degree</translation>
        </message>
        <message>
            <source>GEOM_REQUIRED_NUM_SEGMENTS</source>
            <translation>Required number of segments</translation>
        </message>
        <message>
            <source>GEOM_REVERSE</source>
            <translation>Reverse</translation>
        </message>
	<message>
            <source>GEOM_REVERSE_DIRECTION</source>
            <translation>Reverse Direction</translation>
        </message>
        <message>
            <source>GEOM_REVERSE_PLANE</source>
            <translation>Reverse the plane normal</translation>
        </message>
        <message>
            <source>GEOM_REVERSE_U</source>
            <translation>Reverse U</translation>
        </message>
        <message>
            <source>GEOM_REVERSE_V</source>
            <translation>Reverse V</translation>
        </message>
        <message>
            <source>GEOM_REVERSE_VECTOR</source>
            <translation>Reverse Vector</translation>
        </message>
        <message>
            <source>GEOM_REVOLUTION</source>
            <translation>Revolution</translation>
        </message>
        <message>
            <source>GEOM_REVOLUTION_TITLE</source>
            <translation>Construction By Revolution</translation>
        </message>
        <message>
            <source>GEOM_ROTATION</source>
            <translation>Rotation</translation>
        </message>
        <message>
            <source>GEOM_ROTATION_TITLE</source>
            <translation>Rotation Of An Object</translation>
        </message>
        <message>
            <source>GEOM_SCALE</source>
            <translation>Scale</translation>
        </message>
        <message>
            <source>GEOM_SCALE_FACTOR</source>
            <translation>Scale Factor :</translation>
        </message>
        <message>
            <source>GEOM_SCALE_TITLE</source>
            <translation>Scale An Object</translation>
        </message>
        <message>
            <source>GEOM_SECTION</source>
            <translation>Section</translation>
        </message>
        <message>
            <source>GEOM_SECTION_TITLE</source>
            <translation>Section Of Two Objects</translation>
        </message>
        <message>
            <source>GEOM_SELECTED_FACE</source>
            <translation>Selected face</translation>
        </message>
        <message>
            <source>GEOM_SELECTED_OBJECTS</source>
            <translation>Selected objects</translation>
        </message>
        <message>
            <source>GEOM_SELECTED_SHAPE</source>
            <translation>Selected shape</translation>
        </message>
        <message>
            <source>GEOM_SELECTION</source>
            <translation>Selection</translation>
        </message>
        <message>
            <source>GEOM_SET_MATERIALS</source>
            <translation>Set materials</translation>
        </message>
        <message>
            <source>GEOM_SEWING</source>
            <translation>Sewing</translation>
        </message>
        <message>
            <source>GEOM_SEWING_TITLE</source>
            <translation>Topological sewing</translation>
        </message>
        <message>
            <source>GEOM_SHAPE</source>
            <translation>Shape</translation>
        </message>
        <message>
            <source>GEOM_SHAPEPROCESS_TITLE</source>
            <translation>Shape Processing</translation>
        </message>
        <message>
            <source>GEOM_SHAPES</source>
            <translation>Shapes</translation>
        </message>
        <message>
            <source>GEOM_SHELL</source>
            <translation>Shell</translation>
        </message>
        <message>
            <source>GEOM_SHELLS</source>
            <translation>Shells</translation>
        </message>
        <message>
            <source>GEOM_SHELL_TITLE</source>
            <translation>Shell Construction</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_ABS</source>
            <translation>Absolute</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_ANGLE</source>
            <translation>Angle</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_ANGLE2</source>
            <translation>Angle :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_APPLY</source>
            <translation>Apply</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_ARC</source>
            <translation>Arc</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_DEST</source>
            <translation>Destination</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_DIR</source>
            <translation>Direction</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_DX2</source>
            <translation>DX :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_DY2</source>
            <translation>DY :</translation>
        </message>
	<message>
            <source>GEOM_SKETCHER_DZ2</source>
            <translation>DZ :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_EL</source>
            <translation>Element Type</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_LENGTH</source>
            <translation>Length</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_LENGTH2</source>
            <translation>Length :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_PER</source>
            <translation>Perpendicular</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_POINT</source>
            <translation>Point</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_POINT2</source>
            <translation>Point :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_RADIUS2</source>
            <translation>Radius :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_REL</source>
            <translation>Relative</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_SEGMENT</source>
            <translation>Segment</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_SEL</source>
            <translation>Selection</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_TAN</source>
            <translation>Tangent</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_TITLE</source>
            <translation>Sketch Construction</translation>
        </message>
	<message>
            <source>GEOM_3DSKETCHER_TITLE</source>
            <translation>3D Sketch Construction</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_TYPE</source>
            <translation>Type</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_UNDO</source>
            <translation>Undo</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_VALUES</source>
            <translation>Values</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_VX2</source>
            <translation>VX :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_VXVY</source>
            <translation>VX-VY</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_VY2</source>
            <translation>VY :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_X</source>
            <translation>X</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_X2</source>
            <translation>X :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_X3</source>
            <translation>Abs. X :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_Y</source>
            <translation>Y</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_Y2</source>
            <translation>Y :</translation>
        </message>
        <message>
            <source>GEOM_SKETCHER_Y3</source>
            <translation>Abs. Y :</translation>
        </message>
	<message>
            <source>GEOM_SKETCHER_Z2</source>
            <translation>Z :</translation>
        </message>
	<message>
            <source>GEOM_3DSKETCHER</source>
            <translation>3D Sketcher</translation>
        </message>
	<message>
            <source>GEOM_COORDINATES_TYPE</source>
            <translation>Coordinates Type</translation>
        </message>
        <message>
            <source>GEOM_SOLID</source>
            <translation>Solid</translation>
        </message>
        <message>
            <source>GEOM_SOLID_TITLE</source>
            <translation>Solid Construction</translation>
        </message>
        <message>
            <source>GEOM_SPHERE</source>
            <translation>Sphere</translation>
        </message>
        <message>
            <source>GEOM_SPHERE_CR</source>
            <translation>Center + Radius</translation>
        </message>
        <message>
            <source>GEOM_SPHERE_RO</source>
            <translation>Radius At Origin</translation>
        </message>
        <message>
            <source>GEOM_SPHERE_TITLE</source>
            <translation>Sphere Construction</translation>
        </message>
        <message>
            <source>GEOM_SPLINE</source>
            <translation>Spline</translation>
        </message>
        <message>
            <source>GEOM_SPLINE_TITLE</source>
            <translation>Spline Construction</translation>
        </message>
        <message>
            <source>GEOM_START_LCS</source>
            <translation>Start LCS</translation>
        </message>
	<message>
            <source>SELECT_UNPUBLISHED_EDGES</source>
            <translation>Select unpublished edges</translation>
        </message>
        <message>
            <source>GEOM_STEP</source>
            <translation>Step :</translation>
        </message>
        <message>
            <source>GEOM_STEP_TITLE</source>
            <translation>Step value for GUI constructions</translation>
        </message>
        <message>
            <source>GEOM_STEP_U</source>
            <translation>Step U :</translation>
        </message>
        <message>
            <source>GEOM_STEP_V</source>
            <translation>Step V :</translation>
        </message>
        <message>
            <source>GEOM_STUDY_LOCKED</source>
            <translation>The active study is locked and therefore cannot be modified</translation>
        </message>
        <message>
            <source>GEOM_SUBSHAPE_SELECT</source>
            <translation>Select Sub Shapes</translation>
        </message>
        <message>
            <source>GEOM_SUBSHAPE_TITLE</source>
            <translation>Sub Shapes Selection</translation>
        </message>
        <message>
            <source>GEOM_SUBSHAPE_TYPE</source>
            <translation>Sub Shapes Type :</translation>
        </message>
        <message>
            <source>GEOM_SUB_SHAPE</source>
            <translation>Sub Shapes</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_FACE_SHELL</source>
            <translation>Face or shell</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_SELECTFACE</source>
            <translation>Select the face with hole</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_SELECTFACE_END</source>
            <translation>Select end face (if hole traversing)</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_SELECTWIRE</source>
            <translation>Select wire on face</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_SELECTWIRE_END</source>
            <translation>Select end wire (if hole traversing)</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_SELECT_HOLES_ON_FACE</source>
            <translation>Select hole(s) on the face</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESSHOLE_TITLE</source>
            <translation>Suppress holes</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESS_RESULT</source>
