0022750: [EDF] Improve ergonomics of the "Detect Self-intersections" dialog box

doc/salome/gui/GEOM/input/check_self_intersections.doc

@@ -9,8 +9,15 @@ This operation checks the topology of the selected shape to detect self-intersec
 In this dialog:
 
 - \b Object - the checked object. \b Selection button allows picking it in the viewer or in the object browser.
-- \b Errors list contains the list of intersections. Select the intersection to show <b>Incriminated Sub-shapes</b> in the field to the right. 
+- <b>Level of check</b> - The combo box that allows to set the level of checking shape on self-interference.
-
+  It defines which interferferences will be checked. Default value is "All interferences".
+- <b>Compute self-intersections</b> button computes self-interferences.
+- \b Summary section contains the general report if the object has self-intersections and/or if errors are occured during computation.
+- \b Self-intersections list contains the list of self-intersections detected.
+Select the intersection to show <b>Sub-shapes</b> in the field to the right. 
+- \b Apply and <b>Apply and Close</b> buttons are used to store selected self-intersected shapes in the study for further analysis.
+If no shapes are selected, but an intersection is selected the both of intersected shapes are stored. If no intersections selected
+all shapes of all intersections are stored in the study.
 
 \note This tool is useful for detection of shapes, not suitable for
 arguments of Boolean operations and Partition algorithm.
@@ -18,8 +25,10 @@ For more information about Partition and Boolean Operations Algorithms
 and their limitations refer to <a href="SALOME_BOA_PA.pdf">this document</a>.
 
 \n <b>Result:</b> Boolean.
-\n <b>TUI Command:</b> <em>geompy.CheckSelfIntersections(theShape),</em>
+\n <b>TUI Command:</b> <em>geompy.CheckSelfIntersections(theShape, theCheckLevel = GEOM.SI_ALL),</em> \n
-where \em theShape is the shape checked for validity.
+where: \n
+\em theShape is the shape checked for validity. \n
+\em theCheckLevel is the level of check. Default value is GEOM.SI_ALL to check all interferences.
 
 See also a \ref tui_check_self_intersections_page "TUI example".
 

idl/GEOM_Gen.idl

@@ -187,6 +187,20 @@ module GEOM
     FDT_String
   };
 
+  /**
+   * This enumeration represents the level of checking shape on
+   * self-interference. It defines which interferferences will be checked.
+   */
+  enum si_check_level
+  {
+    SI_V_V,     // only V/V interferences
+    SI_V_E,     // V/V and V/E interferences
+    SI_E_E,     // V/V, V/E and E/E interferences
+    SI_V_F,     // V/V, V/E, E/E and V/F interferences
+    SI_E_F,     // V/V, V/E, E/E, V/F and E/F interferences
+    SI_ALL      // all interferences
+  };
+
 
  /*!
    * \brief Object creation parameters
@@ -4080,10 +4094,12 @@ module GEOM
     /*!
      *  \brief Check a topology of the given shape on self-intersections presence.
      *  \param theShape Shape to check validity of.
+     *  \param theCheckLevel the level of self-interference check.
      *  \param theIntersections Output. List of intersected sub-shapes IDs, it contains pairs of IDs.
      *  \return TRUE, if the shape does not have any self-intersections.
      */
     boolean CheckSelfIntersections (in GEOM_Object theShape,
+                                    in long        theCheckLevel,
                                     out ListOfLong theIntersections);
 
     /*!

src/GEOMGUI/GEOM_msg_en.ts

@@ -415,22 +415,6 @@ Please, select face, shell or solid and try again</translation>
         <source>GEOM_CHECK_SELF_INTERSECTIONS</source>
         <translation>Detect Self-intersections</translation>
     </message>
-    <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
-        <translation>Detection of self-intersections failed</translation>
-    </message>
-    <message>
-        <source>GEOM_NO_SELF_INTERSECTIONS</source>
-        <translation>There are no self-intersections in the shape</translation>
-    </message>
-    <message>
-        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
-        <translation>Some self-intersections detected</translation>
-    </message>
-    <message>
-        <source>GEOM_CHECK_SELF_INTERSECTIONS_ERRORS</source>
-        <translation>Warning: there were errors during the operation, so the list may be incomplete.</translation>
-    </message>
     <message>
         <source>GEOM_CIRCLE</source>
         <translation>Circle</translation>
@@ -6967,4 +6951,71 @@ Do you want to create new material?</translation>
         <translation>V-Isoline</translation>
     </message>
 </context>
+<context>
+    <name>MeasureGUI_CheckSelfIntersectionsDlg</name>
+    <message>
+        <source>GEOM_CHECK_INTE_INTERSECTIONS</source>
+        <translation>Self-intersections</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_SUBSHAPES</source>
+        <translation>Sub-shapes</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_CHECK_LEVEL</source>
+        <translation>Level of check</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_SUMMARY</source>
+        <translation>Summary</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_COMPUTE</source>
+        <translation>Compute self-intersections</translation>
+    </message>
+    <message>
+        <source>GEOM_SELF_INTERSECTION_NAME</source>
+        <translation>Self_intersection</translation>
+    </message>
+    <message>
+        <source>GEOM_NO_SELF_INTERSECTIONS</source>
+        <translation>There are no self-intersections in the shape</translation>
+    </message>
+    <message>
+        <source>GEOM_SELF_INTERSECTIONS_FOUND</source>
+        <translation>Some self-intersections detected</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_FAILED</source>
+        <translation>Detection of self-intersections failed</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_SELF_INTERSECTIONS_ERRORS</source>
+        <translation>Warning: there were errors during the operation, so the list may be incomplete.</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_V_V</source>
+        <translation>Vertex to Vertex</translation>
+    </message>
+    <message>
+        <source>GEOM_CHECK_INTE_V_E</source>
+        <translation>Vertex to Edge + all above</translation>
+    </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_E</source>
+    <translation>Edge to Edge + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_V_F</source>
+    <translation>Vertex to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_E_F</source>
+    <translation>Edge to Face + all above</translation>
+  </message>
+  <message>
+    <source>GEOM_CHECK_INTE_ALL</source>
+    <translation>All interferences</translation>
+  </message>
+</context>
 </TS>

