geom/doc/salome/gui/GEOM/input/extruded_cut_operation.doc

53 lines
1.4 KiB
Plaintext
Raw Normal View History

2012-08-09 13:58:02 +06:00
/*!
\page extruded_cut_operation_page Extruded cut
The <b>Extruded cut</b> operation allows you to easily remove material from a \b solid by extruding a profile along the normal to its plane.
\image html extruded_cut_example.png
To produce the <b>extruded cut</b>:
<ol>
<li> Draw the \b profile of the extrusion. It can be:
<ul>
<li> a <a href="create_sketcher_page.html">\b Sketch </a> drawn on a planar face of the object you want to cut.</li>
<li> any closed edge or wire of the desired shape (circle, ellipse ...).</li>
</ul>
</li>
<li> In the <b>Main Menu</b> select <b>Operations - > Extruded Cut</b> or click on
\image html extruded_cut.png
</li>
<li> Fill in the dialog box fields:
\image html extruded_cut_dlg.png
</li>
</ol>
The input arguments are:
- The <b>initial shape</b> you want to cut. It must be a solid or a compound made of a single solid.
- The \b profile. It must be a \b closed edge or wire and it must be \b planar.
- The \b height of extrusion. It's calculated from the <b>base profile</b> along the normal to its plane.
And optionnaly:
- A <b>draft angle</b> in degrees. Activated by clicking on \image html draft.png
The direction can be reversed by pushing the <b> Change direction </b> button: \image html change_direction.png
This functionality is available via the textual interface with the command:
\n <b>TUI Command:</b> <em>geompy.MakeExtrudedCut(InitShape, Profile, Height,Angle),</em>
*/