Merge branch 'master' into rnc/t_shape_plugin

CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -30,8 +30,8 @@ CMAKE_POLICY(SET CMP0003 NEW)
 STRING(TOUPPER ${PROJECT_NAME} PROJECT_NAME_UC)
 
 SET(${PROJECT_NAME_UC}_MAJOR_VERSION 7)
-SET(${PROJECT_NAME_UC}_MINOR_VERSION 4)
+SET(${PROJECT_NAME_UC}_MINOR_VERSION 7)
-SET(${PROJECT_NAME_UC}_PATCH_VERSION 1)
+SET(${PROJECT_NAME_UC}_PATCH_VERSION 0)
 SET(${PROJECT_NAME_UC}_VERSION
   ${${PROJECT_NAME_UC}_MAJOR_VERSION}.${${PROJECT_NAME_UC}_MINOR_VERSION}.${${PROJECT_NAME_UC}_PATCH_VERSION})
 SET(${PROJECT_NAME_UC}_VERSION_DEV 1)
@@ -108,7 +108,9 @@ IF(SALOME_BUILD_GUI)
   IF(EXISTS ${GUI_ROOT_DIR})
     LIST(APPEND CMAKE_MODULE_PATH "${GUI_ROOT_DIR}/adm_local/cmake_files")
     FIND_PACKAGE(SalomeGUI)
-    FULL_GUI(TRUE) #check whether GUI builded in full mode and with CORBA
+    SALOME_GUI_WITH_CORBA() #check whether GUI builded with CORBA
+    SALOME_GUI_MODE(SALOME_USE_OCCVIEWER SALOME_USE_VTKVIEWER SALOME_USE_SALOMEOBJECT 
+                    OPTIONAL SALOME_USE_PLOT2DVIEWER SALOME_USE_GRAPHICSVIEW SALOME_USE_PYCONSOLE)
     ADD_DEFINITIONS(${GUI_DEFINITIONS})
     INCLUDE_DIRECTORIES(${GUI_INCLUDE_DIRS})
   ELSE(EXISTS ${GUI_ROOT_DIR})
@@ -125,12 +127,6 @@ IF(SALOME_BUILD_GUI)
 
   # Qt4
   FIND_PACKAGE(SalomeQt4 REQUIRED COMPONENTS QtCore QtGui QtXml)
-
-  # Optional prerequisites for GUI
-  IF(SALOME_USE_GLVIEWER)
-    FIND_PACKAGE(SalomeOpenGL)
-    SALOME_LOG_OPTIONAL_PACKAGE(OpenGL SALOME_USE_GLVIEWER) 
-  ENDIF() 
 ENDIF(SALOME_BUILD_GUI)
 
 ##
@@ -231,9 +227,12 @@ IF(SALOME_BUILD_GUI)
   LIST(APPEND _${PROJECT_NAME}_exposed_targets 
     AdvancedGUI BasicGUI BlocksGUI BooleanGUI BuildGUI DisplayGUI DlgRef CurveCreator EntityGUI GEOMBase
     GEOMFiltersSelection GEOM GEOMToolsGUI GenerationGUI GroupGUI Material MeasureGUI GEOMObject
-    OperationGUI PrimitiveGUI RepairGUI TransformationGUI DependencyTree
+    OperationGUI PrimitiveGUI RepairGUI TransformationGUI
     STLPluginGUI BREPPluginGUI STEPPluginGUI IGESPluginGUI XAOPluginGUI VTKPluginGUI
     )
+  IF(SALOME_USE_GRAPHICSVIEW)
+    LIST(APPEND _${PROJECT_NAME}_exposed_targets DependencyTree)
+  ENDIF(SALOME_USE_GRAPHICSVIEW)
 ENDIF(SALOME_BUILD_GUI)
 
 IF(SALOME_GEOM_USE_OPENCV)

GEOM_version.h.in

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

SalomeGEOMConfig.cmake.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/cmake_files/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindGEOM.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomeGEOM.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomeOpenCV.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -23,7 +23,14 @@
 #
 #  !! Please read the generic detection procedure in SalomeMacros.cmake !!
 #
-SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS(OpenCV OpenCV_DIR 2)
+SET(UpCount 2)
+
+IF (WIN32)
+  SET(UpCount 0)
+ENDIF (WIN32)
+
+SALOME_FIND_PACKAGE_AND_DETECT_CONFLICTS(OpenCV OpenCV_DIR ${UpCount})
+
 #MARK_AS_ADVANCED()
 
 IF(OpenCV_FOUND) 

adm_local/unix/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/unix/config_files/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_GEOM.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_GUI.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl This library is free software; you can redistribute it and/or
 dnl modify it under the terms of the GNU Lesser General Public

adm_local/unix/config_files/check_OpenCV.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl This library is free software; you can redistribute it and/or
 dnl modify it under the terms of the GNU Lesser General Public

bin/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

bin/addvars2notebook_GEOM.py

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

bin/geom_setenv.py

@@ -1,6 +1,6 @@
 #! /usr/bin/env python
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -20,7 +20,7 @@
 #
 
 import os, sys, string
-from salome_utils import getTmpDir, generateFileName, uniteFiles
+from salome_utils import getLogDir, generateFileName, uniteFiles
 from setenv import add_path, get_lib_dir, salome_subdir
 
 # -----------------------------------------------------------------------------
@@ -29,8 +29,8 @@ def set_env( args ):
     """Add to the PATH-variables modules specific paths"""
     psep = os.pathsep
     python_version="python%d.%d" % sys.version_info[0:2]
-    
+
-    tmp_dir = getTmpDir()
+    tmp_dir = getLogDir()
     env_dir = generateFileName( tmp_dir, prefix="env", with_port=True )
     res_dir = os.path.join( os.getenv( "GEOM_ROOT_DIR" ), "share", salome_subdir, "resources", "geom" )
 

doc/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/examples/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -18,114 +18,125 @@
 #
 
 SET(BAD_TESTS
-  repairing_operations_ex09.py 
+  repairing_operations_ex09.py
 )
 
