0022765: [EDF] Improvement of local selection mechanism

This commit is contained in:
ana 2014-11-19 15:40:00 +03:00 committed by vsr
parent 33eddb946d
commit 5f650dfab8
44 changed files with 579 additions and 216 deletions

Binary file not shown.

Before

Width:  |  Height:  |  Size: 19 KiB

After

Width:  |  Height:  |  Size: 17 KiB

View File

@ -8,7 +8,15 @@ This operation returns the angle in degrees between two lines or linear edges.
If both objects are <b>vectors</b>, the angle is computed in accordance with their orientations, otherwise the minimum angle is computed.
\n <b>TUI Command:</b> <em>geompy.GetAngle(shape1, shape2),</em> where
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em>geompy.GetAngle(shape1, shape2),</em> where
Shape1 and Shape2 are shapes between which the angle is computed.
Another TUI command is <em>geompy.GetAngleRadians(shape1,shape2),</em>
which returns the value of angle in radians.

View File

@ -7,7 +7,15 @@ geometrical object.
\image html neo-basicprop.png
\n<b>TUI Command:</b> <em>geompy.BasicProperties(Shape),</em> where
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em>geompy.BasicProperties(Shape),</em> where
\em Shape is a shape whose properties are inquired.
See also a \ref tui_basic_properties_page "TUI example".

View File

@ -10,7 +10,15 @@ The coordinates of two corners of its bounding box are shown in the table.
Press \b Apply or <b>Apply and Close</b> button to publish the bounding \b Box in the study.
\n <b>TUI Commands:</b> <em>[Xmin,Xmax, Ymin,Ymax, Zmin,Zmax] = geompy.BoundingBox(Shape, precise)</em>,
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Commands:</b> <em>[Xmin,Xmax, Ymin,Ymax, Zmin,Zmax] = geompy.BoundingBox(Shape, precise)</em>,
<em>BBox = geompy.MakeBoundingBox(Shape, precise)</em>, where \em Shape
is the shape for which the bounding box is computed. \em precise TRUE
for precise computation; FALSE for fast one. Default value is False.

View File

@ -9,7 +9,15 @@ the selected geometrical object.
Press \b Apply or <b>Apply and Close</b> button to publish the \b Point in the study.
\n <b>TUI Command:</b> <em> geompy.MakeCDG(Shape),</em> where \em Shape is
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em> geompy.MakeCDG(Shape),</em> where \em Shape is
the shape for which a center of gravity is computed.
See also a \ref tui_center_of_mass_page "TUI example".

View File

@ -54,7 +54,7 @@ projected point.
\image html point3_2.png
\n Fourthly, we can define a point by intersection of two \b Lines or \b Wires (or a Wire and a Line).
If they intersect only once, a point will be created. If there are several intersections, a compound of points will be created. The type of the selected object (Line or Wire) can be changed in the popup menu, after clicking the corresponding selection button.
If they intersect only once, a point will be created. If there are several intersections, a compound of points will be created.
\n <b>TUI Command:</b> <em>geompy.MakePointOnLinesIntersection(myLine1,myWire1).</em>
\n <b>Arguments:</b> Name + 2 1D objects
@ -75,6 +75,14 @@ The position of the point on it can be defined in one of two ways:
\image html point5_2.png
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>Example:</b>
\image html points.png "Points by edge and parameter and by coordinates"

View File

@ -10,7 +10,15 @@ The table displays:
- 3*3 matrix of its own moments of inertia (in rows <b> 1:1, 2:1</b> and <b>3:1</b>) and
- the relative moments of inertia (in row <b>IX & IY & IZ</b>)
\n <b>TUI Command:</b> <em>geompy.Inertia(Shape),</em> where \em Shape is
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em>geompy.Inertia(Shape),</em> where \em Shape is
a shape for which the own matrix of inertia and the relative moments of inertia are
returned.

View File

@ -17,11 +17,20 @@ Select one of the found solutions in the \b Solution list to display it in the V
Press \b Apply or <b>Apply and Close</b> button to create a set of closest
points, corresponding to all found solutions.
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Commands:</b>
\n<em>aDist = geompy.MinDistance(Shape1, Shape2),</em>
\n<em>[aDist, DX, DY, DZ] = geompy.MinDistanceComponents(Shape1, Shape2),</em>
\n<em>[nbSols, (x11, y11, z11, x21, y21, z21, ...)] = geompy.ClosestPoints(Shape1, Shape2),</em>
\n where \em Shape1 and \em Shape2 are the shapes, between which the minimal
- <em>aDist = geompy.MinDistance(Shape1, Shape2),</em>
- <em>[aDist, DX, DY, DZ] = geompy.MinDistanceComponents(Shape1, Shape2),</em>
- <em>[nbSols, (x11, y11, z11, x21, y21, z21, ...)] = geompy.ClosestPoints(Shape1, Shape2),</em>
.
where \em Shape1 and \em Shape2 are the shapes, between which the minimal
distance is computed.
See also a \ref tui_min_distance_page "TUI example".

View File

@ -2,11 +2,12 @@
\page projection_operation_page Projection
\n To produce a <b>Projection</b> in the <b>Main Menu</b> select
To produce a <b>Projection</b> in the <b>Main Menu</b> select
<b>Operations - > Transformation - > Projection</b>
\n This operation makes normal projection of one shape to another.
\n There are 3 types of projection different by types of operands.
This operation makes normal projection of one shape to another.
There are 3 types of projection different by types of operands.
Firstly, you can project <b>Source vertex, edge or wire</b> on a given <b>Target face</b>.
@ -22,14 +23,22 @@ Thirdly, you can project <b>Source vertex</b> on a given <b>Target edge</b>.
\ref restore_presentation_parameters_page "Advanced options".
\n <b>Example:</b>
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>Example:</b>
\image html projection_preview.png "The curve (in red) and its projection on the cylindric surface"
\n <b>TUI Command:</b> <em>geompy.MakeProjection(Source, Target),</em>
where \em Source is a shape which has to be projected, \em Target
is a shape, on which the \em Source shape will be projected. The \em
Result will be a \em GEOM_Object.
<b>TUI Command:</b> <em>geompy.MakeProjection(Source, Target),</em>
\n where \em Source is a shape which has to be projected, \em Target
is a shape, on which the \em Source shape will be projected. The \em
Result will be a \em GEOM_Object.
Our <b>TUI Scripts</b> provide you with useful examples of the use of
\ref tui_projection "Transformation Operations".

View File

@ -16,6 +16,14 @@ In this dialog:
- Activate \ref restore_presentation_parameters_page "Advanced options" if required.
- Press "Apply" or "Apply & Close" button to get the result (VERTEX, EDGE, WIRE or COMPOUND).
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
This operation can be performed using a <b>TUI Command:</b>
<em>geompy.MakeSection(s1, s2, checkSelfInte)</em>

View File

@ -9,7 +9,15 @@ geometrical object.
The table displays \b Min and \b Max tolerance values for \b Face, \b Edge and \b Vertex tolerance.
\n <b>TUI Command:</b> <em>geompy.Tolerance(Shape),</em> where \em Shape
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em>geompy.Tolerance(Shape),</em> where \em Shape
is a shape for which minimal and maximal tolerances are returned.
See also a \ref tui_tolerance_page "TUI example".