            <translation>Suppress Result</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESS_RESULT_INSIDE</source>
            <translation>Inside</translation>
        </message>
        <message>
            <source>GEOM_SUPPRESS_RESULT_OUTSIDE</source>
            <translation>Outside</translation>
        </message>
        <message>
            <source>GEOM_SUPRESSFACE</source>
            <translation>Supress Face</translation>
        </message>
        <message>
            <source>GEOM_SUPRESSFACE_SELECT</source>
            <translation>Select Faces To Suppress</translation>
        </message>
        <message>
            <source>GEOM_SUPRESSFACE_TITLE</source>
            <translation>Suppress Faces In An Object</translation>
        </message>
        <message>
            <source>GEOM_SURFACE_CONTINUTY</source>
            <translation>Surface continuity</translation>
        </message>
        <message>
            <source>GEOM_SURFACE_MODE</source>
            <translation>Surface mode</translation>
        </message>
        <message>
            <source>GEOM_SURFCONE</source>
            <translation>Conical Face</translation>
        </message>
        <message>
            <source>GEOM_SURFCYLINDER</source>
            <translation>Cylindrical Face</translation>
        </message>
        <message>
            <source>GEOM_SURFSPHERE</source>
            <translation>Spherical Face</translation>
        </message>
        <message>
            <source>GEOM_SURFTORUS</source>
            <translation>Toroidal Face</translation>
        </message>
        <message>
            <source>GEOM_SameParameter</source>
            <translation>SameParameter</translation>
        </message>
        <message>
            <source>GEOM_SplitAngle</source>
            <translation>SplitAngle</translation>
        </message>
        <message>
            <source>GEOM_SplitClosedFaces</source>
            <translation>SplitClosedFaces</translation>
        </message>
        <message>
            <source>GEOM_SplitContinuity</source>
            <translation>SplitContinuity</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE</source>
            <translation>Tolerance</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE_CONSTR</source>
            <translation>Object And Its Tolerances</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE_EDGE</source>
            <translation>Edge :</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE_FACE</source>
            <translation>Face :</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE_TITLE</source>
            <translation>Maximum Tolerance</translation>
        </message>
        <message>
            <source>GEOM_TOLERANCE_VERTEX</source>
            <translation>Vertex :</translation>
        </message>
        <message>
            <source>GEOM_TOOL_OBJECT</source>
            <translation>Tool Object</translation>
        </message>
        <message>
            <source>GEOM_TORUS</source>
            <translation>Torus</translation>
        </message>
        <message>
            <source>GEOM_TORUS_TITLE</source>
            <translation>Torus Construction</translation>
        </message>
        <message>
            <source>GEOM_TRANSLATION</source>
            <translation>Translation</translation>
        </message>
        <message>
            <source>GEOM_TRANSLATION_COOR</source>
            <translation>Translation With Coordinates</translation>
        </message>
        <message>
            <source>GEOM_TRANSLATION_TITLE</source>
            <translation>Translation Of An Object</translation>
        </message>
        <message>
            <source>GEOM_TRANSPARENCY_OPAQUE</source>
            <translation>Opaque</translation>
        </message>
        <message>
            <source>GEOM_TRANSPARENCY_TITLE</source>
            <translation>Transparency</translation>
        </message>
        <message>
            <source>GEOM_TRANSPARENCY_TRANSPARENT</source>
            <translation>Transparent</translation>
        </message>
        <message>
            <source>GEOM_TRIHEDRON</source>
            <translation>Trihedron</translation>
        </message>
        <message>
            <source>GEOM_ToBezier</source>
            <translation>ToBezier</translation>
        </message>
        <message>
            <source>GEOM_VALUE</source>
            <translation>Value</translation>
        </message>
        <message>
            <source>GEOM_VECTOR</source>
            <translation>Vector</translation>
        </message>
        <message>
            <source>GEOM_VECTOR_LENGTH</source>
            <translation>Vector Length :</translation>
        </message>
        <message>
            <source>GEOM_VECTOR_TITLE</source>
            <translation>Vector Construction</translation>
        </message>
        <message>
            <source>GEOM_VECTOR_U</source>
            <translation>Vector U</translation>
        </message>
        <message>
            <source>GEOM_VECTOR_V</source>
            <translation>Vector V</translation>
        </message>
        <message>
            <source>GEOM_VERTEX</source>
            <translation>Vertex</translation>
        </message>
	<message>
            <source>GEOM_VERTEXES</source>
            <translation>Vertexes</translation>
        </message>
        <message>
            <source>GEOM_WATER_DENSITY</source>
            <translation>Water Density :</translation>
        </message>
        <message>
            <source>GEOM_WEIGHT</source>
            <translation>Weight :</translation>
        </message>
	<message>
            <source>GEOM_WIDTH</source>
            <translation>Width :</translation>
        </message>
        <message>
            <source>GEOM_WHATIS</source>
            <translation>Whatis</translation>
        </message>
        <message>
            <source>GEOM_WHATIS_OBJECT</source>
            <translation>Object And Its Topological Informations</translation>
        </message>
        <message>
            <source>GEOM_WHATIS_TITLE</source>
            <translation>Whatis Informations</translation>
        </message>
        <message>
            <source>GEOM_WIRE</source>
            <translation>Wire</translation>
        </message>
        <message>
            <source>GEOM_WIRES</source>
            <translation>Wire(s)</translation>
        </message>
        <message>
            <source>GEOM_WIRES_TO_REMOVE</source>
            <translation>Wires to remove</translation>
        </message>
        <message>
            <source>GEOM_WIREZ</source>
            <translation>Wires</translation>
        </message>
        <message>
            <source>GEOM_WIRE_CONNECT</source>
            <translation>Wire creation from wires/edges connected</translation>
        </message>
        <message>
            <source>GEOM_WIRE_TITLE</source>
            <translation>Create A Wire</translation>
        </message>
        <message>
            <source>GEOM_WPLANE</source>
            <translation>Working Plane</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_FACE</source>
            <translation>Plane, Planar Face or LCS</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_ORIGIN</source>
            <translation>Select a plane</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_OXY</source>
            <translation>OXY</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_OYZ</source>
            <translation>OYZ</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_OZX</source>
            <translation>OZX</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_TITLE</source>
            <translation>Working Plane Selection</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_VECTOR</source>
            <translation>Select 2 vectors</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_VX</source>
            <translation>Vector X</translation>
        </message>
        <message>
            <source>GEOM_WPLANE_VZ</source>
            <translation>Vector Z</translation>
        </message>
        <message>
            <source>GEOM_WRN_RADIUS_NULL</source>
            <translation>Radius is null</translation>
        </message>
        <message>
            <source>GEOM_WRN_WARNING</source>
            <translation>Warning</translation>
        </message>
        <message>
            <source>WRN_SHAPE_UNCLOSED</source>
            <translation>Unable to create solid from unclosed shape %1</translation>
        </message>
        <message>
            <source>GEOM_X</source>
            <translation>X :</translation>
        </message>
        <message>
            <source>GEOM_Y</source>
            <translation>Y :</translation>
        </message>
        <message>
            <source>GEOM_Z</source>
            <translation>Z :</translation>
        </message>
        <message>
            <source>GLUE_NEW_OBJ_NAME</source>
            <translation>Glue</translation>
        </message>
        <message>
            <source>MEN_ALL_SEL_ONLY</source>
            <translation>Select All</translation>
        </message>
        <message>
            <source>MEN_ARC</source>
            <translation>Arc</translation>
        </message>
        <message>
            <source>MEN_ARCHIMEDE</source>
            <translation>Archimede</translation>
        </message>
        <message>
            <source>MEN_BASIC</source>
            <translation>Basic</translation>
        </message>
        <message>
            <source>MEN_BASIC_PROPS</source>
            <translation>Basic Properties</translation>
        </message>
        <message>
            <source>MEN_BLOCKS</source>
            <translation>Blocks</translation>
        </message>
        <message>
            <source>MEN_BND_BOX</source>
            <translation>Bounding Box</translation>
        </message>
        <message>
            <source>MEN_BOOLEAN</source>
            <translation>Boolean</translation>
        </message>
        <message>
            <source>MEN_BOX</source>
            <translation>Box</translation>
        </message>
        <message>
            <source>MEN_BUILD</source>
            <translation>Build</translation>
        </message>
        <message>
            <source>MEN_CHAMFER</source>
            <translation>Chamfer</translation>
        </message>
        <message>
            <source>MEN_CHANGE_ORIENTATION</source>
            <translation>Change Orientation</translation>
        </message>
        <message>
            <source>MEN_CHECK</source>
            <translation>Check</translation>
        </message>
        <message>
            <source>MEN_CHECK_COMPOUND</source>
            <translation>Check Compound of Blocks</translation>
        </message>
        <message>
            <source>MEN_CHECK_FREE_BNDS</source>
            <translation>Check Free Boundaries</translation>
        </message>
        <message>
            <source>MEN_CHECK_FREE_FACES</source>
            <translation>Check Free Faces</translation>
        </message>
        <message>
            <source>MEN_CHECK_GEOMETRY</source>
            <translation>Check Geometry</translation>
        </message>
        <message>
            <source>MEN_CIRCLE</source>
            <translation>Circle</translation>
        </message>
        <message>
            <source>MEN_CLIPPING</source>
            <translation>Clipping Range</translation>
        </message>
        <message>