 SET(GOOD_TESTS
-  3dsketcher.py  
+  3dsketcher.py
-  advanced_geom_objs_ex01.py  
+  advanced_geom_objs_ex01.py
-  advanced_geom_objs_ex02.py  
+  advanced_geom_objs_ex02.py
-  advanced_geom_objs_ex03.py  
+  advanced_geom_objs_ex03.py
-  angle.py  
+  angle.py
-  arranging_study_objects.py  
+  arranging_study_objects.py
-  basic_geom_objs_ex01.py  
+  basic_geom_objs_ex01.py
-  basic_geom_objs_ex02.py  
+  basic_geom_objs_ex02.py
-  basic_geom_objs_ex03.py  
+  basic_geom_objs_ex03.py
-  basic_geom_objs_ex04.py  
+  basic_geom_objs_ex04.py
-  basic_geom_objs_ex05.py  
+  basic_geom_objs_ex05.py
-  basic_geom_objs_ex06.py  
+  basic_geom_objs_ex06.py
-  basic_geom_objs_ex07.py  
+  basic_geom_objs_ex07.py
-  basic_geom_objs_ex08.py  
+  basic_geom_objs_ex08.py
-  basic_geom_objs_ex09.py  
+  basic_geom_objs_ex09.py
-  basic_operations_ex01.py  
+  basic_geom_objs_ex10.py
-  basic_operations_ex02.py  
+  basic_operations_ex01.py
-  basic_operations_ex03.py  
+  basic_operations_ex02.py
-  basic_properties.py  
+  basic_operations_ex03.py
-  blocks_operations_ex01.py  
+  basic_operations_ex04.py
-  blocks_operations_ex02.py  
+  basic_properties.py
-  blocks_operations_ex03.py  
+  blocks_operations_ex01.py
-  boolean_operations_ex01.py  
+  blocks_operations_ex02.py
-  boolean_operations_ex02.py  
+  blocks_operations_ex03.py
-  boolean_operations_ex03.py  
+  boolean_operations_ex01.py
-  boolean_operations_ex04.py  
+  boolean_operations_ex02.py
-  bounding_box.py  
+  boolean_operations_ex03.py
-  building_by_blocks_ex01.py  
+  boolean_operations_ex04.py
-  building_by_blocks_ex02.py  
+  bounding_box.py
-  center_of_mass.py  
+  building_by_blocks_ex01.py
-  check_compound_of_blocks.py  
+  building_by_blocks_ex02.py
-  check_self_intersections.py  
+  center_of_mass.py
-  check_shape.py  
+  check_compound_of_blocks.py
-  complex_objs_ex01.py  
+  check_self_intersections.py
-  complex_objs_ex02.py  
+  check_shape.py
-  complex_objs_ex03.py  
+  complex_objs_ex01.py
-  complex_objs_ex04.py  
+  complex_objs_ex02.py
-  complex_objs_ex05.py  
+  complex_objs_ex03.py
-  complex_objs_ex06.py  
+  complex_objs_ex04.py
-  complex_objs_ex07.py  
+  complex_objs_ex05.py
-  complex_objs_ex08.py  
+  complex_objs_ex06.py
-  complex_objs_ex09.py  
+  complex_objs_ex07.py
-  complex_objs_ex10.py  
+  complex_objs_ex08.py
-  free_boundaries.py  
+  complex_objs_ex09.py
-  free_faces.py  
+  complex_objs_ex10.py
-  GEOM_box.py  
+  complex_objs_ex11.py
-  get_non_blocks.py  
+  fast_intersection.py
-  import_export.py  
+  free_boundaries.py
-  inertia.py  
+  free_faces.py
-  min_distance.py  
+  GEOM_box.py
-  normal_face.py  
+  get_non_blocks.py
-  notebook_geom.py  
+  import_export.py
-  point_coordinates.py  
+  inertia.py
-  primitives_ex01.py  
+  min_distance.py
-  primitives_ex02.py  
+  normal_face.py
-  primitives_ex03.py  
+  notebook_geom.py
-  primitives_ex04.py  
+  polyline.py
-  primitives_ex05.py  
+  point_coordinates.py
-  primitives_ex06.py  
+  primitives_ex01.py
-  primitives_ex07.py  
+  primitives_ex02.py
-  repairing_operations_ex01.py  
+  primitives_ex03.py
-  repairing_operations_ex02.py  
+  primitives_ex04.py
-  repairing_operations_ex03.py  
+  primitives_ex05.py
-  repairing_operations_ex04.py  
+  primitives_ex06.py
-  repairing_operations_ex05.py  
+  primitives_ex07.py
-  repairing_operations_ex06.py  
+  repairing_operations_ex01.py
-  repairing_operations_ex07.py  
+  repairing_operations_ex02.py
-  repairing_operations_ex08.py  
+  repairing_operations_ex03.py
-  repairing_operations_ex10.py  
+  repairing_operations_ex04.py
-  repairing_operations_ex11.py  
+  repairing_operations_ex05.py
-  repairing_operations_ex12.py  
+  repairing_operations_ex06.py
-  sketcher.py  
+  repairing_operations_ex07.py
-  tolerance.py  
+  repairing_operations_ex08.py
-  topological_geom_objs_ex01.py  
+  repairing_operations_ex10.py
-  topological_geom_objs_ex02.py  
+  repairing_operations_ex11.py
-  topological_geom_objs_ex03.py  
+  repairing_operations_ex12.py
-  topological_geom_objs_ex04.py  
+  sketcher.py
-  topological_geom_objs_ex05.py  
+  tolerance.py
-  topological_geom_objs_ex06.py  
+  topological_geom_objs_ex01.py
-  transformation_operations_ex01.py  
+  topological_geom_objs_ex02.py
-  transformation_operations_ex02.py  
+  topological_geom_objs_ex03.py
-  transformation_operations_ex03.py  
+  topological_geom_objs_ex04.py
-  transformation_operations_ex04.py  
+  topological_geom_objs_ex05.py
-  transformation_operations_ex05.py  
+  topological_geom_objs_ex06.py
-  transformation_operations_ex06.py  
+  transformation_operations_ex01.py
-  transformation_operations_ex07.py  
+  transformation_operations_ex02.py
-  transformation_operations_ex08.py  
+  transformation_operations_ex03.py
-  transformation_operations_ex09.py  
+  transformation_operations_ex04.py
-  transformation_operations_ex10.py  
+  transformation_operations_ex05.py
-  transformation_operations_ex11.py  
+  transformation_operations_ex06.py
-  transformation_operations_ex12.py  
+  transformation_operations_ex07.py
-  transformation_operations_ex13.py  
+  transformation_operations_ex08.py
-  viewing_geom_objs_ex01.py  
+  transformation_operations_ex09.py
-  viewing_geom_objs_ex02.py  
+  transformation_operations_ex10.py
-  viewing_geom_objs_ex03.py  
+  transformation_operations_ex11.py
-  viewing_geom_objs_ex04.py  
+  transformation_operations_ex12.py
-  whatis.py  
+  transformation_operations_ex13.py
-  working_with_groups_ex01.py  
+  transformation_operations_ex14.py
-  working_with_groups_ex02.py  
+  viewing_geom_objs_ex01.py
-  working_with_groups_ex03.py  
+  viewing_geom_objs_ex02.py
-  working_with_groups_ex04.py  
+  viewing_geom_objs_ex03.py
-  working_with_groups_ex05.py  
+  viewing_geom_objs_ex04.py
+  whatis.py
+  working_with_groups_ex01.py
+  working_with_groups_ex02.py
+  working_with_groups_ex03.py
+  working_with_groups_ex04.py
+  working_with_groups_ex05.py
   working_with_groups_ex06.py
 )
+IF(CAS_VERSION_STR VERSION_GREATER "6.9.0")
+  LIST(APPEND GOOD_TESTS
+    check_self_intersections_fast.py
+  )
+ENDIF()
 