View File

@ -5,22 +5,30 @@
This operation provides the list of types and quantities of all topological
entities, composing the selected geometrical object.
For the COMPOUND or COMPSOLID shape, additionally the information about
For the \em COMPOUND or \em COMPSOLID shape, additionally the information about
"flat" content is shown - a number of "simple" top-level shapes enclosed into the compound.
\image html measures8.png
\n <b>TUI Command:</b> <em>geompy.WhatIs(Shape),</em> where \em Shape is a
\note This dialog supports navigation through the selectable objects (in OCC 3D viewer only):
- Scroll mouse wheel with pressed \em Ctrl key or press \em "S", \em "P" keys when input focus is
in the viewer to navigate between selectable objects.
- Press left mouse button to select an appropriate object to the dialog box.
.
For more details, please refer to the \em "Functionality common for OCC and VTK viewers" chapter
of the GUI module's documentation.
<b>TUI Command:</b> <em>geompy.WhatIs(Shape),</em> where \em Shape is a
shape from which a description is returned.
\n <b>Kind of Shape</b> field characterizes the
<b>Kind of Shape</b> field characterizes the
whole shape. If there is no additional information about the
shape, <b>Basic Properties</b> button is disabled, otherwise it
provides information about center and dimensions of the shape.
\image html measures8a.png
\n <b>TUI Command:</b> <em>geompy.KindOfShape(Shape),</em> where \em Shape is a
<b>TUI Command:</b> <em>geompy.KindOfShape(Shape),</em> where \em Shape is a
shape from which a description is returned.
See also a \ref tui_whatis_page "TUI example".

View File

@ -119,6 +119,8 @@ void AdvancedGUI_SmoothingSurfaceDlg::Init()
showOnlyPreviewControl();
globalSelection();
localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX );
//@@ initialize dialog box widgets here @@//
// Signal/slot connections
@ -160,7 +162,8 @@ bool AdvancedGUI_SmoothingSurfaceDlg::ClickOnApply()
return false;
initName();
globalSelection();
localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX );
return true;
}
@ -171,6 +174,8 @@ bool AdvancedGUI_SmoothingSurfaceDlg::ClickOnApply()
void AdvancedGUI_SmoothingSurfaceDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
globalSelection();
localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX );
//displayPreview();
}
@ -249,6 +254,16 @@ bool AdvancedGUI_SmoothingSurfaceDlg::execute (ObjectList& objects)
return res;
}
//=================================================================================
// function : addSubshapesToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void AdvancedGUI_SmoothingSurfaceDlg::addSubshapesToStudy()
{
for ( int i = 0; i < myPoints.count(); i++ )
GEOMBase::PublishSubObject( myPoints[i].get() );
}
//=================================================================================
// function : getNbPoints()
// purpose : Returns the number of points in myPoints list.
@ -337,5 +352,7 @@ void AdvancedGUI_SmoothingSurfaceDlg::SetEditCurrentArgument()
if ( sender() == GroupPoints->PushButton1 )
myEditCurrentArgument = GroupPoints->LineEdit1;
myEditCurrentArgument->setFocus();
globalSelection();
localSelection(GEOM::GEOM_Object::_nil(), TopAbs_VERTEX );
SelectionIntoArgument();
}

View File

@ -45,6 +45,7 @@ protected:
virtual GEOM::GEOM_IOperations_ptr createOperation();
virtual bool isValid( QString& );
virtual bool execute( ObjectList& );
virtual void addSubshapesToStudy();
private:
void Init();

View File

@ -45,6 +45,7 @@
#include <QRadioButton>
#include <QMenu>
#include <QTimer>
#include <QList>
#include <gp_Pnt.hxx>
#include <TopoDS_Shape.hxx>
@ -68,8 +69,6 @@
#define SPACING 6
#define MARGIN 9
enum { SelectEdge, SelectWire };
//=================================================================================
// class : BasicGUI_PointDlg()
// purpose : Constructs a BasicGUI_PointDlg which is a child of 'parent', with the
@ -150,20 +149,15 @@ BasicGUI_PointDlg::BasicGUI_PointDlg(GeometryGUI* theGeometryGUI, QWidget* paren
GroupRefPoint->TextLabel4->setText(tr("GEOM_DZ"));
/* popup menu for line intersect buttons */
myBtnPopup = new QMenu(this);
QIcon ico_line = QIcon(image6);
QIcon ico_wire = QIcon(image7);
myActions[myBtnPopup->addAction(ico_line, tr("GEOM_EDGE"))] = SelectEdge;
myActions[myBtnPopup->addAction(ico_wire, tr("GEOM_WIRE"))] = SelectWire;
GroupLineIntersection = new DlgRef_2Sel(centralWidget());
GroupLineIntersection->GroupBox1->setTitle(tr("GEOM_LINE_INTERSECTION"));
GroupLineIntersection->TextLabel1->setText(tr("GEOM_LINE1"));
GroupLineIntersection->TextLabel2->setText(tr("GEOM_LINE2"));
GroupLineIntersection->PushButton1->setIcon(image2);
GroupLineIntersection->PushButton1->setMenu(myBtnPopup);
GroupLineIntersection->PushButton2->setIcon(image2);
GroupLineIntersection->PushButton2->setMenu(myBtnPopup);
GroupLineIntersection->LineEdit2->setEnabled(false);
myCoordGrp = new QGroupBox(tr("GEOM_COORDINATES_RES"), centralWidget());
@ -287,8 +281,6 @@ void BasicGUI_PointDlg::Init()
connect(GroupLineIntersection->PushButton1, SIGNAL(pressed()), this, SLOT(SetEditCurrentArgument()));
connect(GroupLineIntersection->PushButton2, SIGNAL(pressed()), this, SLOT(SetEditCurrentArgument()));
connect(myBtnPopup, SIGNAL(triggered(QAction*)), this, SLOT(onBtnPopup(QAction*)));
connect(GroupOnCurve->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
connect(GroupOnSurface->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
connect(GroupOnSurface->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
@ -391,8 +383,9 @@ void BasicGUI_PointDlg::ConstructorsClicked(int constructorId)
case GEOM_POINT_INTINT:
{
globalSelection(); // close local contexts, if any
myNeedType = TopAbs_EDGE;
localSelection(GEOM::GEOM_Object::_nil(), myNeedType);
std::list<int> needTypes;
needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
myEditCurrentArgument = GroupLineIntersection->LineEdit1;
GroupLineIntersection->LineEdit1->setText("");
@ -500,7 +493,14 @@ void BasicGUI_PointDlg::SelectionIntoArgument()
myLine2.nullify();
}
GEOM::GeomObjPtr aSelectedObject = getSelected(myNeedType);
GEOM::GeomObjPtr aSelectedObject;
if (id == GEOM_POINT_INTINT) {
QList<TopAbs_ShapeEnum> needTypes;
needTypes << TopAbs_EDGE, needTypes << TopAbs_WIRE;
aSelectedObject= getSelected(needTypes);
}
else
aSelectedObject= getSelected(myNeedType);
TopoDS_Shape aShape;
if (aSelectedObject && GEOMBase::GetShape(aSelectedObject.get(), aShape) && !aShape.IsNull()) {
QString aName = GEOMBase::GetName(aSelectedObject.get());
@ -535,19 +535,13 @@ void BasicGUI_PointDlg::SelectionIntoArgument()
if (myEditCurrentArgument == GroupLineIntersection->LineEdit1) {
myLine1 = aSelectedObject;
if (myLine1 && !myLine2) {
GroupLineIntersection->PushButton2->setMenu(0);
GroupLineIntersection->PushButton2->click();
GroupLineIntersection->PushButton2->setDown(true);
GroupLineIntersection->PushButton2->setMenu(myBtnPopup);
}
}
else if (myEditCurrentArgument == GroupLineIntersection->LineEdit2) {
myLine2 = aSelectedObject;
if (myLine2 && !myLine1) {
GroupLineIntersection->PushButton1->setMenu(0);
GroupLineIntersection->PushButton1->click();
GroupLineIntersection->PushButton1->setDown(true);
GroupLineIntersection->PushButton1->setMenu(myBtnPopup);
}
}
}
@ -992,17 +986,6 @@ void BasicGUI_PointDlg::updateParamCoord(bool theIsUpdate)
QTimer::singleShot(50, this, SLOT(updateSize()));
}
//=================================================================================
// function : onBtnPopup()
// purpose :
//=================================================================================
void BasicGUI_PointDlg::onBtnPopup(QAction* a)
{
globalSelection(); // close local contexts, if any
myNeedType = myActions[a] == SelectEdge ? TopAbs_EDGE : TopAbs_WIRE;
localSelection(GEOM::GEOM_Object::_nil(), myNeedType);
}
//=================================================================================
// function : updateSize
// purpose : adjust dialog size to minimum