            <source>MEN_CLOSE_CONTOUR</source>
            <translation>Close Contour</translation>
        </message>
        <message>
            <source>MEN_COMMON</source>
            <translation>Common</translation>
        </message>
        <message>
            <source>MEN_COMPOUND</source>
            <translation>Compound</translation>
        </message>
        <message>
            <source>MEN_COMPOUND_SEL_ONLY</source>
            <translation>Compound</translation>
        </message>
        <message>
            <source>MEN_CONE</source>
            <translation>Cone</translation>
        </message>
        <message>
            <source>MEN_CURVE</source>
            <translation>Curve</translation>
        </message>
        <message>
            <source>MEN_CUT</source>
            <translation>Cut</translation>
        </message>
        <message>
            <source>MEN_CYLINDER</source>
            <translation>Cylinder</translation>
        </message>
        <message>
            <source>MEN_DELETE</source>
            <translation>Delete</translation>
        </message>
        <message>
            <source>MEN_DIMENSIONS</source>
            <translation>Dimensions</translation>
        </message>
        <message>
            <source>MEN_DISPLAY</source>
            <translation>Show</translation>
        </message>
	<message>
            <source>MEN_DISK</source>
            <translation>Disk</translation>
        </message>
        <message>
            <source>MEN_DISPLAY_ALL</source>
            <translation>Show All</translation>
        </message>
        <message>
            <source>MEN_DISPLAY_MODE</source>
            <translation>Display Mode</translation>
        </message>
        <message>
            <source>MEN_DISPLAY_ONLY</source>
            <translation>Show Only</translation>
        </message>
        <message>
            <source>MEN_EDGE</source>
            <translation>Edge</translation>
        </message>
        <message>
            <source>MEN_EDGE_SEL_ONLY</source>
            <translation>Edge</translation>
        </message>
        <message>
            <source>MEN_EDIT</source>
            <translation>Edit</translation>
        </message>
        <message>
            <source>MEN_ELLIPSE</source>
            <translation>Ellipse</translation>
        </message>
        <message>
            <source>MEN_ERASE</source>
            <translation>Hide</translation>
        </message>
        <message>
            <source>MEN_ERASE_ALL</source>
            <translation>Hide All</translation>
        </message>
        <message>
            <source>MEN_EXPLODE</source>
            <translation>Explode</translation>
        </message>
        <message>
            <source>MEN_EXPLODE_BLOCKS</source>
            <translation>Explode on Blocks</translation>
        </message>
        <message>
            <source>MEN_EXPORT</source>
            <translation>Export...</translation>
        </message>
        <message>
            <source>MEN_EXTRUSION</source>
            <translation>Extrusion</translation>
        </message>
        <message>
            <source>MEN_FACE</source>
            <translation>Face</translation>
        </message>
        <message>
            <source>MEN_FACE_SEL_ONLY</source>
            <translation>Face</translation>
        </message>
        <message>
            <source>MEN_FILE</source>
            <translation>File</translation>
        </message>
        <message>
            <source>MEN_FILLET</source>
            <translation>Fillet</translation>
        </message>
	<message>
            <source>MEN_FILLET_2D</source>
            <translation>Fillet 2D</translation>
        </message>
        <message>
            <source>MEN_FILLING</source>
            <translation>Filling</translation>
        </message>
        <message>
            <source>MEN_FUSE</source>
            <translation>Fuse</translation>
        </message>
        <message>
            <source>MEN_GENERATION</source>
            <translation>Generation</translation>
        </message>
        <message>
            <source>MEN_GLUE_FACES</source>
            <translation>Glue Faces</translation>
        </message>
        <message>
            <source>MEN_GROUP</source>
            <translation>Group</translation>
        </message>
        <message>
            <source>MEN_GROUP_CREATE</source>
            <translation>Create</translation>
        </message>
        <message>
            <source>MEN_GROUP_EDIT</source>
            <translation>Edit</translation>
        </message>
        <message>
            <source>MEN_RELOAD_IMPORTED</source>
            <translation>Reload From Disk</translation>
        </message>
        <message>
            <source>MEN_HEX_SOLID</source>
            <translation>Hexahedral Solid</translation>
        </message>
        <message>
            <source>MEN_IMPORT</source>
            <translation>Import...</translation>
        </message>
        <message>
            <source>MEN_INERTIA</source>
            <translation>Inertia</translation>
        </message>
        <message>
            <source>MEN_ISOS</source>
            <translation>Isos</translation>
        </message>
        <message>
            <source>MEN_LINE</source>
            <translation>Line</translation>
        </message>
        <message>
            <source>MEN_LOCAL_CS</source>
            <translation>Local Coordinate System</translation>
        </message>
        <message>
            <source>MEN_MASS_CENTER</source>
            <translation>Center of Mass</translation>
        </message>
        <message>
            <source>MEN_MEASURES</source>
            <translation>Measures</translation>
        </message>
        <message>
            <source>MEN_MIN_DIST</source>
            <translation>Min Distance</translation>
        </message>
        <message>
            <source>MEN_MIRROR</source>
            <translation>Mirror Image</translation>
        </message>
        <message>
            <source>MEN_MODIFY_LOCATION</source>
            <translation>Modify the Location</translation>
        </message>
        <message>
            <source>MEN_MUL_ROTATION</source>
            <translation>Multi-Rotation</translation>
        </message>
        <message>
            <source>MEN_MUL_TRANSFORM</source>
            <translation>Multi-Transformation</translation>
        </message>
        <message>
            <source>MEN_MUL_TRANSLATION</source>
            <translation>Multi-Translation</translation>
        </message>
        <message>
            <source>MEN_NEW_ENTITY</source>
            <translation>New Entity</translation>
        </message>
        <message>
            <source>MEN_OFFSET</source>
            <translation>Offset Surface</translation>
        </message>
        <message>
            <source>MEN_OPERATIONS</source>
            <translation>Operations</translation>
        </message>
        <message>
            <source>MEN_PARTITION</source>
            <translation>Partition</translation>
        </message>
        <message>
            <source>MEN_PIPE</source>
            <translation>Extrusion Along a Path</translation>
        </message>
        <message>
            <source>MEN_PLANE</source>
            <translation>Plane</translation>
        </message>
        <message>
            <source>MEN_POINT</source>
            <translation>Point</translation>
        </message>
        <message>
            <source>MEN_POINT_COORDS</source>
            <translation>Point Coordinates</translation>
        </message>
        <message>
            <source>MEN_POINT_ON_EDGE</source>
            <translation>Add Point on Edge</translation>
        </message>
        <message>
            <source>MEN_POP_COLOR</source>
            <translation>Color</translation>
        </message>
        <message>
            <source>MEN_POP_CREATE_GROUP</source>
            <translation>Create Group</translation>
        </message>
        <message>
            <source>MEN_POP_ISOS</source>
            <translation>Isos</translation>
        </message>
        <message>
            <source>MEN_POP_RENAME</source>
            <translation>Rename</translation>
        </message>
        <message>
            <source>MEN_POP_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>MEN_POP_TRANSPARENCY</source>
            <translation>Transparency</translation>
        </message>
        <message>
            <source>MEN_POP_WIREFRAME</source>
            <translation>Wireframe</translation>
        </message>
        <message>
            <source>MEN_PREFERENCES</source>
            <translation>Preferences</translation>
        </message>
        <message>
            <source>MEN_PREFERENCES_GEOM</source>
            <translation>Geometry</translation>
        </message>
        <message>
            <source>MEN_PRIMITIVES</source>
            <translation>Primitives</translation>
        </message>
        <message>
            <source>MEN_PROPAGATE</source>
            <translation>Propagate</translation>
        </message>
        <message>
            <source>MEN_Q_FACE</source>
            <translation>Quadrangle Face</translation>
        </message>
        <message>
            <source>MEN_REPAIR</source>
            <translation>Repair</translation>
        </message>
        <message>
            <source>MEN_REVOLUTION</source>
            <translation>Revolution</translation>
        </message>
        <message>
            <source>MEN_ROTATION</source>
            <translation>Rotation</translation>
        </message>
        <message>
            <source>MEN_SCALE</source>
            <translation>Scale Transform</translation>
        </message>
        <message>
            <source>MEN_SECTION</source>
            <translation>Section</translation>
        </message>
        <message>
            <source>MEN_SELECT_ONLY</source>
            <translation>Select Only</translation>
        </message>
        <message>
            <source>MEN_SEWING</source>
            <translation>Sewing</translation>
        </message>
        <message>
            <source>MEN_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>MEN_SHADING_COLOR</source>
            <translation>Shading Color</translation>
        </message>
        <message>
            <source>MEN_SHAPE_PROCESS</source>
            <translation>Shape Processing</translation>
        </message>
        <message>
            <source>MEN_SHELL</source>
            <translation>Shell</translation>
        </message>
        <message>
            <source>MEN_SHELL_SEL_ONLY</source>
            <translation>Shell</translation>
        </message>
        <message>
            <source>MEN_SKETCH</source>
            <translation>Sketch</translation>
        </message>
	<message>
            <source>MEN_3DSKETCH</source>
            <translation>3D Sketch</translation>
        </message>
        <message>
            <source>MEN_SOLID</source>
            <translation>Solid</translation>
        </message>
        <message>
            <source>MEN_SOLID_SEL_ONLY</source>
            <translation>Solid</translation>
        </message>
        <message>
            <source>MEN_SPHERE</source>
            <translation>Sphere</translation>
        </message>
        <message>
            <source>MEN_STEP_VALUE</source>
            <translation>Step Value</translation>
        </message>
        <message>
            <source>MEN_SUPPERSS_HOLES</source>
            <translation>Suppress Holes</translation>
        </message>
        <message>
            <source>MEN_SUPPRESS_FACES</source>
            <translation>Suppress Faces</translation>
        </message>
        <message>
            <source>MEN_SUPPRESS_INT_WIRES</source>
            <translation>Suppress Internal Wires</translation>
        </message>
        <message>
            <source>MEN_TOLERANCE</source>
            <translation>Compute Tolerance</translation>
        </message>
        <message>
            <source>MEN_TOOLS</source>
            <translation>Tools</translation>
        </message>
        <message>
            <source>MEN_TORUS</source>
            <translation>Torus</translation>
        </message>
        <message>
            <source>MEN_TRANSFORMATION</source>
            <translation>Transformation</translation>
        </message>
        <message>
            <source>MEN_TRANSLATION</source>
            <translation>Translation</translation>
        </message>
        <message>
            <source>MEN_VECTOR</source>
            <translation>Vector</translation>
        </message>
        <message>
            <source>MEN_VERTEX_SEL_ONLY</source>
            <translation>Vertex</translation>
        </message>
        <message>
            <source>MEN_VIEW</source>
            <translation>View</translation>
        </message>
        <message>
            <source>MEN_WHAT_IS</source>
            <translation>What is</translation>
        </message>
        <message>
            <source>MEN_WIRE</source>
            <translation>Wire</translation>
        </message>
        <message>
            <source>MEN_WIREFRAME</source>
            <translation>Wireframe</translation>
        </message>
        <message>
            <source>MEN_WIRE_SEL_ONLY</source>
            <translation>Wire</translation>
        </message>
        <message>
            <source>MEN_WORK_PLANE</source>
            <translation>Working Plane</translation>
        </message>
        <message>
            <source>NAME_LBL</source>
            <translation>Name: </translation>
        </message>
        <message>
            <source>NON_GEOM_OBJECTS_SELECTED</source>
            <translation>There are objects selected which do not belong to %1 component.</translation>
        </message>
        <message>
            <source>PREF_DISPLAY_MODE</source>
            <translation>Default display mode</translation>
        </message>
        <message>
            <source>PREF_FREE_BOUND_COLOR</source>
            <translation>Color of free boundaries</translation>
        </message>
        <message>
            <source>PREF_GROUP_GENERAL</source>
            <translation>General</translation>
        </message>
        <message>
            <source>PREF_GROUP_OCCVIEWER</source>
            <translation>OCC Viewer 3d</translation>
        </message>
        <message>
            <source>PREF_GROUP_VERTEX</source>
            <translation>Marker of Points</translation>
        </message>
        <message>
            <source>PREF_ISOS_COLOR</source>
            <translation>Color of isolines</translation>
        </message>
        <message>
            <source>PREF_LINE_COLOR</source>
            <translation>Color of edges, vectors, wires</translation>
        </message>
        <message>
            <source>PREF_MARKER_SCALE</source>
            <translation>Size</translation>
        </message>
        <message>
            <source>PREF_POINT_COLOR</source>
            <translation>Color of points</translation>
        </message>
        <message>
            <source>PREF_SHADING_COLOR</source>
            <translation>Default shading color</translation>
        </message>
        <message>
            <source>PREF_STEP_VALUE</source>
            <translation>Step value for spin boxes</translation>
        </message>
        <message>
            <source>PREF_TAB_SETTINGS</source>
            <translation>Settings</translation>
        </message>
        <message>
            <source>PREF_TYPE_OF_MARKER</source>
            <translation>Type</translation>
        </message>
        <message>
            <source>PREF_WIREFRAME_COLOR</source>
            <translation>Default wireframe color</translation>
        </message>
        <message>
            <source>PROCESS_SHAPE_NEW_OBJ_NAME</source>
            <translation>ProcessShape</translation>
        </message>
        <message>
            <source>REMOVE_HOLES_NEW_OBJ_NAME</source>
            <translation>SupressHoles</translation>
        </message>
        <message>
            <source>REMOVE_INT_WIRES_NEW_OBJ_NAME</source>
            <translation>RemoveIntWires</translation>
        </message>
        <message>
            <source>SEWING_NEW_OBJ_NAME</source>
            <translation>Sewing</translation>
        </message>
        <message>
            <source>STB_ALL_SEL_ONLY</source>
            <translation>Select all Objects</translation>
        </message>
        <message>
            <source>STB_ARC</source>
            <translation>Create an arc</translation>
        </message>
        <message>
            <source>STB_ARCHIMEDE</source>
            <translation>Archimede</translation>
        </message>
        <message>
            <source>STB_BASIC_PROPS</source>
            <translation>Basic properties</translation>
        </message>
        <message>
            <source>STB_BND_BOX</source>
            <translation>Compute bounding box</translation>
        </message>
        <message>
            <source>STB_BOX</source>
            <translation>Create a box</translation>
        </message>
        <message>
            <source>STB_CHAMFER</source>
            <translation>Chamfer</translation>
        </message>
        <message>
            <source>STB_CHANGE_ORIENTATION</source>
            <translation>Change orientation</translation>
        </message>
        <message>
            <source>STB_CHECK</source>
            <translation>Check</translation>
        </message>
        <message>
            <source>STB_CHECK_COMPOUND</source>
            <translation>Check compound of blocks</translation>
        </message>
        <message>
            <source>STB_CHECK_FREE_BNDS</source>
            <translation>Check free boundaries</translation>
        </message>
        <message>
            <source>STB_CHECK_FREE_FACES</source>
            <translation>Check free faces</translation>
        </message>
        <message>
            <source>STB_CHECK_GEOMETRY</source>
            <translation>Check Geometry</translation>
        </message>
        <message>
            <source>STB_CIRCLE</source>
            <translation>Create a circle</translation>
        </message>
        <message>
            <source>STB_CLIPPING</source>
            <translation>Clipping range</translation>
        </message>
        <message>
            <source>STB_CLOSE_CONTOUR</source>
            <translation>Perform close contour</translation>
        </message>
        <message>
            <source>STB_COMMON</source>
            <translation>Common</translation>
        </message>
        <message>
            <source>STB_COMPOUND</source>
            <translation>Build a compound</translation>
        </message>
        <message>
            <source>STB_COMPOUND_SEL_ONLY</source>
            <translation>Select only a Compounds</translation>
        </message>
        <message>
            <source>STB_CONE</source>
            <translation>Create a cone</translation>
        </message>
        <message>
            <source>STB_CURVE</source>
            <translation>Create a curve</translation>
        </message>
        <message>
            <source>STB_CUT</source>
            <translation>Cut</translation>
        </message>
        <message>
            <source>STB_CYLINDER</source>
            <translation>Create a cylinder</translation>
        </message>
        <message>
            <source>STB_DELETE</source>
            <translation>Delete object</translation>
        </message>
	<message>
            <source>STB_DISK</source>
            <translation>Create a disk</translation>
        </message>
        <message>
            <source>STB_DISPLAY</source>
            <translation>Show object(s)</translation>
        </message>
        <message>
            <source>STB_DISPLAY_ALL</source>
            <translation>Show all</translation>
        </message>
        <message>
            <source>STB_DISPLAY_ONLY</source>
            <translation>Show only</translation>
        </message>
        <message>
            <source>STB_EDGE</source>
            <translation>Build an edge</translation>
        </message>
        <message>
            <source>STB_EDGE_SEL_ONLY</source>
            <translation>Select only a Edges</translation>
        </message>
        <message>
            <source>STB_ELLIPSE</source>
            <translation>Create an ellipse</translation>
        </message>
        <message>
            <source>STB_ERASE</source>
            <translation>Hide object(s)</translation>
        </message>
        <message>
            <source>STB_ERASE_ALL</source>
            <translation>Hide all</translation>
        </message>
        <message>
            <source>STB_EXPLODE</source>
            <translation>Explode</translation>
        </message>
        <message>
            <source>STB_EXPLODE_BLOCKS</source>
            <translation>Explode on Blocks</translation>
        </message>
        <message>
            <source>STB_EXPORT</source>
            <translation>Export geometry to BREP file</translation>
        </message>
        <message>
            <source>STB_EXTRUSION</source>
            <translation>Create an extrusion</translation>
        </message>
        <message>
            <source>STB_FACE</source>
            <translation>Build a face</translation>
        </message>
        <message>
            <source>STB_FACE_SEL_ONLY</source>
            <translation>Select only a Faces</translation>
        </message>
        <message>
            <source>STB_FILLET</source>
            <translation>Fillet</translation>
        </message>
        <message>
            <source>STB_FILLING</source>
            <translation>Create a filling</translation>
        </message>
        <message>
            <source>STB_FUSE</source>
            <translation>Fuse</translation>
        </message>
        <message>
            <source>STB_GLUE_FACES</source>
            <translation>Perform glue faces</translation>
        </message>
        <message>
            <source>STB_GROUP_CREATE</source>
            <translation>Create a group</translation>
        </message>
        <message>
            <source>STB_GROUP_EDIT</source>
            <translation>Edit a group</translation>
        </message>
        <message>
            <source>STB_RELOAD_IMPORTED</source>
            <translation>Reload imported shape from its original place on disk</translation>
        </message>
        <message>
            <source>STB_HEX_SOLID</source>
            <translation>Hexahedral Solid</translation>
        </message>
        <message>
            <source>STB_IMPORT</source>
            <translation>Import geometry from BREP file</translation>
        </message>
        <message>
            <source>STB_INERTIA</source>
            <translation>Compute intertia</translation>
        </message>
        <message>
            <source>STB_ISOS</source>
            <translation>Set number of isolines</translation>
        </message>
        <message>
            <source>STB_LINE</source>
            <translation>Create a line</translation>
        </message>
        <message>
            <source>STB_LOCAL_CS</source>
            <translation>Create a local coordinate system</translation>
        </message>
        <message>
            <source>STB_MASS_CENTER</source>
            <translation>Compute center of mass</translation>
        </message>
        <message>
            <source>STB_MIN_DIST</source>
            <translation>Compute minimum distance</translation>
        </message>
        <message>
            <source>STB_MIRROR</source>
            <translation>Mirror image</translation>
        </message>
        <message>
            <source>STB_MODIFY_LOCATION</source>
            <translation>Modify the Location</translation>
        </message>
        <message>
            <source>STB_MUL_ROTATION</source>
            <translation>Multi-Rotation</translation>
        </message>
        <message>
            <source>STB_MUL_TRANSFORM</source>
            <translation>Multi-transformation</translation>
        </message>
        <message>
            <source>STB_MUL_TRANSLATION</source>
            <translation>Multi-Translation</translation>
        </message>
        <message>
            <source>STB_OFFSET</source>
            <translation>Offset surface</translation>
        </message>
        <message>
            <source>STB_PARTITION</source>
            <translation>Partition</translation>
        </message>
        <message>
            <source>STB_PIPE</source>
            <translation>Create a shape by Extrusion along a path</translation>
        </message>
        <message>
            <source>STB_PLANE</source>
            <translation>Create a plane</translation>
        </message>
        <message>
            <source>STB_POINT</source>
            <translation>Create a point</translation>
        </message>
        <message>
            <source>STB_POINT_COORDS</source>
            <translation>Point coordinates</translation>
        </message>
        <message>
            <source>STB_POINT_ON_EDGE</source>
            <translation>Add point on edge</translation>
        </message>
        <message>
            <source>STB_POP_COLOR</source>
            <translation>Color</translation>
        </message>
        <message>
            <source>STB_POP_CREATE_GROUP</source>
            <translation>Create Group</translation>
        </message>
        <message>
            <source>STB_POP_ISOS</source>
            <translation>Isolines</translation>
        </message>
        <message>
            <source>STB_POP_RENAME</source>
            <translation>Rename</translation>
        </message>
        <message>
            <source>STB_POP_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>STB_POP_TRANSPARENCY</source>
            <translation>Transparency</translation>
        </message>
        <message>
            <source>STB_POP_WIREFRAME</source>
            <translation>Wireframe</translation>
        </message>
        <message>
            <source>STB_PROPAGATE</source>
            <translation>Propagate</translation>
        </message>
        <message>
            <source>STB_Q_FACE</source>
            <translation>Quadrangle Face</translation>
        </message>
        <message>
            <source>STB_REVOLUTION</source>
            <translation>Create a revolution</translation>
        </message>
        <message>
            <source>STB_ROTATION</source>
            <translation>Rotation</translation>
        </message>
        <message>
            <source>STB_SCALE</source>
            <translation>Scale transform</translation>
        </message>
        <message>
            <source>STB_SECTION</source>
            <translation>Section</translation>
        </message>
        <message>
            <source>STB_SEWING</source>
            <translation>Perform sewing</translation>
        </message>
        <message>
            <source>STB_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>STB_SHADING_COLOR</source>
            <translation>Set shading color</translation>
        </message>
        <message>
            <source>STB_SHAPE_PROCESS</source>
            <translation>Perform shape processing </translation>
        </message>
        <message>
            <source>STB_SHELL</source>
            <translation>Build a shell</translation>
        </message>
        <message>
            <source>STB_SHELL_SEL_ONLY</source>
            <translation>Select only a Shells</translation>
        </message>
        <message>
            <source>STB_SKETCH</source>
            <translation>Sketch</translation>
        </message>
        <message>
            <source>STB_SOLID</source>
            <translation>Build a solid</translation>
        </message>
        <message>
            <source>STB_SOLID_SEL_ONLY</source>
            <translation>Select only a Solids</translation>
        </message>
        <message>
            <source>STB_SPHERE</source>
            <translation>Create a sphere</translation>
        </message>
        <message>
            <source>STB_STEP_VALUE</source>
            <translation>Set step value</translation>
        </message>
        <message>
            <source>STB_SUPPERSS_HOLES</source>
            <translation>Perform suppress holes</translation>
        </message>
        <message>
            <source>STB_SUPPRESS_FACES</source>
            <translation>Perform suppress faces</translation>
        </message>
        <message>
            <source>STB_SUPPRESS_INT_WIRES</source>
            <translation>Perform suppress internal wires</translation>
        </message>
        <message>
            <source>STB_TOLERANCE</source>
            <translation>Compute tolerance</translation>
        </message>
        <message>
            <source>STB_TORUS</source>
            <translation>Create a torus</translation>
        </message>
        <message>
            <source>STB_TRANSLATION</source>
            <translation>Translation</translation>
        </message>
        <message>
            <source>STB_VECTOR</source>
            <translation>Create a vector</translation>
        </message>
        <message>
            <source>STB_VERTEX_SEL_ONLY</source>
            <translation>Select only a Points</translation>
        </message>
        <message>
            <source>STB_WHAT_IS</source>
            <translation>What is</translation>
        </message>
        <message>
            <source>STB_WIRE</source>
            <translation>Build a wire</translation>
        </message>
        <message>
            <source>STB_WIRE_SEL_ONLY</source>
            <translation>Select only a Wires</translation>
        </message>
        <message>
            <source>STB_WORK_PLANE</source>
            <translation>Create a working plane</translation>
        </message>
        <message>
            <source>SUPPRESS_RESULT</source>
            <translation>Suppress Result</translation>
        </message>
        <message>
            <source>SUPRESS_FACE_NEW_OBJ_NAME</source>
            <translation>SupressFaces</translation>
        </message>
        <message>
            <source>ShHealOper_ErrorExecution_msg</source>
            <translation>Shape Healing algorithm failed</translation>
        </message>
        <message>
            <source>ShHealOper_InvalidParameters_msg</source>
            <translation>Incorrect parameters for Shape Healing algorithm</translation>
        </message>
        <message>
            <source>ShHealOper_NotError_msg</source>
            <translation>Shape Healing algorithm has done no modification of the original shape</translation>
        </message>
        <message>
            <source>TLT_RENAME</source>
            <translation>Rename</translation>
        </message>
        <message>
            <source>TOM_O</source>
            <translation>O</translation>
        </message>
        <message>
            <source>TOM_O_PLUS</source>
            <translation>+ in O</translation>
        </message>
        <message>
            <source>TOM_O_POINT</source>
            <translation>. in O</translation>
        </message>
        <message>
            <source>TOM_O_STAR</source>
            <translation>* in O</translation>
        </message>
        <message>
            <source>TOM_O_X</source>
            <translation>X in O</translation>
        </message>
        <message>
            <source>TOM_PLUS</source>
            <translation>+</translation>
        </message>
        <message>
            <source>TOM_POINT</source>
            <translation>.</translation>
        </message>
        <message>
            <source>TOM_STAR</source>
            <translation>*</translation>
        </message>
        <message>
            <source>TOM_X</source>
            <translation>X</translation>
        </message>
        <message>
            <source>TOOL_BASIC</source>
            <translation>Basic</translation>
        </message>
        <message>
            <source>TOOL_BOOLEAN</source>
            <translation>Boolean operations</translation>
        </message>
        <message>
            <source>TOOL_GENERATION</source>
            <translation>Generation</translation>
        </message>
        <message>
            <source>TOOL_PRIMITIVES</source>
            <translation>Primitives</translation>
        </message>
        <message>
            <source>TOOL_TRANSFORMATION</source>
            <translation>Transformation</translation>
        </message>
        <message>
            <source>TOP_ARC</source>
            <translation>Create an arc</translation>
        </message>
        <message>
            <source>TOP_ARCHIMEDE</source>
            <translation>Archimede</translation>
        </message>
        <message>
            <source>TOP_BASIC_PROPS</source>
            <translation>Basic properties</translation>
        </message>
        <message>
            <source>TOP_BND_BOX</source>
            <translation>Compute bounding box</translation>
        </message>
        <message>
            <source>TOP_BOX</source>
            <translation>Create a box</translation>
        </message>
        <message>
            <source>TOP_CHAMFER</source>
            <translation>Chamfer</translation>
        </message>
        <message>
            <source>TOP_CHANGE_ORIENTATION</source>
            <translation>Change orientation</translation>
        </message>
        <message>
            <source>TOP_CHECK</source>
            <translation>Check</translation>
        </message>
        <message>
            <source>TOP_CHECK_COMPOUND</source>
            <translation>Check compound of blocks</translation>
        </message>
        <message>
            <source>TOP_CHECK_FREE_BNDS</source>
            <translation>Check free boundaries</translation>
        </message>
        <message>
            <source>TOP_CHECK_FREE_FACES</source>
            <translation>Check free faces</translation>
        </message>
        <message>
            <source>TOP_CHECK_GEOMETRY</source>
            <translation>Check Geometry</translation>
        </message>
        <message>
            <source>TOP_CIRCLE</source>
            <translation>Create a circle</translation>
        </message>
        <message>
            <source>TOP_CLIPPING</source>
            <translation>Clipping range</translation>
        </message>
        <message>
            <source>TOP_CLOSE_CONTOUR</source>
            <translation>Perform close contour</translation>
        </message>
        <message>
            <source>TOP_COMMON</source>
            <translation>Common</translation>
        </message>
        <message>
            <source>TOP_COMPOUND</source>
            <translation>Build a compound</translation>
        </message>
        <message>
            <source>TOP_CONE</source>
            <translation>Create a cone</translation>
        </message>
        <message>
            <source>TOP_CURVE</source>
            <translation>Create a curve</translation>
        </message>
        <message>
            <source>TOP_CUT</source>
            <translation>Cut</translation>
        </message>
        <message>
            <source>TOP_CYLINDER</source>
            <translation>Create a cylinder</translation>
        </message>
        <message>
            <source>TOP_DELETE</source>
            <translation>Delete object</translation>
        </message>
	<message>
            <source>TOP_DISK</source>
            <translation>Build a Disk</translation>
        </message>
        <message>
            <source>TOP_DISPLAY</source>
            <translation>Show</translation>
        </message>
        <message>
            <source>TOP_DISPLAY_ALL</source>
            <translation>Show all</translation>
        </message>
        <message>
            <source>TOP_DISPLAY_ONLY</source>
            <translation>Show only</translation>
        </message>
        <message>
            <source>TOP_EDGE</source>
            <translation>Build an edge</translation>
        </message>
        <message>
            <source>TOP_ELLIPSE</source>
            <translation>Create an ellipse</translation>
        </message>
        <message>
            <source>TOP_ERASE</source>
            <translation>Hide</translation>
        </message>
        <message>
            <source>TOP_ERASE_ALL</source>
            <translation>Hide all</translation>
        </message>
        <message>
            <source>TOP_EXPLODE</source>
            <translation>Explode</translation>
        </message>
        <message>
            <source>TOP_EXPLODE_BLOCKS</source>
            <translation>Explode on Blocks</translation>
        </message>
        <message>
            <source>TOP_EXPORT</source>
            <translation>Export geometry to BREP file</translation>
        </message>
        <message>
            <source>TOP_EXTRUSION</source>
            <translation>Create an extrusion</translation>
        </message>
        <message>
            <source>TOP_FACE</source>
            <translation>Build a face</translation>
        </message>
        <message>
            <source>TOP_FILLET</source>
            <translation>Fillet</translation>
        </message>
        <message>
            <source>TOP_FILLING</source>
            <translation>Create a filling</translation>
        </message>
        <message>
            <source>TOP_FUSE</source>
            <translation>Fuse</translation>
        </message>
        <message>
            <source>TOP_GLUE_FACES</source>
            <translation>Perform glue faces</translation>
        </message>
        <message>
            <source>TOP_GROUP_CREATE</source>
            <translation>Create a group</translation>
        </message>
        <message>
            <source>TOP_GROUP_EDIT</source>
            <translation>Edit a group</translation>
        </message>
        <message>
            <source>TOP_HEX_SOLID</source>
            <translation>Hexahedral Solid</translation>
        </message>
        <message>
            <source>TOP_IMPORT</source>
            <translation>Import geometry from BREP file</translation>
        </message>
        <message>
            <source>TOP_INERTIA</source>
            <translation>Compute intertia</translation>
        </message>
        <message>
            <source>TOP_ISOS</source>
            <translation>Set number of isolines</translation>
        </message>
        <message>
            <source>TOP_LINE</source>
            <translation>Create a line</translation>
        </message>
        <message>
            <source>TOP_LOCAL_CS</source>
            <translation>Create a local coordinate system</translation>
        </message>
        <message>
            <source>TOP_MASS_CENTER</source>
            <translation>Compute center of mass</translation>
        </message>
        <message>
            <source>TOP_MIN_DIST</source>
            <translation>Compute minimum distance</translation>
        </message>
        <message>
            <source>TOP_MIRROR</source>
            <translation>Mirror image</translation>
        </message>
        <message>
            <source>TOP_MODIFY_LOCATION</source>
            <translation>Modify the Location</translation>
        </message>
        <message>
            <source>TOP_MUL_ROTATION</source>
            <translation>Multi-Rotation</translation>
        </message>
        <message>
            <source>TOP_MUL_TRANSFORM</source>
            <translation>Multi-transformation</translation>
        </message>
        <message>
            <source>TOP_MUL_TRANSLATION</source>
            <translation>Multi-Translation</translation>
        </message>
        <message>
            <source>TOP_OFFSET</source>
            <translation>Offset surface</translation>
        </message>
        <message>
            <source>TOP_PARTITION</source>
            <translation>Partition</translation>
        </message>
        <message>
            <source>TOP_PIPE</source>
            <translation>Extrusion along a path</translation>
        </message>
        <message>
            <source>TOP_PLANE</source>
            <translation>Create a plane</translation>
        </message>
        <message>
            <source>TOP_POINT</source>
            <translation>Create a point</translation>
        </message>
        <message>
            <source>TOP_POINT_COORDS</source>
            <translation>Point coordinates</translation>
        </message>
        <message>
            <source>TOP_POINT_ON_EDGE</source>
            <translation>Add point on edge</translation>
        </message>
        <message>
            <source>TOP_POP_COLOR</source>
            <translation>Color</translation>
        </message>
        <message>
            <source>TOP_POP_CREATE_GROUP</source>
            <translation>Create Group</translation>
        </message>
        <message>
            <source>TOP_POP_ISOS</source>
            <translation>Isolines</translation>
        </message>
        <message>
            <source>TOP_POP_RENAME</source>
            <translation>Rename</translation>
        </message>
        <message>
            <source>TOP_POP_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>TOP_POP_TRANSPARENCY</source>
            <translation>Transparency</translation>
        </message>
        <message>
            <source>TOP_POP_WIREFRAME</source>
            <translation>Wireframe</translation>
        </message>
        <message>
            <source>TOP_PROPAGATE</source>
            <translation>Propagate</translation>
        </message>
        <message>
            <source>TOP_Q_FACE</source>
            <translation>Quadrangle Face</translation>
        </message>
        <message>
            <source>TOP_REVOLUTION</source>
            <translation>Create a revolution</translation>
        </message>
        <message>
            <source>TOP_ROTATION</source>
            <translation>Rotation</translation>
        </message>
        <message>
            <source>TOP_SCALE</source>
            <translation>Scale transform</translation>
        </message>
        <message>
            <source>TOP_SECTION</source>
            <translation>Section</translation>
        </message>
        <message>
            <source>TOP_SEWING</source>
            <translation>Perform sewing</translation>
        </message>
        <message>
            <source>TOP_SHADING</source>
            <translation>Shading</translation>
        </message>
        <message>
            <source>TOP_SHADING_COLOR</source>
            <translation>Set shading color</translation>
        </message>
        <message>
            <source>TOP_SHAPE_PROCESS</source>
            <translation>Perform shape processing</translation>
        </message>
        <message>
            <source>TOP_SHELL</source>
            <translation>Build a shell</translation>
        </message>
        <message>
            <source>TOP_SKETCH</source>
            <translation>Sketch</translation>
        </message>
        <message>
            <source>TOP_SOLID</source>
            <translation>Build a solid</translation>
        </message>
        <message>
            <source>TOP_SPHERE</source>
            <translation>Create a sphere</translation>
        </message>
        <message>
            <source>TOP_STEP_VALUE</source>
            <translation>Set step value</translation>
        </message>
        <message>
            <source>TOP_SUPPERSS_HOLES</source>
            <translation>Perform suppress holes</translation>
        </message>
        <message>
            <source>TOP_SUPPRESS_FACES</source>
            <translation>Perform suppress faces</translation>
        </message>
        <message>
            <source>TOP_SUPPRESS_INT_WIRES</source>
            <translation>Perform suppress internal wires</translation>
        </message>
        <message>
            <source>TOP_TOLERANCE</source>
            <translation>Compute tolerance</translation>
        </message>
        <message>
            <source>TOP_TORUS</source>
            <translation>Create a torus</translation>
        </message>
        <message>
            <source>TOP_TRANSLATION</source>
            <translation>Translation</translation>
        </message>
        <message>
            <source>TOP_VECTOR</source>
            <translation>Create a vector</translation>
        </message>
        <message>
            <source>TOP_WHAT_IS</source>
            <translation>What is</translation>
        </message>
        <message>
            <source>TOP_WIRE</source>
            <translation>Build a wire</translation>
        </message>
        <message>
            <source>TOP_WORK_PLANE</source>
            <translation>Create a working plane</translation>
        </message>
        <message>
            <source>WRN_NOT_IMPLEMENTED</source>
            <translation>Sorry, this functionality is not yet implemented</translation>
        </message>
        <message>
            <source>_S_</source>
            <translation>(s)</translation>
        </message>
        <message>
            <source>NOT_FOUND_ANY</source>
            <translation>Not a single entity has been found</translation>
        </message>
        <message>
            <source>GEOM_FACE_I</source>
            <translation>Face %1</translation>
        </message>
        <message>
            <source>GEOM_CONSTANT_RADIUS</source>
            <translation>Radius :</translation>
        </message>
        <message>
            <source>GEOM_R1</source>
            <translation>R1 :</translation>
        </message>
        <message>
            <source>GEOM_R2</source>
            <translation>R2 :</translation>