 SET(EXAMPLES_TESTS ${BAD_TESTS} ${GOOD_TESTS} testme.py)
 
@@ -133,10 +144,19 @@ SALOME_GENERATE_TESTS_ENVIRONMENT(tests_env)
 
 FOREACH(test ${GOOD_TESTS})
   GET_FILENAME_COMPONENT(testname ${test} NAME_WE)
-  ADD_TEST(NAME ${testname} 
+  ADD_TEST(NAME ${testname}
            COMMAND ${PYTHON_EXECUTABLE} -B ${CMAKE_SOURCE_DIR}/doc/salome/examples/testme.py ${CMAKE_CURRENT_SOURCE_DIR}/${test})
-  SET_TESTS_PROPERTIES(${testname} PROPERTIES ENVIRONMENT "${tests_env}")                   
+  SET_TESTS_PROPERTIES(${testname} PROPERTIES ENVIRONMENT "${tests_env}")
 ENDFOREACH()
 
 # install Python scripts
 SALOME_INSTALL_SCRIPTS("${EXAMPLES_TESTS}" ${SALOME_INSTALL_DOC}/examples/GEOM)
+
+# Application tests
+
+SET(TEST_INSTALL_DIRECTORY ${SALOME_INSTALL_SCRIPT_SCRIPTS}/test)
+INSTALL(FILES ${GOOD_TESTS} DESTINATION ${TEST_INSTALL_DIRECTORY})
+
+INSTALL(FILES CTestTestfileInstall.cmake
+        DESTINATION ${TEST_INSTALL_DIRECTORY}
+        RENAME CTestTestfile.cmake)

doc/salome/examples/CTestTestfileInstall.cmake

@@ -0,0 +1,141 @@
+# Copyright (C) 2015  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
+SET(SALOME_TEST_DRIVER "$ENV{ABSOLUTE_APPLI_PATH}/bin/salome/appliskel/salome_test_driver.py")
+SET(COMPONENT_NAME GEOM)
+SET(TIMEOUT        300)
+
+SET(GOOD_TESTS
+  3dsketcher
+  advanced_geom_objs_ex01
+  advanced_geom_objs_ex02
+  advanced_geom_objs_ex03
+  angle
+  arranging_study_objects
+  basic_geom_objs_ex01
+  basic_geom_objs_ex02
+  basic_geom_objs_ex03
+  basic_geom_objs_ex04
+  basic_geom_objs_ex05
+  basic_geom_objs_ex06
+  basic_geom_objs_ex07
+  basic_geom_objs_ex08
+  basic_geom_objs_ex09
+  basic_geom_objs_ex10
+  basic_operations_ex01
+  basic_operations_ex02
+  basic_operations_ex03
+  basic_operations_ex04
+  basic_properties
+  blocks_operations_ex01
+  blocks_operations_ex02
+  blocks_operations_ex03
+  boolean_operations_ex01
+  boolean_operations_ex02
+  boolean_operations_ex03
+  boolean_operations_ex04
+  bounding_box
+  building_by_blocks_ex01
+  building_by_blocks_ex02
+  center_of_mass
+  check_compound_of_blocks
+  check_self_intersections
+  check_shape
+  complex_objs_ex01
+  complex_objs_ex02
+  complex_objs_ex03
+  complex_objs_ex04
+  complex_objs_ex05
+  complex_objs_ex06
+  complex_objs_ex07
+  complex_objs_ex08
+  complex_objs_ex09
+  complex_objs_ex10
+  complex_objs_ex11
+  free_boundaries
+  free_faces
+  GEOM_box
+  get_non_blocks
+  import_export
+  inertia
+  min_distance
+  normal_face
+  notebook_geom
+  polyline
+  point_coordinates
+  primitives_ex01
+  primitives_ex02
+  primitives_ex03
+  primitives_ex04
+  primitives_ex05
+  primitives_ex06
+  primitives_ex07
+  repairing_operations_ex01
+  repairing_operations_ex02
+  repairing_operations_ex03
+  repairing_operations_ex04
+  repairing_operations_ex05
+  repairing_operations_ex06
+  repairing_operations_ex07
+  repairing_operations_ex08
+  repairing_operations_ex10
+  repairing_operations_ex11
+  repairing_operations_ex12
+  sketcher
+  tolerance
+  topological_geom_objs_ex01
+  topological_geom_objs_ex02
+  topological_geom_objs_ex03
+  topological_geom_objs_ex04
+  topological_geom_objs_ex05
+  topological_geom_objs_ex06
+  transformation_operations_ex01
+  transformation_operations_ex02
+  transformation_operations_ex03
+  transformation_operations_ex04
+  transformation_operations_ex05
+  transformation_operations_ex06
+  transformation_operations_ex07
+  transformation_operations_ex08
+  transformation_operations_ex09
+  transformation_operations_ex10
+  transformation_operations_ex11
+  transformation_operations_ex12
+  transformation_operations_ex13
+  transformation_operations_ex14
+  viewing_geom_objs_ex01
+  viewing_geom_objs_ex02
+  viewing_geom_objs_ex03
+  viewing_geom_objs_ex04
+  whatis
+  working_with_groups_ex01
+  working_with_groups_ex02
+  working_with_groups_ex03
+  working_with_groups_ex04
+  working_with_groups_ex05
+  working_with_groups_ex06
+)
+# CAS_VERSION > "6.8.0"
+LIST(APPEND GOOD_TESTS fast_intersection)
+
+FOREACH(tfile ${GOOD_TESTS})
+  SET(TEST_NAME GEOM_${tfile})
+  ADD_TEST(${TEST_NAME} python ${SALOME_TEST_DRIVER} ${TIMEOUT} ${tfile}.py)
+  SET_TESTS_PROPERTIES(${TEST_NAME} PROPERTIES LABELS "${COMPONENT_NAME}")
+ENDFOREACH()

doc/salome/examples/basic_geom_objs_ex10.py

@@ -0,0 +1,37 @@
+# Creation of a Surface From Face
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+import math
+import SALOMEDS
+
+# Create Vertices, Edges, Wire, Face and Disk
+Vertex_1 = geompy.MakeVertex(0,    0, 0)
+Vertex_2 = geompy.MakeVertex(100,  0, 0)
+Vertex_3 = geompy.MakeVertex(50, 100, 0)
+Edge_1   = geompy.MakeEdge(Vertex_1, Vertex_2)
+Edge_2   = geompy.MakeEdge(Vertex_2, Vertex_3)
+Edge_3   = geompy.MakeEdge(Vertex_3, Vertex_1)
+Wire_1   = geompy.MakeWire([Edge_1, Edge_2, Edge_3])
+Face_1   = geompy.MakeFace(Wire_1, True)
+Disk_1   = geompy.MakeDiskR(100, 1)
+
+# Create Surfaces From Faces.
+SurfaceFromFace_1 = geompy.MakeSurfaceFromFace(Face_1)
+SurfaceFromFace_2 = geompy.MakeSurfaceFromFace(Disk_1)
+
+#Add created object to study
+geompy.addToStudy( Vertex_1,          "Vertex_1" )
+geompy.addToStudy( Vertex_2,          "Vertex_2" )
+geompy.addToStudy( Vertex_3,          "Vertex_3" )
+geompy.addToStudy( Edge_1,            "Edge_1" )
+geompy.addToStudy( Edge_2,            "Edge_2" )
+geompy.addToStudy( Edge_3,            "Edge_3" )
+geompy.addToStudy( Wire_1,            "Wire_1" )
+geompy.addToStudy( Face_1,            "Face_1" )
+geompy.addToStudy( Disk_1,            "Disk_1" )
+geompy.addToStudy( SurfaceFromFace_1, "SurfaceFromFace_1" )
+geompy.addToStudy( SurfaceFromFace_2, "SurfaceFromFace_2" )

doc/salome/examples/basic_operations_ex01.py

@@ -22,23 +22,17 @@ box = geompy.MakeBoxTwoPnt(p0, p200)
 trimsize  = 500.
 plane = geompy.MakePlane(pz, vxyz, trimsize)
 
-# create partition objects
+# create partition
-partition1 = geompy.MakePartition([box], [plane])
+partition = geompy.MakePartition([box], [plane])
-partition2 = geompy.Partition([box], [plane])
-partition3 = geompy.MakeHalfPartition(box, plane)
 
 # add objects in the study
 id_box = geompy.addToStudy(box,"Box")
 id_plane = geompy.addToStudy(plane,"Plane")
-id_partition1 = geompy.addToStudy(partition1,"MakePartition")
+id_partition = geompy.addToStudy(partition,"Partition")
-id_partition2 = geompy.addToStudy(partition2,"Partition")
-id_partition3 = geompy.addToStudy(partition3,"MakeHalfPartition")
 
 # display the partition objects and the plane
 gg.createAndDisplayGO(id_box)
 gg.setDisplayMode(id_box,1)
 gg.createAndDisplayGO(id_plane)
 gg.setDisplayMode(id_plane,1)
-gg.createAndDisplayGO(id_partition1)
+gg.createAndDisplayGO(id_partition)
-gg.createAndDisplayGO(id_partition2)
-gg.createAndDisplayGO(id_partition3)

doc/salome/examples/basic_operations_ex04.py

@@ -0,0 +1,40 @@
+# Get shared sub-shapes
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+import SALOMEDS
+
+# create a box and partigion it by two planes
+box = geompy.MakeBoxDXDYDZ(200, 200, 200)
+p = geompy.MakeVertex(100, 100, 100)
+v1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
+v2 = geompy.MakeVectorDXDYDZ(1, -1, 0)
+pln1 = geompy.MakePlane(p, v1, 2000)
+pln2 = geompy.MakePlane(p, v2, 2000)
+partition = geompy.MakePartition([box], [pln1, pln2])
+
+# extract solids from result of partition
+solids = geompy.SubShapeAllSorted(partition, geompy.ShapeType['SOLID'])
+
+# get shared shapes from the partition (compound of 4 solids)
+# a) faces that are shared by all 4 solids (0 found)
+pF_T = geompy.GetSharedShapesMulti(partition, geompy.ShapeType['FACE'])
+# b) faces that are shared by any couple of solids (4 found)
+pF_F = geompy.GetSharedShapesMulti(partition, geompy.ShapeType['FACE'], False)
+# c) edges that are shared by all 4 solids (1 found)
+pE_T = geompy.GetSharedShapesMulti(partition, geompy.ShapeType['EDGE'])
+# d) edges that are shared by any couple of solids (13 found)
+pE_F = geompy.GetSharedShapesMulti(partition, geompy.ShapeType['EDGE'], False)
+
+# get shared shapes from the list of solids
+# a) faces that are shared by all 4 solids (0 found)
+sF_T = geompy.GetSharedShapesMulti(solids, geompy.ShapeType['FACE'])
+# b) faces that are shared by 1st/2nd, 1st/3rd and 1st/4th solids (2 found)
+sF_F = geompy.GetSharedShapesMulti(solids, geompy.ShapeType['FACE'], False)
+# c) edges that are shared by all 4 solids (1 found)
+sE_T = geompy.GetSharedShapesMulti(solids, geompy.ShapeType['EDGE'])
+# d) edges that are shared by 1st/2nd, 1st/3rd and 1st/4th solids (7 found)
+sE_F = geompy.GetSharedShapesMulti(solids, geompy.ShapeType['EDGE'], False)