View File

@ -99,7 +99,6 @@ private:
QGroupBox* myParamGroup;
QButtonGroup* myParamCoord;
QMenu* myBtnPopup;
QMap<QAction*, int> myActions;
TopAbs_ShapeEnum myNeedType;
@ -116,7 +115,6 @@ private slots:
void SetDoubleSpinBoxStep( double );
void ClickParamCoord( int );
void CheckBoxClicked( int );
void onBtnPopup( QAction* );
void updateSize();
};

View File

@ -199,6 +199,10 @@ void BooleanGUI_Dialog::Init()
globalSelection(GEOM_ALLSHAPES);
std::list<int> needTypes;
needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL ), needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
myGroup->PushButton1->click();
SelectionIntoArgument();
resize(100,100);
@ -236,8 +240,7 @@ bool BooleanGUI_Dialog::ClickOnApply()
//=================================================================================
void BooleanGUI_Dialog::reset()
{
myObjects = new GEOM::ListOfGO;
myObjects->length( 0 );
myObjects.clear();
}
//=================================================================================
@ -262,12 +265,11 @@ void BooleanGUI_Dialog::singleSelection()
if (myEditCurrentArgument == myGroup->LineEdit1) {
myObject1 = aSelectedObject;
if (!myGroup->PushButton2->isHidden() && !myObjects->length())
if (!myGroup->PushButton2->isHidden() && !myObjects.count())
myGroup->PushButton2->click();
}
else if (myEditCurrentArgument == myGroup->LineEdit2) {
myObjects->length(1);
myObjects[0] = aSelectedObject.get();
myObjects << aSelectedObject;
if (!myObject1)
myGroup->PushButton1->click();
}
@ -287,23 +289,11 @@ void BooleanGUI_Dialog::multipleSelection()
myEditCurrentArgument->setText( "" );
reset();
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
myObjects->length(aSelList.Extent());
myObjects = getSelected( TopAbs_SHAPE, -1 );
int i = 0;
for (SALOME_ListIteratorOfListIO anIt (aSelList); anIt.More(); anIt.Next()) {
GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( anIt.Value() );
if ( !CORBA::is_nil( aSelectedObject ) ) {
myObjects[i++] = aSelectedObject;
}
}
myObjects->length( i );
int i = myObjects.count();
if ( i == 1 ) {
myEditCurrentArgument->setText( GEOMBase::GetName( myObjects[0] ) );
myEditCurrentArgument->setText( GEOMBase::GetName( myObjects.first().get() ) );
} else if ( i > 0 ) {
myEditCurrentArgument->setText( QString::number( i ) + "_" + tr( "GEOM_OBJECTS" ) );
}
@ -315,6 +305,7 @@ void BooleanGUI_Dialog::multipleSelection()
//=================================================================================
void BooleanGUI_Dialog::SelectionIntoArgument()
{
myEditCurrentArgument->setText("");
if ( myOperation == BooleanGUI::SECTION ||
(myOperation == BooleanGUI::CUT &&
myEditCurrentArgument == myGroup->LineEdit1)) {
@ -349,11 +340,19 @@ void BooleanGUI_Dialog::SetEditCurrentArgument()
myGroup->LineEdit1->setEnabled(false);
}
globalSelection(GEOM_ALLSHAPES);
std::list<int> needTypes;
needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL ), needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
// enable line edit
myEditCurrentArgument->setEnabled(true);
myEditCurrentArgument->setFocus();
// after setFocus(), because it will be setDown(false) when loses focus
send->setDown(true);
SelectionIntoArgument();
}
//=================================================================================
@ -399,13 +398,13 @@ bool BooleanGUI_Dialog::isValid (QString&)
switch (myOperation) {
case BooleanGUI::FUSE:
case BooleanGUI::COMMON:
isOK = myObjects->length() > 1;
isOK = myObjects.count() > 1;
break;
case BooleanGUI::CUT:
isOK = myObject1 && myObjects->length();
isOK = myObject1 && myObjects.count();
break;
case BooleanGUI::SECTION:
isOK = myObject1 && (myObjects->length() == 1);
isOK = myObject1 && (myObjects.count() == 1);
break;
default:
break;
@ -425,25 +424,30 @@ bool BooleanGUI_Dialog::execute (ObjectList& objects)
GEOM::GEOM_IBooleanOperations_var anOper = GEOM::GEOM_IBooleanOperations::_narrow(getOperation());
const bool isCheckSelfInte = myGroup->CheckBox1->isChecked();
GEOM::ListOfGO_var anObjects = new GEOM::ListOfGO();
anObjects->length( myObjects.count() );
for ( int i = 0; i < myObjects.count(); i++ )
anObjects[i] = myObjects[i].copy();
switch (myOperation) {
case BooleanGUI::FUSE:
{
const bool isRmExtraEdges = myGroup->CheckBox2->isChecked();
anObj = anOper->MakeFuseList
(myObjects, isCheckSelfInte, isRmExtraEdges);
(anObjects, isCheckSelfInte, isRmExtraEdges);
}
break;
case BooleanGUI::COMMON:
anObj = anOper->MakeCommonList(myObjects, isCheckSelfInte);
anObj = anOper->MakeCommonList(anObjects, isCheckSelfInte);
break;
case BooleanGUI::CUT:
anObj =
anOper->MakeCutList(myObject1.get(), myObjects, isCheckSelfInte);
anOper->MakeCutList(myObject1.get(), anObjects, isCheckSelfInte);
break;
case BooleanGUI::SECTION:
anObj = anOper->MakeBoolean
(myObject1.get(), myObjects[0], myOperation, isCheckSelfInte);
(myObject1.get(), anObjects[0], myOperation, isCheckSelfInte);
break;
default:
break;
@ -470,3 +474,14 @@ void BooleanGUI_Dialog::restoreSubShapes (SALOMEDS::Study_ptr theStudy,
mainFrame()->CheckBoxAddPrefix->isChecked()); // ? false
}
}
//=================================================================================
// function : addSubshapesToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void BooleanGUI_Dialog::addSubshapesToStudy()
{
GEOMBase::PublishSubObject( myObject1.get() );
for ( int i = 0; i < myObjects.count(); i++ )
GEOMBase::PublishSubObject( myObjects[i].get() );
}

View File

@ -51,6 +51,7 @@ protected:
virtual bool isValid( QString& );
virtual bool execute( ObjectList& );
virtual void restoreSubShapes( SALOMEDS::Study_ptr, SALOMEDS::SObject_ptr );
virtual void addSubshapesToStudy();
private:
void Init();
@ -63,7 +64,7 @@ private:
int myOperation;
GEOM::GeomObjPtr myObject1;
GEOM::ListOfGO_var myObjects;
QList<GEOM::GeomObjPtr> myObjects;
DlgRef_2Sel2Spin3Check* myGroup;

View File

@ -461,9 +461,9 @@ void GEOMBase_Helper::activate( const int theType )
//================================================================
// Function : localSelection
// Purpose : Activate selection of sub-shapes in accordance with mode
// theMode is from TopAbs_ShapeEnum
// modes are from TopAbs_ShapeEnum
//================================================================
void GEOMBase_Helper::localSelection( const ObjectList& theObjs, const int theMode )
void GEOMBase_Helper::localSelection( const ObjectList& theObjs, const std::list<int> modes )
{
SALOME_ListIO aListOfIO;
@ -479,7 +479,7 @@ void GEOMBase_Helper::localSelection( const ObjectList& theObjs, const int theMo
anEntry.toLatin1().constData(), "GEOM", strdup( GEOMBase::GetName( anObj ).toLatin1().constData() ) ) );
}
getDisplayer()->LocalSelection( aListOfIO, theMode );
getDisplayer()->LocalSelection( aListOfIO, modes );
}
//================================================================
@ -487,19 +487,42 @@ void GEOMBase_Helper::localSelection( const ObjectList& theObjs, const int theMo
// Purpose : Activate selection of sub-shapes in accordance with mode
// theMode is from TopAbs_ShapeEnum
//================================================================
void GEOMBase_Helper::localSelection( GEOM::GEOM_Object_ptr obj, const int mode )
void GEOMBase_Helper::localSelection( const ObjectList& theObjs, const int theMode )
{
std::list<int> modes;
modes.push_back( theMode );
localSelection( theObjs, modes );
}
//================================================================
// Function : localSelection
// Purpose : Activate selection of sub-shapes in accordance with mode
// modes are from TopAbs_ShapeEnum
//================================================================
void GEOMBase_Helper::localSelection( GEOM::GEOM_Object_ptr obj, const std::list<int> modes )
{
// If object is null local selection for all objects is activated
if ( obj->_is_nil() ) {
getDisplayer()->LocalSelection( Handle(SALOME_InteractiveObject)(), mode );
getDisplayer()->LocalSelection( Handle(SALOME_InteractiveObject)(), modes );
return;
}
ObjectList objList;
objList.push_back( obj );
localSelection( objList, mode );
localSelection( objList, modes );
}
//================================================================
// Function : localSelection
// Purpose : Activate selection of sub-shapes in accordance with mode
// mode is from TopAbs_ShapeEnum
//================================================================
void GEOMBase_Helper::localSelection( GEOM::GEOM_Object_ptr obj, const int mode )
{
std::list<int> modes;
modes.push_back( mode );
localSelection( obj, modes );
}
//================================================================
// Function : globalSelection

View File

@ -95,7 +95,9 @@ protected:
const bool = true );
void erasePreview ( const bool = true );
void localSelection( const ObjectList&, const std::list<int> );
void localSelection( const ObjectList&, const int );
void localSelection( GEOM::GEOM_Object_ptr, const std::list<int> );
void localSelection( GEOM::GEOM_Object_ptr, const int );
void activate( const int );
void globalSelection( const int = GEOM_ALLOBJECTS, const bool = false );

View File

@ -1797,7 +1797,7 @@ void GEOM_Displayer::internalReset()
* of their sub-shapes (with opened local context for OCC viewer)
*/
//=================================================================
void GEOM_Displayer::LocalSelection( const Handle(SALOME_InteractiveObject)& theIO, const int theMode )
void GEOM_Displayer::LocalSelection( const Handle(SALOME_InteractiveObject)& theIO, const std::list<int> modes )
{
SUIT_Session* session = SUIT_Session::session();
SalomeApp_Application* app = dynamic_cast<SalomeApp_Application*>( session->activeApplication() );
@ -1814,11 +1814,25 @@ void GEOM_Displayer::LocalSelection( const Handle(SALOME_InteractiveObject)& the
if (!theIO.IsNull() && !vf->isVisible(theIO))
Display(theIO);
SALOME_Prs* prs = vf->CreatePrs( theIO.IsNull() ? 0 : theIO->getEntry() );
vf->LocalSelection( prs, theMode );
vf->LocalSelection( prs, modes );
delete prs; // delete presentation because displayer is its owner
}
}
//=================================================================
/*!
* GEOM_Displayer::LocalSelection
* Activate selection of CAD shapes with activisation of selection
* of their sub-shapes (with opened local context for OCC viewer)
*/
//=================================================================
void GEOM_Displayer::LocalSelection( const Handle(SALOME_InteractiveObject)& theIO, const int theMode )
{
std::list<int> modes;
modes.push_back( theMode );
LocalSelection( theIO, modes );
}
//=================================================================
/*!
* GEOM_Displayer::globalSelection
@ -1932,11 +1946,25 @@ void GEOM_Displayer::GlobalSelection( const TColStd_MapOfInteger& theModes,
* of their sub-shapes (with opened local context for OCC viewer)
*/
//=================================================================
void GEOM_Displayer::LocalSelection( const SALOME_ListIO& theIOList, const int theMode )
void GEOM_Displayer::LocalSelection( const SALOME_ListIO& theIOList, const std::list<int> modes )
{
SALOME_ListIteratorOfListIO Iter( theIOList );
for ( ; Iter.More(); Iter.Next() )
LocalSelection( Iter.Value(), theMode );
LocalSelection( Iter.Value(), modes );
}
//=================================================================
/*!
* GEOM_Displayer::LocalSelection
* Activate selection of CAD shapes with activisation of selection
* of their sub-shapes (with opened local context for OCC viewer)
*/
//=================================================================
void GEOM_Displayer::LocalSelection( const SALOME_ListIO& theIOList, const int theMode )
{
std::list<int> modes;
modes.push_back( theMode );
LocalSelection( theIOList, modes );
}
//=================================================================

View File

@ -186,7 +186,9 @@ public:
bool ToActivate() const;
/* Activate/Deactivate selection*/
void LocalSelection( const Handle(SALOME_InteractiveObject)&, const std::list<int> );
void LocalSelection( const Handle(SALOME_InteractiveObject)&, const int );
void LocalSelection( const SALOME_ListIO& theIOList, const std::list<int> );
void LocalSelection( const SALOME_ListIO& theIOList, const int );
void GlobalSelection( const int = GEOM_ALLOBJECTS, const bool = false );
void GlobalSelection( const TColStd_MapOfInteger&, const bool = false, const QList<int>* = 0 );

View File

@ -202,7 +202,14 @@ void GenerationGUI_FillingDlg::initSelection()
aTypes.Add( GEOM_EDGE );
aTypes.Add( GEOM_WIRE );
aTypes.Add( GEOM_COMPOUND );
std::list<int> needTypes;
needTypes.push_back( TopAbs_EDGE );
needTypes.push_back( TopAbs_WIRE );
needTypes.push_back( TopAbs_COMPOUND );
globalSelection( aTypes );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
@ -232,12 +239,11 @@ void GenerationGUI_FillingDlg::SelectionIntoArgument()
void GenerationGUI_FillingDlg::SetEditCurrentArgument()
{
QPushButton* send = (QPushButton*)sender();
globalSelection(GEOM_ALLSHAPES);
if (send == GroupPoints->PushButton1) {
GroupPoints->LineEdit1->setFocus();
myEditCurrentArgument = GroupPoints->LineEdit1;
globalSelection(GEOM_COMPOUND);
initSelection();
this->SelectionIntoArgument();
}
}
@ -388,3 +394,13 @@ bool GenerationGUI_FillingDlg::execute(ObjectList& objects)
return true;
}
//=================================================================================
// function : addSubshapesToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void GenerationGUI_FillingDlg::addSubshapesToStudy()
{
foreach( GEOM::GeomObjPtr o, myObjects )
GEOMBase::PublishSubObject( o.get() );
}

View File

@ -49,6 +49,7 @@ protected:
virtual GEOM::GEOM_IOperations_ptr createOperation();
virtual bool isValid( QString& );
virtual bool execute( ObjectList& );
virtual void addSubshapesToStudy();
private:
void Init();

View File

@ -136,7 +136,10 @@ void MeasureGUI_AngleDlg::Init()
// init variables
myGrp->LineEdit1->setText("");
myGrp->LineEdit2->setText("");
myObj = myObj2 = GEOM::GEOM_Object::_nil();
myGrp->LineEdit1->setEnabled(true);
myGrp->LineEdit2->setEnabled(false);
myObj.nullify();
myObj2.nullify();
mySelBtn = myGrp->PushButton1;
mySelEdit = myGrp->LineEdit1;
@ -149,7 +152,7 @@ void MeasureGUI_AngleDlg::Init()
connect(mySelEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
connect(mySelBtn2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
globalSelection(GEOM_LINE);
activateSelection();
MeasureGUI_Skeleton::Init();
}
@ -159,15 +162,7 @@ void MeasureGUI_AngleDlg::Init()
//=================================================================================
void MeasureGUI_AngleDlg::SelectionIntoArgument()
{
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
GEOM::GEOM_Object_var aSelectedObject = GEOM::GEOM_Object::_nil();
if (aSelList.Extent() > 0) {
aSelectedObject = GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
}
GEOM::GeomObjPtr aSelectedObject = getSelected( TopAbs_EDGE );
// clear selection
disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
@ -177,12 +172,12 @@ void MeasureGUI_AngleDlg::SelectionIntoArgument()
if (myEditCurrentArgument == mySelEdit) {
myObj = aSelectedObject;
if (!myObj->_is_nil() && myObj2->_is_nil())
if (myObj && !myObj2)
myGrp->PushButton2->click();
}
else {
myObj2 = aSelectedObject;
if (!myObj2->_is_nil() && myObj->_is_nil())
if (myObj2 && !myObj)
myGrp->PushButton1->click();
}
@ -195,8 +190,8 @@ void MeasureGUI_AngleDlg::SelectionIntoArgument()
//=================================================================================
void MeasureGUI_AngleDlg::processObject()
{
myGrp->LineEdit1->setText(!myObj->_is_nil() ? GEOMBase::GetName(myObj ) : "");
myGrp->LineEdit2->setText(!myObj2->_is_nil() ? GEOMBase::GetName(myObj2) : "");
myGrp->LineEdit1->setText(myObj ? GEOMBase::GetName(myObj.get()) : "");
myGrp->LineEdit2->setText(myObj2 ? GEOMBase::GetName(myObj2.get()) : "");
double anAngle = 0.;
if (getParameters(anAngle)) {
@ -220,7 +215,7 @@ bool MeasureGUI_AngleDlg::getParameters (double& theAngle)
if (isValid(msg)) {
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
try {
theAngle = anOper->GetAngle(myObj, myObj2);
theAngle = anOper->GetAngle(myObj.get(), myObj2.get());
}
catch(const SALOME::SALOME_Exception& e) {
SalomeApp_Tools::QtCatchCorbaException(e);
@ -262,7 +257,7 @@ void MeasureGUI_AngleDlg::SetEditCurrentArgument()
}
disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
globalSelection(GEOM_LINE);
activateSelection();
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
@ -304,10 +299,11 @@ void MeasureGUI_AngleDlg::LineEditReturnPressed()
SALOME_Prs* MeasureGUI_AngleDlg::buildPrs()
{
double anAngle = 0.;
myGrp->LineEdit3->setText("");
SUIT_ViewWindow* vw = SUIT_Session::session()->activeApplication()->desktop()->activeWindow();
if (myObj->_is_nil() || myObj2->_is_nil() || !getParameters(anAngle) ||
if (!myObj || !myObj2 || !getParameters(anAngle) ||
vw->getViewManager()->getType() != OCCViewer_Viewer::Type())
return 0;
@ -315,8 +311,8 @@ SALOME_Prs* MeasureGUI_AngleDlg::buildPrs()
try {
OCC_CATCH_SIGNALS;
TopoDS_Shape S1, S2;
if (GEOMBase::GetShape(myObj , S1, TopAbs_EDGE) &&
GEOMBase::GetShape(myObj2, S2, TopAbs_EDGE)) {
if (GEOMBase::GetShape(myObj.get() , S1, TopAbs_EDGE) &&
GEOMBase::GetShape(myObj2.get(), S2, TopAbs_EDGE)) {
TopoDS_Edge anEdge1 = TopoDS::Edge(S1);
TopoDS_Edge anEdge2 = TopoDS::Edge(S2);
@ -399,5 +395,15 @@ SALOME_Prs* MeasureGUI_AngleDlg::buildPrs()
//=================================================================================
bool MeasureGUI_AngleDlg::isValid (QString& msg)
{
return MeasureGUI_Skeleton::isValid(msg) && !myObj2->_is_nil();
return MeasureGUI_Skeleton::isValid(msg) && myObj2;
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_AngleDlg::activateSelection()
{
globalSelection(GEOM_LINE);
localSelection(GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}

View File

@ -52,6 +52,7 @@ protected:
private:
void Init();
bool getParameters( double& );
void activateSelection();
private:
QLineEdit* myEditCurrentArgument;
@ -59,7 +60,7 @@ private:
QPushButton* mySelBtn2;
MeasureGUI_2Sel1LineEdit* myGrp;
GEOM::GEOM_Object_var myObj2;
GEOM::GeomObjPtr myObj2;
};
#endif // MEASUREGUI_ANGLEDLG_H

View File

@ -124,7 +124,7 @@ void MeasureGUI_BndBoxDlg::Init()
this, SLOT(SelectionIntoArgument()));
initName(tr("GEOM_BNDBOX"));
globalSelection();
activateSelection();
SelectionIntoArgument();
}
@ -148,6 +148,7 @@ bool MeasureGUI_BndBoxDlg::ClickOnApply()
return false;
initName();
activateSelection();
return true;
}
@ -162,7 +163,7 @@ void MeasureGUI_BndBoxDlg::ActivateThisDialog()
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
globalSelection();
activateSelection();
redisplayPreview();
}
@ -216,11 +217,11 @@ bool MeasureGUI_BndBoxDlg::getParameters (double& theXmin, double& theXmax,
double& theYmin, double& theYmax,
double& theZmin, double& theZmax)
{
if (myObj->_is_nil())
if (!myObj)
return false;
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow(getOperation());
anOper->GetBoundingBox(myObj, true, theXmin, theXmax, theYmin, theYmax, theZmin, theZmax);
anOper->GetBoundingBox(myObj.get(), true, theXmin, theXmax, theYmin, theYmax, theZmin, theZmax);
return anOper->IsDone();
}
@ -249,28 +250,19 @@ SALOME_Prs* MeasureGUI_BndBoxDlg::buildPrs()
void MeasureGUI_BndBoxDlg::SelectionIntoArgument()
{
myEditCurrentArgument->setText("");
myObj = GEOM::GEOM_Object::_nil();
myObj.nullify();
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_VERTEX << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPSOLID << TopAbs_COMPOUND << TopAbs_SHAPE;
myObj = getSelected( aTypes );
if (aSelList.Extent() != 1) {
if ( !myObj ) {
processObject();
erasePreview();
return;
}
GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(aSelList.First());
if (aSelectedObject->_is_nil()) {
processObject();
erasePreview();
return;
}
myObj = aSelectedObject;
myEditCurrentArgument->setText(GEOMBase::GetName(myObj));
myEditCurrentArgument->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}
@ -290,7 +282,7 @@ GEOM::GEOM_IOperations_ptr MeasureGUI_BndBoxDlg::createOperation()
//=================================================================================
bool MeasureGUI_BndBoxDlg::isValid (QString&)
{
return !myObj->_is_nil();
return myObj;
}
//=================================================================================
@ -300,7 +292,7 @@ bool MeasureGUI_BndBoxDlg::isValid (QString&)
bool MeasureGUI_BndBoxDlg::execute (ObjectList& objects)
{
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow(getOperation());
GEOM::GEOM_Object_var anObj = anOper->MakeBoundingBox(myObj, true);
GEOM::GEOM_Object_var anObj = anOper->MakeBoundingBox(myObj.get(), true);
if (!anObj->_is_nil())
objects.push_back(anObj._retn());
@ -308,6 +300,20 @@ bool MeasureGUI_BndBoxDlg::execute (ObjectList& objects)
return true;
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_BndBoxDlg::activateSelection()
{
globalSelection( GEOM_ALLSHAPES );
std::list<int> needTypes;
needTypes.push_back( TopAbs_SHAPE ), needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE );
needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL );
needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPSOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
// function : redisplayPreview()
// purpose :
@ -337,3 +343,12 @@ void MeasureGUI_BndBoxDlg::redisplayPreview()
catch (...) {
}
}
//=================================================================================
// function : addSubshapeToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void MeasureGUI_BndBoxDlg::addSubshapesToStudy()
{
GEOMBase::PublishSubObject( myObj.get() );
}

View File

@ -48,7 +48,7 @@ protected:
virtual GEOM::GEOM_IOperations_ptr createOperation();
virtual bool isValid (QString&);
virtual bool execute (ObjectList&);
virtual void addSubshapesToStudy();
void redisplayPreview();
virtual void processObject();
virtual SALOME_Prs* buildPrs();
@ -56,10 +56,11 @@ protected:
private:
void Init();
void enterEvent (QEvent*);
void activateSelection();
bool getParameters (double&, double&, double&, double&, double&, double&);
private:
GEOM::GEOM_Object_var myObj;
GEOM::GeomObjPtr myObj;
MeasureGUI_1Sel6LineEdit* myGrp;
private slots:

View File

@ -120,10 +120,23 @@ void MeasureGUI_CenterMassDlg::Init()
SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
initName( tr( "GEOM_POINT") );
globalSelection();
activateSelection();
SelectionIntoArgument();
}
//=================================================================================
// function : activateSelection
// purpose :
//=================================================================================
void MeasureGUI_CenterMassDlg::activateSelection()
{
globalSelection( GEOM_ALLSHAPES );
std::list<int> needTypes;
needTypes.push_back( TopAbs_SHAPE ), needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE );
needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL );
needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPSOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
// function : ClickOnOk()
@ -146,6 +159,7 @@ bool MeasureGUI_CenterMassDlg::ClickOnApply()
return false;
initName();
activateSelection();
return true;
// myMeasureGUI->MakeCDGAndDisplay( myGeomShape );
@ -159,26 +173,17 @@ bool MeasureGUI_CenterMassDlg::ClickOnApply()
void MeasureGUI_CenterMassDlg::SelectionIntoArgument()
{
erasePreview();
myObj = GEOM::GEOM_Object::_nil();
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
myObj.nullify();
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_VERTEX << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPSOLID << TopAbs_COMPOUND << TopAbs_SHAPE;
myObj = getSelected( aTypes );
if (aSelList.Extent() != 1) {
if ( !myObj ) {
processObject();
return;
}
GEOM::GEOM_Object_var aSelectedObject =
GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
if ( aSelectedObject->_is_nil() ) {
processObject();
return;
}
myObj = aSelectedObject;
processObject();
displayPreview(true);
}
@ -220,7 +225,7 @@ void MeasureGUI_CenterMassDlg::ActivateThisDialog()
connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
SIGNAL(currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
globalSelection();
activateSelection();
displayPreview(true);
}
@ -230,7 +235,7 @@ void MeasureGUI_CenterMassDlg::ActivateThisDialog()
//=================================================================================
void MeasureGUI_CenterMassDlg::processObject()
{
if ( myObj->_is_nil() ) {
if ( !myObj ) {
myGrp->LineEdit1->setText( "" );
myGrp->LineEdit2->setText( "" );
myGrp->LineEdit3->setText( "" );
@ -242,7 +247,7 @@ void MeasureGUI_CenterMassDlg::processObject()
getParameters( x, y, z );
myGrp->LineEdit1->setText( GEOMBase::GetName( myObj ) );
myGrp->LineEdit1->setText( GEOMBase::GetName( myObj.get() ) );
SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
int aPrecision = resMgr->integerValue( "Geometry", "length_precision", 6 );
@ -280,7 +285,7 @@ GEOM::GEOM_IOperations_ptr MeasureGUI_CenterMassDlg::createOperation()
//=================================================================================
bool MeasureGUI_CenterMassDlg::isValid( QString& )
{
return !myObj->_is_nil();
return myObj;
}
//=================================================================================
@ -289,12 +294,12 @@ bool MeasureGUI_CenterMassDlg::isValid( QString& )
//=================================================================================
bool MeasureGUI_CenterMassDlg::getParameters( double& theX, double& theY, double& theZ )
{
if ( myObj->_is_nil() )
if ( !myObj )
return false;
else {
try {
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
GEOM::GEOM_Object_var anObj = anOper->GetCentreOfMass( myObj );
GEOM::GEOM_Object_var anObj = anOper->GetCentreOfMass( myObj.get() );
if ( !anOper->IsDone() )
return false;
@ -328,10 +333,19 @@ bool MeasureGUI_CenterMassDlg::getParameters( double& theX, double& theY, double
bool MeasureGUI_CenterMassDlg::execute( ObjectList& objects )
{
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
GEOM::GEOM_Object_var anObj = anOper->GetCentreOfMass( myObj );
GEOM::GEOM_Object_var anObj = anOper->GetCentreOfMass( myObj.get() );
if ( !anObj->_is_nil() )
objects.push_back( anObj._retn() );
return true;
}
//=================================================================================
// function : addSubshapeToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void MeasureGUI_CenterMassDlg::addSubshapesToStudy()
{
GEOMBase::PublishSubObject( myObj.get() );
}

View File

@ -47,6 +47,7 @@ protected:
// redefined from GEOMBase_Helper
virtual GEOM::GEOM_IOperations_ptr createOperation();
virtual bool isValid( QString& );
virtual void addSubshapesToStudy();
virtual bool execute( ObjectList& );
private slots:
@ -61,10 +62,11 @@ private:
void Init();
void enterEvent( QEvent* );
void processObject();
void activateSelection();
bool getParameters( double&, double&, double& );
private:
GEOM::GEOM_Object_var myObj;
GEOM::GeomObjPtr myObj;
MeasureGUI_1Sel3LineEdit* myGrp;
};

View File

@ -128,6 +128,12 @@ void MeasureGUI_DistanceDlg::Init()
myEditCurrentArgument = myGrp->LineEdit1;
myDbls = new GEOM::ListOfDouble();
myGrp->LineEdit1->setEnabled(true);
myGrp->LineEdit2->setEnabled(false);
myObj1.nullify();
myObj2.nullify();
// signals and slots connections
connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
connect(buttonApply(), SIGNAL(clicked()), this, SLOT(ClickOnApply()));
@ -140,7 +146,7 @@ void MeasureGUI_DistanceDlg::Init()
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
globalSelection();
activateSelection();
SelectionIntoArgument();
}
@ -164,6 +170,7 @@ bool MeasureGUI_DistanceDlg::ClickOnApply()
return false;
initName();
activateSelection();
return true;
}
@ -178,7 +185,7 @@ void MeasureGUI_DistanceDlg::ActivateThisDialog()
connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
this, SLOT(SelectionIntoArgument()));
globalSelection();
activateSelection();
redisplayPreview();
}
@ -230,15 +237,9 @@ void MeasureGUI_DistanceDlg::SolutionSelected (int i)
//=================================================================================
void MeasureGUI_DistanceDlg::SelectionIntoArgument()
{
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
GEOM::GEOM_Object_var aSelectedObject = GEOM::GEOM_Object::_nil();
if (aSelList.Extent() > 0) {
aSelectedObject = GEOMBase::ConvertIOinGEOMObject(aSelList.First());
}
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_VERTEX << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPSOLID << TopAbs_COMPOUND << TopAbs_SHAPE;
GEOM::GeomObjPtr aSelectedObject = getSelected( aTypes );
// clear selection
disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
@ -248,12 +249,12 @@ void MeasureGUI_DistanceDlg::SelectionIntoArgument()
if (myEditCurrentArgument == myGrp->LineEdit1) {
myObj1 = aSelectedObject;
if (!myObj1->_is_nil() && myObj2->_is_nil())
if (myObj1 && !myObj2)
myGrp->PushButton2->click();
}
else {
myObj2 = aSelectedObject;
if (!myObj2->_is_nil() && myObj1->_is_nil())
if (myObj2 && !myObj1)
myGrp->PushButton1->click();
}
@ -297,8 +298,8 @@ void MeasureGUI_DistanceDlg::SetEditCurrentArgument()
//=================================================================================
void MeasureGUI_DistanceDlg::processObject()
{
myGrp->LineEdit1->setText(!myObj1->_is_nil() ? GEOMBase::GetName(myObj1) : "");
myGrp->LineEdit2->setText(!myObj2->_is_nil() ? GEOMBase::GetName(myObj2) : "");
myGrp->LineEdit1->setText(myObj1 ? GEOMBase::GetName(myObj1.get()) : "");
myGrp->LineEdit2->setText(myObj2 ? GEOMBase::GetName(myObj2.get()) : "");
myGrp->ComboBox1->clear();
myDbls->length(0);
@ -311,7 +312,7 @@ void MeasureGUI_DistanceDlg::processObject()
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow(getOperation());
try {
nbSols = anOper->ClosestPoints(myObj1, myObj2, myDbls);
nbSols = anOper->ClosestPoints(myObj1.get(), myObj2.get(), myDbls);
}
catch (const SALOME::SALOME_Exception& e) {
SalomeApp_Tools::QtCatchCorbaException(e);
@ -340,7 +341,7 @@ SALOME_Prs* MeasureGUI_DistanceDlg::buildPrs()
int currSol = myGrp->ComboBox1->currentIndex();
if (myObj1->_is_nil() || myObj2->_is_nil() ||
if (!myObj1 || !myObj2 ||
currSol == -1 || (currSol+1)*6 > myDbls->length() ||
vw->getViewManager()->getType() != OCCViewer_Viewer::Type())
return 0;
@ -424,7 +425,7 @@ GEOM::GEOM_IOperations_ptr MeasureGUI_DistanceDlg::createOperation()
//=================================================================================
bool MeasureGUI_DistanceDlg::isValid (QString& msg)
{
return !myObj1->_is_nil() && !myObj2->_is_nil();
return myObj1 && myObj2;
}
//=================================================================================
@ -437,7 +438,7 @@ bool MeasureGUI_DistanceDlg::execute (ObjectList& objects)
GEOM::GEOM_IBasicOperations_var aBasicOper = getGeomEngine()->GetIBasicOperations(getStudyId());
GEOM::ListOfDouble_var aDbls;
int nbSols = anOper->ClosestPoints(myObj1, myObj2, aDbls);
int nbSols = anOper->ClosestPoints(myObj1.get(), myObj2.get(), aDbls);
if (anOper->IsDone()) {
bool doPublishAll = true;
@ -482,6 +483,20 @@ bool MeasureGUI_DistanceDlg::execute (ObjectList& objects)
return true;
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_DistanceDlg::activateSelection()
{
globalSelection( GEOM_ALLSHAPES );
std::list<int> needTypes;
needTypes.push_back( TopAbs_SHAPE ), needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE );
needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL );
needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPSOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
// function : redisplayPreview()
// purpose :
@ -517,11 +532,21 @@ void MeasureGUI_DistanceDlg::redisplayPreview()
QString MeasureGUI_DistanceDlg::getNewObjectName (int currObj) const
{
QString aName = tr("GEOM_MINDIST_NAME") + QString("_%1_").arg((currObj+1)/2);
aName += GEOMBase::GetName(currObj%2 ? myObj1 : myObj2);
aName += GEOMBase::GetName(currObj%2 ? myObj1.get() : myObj2.get());
return aName;
}
//=================================================================================
// function : addSubshapeToStudy
// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
void MeasureGUI_DistanceDlg::addSubshapesToStudy()
{
GEOMBase::PublishSubObject( myObj1.get() );
GEOMBase::PublishSubObject( myObj2.get() );
}
//=================================================================================
// function : MeasureGUI_DistanceGroup
// purpose :

View File

@ -99,6 +99,7 @@ protected:
virtual GEOM::GEOM_IOperations_ptr createOperation();
virtual bool isValid (QString&);
virtual bool execute (ObjectList&);
virtual void addSubshapesToStudy();
virtual QString getNewObjectName (int CurrObj = -1) const;
void redisplayPreview();
@ -108,10 +109,11 @@ protected:
private:
void Init();
void enterEvent (QEvent*);
void activateSelection();
private:
GEOM::GEOM_Object_var myObj1;
GEOM::GEOM_Object_var myObj2;
GEOM::GeomObjPtr myObj1;
GEOM::GeomObjPtr myObj2;
MeasureGUI_DistanceGroup* myGrp;
GEOM::ListOfDouble_var myDbls;

View File

@ -122,6 +122,19 @@ void MeasureGUI_InertiaDlg::Init()
MeasureGUI_Skeleton::Init();
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_InertiaDlg::activateSelection()
{
MeasureGUI_Skeleton::activateSelection();
std::list<int> needTypes;
needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL ), needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
// function : processObject
// purpose :
@ -176,13 +189,13 @@ void MeasureGUI_InertiaDlg::processObject()
bool MeasureGUI_InertiaDlg::getParameters( gp_Mat& I,
gp_XYZ& theIXYZ )
{
if ( myObj->_is_nil() )
if ( !myObj )
return false;
else {
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
try {
double x, y, z;
anOper->GetInertia( myObj,
anOper->GetInertia( myObj.get(),
I( 1, 1 ), I( 1, 2 ), I( 1, 3 ),
I( 2, 1 ), I( 2, 2 ), I( 2, 3 ),
I( 3, 1 ), I( 3, 2 ), I( 3, 3 ),
@ -198,3 +211,22 @@ bool MeasureGUI_InertiaDlg::getParameters( gp_Mat& I,
return anOper->IsDone();
}
}
void MeasureGUI_InertiaDlg::SelectionIntoArgument()
{
myObj.nullify();
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_VERTEX << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPSOLID << TopAbs_COMPOUND << TopAbs_SHAPE;
myObj = getSelected( aTypes );
if (!myObj) {
mySelEdit->setText("");
processObject();
erasePreview();
return;
}
mySelEdit->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}

View File

@ -49,6 +49,8 @@ public:
protected:
// redefined from GEOMBase_Helper and MeasureGUI_Skeleton
virtual void processObject();
virtual void activateSelection();
virtual void SelectionIntoArgument();
private:
void Init();

View File

@ -26,6 +26,7 @@
//
#include "MeasureGUI_MaxToleranceDlg.h"
#include "MeasureGUI_Widgets.h"
#include <GEOMBase.h>
#include "DlgRef.h"
#include <SUIT_Session.h>
@ -163,7 +164,7 @@ bool MeasureGUI_MaxToleranceDlg::getParameters( double& theMinFaceToler,
else {
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
try {
anOper->GetTolerance( myObj,
anOper->GetTolerance( myObj.get(),
theMinFaceToler, theMaxFaceToler, theMinEdgeToler,
theMaxEdgeToler, theMinVertexToler, theMaxVertexToler );
}
@ -175,3 +176,35 @@ bool MeasureGUI_MaxToleranceDlg::getParameters( double& theMinFaceToler,
return anOper->IsDone();
}
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_MaxToleranceDlg::activateSelection()
{
globalSelection( GEOM_ALLSHAPES );
std::list<int> needTypes;
needTypes.push_back( TopAbs_SHAPE ), needTypes.push_back( TopAbs_EDGE );
needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL );
needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPSOLID ), needTypes.push_back( TopAbs_COMPOUND ); localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
void MeasureGUI_MaxToleranceDlg::SelectionIntoArgument()
{
myObj.nullify();
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPSOLID << TopAbs_COMPOUND << TopAbs_SHAPE;
myObj = getSelected( aTypes );
if (!myObj) {
mySelEdit->setText("");
processObject();
erasePreview();
return;
}
mySelEdit->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}

View File

@ -46,9 +46,11 @@ public:
protected:
// redefined from GEOMBase_Helper and MeasureGUI_Skeleton
virtual void processObject();
virtual void SelectionIntoArgument();
private:
void Init();
void activateSelection();
bool getParameters( double&, double&, double&,
double&, double&, double& );

View File

@ -122,7 +122,7 @@ void MeasureGUI_PointDlg::activateSelection()
void MeasureGUI_PointDlg::SelectionIntoArgument()
{
try {
myObj = GEOM::GEOM_Object::_nil();
myObj.nullify();
myGrp->LineEdit1->setText( "" );
myGrp->LineEdit2->setText( "" );
myGrp->LineEdit3->setText( "" );
@ -135,23 +135,20 @@ void MeasureGUI_PointDlg::SelectionIntoArgument()
if (aSelList.Extent() < 1)
return;
GEOM::GEOM_Object_var aSelectedObject =
GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
myObj = GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
if ( aSelectedObject->_is_nil() )
if ( !myObj )
return;
myObj = aSelectedObject;
TColStd_IndexedMapOfInteger anIndexes;
aSelMgr->GetIndexes(aSelList.First(), anIndexes);
TopoDS_Shape aShape;
if ( anIndexes.Extent() > 1 || !GEOMBase::GetShape( myObj, aShape ) || aShape.IsNull() )
if ( anIndexes.Extent() > 1 || !GEOMBase::GetShape( myObj.get(), aShape ) || aShape.IsNull() )
return;
TopoDS_Vertex aPoint;
QString aName = GEOMBase::GetName( myObj );
QString aName = GEOMBase::GetName( myObj.get() );
if ( anIndexes.Extent() == 0 ) {
if ( aShape.ShapeType() == TopAbs_VERTEX )
aPoint = TopoDS::Vertex( aShape );
@ -180,7 +177,7 @@ void MeasureGUI_PointDlg::SelectionIntoArgument()
}
catch( ... )
{
myObj = GEOM::GEOM_Object::_nil();
myObj.nullify();
myGrp->LineEdit1->setText( "" );
myGrp->LineEdit2->setText( "" );
myGrp->LineEdit3->setText( "" );

View File

@ -122,8 +122,30 @@ void MeasureGUI_PropertiesDlg::activateSelection()
}
globalSelection( aTypes );
std::list<int> needTypes;
needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL ), needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
void MeasureGUI_PropertiesDlg::SelectionIntoArgument()
{
myObj.nullify();
QList<TopAbs_ShapeEnum> aTypes;
aTypes << TopAbs_EDGE << TopAbs_WIRE << TopAbs_FACE << TopAbs_SHELL << TopAbs_SOLID << TopAbs_COMPOUND;
myObj = getSelected( aTypes );
if (!myObj) {
mySelEdit->setText("");
processObject();
erasePreview();
return;
}
mySelEdit->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}
//=================================================================================
// function : processObject
// purpose :
@ -155,12 +177,12 @@ bool MeasureGUI_PropertiesDlg::getParameters( double& theLength,
double& theArea,
double& theVolume )
{
if ( myObj->_is_nil() )
if ( !myObj )
return false;
else {
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
try {
anOper->GetBasicProperties( myObj, theLength, theArea, theVolume );
anOper->GetBasicProperties( myObj.get(), theLength, theArea, theVolume );
}
catch( const SALOME::SALOME_Exception& e ) {
SalomeApp_Tools::QtCatchCorbaException( e );
@ -180,8 +202,8 @@ SALOME_Prs* MeasureGUI_PropertiesDlg::buildPrs()
SALOME_Prs* prs = 0;
TopoDS_Shape shape;
if ( GEOMBase::GetShape( myObj, shape, TopAbs_EDGE ) &&
getDisplayer()->IsDisplayed( GEOMBase::GetEntry(myObj) ) ) {
if ( GEOMBase::GetShape( myObj.get(), shape, TopAbs_EDGE ) &&
getDisplayer()->IsDisplayed( GEOMBase::GetEntry(myObj.get()) ) ) {
shape = GEOMBase::CreateArrowForLinearEdge( shape );
if ( !shape.IsNull() )
prs = getDisplayer()->BuildPrs( shape );

View File

@ -48,6 +48,7 @@ protected:
// redefined from GEOMBase_Helper and MeasureGUI_Skeleton
virtual void processObject();
virtual void activateSelection();
virtual void SelectionIntoArgument();
virtual SALOME_Prs* buildPrs();
private:

View File

@ -245,27 +245,24 @@ void MeasureGUI_Skeleton::SetEditCurrentArgument()
//=================================================================================
void MeasureGUI_Skeleton::SelectionIntoArgument()
{
myObj = GEOM::GEOM_Object::_nil();
myObj.nullify();
LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
GEOM::GEOM_Object_var aSelectedObject = GEOM::GEOM_Object::_nil();
if (aSelList.Extent() > 0) {
aSelectedObject = GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
myObj = GEOMBase::ConvertIOinGEOMObject( aSelList.First() );
}
if (aSelectedObject->_is_nil()) {
if ( !myObj ) {
mySelEdit->setText("");
processObject();
erasePreview();
return;
}
myObj = aSelectedObject;
mySelEdit->setText(GEOMBase::GetName(myObj));
mySelEdit->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}
@ -356,7 +353,7 @@ void MeasureGUI_Skeleton::activateSelection()
//=================================================================================
bool MeasureGUI_Skeleton::isValid( QString& )
{
return !myObj->_is_nil();
return myObj;
}
//================================================================

View File

@ -77,7 +77,7 @@ protected:
protected:
QPushButton* mySelBtn;
QLineEdit* mySelEdit;
GEOM::GEOM_Object_var myObj;
GEOM::GeomObjPtr myObj;
GeometryGUI* myGeomGUI;
GEOM_Displayer* myDisplayer;

View File

@ -187,6 +187,18 @@ void MeasureGUI_WhatisDlg::processObject()
myParamsDlg->adjustSize();
}
//=================================================================================
// function : activateSelection()
// purpose :
//=================================================================================
void MeasureGUI_WhatisDlg::activateSelection()
{
MeasureGUI_Skeleton::activateSelection();
std::list<int> needTypes;
needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE ), needTypes.push_back( TopAbs_FACE ), needTypes.push_back( TopAbs_SHELL ), needTypes.push_back( TopAbs_SOLID ), needTypes.push_back( TopAbs_COMPOUND );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
}
//=================================================================================
// function : ClickOnProperties()
// purpose :
@ -202,13 +214,13 @@ void MeasureGUI_WhatisDlg::ClickOnProperties()
//=================================================================================
bool MeasureGUI_WhatisDlg::getParameters( QString& theText )
{
if ( myObj->_is_nil() )
if ( !myObj )
return false;
GEOM::GEOM_IMeasureOperations_var anOper = GEOM::GEOM_IMeasureOperations::_narrow( getOperation() );
try
{
theText = anOper->WhatIs( myObj );
theText = anOper->WhatIs( myObj.get() );
}
catch( const SALOME::SALOME_Exception& e )
{
@ -231,7 +243,7 @@ QString MeasureGUI_WhatisDlg::getKindOfShape( QString& theParameters )
SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
int aLenPrecision = resMgr->integerValue( "Geometry", "length_precision", 6 );
if ( myObj->_is_nil() )
if ( !myObj )
return aKindStr;
GEOM::GEOM_IKindOfShape::shape_kind aKind;
@ -242,7 +254,7 @@ QString MeasureGUI_WhatisDlg::getKindOfShape( QString& theParameters )
try
{
aKind = anOper->KindOfShape( myObj, anInts, aDbls );
aKind = anOper->KindOfShape( myObj.get(), anInts, aDbls );
}
catch( const SALOME::SALOME_Exception& e ) {
SalomeApp_Tools::QtCatchCorbaException( e );
@ -601,3 +613,20 @@ QString MeasureGUI_WhatisDlg::getKindOfShape( QString& theParameters )
return aKindStr;
}
void MeasureGUI_WhatisDlg::SelectionIntoArgument()
{
myObj.nullify();
myObj = getSelected( TopAbs_SHAPE );
if (!myObj) {
mySelEdit->setText("");
processObject();
erasePreview();
return;
}
mySelEdit->setText(GEOMBase::GetName(myObj.get()));
processObject();
redisplayPreview();
}

View File

@ -48,6 +48,8 @@ public:
protected:
// redefined from GEOMBase_Helper and MeasureGUI_Skeleton
virtual void processObject();
virtual void activateSelection();
virtual void SelectionIntoArgument();
protected slots:
virtual void ClickOnProperties();

View File

@ -237,6 +237,9 @@ void TransformationGUI_ProjectionDlg::SetEditCurrentArgument()
aMap.Add( GEOM_EDGE );
aMap.Add( GEOM_WIRE );
globalSelection( aMap );
std::list<int> needTypes;
needTypes.push_back( TopAbs_VERTEX ), needTypes.push_back( TopAbs_EDGE ), needTypes.push_back( TopAbs_WIRE );
localSelection(GEOM::GEOM_Object::_nil(), needTypes );
break;
}
case PROJ_ON_WIRE: