geom/adm_local/cmake_files/SalomeGEOMConfig.cmake.in

# - Config file for the @PROJECT_NAME@ package
# It defines the following variables. 
# Specific to the pacakge @PROJECT_NAME@ itself:
#  @PROJECT_NAME_UC@_ROOT_DIR_EXP - the root path of the installation providing this CMake file
#

###############################################################
#  Copyright (C) 2007-2013  CEA/DEN, EDF R&D, OPEN CASCADE
#
#  Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
#  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
#  This library is free software; you can redistribute it and/or
#  modify it under the terms of the GNU Lesser General Public
#  License as published by the Free Software Foundation; either
#  version 2.1 of the License.
#
#  This library is distributed in the hope that it will be useful,
#  but WITHOUT ANY WARRANTY; without even the implied warranty of
#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#  Lesser General Public License for more details.
#
#  You should have received a copy of the GNU Lesser General Public
#  License along with this library; if not, write to the Free Software
#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
#  See http://www.salome-platform.org/ or
#  email : webmaster.salome@opencascade.com
###############################################################

### Initialisation performed by CONFIGURE_PACKAGE_CONFIG_FILE:
@PACKAGE_INIT@

# Load the dependencies for the libraries of @PROJECT_NAME@ 
# (contains definitions for IMPORTED targets). This is only 
# imported if we are not built as a subproject (in this case targets are already there)
IF(NOT TARGET GEOMbasic AND NOT @PROJECT_NAME@_BINARY_DIR)
  INCLUDE("@PACKAGE_SALOME_INSTALL_CMAKE_LOCAL@/@PROJECT_NAME@Targets.cmake")
ENDIF()   

# Package root dir:
SET_AND_CHECK(GEOM_ROOT_DIR_EXP "@PACKAGE_CMAKE_INSTALL_PREFIX@")

# Include directories
SET_AND_CHECK(GEOM_INCLUDE_DIRS "${GEOM_ROOT_DIR_EXP}/@SALOME_INSTALL_HEADERS@")

#### Now the specificities

# Options exported by the package:
SET(SALOME_BUILD_DOC    @SALOME_BUILD_DOC@)
SET(SALOME_BUILD_TESTS  @SALOME_BUILD_TESTS@)

# Advanced options
SET(SALOME_BUILD_GUI       @SALOME_BUILD_GUI@)
SET(SALOME_GEOM_USE_OPENCV @SALOME_GEOM_USE_OPENCV@)

# Level 1 prerequisites:
SET_AND_CHECK(KERNEL_ROOT_DIR_EXP "@PACKAGE_KERNEL_ROOT_DIR@")
SET_AND_CHECK(CAS_ROOT_DIR_EXP "@PACKAGE_CAS_ROOT_DIR@")

# Optional level 1 prerequisites:
IF(SALOME_BUILD_GUI)
  SET_AND_CHECK(GUI_ROOT_DIR_EXP "@PACKAGE_GUI_ROOT_DIR@")
ENDIF()
IF(SALOME_GEOM_USE_OPENCV)
  SET_AND_CHECK(OPENCV_ROOT_DIR_EXP "@PACKAGE_OPENCV_ROOT_DIR@")
ENDIF()

# For all prerequisites, load the corresponding targets if the package was used 
# in CONFIG mode. This ensures dependent projects link correctly
# without having to set LD_LIBRARY_PATH:
SET(_PREREQ CAS SalomeGUI OpenCV)
SET(_PREREQ_CONFIG_DIR "@CAS_DIR@" "@SalomeGUI_DIR@" "@OpenCV_DIR@")
LIST(LENGTH _PREREQ_CONFIG_DIR _list_len)
# Another CMake stupidity - FOREACH(... RANGE r) generates r+1 numbers ...
MATH(EXPR _range "${_list_len}-1")
FOREACH(_p RANGE ${_range})
  LIST(GET _PREREQ            ${_p} _pkg    )
  LIST(GET _PREREQ_CONFIG_DIR ${_p} _pkg_dir)
  IF(_pkg_dir)
     MESSAGE(STATUS "===> Reloading targets from ${_pkg} ...")
     FIND_PACKAGE(${_pkg} REQUIRED NO_MODULE 
          PATHS "${_pkg_dir}" 
          NO_DEFAULT_PATH)
  ENDIF()
ENDFOREACH()

# Installation directories
SET(SALOME_INSTALL_BINS "@SALOME_INSTALL_BINS@")
SET(SALOME_INSTALL_LIBS "@SALOME_INSTALL_LIBS@")
SET(SALOME_INSTALL_IDLS "@SALOME_INSTALL_IDLS@")
SET(SALOME_INSTALL_HEADERS "@SALOME_INSTALL_HEADERS@")
SET(SALOME_INSTALL_SCRIPT_SCRIPTS "@SALOME_INSTALL_SCRIPT_SCRIPTS@")
SET(SALOME_INSTALL_SCRIPT_DATA "@SALOME_INSTALL_SCRIPT_DATA@")
SET(SALOME_INSTALL_SCRIPT_PYTHON "@SALOME_INSTALL_SCRIPT_PYTHON@")
SET(SALOME_INSTALL_CMAKE "@SALOME_INSTALL_CMAKE@")
SET(SALOME_INSTALL_CMAKE_LOCAL "@SALOME_INSTALL_CMAKE_LOCAL@")
SET(SALOME_INSTALL_PYTHON "@SALOME_INSTALL_PYTHON@")
SET(SALOME_INSTALL_PYTHON_SHARED "@SALOME_INSTALL_PYTHON_SHARED@")
SET(SALOME_INSTALL_RES "@SALOME_INSTALL_RES@")
SET(SALOME_INSTALL_DOC "@SALOME_INSTALL_DOC@")
SET(SALOME_INSTALL_AMCONFIG_LOCAL "@SALOME_INSTALL_AMCONFIG_LOCAL@")

# Include KERNEL targets if they were not already loaded:
IF(NOT (TARGET SALOMEBasics)) 
  INCLUDE("${KERNEL_ROOT_DIR_EXP}/${SALOME_INSTALL_CMAKE}/SalomeKERNELTargets.cmake")
ENDIF()

# Exposed GEOM targets:
SET(GEOM_GEOMArchimede GEOMArchimede)
SET(GEOM_BREPExport BREPExport)
SET(GEOM_BREPImport BREPImport)
SET(GEOM_BlockFix BlockFix)
SET(GEOM_GEOMbasic GEOMbasic)
SET(GEOM_GEOMAlgo GEOMAlgo)
SET(GEOM_GEOMClient GEOMClient)
SET(GEOM_GEOMImpl GEOMImpl)
SET(GEOM_GEOMUtils GEOMUtils)
SET(GEOM_GEOMEngine GEOMEngine)
SET(GEOM_GEOM_SupervEngine GEOM_SupervEngine)
SET(GEOM_IGESExport IGESExport)
SET(GEOM_IGESImport IGESImport)
SET(GEOM_GEOMSketcher GEOMSketcher)
SET(GEOM_SalomeIDLGEOM SalomeIDLGEOM)
SET(GEOM_STEPExport STEPExport)
SET(GEOM_STEPImport STEPImport)
SET(GEOM_STLExport STLExport)
SET(GEOM_ShHealOper ShHealOper)
SET(GEOM_XAO XAO)
SET(GEOM_AdvancedEngine AdvancedEngine)
SET(GEOM_AdvancedGUI AdvancedGUI)
SET(GEOM_BasicGUI BasicGUI)
SET(GEOM_BlocksGUI BlocksGUI)
SET(GEOM_BooleanGUI BooleanGUI)
SET(GEOM_BuildGUI BuildGUI)
SET(GEOM_DisplayGUI DisplayGUI)
SET(GEOM_DlgRef DlgRef)
SET(GEOM_EntityGUI EntityGUI)
SET(GEOM_GEOMBase GEOMBase)
SET(GEOM_GEOMFiltersSelection GEOMFiltersSelection)
SET(GEOM_GEOM GEOM)
SET(GEOM_GEOMToolsGUI GEOMToolsGUI)
SET(GEOM_GenerationGUI GenerationGUI)
SET(GEOM_GroupGUI GroupGUI)
SET(GEOM_Material Material)
SET(GEOM_MeasureGUI MeasureGUI)
SET(GEOM_GEOMObject GEOMObject)
SET(GEOM_OCC2VTK OCC2VTK)
SET(GEOM_VTKExport VTKExport)
SET(GEOM_OperationGUI OperationGUI)
SET(GEOM_PrimitiveGUI PrimitiveGUI)
SET(GEOM_RepairGUI RepairGUI)
SET(GEOM_TransformationGUI TransformationGUI)
SET(GEOM_ImportExportGUI ImportExportGUI)
SET(GEOM_GEOMShapeRec GEOMShapeRec)