doc/salome/examples/check_self_intersections.py

@@ -7,9 +7,15 @@ from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
 
 # create a box
-box = geompy.MakeBoxDXDYDZ(100,30,100)
+box = geompy.MakeBoxDXDYDZ(100,100,100)
-IsValid = geompy.CheckSelfIntersections(box)
+# create a cylinder
-if IsValid == 0:
+cylinder = geompy.MakeCylinderRH(100, 300)
-    raise RuntimeError, "Box with self-intersections created"
+# make a compound
+compound = geompy.MakeCompound([box, cylinder])
+
+# check self-intersection
+IsValid = geompy.CheckSelfIntersections(compound)
+if not IsValid:
+    print "Shape is self-intersected!"
 else:
-    print "\nBox is valid"
+    print "No self-intersection detected in a shape"

doc/salome/examples/check_self_intersections_fast.py

@@ -0,0 +1,21 @@
+# Detect Self-intersections fast
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+
+# create a box
+box = geompy.MakeBoxDXDYDZ(100,100,100)
+# create a cylinder
+cylinder = geompy.MakeCylinderRH(100, 300)
+# make a compound
+compound = geompy.MakeCompound([box, cylinder])
+
+# check self-intersection
+IsValid = geompy.CheckSelfIntersectionsFast(compound)
+if not IsValid:
+    print "Shape is self-intersected!"
+else:
+    print "No self-intersection detected in a shape"

doc/salome/examples/check_shape.py

@@ -10,7 +10,7 @@ geompy = geomBuilder.New(salome.myStudy)
 box = geompy.MakeBoxDXDYDZ(100,30,100)
 (IsValid, err) = geompy.CheckShape(box, 0, 2)
 if IsValid == 0:
-    geompy.PrintShapeError(box, err)
+    geompy.PrintShapeErrors(box, err)
     raise RuntimeError, "Invalid box created"
 else:
     print "\nBox is valid"

doc/salome/examples/complex_objs_ex03.py

@@ -20,14 +20,12 @@ p3 = geompy.MakeVertex(  -30.,  -30.,  10.)
 
 # create an arc from three points
 arc = geompy.MakeArc(p1, p2, p3)
-ShapeListCompound = []
+ContoursList = []
-i = 0
+for i in range(4):
-while i <= 3 :
     S = geompy.MakeTranslation(arc, i * 50., 0., 0.)
-    ShapeListCompound.append(S)
+    ContoursList.append(S)
-    i = i + 1
 
-compound = geompy.MakeCompound(ShapeListCompound)
+compound = geompy.MakeCompound(ContoursList)
 
 # create a filling
 filling = geompy.MakeFilling(compound, mindeg, maxdeg, tol3d, tol2d, nbiter)

doc/salome/examples/complex_objs_ex05.py

@@ -18,18 +18,22 @@ circles.append(geompy.MakeCircle(vertices[1], edges[0], 40))
 circles.append(geompy.MakeCircle(vertices[2], edges[2], 30))
 circles.append(geompy.MakeCircle(vertices[3], edges[2], 20))
 
-# create pipe
+# create pipes
-Pipe = geompy.MakePipeWithDifferentSections(circles, vertices, Wire_1, 0, 0)
+Pipe1 = geompy.MakePipeWithDifferentSections(circles, vertices, Wire_1, 0, 0)
+Pipe2 = geompy.MakePipeWithDifferentSectionsBySteps(circles, vertices, Wire_1)
 
 # add objects in the study
 geompy.addToStudy(circles[0], "circles1")
 geompy.addToStudy(circles[1], "circles2")
 geompy.addToStudy(circles[2], "circles3")
 geompy.addToStudy(circles[3], "circles4")
-id_wire = geompy.addToStudy(Wire_1, "Path")
+id_wire  = geompy.addToStudy(Wire_1, "Path")
-id_pipe = geompy.addToStudy(Pipe, "Pipe")
+id_pipe1 = geompy.addToStudy(Pipe1, "Pipe1")
+id_pipe2 = geompy.addToStudy(Pipe2, "Pipe2")
 
 # display the wire(path) and the pipe
 gg.createAndDisplayGO(id_wire)
-gg.createAndDisplayGO(id_pipe)
+gg.createAndDisplayGO(id_pipe1)
-gg.setDisplayMode(id_pipe,1) 
+gg.createAndDisplayGO(id_pipe2)
+gg.setDisplayMode(id_pipe1,1)
+gg.setDisplayMode(id_pipe2,1)

doc/salome/examples/complex_objs_ex11.py

@@ -0,0 +1,39 @@
+# Apply thickness for shell
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+gg = salome.ImportComponentGUI("GEOM")
+
+# create box
+box = geompy.MakeBoxDXDYDZ(100, 100, 100)
+
+# get the list of faces
+faces = geompy.SubShapeAllSortedCentres(box, geompy.ShapeType["FACE"])
+
+# get the list of face IDs
+faceIDs = geompy.SubShapeAllSortedCentresIDs(box, geompy.ShapeType["FACE"])
+
+# make a shell from 3 faces
+shell = geompy.MakeShell([faces[0], faces[1], faces[2]])
+
+# apply thickness
+solid = geompy.MakeThickSolid(shell, 30.)
+
+# create box
+hsolid = geompy.MakeBoxDXDYDZ(100, 100, 100)
+
+# make hollowed solid
+geompy.Thicken(hsolid, 30., [faceIDs[0], faceIDs[1]])
+
+# add objects in the study
+id_shell  = geompy.addToStudy(shell, "Shell")
+id_solid  = geompy.addToStudy(solid, "Solid")
+id_hsolid = geompy.addToStudy(hsolid, "Hollowed Solid")
+
+# display the shell and the result thicknen solid and hollowed solid
+gg.createAndDisplayGO(id_shell)
+gg.createAndDisplayGO(id_solid)
+gg.createAndDisplayGO(id_hsolid)

doc/salome/examples/fast_intersection.py

@@ -0,0 +1,34 @@
+# Fast intersection
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+
+# create a box
+box = geompy.MakeBoxDXDYDZ(100,100,100)
+# create a cylinder
+cylinder = geompy.MakeCylinderRH(100, 300)
+
+isOk, res1, res2 = geompy.FastIntersect(box, cylinder)
+if isOk == 0:
+    raise RuntimeError, "No intersection!"
+else:
+    print "\nTwo lists of indexes of sub-shapes localize the intersection:"
+    print res1, res2
+
+# create two boxes with gap
+Ver1 = geompy.MakeVertex(0, 0, 0)
+Ver2 = geompy.MakeVertex(100, 100, 100)
+Ver3 = geompy.MakeVertex(100.1, 0, 0)
+Ver4 = geompy.MakeVertex(200, 200, 200)
+box1 = geompy.MakeBoxTwoPnt(Ver1, Ver2)
+box2 = geompy.MakeBoxTwoPnt(Ver3, Ver4)
+
+isOk1, aRes1, aRes2 = geompy.FastIntersect(box1, box2, 1.)
+if isOk1 == 0:
+    raise RuntimeError, "No gaps!"
+else:
+    print "\nTwo lists of indexes of sub-shapes localize the gap:"
+    print aRes1, aRes2

doc/salome/examples/repairing_operations_ex06.py

@@ -1,27 +1,26 @@
 # Sewing
 
-import salome
+import salome, math
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
+
 geompy = geomBuilder.New(salome.myStudy)
-import math
+gg     = salome.ImportComponentGUI("GEOM")
-gg = salome.ImportComponentGUI("GEOM")
 
 # create base points
 px = geompy.MakeVertex(100., 0., 0.)
 py = geompy.MakeVertex(0., 100., 0.)
 pz = geompy.MakeVertex(0., 0., 100.)
 
-# create base geometry 2D & 3D
+# create base geometry 2D
 vector = geompy.MakeVector(px, py)
-arc = geompy.MakeArc(py, pz, px)
+arc    = geompy.MakeArc(py, pz, px)
 
 # create base objects
 angle = 45. * math.pi / 180
-WantPlanarFace = 1 #True
+WantPlanarFace = True
-wire = geompy.MakeWire([vector, arc])
+wire     = geompy.MakeWire([vector, arc])
-face = geompy.MakeFace(wire, WantPlanarFace)
+face     = geompy.MakeFace(wire, WantPlanarFace)
 face_rot = geompy.MakeRotation(face, vector, angle)
 
 # make sewing
@@ -29,9 +28,9 @@ precision = 0.00001
 sewing = geompy.MakeSewing([face, face_rot], precision)
 
 # add objects in the study
-id_face = geompy.addToStudy(face, "Face")
+id_face     = geompy.addToStudy(face, "Face")
 id_face_rot = geompy.addToStudy(face_rot, "Face rotation")
-id_sewing = geompy.addToStudy(sewing, "Sewing")
+id_sewing   = geompy.addToStudy(sewing, "Sewing")
 
 # display the results
 gg.createAndDisplayGO(id_face)
@@ -40,3 +39,12 @@ gg.createAndDisplayGO(id_face_rot)
 gg.setDisplayMode(id_face_rot,1)
 gg.createAndDisplayGO(id_sewing)
 gg.setDisplayMode(id_sewing,1) 
+
+
+# Example 2: make a shell of a multiply translated face
+quad         = geompy.MakeFaceHW( 10, 20, 1 )
+quadCompound = geompy.MakeMultiTranslation1D( quad, geompy.MakeVectorDXDYDZ(1,0,0), 10, 3)
+shell        = geompy.Sew( quadCompound, 1e-6 )
+
+id_shell = geompy.addToStudy( shell, "3 quads shell")
+gg.createAndDisplayGO(id_shell)

doc/salome/examples/repairing_operations_ex10.py

@@ -6,6 +6,8 @@ import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
 
+# Variant 1: using DivideEdge()
+
 # create vertices
 p1 = geompy.MakeVertex(0,0,50)
 p2 = geompy.MakeVertex(60,0,50)
@@ -27,4 +29,15 @@ edge_points = geompy.SubShapeAllSortedCentres(divide, geompy.ShapeType["VERTEX"]
 for point in edge_points:
     geompy.addToStudyInFather(divide, point, "Edge's point after divide")
 
+
+# Variant 2: using DivideEdgeByPoint()
+ 
+box  = geompy.MakeBox(0,0,0, 10,10,10, theName="box")
+p1   = geompy.MakeVertex( 3, -2, 1, theName="point 1 to project" )
+p2   = geompy.MakeVertex( 7, -2, 1, theName="point 2 to project" )
+edge = geompy.GetEdgeNearPoint( box, p1, theName="edge to split")
+
+div  = geompy.DivideEdgeByPoint( box, edge, [p1, p2], theName="box (edge divided)")
+
+
 salome.sg.updateObjBrowser(1) 

doc/salome/examples/testme.py

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -24,11 +24,21 @@ import unittest, sys, os
 class SalomeSession(object):
     def __init__(self, script):
         import runSalome
-        sys.argv  = ["runSalome.py"]
+        run_script = "runSalome.py"
+        if sys.platform == 'win32':
+            module_dir = os.getenv("KERNEL_ROOT_DIR")
+            if module_dir: run_script = os.path.join(module_dir, "bin", "salome", run_script)
+            pass
+        sys.argv  = [run_script]
         sys.argv += ["--terminal"]
         sys.argv += ["--modules=GEOM"]
         sys.argv += ["%s" % script]
+        if sys.platform == 'win32':
+            main_module_path = sys.modules['__main__'].__file__
+            sys.modules['__main__'].__file__ = ''
         clt, d = runSalome.main()
+        if sys.platform == 'win32':
+            sys.modules['__main__'].__file__ = main_module_path
         return
 
     def __del__(self):

doc/salome/examples/topological_geom_objs_ex03.py

@@ -30,17 +30,29 @@ sketcher2 = geompy.MakeSketcher("Sketcher:F 0 0:TT 70 0:TT 70 70:TT 0 70:WW")
 sketcher3 = geompy.MakeSketcher("Sketcher:F 20 20:TT 50 20:TT 50 50:TT 20 50:WW")
 isPlanarFace = 1
 
+sphere = geompy.MakeSphereR(100)
+box = geompy.MakeBoxDXDYDZ(200, 200, 200)
+cut = geompy.MakeCutList(sphere, [box], True)
+
 # create a face from the wire
 face1 = geompy.MakeFace(wire, isPlanarFace)
 
 # create faces from two wires
 face2 = geompy.MakeFaceWires([wire, sketcher1],isPlanarFace)
 face3 = geompy.MakeFaces([sketcher2, sketcher3],isPlanarFace)
+face4 = geompy.MakeFaceFromSurface(face1, sketcher1)
+
+# create face from edges with constraints
+face5 = geompy.MakeFaceWithConstraints([geompy.GetSubShape(cut, [5]), geompy.GetSubShape(cut, [3]), 
+                                        geompy.GetSubShape(cut, [11]), geompy.GetSubShape(cut, [3]), 
+                                        geompy.GetSubShape(cut, [13]), geompy.GetSubShape(cut, [3])])
 
 # add objects in the study
 id_face1 = geompy.addToStudy(face1,"Face1")
 id_face2 = geompy.addToStudy(face2,"Face2")
 id_face3 = geompy.addToStudy(face3,"Face3")
+id_face4 = geompy.addToStudy(face4,"Face4")
+id_face5 = geompy.addToStudy(face5,"Face5")
 
 # display the faces
 gg.createAndDisplayGO(id_face1)
@@ -52,3 +64,9 @@ gg.setTransparency(id_face2,0.2)
 gg.createAndDisplayGO(id_face3)
 gg.setDisplayMode(id_face3,1)
 gg.setTransparency(id_face3,0.2) 
+gg.createAndDisplayGO(id_face4)
+gg.setDisplayMode(id_face4,1)
+gg.setTransparency(id_face4,0.2)
+gg.createAndDisplayGO(id_face5)
+gg.setDisplayMode(id_face5,1)
+gg.setTransparency(id_face5,0.2)

doc/salome/examples/topological_geom_objs_ex07.py

@@ -0,0 +1,46 @@
+# Creation of a Solid(s) from connected faces
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+gg = salome.ImportComponentGUI("GEOM")
+
+# create a box 
+box = geompy.MakeBoxDXDYDZ(200, 200, 200)
+
+# make a copy of a box translated by X coordinate
+box_translation = geompy.MakeTranslation(box, 200, 0, 0)
+
+# extract shells from boxes
+box_shell = geompy.SubShapeAllSorted(box, geompy.ShapeType["SHELL"])[0]
+box_translation_shell = geompy.SubShapeAllSorted(box_translation, geompy.ShapeType["SHELL"])[0]
+
+# extract faces from boxes 
+box_faces = geompy.SubShapeAllSorted(box, geompy.ShapeType["FACE"])
+box_translation_faces = geompy.SubShapeAllSorted(box_translation, geompy.ShapeType["FACE"])
+
+# create solids from shells
+msf_shells_noint = geompy.MakeSolidFromConnectedFaces([box_shell, box_translation_shell],0)
+msf_shells_int = geompy.MakeSolidFromConnectedFaces([box_shell, box_translation_shell], 1)
+
+# create solids from faces
+msf_faces_noint = geompy.MakeSolidFromConnectedFaces(box_faces+box_translation_faces, 0)
+msf_faces_int = geompy.MakeSolidFromConnectedFaces(box_faces+box_translation_faces, 1)
+
+# add objects in the study
+id_solid_shells_noint = geompy.addToStudy(msf_shells_noint,"Solid_from_shells_no_intersect")
+id_solid_shells_int = geompy.addToStudy(msf_shells_int,"Solid_from_shells_intersect")
+id_solid_faces_noint = geompy.addToStudy(msf_faces_noint,"Solid_from_faces_no_intersect")
+id_solid_faces_int = geompy.addToStudy(msf_faces_int,"Solid_from_faces_intersect")
+
+# display the results
+gg.createAndDisplayGO(id_solid_shells_noint)
+gg.setDisplayMode(id_solid_shells_noint,1) 
+gg.createAndDisplayGO(id_solid_shells_int)
+gg.setDisplayMode(id_solid_shells_int,1) 
+gg.createAndDisplayGO(id_solid_faces_noint)
+gg.setDisplayMode(id_solid_faces_noint,1) 
+gg.createAndDisplayGO(id_solid_faces_int)
+gg.setDisplayMode(id_solid_faces_int,1) 

doc/salome/examples/transformation_operations_ex07.py

@@ -2,7 +2,6 @@
 
 import salome
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
 
@@ -25,24 +24,33 @@ projection = geompy.MakeProjection(curve, face_cyl)
 # add objects in the study
 geompy.addToStudy(cylinder, "cylinder")
 geompy.addToStudyInFather(cylinder, face_cyl, "face_cyl")
-geompy.addToStudy(p1, "p1")
-geompy.addToStudy(p2, "p2")
-geompy.addToStudy(p3, "p3")
-geompy.addToStudy(p4, "p4")
-geompy.addToStudy(p5, "p5")
 geompy.addToStudy(curve, "curve")
 geompy.addToStudy(projection, "projection")
 
-#projection of point on wire.
+#projection of point on wire
 e1 = geompy.MakeLineTwoPnt(p1, p2)
 e2 = geompy.MakeLineTwoPnt(p2, p3)
 
 w1 = geompy.MakeWire([e1, e2], 1.e-7)
 v1 = geompy.MakeVertex(300, 40, 100)
 
-prj = geompy.MakeProjectionOnWire(v1, w1)
+prj = geompy.MakeProjection(v1, w1)
-geompy.addToStudy(e1, "e1")
-geompy.addToStudy(e2, "e2")
 geompy.addToStudy(w1, "w1")
 geompy.addToStudy(v1, "v1")
-geompy.addToStudy(prj[1], "projOnWire")
+geompy.addToStudy(prj, "projOnWire")
+
+#projection of a wire on cylinder
+pp1 = geompy.MakeVertex(100, 200, 0)
+pp2 = geompy.MakeVertex(100, 200, 80)
+pp3 = geompy.MakeVertex(100, 220, 90)
+pp4 = geompy.MakeVertex(100, 130, 80)
+pp5 = geompy.MakeVertex(100, 90, 80)
+cc1 = geompy.MakeInterpol([pp1, pp2, pp3, pp4, pp5], True, False)
+ww1 = geompy.MakeWire([cc1], 1.e-7)
+vx = geompy.MakeVectorDXDYDZ(100, 0, 0)
+pln1 = geompy.MakePlane(pp1, vx, 200)
+face1 = geompy.MakeFaceFromSurface(pln1, ww1)
+prj_cyl = geompy.MakeProjectionOnCylinder(face1, 100)
+
+geompy.addToStudy(face1, "pln_face")
+geompy.addToStudy(prj_cyl, "projOnCylinder")