src/GEOMImpl/GEOMImpl_IMeasureOperations.cxx

@@ -1501,6 +1501,7 @@ TCollection_AsciiString GEOMImpl_IMeasureOperations::PrintShapeErrors
 //=============================================================================
 bool GEOMImpl_IMeasureOperations::CheckSelfIntersections
                          (Handle(GEOM_Object)                 theShape,
+                          const SICheckLevel                  theCheckLevel,
                           Handle(TColStd_HSequenceOfInteger)& theIntersections)
 {
   SetErrorCode(KO);
@@ -1534,6 +1535,7 @@ bool GEOMImpl_IMeasureOperations::CheckSelfIntersections
   //
   BOPAlgo_CheckerSI aCSI; // checker of self-interferences
   aCSI.SetArguments(aLCS);
+  aCSI.SetLevelOfCheck(theCheckLevel);
 
   // 1. Launch the checker
   aCSI.Perform();

src/GEOMImpl/GEOMImpl_IMeasureOperations.hxx

@@ -85,6 +85,20 @@ class GEOMImpl_IMeasureOperations : public GEOM_IOperations {
     SK_ADVANCED,     // all advanced shapes (temporary implementation)
   };
 
+  /**
+   * This enumeration represents the level of checking shape on
+   * self-interference. It defines which interferferences will be checked.
+   */
+  enum SICheckLevel
+  {
+    SI_V_V = 0, // only V/V interferences
+    SI_V_E,     // V/V and V/E interferences
+    SI_E_E,     // V/V, V/E and E/E interferences
+    SI_V_F,     // V/V, V/E, E/E and V/F interferences
+    SI_E_F,     // V/V, V/E, E/E, V/F and E/F interferences
+    SI_ALL      // all interferences
+  };
+
   Standard_EXPORT ShapeKind KindOfShape (Handle(GEOM_Object) theShape,
                                          Handle(TColStd_HSequenceOfInteger)& theIntegers,
                                          Handle(TColStd_HSequenceOfReal)&    theDoubles);
@@ -141,6 +155,7 @@ class GEOMImpl_IMeasureOperations : public GEOM_IOperations {
                                    const std::list<ShapeError> &theErrors);
 
   Standard_EXPORT bool CheckSelfIntersections (Handle(GEOM_Object) theShape,
+                                               const SICheckLevel  theCheckLevel,
                                                Handle(TColStd_HSequenceOfInteger)& theIntersections);
 
   Standard_EXPORT TCollection_AsciiString IsGoodForSolid (Handle(GEOM_Object) theShape);

src/GEOM_I/GEOM_IMeasureOperations_i.cc

@@ -706,6 +706,7 @@ char* GEOM_IMeasureOperations_i::PrintShapeErrors
  */
 //=============================================================================
 CORBA::Boolean GEOM_IMeasureOperations_i::CheckSelfIntersections (GEOM::GEOM_Object_ptr theShape,
+                                                                  CORBA::Long           theCheckLevel,
                                                                   GEOM::ListOfLong_out  theIntersections)
 {
   // Set a not done flag
@@ -720,10 +721,35 @@ CORBA::Boolean GEOM_IMeasureOperations_i::CheckSelfIntersections (GEOM::GEOM_Obj
   Handle(GEOM_Object) aShape = GetObjectImpl(theShape);
 
   if (!aShape.IsNull()) {
+    GEOMImpl_IMeasureOperations::SICheckLevel aCheckLevel;
+
+    switch(theCheckLevel) {
+    case GEOM::SI_V_V:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_V_V;
+      break;
+    case GEOM::SI_V_E:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_V_E;
+      break;
+    case GEOM::SI_E_E:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_E_E;
+      break;
+    case GEOM::SI_V_F:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_V_F;
+      break;
+    case GEOM::SI_E_F:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_E_F;
+      break;
+    case GEOM::SI_ALL:
+    default:
+      aCheckLevel = GEOMImpl_IMeasureOperations::SI_ALL;
+      break;
+    }
+
     Handle(TColStd_HSequenceOfInteger) anIntegers = new TColStd_HSequenceOfInteger;
 
     // Detect self-intersections
-    isGood = GetOperations()->CheckSelfIntersections(aShape, anIntegers);
+    isGood = GetOperations()->CheckSelfIntersections
+      (aShape, aCheckLevel, anIntegers);
 
     int nbInts = anIntegers->Length();
 

src/GEOM_I/GEOM_IMeasureOperations_i.hh

@@ -97,6 +97,7 @@ class GEOM_I_EXPORT GEOM_IMeasureOperations_i :
               const GEOM::GEOM_IMeasureOperations::ShapeErrors &theErrors);
 
   CORBA::Boolean CheckSelfIntersections (GEOM::GEOM_Object_ptr theShape,
+                                         CORBA::Long           theCheckLevel,
                                          GEOM::ListOfLong_out  theIntersections);
 
   char* IsGoodForSolid (GEOM::GEOM_Object_ptr theShape);

src/GEOM_SWIG/geomBuilder.py

@@ -10569,22 +10569,38 @@ class geomBuilder(object, GEOM._objref_GEOM_Gen):
 
         ## Detect self-intersections in the given shape.
         #  @param theShape Shape to check.
+        #  @param theCheckLevel is the level of self-intersection check.
+        #         Possible input values are:
+        #         - GEOM.SI_V_V(0) - only V/V interferences
+        #         - GEOM.SI_V_E(1) - V/V and V/E interferences
+        #         - GEOM.SI_E_E(2) - V/V, V/E and E/E interferences
+        #         - GEOM.SI_V_F(3) - V/V, V/E, E/E and V/F interferences
+        #         - GEOM.SI_E_F(4) - V/V, V/E, E/E, V/F and E/F interferences
+        #         - GEOM.SI_ALL(5) - all interferences.
         #  @return TRUE, if the shape contains no self-intersections.
         #
         #  @ref tui_measurement_tools_page "Example"
         @ManageTransactions("MeasuOp")
-        def CheckSelfIntersections(self, theShape):
+        def CheckSelfIntersections(self, theShape, theCheckLevel = GEOM.SI_ALL):
             """
             Detect self-intersections in the given shape.
 
             Parameters:
                 theShape Shape to check.
+                theCheckLevel is the level of self-intersection check.
+                  Possible input values are:
+                   - GEOM.SI_V_V(0) - only V/V interferences
+                   - GEOM.SI_V_E(1) - V/V and V/E interferences
+                   - GEOM.SI_E_E(2) - V/V, V/E and E/E interferences
+                   - GEOM.SI_V_F(3) - V/V, V/E, E/E and V/F interferences
+                   - GEOM.SI_E_F(4) - V/V, V/E, E/E, V/F and E/F interferences
+                   - GEOM.SI_ALL(5) - all interferences.
  
             Returns:
                 TRUE, if the shape contains no self-intersections.
             """
             # Example: see GEOM_TestMeasures.py
-            (IsValid, Pairs) = self.MeasuOp.CheckSelfIntersections(theShape)
+            (IsValid, Pairs) = self.MeasuOp.CheckSelfIntersections(theShape, EnumToLong(theCheckLevel))
             RaiseIfFailed("CheckSelfIntersections", self.MeasuOp)
             return IsValid
 

src/MeasureGUI/MeasureGUI_CheckSelfIntersectionsDlg.cxx

@@ -24,8 +24,9 @@
 // File   : MeasureGUI_CheckSelfIntersectionsDlg.cxx
 
 #include "MeasureGUI_CheckSelfIntersectionsDlg.h"
-#include "MeasureGUI_Widgets.h"
+#include "MeasureGUI.h"
 
+#include <SUIT_OverrideCursor.h>
 #include <SUIT_Session.h>
 #include <SUIT_ResourceMgr.h>
 #include <LightApp_SelectionMgr.h>
@@ -34,6 +35,7 @@
 
 #include <TopTools_IndexedMapOfShape.hxx>
 #include <TopExp.hxx>
+#include <TColStd_IndexedMapOfInteger.hxx>
 #include <TColStd_MapOfInteger.hxx>
 
 #include <DlgRef.h>
@@ -41,6 +43,8 @@
 #include <GEOMBase.h>
 #include <GEOMImpl_Types.hxx>
 
+#include <QListWidget>
+
 #define TEXTEDIT_FONT_FAMILY "Courier"
 #define TEXTEDIT_FONT_SIZE 11
 
@@ -52,7 +56,14 @@
 //            true to construct a modal dialog.
 //=================================================================================
 MeasureGUI_CheckSelfIntersectionsDlg::MeasureGUI_CheckSelfIntersectionsDlg (GeometryGUI* GUI, QWidget* parent)
-  : MeasureGUI_Skeleton(GUI, parent, false)
+  : GEOMBase_Skeleton (GUI, parent, false),
+    myTextView        (0),
+    mySelButton       (0),
+    myEditObjName     (0),
+    myLevelBox        (0),
+    myComputeButton   (0),
+    myInteList        (0),
+    myShapeList       (0)
 {
   SUIT_ResourceMgr* aResMgr = SUIT_Session::session()->resourceMgr();
   QPixmap image0 (aResMgr->loadPixmap("GEOM", tr("ICON_DLG_CHECK_SELF_INTERSECTIONS")));
@@ -63,31 +74,64 @@ MeasureGUI_CheckSelfIntersectionsDlg::MeasureGUI_CheckSelfIntersectionsDlg (Geom
   /***************************************************************/
   mainFrame()->GroupConstructors->setTitle(tr("GEOM_CHECK_SELF_INTERSECTIONS"));
   mainFrame()->RadioButton1->setIcon(image0);
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  myGrp = new MeasureGUI_1Sel1TextView2ListBox (centralWidget());
+  QGroupBox *aGrp      = new QGroupBox(tr("GEOM_CHECK_INFOS"));
-  myGrp->GroupBox1->setTitle(tr("GEOM_CHECK_INFOS"));
+  QLabel    *anObjLbl  = new QLabel(tr("GEOM_OBJECT"));
-  myGrp->TextLabel1->setText(tr("GEOM_OBJECT"));
+  QLabel    *anInteLbl = new QLabel(tr("GEOM_CHECK_INTE_INTERSECTIONS"));
+  QLabel    *aShapeLbl = new QLabel(tr("GEOM_CHECK_INTE_SUBSHAPES"));
+  QLabel    *aLevelLbl = new QLabel(tr("GEOM_CHECK_INTE_CHECK_LEVEL"));
+  QLabel    *aSummaryLbl = new QLabel(tr("GEOM_CHECK_INTE_SUMMARY"));
+  QFont      aFont (TEXTEDIT_FONT_FAMILY, TEXTEDIT_FONT_SIZE);
 
-  myGrp->TextView1->setReadOnly(true);
-  QFont aFont (TEXTEDIT_FONT_FAMILY, TEXTEDIT_FONT_SIZE);
   aFont.setStyleHint(QFont::TypeWriter, QFont::PreferAntialias);
-  myGrp->TextView1->setFont(aFont);
+  myTextView = new QTextBrowser;
+  myTextView->setReadOnly(true);
+  myTextView->setFont(aFont);
 
-  myGrp->PushButton1->setIcon(image1);
+  mySelButton = new QPushButton;
-  myGrp->LineEdit1->setReadOnly(true);
+  mySelButton->setIcon(image1);
+  mySelButton->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
 
-  myGrp->TextLabel2->setText(tr("GEOM_CHECK_BLOCKS_COMPOUND_ERRORS"));
+  myEditObjName = new QLineEdit;
-  myGrp->TextLabel3->setText(tr("GEOM_CHECK_BLOCKS_COMPOUND_SUBSHAPES"));
+  myEditObjName->setReadOnly(true);
 
-  myGrp->ListBox2->setSelectionMode(QAbstractItemView::ExtendedSelection);
+  myLevelBox = new QComboBox;
+
+  myComputeButton = new QPushButton(tr("GEOM_CHECK_INTE_COMPUTE"));
+
+
+  myInteList  = new QListWidget;
+  myShapeList = new QListWidget;
+  myShapeList->setSelectionMode(QAbstractItemView::ExtendedSelection);
+
+  QGridLayout *aGrpLayout = new QGridLayout(aGrp);
+
+  aGrpLayout->setMargin(9);
+  aGrpLayout->setSpacing(6);
+  aGrpLayout->addWidget(anObjLbl,        0, 0);
+  aGrpLayout->addWidget(anInteLbl,       5, 0);
+  aGrpLayout->addWidget(aShapeLbl,       5, 2);
+  aGrpLayout->addWidget(aLevelLbl,       1, 0);
+  aGrpLayout->addWidget(myLevelBox,      1, 1, 1, 2);
+  aGrpLayout->addWidget(myComputeButton, 2, 0, 1, 3);
+  aGrpLayout->addWidget(aSummaryLbl,     3, 0);
+  aGrpLayout->addWidget(myTextView,      4, 0, 1, 3);
+  aGrpLayout->addWidget(mySelButton,     0, 1);
+  aGrpLayout->addWidget(myEditObjName,   0, 2);
+  aGrpLayout->addWidget(myInteList,      6, 0, 1, 2);
+  aGrpLayout->addWidget(myShapeList,     6, 2);
 
   QVBoxLayout* layout = new QVBoxLayout (centralWidget());
   layout->setMargin(0); layout->setSpacing(6);
-  layout->addWidget(myGrp);
+  layout->addWidget(aGrp);
 
   /***************************************************************/
 
-  myHelpFileName = "using_measurement_tools_page.html#check_self_intersections_anchor";
+  myHelpFileName = "check_self_intersections_page.html";
 
   /* Initialisation */
   Init();
@@ -107,94 +151,302 @@ MeasureGUI_CheckSelfIntersectionsDlg::~MeasureGUI_CheckSelfIntersectionsDlg()
 //=================================================================================
 void MeasureGUI_CheckSelfIntersectionsDlg::Init()
 {
-  mySelBtn = myGrp->PushButton1;
+  // Fill in the combo box.
-  mySelEdit = myGrp->LineEdit1;
+  myLevelBox->insertItem(GEOM::SI_V_V, tr("GEOM_CHECK_INTE_V_V"));
-  MeasureGUI_Skeleton::Init();
+  myLevelBox->insertItem(GEOM::SI_V_E, tr("GEOM_CHECK_INTE_V_E"));
+  myLevelBox->insertItem(GEOM::SI_E_E, tr("GEOM_CHECK_INTE_E_E"));
+  myLevelBox->insertItem(GEOM::SI_V_F, tr("GEOM_CHECK_INTE_V_F"));
+  myLevelBox->insertItem(GEOM::SI_E_F, tr("GEOM_CHECK_INTE_E_F"));
+  myLevelBox->insertItem(GEOM::SI_ALL, tr("GEOM_CHECK_INTE_ALL"));
+  myLevelBox->setCurrentIndex(GEOM::SI_ALL);
 
-  connect(myGrp->ListBox1, SIGNAL(itemSelectionChanged()), SLOT(onErrorsListSelectionChanged()));
+  connect(myGeomGUI,          SIGNAL(SignalDeactivateActiveDialog()),
-  connect(myGrp->ListBox2, SIGNAL(itemSelectionChanged()), SLOT(onSubShapesListSelectionChanged()));
+          this,               SLOT(DeactivateActiveDialog()));
+  connect(myGeomGUI,          SIGNAL(SignalCloseAllDialogs()),
+          this,               SLOT(ClickOnCancel()));
+  connect(buttonOk(),         SIGNAL(clicked()), this, SLOT(ClickOnOk()));
+  connect(buttonApply(),      SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect(mySelButton,        SIGNAL(clicked()),
+          this,               SLOT(SetEditCurrentArgument()));
+  connect(myInteList,         SIGNAL(itemSelectionChanged()),
+          SLOT(onInteListSelectionChanged()));
+  connect(myShapeList,        SIGNAL(itemSelectionChanged()),
+          SLOT(onSubShapesListSelectionChanged()));
+  connect(myLevelBox,         SIGNAL(currentIndexChanged(int)),
+          this,               SLOT(clear()));
+  connect(myComputeButton,    SIGNAL(clicked()), this, SLOT(onCompute()));
+
+  LightApp_SelectionMgr* aSel = myGeomGUI->getApp()->selectionMgr();
+
+  connect(aSel,               SIGNAL(currentSelectionChanged()),
+          this,               SLOT(SelectionIntoArgument()));
+
+  initName( tr( "GEOM_SELF_INTERSECTION_NAME") );
+  buttonOk()->setEnabled(false);
+  buttonApply()->setEnabled(false);
+  myComputeButton->setEnabled(false);
+  activateSelection();
+  SelectionIntoArgument();
 }
 
 //=================================================================================
-// function : processObject
+// function : clear
 // purpose  :
 //=================================================================================
-void MeasureGUI_CheckSelfIntersectionsDlg::processObject()
+void MeasureGUI_CheckSelfIntersectionsDlg::clear()
 {
-  myGrp->ListBox1->clear();
+  myTextView->setText("");
-  myGrp->ListBox2->clear();
+  disconnect(myInteList, SIGNAL(itemSelectionChanged()), this, 0);
+  disconnect(myShapeList, SIGNAL(itemSelectionChanged()), this, 0);
+  myInteList->clear();
+  myShapeList->clear();
+  connect(myInteList,    SIGNAL(itemSelectionChanged()),
+          SLOT(onInteListSelectionChanged()));
+  connect(myShapeList,    SIGNAL(itemSelectionChanged()),
+          SLOT(onSubShapesListSelectionChanged()));
   erasePreview();
+  buttonOk()->setEnabled(false);
+  buttonApply()->setEnabled(false);
+  myComputeButton->setEnabled(true);
+}
 
-  if (myObj->_is_nil())
+//=================================================================================
+// function : onCompute
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::onCompute()
+{
+  bool    hasSelfInte = false;
+  QString anErrMsg("");
+
+  if (!findSelfIntersections(hasSelfInte, anErrMsg)) {
+    myTextView->setText(anErrMsg);
     return;
+  }
+
+  // Status and apply buttons
+  QString aMsg("");
+
+  if (hasSelfInte) {
+    aMsg += tr("GEOM_SELF_INTERSECTIONS_FOUND");
+    buttonOk()->setEnabled(true);
+    buttonApply()->setEnabled(true);
+  } else {
+    aMsg += tr("GEOM_NO_SELF_INTERSECTIONS");
+  }
+
+  if (!anErrMsg.isEmpty()) {
+    aMsg += "\n\n";
+    aMsg += anErrMsg;
+  }
+
+  myTextView->setText(aMsg);
+
+  // Pairs
+  QStringList anInteList;
+  QString anInteStr ("");
+  int nbPairs = myInters->length()/2;
+
+  for (int i = 1; i <= nbPairs; i++) {
+    anInteStr = "Intersection # ";
+    anInteStr += QString::number(i);
+    anInteList.append(anInteStr);
+  }
+
+  myInteList->addItems(anInteList);
+  myComputeButton->setEnabled(false);
+}
+
+//=================================================================================
+// function : ActivateThisDialog
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::ActivateThisDialog()
+{
+  GEOMBase_Skeleton::ActivateThisDialog();
+
+  LightApp_SelectionMgr* aSel = myGeomGUI->getApp()->selectionMgr();
+  if ( aSel )
+    connect( aSel, SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
+
+  activateSelection();
+  DISPLAY_PREVIEW_MACRO
+}
+
+//=================================================================================
+// function : DeactivateActiveDialog()
+// purpose  : public slot to deactivate if active
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::DeactivateActiveDialog()
+{
+  GEOMBase_Skeleton::DeactivateActiveDialog();
+}
+
+//=================================================================================
+// function : activateSelection
+// purpose  : 
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::activateSelection()
+{
+  globalSelection(GEOM_ALLSHAPES);
+}
+
+//=================================================================================
+// function : ClickOnOk()
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::ClickOnOk()
+{
+  if ( ClickOnApply() )
+    ClickOnCancel();
+}
+
+//=================================================================================
+// function : ClickOnApply()
+// purpose  :
+//=================================================================================
+bool MeasureGUI_CheckSelfIntersectionsDlg::ClickOnApply()
+{
+  if ( !onAccept() )
+    return false;
+
+  initName();
+  return true;
+}
+
+//=================================================================================
+// function : extractPrefix
+// purpose  :
+//=================================================================================
+bool MeasureGUI_CheckSelfIntersectionsDlg::extractPrefix() const
+{
+  return true;
+}
+
+//=================================================================================
+// function : createOperation
+// purpose  :
+//=================================================================================
+GEOM::GEOM_IOperations_ptr MeasureGUI_CheckSelfIntersectionsDlg::createOperation()
+{
+  return getGeomEngine()->GetIMeasureOperations( getStudyId() );
+}
+
+//=================================================================================
+// function : isValid
+// purpose  :
+//=================================================================================
+bool MeasureGUI_CheckSelfIntersectionsDlg::isValid( QString& )
+{
+  return !myObj->_is_nil();
+}
+
+//=================================================================================
+// function : SetEditCurrentArgument
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::SetEditCurrentArgument()
+{
+  myEditObjName->setFocus();
+  SelectionIntoArgument();
+}
+
+//=================================================================================
+// function : SelectionIntoArgument
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::SelectionIntoArgument()
+{
+  // Clear the dialog.
+  clear();
+  myObj = GEOM::GEOM_Object::_nil();
+
+  LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
+  SALOME_ListIO aSelList;
+  aSelMgr->selectedObjects(aSelList);
+
+  GEOM::GEOM_Object_var aSelectedObject = GEOM::GEOM_Object::_nil();
+
+  if (aSelList.Extent() > 0) {
+    aSelectedObject = GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
+  }
+
+  if (aSelectedObject->_is_nil()) {
+    myEditObjName->setText("");
+    return;
+  }
+
+  myObj = aSelectedObject;
+  myEditObjName->setText(GEOMBase::GetName(myObj));
+}
+
+//=================================================================================
+// function : enterEvent
+// purpose  :
+//=================================================================================
+void MeasureGUI_CheckSelfIntersectionsDlg::enterEvent(QEvent *)
+{
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
+    ActivateThisDialog();
+}
+
+//=================================================================================
+// function : findSelfIntersections
+// purpose  :
+//=================================================================================
+bool MeasureGUI_CheckSelfIntersectionsDlg::findSelfIntersections
+        (bool &HasSelfInte, QString &theErrMsg)
+{
+  if (myObj->_is_nil()) {
+    return false;
+  }
+
+  GEOM::GEOM_IMeasureOperations_var anOper =
+    GEOM::GEOM_IMeasureOperations::_narrow(getOperation());
+  bool isOK = true;
+  int  nbPairs  = 0;
+  int aLevel = myLevelBox->currentIndex();
 
-  QString aMsg ("");
-  GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow(getOperation());
-  bool isGood = false, isFailed = false;
-  int nbPairs = 0;
   try {
-    isGood = anOper->CheckSelfIntersections(myObj, myInters);
+    HasSelfInte = !anOper->CheckSelfIntersections(myObj, aLevel, myInters);
     nbPairs = myInters->length()/2;
+
     if (nbPairs*2 != myInters->length()) {
-      isFailed = true;
+      isOK = false;
     }
   }
   catch (const SALOME::SALOME_Exception& e) {
     SalomeApp_Tools::QtCatchCorbaException(e);
-    isFailed = true;
+    isOK = false;
-  }
-
-  if (!anOper->IsDone() && myInters->length() == 0) {
-    aMsg += tr(anOper->GetErrorCode());
-    myGrp->TextView1->setText(aMsg);
-    return;
-  }
-  else if (isFailed) {
-    aMsg += tr("GEOM_CHECK_SELF_INTERSECTIONS_FAILED");
-    myGrp->TextView1->setText(aMsg);
-    return;
-  }
-
-  // Status
-  if (isGood) {
-    aMsg += tr("GEOM_NO_SELF_INTERSECTIONS");
-  }
-  else {
-    aMsg += tr("GEOM_SELF_INTERSECTIONS_FOUND");
   }
 
   if (!anOper->IsDone()) {
-    aMsg += "\n\n";
+    if (myInters->length() == 0) {
-    aMsg += tr("GEOM_CHECK_SELF_INTERSECTIONS_ERRORS");
+      theErrMsg = tr(anOper->GetErrorCode());
+      isOK = false;
+    } else {
+      // Valid case. Display all computed self-intersections
+      theErrMsg = tr("GEOM_CHECK_SELF_INTERSECTIONS_ERRORS");
+    }
+  } else if (!isOK) {
+    theErrMsg = tr("GEOM_CHECK_SELF_INTERSECTIONS_FAILED");
   }
 
-  myGrp->TextView1->setText(aMsg);
+  return isOK;
-
-  // Pairs
-  QStringList aErrList;
-  QString aErrStr ("");
-  for (int i = 1; i <= nbPairs; i++) {
-    aErrStr = "Intersection # ";
-    aErrStr += QString::number(i);
-    aErrList.append(aErrStr);
-  }
-
-  myGrp->ListBox1->addItems(aErrList);
 }
 
 //=================================================================================
-// function : onErrorsListSelectionChanged
+// function : onInteListSelectionChanged
 // purpose  :
 //=================================================================================
-void MeasureGUI_CheckSelfIntersectionsDlg::onErrorsListSelectionChanged()
+void MeasureGUI_CheckSelfIntersectionsDlg::onInteListSelectionChanged()
 {
   erasePreview();
-  int aCurItem = myGrp->ListBox1->currentRow();
+  int aCurItem = myInteList->currentRow();
+
   if (aCurItem < 0)
     return;
 
-  //int nbPairs = myInters->length()/2;
-
   QStringList aSubShapeList;
   TopoDS_Shape aSelShape;
   if (!myObj->_is_nil() && GEOMBase::GetShape(myObj, aSelShape)) {
@@ -210,8 +462,8 @@ void MeasureGUI_CheckSelfIntersectionsDlg::onErrorsListSelectionChanged()
     if (!aType.isEmpty())
       aSubShapeList.append(QString("%1_%2").arg(aType).arg(myInters[aCurItem*2 + 1]));
   }
-  myGrp->ListBox2->clear();
+  myShapeList->clear();
-  myGrp->ListBox2->addItems(aSubShapeList);
+  myShapeList->addItems(aSubShapeList);
 }
 
 //=================================================================================
@@ -223,14 +475,14 @@ void MeasureGUI_CheckSelfIntersectionsDlg::onSubShapesListSelectionChanged()
   erasePreview();
 
   // Current pair
-  int aErrCurItem = myGrp->ListBox1->currentRow();
+  int aErrCurItem = myInteList->currentRow();
   if (aErrCurItem < 0)
     return;
 
   // Selected IDs
   QList<int> aIds;
-  for (int i = 0, n = myGrp->ListBox2->count(); i < n; i++) {
+  for (int i = 0, n = myShapeList->count(); i < n; i++) {
-    if (myGrp->ListBox2->item(i)->isSelected())
+    if (myShapeList->item(i)->isSelected())
       aIds.append(i);
   }
   if (aIds.count() < 1)
@@ -259,3 +511,82 @@ void MeasureGUI_CheckSelfIntersectionsDlg::onSubShapesListSelectionChanged()
     }
   }
 }
+
+//=================================================================================
+// function : execute
+// purpose  :
+//=================================================================================
+bool MeasureGUI_CheckSelfIntersectionsDlg::execute(ObjectList& objects)
+{
+  bool hasSelfInte;
+  QString anErrMsg;
+
+  if (!findSelfIntersections(hasSelfInte, anErrMsg)) {
+    return false;
+  }
+
+  const int  aNbInteSelected    = myInteList->selectedItems().size();
+  const bool isPublishAllInte   = (aNbInteSelected < 1);
+  const bool isPublishAllShapes =
+    (aNbInteSelected != 1 || myShapeList->selectedItems().empty());
+  int        i;
+  const int  n = myInteList->count();
+  TColStd_IndexedMapOfInteger aMapIndex;
+
+  // Collect the map of indices.
+  for (i = 0; i < n; i++) {
+    if (isPublishAllInte) {
+      // Collect the both of two indices.
+      aMapIndex.Add(myInters[i*2]);
+      aMapIndex.Add(myInters[i*2 + 1]);
+    } else if (myInteList->item(i)->isSelected()) {
+      if (isPublishAllShapes) {
+        // Collect the both of two indices.
+        aMapIndex.Add(myInters[i*2]);
+        aMapIndex.Add(myInters[i*2 + 1]);
+      } else if (myShapeList->count() == 2) {
+        // Collect only selected items.
+        if (myShapeList->item(0)->isSelected()) {
+          aMapIndex.Add(myInters[i*2]);
+        }
+        if (myShapeList->item(1)->isSelected()) {
+          aMapIndex.Add(myInters[i*2 + 1]);
+        }
+      }
+    }
+  }
+
+  // Create objects.
+  GEOM::ListOfLong_var anArray   = new GEOM::ListOfLong;
+  const int            aNbShapes = aMapIndex.Extent();
+
+  anArray->length(aNbShapes);
+
+  for (i = 1; i <= aNbShapes; i++) {
+    anArray[i - 1] = aMapIndex.FindKey(i);
+  }
+
+  if (myShapesOper->_is_nil()) {
+    myShapesOper = getGeomEngine()->GetIShapesOperations(getStudyId());
+  }
+
+  GEOM::ListOfGO_var aList = myShapesOper->MakeSubShapes(myObj, anArray);
+  const int aNbObj = aList->length();
+
+  for (i = 0; i < aNbObj; i++) {
+    objects.push_back(GEOM::GEOM_Object::_duplicate(aList[i]));
+  }
+
+  return true;
+}
+
+//================================================================
+// Function : getFather
+// Purpose  : Get father object for object to be added in study
+//            (called with addInStudy method)
+//================================================================
+GEOM::GEOM_Object_ptr MeasureGUI_CheckSelfIntersectionsDlg::getFather
+                  (GEOM::GEOM_Object_ptr)
+{
+  return myObj;
+}

src/MeasureGUI/MeasureGUI_CheckSelfIntersectionsDlg.h

@@ -26,38 +26,70 @@
 #ifndef MEASUREGUI_CHECKSELFINTERDLG_H
 #define MEASUREGUI_CHECKSELFINTERDLG_H
 
-#include <MeasureGUI_Skeleton.h>
+#include <GEOMBase_Skeleton.h>
+
+class QComboBox;
+class QListWidget;
+class QTextBrowser;
 
-class MeasureGUI_1Sel1TextView2ListBox;
 
 //=================================================================================
 // class    : MeasureGUI_CheckSelfIntersectionsDlg
 // purpose  :
 //=================================================================================
 
-class MeasureGUI_CheckSelfIntersectionsDlg : public MeasureGUI_Skeleton
+class MeasureGUI_CheckSelfIntersectionsDlg : public GEOMBase_Skeleton
 {
   Q_OBJECT
 
 public:
+
   MeasureGUI_CheckSelfIntersectionsDlg(GeometryGUI*, QWidget*);
   ~MeasureGUI_CheckSelfIntersectionsDlg();
 
 protected:
-  // redefined from GEOMBase_Helper and MeasureGUI_Skeleton
+  // redefined from GEOMBase_Helper
-  virtual void                        processObject();
+  virtual GEOM::GEOM_IOperations_ptr  createOperation();
+  virtual bool                        isValid(QString &);
+  virtual bool                        execute(ObjectList &);
+  virtual bool                        extractPrefix() const;
+  virtual GEOM::GEOM_Object_ptr       getFather (GEOM::GEOM_Object_ptr);
 
 private slots:
-  void                                onErrorsListSelectionChanged();
+
+  void                                onInteListSelectionChanged();
   void                                onSubShapesListSelectionChanged();
+  void                                clear();
+  void                                onCompute();
+  void                                ClickOnOk();
+  bool                                ClickOnApply();
+  void                                ActivateThisDialog();
+  void                                DeactivateActiveDialog();
+  void                                SelectionIntoArgument();
+  void                                SetEditCurrentArgument();
 
 private:
+
   void                                Init();
+  void                                activateSelection();
+  void                                enterEvent(QEvent *);
+  bool                                findSelfIntersections
+                                                    (bool    &HasSelfInte,
+                                                     QString &theErrMsg);
 
 private:
-  MeasureGUI_1Sel1TextView2ListBox*   myGrp;
 
+  QTextBrowser                       *myTextView;
+  QPushButton                        *mySelButton;
+  QLineEdit                          *myEditObjName;
+  QComboBox                          *myLevelBox;
+  QPushButton                        *myComputeButton;
+  QListWidget                        *myInteList;
+  QListWidget                        *myShapeList;
+  GEOM::GEOM_Object_var               myObj;
   GEOM::ListOfLong_var                myInters;
+  GEOM::GEOM_IShapesOperations_var    myShapesOper;
+
 };
 
 #endif // MEASUREGUI_CHECKSELFINTERDLG_H