        </message>
        <message>
            <source>GEOM_BOTHWAY</source>
            <translation>Both Directions</translation>
        </message>
        <message>
            <source>GEOM_NORMALE</source>
            <translation>Normal To A Face</translation>
        </message>
        <message>
            <source>GEOM_VECTOR_NORMALE</source>
            <translation>Vector_Normal</translation>
        </message>
        <message>
            <source>GEOM_LINE1</source>
            <translation>Line 1</translation>
        </message>
        <message>
            <source>GEOM_LINE2</source>
            <translation>Line 2</translation>
        </message>
        <message>
            <source>GEOM_D</source>
            <translation>D :</translation>
        </message>
        <message>
            <source>GEOM_CHAMFER_EDGE</source>
            <translation>Chamfer On Selected Edges</translation>
        </message>
        <message>
            <source>SELECTED_EDGE</source>
            <translation>Selected Edges</translation>
        </message>
        <message>
            <source>GEOM_NORMALE_TITLE</source>
            <translation>Create Normal To A Face</translation>
        </message>
        <message>
            <source>GEOM_MEASURE_ANGLE_TITLE</source>
            <translation>Angle Between Two Straight Edges/Lines/Vectors</translation>
        </message>
        <message>
            <source>GEOM_MEASURE_ANGLE_ANGLE</source>
            <translation>Angle</translation>
        </message>
        <message>
            <source>GEOM_MEASURE_ANGLE_OBJ</source>
            <translation>Objects And Results</translation>
        </message>
        <message>
            <source>GEOM_MEASURE_ANGLE_IS</source>
            <translation>Angle in degrees :</translation>
        </message>
        <message>
            <source>GEOM_LINE_INTERSECTION</source>
            <translation>Point On Lines Intersection</translation>
        </message>
        <message>
            <source>GEOM_KEEP_NONLIMIT_SHAPES</source>
            <translation>Keep shapes of lower type</translation>
        </message>
        <message>
            <source>GEOM_CENTER_2POINTS</source>
            <translation>Center and two points</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_EXTRA_EDGES_TITLE</source>
            <translation>Remove extra edges</translation>
        </message>
        <message>
            <source>GEOM_REMOVE_EXTRA_EDGES</source>
            <translation>Object to remove extra edges</translation>
        </message>
        <message>
            <source>REMOVE_EXTRA_EDGES_NEW_OBJ_NAME</source>
            <translation>NoExtraEdges</translation>
        </message>
        <message>
            <source>TOP_REMOVE_EXTRA_EDGES</source>
            <translation>Remove extra edges</translation>
        </message>
        <message>
            <source>MEN_REMOVE_EXTRA_EDGES</source>
            <translation>Remove Extra Edges</translation>
        </message>
        <message>
            <source>STB_REMOVE_EXTRA_EDGES</source>
            <translation>Remove extra edges</translation>
        </message>
        <message>
            <source>TOP_NORMALE</source>
            <translation>Compute normal to a face</translation>
        </message>
        <message>
            <source>MEN_NORMALE</source>
            <translation>Normal to a Face</translation>
        </message>
        <message>
            <source>STB_NORMALE</source>
            <translation>Compute normal to a face in a point (optional)</translation>
        </message>
        <message>
            <source>TOP_MEASURE_ANGLE</source>
            <translation>Compute angle</translation>
        </message>
        <message>
            <source>MEN_MEASURE_ANGLE</source>
            <translation>Angle</translation>
        </message>
        <message>
            <source>STB_MEASURE_ANGLE</source>
            <translation>Compute angle between two lines or linear edges</translation>
        </message>
        <message>
            <source>TOP_POP_AUTO_COLOR</source>
            <translation>Auto color</translation>
        </message>
        <message>
            <source>MEN_POP_AUTO_COLOR</source>
            <translation>Auto Color</translation>
        </message>
        <message>
            <source>STB_POP_AUTO_COLOR</source>
            <translation>Auto color</translation>
        </message>
        <message>
            <source>TOP_POP_DISABLE_AUTO_COLOR</source>
            <translation>Disable auto color</translation>
        </message>
        <message>
            <source>MEN_POP_DISABLE_AUTO_COLOR</source>
            <translation>Disable Auto Color</translation>
        </message>
        <message>
            <source>STB_POP_DISABLE_AUTO_COLOR</source>
            <translation>Disable auto color</translation>
        </message>
        <message>
            <source>GEOM_RESULT_NAME_GRP</source>
            <translation>Result name</translation>
        </message>
        <message>
            <source>GEOM_RESULT_NAME_LBL</source>
            <translation>Name</translation>
        </message>
        <message>
            <source>GEOM_FILLING_APPROX</source>
            <translation>Approximation</translation>
        </message>
        <message>
            <source>GEOM_WRN_NO_APPROPRIATE_SELECTION</source>
            <translation>No appropriate objects selected</translation>
        </message>
        <message>
            <source>GEOM_SHAPES_ON_SHAPE</source>
            <translation>Get shapes on shape</translation>
        </message>
        <message>
            <source>GEOM_SHAPES_ON_SHAPE_ESHAPE</source>
            <translation>Shape for exploding</translation>
        </message>
        <message>
            <source>GEOM_SHAPES_ON_SHAPE_CSHAPE</source>
            <translation>Shape for checking</translation>
        </message>
        <message>
            <source>GEOM_SHAPES_ON_SHAPE_STATE</source>
            <translation>State</translation>
        </message>
        <message>
            <source>GEOM_KIND_OF_SHAPE</source>
            <translation>Kind of Shape :</translation>
        </message>
        <message>
            <source>GEOM_CLOSED</source>
            <translation>Closed</translation>
        </message>
        <message>
            <source>GEOM_UNCLOSED</source>
            <translation>Opened</translation>
        </message>
        <message>
            <source>GEOM_CLOSEDUNCLOSED</source>
            <translation>Not defined, Closed or Opened. Possibly, error occured.</translation>
        </message>
        <message>
            <source>GEOM_DISK_CIRCLE</source>
            <translation>Disk</translation>
        </message>
        <message>
            <source>GEOM_DISK_ELLIPSE</source>
            <translation>Elliptical face</translation>
        </message>
        <message>
            <source>GEOM_PLANAR_FACE</source>
            <translation>Planar Face</translation>
        </message>
        <message>
            <source>GEOM_POLYGON</source>
            <translation>Polygon</translation>
        </message>
        <message>
            <source>GEOM_NORMAL</source>
            <translation>Normal direction</translation>
        </message>
        <message>
            <source>GEOM_DIRECTION</source>
            <translation>Direction</translation>
        </message>
        <message>
            <source>GEOM_UPARAMETER</source>
            <translation>U-parameter :</translation>
        </message>
        <message>
            <source>GEOM_VPARAMETER</source>
            <translation>V-parameter :</translation>
        </message>
        <message>
            <source>GEOM_X_I</source>
            <translation>X%1 :</translation>
        </message>
        <message>
            <source>GEOM_Y_I</source>
            <translation>Y%1 :</translation>
        </message>
        <message>
            <source>GEOM_Z_I</source>
            <translation>Z%1 :</translation>
        </message>
        <message>
            <source>GEOM_SHAPES_ON_SHAPE_TITLE</source>
            <translation>Get shapes on shape</translation>
        </message>
        <message>
            <source>GEOM_SCALE_FACTOR_X</source>
            <translation>Scale Factor X :</translation>
        </message>
        <message>
            <source>GEOM_SCALE_FACTOR_Y</source>
            <translation>Scale Factor Y :</translation>
        </message>
        <message>
            <source>GEOM_SCALE_FACTOR_Z</source>
            <translation>Scale Factor Z :</translation>
        </message>
        <message>
            <source>GEOM_STATE_IN</source>
            <translation>IN</translation>
        </message>
        <message>
            <source>GEOM_STATE_OUT</source>
            <translation>OUT</translation>
        </message>
        <message>
            <source>GEOM_STATE_ON</source>
            <translation>ON</translation>
        </message>
        <message>
            <source>GEOM_STATE_ONIN</source>
            <translation>ONIN</translation>
        </message>
        <message>
            <source>GEOM_STATE_ONOUT</source>
            <translation>ONOUT</translation>
        </message>
        <message>
            <source>GEOM_STATE_INOUT</source>
            <translation>INOUT</translation>
        </message>
        <message>
            <source>TOP_GET_SHAPES_ON_SHAPES</source>
            <translation>Get shapes on shape</translation>
        </message>
        <message>
            <source>MEN_GET_SHAPES_ON_SHAPES</source>
            <translation>Get Shapes on Shape</translation>
        </message>
        <message>
            <source>STB_GET_SHAPES_ON_SHAPES</source>
            <translation>Get shapes on shape</translation>
        </message>
        <message>
            <source>GEOM_PUBLISH_RESULT_GRP</source>
            <translation>Advanced options</translation>
        </message>
        <message>
            <source>GEOM_RESTORE_SUB_SHAPES</source>
            <translation>Set presentation parameters and subshapes from arguments</translation>
        </message>
        <message>
            <source>GEOM_ALL_IMPORT_FILES</source>
            <translation>All supported formats ( %1 )</translation>
        </message>
        <message>
            <source>GEOM_UNSUPPORTED_TYPE</source>
            <translation>Unsupported format for the file</translation>
        </message>
        <message>
            <source>GEOM_UNKNOWN_IMPORT_ERROR</source>
            <translation>Unknown error</translation>
        </message>
        <message>
            <source>GEOM_IMPORT_ERRORS</source>
            <translation>Import operation has finished with errors:</translation>
        </message>
    </context>
    <context>
        <name>BasicGUI_MarkerDlg</name>
        <message>
            <source>CAPTION</source>
            <translation>Local CS Construction</translation>
        </message>
        <message>
            <source>DX</source>
            <translation>Dx</translation>
        </message>
        <message>
            <source>DY</source>
            <translation>Dy</translation>
        </message>
        <message>
            <source>DZ</source>
            <translation>Dz</translation>
        </message>
        <message>
            <source>LCS_NAME</source>
            <translation>LocalCS</translation>
        </message>
        <message>
            <source>LOCALCS</source>
            <translation>Local coordinate system</translation>
        </message>
        <message>
            <source>ORIGIN</source>
            <translation>Coordinates of origin</translation>
        </message>
        <message>
            <source>VEC_PARALLEL</source>
            <translation>Coordinate system axes cannot be parallel</translation>
        </message>
        <message>
            <source>XDIR</source>
            <translation>X axis direction</translation>
        </message>
        <message>
            <source>YDIR</source>
            <translation>Y axis direction</translation>
        </message>
    </context>
    <context>
        <name>BlocksGUI_BlockDlg</name>
        <message>
            <source>FACE_1</source>
            <translation>Face 1</translation>
        </message>
        <message>
            <source>FACE_2</source>
            <translation>Face 2</translation>
        </message>
        <message>
            <source>FACE_3</source>
            <translation>Face 3</translation>
        </message>
        <message>
            <source>FACE_4</source>
            <translation>Face 4</translation>
        </message>
        <message>
            <source>FACE_5</source>
            <translation>Face 5</translation>
        </message>
        <message>
            <source>FACE_6</source>
            <translation>Face 6</translation>
        </message>
    </context>
    <context>
        <name>BlocksGUI_ExplodeDlg</name>
        <message>
            <source>NB_FACES_MAX</source>
            <translation>Max. nb. faces</translation>
        </message>
        <message>
            <source>NB_FACES_MIN</source>
            <translation>Min. nb. faces</translation>
        </message>
    </context>
    <context>
        <name>BlocksGUI_QuadFaceDlg</name>
        <message>
            <source>EDGE_1</source>
            <translation>Edge 1</translation>
        </message>
        <message>
            <source>EDGE_2</source>
            <translation>Edge 2</translation>
        </message>
        <message>
            <source>EDGE_3</source>
            <translation>Edge 3</translation>
        </message>
        <message>
            <source>EDGE_4</source>
            <translation>Edge 4</translation>
        </message>
        <message>
            <source>VERTEX_1</source>
            <translation>Vertex 1</translation>
        </message>
        <message>
            <source>VERTEX_2</source>
            <translation>Vertex 2</translation>
        </message>
        <message>
            <source>VERTEX_3</source>
            <translation>Vertex 3</translation>
        </message>
        <message>
            <source>VERTEX_4</source>
            <translation>Vertex 4</translation>
        </message>
    </context>
    <context>
        <name>BlocksGUI_TrsfDlg</name>
        <message>
            <source>FACE_1</source>
            <translation>Face 1</translation>
        </message>
        <message>
            <source>FACE_1U</source>
            <translation>Face 1 U</translation>
        </message>
        <message>
            <source>FACE_1V</source>
            <translation>Face 1 V</translation>
        </message>
        <message>
            <source>FACE_2</source>
            <translation>Face 2</translation>
        </message>
        <message>
            <source>FACE_2U</source>
            <translation>Face 2 U</translation>
        </message>
        <message>
            <source>FACE_2V</source>
            <translation>Face 2 V</translation>
        </message>
    </context>
    <context>
        <name>EntityGUI_SketcherDlg</name>
        <message>
            <source>CANNOT_CLOSE</source>
            <translation>It is impossible to close sketch
Number of sketch points too small</translation>
        </message>
    </context>
    <context>
        <name>EntityGUI_SubShapeDlg</name>
        <message>
            <source>NO_SUBSHAPES_SELECTED</source>
            <translation>Please, select one or more sub-shapes</translation>
        </message>
    </context>
    <context>
        <name>GroupGUI</name>
        <message>
            <source>NO_GROUP</source>
            <translation>Please, select a group to edit</translation>
        </message>
    </context>
    <context>
        <name>GroupGUI_GroupDlg</name>
        <message>
            <source>ADD</source>
            <translation>Add</translation>
        </message>
        <message>
            <source>CREATE_GROUP_TITLE</source>
            <translation>Create Group</translation>
        </message>
        <message>
            <source>EDIT_GROUP_TITLE</source>
            <translation>Edit Group</translation>
        </message>
        <message>
            <source>EMPTY_LIST</source>
            <translation>Please, select one or more sub-shapes to put into the group</translation>
        </message>
        <message>
            <source>EMPTY_NAME</source>
            <translation>Please, specify a non-empty group name</translation>
        </message>
        <message>
            <source>GROUP_NAME</source>
            <translation>Group Name</translation>
        </message>
        <message>
            <source>GROUP_PREFIX</source>
            <translation>Group</translation>
        </message>
        <message>
            <source>MAIN_SHAPE</source>
            <translation>Main Shape</translation>
        </message>
        <message>
            <source>MAIN_SUB_SHAPES</source>
            <translation>Main Shape And Sub-Shapes</translation>
        </message>
        <message>
            <source>NO_GROUP</source>
            <translation>Please, select a group to edit</translation>
        </message>
        <message>
            <source>NO_MAIN_OBJ</source>
            <translation>Please, select a main shape</translation>
        </message>
        <message>
            <source>REMOVE</source>
            <translation>Remove</translation>
        </message>
        <message>
            <source>SELECT_ALL</source>
            <translation>Select All</translation>
        </message>
        <message>
            <source>SHAPE_SEL_RESTR</source>
            <translation>Main Shape Selection restriction</translation>
        </message>
        <message>
            <source>SHAPE_TYPE</source>
            <translation>Shape Type</translation>
        </message>
        <message>
            <source>NO_RESTR</source>
            <translation>No restriction</translation>
        </message>
        <message>
            <source>GEOM_PARTS_OF_SHAPE2</source>
            <translation>Geometrical parts of the Second Shape</translation>
        </message>
        <message>
            <source>SUBSHAPES_OF_SHAPE2</source>
            <translation>Only Sub-Shapes of the Second Shape</translation>
        </message>
        <message>
            <source>SECOND_SHAPE</source>
            <translation>Second Shape</translation>
        </message>
    </context>
    <context>
        <name>MeasureGUI_1Sel1TextView1Check_QTD</name>
        <message>
            <source>CHECK_SHAPE_GEOMETRY</source>
            <translation>Check also geometry</translation>
        </message>
    </context>
    <context>
        <name>MeasureGUI_PointDlg</name>
        <message>
            <source>CAPTION</source>
            <translation>Point Coordinates</translation>
        </message>
        <message>
            <source>COORDINATES</source>
            <translation>Point and its coordinates</translation>
        </message>
        <message>
            <source>POINT</source>
            <translation>Point</translation>
        </message>
        <message>
            <source>X</source>
            <translation>X</translation>
        </message>
        <message>
            <source>Y</source>
            <translation>Y</translation>
        </message>
        <message>
            <source>Z</source>
            <translation>Z</translation>
        </message>
    </context>
    <context>
        <name>OperationGUI_ChamferDlg</name>
        <message>
            <source>D</source>
            <translation>D</translation>
        </message>
        <message>
            <source>FACE_1</source>
            <translation>Face 1</translation>
        </message>
        <message>
            <source>FACE_2</source>
            <translation>Face 2</translation>
        </message>
        <message>
            <source>SELECTED_FACES</source>
            <translation>Selected faces</translation>
        </message>
    </context>
    <context>
        <name>OperationGUI_FilletDlg</name>
        <message>
            <source>SELECTED_EDGES</source>
            <translation>Selected edges</translation>
        </message>
        <message>
            <source>SELECTED_FACES</source>
            <translation>Selected faces</translation>
        </message>
    </context>
    <context>
        <name>RepairGUI_FreeBoundDlg</name>
        <message>
            <source>CAPTION</source>
            <translation>Check free boundaries</translation>
        </message>
        <message>
            <source>FREE_BOUND</source>
            <translation>Free boundaries</translation>
        </message>
        <message>
            <source>NUMBER_CLOSED</source>
            <translation>Number of closed free boundaries: </translation>
        </message>
        <message>
            <source>NUMBER_OPEN</source>
            <translation>Number of open free boundaries: </translation>
        </message>
    </context>
    <context>
        <name>RepairGUI_GlueDlg</name>
        <message>
            <source>FACES_FOR_GLUING_ARE_DETECTED</source>
            <translation>There are %1 face(s) that can be glued. They are coloured on the screen with red colour.
Please close this message box and select faces for glueing</translation>
        </message>
        <message>
            <source>GLUE_FACES</source>
            <translation>Glue faces</translation>
        </message>
        <message>
            <source>SELECT_FACES</source>
            <translation>Select Faces</translation>
        </message>
        <message>
            <source>THERE_ARE_NO_FACES_FOR_GLUING</source>
            <translation>There are no faces for gluing</translation>
        </message>
    </context>
    <context>
        <name>RepairGUI_ShapeProcessDlg</name>
        <message>
            <source>ERROR_NO_OBJECTS</source>
            <translation>Please, select a geometrical object for Shape Processing.</translation>
        </message>
        <message>
            <source>ERROR_NO_OPERATORS</source>
            <translation>Please, select at least one Shape Process operation to proceed.</translation>
        </message>
        <message>
            <source>TIME_CONSUMING</source>
            <translation>Enabling this option may result in a very time-consuming operation for some input shapes.
Would you like to continue?</translation>
        </message>
    </context>
    <context>
        <name>GEOMToolsGUI_DeleteDlg</name>
        <message>
            <source>GEOM_REALLY_DELETE</source>
            <translation>Do you really want to delete %1 object(s)?</translation>
        </message>
        <message>
            <source>GEOM_REALLY_DELETE_ALL</source>
            <translation>Do you really want to delete all objects?</translation>
        </message>
        <message>
            <source>GEOM_DELETE_OBJECTS</source>
            <translation>Delete objects</translation>
        </message>
    </context>
</TS>