doc/salome/examples/transformation_operations_ex14.py

@@ -0,0 +1,75 @@
+# Extend Edge and Face
+
+import salome
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+gg = salome.ImportComponentGUI("GEOM")
+
+# create vertices
+p1 = geompy.MakeVertex(  0.,     0.,   0.)
+p2 = geompy.MakeVertex(100.,   100.,   0.)
+p3 = geompy.MakeVertex(  0.,   100.,   0.)
+
+# create edges
+edge1 = geompy.MakeEdge(p1, p2)
+edge2 = geompy.MakeCircleR(100)
+
+# create faces
+face1   = geompy.MakePlaneThreePnt(p1, p2, p3, 200)
+sphere1 = geompy.MakeSpherePntR(p1, 100)
+faces2  = geompy.SubShapeAllSorted(sphere1, GEOM.FACE)
+face2   = faces2[0]
+
+# perform edge extension
+resEdge1 = geompy.ExtendEdge(edge1,  0.2,  0.8)
+resEdge2 = geompy.ExtendEdge(edge1, -0.3,  1.3)
+resEdge3 = geompy.ExtendEdge(edge2,  0.5,  1)
+resEdge4 = geompy.ExtendEdge(edge2,  0.2,  0.5)
+
+# perform face extension
+resFace1 = geompy.ExtendFace(face1, 0.2, 0.8, -0.3, 1.3)
+resFace2 = geompy.ExtendFace(face1, 0,   0.5,  1,   2)
+resFace3 = geompy.ExtendFace(face2, 0.2, 0.8,  0.3, 0.7)
+resFace4 = geompy.ExtendFace(face2, 0.5, 1,    0.5, 1)
+
+# add objects in the study
+id_edge1    = geompy.addToStudy(edge1,    "Edge 1")
+id_edge2    = geompy.addToStudy(edge2,    "Edge 2")
+id_face1    = geompy.addToStudy(face1,    "Face 1")
+id_face2    = geompy.addToStudy(face2,    "Face 2")
+id_resEdge1 = geompy.addToStudy(resEdge1, "Extended Edge 1")
+id_resEdge2 = geompy.addToStudy(resEdge2, "Extended Edge 1")
+id_resEdge3 = geompy.addToStudy(resEdge3, "Extended Edge 2")
+id_resEdge4 = geompy.addToStudy(resEdge4, "Extended Edge 3")
+id_resFace1 = geompy.addToStudy(resFace1, "Extended Face 1")
+id_resFace2 = geompy.addToStudy(resFace2, "Extended Face 2")
+id_resFace3 = geompy.addToStudy(resFace3, "Extended Face 3")
+id_resFace4 = geompy.addToStudy(resFace4, "Extended Face 4")
+
+# display the prism and the results of chamfer operation
+gg.createAndDisplayGO(id_edge1)
+gg.setDisplayMode(id_edge1, 1)
+gg.createAndDisplayGO(id_edge2)
+gg.setDisplayMode(id_edge2, 1)
+gg.createAndDisplayGO(id_face1)
+gg.setDisplayMode(id_face1, 1)
+gg.createAndDisplayGO(id_face2)
+gg.setDisplayMode(id_face2, 1)
+gg.createAndDisplayGO(id_resEdge1)
+gg.setDisplayMode(id_resEdge1, 1) 
+gg.createAndDisplayGO(id_resEdge2)
+gg.setDisplayMode(id_resEdge2, 1)
+gg.createAndDisplayGO(id_resEdge3)
+gg.setDisplayMode(id_resEdge3, 1)
+gg.createAndDisplayGO(id_resEdge4)
+gg.setDisplayMode(id_resEdge4, 1)
+gg.createAndDisplayGO(id_resFace1)
+gg.setDisplayMode(id_resFace1, 1)
+gg.createAndDisplayGO(id_resFace2)
+gg.setDisplayMode(id_resFace2, 1) 
+gg.createAndDisplayGO(id_resFace3)
+gg.setDisplayMode(id_resFace3, 1)
+gg.createAndDisplayGO(id_resFace4)
+gg.setDisplayMode(id_resFace4, 1) 

doc/salome/examples/viewing_geom_objs_ex01.py

@@ -17,3 +17,4 @@ gg.createAndDisplayGO(fuse_id)
 gg.setDisplayMode(fuse_id,1)
 gg.setVectorsMode(fuse_id, 1)
 gg.setVerticesMode(fuse_id, 1)
+gg.setNameMode(fuse_id, 1)

doc/salome/gui/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/GEOM/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

doc/salome/gui/GEOM/collect_geom_methods.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 #  -*- coding: utf-8 -*-
-# Copyright (C) 2012-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -117,16 +117,22 @@ if __name__ == "__main__":
     if len( args ) < 1: sys.exit("Plugin name is not specified")
 
     f = open(options.output, "w")
-    
+
+    if len(args) > 1:
+        plugins_names = " ".join(args) + " plugins"
+    elif len(args) == 1:
+        plugins_names = args[0] + " plugin"
+    else:
+        plugins_names = ""
     output = []
     if options.dummygeomhelp:
         output.append( "## @package geomBuilder" )
-        output.append( "#  Documentation of the methods dynamically added by the " + plugin_name + " Geometry plug-in to the geomBuilder class." )
+        output.append( "#  Documentation of the methods dynamically added by the " + plugins_names + " to the @b %geomBuilder class." )
         # Add dummy Geometry help
         # This is supposed to be done when generating documentation for Geometry module plug-ins
         output.append( "#  @note The documentation below does not provide complete description of class @b %geomBuilder" )
         output.append( "#  from @b geomBuilder package. This documentation provides only information about" )
-        output.append( "#  the methods dynamically added to the %geomBuilder class by the " + plugin_name + " plugin" )
+        output.append( "#  the methods dynamically added to the %geomBuilder class by the " + plugins_names + "." )
         output.append( "#  For more details on the %geomBuilder class, please refer to the SALOME %Geometry module" )
         output.append( "#  documentation." )
         pass

doc/salome/gui/GEOM/doxyfile.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/GEOM/doxyfile_py.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/GEOM/doxyfile_tui.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS