CMakeLists.txt

@@ -38,20 +38,9 @@ ENDIF()
 
 # Versioning
 # ===========
-SALOME_SETUP_VERSION(9.13.0)
+SALOME_SETUP_VERSION(9.12.0)
 MESSAGE(STATUS "Building ${PROJECT_NAME_UC} ${${PROJECT_NAME_UC}_VERSION} from \"${${PROJECT_NAME_UC}_GIT_SHA1}\"")
 
-# Find SalomeBootstrap
-# ===========
-SET(SALOMEBOOTSTRAP_ROOT_DIR $ENV{SALOMEBOOTSTRAP_ROOT_DIR} CACHE PATH "Path to the Salome Bootstrap")
-IF(EXISTS ${SALOMEBOOTSTRAP_ROOT_DIR})
-  FIND_PACKAGE(SalomeBootstrap REQUIRED)
-  ADD_DEFINITIONS(${SALOMEBOOTSTRAP_DEFINITIONS})
-  INCLUDE_DIRECTORIES(${SALOMEBOOTSTRAP_INCLUDE_DIRS})
-ELSE(EXISTS ${SALOMEBOOTSTRAP_ROOT_DIR})
-  MESSAGE(FATAL_ERROR "We absolutely need a Salome Bootstrap, please define SALOMEBOOTSTRAP_ROOT_DIR")
-ENDIF(EXISTS ${SALOMEBOOTSTRAP_ROOT_DIR})
-
 # Find KERNEL
 # ===========
 SET(KERNEL_ROOT_DIR $ENV{KERNEL_ROOT_DIR} CACHE PATH "Path to the Salome KERNEL")
@@ -151,13 +140,6 @@ ENDIF(SALOME_BUILD_GUI)
 
 FIND_PACKAGE(SalomeOpenCASCADE REQUIRED)
 
-SET(CommonGeomLib_ROOT_DIR $ENV{CommonGeomLib_ROOT_DIR} CACHE PATH "Path to the CommonGeomLib tool")
-IF(EXISTS ${CommonGeomLib_ROOT_DIR})
-  FIND_PACKAGE(SalomeCommonGeomLib REQUIRED)
-ELSE(EXISTS ${CommonGeomLib_ROOT_DIR})
-  MESSAGE(FATAL_ERROR "We absolutely need the CommonGeomLib tool, please define CommonGeomLib_ROOT_DIR !")
-ENDIF(EXISTS ${CommonGeomLib_ROOT_DIR})
-
 IF(SALOME_GEOM_USE_VTK)
   FIND_PACKAGE(SalomeVTK REQUIRED)
   ADD_DEFINITIONS(-DWITH_VTK)
@@ -297,21 +279,19 @@ EXPORT(TARGETS ${_${PROJECT_NAME}_exposed_targets}
 SET(KERNEL_ROOT_DIR "${KERNEL_ROOT_DIR}")
 SET(GUI_ROOT_DIR "${GUI_ROOT_DIR}")
 SET(OPENCASCADE_ROOT_DIR "${OPENCASCADE_ROOT_DIR}")
-SET(CommonGeomLib_ROOT_DIR "${CommonGeomLib_ROOT_DIR}")
 SET(VTK_ROOT_DIR "${VTK_ROOT_DIR}")
 SET(OPENCV_ROOT_DIR "${OPENCV_ROOT_DIR}")
 
 SET(CONF_INCLUDE_DIRS "${PROJECT_SOURCE_DIR}/include" "${PROJECT_BINARY_DIR}/include")
 
 # Build variables that will be expanded when configuring Salome<MODULE>Config.cmake:
-SALOME_CONFIGURE_PREPARE(OpenCV OpenCASCADE CommonGeomLib VTK)
+SALOME_CONFIGURE_PREPARE(OpenCV OpenCASCADE VTK)
 
 CONFIGURE_PACKAGE_CONFIG_FILE(${PROJECT_NAME}Config.cmake.in
     ${PROJECT_BINARY_DIR}/${PROJECT_NAME}Config.cmake
     INSTALL_DESTINATION "${SALOME_INSTALL_CMAKE_LOCAL}"
     PATH_VARS CONF_INCLUDE_DIRS SALOME_INSTALL_CMAKE_LOCAL CMAKE_INSTALL_PREFIX
-    KERNEL_ROOT_DIR GUI_ROOT_DIR OPENCASCADE_ROOT_DIR CommonGeomLib_ROOT_DIR
-    VTK_ROOT_DIR OPENCV_ROOT_DIR)
+    KERNEL_ROOT_DIR GUI_ROOT_DIR OPENCASCADE_ROOT_DIR VTK_ROOT_DIR OPENCV_ROOT_DIR)
 
 #   - in the install tree (VSR 16/08/2013: TEMPORARILY COMMENT THIS - TO REMOVE?):
 #       Get the relative path of the include directory so

README

@@ -38,7 +38,7 @@ site:
 
 * Check Release Notes and Software Requirements of the latest SALOME release at
 
-  <https://github.com/SalomePlatform/.github/wiki/SAT/>
+  <https://www.salome-platform.org/?page_id=15/>
 
 Note: SALOME Geometry module needs SALOME KERNEL and SALOME GUI as
 pre-requisites.

doc/salome/examples/check_bop.py

@@ -1,56 +0,0 @@
-# ExtractBOPFailure example
-
-import math
-import salome
-salome.salome_init()
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-### Prepare shapes for Partition
-OX = geompy.MakeVectorDXDYDZ(1, 0, 0, theName="OX")
-OY = geompy.MakeVectorDXDYDZ(0, 1, 0, theName="OY")
-OZ = geompy.MakeVectorDXDYDZ(0, 0, 1, theName="OZ")
-
-Vertex_1 = geompy.MakeVertex(0, 0, 0, theName="Vertex_1")
-Vertex_2 = geompy.MakeVertex(10, 0, 0, theName="Vertex_2")
-Vertex_3 = geompy.MakeVertex(0, 0.005, 0, theName="Vertex_3")
-Vertex_4 = geompy.MakeVertex(10, 0.015, 0, theName="Vertex_4")
-Vertex_5 = geompy.MakeVertex(0, 0.02, 0, theName="Vertex_5")
-Vertex_6 = geompy.MakeVertex(10, 0.02, 0, theName="Vertex_6")
-
-Line_1 = geompy.MakeLineTwoPnt(Vertex_1, Vertex_2, theName="Line_1")
-Line_2 = geompy.MakeLineTwoPnt(Vertex_3, Vertex_4, theName="Line_2")
-Line_3 = geompy.MakeLineTwoPnt(Vertex_5, Vertex_6, theName="Line_3")
-
-Extrusion_1 = geompy.MakePrismVecH(Line_1, OY,  1, theName="Extrusion_1")
-Extrusion_2 = geompy.MakePrismVecH(Line_2, OZ,  1, theName="Extrusion_2")
-Extrusion_3 = geompy.MakePrismVecH(Line_3, OY, -1, theName="Extrusion_3")
-
-Limit_tolerance_1 = geompy.LimitTolerance(Extrusion_2, 0.01, theName="Limit_tolerance_1")
-
-Extrusion_4 = geompy.MakePrismVecH(Extrusion_1, OZ, -1, theName="Extrusion_4")
-Extrusion_5 = geompy.MakePrismVecH(Extrusion_3, OZ, -1, theName="Extrusion_5")
-
-Revolution_1 = geompy.MakeRevolution(Limit_tolerance_1, OX, 45*math.pi/180.0, theName="Revolution_1")
-
-### Try Partition
-try :
-  Partition_1 = geompy.MakePartition([Extrusion_4, Extrusion_5, Revolution_1], [], [], [], geompy.ShapeType["SOLID"], 0, [], 0, theName="Partition_1")
-except :
-  print("EXCEPTION: Partition problem")
-
-### Extract failures
-(IsValid, ShapeRes, ShapeErrors) = geompy.ExtractBOPFailure([Extrusion_4, Extrusion_5, Revolution_1], theTimer=True, theVerbose=True, theName="InvalidBOPResult")
-
-### Publish incriminated sub-shapes (reflect errors in their names)
-for shapeError in ShapeErrors:
-  list_ids = shapeError.incriminated
-  list_subs = geompy.SubShapes(ShapeRes, list_ids)
-  ii = 1
-  for subshape in list_subs:
-    geompy.addToStudyInFather( ShapeRes, subshape, 'SubShape_with_%s_%d'%(str(shapeError.error),ii) )
-    ii = ii+1
-
-if salome.sg.hasDesktop():
-  salome.sg.updateObjBrowser()

doc/salome/examples/tests.set

@@ -58,8 +58,6 @@ SET(GOOD_TESTS
   check_compound_of_blocks.py
   check_self_intersections.py
   check_shape.py
-  check_conformity.py
-  check_bop.py
   complex_objs_ex01.py
   complex_objs_ex02.py
   complex_objs_ex03.py

doc/salome/examples/transformation_operations_ex06.py

@@ -13,17 +13,14 @@ box = geompy.MakeBox(20, 20, 20, 200, 200, 200)
 # create a new object as offset of the given object
 offset  = geompy.MakeOffset(box, 70.)
 offset2 = geompy.MakeOffsetIntersectionJoin(box, 70.)
-offset3 = geompy.MakeOffsetPartial(box, 70., [13, 33])
 
 # add objects in the study
 id_box = geompy.addToStudy(box, "Box")
 id_offset = geompy.addToStudy(offset, "Offset")
 id_offset2 = geompy.addToStudy(offset2, "Offset_intersection_join")
-id_offset3 = geompy.addToStudy(offset3, "Offset_Partial")
 
 # display the results
 gg.createAndDisplayGO(id_box)
 gg.setDisplayMode(id_box,1)
 gg.createAndDisplayGO(id_offset)
 gg.createAndDisplayGO(id_offset2)
-gg.createAndDisplayGO(id_offset3)

doc/salome/gui/GEOM/input/check_bop.doc

@@ -1,32 +0,0 @@
-/*! 
-
-\page check_bop_page Extract BOP Failure
-
-The Extract BOP Failure tool makes it possible to analyse a BOP or Partition failure, in case the result is invalid. \n
-It performs the general fuse BOP and returns the resulting shape and the list of errors from Check Shape point of view.
-
-This is a TUI-only functionality.
-
-<b>TUI Command:</b>
-
-<UL>
-
-<LI> 
-<em>(IsValid, ShapeRes, ShapeErrors) = geompy.ExtractBOPFailure(theShapes, theTimer=False, theTopo=False, theParallel=False, theExact=False, theVerbose=True),</em> \n
-where \n
-\em theShapes is the list of argument shapes for BOP. \n
-\em theTimer - if True, the time of the operation is measured. \n
-\em theTopo - if True, only the topological entities will be checked, otherwise geometry and topology are checked. \n
-\em theParallel - if True, the operation will be executed in parallel. \n
-\em theExact - if True, an exact check will be performed. \n
-\em theVerbose - if True, prints execution errors and check results. \n
-\em Returns: \n
-\em IsValid - a boolean value (whether result shape is valid or not) \n
-\em ShapeRes - the result shape itself \n
-\em ShapeErrors - the list of GEOM.GEOM_IMeasureOperations.ShapeError \n
-</LI>
-
-</UL>
-See also a \ref tui_check_bop_page "TUI example".
-
-*/

doc/salome/gui/GEOM/input/creating_ellipse.doc

@@ -19,10 +19,14 @@ corresponds to OX axis of the global coordinate system.
 <EM> Vmaj' = (Vn * Vmaj) * Vn</em>, where \em Vn is a normal vector and
 \em Vmaj is an original vector of the major axis.
 
-\n <b>TUI Command (without the major axis):</b> <em>geompy.MakeEllipse(Point, Vector, RadiusMajor, RadiusMinor, VectorMajor=None)</em>
+\n <b>TUI Command (without the major axis):</b> <em>geompy.MakeEllipse(Point, Vector, RadiusMajor, RadiusMinor)</em>
 \n <b>Arguments:</b> Name + 1 vertex (for the center) + 1 edge (for
-the direction) + 1 X Radius + 1 Y Radius + 1 optional edge (for the major axis direction).
-\n If the <b>VectorMajor</b> argument is omitted, the ellipse's major axis will be along the X-axis.
+the direction) + 1 X Radius + 1 Y Radius.
+
+\n <b>TUI Command (with the major axis):</b> <em>geompy.MakeEllipseVec(Point, Vector, RadiusMajor, RadiusMinor, VectorMajor)</em>
+\n <b>Arguments:</b> Name + 1 vertex (for the center) + 1 edge (for
+the normal direction) + 1 X Radius + 1 Y Radius + 1 edge (for the
+major axis direction).
 
 \image html ellipse.png
 

doc/salome/gui/GEOM/input/creating_sphere.doc

@@ -8,22 +8,22 @@
 \n The \b Result of each operation will be a GEOM_Object (SOLID).
 
 \n Firstly, you can define a \b Sphere by the <b>Center Point</b> and the \b Radius.
+\n <b>TUI Command:</b> <em>geompy.MakeSphere(Point, Radius)</em>
 \n <b>Arguments:</b> Name + 1 vertex + 1 value (Radius).
-\n <b>TUI Command:</b> <em>geompy.MakeSpherePntR(Point, Radius)</em>
 
 \image html sphere1.png
 
 \n Secondly, you can define a \b Sphere with the center at the origin of
 coordinate system by the \b Radius.
-\n <b>Arguments:</b> Name + 1 value (Radius).
-\n <b>TUI Command:</b> <em>geompy.MakeSphereR(Radius)</em>
+\n <b>TUI Command:</b> <em>geompy. MakeSphereR(Radius)</em>
+\n <b>Arguments:</b> Name + 1 value (Radius from the origin).
 
 \image html sphere2.png
 
 \n <b>NB!</b> The is another way to create a \b Sphere, which is
 currently accessible only via \b TUI commands.
 \n You can define the \b Sphere by the coordinates of the <b>Center
-Point</b> and its \b Radius (in this way you don't need to create the center point in advance).
+Point</b> and its \b Radius (in this way you don't need to create it in advance).
 \n <b>TUI Command:</b> <em>geompy.MakeSphere(X, Y, Z, Radius)</em>
 
 <b>Example:</b>

doc/salome/gui/GEOM/input/offset_operation.doc

@@ -5,10 +5,6 @@
 \n To produce an <b>Offset Surface</b> in the <b>Main Menu</b> select
 <b>Operations - > Transformation - > Offset Surface</b>
 
-\n There are 2 algorithms for creation of an \b Offset.
-
-\n Firstly, you can offset all faces of selected shape(s) to the same value. 
-
 \n This operation translates each point of an \b Object (a set of
 Objects) along a local normal by a given \b Offset distance (signed
 number, negative value meaning inner offset). Gaps between translated 
@@ -17,12 +13,12 @@ adjacent surfaces are filled in either of two ways:
 - else the surfaces are extended and intersected, so that sharp edges
   are preserved.
 
-\image html transformation11.png
-
-\n <b>Arguments:</b> Name + Object(s) (face(s), shell(s), solid(s)) + Offset value.
-\n The \b Result will be a \b GEOM_Object. 
+\n \b Offset operation is applicable to faces, shells and solids.
 \n \ref restore_presentation_parameters_page "Advanced options".
 
+
+\image html transformation11.png
+
 \n <b>Example:</b>
 
 \image html offsetsn.png "The box and its offset surface (Join by pipes activated)"
@@ -31,27 +27,11 @@ adjacent surfaces are filled in either of two ways:
 - Gaps filled by pipes: <em>geompy.MakeOffset(Shape, Offset),</em>
 - Gaps filled by intersection: <em>geompy.MakeOffsetIntersectionJoin(Shape, Offset),</em>
 
-where \b Shape is a shape(s) which has to be an offset, \b Offset is a value of
+where Shape is a shape(s) which has to be an offset, Offset is a value of
 the offset.
-
-\n Secondly, you can offset only selected faces of the shape to the given value,
-   other faces will stay at their initial places,
-   but could be extended to join with offset faces.
-   Gaps between adjacent surfaces are filled by intersection of extended surfaces.
-
-\image html transformation11a.png
-
-\n <b>Arguments:</b> Name + Object (shell or solid) +
-                     Face(s) of the object + Offset value.
+\n <b>Arguments:</b> Name + Object (face(s), shell(s), solid(s)) +
+Offset value.
 \n The \b Result will be a \b GEOM_Object. 
-\n \ref restore_presentation_parameters_page "Advanced options".
-
-\n <b>TUI Command:</b> 
-- <em>geompy.MakeOffsetPartial(Shape, Offset, ListOfFacesIDs),</em>
-
-where \b Shape is a shape(s) which has to be an offset,
-      \b Offset is a value of the offset,
-      \b ListOfFacesIDs is a list of integer IDs of sub-faces.
 
 Our <b>TUI Scripts</b> provide you with useful examples of the use of
 \ref tui_offset "Transformation Operations".

doc/salome/gui/GEOM/input/tui_check_bop.doc

@@ -1,6 +0,0 @@
-/*!
-
-\page tui_check_bop_page Extract BOP Failure
-\tui_script{check_bop.py}
-
-*/

doc/salome/gui/GEOM/input/tui_measurement_tools.doc

@@ -22,7 +22,6 @@
 <li>\subpage tui_check_self_intersections_fast_page</li>
 <li>\subpage tui_fast_intersection_page</li>
 <li>\subpage tui_check_conformity_page</li>
-<li>\subpage tui_check_bop_page</li>
 <li>\subpage tui_shape_proximity_page</li>
 <li>\subpage tui_xyz_to_uv_page</li>
 <li>\subpage tui_kind_of_shape_page</li>

doc/salome/gui/GEOM/input/using_measurement_tools.doc

@@ -31,7 +31,6 @@
 <li>\subpage free_faces_page "Check Free Faces"</li>
 <li>\subpage check_shape_page "Check Shape"</li>
 <li>\subpage check_conformity_page "Check Conformity"</li>
-<li>\subpage check_bop_page "Extract BOP Failures"</li>
 <li>\subpage check_compound_of_blocks_page "Check compound of blocks"</li>
 <li>\subpage get_non_blocks_page "Get non blocks"</li>
 <li>\subpage check_self_intersections_page "Detect Self-intersections"</li>

idl/GEOM_Gen.idl

@@ -1345,18 +1345,6 @@ module GEOM
                                  in double      theOffset,
                                  in boolean     theJoinByPipes);
 
-    /*!
-     *  \brief Create new object as offset of the given one.
-     *         Only indexed faces are offset, others keep they original location.
-     *  \param theObject The base object for the offset.
-     *  \param theOffset Offset value.
-     *  \param theFacesIDs The list of face IDs indicating faces to be offset.
-     *  \return New GEOM_Object, containing the offset object.
-     */
-    GEOM_Object OffsetShapePartialCopy (in GEOM_Object theObject,
-                                        in double      theOffset,
-                                        in ListOfLong  theFacesIDs);
-
     /*!
      *  \brief Create new object as projection of the given one on a 2D surface.
      *  \param theSource The source object for the projection. It can be a point, edge or wire.
@@ -4797,25 +4785,6 @@ module GEOM
     string PrintShapeErrors (in GEOM_Object theShape,
                              in ShapeErrors theErrors);
 
-    // /*!
-    //  *  \brief Extract and identify any problem in the source shapes used in a Boolean Operation.
-    //  *  \param theShapes Shapes being used in the Boolean Operation
-    //  *  \param theUseTimer Whether to chronometrize computation time
-    //  *  \param theTopoOnly Whether to check topology only
-    //  *  \param theRunParallel Whether to run the computations in parallel
-    //  *  \param theDoExact Whether to perform exact checking
-    //  *  \param theResultShape Output parameter. The result of BOP General Fuse. Indices of its sub-shapes are reported in theErrors structure.
-    //  *  \param theErrors Output parameter. Structure, containing discovered errors and incriminated sub-shapes.
-    //  *  \return TRUE, if the input shapes "seem to be valid" for BOP.
-    //  */
-    boolean ExtractBOPFailure (in ListOfGO     theShapes,
-                               in boolean      theUseTimer,
-                               in boolean      theTopoOnly,
-                               in boolean      theRunParallel,
-                               in boolean      theDoExact,
-                               out GEOM_Object theResultShape,
-                               out ShapeErrors theErrors);
-
     /*!
      *  \brief Check a topology of the given shape on self-intersections presence.
      *  \param theShape Shape to check validity of.

resources/CMakeLists.txt

@@ -33,7 +33,6 @@ SET( _res_files
   ShHealing
   Y14.5M-2009.ttf
   action_assets.json
-  action_id_mutations.json
   3dsketch.png
   isoline.png
   isoline_v.png
@@ -133,7 +132,6 @@ SET( _res_files
   multitranslationsimple.png
   normale.png
   offset.png
-  offset_partial.png
   projection.png
   projection_on_edge.png
   projection_on_wire.png

resources/SalomeApp.xml.in

@@ -114,202 +114,198 @@
   <section name="action_assets">
     <parameter name="%GEOM_ROOT_DIR%/share/salome/resources/geom/action_assets.json" value=""/>
   </section>
-  <section name="actionID_mutations">
-    <parameter name="%GEOM_ROOT_DIR%/share/salome/resources/geom/action_id_mutations.json" value=""/>
+  <section name="shortcuts:GEOM">
+    <parameter name="Isolines/Increase number" value="Meta+I"/>
+    <parameter name="Isolines/Decrease number" value="Meta+D"/>
+    <parameter name="Transparency/Increase" value="Meta+Y"/>
+    <parameter name="Transparency/Decrease" value="Meta+T"/>
+    <parameter name="AdvancedGEOM/DividedCylinder" value=""/>
+    <parameter name="AdvancedGEOM/DividedDisk" value=""/>
+    <parameter name="AdvancedGEOM/SmoothingSurface" value=""/>
+    <parameter name="AdvancedGEOM/TShape_Basic" value=""/>
+    <parameter name="BREPPlugin/Export_BREP" value="Ctrl+E"/>
+    <parameter name="BREPPlugin/Import_BREP" value="Ctrl+I"/>
+    <parameter name="IGESPlugin/Export_IGES" value=""/>
+    <parameter name="IGESPlugin/Import_IGES" value=""/>
+    <parameter name="STEPPlugin/Export_STEP" value=""/>
+    <parameter name="STEPPlugin/Import_STEP" value=""/>
+    <parameter name="STLPlugin/Export_STL" value=""/>
+    <parameter name="STLPlugin/Import_STL" value=""/>
+    <parameter name="VTKPlugin/Export_VTK" value=""/>
+    <parameter name="XAOPlugin/Export_XAO" value=""/>
+    <parameter name="XAOPlugin/Import_XAO" value=""/>
+    <parameter name="STB_DELETE" value="Del"/>
+    <parameter name="STB_POINT" value=""/>
+    <parameter name="STB_LINE" value=""/>
+    <parameter name="STB_CIRCLE" value=""/>
+    <parameter name="STB_ELLIPSE" value=""/>
+    <parameter name="STB_ARC" value=""/>
+    <parameter name="STB_CURVE" value=""/>
+    <parameter name="STB_ISOLINE" value=""/>
+    <parameter name="STB_VECTOR" value=""/>
+    <parameter name="STB_PLANE" value=""/>
+    <parameter name="STB_LOCAL_CS" value=""/>
+    <parameter name="STB_ORIGIN_AND_VECTORS" value=""/>
+    <parameter name="STB_SURFACE_FROM_FACE" value=""/>
+    <parameter name="STB_BOX" value=""/>
+    <parameter name="STB_CYLINDER" value=""/>
+    <parameter name="STB_SPHERE" value=""/>
+    <parameter name="STB_TORUS" value=""/>
+    <parameter name="STB_CONE" value=""/>
+    <parameter name="STB_RECTANGLE" value=""/>
+    <parameter name="STB_DISK" value=""/>
+    <parameter name="STB_EXTRUSION" value=""/>
+    <parameter name="STB_REVOLUTION" value=""/>
+    <parameter name="STB_FILLING" value=""/>
+    <parameter name="STB_PIPE" value=""/>
+    <parameter name="STB_PIPE_PATH" value=""/>
+    <parameter name="STB_THICKNESS" value=""/>
+    <parameter name="STB_GROUP_CREATE" value=""/>
+    <parameter name="STB_GROUP_EDIT" value=""/>
+    <parameter name="STB_GROUP_UNION" value=""/>
+    <parameter name="STB_GROUP_INTERSECT" value=""/>
+    <parameter name="STB_GROUP_CUT" value=""/>
+    <parameter name="STB_FIELD_CREATE" value=""/>
+    <parameter name="STB_FIELD_EDIT" value=""/>
+    <parameter name="STB_RELOAD_IMPORTED" value=""/>
+    <parameter name="STB_Q_FACE" value=""/>
+    <parameter name="STB_HEX_SOLID" value=""/>
+    <parameter name="STB_SKETCH" value=""/>
+    <parameter name="STB_3DSKETCH" value=""/>
+    <parameter name="STB_EXPLODE" value=""/>
+    <parameter name="STB_FEATURE_DETECTION" value=""/>
+    <parameter name="STB_PICTURE_IMPORT" value=""/>
+    <parameter name="STB_CURVE_CREATOR" value=""/>
+    <parameter name="STB_EDGE" value=""/>
+    <parameter name="STB_WIRE" value=""/>
+    <parameter name="STB_FACE" value=""/>
+    <parameter name="STB_SHELL" value=""/>
+    <parameter name="STB_SOLID" value=""/>
+    <parameter name="STB_COMPOUND" value=""/>
+    <parameter name="STB_FUSE" value=""/>
+    <parameter name="STB_COMMON" value=""/>
+    <parameter name="STB_CUT" value=""/>
+    <parameter name="STB_SECTION" value=""/>
+    <parameter name="STB_TRANSLATION" value=""/>
+    <parameter name="STB_ROTATION" value=""/>
+    <parameter name="STB_MODIFY_LOCATION" value=""/>
+    <parameter name="STB_MIRROR" value=""/>
+    <parameter name="STB_SCALE" value=""/>
+    <parameter name="STB_OFFSET" value=""/>
+    <parameter name="STB_PROJECTION" value=""/>
+    <parameter name="STB_PROJ_ON_CYL" value=""/>
+    <parameter name="STB_MUL_TRANSLATION" value=""/>
+    <parameter name="STB_MUL_ROTATION" value=""/>
+    <parameter name="STB_EXTENSION" value=""/>
+    <parameter name="STB_PARTITION" value=""/>
+    <parameter name="STB_ARCHIMEDE" value=""/>
+    <parameter name="STB_FILLET" value=""/>
+    <parameter name="STB_CHAMFER" value=""/>
+    <parameter name="STB_GET_SHAPES_ON_SHAPE" value=""/>
+    <parameter name="STB_GET_SHARED_SHAPES" value=""/>
+    <parameter name="STB_TRANSFER_DATA" value=""/>
+    <parameter name="STB_EXTRACTION" value=""/>
+    <parameter name="STB_EXTRUDED_CUT" value=""/>
+    <parameter name="STB_EXTRUDED_BOSS" value=""/>
+    <parameter name="STB_FILLET_1D" value=""/>
+    <parameter name="STB_FILLET_2D" value=""/>
+    <parameter name="STB_MUL_TRANSFORM" value=""/>
+    <parameter name="STB_EXPLODE_BLOCKS" value=""/>
+    <parameter name="STB_PROPAGATE" value=""/>
+    <parameter name="STB_SEWING" value=""/>
+    <parameter name="STB_GLUE_FACES" value=""/>
+    <parameter name="STB_GLUE_EDGES" value=""/>
+    <parameter name="STB_LIMIT_TOLERANCE" value=""/>
+    <parameter name="STB_SUPPRESS_FACES" value=""/>
+    <parameter name="STB_SUPPERSS_HOLES" value=""/>
+    <parameter name="STB_SHAPE_PROCESS" value=""/>
+    <parameter name="STB_CLOSE_CONTOUR" value=""/>
+    <parameter name="STB_SUPPRESS_INT_WIRES" value=""/>
+    <parameter name="STB_POINT_ON_EDGE" value=""/>
+    <parameter name="STB_CHECK_FREE_BNDS" value=""/>
+    <parameter name="STB_CHECK_FREE_FACES" value=""/>
+    <parameter name="STB_CHANGE_ORIENTATION" value=""/>
+    <parameter name="STB_REMOVE_WEBS" value=""/>
+    <parameter name="STB_REMOVE_EXTRA_EDGES" value=""/>
+    <parameter name="STB_FUSE_EDGES" value=""/>
+    <parameter name="STB_UNION_FACES" value=""/>
+    <parameter name="STB_INSPECT_OBJECT" value=""/>
+    <parameter name="STB_POINT_COORDS" value=""/>
+    <parameter name="STB_BASIC_PROPS" value=""/>
+    <parameter name="STB_MASS_CENTER" value=""/>
+    <parameter name="STB_INERTIA" value=""/>
+    <parameter name="STB_NORMALE" value=""/>
+    <parameter name="STB_BND_BOX" value=""/>
+    <parameter name="STB_MIN_DIST" value=""/>
+    <parameter name="STB_MEASURE_ANGLE" value=""/>
+    <parameter name="STB_MANAGE_DIMENSIONS" value=""/>
+    <parameter name="STB_ANNOTATION" value=""/>
+    <parameter name="STB_EDIT_ANNOTATION" value=""/>
+    <parameter name="STB_DELETE_ANNOTATION" value=""/>
+    <parameter name="STB_TOLERANCE" value=""/>
+    <parameter name="STB_WHAT_IS" value=""/>
+    <parameter name="STB_CHECK" value=""/>
+    <parameter name="STB_CHECK_COMPOUND" value=""/>
+    <parameter name="STB_GET_NON_BLOCKS" value=""/>
+    <parameter name="STB_CHECK_SELF_INTERSECTIONS" value=""/>
+    <parameter name="STB_FAST_CHECK_INTERSECTIONS" value=""/>
+    <parameter name="STB_SHAPE_STATISTICS" value=""/>
+    <parameter name="STB_MATERIALS_LIBRARY" value=""/>
+    <parameter name="STB_WIREFRAME" value=""/>
+    <parameter name="STB_SHADING" value=""/>
+    <parameter name="STB_SHADING_WITH_EDGES" value=""/>
+    <parameter name="STB_TEXTURE" value=""/>
+    <parameter name="STB_DISPLAY_ALL" value=""/>
+    <parameter name="STB_ERASE_ALL" value=""/>
+    <parameter name="STB_DISPLAY" value=""/>
+    <parameter name="STB_VECTOR_MODE" value=""/>
+    <parameter name="STB_VERTICES_MODE" value=""/>
+    <parameter name="STB_NAME_MODE" value=""/>
+    <parameter name="STB_VERTEX_SEL_ONLY" value=""/>
+    <parameter name="STB_EDGE_SEL_ONLY" value=""/>
+    <parameter name="STB_WIRE_SEL_ONLY" value=""/>
+    <parameter name="STB_FACE_SEL_ONLY" value=""/>
+    <parameter name="STB_SHELL_SEL_ONLY" value=""/>
+    <parameter name="STB_SOLID_SEL_ONLY" value=""/>
+    <parameter name="STB_COMPOUND_SEL_ONLY" value=""/>
+    <parameter name="STB_ALL_SEL_ONLY" value=""/>
+    <parameter name="STB_DISPLAY_ONLY" value=""/>
+    <parameter name="STB_SHOW_ONLY_CHILDREN" value=""/>
+    <parameter name="STB_BRING_TO_FRONT" value=""/>
+    <parameter name="STB_CLS_BRING_TO_FRONT" value=""/>
+    <parameter name="STB_ERASE" value=""/>
+    <parameter name="STB_POP_WIREFRAME" value=""/>
+    <parameter name="STB_POP_SHADING" value=""/>
+    <parameter name="STB_POP_SHADING_WITH_EDGES" value=""/>
+    <parameter name="STB_POP_TEXTURE" value=""/>
+    <parameter name="STB_EDGE_WIDTH" value=""/>
+    <parameter name="STB_ISOS_WIDTH" value=""/>
+    <parameter name="STB_POP_VECTORS" value=""/>
+    <parameter name="STB_POP_VERTICES" value=""/>
+    <parameter name="STB_POP_SHOW_NAME" value=""/>
+    <parameter name="STB_POP_DEFLECTION" value=""/>
+    <parameter name="STB_POP_COLOR" value=""/>
+    <parameter name="STB_POP_SETTEXTURE" value=""/>
+    <parameter name="STB_POP_TRANSPARENCY" value=""/>
+    <parameter name="STB_POP_ISOS" value=""/>
+    <parameter name="STB_POP_AUTO_COLOR" value=""/>
+    <parameter name="STB_POP_DISABLE_AUTO_COLOR" value=""/>
+    <parameter name="STB_POP_CREATE_GROUP" value=""/>
+    <parameter name="STB_POP_EDIT_FIELD" value=""/>
+    <parameter name="STB_POP_DISCLOSE_CHILDREN" value=""/>
+    <parameter name="STB_POP_CONCEAL_CHILDREN" value=""/>
+    <parameter name="STB_POP_UNPUBLISH_OBJ" value=""/>
+    <parameter name="STB_POP_PUBLISH_OBJ" value=""/>
+    <parameter name="STB_POP_POINT_MARKER" value=""/>
+    <parameter name="STB_POP_MATERIAL_PROPERTIES" value=""/>
+    <parameter name="STB_POP_PREDEF_MATER_CUSTOM" value=""/>
+    <parameter name="STB_POP_CREATE_FOLDER" value=""/>
+    <parameter name="STB_POP_SORT_CHILD_ITEMS" value=""/>
+    <parameter name="STB_POP_SHOW_DEPENDENCY_TREE" value=""/>
+    <parameter name="STB_POP_REDUCE_STUDY" value=""/>
+    <parameter name="STB_POP_SHOW_ALL_DIMENSIONS" value=""/>
+    <parameter name="STB_POP_HIDE_ALL_DIMENSIONS" value=""/>
+    <parameter name="STB_POP_SHOW_ALL_ANNOTATIONS" value=""/>
+    <parameter name="STB_POP_HIDE_ALL_ANNOTATIONS" value=""/>
   </section>
-  <section name="shortcuts_vA1.0:GEOM">
-    <parameter name="Edit/DELETE" value="Del"/>
-    <parameter name="Inspection/ANNOTATION" value=""/>
-    <parameter name="Inspection/ANNOTATION/DELETE_ANNOTATION" value=""/>
-    <parameter name="Inspection/ANNOTATION/EDIT_ANNOTATION" value=""/>
-    <parameter name="Inspection/BASIC_PROPS" value=""/>
-    <parameter name="Inspection/CHECK" value=""/>
-    <parameter name="Inspection/CHECK_COMPOUND" value=""/>
-    <parameter name="Inspection/CHECK_SELF_INTERSECTIONS" value=""/>
-    <parameter name="Inspection/Dimensions/BND_BOX" value=""/>
-    <parameter name="Inspection/Dimensions/MANAGE_DIMENSIONS" value=""/>
-    <parameter name="Inspection/Dimensions/MEASURE_ANGLE" value=""/>
-    <parameter name="Inspection/Dimensions/MIN_DIST" value=""/>
-    <parameter name="Inspection/FAST_CHECK_INTERSECTIONS" value=""/>
-    <parameter name="Inspection/GET_NON_BLOCKS" value=""/>
-    <parameter name="Inspection/INERTIA" value=""/>
-    <parameter name="Inspection/MASS_CENTER" value=""/>
-    <parameter name="Inspection/NORMALE" value=""/>
-    <parameter name="Inspection/POINT_COORDS" value=""/>
-    <parameter name="Inspection/SHAPE_STATISTICS" value=""/>
-    <parameter name="Inspection/TOLERANCE" value=""/>
-    <parameter name="Inspection/WHAT_IS" value=""/>
-    <parameter name="NewEntity/Basic/3DSKETCH" value=""/>
-    <parameter name="NewEntity/Basic/ARC" value=""/>
-    <parameter name="NewEntity/Basic/CIRCLE" value=""/>
-    <parameter name="NewEntity/Basic/CURVE" value=""/>
-    <parameter name="NewEntity/Basic/CURVE_CREATOR" value=""/>
-    <parameter name="NewEntity/Basic/ELLIPSE" value=""/>
-    <parameter name="NewEntity/Basic/ISOLINE" value=""/>
-    <parameter name="NewEntity/Basic/LINE" value=""/>
-    <parameter name="NewEntity/Basic/LOCAL_CS" value=""/>
-    <parameter name="NewEntity/Basic/ORIGIN_AND_VECTORS" value=""/>
-    <parameter name="NewEntity/Basic/PLANE" value=""/>
-    <parameter name="NewEntity/Basic/POINT" value=""/>
-    <parameter name="NewEntity/Basic/SKETCH" value=""/>
-    <parameter name="NewEntity/Basic/SURFACE_FROM_FACE" value=""/>
-    <parameter name="NewEntity/Basic/VECTOR" value=""/>
-    <parameter name="NewEntity/Blocks/HEX_SOLID" value=""/>
-    <parameter name="NewEntity/Blocks/Q_FACE" value=""/>
-    <parameter name="NewEntity/Build/COMPOUND" value=""/>
-    <parameter name="NewEntity/Build/EDGE" value=""/>
-    <parameter name="NewEntity/Build/FACE" value=""/>
-    <parameter name="NewEntity/Build/SHELL" value=""/>
-    <parameter name="NewEntity/Build/SOLID" value=""/>
-    <parameter name="NewEntity/Build/WIRE" value=""/>
-    <parameter name="NewEntity/EXPLODE" value=""/>
-    <parameter name="NewEntity/FEATURE_DETECTION" value=""/>
-    <parameter name="NewEntity/Field/FIELD_CREATE" value=""/>
-    <parameter name="NewEntity/Field/FIELD_EDIT" value=""/>
-    <parameter name="NewEntity/Generation/EXTRUSION" value=""/>
-    <parameter name="NewEntity/Generation/FILLING" value=""/>
-    <parameter name="NewEntity/Generation/PIPE" value=""/>
-    <parameter name="NewEntity/Generation/PIPE_PATH" value=""/>
-    <parameter name="NewEntity/Generation/REVOLUTION" value=""/>
-    <parameter name="NewEntity/Generation/THICKNESS" value=""/>
-    <parameter name="NewEntity/Group/GROUP_CREATE" value=""/>
-    <parameter name="NewEntity/Group/GROUP_CUT" value=""/>
-    <parameter name="NewEntity/Group/GROUP_EDIT" value=""/>
-    <parameter name="NewEntity/Group/GROUP_INTERSECT" value=""/>
-    <parameter name="NewEntity/Group/GROUP_UNION" value=""/>
-    <parameter name="NewEntity/PICTURE_IMPORT" value=""/>
-    <parameter name="NewEntity/Primitives/BOX" value=""/>
-    <parameter name="NewEntity/Primitives/CONE" value=""/>
-    <parameter name="NewEntity/Primitives/CYLINDER" value=""/>
-    <parameter name="NewEntity/Primitives/DISK" value=""/>
-    <parameter name="NewEntity/Primitives/RECTANGLE" value=""/>
-    <parameter name="NewEntity/Primitives/SPHERE" value=""/>
-    <parameter name="NewEntity/Primitives/TORUS" value=""/>
-    <parameter name="Operations/ARCHIMEDE" value=""/>
-    <parameter name="Operations/Blocks/EXPLODE_BLOCKS" value=""/>
-    <parameter name="Operations/Blocks/MUL_TRANSFORM" value=""/>
-    <parameter name="Operations/Blocks/PROPAGATE" value=""/>
-    <parameter name="Operations/Boolean/COMMON" value=""/>
-    <parameter name="Operations/Boolean/CUT" value=""/>
-    <parameter name="Operations/Boolean/FUSE" value=""/>
-    <parameter name="Operations/Boolean/SECTION" value=""/>
-    <parameter name="Operations/CHAMFER" value=""/>
-    <parameter name="Operations/EXTRACTION" value=""/>
-    <parameter name="Operations/EXTRUDED_BOSS" value=""/>
-    <parameter name="Operations/EXTRUDED_CUT" value=""/>
-    <parameter name="Operations/FILLET" value=""/>
-    <parameter name="Operations/FILLET_1D" value=""/>
-    <parameter name="Operations/FILLET_2D" value=""/>
-    <parameter name="Operations/GET_SHAPES_ON_SHAPE" value=""/>
-    <parameter name="Operations/GET_SHARED_SHAPES" value=""/>
-    <parameter name="Operations/PARTITION" value=""/>
-    <parameter name="Operations/TRANSFER_DATA" value=""/>
-    <parameter name="Operations/Transformation/EXTENSION" value=""/>
-    <parameter name="Operations/Transformation/MIRROR" value=""/>
-    <parameter name="Operations/Transformation/MODIFY_LOCATION" value=""/>
-    <parameter name="Operations/Transformation/MUL_ROTATION" value=""/>
-    <parameter name="Operations/Transformation/MUL_TRANSLATION" value=""/>
-    <parameter name="Operations/Transformation/OFFSET" value=""/>
-    <parameter name="Operations/Transformation/PROJ_ON_CYL" value=""/>
-    <parameter name="Operations/Transformation/PROJECTION" value=""/>
-    <parameter name="Operations/Transformation/ROTATION" value=""/>
-    <parameter name="Operations/Transformation/SCALE" value=""/>
-    <parameter name="Operations/Transformation/TRANSLATION" value=""/>
-    <parameter name="Plugins/AdvancedGEOM/DividedCylinder" value=""/>
-    <parameter name="Plugins/AdvancedGEOM/DividedDisk" value=""/>
-    <parameter name="Plugins/AdvancedGEOM/SmoothingSurface" value=""/>
-    <parameter name="Plugins/AdvancedGEOM/TShape_Basic" value=""/>
-    <parameter name="Plugins/BREPPlugin/Export_BREP" value="Ctrl+E"/>
-    <parameter name="Plugins/BREPPlugin/Import_BREP" value="Ctrl+I"/>
-    <parameter name="Plugins/IGESPlugin/Export_IGES" value=""/>
-    <parameter name="Plugins/IGESPlugin/Import_IGES" value=""/>
-    <parameter name="Plugins/STEPPlugin/Export_STEP" value=""/>
-    <parameter name="Plugins/STEPPlugin/Import_STEP" value=""/>
-    <parameter name="Plugins/STLPlugin/Export_STL" value=""/>
-    <parameter name="Plugins/STLPlugin/Import_STL" value=""/>
-    <parameter name="Plugins/VTKPlugin/Export_VTK" value=""/>
-    <parameter name="Plugins/XAOPlugin/Export_XAO" value=""/>
-    <parameter name="Plugins/XAOPlugin/Import_XAO" value=""/>
-    <parameter name="Repair/CHANGE_ORIENTATION" value=""/>
-    <parameter name="Repair/CHECK_FREE_BNDS" value=""/>
-    <parameter name="Repair/CHECK_FREE_FACES" value=""/>
-    <parameter name="Repair/CLOSE_CONTOUR" value=""/>
-    <parameter name="Repair/FUSE_EDGES" value=""/>
-    <parameter name="Repair/GLUE_EDGES" value=""/>
-    <parameter name="Repair/GLUE_FACES" value=""/>
-    <parameter name="Repair/INSPECT_OBJECT" value=""/>
-    <parameter name="Repair/LIMIT_TOLERANCE" value=""/>
-    <parameter name="Repair/POINT_ON_EDGE" value=""/>
-    <parameter name="Repair/REMOVE_EXTRA_EDGES" value=""/>
-    <parameter name="Repair/REMOVE_WEBS" value=""/>
-    <parameter name="Repair/SEWING" value=""/>
-    <parameter name="Repair/SHAPE_PROCESS" value=""/>
-    <parameter name="Repair/SUPPERSS_HOLES" value=""/>
-    <parameter name="Repair/SUPPRESS_FACES" value=""/>
-    <parameter name="Repair/SUPPRESS_INT_WIRES" value=""/>
-    <parameter name="Repair/UNION_FACES" value=""/>
-    <parameter name="Selection/ALL_SEL_ONLY" value=""/>
-    <parameter name="Selection/COMPOUND_SEL_ONLY" value=""/>
-    <parameter name="Selection/DisplayMode/POP_SHADING" value=""/>
-    <parameter name="Selection/DisplayMode/POP_SHADING_WITH_EDGES" value=""/>
-    <parameter name="Selection/DisplayMode/POP_SHOW_NAME" value=""/>
-    <parameter name="Selection/DisplayMode/POP_TEXTURE" value=""/>
-    <parameter name="Selection/DisplayMode/POP_VECTORS" value=""/>
-    <parameter name="Selection/DisplayMode/POP_VERTICES" value=""/>
-    <parameter name="Selection/DisplayMode/POP_WIREFRAME" value=""/>
-    <parameter name="Selection/EDGE_SEL_ONLY" value=""/>
-    <parameter name="Selection/EDGE_WIDTH" value=""/>
-    <parameter name="Selection/FACE_SEL_ONLY" value=""/>
-    <parameter name="Selection/ISOS_WIDTH" value=""/>
-    <parameter name="Selection/POP_AUTO_COLOR" value=""/>
-    <parameter name="Selection/POP_COLOR" value=""/>
-    <parameter name="Selection/POP_CONCEAL_CHILDREN" value=""/>
-    <parameter name="Selection/POP_CREATE_FOLDER" value=""/>
-    <parameter name="Selection/POP_CREATE_GROUP" value=""/>
-    <parameter name="Selection/POP_DEFLECTION" value=""/>
-    <parameter name="Selection/POP_DISABLE_AUTO_COLOR" value=""/>
-    <parameter name="Selection/POP_DISCLOSE_CHILDREN" value=""/>
-    <parameter name="Selection/POP_EDIT_FIELD" value=""/>
-    <parameter name="Selection/POP_HIDE_ALL_ANNOTATIONS" value=""/>
-    <parameter name="Selection/POP_HIDE_ALL_DIMENSIONS" value=""/>
-    <parameter name="Selection/POP_ISOS" value=""/>
-    <parameter name="Selection/POP_ISOS/Decrease number" value="Meta+D"/>
-    <parameter name="Selection/POP_ISOS/Increase number" value="Meta+I"/>
-    <parameter name="Selection/POP_MATERIAL_PROPERTIES" value=""/>
-    <parameter name="Selection/POP_POINT_MARKER" value=""/>
-    <parameter name="Selection/POP_PREDEF_MATER_CUSTOM" value=""/>
-    <parameter name="Selection/POP_PUBLISH_OBJ" value=""/>
-    <parameter name="Selection/POP_REDUCE_STUDY" value=""/>
-    <parameter name="Selection/POP_SETTEXTURE" value=""/>
-    <parameter name="Selection/POP_SHOW_ALL_ANNOTATIONS" value=""/>
-    <parameter name="Selection/POP_SHOW_ALL_DIMENSIONS" value=""/>
-    <parameter name="Selection/POP_SHOW_DEPENDENCY_TREE" value=""/>
-    <parameter name="Selection/POP_SORT_CHILD_ITEMS" value=""/>
-    <parameter name="Selection/POP_TRANSPARENCY" value=""/>
-    <parameter name="Selection/POP_TRANSPARENCY/Decrease" value="Meta+T"/>
-    <parameter name="Selection/POP_TRANSPARENCY/Increase" value="Meta+Y"/>
-    <parameter name="Selection/POP_UNPUBLISH_OBJ" value=""/>
-    <parameter name="Selection/RELOAD_IMPORTED" value=""/>
-    <parameter name="Selection/SHELL_SEL_ONLY" value=""/>
-    <parameter name="Selection/SOLID_SEL_ONLY" value=""/>
-    <parameter name="Selection/VERTEX_SEL_ONLY" value=""/>
-    <parameter name="Selection/WIRE_SEL_ONLY" value=""/>
-    <parameter name="Tools/CHECK_GEOMETRY" value=""/>
-    <parameter name="Tools/MATERIALS_LIBRARY" value=""/>
-    <parameter name="View/BRING_TO_FRONT" value=""/>
-    <parameter name="View/CLS_BRING_TO_FRONT" value=""/>
-    <parameter name="View/DISPLAY" value=""/>
-    <parameter name="View/DISPLAY_ALL" value=""/>
-    <parameter name="View/DISPLAY_ONLY" value=""/>
-    <parameter name="View/DisplayMode/NAME_MODE" value=""/>
-    <parameter name="View/DisplayMode/SHADING" value=""/>
-    <parameter name="View/DisplayMode/SHADING_WITH_EDGES" value=""/>
-    <parameter name="View/DisplayMode/TEXTURE" value=""/>
-    <parameter name="View/DisplayMode/VECTOR_MODE" value=""/>
-    <parameter name="View/DisplayMode/VERTICES_MODE" value=""/>
-    <parameter name="View/DisplayMode/WIREFRAME" value=""/>
-    <parameter name="View/ERASE" value=""/>
-    <parameter name="View/ERASE_ALL" value=""/>
-    <parameter name="View/SHOW_ONLY_CHILDREN" value=""/>
-  </section>
-</document>
+</document>

resources/action_id_mutations.json

@@ -1,202 +0,0 @@
-{
-   "mutations": [
-      {
-         "sectionPrefixOld": "shortcuts",
-         "sectionPrefixNew": "shortcuts_vA1.0",
-         "oldToNewActionIDMap": {
-            "GEOM/Isolines/Increase number" : "GEOM/Selection/POP_ISOS/Increase number",
-            "GEOM/Isolines/Decrease number" : "GEOM/Selection/POP_ISOS/Decrease number",
-            "GEOM/Transparency/Increase" : "GEOM/Selection/POP_TRANSPARENCY/Increase",
-            "GEOM/Transparency/Decrease" : "GEOM/Selection/POP_TRANSPARENCY/Decrease",
-            "GEOM/AdvancedGEOM/DividedCylinder" : "GEOM/Plugins/AdvancedGEOM/DividedCylinder",
-            "GEOM/AdvancedGEOM/DividedDisk" : "GEOM/Plugins/AdvancedGEOM/DividedDisk",
-            "GEOM/AdvancedGEOM/SmoothingSurface" : "GEOM/Plugins/AdvancedGEOM/SmoothingSurface",
-            "GEOM/AdvancedGEOM/TShape_Basic" : "GEOM/Plugins/AdvancedGEOM/TShape_Basic",
-            "GEOM/BREPPlugin/Export_BREP" : "GEOM/Plugins/BREPPlugin/Export_BREP",
-            "GEOM/BREPPlugin/Import_BREP" : "GEOM/Plugins/BREPPlugin/Import_BREP",
-            "GEOM/IGESPlugin/Export_IGES" : "GEOM/Plugins/IGESPlugin/Export_IGES",
-            "GEOM/IGESPlugin/Import_IGES" : "GEOM/Plugins/IGESPlugin/Import_IGES",
-            "GEOM/STEPPlugin/Export_STEP" : "GEOM/Plugins/STEPPlugin/Export_STEP",
-            "GEOM/STEPPlugin/Import_STEP" : "GEOM/Plugins/STEPPlugin/Import_STEP",
-            "GEOM/STLPlugin/Export_STL" : "GEOM/Plugins/STLPlugin/Export_STL",
-            "GEOM/STLPlugin/Import_STL" : "GEOM/Plugins/STLPlugin/Import_STL",
-            "GEOM/VTKPlugin/Export_VTK" : "GEOM/Plugins/VTKPlugin/Export_VTK",
-            "GEOM/XAOPlugin/Export_XAO" : "GEOM/Plugins/XAOPlugin/Export_XAO",
-            "GEOM/XAOPlugin/Import_XAO" : "GEOM/Plugins/XAOPlugin/Import_XAO",
-            "GEOM/STB_DELETE" : "GEOM/Edit/DELETE",
-            "GEOM/STB_POINT" : "GEOM/NewEntity/Basic/POINT",
-            "GEOM/STB_LINE" : "GEOM/NewEntity/Basic/LINE",
-            "GEOM/STB_CIRCLE" : "GEOM/NewEntity/Basic/CIRCLE",
-            "GEOM/STB_ELLIPSE" : "GEOM/NewEntity/Basic/ELLIPSE",
-            "GEOM/STB_ARC" : "GEOM/NewEntity/Basic/ARC",
-            "GEOM/STB_CURVE" : "GEOM/NewEntity/Basic/CURVE",
-            "GEOM/STB_ISOLINE" :  "GEOM/NewEntity/Basic/ISOLINE",
-            "GEOM/STB_VECTOR" : "GEOM/NewEntity/Basic/VECTOR",
-            "GEOM/STB_PLANE" : "GEOM/NewEntity/Basic/PLANE",
-            "GEOM/STB_LOCAL_CS" : "GEOM/NewEntity/Basic/LOCAL_CS",
-            "GEOM/STB_ORIGIN_AND_VECTORS" : "GEOM/NewEntity/Basic/ORIGIN_AND_VECTORS",
-            "GEOM/STB_SURFACE_FROM_FACE" : "GEOM/NewEntity/Basic/SURFACE_FROM_FACE",
-            "GEOM/STB_BOX" : "GEOM/NewEntity/Primitives/BOX",
-            "GEOM/STB_CYLINDER" : "GEOM/NewEntity/Primitives/CYLINDER",
-            "GEOM/STB_SPHERE" : "GEOM/NewEntity/Primitives/SPHERE",
-            "GEOM/STB_TORUS" : "GEOM/NewEntity/Primitives/TORUS",
-            "GEOM/STB_CONE" : "GEOM/NewEntity/Primitives/CONE",
-            "GEOM/STB_RECTANGLE" : "GEOM/NewEntity/Primitives/RECTANGLE",
-            "GEOM/STB_DISK" : "GEOM/NewEntity/Primitives/DISK",
-            "GEOM/STB_EXTRUSION" : "GEOM/NewEntity/Generation/EXTRUSION",
-            "GEOM/STB_REVOLUTION" : "GEOM/NewEntity/Generation/REVOLUTION",
-            "GEOM/STB_FILLING" : "GEOM/NewEntity/Generation/FILLING",
-            "GEOM/STB_PIPE" : "GEOM/NewEntity/Generation/PIPE",
-            "GEOM/STB_PIPE_PATH" : "GEOM/NewEntity/Generation/PIPE_PATH",
-            "GEOM/STB_THICKNESS" : "GEOM/NewEntity/Generation/THICKNESS",
-            "GEOM/STB_GROUP_CREATE" : "GEOM/NewEntity/Group/GROUP_CREATE",
-            "GEOM/STB_GROUP_EDIT" : "GEOM/NewEntity/Group/GROUP_EDIT",
-            "GEOM/STB_GROUP_UNION" : "GEOM/NewEntity/Group/GROUP_UNION",
-            "GEOM/STB_GROUP_INTERSECT" : "GEOM/NewEntity/Group/GROUP_INTERSECT",
-            "GEOM/STB_GROUP_CUT" : "GEOM/NewEntity/Group/GROUP_CUT",
-            "GEOM/STB_FIELD_CREATE" : "GEOM/NewEntity/Field/FIELD_CREATE",
-            "GEOM/STB_FIELD_EDIT" : "GEOM/NewEntity/Field/FIELD_EDIT",
-            "GEOM/STB_RELOAD_IMPORTED" : "GEOM/Selection/RELOAD_IMPORTED",
-            "GEOM/STB_Q_FACE" : "GEOM/NewEntity/Blocks/Q_FACE",
-            "GEOM/STB_HEX_SOLID" : "GEOM/NewEntity/Blocks/HEX_SOLID",
-            "GEOM/STB_SKETCH" : "GEOM/NewEntity/Basic/SKETCH",
-            "GEOM/STB_3DSKETCH" :  "GEOM/NewEntity/Basic/3DSKETCH",
-            "GEOM/STB_EXPLODE" : "GEOM/NewEntity/EXPLODE",
-            "GEOM/STB_FEATURE_DETECTION" : "GEOM/NewEntity/FEATURE_DETECTION",
-            "GEOM/STB_PICTURE_IMPORT" : "GEOM/NewEntity/PICTURE_IMPORT",
-            "GEOM/STB_CURVE_CREATOR" : "GEOM/NewEntity/Basic/CURVE_CREATOR",
-            "GEOM/STB_EDGE" : "GEOM/NewEntity/Build/EDGE",
-            "GEOM/STB_WIRE" : "GEOM/NewEntity/Build/WIRE",
-            "GEOM/STB_FACE" : "GEOM/NewEntity/Build/FACE",
-            "GEOM/STB_SHELL" : "GEOM/NewEntity/Build/SHELL",
-            "GEOM/STB_SOLID" : "GEOM/NewEntity/Build/SOLID",
-            "GEOM/STB_COMPOUND" : "GEOM/NewEntity/Build/COMPOUND",
-            "GEOM/STB_FUSE" : "GEOM/Operations/Boolean/FUSE",
-            "GEOM/STB_COMMON" : "GEOM/Operations/Boolean/COMMON",
-            "GEOM/STB_CUT" : "GEOM/Operations/Boolean/CUT",
-            "GEOM/STB_SECTION" : "GEOM/Operations/Boolean/SECTION",
-            "GEOM/STB_TRANSLATION" : "GEOM/Operations/Transformation/TRANSLATION",
-            "GEOM/STB_ROTATION" : "GEOM/Operations/Transformation/ROTATION",
-            "GEOM/STB_MODIFY_LOCATION" : "GEOM/Operations/Transformation/MODIFY_LOCATION",
-            "GEOM/STB_MIRROR" : "GEOM/Operations/Transformation/MIRROR",
-            "GEOM/STB_SCALE" : "GEOM/Operations/Transformation/SCALE",
-            "GEOM/STB_OFFSET" : "GEOM/Operations/Transformation/OFFSET",
-            "GEOM/STB_PROJECTION" : "GEOM/Operations/Transformation/PROJECTION",
-            "GEOM/STB_PROJ_ON_CYL" : "GEOM/Operations/Transformation/PROJ_ON_CYL",
-            "GEOM/STB_MUL_TRANSLATION" : "GEOM/Operations/Transformation/MUL_TRANSLATION",
-            "GEOM/STB_MUL_ROTATION" : "GEOM/Operations/Transformation/MUL_ROTATION",
-            "GEOM/STB_EXTENSION" : "GEOM/Operations/Transformation/EXTENSION",
-            "GEOM/STB_PARTITION" : "GEOM/Operations/PARTITION",
-            "GEOM/STB_ARCHIMEDE" : "GEOM/Operations/ARCHIMEDE",
-            "GEOM/STB_FILLET" : "GEOM/Operations/FILLET",
-            "GEOM/STB_CHAMFER" : "GEOM/Operations/CHAMFER",
-            "GEOM/STB_GET_SHAPES_ON_SHAPE" : "GEOM/Operations/GET_SHAPES_ON_SHAPE",
-            "GEOM/STB_GET_SHARED_SHAPES" : "GEOM/Operations/GET_SHARED_SHAPES",
-            "GEOM/STB_TRANSFER_DATA" : "GEOM/Operations/TRANSFER_DATA",
-            "GEOM/STB_EXTRACTION" : "GEOM/Operations/EXTRACTION",
-            "GEOM/STB_EXTRUDED_CUT" : "GEOM/Operations/EXTRUDED_CUT",
-            "GEOM/STB_EXTRUDED_BOSS" : "GEOM/Operations/EXTRUDED_BOSS",
-            "GEOM/STB_FILLET_1D" : "GEOM/Operations/FILLET_1D",
-            "GEOM/STB_FILLET_2D" : "GEOM/Operations/FILLET_2D",
-            "GEOM/STB_MUL_TRANSFORM" : "GEOM/Operations/Blocks/MUL_TRANSFORM",
-            "GEOM/STB_EXPLODE_BLOCKS" : "GEOM/Operations/Blocks/EXPLODE_BLOCKS",
-            "GEOM/STB_PROPAGATE" : "GEOM/Operations/Blocks/PROPAGATE",
-            "GEOM/STB_SEWING" : "GEOM/Repair/SEWING",
-            "GEOM/STB_GLUE_FACES" : "GEOM/Repair/GLUE_FACES",
-            "GEOM/STB_GLUE_EDGES" : "GEOM/Repair/GLUE_EDGES",
-            "GEOM/STB_LIMIT_TOLERANCE" : "GEOM/Repair/LIMIT_TOLERANCE",
-            "GEOM/STB_SUPPRESS_FACES" : "GEOM/Repair/SUPPRESS_FACES",
-            "GEOM/STB_SUPPERSS_HOLES" : "GEOM/Repair/SUPPERSS_HOLES",
-            "GEOM/STB_SHAPE_PROCESS" : "GEOM/Repair/SHAPE_PROCESS",
-            "GEOM/STB_CLOSE_CONTOUR" : "GEOM/Repair/CLOSE_CONTOUR",
-            "GEOM/STB_SUPPRESS_INT_WIRES" : "GEOM/Repair/SUPPRESS_INT_WIRES",
-            "GEOM/STB_POINT_ON_EDGE" : "GEOM/Repair/POINT_ON_EDGE",
-            "GEOM/STB_CHECK_FREE_BNDS" : "GEOM/Repair/CHECK_FREE_BNDS",
-            "GEOM/STB_CHECK_FREE_FACES" : "GEOM/Repair/CHECK_FREE_FACES",
-            "GEOM/STB_CHANGE_ORIENTATION" : "GEOM/Repair/CHANGE_ORIENTATION",
-            "GEOM/STB_REMOVE_WEBS" : "GEOM/Repair/REMOVE_WEBS",
-            "GEOM/STB_REMOVE_EXTRA_EDGES" : "GEOM/Repair/REMOVE_EXTRA_EDGES",
-            "GEOM/STB_FUSE_EDGES" : "GEOM/Repair/FUSE_EDGES",
-            "GEOM/STB_UNION_FACES" : "GEOM/Repair/UNION_FACES",
-            "GEOM/STB_INSPECT_OBJECT" : "GEOM/Repair/INSPECT_OBJECT",
-            "GEOM/STB_POINT_COORDS" : "GEOM/Inspection/POINT_COORDS",
-            "GEOM/STB_BASIC_PROPS" : "GEOM/Inspection/BASIC_PROPS",
-            "GEOM/STB_MASS_CENTER" : "GEOM/Inspection/MASS_CENTER",
-            "GEOM/STB_INERTIA" : "GEOM/Inspection/INERTIA",
-            "GEOM/STB_NORMALE" : "GEOM/Inspection/NORMALE",
-            "GEOM/STB_BND_BOX" : "GEOM/Inspection/Dimensions/BND_BOX",
-            "GEOM/STB_MIN_DIST" : "GEOM/Inspection/Dimensions/MIN_DIST",
-            "GEOM/STB_MEASURE_ANGLE" : "GEOM/Inspection/Dimensions/MEASURE_ANGLE",
-            "GEOM/STB_MANAGE_DIMENSIONS" : "GEOM/Inspection/Dimensions/MANAGE_DIMENSIONS",
-            "GEOM/STB_ANNOTATION" : "GEOM/Inspection/ANNOTATION",
-            "GEOM/STB_EDIT_ANNOTATION" : "GEOM/Inspection/ANNOTATION/EDIT_ANNOTATION",
-            "GEOM/STB_DELETE_ANNOTATION" : "GEOM/Inspection/ANNOTATION/DELETE_ANNOTATION",
-            "GEOM/STB_TOLERANCE" : "GEOM/Inspection/TOLERANCE",
-            "GEOM/STB_WHAT_IS" :  "GEOM/Inspection/WHAT_IS",
-            "GEOM/STB_CHECK" : "GEOM/Inspection/CHECK",
-            "GEOM/STB_CHECK_COMPOUND" : "GEOM/Inspection/CHECK_COMPOUND",
-            "GEOM/STB_GET_NON_BLOCKS" : "GEOM/Inspection/GET_NON_BLOCKS",
-            "GEOM/STB_CHECK_SELF_INTERSECTIONS" : "GEOM/Inspection/CHECK_SELF_INTERSECTIONS",
-            "GEOM/STB_FAST_CHECK_INTERSECTIONS" : "GEOM/Inspection/FAST_CHECK_INTERSECTIONS",
-            "GEOM/STB_SHAPE_STATISTICS" : "GEOM/Inspection/SHAPE_STATISTICS",
-            "GEOM/STB_MATERIALS_LIBRARY" : "GEOM/Tools/MATERIALS_LIBRARY",
-            "GEOM/STB_WIREFRAME" : "GEOM/View/DisplayMode/WIREFRAME",
-            "GEOM/STB_SHADING" : "GEOM/View/DisplayMode/SHADING",
-            "GEOM/STB_SHADING_WITH_EDGES" : "GEOM/View/DisplayMode/SHADING_WITH_EDGES",
-            "GEOM/STB_TEXTURE" : "GEOM/View/DisplayMode/TEXTURE",
-            "GEOM/STB_DISPLAY_ALL" : "GEOM/View/DISPLAY_ALL",
-            "GEOM/STB_ERASE_ALL" : "GEOM/View/ERASE_ALL",
-            "GEOM/STB_DISPLAY" : "GEOM/View/DISPLAY",
-            "GEOM/STB_VECTOR_MODE" : "GEOM/View/DisplayMode/VECTOR_MODE",
-            "GEOM/STB_VERTICES_MODE" : "GEOM/View/DisplayMode/VERTICES_MODE",
-            "GEOM/STB_NAME_MODE" : "GEOM/View/DisplayMode/NAME_MODE",
-            "GEOM/STB_VERTEX_SEL_ONLY" : "GEOM/Selection/VERTEX_SEL_ONLY",
-            "GEOM/STB_EDGE_SEL_ONLY" : "GEOM/Selection/EDGE_SEL_ONLY",
-            "GEOM/STB_WIRE_SEL_ONLY" :  "GEOM/Selection/WIRE_SEL_ONLY",
-            "GEOM/STB_FACE_SEL_ONLY" : "GEOM/Selection/FACE_SEL_ONLY",
-            "GEOM/STB_SHELL_SEL_ONLY" : "GEOM/Selection/SHELL_SEL_ONLY",
-            "GEOM/STB_SOLID_SEL_ONLY" :  "GEOM/Selection/SOLID_SEL_ONLY",
-            "GEOM/STB_COMPOUND_SEL_ONLY" : "GEOM/Selection/COMPOUND_SEL_ONLY",
-            "GEOM/STB_ALL_SEL_ONLY" : "GEOM/Selection/ALL_SEL_ONLY",
-            "GEOM/STB_DISPLAY_ONLY" : "GEOM/View/DISPLAY_ONLY",
-            "GEOM/STB_SHOW_ONLY_CHILDREN" : "GEOM/View/SHOW_ONLY_CHILDREN",
-            "GEOM/STB_BRING_TO_FRONT" : "GEOM/View/BRING_TO_FRONT",
-            "GEOM/STB_CLS_BRING_TO_FRONT" : "GEOM/View/CLS_BRING_TO_FRONT",
-            "GEOM/STB_ERASE" : "GEOM/View/ERASE",
-            "GEOM/STB_POP_WIREFRAME" : "GEOM/Selection/DisplayMode/POP_WIREFRAME",
-            "GEOM/STB_POP_SHADING" : "GEOM/Selection/DisplayMode/POP_SHADING",
-            "GEOM/STB_POP_SHADING_WITH_EDGES" : "GEOM/Selection/DisplayMode/POP_SHADING_WITH_EDGES",
-            "GEOM/STB_POP_TEXTURE" : "GEOM/Selection/DisplayMode/POP_TEXTURE",
-            "GEOM/STB_EDGE_WIDTH" : "GEOM/Selection/EDGE_WIDTH",
-            "GEOM/STB_ISOS_WIDTH" : "GEOM/Selection/ISOS_WIDTH",
-            "GEOM/STB_POP_VECTORS" : "GEOM/Selection/DisplayMode/POP_VECTORS",
-            "GEOM/STB_POP_VERTICES" : "GEOM/Selection/DisplayMode/POP_VERTICES",
-            "GEOM/STB_POP_SHOW_NAME" : "GEOM/Selection/DisplayMode/POP_SHOW_NAME",
-            "GEOM/STB_POP_DEFLECTION" : "GEOM/Selection/POP_DEFLECTION",
-            "GEOM/STB_POP_COLOR" : "GEOM/Selection/POP_COLOR",
-            "GEOM/STB_POP_SETTEXTURE" : "GEOM/Selection/POP_SETTEXTURE",
-            "GEOM/STB_POP_TRANSPARENCY" : "GEOM/Selection/POP_TRANSPARENCY",
-            "GEOM/STB_POP_ISOS" : "GEOM/Selection/POP_ISOS",
-            "GEOM/STB_POP_AUTO_COLOR" : "GEOM/Selection/POP_AUTO_COLOR",
-            "GEOM/STB_POP_DISABLE_AUTO_COLOR" : "GEOM/Selection/POP_DISABLE_AUTO_COLOR",
-            "GEOM/STB_POP_CREATE_GROUP" : "GEOM/Selection/POP_CREATE_GROUP",
-            "GEOM/STB_POP_EDIT_FIELD" : "GEOM/Selection/POP_EDIT_FIELD",
-            "GEOM/STB_POP_DISCLOSE_CHILDREN" : "GEOM/Selection/POP_DISCLOSE_CHILDREN",
-            "GEOM/STB_POP_CONCEAL_CHILDREN" : "GEOM/Selection/POP_CONCEAL_CHILDREN",
-            "GEOM/STB_POP_UNPUBLISH_OBJ" : "GEOM/Selection/POP_UNPUBLISH_OBJ",
-            "GEOM/STB_POP_PUBLISH_OBJ" : "GEOM/Selection/POP_PUBLISH_OBJ",
-            "GEOM/STB_POP_POINT_MARKER" : "GEOM/Selection/POP_POINT_MARKER",
-            "GEOM/STB_POP_MATERIAL_PROPERTIES" : "GEOM/Selection/POP_MATERIAL_PROPERTIES",
-            "GEOM/STB_POP_PREDEF_MATER_CUSTOM" : "GEOM/Selection/POP_PREDEF_MATER_CUSTOM",
-            "GEOM/STB_POP_CREATE_FOLDER" : "GEOM/Selection/POP_CREATE_FOLDER",
-            "GEOM/STB_POP_SORT_CHILD_ITEMS" : "GEOM/Selection/POP_SORT_CHILD_ITEMS",
-            "GEOM/STB_POP_SHOW_DEPENDENCY_TREE" : "GEOM/Selection/POP_SHOW_DEPENDENCY_TREE",
-            "GEOM/STB_POP_REDUCE_STUDY" : "GEOM/Selection/POP_REDUCE_STUDY",
-            "GEOM/STB_POP_SHOW_ALL_DIMENSIONS" : "GEOM/Selection/POP_SHOW_ALL_DIMENSIONS",
-            "GEOM/STB_POP_HIDE_ALL_DIMENSIONS" : "GEOM/Selection/POP_HIDE_ALL_DIMENSIONS",
-            "GEOM/STB_POP_SHOW_ALL_ANNOTATIONS" : "GEOM/Selection/POP_SHOW_ALL_ANNOTATIONS",
-            "GEOM/STB_POP_HIDE_ALL_ANNOTATIONS" : "GEOM/Selection/POP_HIDE_ALL_ANNOTATIONS"
-         }
-      }
-   ]
-}

src/AdvancedEngine/CMakeLists.txt

@@ -25,7 +25,6 @@ INCLUDE_DIRECTORIES(
   ${PTHREAD_INCLUDE_DIR}
   ${OpenCASCADE_INCLUDE_DIR}
   ${KERNEL_INCLUDE_DIRS}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${PROJECT_SOURCE_DIR}/src/GEOMImpl
   ${PROJECT_SOURCE_DIR}/src/GEOM
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/BREPPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/CurveCreator/CurveCreator_Curve.cxx

@@ -1093,13 +1093,10 @@ void CurveCreator_Curve::constructAISObject()
   // myAISShape->SetColor( myCurveColor );
   myAISShape->SetWidth( myLineWidth );
   Handle(Prs3d_PointAspect) anAspect = myAISShape->Attributes()->PointAspect();
-  if (!anAspect.IsNull())
-  {
-    anAspect->SetScale( 3.0 );
-    anAspect->SetTypeOfMarker(Aspect_TOM_O_POINT);
-    anAspect->SetColor(myPointAspectColor);
-    myAISShape->Attributes()->SetPointAspect( anAspect );
-  }
+  anAspect->SetScale( 3.0 );
+  anAspect->SetTypeOfMarker(Aspect_TOM_O_POINT);
+  anAspect->SetColor(myPointAspectColor);
+  myAISShape->Attributes()->SetPointAspect( anAspect );
 }
 
 Handle(AIS_InteractiveObject) CurveCreator_Curve::getAISObject( const bool theNeedToBuild ) const

src/GEOM/CMakeLists.txt

@@ -31,7 +31,6 @@ INCLUDE_DIRECTORIES(
 # additional preprocessor / compiler flags
 ADD_DEFINITIONS(
   ${OpenCASCADE_DEFINITIONS}
-  ${OMNIORB_DEFINITIONS}
   )
 
 # libraries to link to
@@ -58,7 +57,6 @@ SET(GEOM_HEADERS
   GEOM_PythonDump.hxx
   GEOM_DataMapOfAsciiStringTransient.hxx
   GEOM_BaseObject.hxx
-  GEOM_ColorUtils.hxx
   )
 
 # --- sources ---
@@ -75,7 +73,6 @@ SET(GEOM_SOURCES
   GEOM_BaseDriver.cxx
   GEOM_SubShapeDriver.cxx
   GEOM_PythonDump.cxx
-  GEOM_ColorUtils.cxx
   )
 
 # --- rules ---

src/GEOM/GEOM_ColorUtils.cxx

@@ -1,101 +0,0 @@
-// Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
-//
-// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-//
-
-#include "GEOM_ColorUtils.hxx"
-
-#include <vector>
-#include <cmath>
-#include <random>
-
-namespace
-{
-    struct ColorRGB
-    {
-        double r{0.0};
-        double g{0.0};
-        double b{0.0};
-    };
-
-    ColorRGB fromHsv(const int h, const int s, const int v)
-    {
-        const double hh = h / 60.0;
-        const double ss = s / 255.0;
-        const double vv = v / 255.0;
-    
-        const int i = static_cast<int>(std::floor(hh)) % 6;
-        const double f = hh - std::floor(hh);
-        const double p = vv * (1.0 - ss);
-        const double q = vv * (1.0 - f * ss);
-        const double t = vv * (1.0 - (1.0 - f) * ss);
-    
-        switch (i)
-        {
-            case 0: return { vv, t, p };
-            case 1: return { q, vv, p };
-            case 2: return { p, vv, t };
-            case 3: return { p, q, vv };
-            case 4: return { t, p, vv };
-            case 5: return { vv, p, q };
-            default: return { 0.0, 0.0, 0.0 };
-        }
-    }
-}
-
-SALOMEDS::Color GEOM_ColorUtils::getPredefinedUniqueColor()
-{
-    static const std::vector<ColorRGB> colors = []()
-    {
-        std::vector<ColorRGB> tempColors;
-        for (int s = 0; s < 2; s++)
-        {
-            for (int v = 100; v >= 40; v -= 20)
-            {
-                for (int h = 0; h < 359; h += 60)
-                {
-                    tempColors.push_back(fromHsv(h, 255 - s * 127, v * 255 / 100));
-                }
-            }
-        }
-        return tempColors;
-    }();
-
-    static int currentColor = randomize(colors.size());
-
-    const SALOMEDS::Color color
-    {
-        colors[currentColor].r,
-        colors[currentColor].g,
-        colors[currentColor].b
-    };
-
-    currentColor = (currentColor + 1) % colors.size();
-
-    return color;
-}
-
-int GEOM_ColorUtils::randomize(int size)
-{
-    std::random_device rd;
-    std::mt19937 gen(rd());
-    std::uniform_int_distribution<> dis(0, size - 1);
-    return dis(gen);
-}

src/GEOM/GEOM_ColorUtils.hxx

@@ -1,40 +0,0 @@
-// Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
-//
-// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License, or (at your option) any later version.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-//
-
-#ifndef GEOMUTILS_COLOR_HXX
-#define GEOMUTILS_COLOR_HXX
-
-#include "SALOMEDS_Attributes.hh"
-
-#include <Standard_Macro.hxx>
-
-
-class GEOM_ColorUtils
-{
-public:
-    Standard_EXPORT static SALOMEDS::Color getPredefinedUniqueColor();
-
-private:
-    Standard_EXPORT static int randomize(int size);
-};
-
-#endif // GEOMUTILS_COLOR_HXX

src/GEOM/GEOM_Object.cxx

@@ -22,9 +22,6 @@
 
 #include "GEOM_Object.hxx"
 
-#include "GEOM_Engine.hxx"
-#include "GEOM_ColorUtils.hxx"
-
 #include <TDataStd_Integer.hxx>
 #include <TDataStd_Real.hxx>
 #include <TDataStd_RealArray.hxx>
@@ -160,18 +157,6 @@ GEOM_Object::Color GEOM_Object::GetColor()
 void GEOM_Object::SetAutoColor(bool theAutoColor)
 {
   TDataStd_Integer::Set(_label.FindChild(AUTO_COLOR_LABEL), (int)theAutoColor);
-
-  // Set color for the object here, othrewise it will stay default forever, despite 
-  // the color displayed in viewver being defined on GEOM_Displayer::getColor() call.
-  // It's not clear if we need to reset color when auto color is disabled.
-  if (theAutoColor)
-  {
-    const SALOMEDS::Color color = GEOM_ColorUtils::getPredefinedUniqueColor();
-    SetColor({ color.R, color.G, color.B });
-  }
-
-  // Set color for all sub-shapes objects
-  SetAutoColorSubShapes(theAutoColor);
 }
 
 //=============================================================================
@@ -311,34 +296,5 @@ GEOM_Object::GetLastFunctions( const std::list< Handle(GEOM_Object) >& theObject
   return funs;
 }
 
-//=============================================================================
-/*!
- *  Toggles an auto color mode for sub-shapes of GEOM_Object
- */
-//=============================================================================
-void GEOM_Object::SetAutoColorSubShapes(bool theAutoColor)
-{
-  const int nbFunctions = GetNbFunctions();
-  for (int i = 1; i <= nbFunctions; i++)
-  {
-    Handle(GEOM_Function) aFunction = GetFunction(i);
-    if (aFunction.IsNull())
-      continue;
-
-    const TDataStd_ListOfExtendedString& aListEntries = aFunction->GetSubShapeReferences();
-    for (TDataStd_ListIteratorOfListOfExtendedString anIt(aListEntries); anIt.More(); anIt.Next())
-    {
-      const TCollection_AsciiString anEntry = anIt.Value();
-      Handle(GEOM_Object) aSubObj =
-        Handle(GEOM_Object)::DownCast(GEOM_Engine::GetEngine()->GetObject(anEntry.ToCString(), false));
-      if (aSubObj.IsNull())
-        continue;
-
-      aSubObj->SetAutoColor(theAutoColor);
-    }
-  }
-}
-
-
 IMPLEMENT_STANDARD_RTTIEXT(GEOM_Object, GEOM_BaseObject )
 

src/GEOM/GEOM_Object.hxx

@@ -114,10 +114,6 @@ class GEOM_Object : public GEOM_BaseObject
   Standard_EXPORT static Handle(TColStd_HSequenceOfTransient)
     GetLastFunctions( const std::list< Handle(GEOM_Object) >& theObjects );
 
-protected:
-  // Toggles an auto color mode for sub-shapes of GEOM_Object
-  Standard_EXPORT void SetAutoColorSubShapes(bool theAutoColor);
-
 public:
   DEFINE_STANDARD_RTTIEXT(GEOM_Object,GEOM_BaseObject)
 };

src/GEOMAlgo/GEOMAlgo_AlgoTools.cxx

@@ -101,7 +101,6 @@
 
 #include <ShapeUpgrade_ShapeDivideArea.hxx>
 #include <ShapeUpgrade_UnifySameDomain.hxx>
-#include <ShapeFix.hxx>
 
 #include <GEOMAlgo_PassKeyShape.hxx>
 
@@ -1016,13 +1015,6 @@ Standard_Integer GEOMAlgo_AlgoTools::PointCloudInFace(const TopoDS_Face& theFace
   tool.NbParts() = theNbPnts;
   tool.Perform();
   TopoDS_Shape res = tool.Result();
-  if (res.IsNull())
-    return -1;
-
-  // Splitting algorithm can produces invalid shapes that results in
-  // infinite loop on ShapeUpgrade_UnifySameDomain::build() call.
-  // Here is a fix from OCCT DRAW: SWDRAW_ShapeUpgrade: splitbynumber().
-  ShapeFix::SameParameter(res, Standard_False);
 
   BRep_Builder aBB;
   TopoDS_Compound aGlobalRes;
@@ -1536,12 +1528,6 @@ void ModifyFacesForGlobalResult(const TopoDS_Face&     theInputFace,
         aLocalTool.SetNumbersUVSplits (1, aNumberToSplit);
       aLocalTool.Perform();
       aLocalResult = aLocalTool.Result();
-
-      // Splitting algorithm can produces invalid shapes that results in
-      // infinite loop on ShapeUpgrade_UnifySameDomain::build() call.
-      // Here is a fix from OCCT DRAW: SWDRAW_ShapeUpgrade: splitbynumber().
-      ShapeFix::SameParameter(aLocalResult, Standard_False);
-
       aNbFacesInLocalResult = aNumberToSplit;
 #endif
     }
@@ -1622,11 +1608,6 @@ void ModifyFacesForGlobalResult(const TopoDS_Face&     theInputFace,
         aLocalTool.SetNumbersUVSplits (1, aNumberToSplit);
       aLocalTool.Perform();
       aLocalResult = aLocalTool.Result();
-
-      // Splitting algorithm can produces invalid shapes that results in
-      // infinite loop on ShapeUpgrade_UnifySameDomain::build() call.
-      // Here is a fix from OCCT DRAW: SWDRAW_ShapeUpgrade: splitbynumber().
-      ShapeFix::SameParameter(aLocalResult, Standard_False);
 #endif
     }
     else

src/GEOMBase/GEOMBase.cxx

@@ -488,32 +488,6 @@ void GEOMBase::ConvertListOfIOInListOfGO( const SALOME_ListIO& IObjects,
   }
 }
 
-//=======================================================================
-// function : GetObjectFromEntry()
-// purpose  : Get the GEOM_Object from the study entry.
-//=======================================================================
-GEOM::GEOM_Object_ptr GEOMBase::GetObjectFromEntry(const char* entry)
-{
-  GEOM::GEOM_Object_var object;
-
-  if (entry)
-  {
-    SalomeApp_Study* study = dynamic_cast<SalomeApp_Study*>(SUIT_Session::session()->activeApplication()->activeStudy());
-    if (study)
-    {
-      _PTR(Study) studyDS = study->studyDS();
-      _PTR(SObject) obj = studyDS->FindObjectID(entry);
-      if (GeometryGUI::IsInGeomComponent(obj))
-      {
-        CORBA::Object_var corbaObj = GeometryGUI::ClientSObjectToObject(obj);
-        object = GEOM::GEOM_Object::_narrow(corbaObj);
-      }
-    }
-  }
-
-  return object._retn();
-}
-
 //=================================================================================
 // function : CreateArrowForLinearEdge()
 // purpose  : Create a cone topology to be used to display an arrow in the middle
@@ -822,23 +796,6 @@ QString GEOMBase::GetName( GEOM::GEOM_Object_ptr object )
   return name;
 }
 
-//=======================================================================
-// function : GetName()
-// purpose  : Get name of objects
-//=======================================================================
-QString GEOMBase::GetName( const QList<GEOM::GeomObjPtr>& objects )
-{
-  QString name;
-
-  int nbSel = objects.count();
-  if (nbSel == 1)
-    name = GEOMBase::GetName( objects[0].get() );
-  else if (nbSel > 1)
-    name = QObject::tr("%1_objects").arg( nbSel );
-
-  return name;
-}
-
 //=======================================================================
 // function : IsShape()
 // purpose  : Return TRUE if object is valid and has shape

src/GEOMBase/GEOMBase.h

@@ -95,8 +95,6 @@ public :
 
   static QString      GetIORFromObject( GEOM::GEOM_Object_ptr object );
 
-  static GEOM::GEOM_Object_ptr GetObjectFromEntry(const char* entry);
-
   /* Geometry */
   static bool         VertexToPoint( const TopoDS_Shape& shape, gp_Pnt& point );
 
@@ -124,7 +122,6 @@ public :
 
   /* Gets name of object */
   static QString      GetName( GEOM::GEOM_Object_ptr object );
-  static QString      GetName( const QList<GEOM::GeomObjPtr>& objects );
 
   /* Check if object has shape */
   static bool         IsShape( GEOM::GEOM_Object_ptr object );

src/GEOMGUI/CMakeLists.txt

@@ -37,7 +37,6 @@ INCLUDE_DIRECTORIES(
   ${PROJECT_SOURCE_DIR}/src/GEOMImpl
   ${PROJECT_SOURCE_DIR}/src/GEOMUtils
   ${PROJECT_SOURCE_DIR}/src/GEOM_I
-  ${PROJECT_SOURCE_DIR}/src/GEOM
   ${CMAKE_CURRENT_SOURCE_DIR}
   )
 

src/GEOMGUI/GEOM_Displayer.cxx

@@ -51,7 +51,6 @@
 #include <GEOMGUI_AnnotationMgr.h>
 
 #include <GEOMUtils.hxx>
-#include "GEOM_ColorUtils.hxx"
 
 #include <Material_Model.h>
 
@@ -296,6 +295,19 @@ namespace
       }
     }
   }
+
+  uint randomize( uint size )
+  {
+    static bool initialized = false;
+    if ( !initialized ) {
+      qsrand( QDateTime::currentDateTime().toTime_t() );
+      initialized = true;
+    }
+    uint v = qrand();
+    v = uint( (double)( v ) / RAND_MAX * size );
+    v = qMax( uint(0), qMin ( v, size-1 ) );
+    return v;
+  }
 } // namespace
 
 //================================================================
@@ -2478,6 +2490,36 @@ bool GEOM_Displayer::HasDisplayMode() const
   return myHasDisplayMode;
 }
 
+SALOMEDS::Color GEOM_Displayer::getPredefinedUniqueColor()
+{
+  static QList<QColor> colors;
+
+  if ( colors.isEmpty() ) {
+
+    for (int s = 0; s < 2 ; s++)
+    {
+      for (int v = 100; v >= 40; v = v - 20)
+      {
+        for (int h = 0; h < 359 ; h = h + 60)
+        {
+          colors.append(QColor::fromHsv(h, 255 - s * 127, v * 255 / 100));
+        }
+      }
+    }
+  }
+
+  static int currentColor = randomize( colors.size() );
+
+  SALOMEDS::Color color;
+  color.R = (double)colors[currentColor].red()   / 255.0;
+  color.G = (double)colors[currentColor].green() / 255.0;
+  color.B = (double)colors[currentColor].blue()  / 255.0;
+
+  currentColor = (currentColor+1) % colors.count();
+
+  return color;
+}
+
 SALOMEDS::Color GEOM_Displayer::getUniqueColor( const QList<SALOMEDS::Color>& theReservedColors )
 {
   int aHue = -1;
@@ -2735,7 +2777,7 @@ SALOMEDS::Color GEOM_Displayer::getColor(GEOM::GEOM_Object_var theGeomObject, bo
             GEOM::GEOM_Object_var aMainObject = theGeomObject->GetMainShape();
             if ( !CORBA::is_nil( aMainObject ) && aMainObject->GetAutoColor() ) {
 #ifdef SIMPLE_AUTOCOLOR  // simplified algorithm for auto-colors
-              aSColor = GEOM_ColorUtils::getPredefinedUniqueColor();
+              aSColor = getPredefinedUniqueColor();
               hasColor = true;
 #else                    // old algorithm  for auto-colors
               QList<SALOMEDS::Color> aReservedColors;

src/GEOMGUI/GEOM_Displayer.h

@@ -209,6 +209,7 @@ public:
   SalomeApp_Study* getStudy() const;
 
   static SALOMEDS::Color getUniqueColor( const QList<SALOMEDS::Color>& );
+  static SALOMEDS::Color getPredefinedUniqueColor();
 
   /*Get color of the geom object*/
   static SALOMEDS::Color getColor(GEOM::GEOM_Object_var aGeomObject, bool& hasColor);

src/GEOMGUI/GEOM_images.ts

@@ -451,10 +451,6 @@
             <source>ICON_DLG_OFFSET</source>
             <translation>offset.png</translation>
         </message>
-        <message>
-            <source>ICON_DLG_OFFSET_PARTIAL</source>
-            <translation>offset_partial.png</translation>
-        </message>
         <message>
             <source>ICON_DLG_PROJECTION_ON_FACE</source>
             <translation>projection.png</translation>

src/GEOMGUI/GEOM_msg_en.ts

@@ -7982,14 +7982,6 @@ Do you want to create new material?</translation>
         <source>GEOM_JOIN_BY_PIPES</source>
         <translation>Join by pipes</translation>
     </message>
-    <message>
-        <source>TOOLTIP_OFFSET</source>
-        <translation>Offset</translation>
-    </message>
-    <message>
-        <source>TOOLTIP_OFFSET_PARTIAL</source>
-        <translation>Partial offset</translation>
-    </message>
 </context>
 <context>
     <name>OperationGUI_ExtractionDlg</name>

src/GEOMGUI/GEOM_msg_fr.ts

@@ -7960,21 +7960,6 @@ Voulez-vous en créer un nouveau ?</translation>
         <translation>Longueur de l&apos;angle</translation>
     </message>
 </context>
-<context>
-    <name>TransformationGUI_OffsetDlg</name>
-    <message>
-        <source>GEOM_JOIN_BY_PIPES</source>
-        <translation>Rejoindre par des tuyaux</translation>
-    </message>
-    <message>
-        <source>TOOLTIP_OFFSET</source>
-        <translation>Décalage</translation>
-    </message>
-    <message>
-        <source>TOOLTIP_OFFSET_PARTIAL</source>
-        <translation>Décalage partiel</translation>
-    </message>
-</context>
 <context>
     <name>OperationGUI_ExtractionDlg</name>
     <message>

src/GEOMGUI/GeometryGUI.cxx

@@ -945,23 +945,7 @@ void GeometryGUI::createGeomAction( const int id, const QString& label, const QS
 void GeometryGUI::createGeomAction( const int id, const QString& label, const QString& icolabel,
                                     const int accel, const bool toggle)
 {
-  createGeomAction( id, label, icolabel, accel, toggle, label );
-}
-
-void GeometryGUI::createGeomAction(
-  const int inMenuIdx,
-  const QPair<QString, QString>& inModuleIDLastTokenAndPrefix,
-  const QString& iconID,
-  const bool toggle
-) {
-  const QString& inModuleIDLastToken = inModuleIDLastTokenAndPrefix.first;
-  const QString& inModuleIDPrefix = inModuleIDLastTokenAndPrefix.second;
-
-  QString inModuleActionID = inModuleIDLastToken;
-  if (!inModuleIDPrefix.isEmpty())
-    inModuleActionID = inModuleIDPrefix + "/" + inModuleActionID;
-
-  createGeomAction( inMenuIdx, inModuleIDLastToken, iconID, 0 /*keySequenceIntRepresentation*/, toggle, inModuleActionID );
+  createGeomAction( id, label, icolabel, accel, toggle, QString( "STB_%1" ).arg( label ) );
 }
 
 //=======================================================================
@@ -1015,223 +999,223 @@ void GeometryGUI::initialize( CAM_Application* app )
 
   // ----- create actions --------------
 
-  createGeomAction( GEOMOp::OpDelete,     {"DELETE", "Edit"} );
+  createGeomAction( GEOMOp::OpDelete,     "DELETE", "", Qt::Key_Delete );
 
-  createGeomAction( GEOMOp::OpPoint,      {"POINT", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpLine,       {"LINE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpCircle,     {"CIRCLE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpEllipse,    {"ELLIPSE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpArc,        {"ARC", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpCurve,      {"CURVE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpIsoline,    {"ISOLINE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpVector,     {"VECTOR", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpPlane,      {"PLANE", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpLCS,        {"LOCAL_CS", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpOriginAndVectors, {"ORIGIN_AND_VECTORS", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpSurfaceFromFace,  {"SURFACE_FROM_FACE", "NewEntity/Basic"} );
+  createGeomAction( GEOMOp::OpPoint,      "POINT" );
+  createGeomAction( GEOMOp::OpLine,       "LINE" );
+  createGeomAction( GEOMOp::OpCircle,     "CIRCLE" );
+  createGeomAction( GEOMOp::OpEllipse,    "ELLIPSE" );
+  createGeomAction( GEOMOp::OpArc,        "ARC" );
+  createGeomAction( GEOMOp::OpCurve,      "CURVE" );
+  createGeomAction( GEOMOp::OpIsoline,    "ISOLINE" );
+  createGeomAction( GEOMOp::OpVector,     "VECTOR" );
+  createGeomAction( GEOMOp::OpPlane,      "PLANE" );
+  createGeomAction( GEOMOp::OpLCS,        "LOCAL_CS" );
+  createGeomAction( GEOMOp::OpOriginAndVectors, "ORIGIN_AND_VECTORS" );
+  createGeomAction( GEOMOp::OpSurfaceFromFace,  "SURFACE_FROM_FACE" );
 
-  createGeomAction( GEOMOp::OpBox,        {"BOX", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpCylinder,   {"CYLINDER", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpSphere,     {"SPHERE", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpTorus,      {"TORUS", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpCone,       {"CONE", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpRectangle,  {"RECTANGLE", "NewEntity/Primitives"} );
-  createGeomAction( GEOMOp::OpDisk,       {"DISK", "NewEntity/Primitives"} );
+  createGeomAction( GEOMOp::OpBox,        "BOX" );
+  createGeomAction( GEOMOp::OpCylinder,   "CYLINDER" );
+  createGeomAction( GEOMOp::OpSphere,     "SPHERE" );
+  createGeomAction( GEOMOp::OpTorus,      "TORUS" );
+  createGeomAction( GEOMOp::OpCone,       "CONE" );
+  createGeomAction( GEOMOp::OpRectangle,  "RECTANGLE" );
+  createGeomAction( GEOMOp::OpDisk,       "DISK" );
 
-  createGeomAction( GEOMOp::OpPrism,       {"EXTRUSION", "NewEntity/Generation"} );
-  createGeomAction( GEOMOp::OpRevolution,  {"REVOLUTION", "NewEntity/Generation"} );
-  createGeomAction( GEOMOp::OpFilling,     {"FILLING", "NewEntity/Generation"} );
-  createGeomAction( GEOMOp::OpPipe,        {"PIPE", "NewEntity/Generation"} );
-  createGeomAction( GEOMOp::OpPipePath,    {"PIPE_PATH", "NewEntity/Generation"} );
-  createGeomAction( GEOMOp::OpThickness,   {"THICKNESS", "NewEntity/Generation"} );
+  createGeomAction( GEOMOp::OpPrism,       "EXTRUSION" );
+  createGeomAction( GEOMOp::OpRevolution,  "REVOLUTION" );
+  createGeomAction( GEOMOp::OpFilling,     "FILLING" );
+  createGeomAction( GEOMOp::OpPipe,        "PIPE" );
+  createGeomAction( GEOMOp::OpPipePath,    "PIPE_PATH" );
+  createGeomAction( GEOMOp::OpThickness,   "THICKNESS" );
 
-  createGeomAction( GEOMOp::OpGroupCreate, {"GROUP_CREATE", "NewEntity/Group"} );
-  createGeomAction( GEOMOp::OpGroupEdit,   {"GROUP_EDIT", "NewEntity/Group"} );
-  createGeomAction( GEOMOp::OpGroupUnion,  {"GROUP_UNION", "NewEntity/Group"} );
-  createGeomAction( GEOMOp::OpGroupIntersect, {"GROUP_INTERSECT", "NewEntity/Group"} );
-  createGeomAction( GEOMOp::OpGroupCut,    {"GROUP_CUT", "NewEntity/Group"} );
+  createGeomAction( GEOMOp::OpGroupCreate, "GROUP_CREATE" );
+  createGeomAction( GEOMOp::OpGroupEdit,   "GROUP_EDIT" );
+  createGeomAction( GEOMOp::OpGroupUnion,  "GROUP_UNION" );
+  createGeomAction( GEOMOp::OpGroupIntersect, "GROUP_INTERSECT" );
+  createGeomAction( GEOMOp::OpGroupCut,    "GROUP_CUT" );
 
-  createGeomAction( GEOMOp::OpCreateField, {"FIELD_CREATE", "NewEntity/Field"} );
-  createGeomAction( GEOMOp::OpEditField,   {"FIELD_EDIT", "NewEntity/Field"} );
+  createGeomAction( GEOMOp::OpCreateField, "FIELD_CREATE" );
+  createGeomAction( GEOMOp::OpEditField,   "FIELD_EDIT" );
 
-  createGeomAction( GEOMOp::OpReimport,    {"RELOAD_IMPORTED", "Selection"} );
+  createGeomAction( GEOMOp::OpReimport,    "RELOAD_IMPORTED" );
 
-  createGeomAction( GEOMOp::OpQuadFace,    {"Q_FACE", "NewEntity/Blocks"} );
-  createGeomAction( GEOMOp::OpHexaSolid,   {"HEX_SOLID", "NewEntity/Blocks"} );
+  createGeomAction( GEOMOp::OpQuadFace,    "Q_FACE" );
+  createGeomAction( GEOMOp::OpHexaSolid,   "HEX_SOLID" );
 
-  createGeomAction( GEOMOp::Op2dSketcher,  {"SKETCH", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::Op3dSketcher,  {"3DSKETCH", "NewEntity/Basic"} );
-  createGeomAction( GEOMOp::OpExplode,     {"EXPLODE", "NewEntity"} );
+  createGeomAction( GEOMOp::Op2dSketcher,  "SKETCH" );
+  createGeomAction( GEOMOp::Op3dSketcher,  "3DSKETCH" );
+  createGeomAction( GEOMOp::OpExplode,     "EXPLODE" );
 #ifdef WITH_OPENCV
-  createGeomAction( GEOMOp::OpFeatureDetect, {"FEATURE_DETECTION", "NewEntity"} );
+  createGeomAction( GEOMOp::OpFeatureDetect,"FEATURE_DETECTION" );
 #endif
-  createGeomAction( GEOMOp::OpPictureImport, {"PICTURE_IMPORT", "NewEntity"} );
-  createGeomAction( GEOMOp::Op2dPolylineEditor, {"CURVE_CREATOR", "NewEntity/Basic"} );
+  createGeomAction( GEOMOp::OpPictureImport,"PICTURE_IMPORT" );
+  createGeomAction( GEOMOp::Op2dPolylineEditor, "CURVE_CREATOR" );
 
-  createGeomAction( GEOMOp::OpEdge,        {"EDGE", "NewEntity/Build"} );
-  createGeomAction( GEOMOp::OpWire,        {"WIRE", "NewEntity/Build"} );
-  createGeomAction( GEOMOp::OpFace,        {"FACE", "NewEntity/Build"} );
-  createGeomAction( GEOMOp::OpShell,       {"SHELL", "NewEntity/Build"} );
-  createGeomAction( GEOMOp::OpSolid,       {"SOLID", "NewEntity/Build"} );
-  createGeomAction( GEOMOp::OpCompound,    {"COMPOUND", "NewEntity/Build"} );
+  createGeomAction( GEOMOp::OpEdge,        "EDGE" );
+  createGeomAction( GEOMOp::OpWire,        "WIRE" );
+  createGeomAction( GEOMOp::OpFace,        "FACE" );
+  createGeomAction( GEOMOp::OpShell,       "SHELL" );
+  createGeomAction( GEOMOp::OpSolid,       "SOLID" );
+  createGeomAction( GEOMOp::OpCompound,    "COMPOUND" );
 
-  createGeomAction( GEOMOp::OpFuse,        {"FUSE", "Operations/Boolean"} );
-  createGeomAction( GEOMOp::OpCommon,      {"COMMON", "Operations/Boolean"} );
-  createGeomAction( GEOMOp::OpCut,         {"CUT", "Operations/Boolean"} );
-  createGeomAction( GEOMOp::OpSection,     {"SECTION", "Operations/Boolean"} );
+  createGeomAction( GEOMOp::OpFuse,        "FUSE" );
+  createGeomAction( GEOMOp::OpCommon,      "COMMON" );
+  createGeomAction( GEOMOp::OpCut,         "CUT" );
+  createGeomAction( GEOMOp::OpSection,     "SECTION" );
 
-  createGeomAction( GEOMOp::OpTranslate,      {"TRANSLATION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpRotate,         {"ROTATION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpChangeLoc,      {"MODIFY_LOCATION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpMirror,         {"MIRROR", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpScale,          {"SCALE", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpOffset,         {"OFFSET", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpProjection,     {"PROJECTION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpProjOnCyl,      {"PROJ_ON_CYL", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpMultiTranslate, {"MUL_TRANSLATION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpMultiRotate,    {"MUL_ROTATION", "Operations/Transformation"} );
-  createGeomAction( GEOMOp::OpExtension,      {"EXTENSION", "Operations/Transformation"} );
+  createGeomAction( GEOMOp::OpTranslate,      "TRANSLATION" );
+  createGeomAction( GEOMOp::OpRotate,         "ROTATION" );
+  createGeomAction( GEOMOp::OpChangeLoc,      "MODIFY_LOCATION" );
+  createGeomAction( GEOMOp::OpMirror,         "MIRROR" );
+  createGeomAction( GEOMOp::OpScale,          "SCALE" );
+  createGeomAction( GEOMOp::OpOffset,         "OFFSET" );
+  createGeomAction( GEOMOp::OpProjection,     "PROJECTION" );
+  createGeomAction( GEOMOp::OpProjOnCyl,      "PROJ_ON_CYL" );
+  createGeomAction( GEOMOp::OpMultiTranslate, "MUL_TRANSLATION" );
+  createGeomAction( GEOMOp::OpMultiRotate,    "MUL_ROTATION" );
+  createGeomAction( GEOMOp::OpExtension,      "EXTENSION" );
 
-  createGeomAction( GEOMOp::OpPartition,      {"PARTITION", "Operations"} );
-  createGeomAction( GEOMOp::OpArchimede,      {"ARCHIMEDE", "Operations"} );
-  createGeomAction( GEOMOp::OpFillet3d,       {"FILLET", "Operations"} );
-  createGeomAction( GEOMOp::OpChamfer,        {"CHAMFER", "Operations"} );
-  createGeomAction( GEOMOp::OpShapesOnShape,  {"GET_SHAPES_ON_SHAPE", "Operations"} );
-  createGeomAction( GEOMOp::OpSharedShapes,   {"GET_SHARED_SHAPES", "Operations"} );
-  createGeomAction( GEOMOp::OpTransferData,   {"TRANSFER_DATA", "Operations"} );
-  createGeomAction( GEOMOp::OpExtraction,     {"EXTRACTION", "Operations"} );
-  createGeomAction( GEOMOp::OpExtrudedCut,    {"EXTRUDED_CUT", "Operations"} );
-  createGeomAction( GEOMOp::OpExtrudedBoss,   {"EXTRUDED_BOSS", "Operations"} );
-  createGeomAction( GEOMOp::OpFillet1d,       {"FILLET_1D", "Operations"} );
-  createGeomAction( GEOMOp::OpFillet2d,       {"FILLET_2D", "Operations"} );
+  createGeomAction( GEOMOp::OpPartition,      "PARTITION" );
+  createGeomAction( GEOMOp::OpArchimede,      "ARCHIMEDE" );
+  createGeomAction( GEOMOp::OpFillet3d,       "FILLET" );
+  createGeomAction( GEOMOp::OpChamfer,        "CHAMFER" );
+  createGeomAction( GEOMOp::OpShapesOnShape,  "GET_SHAPES_ON_SHAPE" );
+  createGeomAction( GEOMOp::OpSharedShapes,   "GET_SHARED_SHAPES" );
+  createGeomAction( GEOMOp::OpTransferData,   "TRANSFER_DATA" );
+  createGeomAction( GEOMOp::OpExtraction,     "EXTRACTION" );
+  createGeomAction( GEOMOp::OpExtrudedCut,    "EXTRUDED_CUT" );
+  createGeomAction( GEOMOp::OpExtrudedBoss,   "EXTRUDED_BOSS" );
+  createGeomAction( GEOMOp::OpFillet1d,       "FILLET_1D" );
+  createGeomAction( GEOMOp::OpFillet2d,       "FILLET_2D" );
 
-  createGeomAction( GEOMOp::OpMultiTransform, {"MUL_TRANSFORM", "Operations/Blocks"} );
-  createGeomAction( GEOMOp::OpExplodeBlock,   {"EXPLODE_BLOCKS", "Operations/Blocks"} );
-  createGeomAction( GEOMOp::OpPropagate,      {"PROPAGATE", "Operations/Blocks"} );
+  createGeomAction( GEOMOp::OpMultiTransform, "MUL_TRANSFORM" );
+  createGeomAction( GEOMOp::OpExplodeBlock,   "EXPLODE_BLOCKS" );
+  createGeomAction( GEOMOp::OpPropagate,      "PROPAGATE" );
 
-  createGeomAction( GEOMOp::OpSewing,           {"SEWING", "Repair"} );
-  createGeomAction( GEOMOp::OpGlueFaces,        {"GLUE_FACES", "Repair"} );
-  createGeomAction( GEOMOp::OpGlueEdges,        {"GLUE_EDGES", "Repair"} );
-  createGeomAction( GEOMOp::OpLimitTolerance,   {"LIMIT_TOLERANCE", "Repair"} );
-  createGeomAction( GEOMOp::OpSuppressFaces,    {"SUPPRESS_FACES", "Repair"} );
-  createGeomAction( GEOMOp::OpSuppressHoles,    {"SUPPERSS_HOLES", "Repair"} );
-  createGeomAction( GEOMOp::OpShapeProcess,     {"SHAPE_PROCESS", "Repair"} );
-  createGeomAction( GEOMOp::OpCloseContour,     {"CLOSE_CONTOUR", "Repair"} );
-  createGeomAction( GEOMOp::OpRemoveIntWires,   {"SUPPRESS_INT_WIRES", "Repair"} );
-  createGeomAction( GEOMOp::OpAddPointOnEdge,   {"POINT_ON_EDGE", "Repair"} );
-  createGeomAction( GEOMOp::OpFreeBoundaries,   {"CHECK_FREE_BNDS", "Repair"} );
-  createGeomAction( GEOMOp::OpFreeFaces,        {"CHECK_FREE_FACES", "Repair"} );
-  createGeomAction( GEOMOp::OpOrientation,      {"CHANGE_ORIENTATION", "Repair"} );
-  createGeomAction( GEOMOp::OpRemoveWebs,       {"REMOVE_WEBS", "Repair"} );
-  createGeomAction( GEOMOp::OpRemoveExtraEdges, {"REMOVE_EXTRA_EDGES", "Repair"} );
-  createGeomAction( GEOMOp::OpFuseEdges,        {"FUSE_EDGES", "Repair"} );
-  createGeomAction( GEOMOp::OpUnionFaces,       {"UNION_FACES", "Repair"} );
-  createGeomAction( GEOMOp::OpInspectObj,       {"INSPECT_OBJECT", "Repair"} );
+  createGeomAction( GEOMOp::OpSewing,           "SEWING" );
+  createGeomAction( GEOMOp::OpGlueFaces,        "GLUE_FACES" );
+  createGeomAction( GEOMOp::OpGlueEdges,        "GLUE_EDGES" );
+  createGeomAction( GEOMOp::OpLimitTolerance,   "LIMIT_TOLERANCE" );
+  createGeomAction( GEOMOp::OpSuppressFaces,    "SUPPRESS_FACES" );
+  createGeomAction( GEOMOp::OpSuppressHoles,    "SUPPERSS_HOLES" );
+  createGeomAction( GEOMOp::OpShapeProcess,     "SHAPE_PROCESS" );
+  createGeomAction( GEOMOp::OpCloseContour,     "CLOSE_CONTOUR" );
+  createGeomAction( GEOMOp::OpRemoveIntWires,   "SUPPRESS_INT_WIRES" );
+  createGeomAction( GEOMOp::OpAddPointOnEdge,   "POINT_ON_EDGE" );
+  createGeomAction( GEOMOp::OpFreeBoundaries,   "CHECK_FREE_BNDS" );
+  createGeomAction( GEOMOp::OpFreeFaces,        "CHECK_FREE_FACES" );
+  createGeomAction( GEOMOp::OpOrientation,      "CHANGE_ORIENTATION" );
+  createGeomAction( GEOMOp::OpRemoveWebs,       "REMOVE_WEBS" );
+  createGeomAction( GEOMOp::OpRemoveExtraEdges, "REMOVE_EXTRA_EDGES" );
+  createGeomAction( GEOMOp::OpFuseEdges,        "FUSE_EDGES" );
+  createGeomAction( GEOMOp::OpUnionFaces,       "UNION_FACES" );
+  createGeomAction( GEOMOp::OpInspectObj,       "INSPECT_OBJECT" );
 
-  createGeomAction( GEOMOp::OpPointCoordinates, {"POINT_COORDS", "Inspection"} );
-  createGeomAction( GEOMOp::OpProperties,       {"BASIC_PROPS", "Inspection"} );
-  createGeomAction( GEOMOp::OpCenterMass,       {"MASS_CENTER", "Inspection"} );
-  createGeomAction( GEOMOp::OpInertia,          {"INERTIA", "Inspection"} );
-  createGeomAction( GEOMOp::OpNormale,          {"NORMALE", "Inspection"} );
-  createGeomAction( GEOMOp::OpBoundingBox,      {"BND_BOX", "Inspection/Dimensions"} );
-  createGeomAction( GEOMOp::OpMinDistance,      {"MIN_DIST", "Inspection/Dimensions"} );
-  createGeomAction( GEOMOp::OpAngle,            {"MEASURE_ANGLE", "Inspection/Dimensions"} );
-  createGeomAction( GEOMOp::OpManageDimensions, {"MANAGE_DIMENSIONS", "Inspection/Dimensions"} );
-  createGeomAction( GEOMOp::OpAnnotation,       {"ANNOTATION", "Inspection"} );
-  createGeomAction( GEOMOp::OpEditAnnotation,   {"EDIT_ANNOTATION", "Inspection/ANNOTATION"} );
-  createGeomAction( GEOMOp::OpDeleteAnnotation, {"DELETE_ANNOTATION", "Inspection/ANNOTATION"} );
+  createGeomAction( GEOMOp::OpPointCoordinates, "POINT_COORDS" );
+  createGeomAction( GEOMOp::OpProperties,       "BASIC_PROPS" );
+  createGeomAction( GEOMOp::OpCenterMass,       "MASS_CENTER" );
+  createGeomAction( GEOMOp::OpInertia,          "INERTIA" );
+  createGeomAction( GEOMOp::OpNormale,          "NORMALE" );
+  createGeomAction( GEOMOp::OpBoundingBox,      "BND_BOX" );
+  createGeomAction( GEOMOp::OpMinDistance,      "MIN_DIST" );
+  createGeomAction( GEOMOp::OpAngle,            "MEASURE_ANGLE" );
+  createGeomAction( GEOMOp::OpManageDimensions, "MANAGE_DIMENSIONS" );
+  createGeomAction( GEOMOp::OpAnnotation,       "ANNOTATION" );
+  createGeomAction( GEOMOp::OpEditAnnotation,   "EDIT_ANNOTATION" );
+  createGeomAction( GEOMOp::OpDeleteAnnotation, "DELETE_ANNOTATION" );
 
-  createGeomAction( GEOMOp::OpTolerance,        {"TOLERANCE", "Inspection"} );
-  createGeomAction( GEOMOp::OpWhatIs,           {"WHAT_IS", "Inspection"} );
-  createGeomAction( GEOMOp::OpCheckShape,       {"CHECK", "Inspection"} );
-  createGeomAction( GEOMOp::OpCheckCompound,    {"CHECK_COMPOUND", "Inspection"} );
-  createGeomAction( GEOMOp::OpGetNonBlocks,     {"GET_NON_BLOCKS", "Inspection"} );
-  createGeomAction( GEOMOp::OpCheckSelfInters,  {"CHECK_SELF_INTERSECTIONS", "Inspection"} );
-  createGeomAction( GEOMOp::OpFastCheckInters,  {"FAST_CHECK_INTERSECTIONS", "Inspection"} );
+  createGeomAction( GEOMOp::OpTolerance,        "TOLERANCE" );
+  createGeomAction( GEOMOp::OpWhatIs,           "WHAT_IS" );
+  createGeomAction( GEOMOp::OpCheckShape,       "CHECK" );
+  createGeomAction( GEOMOp::OpCheckCompound,    "CHECK_COMPOUND" );
+  createGeomAction( GEOMOp::OpGetNonBlocks,     "GET_NON_BLOCKS" );
+  createGeomAction( GEOMOp::OpCheckSelfInters,  "CHECK_SELF_INTERSECTIONS" );
+  createGeomAction( GEOMOp::OpFastCheckInters,  "FAST_CHECK_INTERSECTIONS" );
 #ifndef DISABLE_PLOT2DVIEWER
-  createGeomAction( GEOMOp::OpShapeStatistics,  {"SHAPE_STATISTICS", "Inspection"} );
+  createGeomAction( GEOMOp::OpShapeStatistics,  "SHAPE_STATISTICS" );
 #endif
 
 #ifndef DISABLE_PYCONSOLE
 #ifdef _DEBUG_ // PAL16821
-  createGeomAction( GEOMOp::OpCheckGeom,        {"CHECK_GEOMETRY", "Tools"} );
+  createGeomAction( GEOMOp::OpCheckGeom,        "CHECK_GEOMETRY" );
 #endif
 #endif
 
-  createGeomAction( GEOMOp::OpMaterialsLibrary,   {"MATERIALS_LIBRARY", "Tools"} );
-  createGeomAction( GEOMOp::OpDMWireframe,        {"WIREFRAME", "View/DisplayMode"} );
-  createGeomAction( GEOMOp::OpDMShading,          {"SHADING", "View/DisplayMode"} );
-  createGeomAction( GEOMOp::OpDMShadingWithEdges, {"SHADING_WITH_EDGES", "View/DisplayMode"} );
-  createGeomAction( GEOMOp::OpDMTexture,          {"TEXTURE", "View/DisplayMode"} );
-  createGeomAction( GEOMOp::OpShowAll,          {"DISPLAY_ALL", "View"} );
-  createGeomAction( GEOMOp::OpHideAll,          {"ERASE_ALL", "View"} );
-  createGeomAction( GEOMOp::OpShow,             {"DISPLAY", "View"} );
-  createGeomAction( GEOMOp::OpSwitchVectors,    {"VECTOR_MODE", "View/DisplayMode"});
-  createGeomAction( GEOMOp::OpSwitchVertices,   {"VERTICES_MODE", "View/DisplayMode"});
-  createGeomAction( GEOMOp::OpSwitchName,       {"NAME_MODE", "View/DisplayMode"});
-  createGeomAction( GEOMOp::OpSelectVertex,     {"VERTEX_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectEdge,       {"EDGE_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectWire,       {"WIRE_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectFace,       {"FACE_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectShell,      {"SHELL_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectSolid,      {"SOLID_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectCompound,   {"COMPOUND_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpSelectAll,        {"ALL_SEL_ONLY", "Selection"}, "", true );
-  createGeomAction( GEOMOp::OpShowOnly,         {"DISPLAY_ONLY", "View"} );
-  createGeomAction( GEOMOp::OpShowOnlyChildren, {"SHOW_ONLY_CHILDREN", "View"} );
-  createGeomAction( GEOMOp::OpBringToFront,     {"BRING_TO_FRONT", "View"}, "", true );
-  createGeomAction( GEOMOp::OpClsBringToFront,  {"CLS_BRING_TO_FRONT", "View"} );
-  createGeomAction( GEOMOp::OpHide,             {"ERASE", "View"} );
+  createGeomAction( GEOMOp::OpMaterialsLibrary,   "MATERIALS_LIBRARY" );
+  createGeomAction( GEOMOp::OpDMWireframe,        "WIREFRAME" );
+  createGeomAction( GEOMOp::OpDMShading,          "SHADING" );
+  createGeomAction( GEOMOp::OpDMShadingWithEdges, "SHADING_WITH_EDGES" );
+  createGeomAction( GEOMOp::OpDMTexture,          "TEXTURE" );
+  createGeomAction( GEOMOp::OpShowAll,          "DISPLAY_ALL" );
+  createGeomAction( GEOMOp::OpHideAll,          "ERASE_ALL" );
+  createGeomAction( GEOMOp::OpShow,             "DISPLAY" );
+  createGeomAction( GEOMOp::OpSwitchVectors,    "VECTOR_MODE");
+  createGeomAction( GEOMOp::OpSwitchVertices,   "VERTICES_MODE");
+  createGeomAction( GEOMOp::OpSwitchName,       "NAME_MODE");
+  createGeomAction( GEOMOp::OpSelectVertex,     "VERTEX_SEL_ONLY" ,"", 0, true );
+  createGeomAction( GEOMOp::OpSelectEdge,       "EDGE_SEL_ONLY", "", 0, true );
+  createGeomAction( GEOMOp::OpSelectWire,       "WIRE_SEL_ONLY", "",  0, true );
+  createGeomAction( GEOMOp::OpSelectFace,       "FACE_SEL_ONLY", "", 0, true );
+  createGeomAction( GEOMOp::OpSelectShell,      "SHELL_SEL_ONLY", "",  0, true );
+  createGeomAction( GEOMOp::OpSelectSolid,      "SOLID_SEL_ONLY", "", 0, true );
+  createGeomAction( GEOMOp::OpSelectCompound,   "COMPOUND_SEL_ONLY", "",  0, true );
+  createGeomAction( GEOMOp::OpSelectAll,        "ALL_SEL_ONLY", "",  0, true );
+  createGeomAction( GEOMOp::OpShowOnly,         "DISPLAY_ONLY" );
+  createGeomAction( GEOMOp::OpShowOnlyChildren, "SHOW_ONLY_CHILDREN" );
+  createGeomAction( GEOMOp::OpBringToFront,     "BRING_TO_FRONT", "", 0, true );
+  createGeomAction( GEOMOp::OpClsBringToFront,  "CLS_BRING_TO_FRONT" );
+  createGeomAction( GEOMOp::OpHide,             "ERASE" );
 
-  createGeomAction( GEOMOp::OpWireframe,        {"POP_WIREFRAME", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpShading,          {"POP_SHADING", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpShadingWithEdges, {"POP_SHADING_WITH_EDGES", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpTexture,          {"POP_TEXTURE", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpEdgeWidth,        {"EDGE_WIDTH", "Selection"});
-  createGeomAction( GEOMOp::OpIsosWidth,        {"ISOS_WIDTH", "Selection"});
-  createGeomAction( GEOMOp::OpVectors,          {"POP_VECTORS", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpVertices,         {"POP_VERTICES", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpShowName,         {"POP_SHOW_NAME", "Selection/DisplayMode"}, "", true );
-  createGeomAction( GEOMOp::OpDeflection,       {"POP_DEFLECTION", "Selection"} );
-  createGeomAction( GEOMOp::OpColor,            {"POP_COLOR", "Selection"} );
-  createGeomAction( GEOMOp::OpSetTexture,       {"POP_SETTEXTURE", "Selection"} );
-  createGeomAction( GEOMOp::OpTransparency,     {"POP_TRANSPARENCY", "Selection"} );
-  createGeomAction( GEOMOp::OpIsos,             {"POP_ISOS", "Selection"} );
-  createGeomAction( GEOMOp::OpAutoColor,        {"POP_AUTO_COLOR", "Selection"} );
-  createGeomAction( GEOMOp::OpNoAutoColor,      {"POP_DISABLE_AUTO_COLOR", "Selection"} );
-  createGeomAction( GEOMOp::OpGroupCreatePopup, {"POP_CREATE_GROUP", "Selection"} );
-  createGeomAction( GEOMOp::OpEditFieldPopup,   {"POP_EDIT_FIELD", "Selection"} );
-  createGeomAction( GEOMOp::OpDiscloseChildren, {"POP_DISCLOSE_CHILDREN", "Selection"} );
-  createGeomAction( GEOMOp::OpConcealChildren,  {"POP_CONCEAL_CHILDREN", "Selection"} );
-  createGeomAction( GEOMOp::OpUnpublishObject,  {"POP_UNPUBLISH_OBJ", "Selection"} );
-  createGeomAction( GEOMOp::OpPublishObject,    {"POP_PUBLISH_OBJ", "Selection"} );
-  createGeomAction( GEOMOp::OpPointMarker,      {"POP_POINT_MARKER", "Selection"} );
-  createGeomAction( GEOMOp::OpMaterialProperties,   {"POP_MATERIAL_PROPERTIES", "Selection"} );
-  createGeomAction( GEOMOp::OpPredefMaterCustom,    {"POP_PREDEF_MATER_CUSTOM", "Selection"} );
-  createGeomAction( GEOMOp::OpMaterialMenu, {"POP_MATERIAL_PROPERTIES", "Selection"});
+  createGeomAction( GEOMOp::OpWireframe,        "POP_WIREFRAME", "", 0, true );
+  createGeomAction( GEOMOp::OpShading,          "POP_SHADING", "", 0, true );
+  createGeomAction( GEOMOp::OpShadingWithEdges, "POP_SHADING_WITH_EDGES", "", 0, true );
+  createGeomAction( GEOMOp::OpTexture,          "POP_TEXTURE", "", 0, true );
+  createGeomAction( GEOMOp::OpEdgeWidth,        "EDGE_WIDTH");
+  createGeomAction( GEOMOp::OpIsosWidth,        "ISOS_WIDTH");
+  createGeomAction( GEOMOp::OpVectors,          "POP_VECTORS", "", 0, true );
+  createGeomAction( GEOMOp::OpVertices,         "POP_VERTICES", "", 0, true );
+  createGeomAction( GEOMOp::OpShowName,         "POP_SHOW_NAME", "", 0, true );
+  createGeomAction( GEOMOp::OpDeflection,       "POP_DEFLECTION" );
+  createGeomAction( GEOMOp::OpColor,            "POP_COLOR" );
+  createGeomAction( GEOMOp::OpSetTexture,       "POP_SETTEXTURE" );
+  createGeomAction( GEOMOp::OpTransparency,     "POP_TRANSPARENCY" );
+  createGeomAction( GEOMOp::OpIsos,             "POP_ISOS" );
+  createGeomAction( GEOMOp::OpAutoColor,        "POP_AUTO_COLOR" );
+  createGeomAction( GEOMOp::OpNoAutoColor,      "POP_DISABLE_AUTO_COLOR" );
+  createGeomAction( GEOMOp::OpGroupCreatePopup, "POP_CREATE_GROUP" );
+  createGeomAction( GEOMOp::OpEditFieldPopup,   "POP_EDIT_FIELD" );
+  createGeomAction( GEOMOp::OpDiscloseChildren, "POP_DISCLOSE_CHILDREN" );
+  createGeomAction( GEOMOp::OpConcealChildren,  "POP_CONCEAL_CHILDREN" );
+  createGeomAction( GEOMOp::OpUnpublishObject,  "POP_UNPUBLISH_OBJ" );
+  createGeomAction( GEOMOp::OpPublishObject,    "POP_PUBLISH_OBJ" );
+  createGeomAction( GEOMOp::OpPointMarker,      "POP_POINT_MARKER" );
+  createGeomAction( GEOMOp::OpMaterialProperties,   "POP_MATERIAL_PROPERTIES" );
+  createGeomAction( GEOMOp::OpPredefMaterCustom,    "POP_PREDEF_MATER_CUSTOM" );
+  createGeomAction( GEOMOp::OpMaterialMenu, "POP_MATERIAL_PROPERTIES");
   action(GEOMOp::OpMaterialMenu)->setMenu( new QMenu() );
-  createGeomAction( GEOMOp::OpCreateFolder, {"POP_CREATE_FOLDER", "Selection"} );
-  createGeomAction( GEOMOp::OpSortChildren, {"POP_SORT_CHILD_ITEMS", "Selection"} );
+  createGeomAction( GEOMOp::OpCreateFolder, "POP_CREATE_FOLDER" );
+  createGeomAction( GEOMOp::OpSortChildren, "POP_SORT_CHILD_ITEMS" );
 #ifndef DISABLE_GRAPHICSVIEW
-  createGeomAction( GEOMOp::OpShowDependencyTree, {"POP_SHOW_DEPENDENCY_TREE", "Selection"} );
+  createGeomAction( GEOMOp::OpShowDependencyTree, "POP_SHOW_DEPENDENCY_TREE" );
 #endif
-  createGeomAction( GEOMOp::OpReduceStudy,        {"POP_REDUCE_STUDY", "Selection"} );
-  createGeomAction( GEOMOp::OpShowAllDimensions,  {"POP_SHOW_ALL_DIMENSIONS", "Selection"} );
-  createGeomAction( GEOMOp::OpHideAllDimensions,  {"POP_HIDE_ALL_DIMENSIONS", "Selection"} );
-  createGeomAction( GEOMOp::OpShowAllAnnotations, {"POP_SHOW_ALL_ANNOTATIONS", "Selection"} );
-  createGeomAction( GEOMOp::OpHideAllAnnotations, {"POP_HIDE_ALL_ANNOTATIONS", "Selection"} );
+  createGeomAction( GEOMOp::OpReduceStudy,        "POP_REDUCE_STUDY" );
+  createGeomAction( GEOMOp::OpShowAllDimensions,  "POP_SHOW_ALL_DIMENSIONS" );
+  createGeomAction( GEOMOp::OpHideAllDimensions,  "POP_HIDE_ALL_DIMENSIONS" );
+  createGeomAction( GEOMOp::OpShowAllAnnotations, "POP_SHOW_ALL_ANNOTATIONS" );
+  createGeomAction( GEOMOp::OpHideAllAnnotations, "POP_HIDE_ALL_ANNOTATIONS" );
 
   // Create actions for increase/decrease transparency shortcuts
   createGeomAction( GEOMOp::OpIncrTransparency, "", "", 0, false,
-                    "Selection/POP_TRANSPARENCY/Increase");
+                    "Transparency/Increase");
   createGeomAction( GEOMOp::OpDecrTransparency, "", "", 0, false,
-                    "Selection/POP_TRANSPARENCY/Decrease");
+                    "Transparency/Decrease");
 
   // Create actions for increase/decrease number of isolines
   createGeomAction( GEOMOp::OpIncrNbIsos, "", "", 0, false,
-                    "Selection/POP_ISOS/Increase number");
+                    "Isolines/Increase number");
   createGeomAction( GEOMOp::OpDecrNbIsos, "", "", 0, false,
-                    "Selection/POP_ISOS/Decrease number");
+                    "Isolines/Decrease number");
 
   //createGeomAction( GEOMOp::OpPipeTShape, "PIPETSHAPE" );
   //createGeomAction( GEOMOp::OpDividedDisk, "DIVIDEDDISK" );
@@ -1865,7 +1849,7 @@ void GeometryGUI::addPluginActions()
                     application()->desktop(),
                     false /*toggle*/,
                     this, SLOT( OnGUIEvent() ),
-                    QString::fromStdString("Plugins/" + pdata.name + "/" + adata.label)
+                    QString::fromStdString(pdata.name + "/" + adata.label)
                   );
 
       int menuId = -1;

src/GEOMGUI/GeometryGUI.h

@@ -203,11 +203,6 @@ private:
                                                 const QString& icon_id = QString(""),
                                                 const int key = 0, const bool toggle = false);
 
-  void                        createGeomAction( const int inMenuIdx,
-                                                const QPair<QString, QString>& inModuleIDLastTokenAndPrefix,
-                                                const QString& iconID = QString(),
-                                                const bool toggle = false);
-
   void                        createPopupItem( const int, const QString& clients, const QString& types,
                                                const bool isSingle = false, const int isVisible = -1,
                                                const bool isExpandAll = false, const bool isOCC = false,

src/GEOMImpl/CMakeLists.txt

@@ -22,7 +22,6 @@
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${PTHREAD_INCLUDE_DIR}
   ${KERNEL_INCLUDE_DIRS}
   ${PYTHON_INCLUDE_DIRS}
@@ -47,7 +46,6 @@ ADD_DEFINITIONS(
 
 # libraries to link to
 SET(_link_LIBRARIES
-  ${CommonGeomLib_GeomAnaTool}
   ${OpenCASCADE_ModelingAlgorithms_LIBRARIES}
   ${PYTHON_LIBRARIES}
   ShHealOper GEOMbasic BlockFix GEOMAlgo GEOMUtils GEOMSketcher GEOMArchimede XAO

src/GEOMImpl/GEOMImpl_ConformityDriver.cxx

@@ -42,6 +42,28 @@
 
 namespace
 {
+  //=======================================================================
+  //function : ConvertShapesToIndices
+  //purpose  : Convert sub-shapes of shapes to sequence of indices
+  //=======================================================================
+  Handle(TColStd_HArray1OfInteger) ConvertShapesToIndices(const TopoDS_Shape& theShape,
+                                                          const TopTools_ListOfShape& theShapes)
+  {
+    Handle(TColStd_HArray1OfInteger) aSeqOfIDs = new TColStd_HArray1OfInteger(1, theShapes.Size());
+
+    TopTools_IndexedMapOfShape anIndices;
+    TopExp::MapShapes(theShape, anIndices);
+
+    TopTools_ListIteratorOfListOfShape itSub(theShapes);
+    for (int index = 1; itSub.More(); itSub.Next(), ++index)
+    {
+      int id = anIndices.FindIndex(itSub.Value());
+      aSeqOfIDs->SetValue(index, id);
+    }
+
+    return aSeqOfIDs;
+  }
+
   //=======================================================================
   //function : ConvertShapesToIndices
   //purpose  : Convert list of pair shapes to sequence of indices
@@ -181,8 +203,6 @@ Standard_Real GEOMImpl_ConformityDriver::updateTolerance(const TopoDS_Shape& the
       case TopAbs_FACE:
         aCurTolerance = BRep_Tool::Tolerance(TopoDS::Face(anExp.Value()));
         break;
-      default:
-        break;
       }
       aTolerance = Min(aTolerance, aCurTolerance);
     }
@@ -208,8 +228,6 @@ Standard_Real GEOMImpl_ConformityDriver::updateTolerance(const TopoDS_Shape& the
       case TopAbs_FACE:
         aCurTolerance = BRep_Tool::Tolerance(TopoDS::Face(anExp.Value()));
         break;
-      default:
-        break;
       }
       aResTol = Max(aResTol, aCurTolerance);
     }

src/GEOMImpl/GEOMImpl_IMeasureOperations.cxx

@@ -34,9 +34,6 @@
 #include <GEOMImpl_IConformity.hxx>
 #include <GEOMImpl_ConformityDriver.hxx>
 
-#include <GEOMImpl_IPartition.hxx>
-#include <GEOMImpl_PartitionDriver.hxx>
-
 #include <GEOMUtils.hxx>
 
 #include <GEOMAlgo_AlgoTools.hxx>
@@ -47,12 +44,6 @@
 
 #include <utilities.h>
 
-#include <Basics_OCCTVersion.hxx>
-
-// CommonGeomLib Includes
-#include <GeomAnaTool_Tools.hxx>
-#include <GeomAnaTool_ExtractBOPFailure.hxx>
-
 // OCCT Includes
 #include <Bnd_Box.hxx>
 #include <BOPAlgo_CheckerSI.hxx>
@@ -183,7 +174,7 @@ GEOMImpl_IMeasureOperations::ShapeKind GEOMImpl_IMeasureOperations::KindOfShape
     theDoubles->Append(aC.X());
     theDoubles->Append(aC.Y());
     theDoubles->Append(aC.Z());
-
+    
     gp_Dir aD = anAx3.XDirection();
     theDoubles->Append(aD.X());
     theDoubles->Append(aD.Y());
@@ -587,7 +578,7 @@ GEOMImpl_IMeasureOperations::ShapeKind GEOMImpl_IMeasureOperations::KindOfShape
           {
             // (+) geompy.kind.PLANAR  xo yo zo  dx dy dz  nb_edges nb_vertices
             aKind = SK_PLANAR;
-
+            
             theIntegers->Append(anInfo.NbSubShapes(TopAbs_EDGE));
             theIntegers->Append(anInfo.NbSubShapes(TopAbs_VERTEX));
           }
@@ -1383,7 +1374,7 @@ Handle(GEOM_Object) GEOMImpl_IMeasureOperations::GetBoundingBox
 
   //Make a Python command
   GEOM::TPythonDump aPd(aFunction);
-
+  
   aPd << aBnd << " = geompy.MakeBoundingBox(" << theShape;
 
   if (precise) {
@@ -1467,7 +1458,7 @@ void GEOMImpl_IMeasureOperations::GetTolerance
 //=============================================================================
 bool GEOMImpl_IMeasureOperations::CheckShape (Handle(GEOM_Object)     theShape,
                                               const Standard_Boolean  theIsCheckGeom,
-                                              std::list<GeomAnaTool::ShapeError> &theErrors)
+                                              std::list<ShapeError>  &theErrors)
 {
   SetErrorCode(KO);
   theErrors.clear();
@@ -1491,7 +1482,7 @@ bool GEOMImpl_IMeasureOperations::CheckShape (Handle(GEOM_Object)     theShape,
     if (ana.IsValid()) {
       isValid = true;
     } else {
-      GeomAnaTool::FillErrors(ana, aShape, theErrors);
+      FillErrors(ana, aShape, theErrors);
     }
   }
   catch (Standard_Failure& aFail) {
@@ -1510,7 +1501,7 @@ bool GEOMImpl_IMeasureOperations::CheckShape (Handle(GEOM_Object)     theShape,
 //=============================================================================
 TCollection_AsciiString GEOMImpl_IMeasureOperations::PrintShapeErrors
                                  (Handle(GEOM_Object)          theShape,
-                                  const std::list<GeomAnaTool::ShapeError> &theErrors)
+                                  const std::list<ShapeError> &theErrors)
 {
   TCollection_AsciiString aDump;
 
@@ -1534,7 +1525,7 @@ TCollection_AsciiString GEOMImpl_IMeasureOperations::PrintShapeErrors
   if (!theErrors.empty()) {
     // The shape is not valid. Prepare errors for dump.
     TopTools_IndexedMapOfShape anIndices;
-    std::list<GeomAnaTool::ShapeError>::const_iterator anIter = theErrors.begin();
+    std::list<ShapeError>::const_iterator anIter = theErrors.begin();
     Standard_Integer nbv, nbe, nbw, nbf, nbs, nbo;
     nbv = nbe = nbw = nbf = nbs = nbo = 0;
 
@@ -1720,111 +1711,6 @@ TCollection_AsciiString GEOMImpl_IMeasureOperations::PrintShapeErrors
   return aDump;
 }
 
-
-//=============================================================================
-/*!
- *  ExtractBOPFailure
- */
-//=============================================================================
-bool GEOMImpl_IMeasureOperations::ExtractBOPFailure
-                       (const Handle(TColStd_HSequenceOfTransient)& theShapes,
-                        const bool                                  theUseTimer,
-                        const bool                                  theTopoOnly,
-                        const bool                                  theRunParallel,
-                        const bool                                  theDoExact,
-                        Handle(GEOM_Object)&                        theResultShape,
-                        std::list<GeomAnaTool::ShapeError>&         theErrors)
-{
-  SetErrorCode(OK);
-  theErrors.clear();
-
-  if (theShapes.IsNull()) return false;
-
-  Standard_Integer aNbShapes = theShapes->Length();
-  if (!aNbShapes) return false;
-
-  Handle(TColStd_HSequenceOfTransient) aShapesSeq = new TColStd_HSequenceOfTransient;
-
-  TopTools_ListOfShape aList;
-  for (int i = 1; i <= aNbShapes; i++) {
-    Handle(GEOM_Object) aGeomObj = Handle(GEOM_Object)::DownCast(theShapes->Value(i));
-    if (aGeomObj.IsNull())
-      continue;
-
-    Handle(GEOM_Function) aRefShape = aGeomObj->GetLastFunction();
-    if (aRefShape.IsNull())
-      continue;
-
-    TopoDS_Shape aShape = aRefShape->GetValue();
-    if (aShape.IsNull())
-      continue;
-
-    aShapesSeq->Append(aRefShape);
-    aList.Append(aShape);
-  }
-
-  // Call the GeomAnaTool API to extract BOP failures
-  bool isValid = false;
-  try
-  {
-    OCC_CATCH_SIGNALS;
-    GeomAnaTool_ExtractBOPFailure aTool (aList);
-    aTool.SetUseTimer(theUseTimer);
-    aTool.SetCheckGeometry(!theTopoOnly); // Either topo only or topo+geometry
-    aTool.SetRunParallel(theRunParallel);
-    aTool.SetExactCheck(theDoExact);
-    aTool.Perform();
-
-    // Check, if there are execution errors
-    const Handle(Message_Report) aReport = aTool.GetReport();
-    Standard_SStream anOS;
-    aReport->Dump(anOS);
-    if (!anOS.str().empty()) {
-      SetErrorCode(anOS.str().c_str());
-      if (aTool.HasFailureAlerts()) {
-        return false;
-      }
-    }
-
-    TopoDS_Shape aShapeRes = aTool.Result();
-    if (aShapeRes.IsNull()) {
-      return false;
-    }
-
-    // Create Partition object.
-    theResultShape = GetEngine()->AddObject(GEOM_PARTITION);
-    Handle(GEOM_Function) aFunction = theResultShape->AddFunction
-      (GEOMImpl_PartitionDriver::GetID(), PARTITION_GENERAL_FUSE);
-    // For creation information filling
-    GEOMImpl_IPartition aCI (aFunction);
-    aCI.SetShapes(aShapesSeq);
-    // Set General Fuse result right here
-    // (without driver execution, as we already have the result shape)
-    aFunction->SetValue(aShapeRes);
-
-    theErrors = aTool.ShapeErrors();
-    isValid = theErrors.size() == 0;
-
-    //Make a Python command
-    GEOM::TPythonDump aPD (aFunction);
-    aPD << "(isBOPFailure, " << theResultShape
-        << ", anErrors) = geompy.ExtractBOPFailure([";
-    for (int i = 1; i <= aNbShapes; i++) {
-      aPD << Handle(GEOM_Object)::DownCast(theShapes->Value(i));
-      if (i < aNbShapes) aPD << ", ";
-    }
-    aPD << "], " << theUseTimer << ", " << theTopoOnly
-        << ", " << theRunParallel << ", " << theDoExact << ")";
-  }
-  catch(Standard_Failure& aFail)
-  {
-    SetErrorCode(aFail.GetMessageString());
-    return false;
-  }
-
-  return isValid;
-}
-
 //=============================================================================
 /*!
  *  CheckSelfIntersections
@@ -1944,11 +1830,11 @@ bool GEOMImpl_IMeasureOperations::CheckSelfIntersectionsFast
 
   // Launch the checker
   aTool.Perform();
-
+  
   const BRepExtrema_MapOfIntegerPackedMapOfInteger& intersections = aTool.OverlapElements();
-
+  
   std::set<Standard_Integer> processed;
-
+  
   for (BRepExtrema_MapOfIntegerPackedMapOfInteger::Iterator it(intersections); it.More(); it.Next()) {
     Standard_Integer idxLeft = it.Key();
     if (processed.count(idxLeft) > 0) continue; // already added
@@ -2066,14 +1952,14 @@ bool GEOMImpl_IMeasureOperations::FastIntersect (Handle(GEOM_Object) theShape1,
 
   // 1. Launch the checker
   aBSP.Perform();
-
+ 
   // 2. Get sets of IDs of overlapped faces
   for (BRepExtrema_MapOfIntegerPackedMapOfInteger::Iterator anIt1 (aBSP.OverlapSubShapes1()); anIt1.More(); anIt1.Next())
   {
     const TopoDS_Shape& aS1 = aBSP.GetSubShape1(anIt1.Key());
     theIntersections1->Append(anIndices1.FindIndex(aS1));
   }
-
+  
   for (BRepExtrema_MapOfIntegerPackedMapOfInteger::Iterator anIt2 (aBSP.OverlapSubShapes2()); anIt2.More(); anIt2.Next())
   {
     const TopoDS_Shape& aS2 = aBSP.GetSubShape2(anIt2.Key());
@@ -2433,6 +2319,12 @@ Standard_Integer GEOMImpl_IMeasureOperations::ClosestPoints (Handle(GEOM_Object)
   try {
     OCC_CATCH_SIGNALS;
 
+    // skl 30.06.2008
+    // additional workaround for bugs 19899, 19908 and 19910 from Mantis
+    gp_Pnt P1s, P2s;
+    double dist = GEOMUtils::GetMinDistanceSingular(aShape1, aShape2, P1s, P2s);
+    bool singularBetter = dist >= 0;
+
     BRepExtrema_DistShapeShape dst (aShape1, aShape2);
     if (dst.IsDone()) {
       nbSolutions = dst.NbSolution();
@@ -2442,15 +2334,32 @@ Standard_Integer GEOMImpl_IMeasureOperations::ClosestPoints (Handle(GEOM_Object)
       for (int i = 1; i <= nbSolutions; i++) {
         P1 = dst.PointOnShape1(i);
         P2 = dst.PointOnShape2(i);
-
+        
         theDoubles->Append(P1.X());
         theDoubles->Append(P1.Y());
         theDoubles->Append(P1.Z());
         theDoubles->Append(P2.X());
         theDoubles->Append(P2.Y());
         theDoubles->Append(P2.Z());
+        
+        Standard_Real Dist = P1.Distance(P2);
+        singularBetter = singularBetter && dist < Dist;
       }
     }
+
+    if (singularBetter) {
+      if (theDoubles.IsNull()) theDoubles = new TColStd_HSequenceOfReal;
+      else theDoubles->Clear();
+
+      nbSolutions = 1;
+    
+      theDoubles->Append(P1s.X());
+      theDoubles->Append(P1s.Y());
+      theDoubles->Append(P1s.Z());
+      theDoubles->Append(P2s.X());
+      theDoubles->Append(P2s.Y());
+      theDoubles->Append(P2s.Z());
+    }
   }
   catch (Standard_Failure& aFail) {
     SetErrorCode(aFail.GetMessageString());
@@ -3616,6 +3525,161 @@ double GEOMImpl_IMeasureOperations::ComputeTolerance(Handle(GEOM_Object) theEdge
   return aMaxDist;
 }
 
+//=======================================================================
+//function : FillErrorsSub
+//purpose  : Fill the errors list of subshapes on shape.
+//=======================================================================
+void GEOMImpl_IMeasureOperations::FillErrorsSub
+           (const BRepCheck_Analyzer                   &theAna,
+            const TopoDS_Shape                         &theShape,
+            const TopAbs_ShapeEnum                     theSubType,
+                  TopTools_DataMapOfIntegerListOfShape &theMapErrors) const
+{
+  TopExp_Explorer anExp(theShape, theSubType);
+  TopTools_MapOfShape aMapSubShapes;
+
+  for (; anExp.More(); anExp.Next()) {
+    const TopoDS_Shape &aSubShape = anExp.Current();
+
+    if (aMapSubShapes.Add(aSubShape)) {
+      const Handle(BRepCheck_Result) &aRes = theAna.Result(aSubShape);
+
+      for (aRes->InitContextIterator();
+           aRes->MoreShapeInContext(); 
+           aRes->NextShapeInContext()) {
+        if (aRes->ContextualShape().IsSame(theShape)) {
+          BRepCheck_ListIteratorOfListOfStatus itl(aRes->StatusOnShape());
+
+          if (itl.Value() != BRepCheck_NoError) {
+            // Add all errors for theShape and its sub-shape.
+            for (;itl.More(); itl.Next()) {
+              const Standard_Integer aStat = (Standard_Integer)itl.Value();
+
+              if (!theMapErrors.IsBound(aStat)) {
+                TopTools_ListOfShape anEmpty;
+
+                theMapErrors.Bind(aStat, anEmpty);
+              }
+
+              TopTools_ListOfShape &theShapes = theMapErrors.ChangeFind(aStat);
+
+              theShapes.Append(aSubShape);
+              theShapes.Append(theShape);
+            }
+          }
+        }
+
+        break;
+      }
+    }
+  }
+}
+
+//=======================================================================
+//function : FillErrors
+//purpose  : Fill the errors list.
+//=======================================================================
+void GEOMImpl_IMeasureOperations::FillErrors
+             (const BRepCheck_Analyzer                   &theAna,
+              const TopoDS_Shape                         &theShape,
+                    TopTools_DataMapOfIntegerListOfShape &theMapErrors,
+                    TopTools_MapOfShape                  &theMapShapes) const
+{
+  if (theMapShapes.Add(theShape)) {
+    // Fill errors of child shapes.
+    for (TopoDS_Iterator iter(theShape); iter.More(); iter.Next()) {
+      FillErrors(theAna, iter.Value(), theMapErrors, theMapShapes);
+    }
+
+    // Fill errors of theShape.
+    const Handle(BRepCheck_Result) &aRes = theAna.Result(theShape);
+
+    if (!aRes.IsNull()) {
+      BRepCheck_ListIteratorOfListOfStatus itl(aRes->Status());
+
+      if (itl.Value() != BRepCheck_NoError) {
+        // Add all errors for theShape.
+        for (;itl.More(); itl.Next()) {
+          const Standard_Integer aStat = (Standard_Integer)itl.Value();
+
+          if (!theMapErrors.IsBound(aStat)) {
+            TopTools_ListOfShape anEmpty;
+
+            theMapErrors.Bind(aStat, anEmpty);
+          }
+
+          theMapErrors.ChangeFind(aStat).Append(theShape);
+        }
+      }
+    }
+
+    // Add errors of subshapes on theShape.
+    const TopAbs_ShapeEnum aType = theShape.ShapeType();
+
+    switch (aType) {
+    case TopAbs_EDGE:
+      FillErrorsSub(theAna, theShape, TopAbs_VERTEX, theMapErrors);
+      break;
+    case TopAbs_FACE:
+      FillErrorsSub(theAna, theShape, TopAbs_WIRE, theMapErrors);
+      FillErrorsSub(theAna, theShape, TopAbs_EDGE, theMapErrors);
+      FillErrorsSub(theAna, theShape, TopAbs_VERTEX, theMapErrors);
+      break;
+    case TopAbs_SOLID:
+      FillErrorsSub(theAna, theShape, TopAbs_SHELL, theMapErrors);
+      break;
+    default:
+      break;
+    }
+  }
+}
+
+//=======================================================================
+//function : FillErrors
+//purpose  : Fill the errors list.
+//=======================================================================
+void GEOMImpl_IMeasureOperations::FillErrors
+                  (const BRepCheck_Analyzer    &theAna,
+                   const TopoDS_Shape          &theShape,
+                         std::list<ShapeError> &theErrors) const
+{
+  // Fill the errors map.
+  TopTools_DataMapOfIntegerListOfShape aMapErrors;
+  TopTools_MapOfShape                  aMapShapes;
+
+  FillErrors(theAna, theShape, aMapErrors, aMapShapes);
+
+  // Map sub-shapes and their indices
+  TopTools_IndexedMapOfShape anIndices;
+
+  TopExp::MapShapes(theShape, anIndices);
+
+  TopTools_DataMapIteratorOfDataMapOfIntegerListOfShape aMapIter(aMapErrors);
+
+  for (; aMapIter.More(); aMapIter.Next()) {
+    ShapeError anError;
+
+    anError.error = (BRepCheck_Status)aMapIter.Key();
+
+    TopTools_ListIteratorOfListOfShape aListIter(aMapIter.Value());
+    TopTools_MapOfShape                aMapUnique;
+
+    for (; aListIter.More(); aListIter.Next()) {
+      const TopoDS_Shape &aShape = aListIter.Value();
+
+      if (aMapUnique.Add(aShape)) {
+        const Standard_Integer anIndex = anIndices.FindIndex(aShape);
+
+        anError.incriminated.push_back(anIndex);
+      }
+    }
+
+    if (!anError.incriminated.empty()) {
+      theErrors.push_back(anError);
+    }
+  }
+}
+
 //=======================================================================
 //function : ShapeProximityCalculator
 //purpose  : returns an object to compute the proximity value

src/GEOMImpl/GEOMImpl_IMeasureOperations.hxx

@@ -25,8 +25,6 @@
 
 #include "GEOM_IOperations.hxx"
 
-#include <GeomAnaTool_Tools.hxx>
-
 #include <BRepCheck_Analyzer.hxx>
 #include <BRepCheck_Status.hxx>
 #include <TopoDS_Shape.hxx>
@@ -151,34 +149,30 @@ class GEOMImpl_IMeasureOperations : public GEOM_IOperations {
                                      Standard_Real& EdgeMin, Standard_Real& EdgeMax,
                                      Standard_Real& VertMin, Standard_Real& VertMax);
 
+  struct ShapeError {
+    BRepCheck_Status error;
+    std::list<int>   incriminated;
+  };
+
   Standard_EXPORT bool CheckShape (Handle(GEOM_Object)     theShape,
                                    const Standard_Boolean  theIsCheckGeom,
-                                   std::list<GeomAnaTool::ShapeError>  &theErrors);
+                                   std::list<ShapeError>  &theErrors);
 
   Standard_EXPORT TCollection_AsciiString PrintShapeErrors
                                   (Handle(GEOM_Object)          theShape,
-                                   const std::list<GeomAnaTool::ShapeError> &theErrors);
-
-  Standard_EXPORT bool ExtractBOPFailure
-                       (const Handle(TColStd_HSequenceOfTransient)& theShapes,
-                        const bool                                  theUseTimer,
-                        const bool                                  theTopoOnly,
-                        const bool                                  theRunParallel,
-                        const bool                                  theDoExact,
-                        Handle(GEOM_Object)&                        theResultShape,
-                        std::list<GeomAnaTool::ShapeError>&         theErrors);
+                                   const std::list<ShapeError> &theErrors);
 
   Standard_EXPORT bool CheckSelfIntersections (Handle(GEOM_Object) theShape,
                                                const SICheckLevel  theCheckLevel,
                                                Handle(TColStd_HSequenceOfInteger)& theIntersections);
-
+  
   Standard_EXPORT bool CheckSelfIntersectionsFast (Handle(GEOM_Object) theShape,
-                                                   float  deflection,
+                                                   float  deflection, 
                                                    double tolerance,
                                                    Handle(TColStd_HSequenceOfInteger)& theIntersections);
 
   Standard_EXPORT bool CheckBOPArguments (const Handle(GEOM_Object) &theShape);
-
+  
   Standard_EXPORT bool FastIntersect (Handle(GEOM_Object) theShape1, Handle(GEOM_Object) theShape2,
                                       double tolerance, float deflection,
                                       Handle(TColStd_HSequenceOfInteger)& theIntersections1,
@@ -277,6 +271,21 @@ class GEOMImpl_IMeasureOperations : public GEOM_IOperations {
 
  private:
 
+   void FillErrorsSub
+           (const BRepCheck_Analyzer                   &theAna,
+            const TopoDS_Shape                         &theShape,
+            const TopAbs_ShapeEnum                     theSubType,
+                  TopTools_DataMapOfIntegerListOfShape &theMapErrors) const;
+   void FillErrors
+             (const BRepCheck_Analyzer                   &theAna,
+              const TopoDS_Shape                         &theShape,
+                    TopTools_DataMapOfIntegerListOfShape &theMapErrors,
+                    TopTools_MapOfShape                  &theMapShapes) const;
+
+  void FillErrors (const BRepCheck_Analyzer &theAna,
+                   const TopoDS_Shape       &theShape,
+                   std::list<ShapeError>    &theErrors) const;
+
   Standard_Real getSurfaceCurvatures (const Handle(Geom_Surface)& aSurf,
                                       Standard_Real theUParam,
                                       Standard_Real theVParam,

src/GEOMImpl/GEOMImpl_ITransformOperations.cxx

@@ -1090,11 +1090,10 @@ GEOMImpl_ITransformOperations::OffsetShape (Handle(GEOM_Object) theObject,
  *  OffsetShapeCopy
  */
 //=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
-                    (Handle(GEOM_Object)                     theObject,
-                     double                                  theOffset,
-                     bool                                    theJoinByPipes,
-                     const Handle(TColStd_HArray1OfInteger)& theFacesIDs)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::OffsetShapeCopy( Handle(GEOM_Object) theObject,
+                                                double              theOffset,
+                                                bool                theJoinByPipes)
 {
   SetErrorCode(KO);
 
@@ -1119,10 +1118,6 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
   aTI.SetValue( theOffset );
   aTI.SetJoinByPipes( theJoinByPipes );
 
-  if (!theFacesIDs.IsNull()) {
-    aTI.SetFaceIDs(theFacesIDs);
-  }
-
   //Compute the offset
   try {
     OCC_CATCH_SIGNALS;
@@ -1137,31 +1132,18 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
   }
 
   //Make a Python command
-  if (theFacesIDs.IsNull()) {
-    if (theJoinByPipes)
-      GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffset("
-                                   << theObject << ", " << theOffset << ")";
-    else
-      GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffsetIntersectionJoin("
-                                   << theObject << ", " << theOffset << ")";
-  }
-  else {
-    GEOM::TPythonDump pd (aFunction);
-    pd << aCopy << " = geompy.MakeOffsetPartial("
-       << theObject << ", " << theOffset << ", [";
-
-    // Dump faces IDs.
-    for (Standard_Integer i = theFacesIDs->Lower(); i <= theFacesIDs->Upper(); ++i) {
-      pd << theFacesIDs->Value(i) << ((i == theFacesIDs->Upper()) ? "" : ", ");
-    }
-
-    pd << "])";
-  }
+  if (theJoinByPipes)
+    GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffset("
+                                 << theObject << ", " << theOffset << ")";
+  else
+    GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffsetIntersectionJoin("
+                                 << theObject << ", " << theOffset << ")";
 
   SetErrorCode(OK);
   return aCopy;
 }
 
+
 //=============================================================================
 /*!
  *  ProjectShapeCopy

src/GEOMImpl/GEOMImpl_ITransformOperations.hxx

@@ -108,11 +108,9 @@ class GEOMImpl_ITransformOperations : public GEOM_IOperations
                                                    double              theOffset,
                                                    bool                theJoinByPipes);
 
-  Standard_EXPORT Handle(GEOM_Object) OffsetShapeCopy
-                              (Handle(GEOM_Object) theObject,
-                               double              theOffset,
-                               bool                theJoinByPipes,
-                               const Handle(TColStd_HArray1OfInteger)& theFacesIDs = NULL);
+  Standard_EXPORT Handle(GEOM_Object) OffsetShapeCopy (Handle(GEOM_Object) theObject,
+                                                       double              theOffset,
+                                                       bool                theJoinByPipes);
 
   Standard_EXPORT Handle(GEOM_Object) ProjectShapeCopy (Handle(GEOM_Object) theSource,
                                                         Handle(GEOM_Object) theTarget);

src/GEOMImpl/GEOMImpl_OffsetDriver.cxx

@@ -28,13 +28,12 @@
 #include <GEOM_Function.hxx>
 #include <GEOMUtils.hxx>
 
-#include <BRepClass3d_SolidClassifier.hxx>
 #include <BRepOffsetAPI_MakeOffsetShape.hxx>
 #include <BRepOffsetAPI_MakeThickSolid.hxx>
+#include <TopoDS_Shape.hxx>
 #include <TopAbs.hxx>
 #include <TopExp.hxx>
-#include <TopoDS.hxx>
-#include <TopoDS_Shape.hxx>
+#include <BRepClass3d_SolidClassifier.hxx>
 #include <Precision.hxx>
 #include <Standard_ConstructionError.hxx>
 #include <StdFail_NotDone.hxx>
@@ -89,79 +88,24 @@ Standard_Integer GEOMImpl_OffsetDriver::Execute(Handle(TFunction_Logbook)& log)
 
   if ( aType == OFFSET_SHAPE || aType == OFFSET_SHAPE_COPY )
   {
+    BRepOffsetAPI_MakeOffsetShape MO;
     BRepOffset_Mode aMode = BRepOffset_Skin;
-    Standard_Boolean anIntersection = Standard_False;
-    Standard_Boolean aSelfInter = Standard_False;
+    Standard_Boolean anIntersection = Standard_False, aSelfInter = Standard_False;
+    MO.PerformByJoin( aShapeBase,
+                      aCI.GetValue(),
+                      aTol,
+                      aMode,
+                      anIntersection,
+                      aSelfInter,
+                      aCI.GetJoinByPipes() ? GeomAbs_Arc : GeomAbs_Intersection );
 
-    Handle(TColStd_HArray1OfInteger) aFacesIDs = aCI.GetFaceIDs();
-    if (aFacesIDs.IsNull() || aFacesIDs->Length() < 1) {
-      // Offset entire shape (all faces) with the same offset value
-      BRepOffsetAPI_MakeOffsetShape MO;
-      MO.PerformByJoin( aShapeBase,
-                        anOffset,
-                        aTol,
-                        aMode,
-                        anIntersection,
-                        aSelfInter,
-                        aCI.GetJoinByPipes() ? GeomAbs_Arc : GeomAbs_Intersection );
-
-      if ( MO.IsDone() ) {
-        aShape = MO.Shape();
-        if ( !GEOMUtils::CheckShape(aShape, true) && !GEOMUtils::FixShapeTolerance(aShape) )
-          Standard_ConstructionError::Raise("Offset aborted : non valid shape result");
-      }
-      else {
-        StdFail_NotDone::Raise("Offset construction failed");
-      }
+    if ( MO.IsDone() ) {
+      aShape = MO.Shape();
+      if ( !GEOMUtils::CheckShape(aShape, true) && !GEOMUtils::FixShapeTolerance(aShape) )
+        Standard_ConstructionError::Raise("Boolean operation aborted : non valid shape result");
     }
     else {
-      // Offset selected faces of main shape by given value, other faces by 0
-      BRepOffset_MakeOffset aMakeOffset;
-      aMakeOffset.Initialize(aShapeBase,
-                             anOffset, // set offset on all faces to anOffset
-                             aTol,
-                             aMode,
-                             anIntersection,
-                             aSelfInter,
-                             aCI.GetJoinByPipes() ? GeomAbs_Arc : GeomAbs_Intersection,
-                             Standard_False);
-
-      // put selected faces into a map
-      TopTools_MapOfShape aMapFaces;
-      TopTools_IndexedMapOfShape anIndices;
-      TopExp::MapShapes(aShapeBase, anIndices);
-      Standard_Integer aNbShapes = anIndices.Extent();
-      for (Standard_Integer i = aFacesIDs->Lower(); i <= aFacesIDs->Upper(); ++i) {
-        const Standard_Integer anIndex = aFacesIDs->Value(i);
-        if (anIndex < 1 || anIndex > aNbShapes) {
-          Standard_ConstructionError::Raise("Offset aborted : Invalid face index given");
-        }
-        const TopoDS_Shape &aFace = anIndices.FindKey(anIndex);
-        if (aFace.ShapeType() != TopAbs_FACE) {
-          Standard_ConstructionError::Raise("Offset aborted : Shape by index is not a face");
-        }
-        aMapFaces.Add(aFace);
-      }
-
-      // set offset on non-selected faces to zero
-      TopExp_Explorer anExp (aShapeBase, TopAbs_FACE);
-      for (; anExp.More(); anExp.Next()) {
-        const TopoDS_Shape &aFace = anExp.Current();
-        if (!aMapFaces.Contains(aFace)) {
-          aMakeOffset.SetOffsetOnFace(TopoDS::Face(aFace), 0.0);
-        }
-      }
-
-      // perform offset operation
-      aMakeOffset.MakeOffsetShape();
-      if ( aMakeOffset.IsDone() ) {
-        aShape = aMakeOffset.Shape();
-        if ( !GEOMUtils::CheckShape(aShape, true) && !GEOMUtils::FixShapeTolerance(aShape) )
-          Standard_ConstructionError::Raise("Offset aborted : non valid shape result");
-      }
-      else {
-        StdFail_NotDone::Raise("Offset construction failed");
-      }
+      StdFail_NotDone::Raise("Offset construction failed");
     }
   }
   else if (aType == OFFSET_THICKENING || aType == OFFSET_THICKENING_COPY)
@@ -272,12 +216,6 @@ GetCreationInformation(std::string&             theOperationName,
     theOperationName = "OFFSET";
     AddParam( theParams, "Object", aCI.GetShape() );
     AddParam( theParams, "Offset", aCI.GetValue() );
-    {
-      Handle(TColStd_HArray1OfInteger) aFacesIDs = aCI.GetFaceIDs();
-      if (!aFacesIDs.IsNull()) {
-        AddParam(theParams, "Faces IDs", aFacesIDs);
-      }
-    }
     break;
   case OFFSET_THICKENING:
   case OFFSET_THICKENING_COPY:

src/GEOMImpl/GEOMImpl_PartitionDriver.cxx

@@ -564,9 +564,6 @@ GetCreationInformation(std::string&             theOperationName,
     AddParam( theParams, "Object", aCI.GetShape() );
     AddParam( theParams, "Plane", aCI.GetPlane() );
     break;
-  case PARTITION_GENERAL_FUSE:
-    AddParam( theParams, "Objects", aCI.GetShapes() );
-    break;
   default:
     return false;
   }

src/GEOMImpl/GEOMImpl_ShapeDriver.cxx

@@ -531,24 +531,10 @@ Standard_Integer GEOMImpl_ShapeDriver::Execute(Handle(TFunction_Logbook)& log) c
     Handle(TopTools_HSequenceOfShape) aSeqClosedWires = new TopTools_HSequenceOfShape;
     Handle(TopTools_HSequenceOfShape) aSeqOpenWires = new TopTools_HSequenceOfShape;
     for (ind = 1; ind <= aSeqWiresOut->Length(); ind++) {
-      TopoDS_Shape aWireShape = aSeqWiresOut->Value(ind);
-      if (aWireShape.Closed()) {
-        TopoDS_Wire aWire = TopoDS::Wire(aWireShape);
-        BRepTools_WireExplorer wexp (aWire);
-        if (wexp.More()) {
-          TopoDS_Edge anEdge = wexp.Current();
-          wexp.Next();
-          if (!wexp.More()) { // one edge in the wire
-            if (BRep_Tool::Degenerated(anEdge) || !BRep_Tool::IsGeometric(anEdge)) {
-              continue;
-            }
-          }
-        }
-        aSeqClosedWires->Append(aWireShape);
-      }
-      else {
-        aSeqOpenWires->Append(aWireShape);
-      }
+      if (aSeqWiresOut->Value(ind).Closed())
+        aSeqClosedWires->Append(aSeqWiresOut->Value(ind));
+      else
+        aSeqOpenWires->Append(aSeqWiresOut->Value(ind));
     }
 
     if (aSeqClosedWires->Length() < 1) {

src/GEOMImpl/GEOMImpl_Types.hxx

@@ -268,7 +268,6 @@
 #define PARTITION_PARTITION 1
 #define PARTITION_HALF      2
 #define PARTITION_NO_SELF_INTERSECTIONS 3
-#define PARTITION_GENERAL_FUSE 4
 
 #define POLYLINE_POINTS       1
 #define POLYLINE2D_PLN_COORDS 2

src/GEOMToolsGUI/CMakeLists.txt

@@ -38,7 +38,6 @@ INCLUDE_DIRECTORIES(
   ${PROJECT_SOURCE_DIR}/src/Material
   ${PROJECT_SOURCE_DIR}/src/DependencyTree
   ${PROJECT_SOURCE_DIR}/src/GEOMUtils
-  ${PROJECT_SOURCE_DIR}/src/GEOM
   ${CMAKE_CURRENT_SOURCE_DIR}
   )
 

src/GEOMToolsGUI/GEOMToolsGUI_1.cxx

@@ -37,7 +37,6 @@
 #include "GEOMToolsGUI_MaterialPropertiesDlg.h"
 #include "GEOMToolsGUI_LineWidthDlg.h"
 #include "GEOMToolsGUI_ReduceStudyDlg.h"
-#include "GEOM_ColorUtils.hxx"
 #include <Material_Model.h>
 
 #include <GEOM_VTKPropertyMaterial.hxx>
@@ -187,7 +186,7 @@ void GEOMToolsGUI::OnAutoColor()
 #endif                    // GENERAL_AUTOCOLOR
 
 #ifdef SIMPLE_AUTOCOLOR   // simplified algorithm for auto-colors
-    SALOMEDS::Color aColor = GEOM_ColorUtils::getPredefinedUniqueColor();
+    SALOMEDS::Color aColor = GEOM_Displayer::getPredefinedUniqueColor();
 #else                     // old algorithm  for auto-colors
     SALOMEDS::Color aColor = GEOM_Displayer::getUniqueColor( aReservedColors );
     aReservedColors.append( aColor );

src/GEOMUtils/GEOMUtils.cxx

@@ -119,6 +119,112 @@
 
 namespace
 {
+  /**
+   * This function constructs and returns modified shape from the original one
+   * for singular cases. It is used for the method GetMinDistanceSingular.
+   *
+   * \param theShape the original shape
+   * \param theModifiedShape output parameter. The modified shape.
+   * \param theAddDist output parameter. The added distance for modified shape.
+   * \retval true if the shape is modified; false otherwise.
+   *
+   * \internal
+   */
+  Standard_Boolean ModifyShape(const TopoDS_Shape  &theShape,
+                               TopoDS_Shape  &theModifiedShape,
+                               Standard_Real &theAddDist)
+  {
+    TopExp_Explorer anExp;
+    int nbf = 0;
+
+    theAddDist = 0.;
+    theModifiedShape.Nullify();
+
+    for ( anExp.Init( theShape, TopAbs_FACE ); anExp.More(); anExp.Next() ) {
+      nbf++;
+      theModifiedShape = anExp.Current();
+    }
+    if(nbf==1) {
+      TopoDS_Shape sh = theShape;
+      while(sh.ShapeType()==TopAbs_COMPOUND) {
+        TopoDS_Iterator it(sh);
+        sh = it.Value();
+      }
+      Handle(Geom_Surface) S = BRep_Tool::Surface(TopoDS::Face(theModifiedShape));
+      if( S->IsKind(STANDARD_TYPE(Geom_SphericalSurface)) ||
+          S->IsKind(STANDARD_TYPE(Geom_ToroidalSurface)) ||
+          S->IsUPeriodic()) {
+        const Standard_Boolean isShell =
+          (sh.ShapeType()==TopAbs_SHELL || sh.ShapeType()==TopAbs_FACE);
+
+        if ( !isShell && S->IsKind(STANDARD_TYPE(Geom_SphericalSurface)) ) {
+          Handle(Geom_SphericalSurface) SS = Handle(Geom_SphericalSurface)::DownCast(S);
+          gp_Pnt PC = SS->Location();
+          BRep_Builder B;
+          TopoDS_Vertex V;
+          B.MakeVertex(V,PC,1.e-7);
+          theModifiedShape = V;
+          theAddDist = SS->Radius();
+          return Standard_True;
+        }
+        if ( !isShell && S->IsKind(STANDARD_TYPE(Geom_ToroidalSurface)) ) {
+          Handle(Geom_ToroidalSurface) TS = Handle(Geom_ToroidalSurface)::DownCast(S);
+          gp_Ax3 ax3 = TS->Position();
+          Handle(Geom_Circle) C = new Geom_Circle(ax3.Ax2(),TS->MajorRadius());
+          BRep_Builder B;
+          TopoDS_Edge E;
+          B.MakeEdge(E,C,1.e-7);
+          theModifiedShape = E;
+          theAddDist = TS->MinorRadius();
+          return Standard_True;
+        }
+
+        // non solid case or any periodic surface (Mantis 22454).
+        double U1,U2,V1,V2;
+        BRepTools::UVBounds(TopoDS::Face(theModifiedShape),U1,U2,V1,V2);
+        // end of changes for 020677 (dmv)
+        Handle(Geom_RectangularTrimmedSurface) TrS1 =
+          new Geom_RectangularTrimmedSurface(S,U1,(U1+U2)/2.,V1,V2);
+        Handle(Geom_RectangularTrimmedSurface) TrS2 =
+          new Geom_RectangularTrimmedSurface(S,(U1+U2)/2.,U2,V1,V2);
+        TopoDS_Shape aMShape;
+        
+        TopoDS_Face F1 = BRepBuilderAPI_MakeFace(TrS1, Precision::Confusion());
+        TopoDS_Face F2 = BRepBuilderAPI_MakeFace(TrS2, Precision::Confusion());
+        
+        if (isShell) {
+          BRep_Builder B;
+          B.MakeCompound(TopoDS::Compound(aMShape));
+          B.Add(aMShape, F1);
+          B.Add(aMShape, F2);
+        } else {
+          // The original shape is a solid.
+          BRepBuilderAPI_Sewing aSewing (Precision::Confusion()*10.0);
+          aSewing.Add(F1);
+          aSewing.Add(F2);
+          aSewing.Perform();
+          aMShape = aSewing.SewedShape();
+          BRep_Builder B;
+          TopoDS_Solid aSolid;
+          B.MakeSolid(aSolid);
+          B.Add(aSolid, aMShape);
+          aMShape = aSolid;
+        }
+        
+        Handle(ShapeFix_Shape) sfs = new ShapeFix_Shape;
+        sfs->Init(aMShape);
+        sfs->SetPrecision(1.e-6);
+        sfs->SetMaxTolerance(1.0);
+        sfs->Perform();
+        theModifiedShape = sfs->Shape();
+        return Standard_True;
+      }
+    }
+    
+    theModifiedShape = theShape;
+    return Standard_False;
+  }
+
   void parseWard( const GEOMUtils::LevelsList &theLevelList, std::string &treeStr )
   {
     treeStr.append( "{" );
@@ -730,6 +836,75 @@ Standard_Boolean GEOMUtils::PreciseBoundingBox
   return Standard_True;
 }
 
+//=======================================================================
+//function : GetMinDistanceSingular
+//purpose  : 
+//=======================================================================
+double GEOMUtils::GetMinDistanceSingular(const TopoDS_Shape& aSh1,
+                                         const TopoDS_Shape& aSh2,
+                                         gp_Pnt& Ptmp1, gp_Pnt& Ptmp2)
+{
+  TopoDS_Shape     tmpSh1;
+  TopoDS_Shape     tmpSh2;
+  Standard_Real    AddDist1 = 0.;
+  Standard_Real    AddDist2 = 0.;
+  Standard_Boolean IsChange1 = ModifyShape(aSh1, tmpSh1, AddDist1);
+  Standard_Boolean IsChange2 = ModifyShape(aSh2, tmpSh2, AddDist2);
+
+  if( !IsChange1 && !IsChange2 )
+    return -2.0;
+
+  BRepExtrema_DistShapeShape dst(tmpSh1,tmpSh2);
+  if (dst.IsDone()) {
+    double MinDist = 1.e9;
+    gp_Pnt PMin1, PMin2, P1, P2;
+    for (int i = 1; i <= dst.NbSolution(); i++) {
+      P1 = dst.PointOnShape1(i);
+      P2 = dst.PointOnShape2(i);
+      Standard_Real Dist = P1.Distance(P2);
+      if (MinDist > Dist) {
+        MinDist = Dist;
+        PMin1 = P1;
+        PMin2 = P2;
+      }
+    }
+    if(MinDist<1.e-7) {
+      Ptmp1 = PMin1;
+      Ptmp2 = PMin2;
+    }
+    else {
+      gp_Dir aDir(gp_Vec(PMin1,PMin2));
+      if( MinDist > (AddDist1+AddDist2) ) {
+        Ptmp1 = gp_Pnt( PMin1.X() + aDir.X()*AddDist1,
+                        PMin1.Y() + aDir.Y()*AddDist1,
+                        PMin1.Z() + aDir.Z()*AddDist1 );
+        Ptmp2 = gp_Pnt( PMin2.X() - aDir.X()*AddDist2,
+                        PMin2.Y() - aDir.Y()*AddDist2,
+                        PMin2.Z() - aDir.Z()*AddDist2 );
+        return (MinDist - AddDist1 - AddDist2);
+      }
+      else {
+        if( AddDist1 > 0 ) {
+          Ptmp1 = gp_Pnt( PMin1.X() + aDir.X()*AddDist1,
+                          PMin1.Y() + aDir.Y()*AddDist1,
+                          PMin1.Z() + aDir.Z()*AddDist1 );
+          Ptmp2 = Ptmp1;
+        }
+        else {
+          Ptmp2 = gp_Pnt( PMin2.X() - aDir.X()*AddDist2,
+                          PMin2.Y() - aDir.Y()*AddDist2,
+                          PMin2.Z() - aDir.Z()*AddDist2 );
+          Ptmp1 = Ptmp2;
+        }
+      }
+    }
+    double res = MinDist - AddDist1 - AddDist2;
+    if(res<0.) res = 0.0;
+    return res;
+  }
+  return -2.0;
+}
+
 //=======================================================================
 //function : GetMinDistance
 //purpose  : 
@@ -739,7 +914,46 @@ Standard_Real GEOMUtils::GetMinDistance
                                 const TopoDS_Shape& theShape2,
                                 gp_Pnt& thePnt1, gp_Pnt& thePnt2)
 {
-  Standard_Real aResult = -1.0;
+  Standard_Real aResult = 1.e9;
+
+  // Issue 0020231: A min distance bug with torus and vertex.
+  // Make GetMinDistance() return zero if a sole VERTEX is inside any of SOLIDs
+
+  // which of shapes consists of only one vertex?
+  TopExp_Explorer exp1(theShape1,TopAbs_VERTEX), exp2(theShape2,TopAbs_VERTEX);
+  TopoDS_Shape V1 = exp1.More() ? exp1.Current() : TopoDS_Shape();
+  TopoDS_Shape V2 = exp2.More() ? exp2.Current() : TopoDS_Shape();
+  exp1.Next(); exp2.Next();
+  if ( exp1.More() ) V1.Nullify();
+  if ( exp2.More() ) V2.Nullify();
+  // vertex and container of solids
+  TopoDS_Shape V = V1.IsNull() ? V2 : V1;
+  TopoDS_Shape S = V1.IsNull() ? theShape1 : theShape2;
+  if ( !V.IsNull() ) {
+    // classify vertex against solids
+    gp_Pnt p = BRep_Tool::Pnt( TopoDS::Vertex( V ) );
+    for ( exp1.Init( S, TopAbs_SOLID ); exp1.More(); exp1.Next() ) {
+      BRepClass3d_SolidClassifier classifier( exp1.Current(), p, 1e-6);
+      if ( classifier.State() == TopAbs_IN ) {
+        thePnt1 = p;
+        thePnt2 = p;
+        return 0.0;
+      }
+    }
+  }
+  // End Issue 0020231
+
+  // skl 30.06.2008
+  // additional workaround for bugs 19899, 19908 and 19910 from Mantis
+#if OCC_VERSION_LARGE < 0x07070000
+  aResult = GEOMUtils::GetMinDistanceSingular(theShape1, theShape2, thePnt1, thePnt2);
+#endif
+
+  /*
+  if (dist > -1.0) {
+    return dist;
+  }
+  */
 
   BRepExtrema_DistShapeShape dst (theShape1, theShape2);
   if (dst.IsDone()) {
@@ -750,7 +964,7 @@ Standard_Real GEOMUtils::GetMinDistance
       P2 = dst.PointOnShape2(i);
 
       Standard_Real Dist = P1.Distance(P2);
-      if (aResult < 0 || Dist < aResult ) {
+      if (aResult < 0 || aResult > Dist) {
         aResult = Dist;
         thePnt1 = P1;
         thePnt2 = P2;

src/GEOMUtils/GEOMUtils.hxx

@@ -181,6 +181,20 @@ namespace GEOMUtils
    */
   Standard_EXPORT Standard_Boolean PreciseBoundingBox(const TopoDS_Shape &theShape, Bnd_Box &theBox);
 
+  /*!
+   * \brief Computes minumal distance between two shapes for singular cases
+   *        (workaround for bugs 19899, 19908 and 19910 from Mantis).
+   *
+   * \param aSh1 the first shape
+   * \param aSh2 the second shape
+   * \param Ptmp1 the output result point on the first shape
+   * \param Ptmp2 the output result point on the second shape
+   * \retval negative value if it is not a singular case; actual distance for singular case.
+   */
+  Standard_EXPORT Standard_Real GetMinDistanceSingular(const TopoDS_Shape& aSh1,
+						       const TopoDS_Shape& aSh2,
+						       gp_Pnt& Ptmp1, gp_Pnt& Ptmp2);
+
   /*!
    * \brief Computes minumal distance between two shapes.
    *

src/GEOM_I/CMakeLists.txt

@@ -25,7 +25,6 @@ INCLUDE_DIRECTORIES(
   ${PTHREAD_INCLUDE_DIR}
   ${OpenCASCADE_INCLUDE_DIR}
   ${KERNEL_INCLUDE_DIRS}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${PROJECT_SOURCE_DIR}/src/GEOMImpl
   ${PROJECT_SOURCE_DIR}/src/GEOM
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo
@@ -48,7 +47,6 @@ ENDIF(WIN32)
 
 # libraries to link to
 SET(_link_LIBRARIES
-  ${CommonGeomLib_GeomAnaTool}
   GEOMImpl
   GEOMUtils
   SalomeIDLGEOM

src/GEOM_I/GEOM_IMeasureOperations_i.cc

@@ -22,7 +22,6 @@
 
 #include <Standard_Stream.hxx>
 #include <TColStd_HArray1OfReal.hxx>
-#include <TColStd_HSequenceOfTransient.hxx>
 
 #include "GEOM_IMeasureOperations_i.hh"
 
@@ -43,7 +42,7 @@
  */
 static void ConvertShapeError
     (const GEOM::GEOM_IMeasureOperations::ShapeErrors         &theErrorsFrom,
-           std::list<GeomAnaTool::ShapeError> &theErrorsTo)
+           std::list<GEOMImpl_IMeasureOperations::ShapeError> &theErrorsTo)
 {
   int aNbErr = theErrorsFrom.length();
   int i = 0;
@@ -52,7 +51,7 @@ static void ConvertShapeError
     const GEOM::GEOM_IMeasureOperations::ShapeError anErr = theErrorsFrom[i];
     const GEOM::GEOM_IMeasureOperations::ShapeErrorType aType = anErr.error;
     const GEOM::ListOfLong anIncrims = anErr.incriminated;
-    GeomAnaTool::ShapeError anErrStruct;
+    GEOMImpl_IMeasureOperations::ShapeError anErrStruct;
 
     switch (aType) {
     case GEOM::GEOM_IMeasureOperations::InvalidPointOnCurve:
@@ -177,7 +176,7 @@ static void ConvertShapeError
  * \param theErrorsTo result errors.
  */
 static void ConvertShapeError
-    (const std::list<GeomAnaTool::ShapeError> &theErrorsFrom,
+    (const std::list<GEOMImpl_IMeasureOperations::ShapeError> &theErrorsFrom,
            GEOM::GEOM_IMeasureOperations::ShapeErrors_out     &theErrorsTo)
 {
   const int aNbErr = theErrorsFrom.size();
@@ -187,7 +186,7 @@ static void ConvertShapeError
   anErrArray->length(aNbErr);
 
   // fill the local CORBA array with values from lists
-  std::list<GeomAnaTool::ShapeError>::const_iterator
+  std::list<GEOMImpl_IMeasureOperations::ShapeError>::const_iterator
     anIt = theErrorsFrom.begin();
   int i = 0;
 
@@ -645,7 +644,7 @@ CORBA::Boolean GEOM_IMeasureOperations_i::CheckShape
     return 0;
   }
 
-  std::list<GeomAnaTool::ShapeError> anErrList;
+  std::list<GEOMImpl_IMeasureOperations::ShapeError> anErrList;
   bool isOk = GetOperations()->CheckShape(aShape, false, anErrList);
 
   ConvertShapeError(anErrList, theErrors);
@@ -673,7 +672,7 @@ CORBA::Boolean GEOM_IMeasureOperations_i::CheckShapeWithGeometry
     return 0;
   }
 
-  std::list<GeomAnaTool::ShapeError> anErrList;
+  std::list<GEOMImpl_IMeasureOperations::ShapeError> anErrList;
   bool isOk = GetOperations()->CheckShape(aShape, true, anErrList);
 
   ConvertShapeError(anErrList, theErrors);
@@ -700,7 +699,7 @@ char* GEOM_IMeasureOperations_i::PrintShapeErrors
   }
 
   // Convert the errors sequence
-  std::list<GeomAnaTool::ShapeError> anErrList;
+  std::list<GEOMImpl_IMeasureOperations::ShapeError> anErrList;
 
   ConvertShapeError(theErrors, anErrList);
 
@@ -710,66 +709,6 @@ char* GEOM_IMeasureOperations_i::PrintShapeErrors
   return CORBA::string_dup(aDescr.ToCString());
 }
 
-//=============================================================================
-/*!
- *  ExtractBOPFailure
- */
-//=============================================================================
-CORBA::Boolean GEOM_IMeasureOperations_i::ExtractBOPFailure
-             (const GEOM::ListOfGO&                                theShapes,
-                    CORBA::Boolean                                 theUseTimer,
-                    CORBA::Boolean                                 theTopoOnly,
-                    CORBA::Boolean                                 theRunParallel,
-                    CORBA::Boolean                                 theDoExact,
-                    GEOM::GEOM_Object_out                          theResultShape,
-                    GEOM::GEOM_IMeasureOperations::ShapeErrors_out theErrors)
-{
-  GEOM::GEOM_Object_var aNullRes;
-  theResultShape = aNullRes._retn();
-
-  // Set the not done flag
-  theErrors = new GEOM::GEOM_IMeasureOperations::ShapeErrors;
-  GetOperations()->SetNotDone();
-
-  // Check for existing shapes
-  int aNbShapes = theShapes.length();
-  if (!aNbShapes)
-  {
-    return 0;
-  }
-
-  // Create the sequence of GEOM objects for the failure shapes
-  Handle(TColStd_HSequenceOfTransient) aSeqShapes = new TColStd_HSequenceOfTransient;
-  for (int i = 0; i < aNbShapes; i++)
-  {
-    Handle(::GEOM_Object) aShape = GetObjectImpl(theShapes[i]);
-    if (!aShape.IsNull())
-    {
-      aSeqShapes->Append(aShape);
-    }
-  }
-
-  if (!aSeqShapes->Length())
-  {
-    return 0;
-  }
-
-  // Perform partition operation and check for failures
-  Handle(::GEOM_Object) aResultShape;
-  std::list<GeomAnaTool::ShapeError> anErrList;
-  bool isOk = GetOperations()->ExtractBOPFailure
-    (aSeqShapes, theUseTimer, theTopoOnly, theRunParallel,
-     theDoExact, aResultShape, anErrList);
-
-  if (!aResultShape.IsNull()) {
-    theResultShape = GetObject(aResultShape);
-  }
-
-  ConvertShapeError(anErrList, theErrors);
-
-  return isOk;
-}
-
 //=============================================================================
 /*!
  *  CheckSelfIntersections
@@ -1427,8 +1366,8 @@ GEOM::GEOM_IMeasureOperations::SequenceOfPairOfShape* GEOM_IMeasureOperations_i:
   std::list<GEOMImpl_IMeasureOperations::CoupleOfObjects>::iterator anIter(aSelfInters.begin());
   for (Standard_Integer i = 0; i < aLength; i++, ++anIter)
   {
-    aSeq[i].first  = GetObject((*anIter).first);
-    aSeq[i].second = GetObject((*anIter).second);
+    aSeq[i].first = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).first));
+    aSeq[i].second = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).second));
   }
 
   return aSeq._retn();
@@ -1465,8 +1404,8 @@ GEOM::GEOM_IMeasureOperations::SequenceOfPairOfShape* GEOM_IMeasureOperations_i:
   std::list<GEOMImpl_IMeasureOperations::CoupleOfObjects>::iterator anIter(aSelfInterf.begin());
   for (Standard_Integer i = 0; i < aLength; i++, ++anIter)
   {
-    aSeq[i].first  = GetObject((*anIter).first);
-    aSeq[i].second = GetObject((*anIter).second);
+    aSeq[i].first = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).first));
+    aSeq[i].second = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).second));
   }
 
   return aSeq._retn();
@@ -1532,8 +1471,8 @@ GEOM::GEOM_IMeasureOperations::SequenceOfPairOfShape* GEOM_IMeasureOperations_i:
   std::list<GEOMImpl_IMeasureOperations::CoupleOfObjects>::iterator anIter(aDistantS.begin());
   for (Standard_Integer i = 0; i < aLength; i++, ++anIter)
   {
-    aSeq[i].first  = GetObject((*anIter).first);
-    aSeq[i].second = GetObject((*anIter).second);
+    aSeq[i].first = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).first));
+    aSeq[i].second = GetObject(Handle(::GEOM_Object)::DownCast((*anIter).second));
   }
 
   return aSeq._retn();
@@ -1563,8 +1502,8 @@ GEOM::GEOM_IMeasureOperations::CheckResults* GEOM_IMeasureOperations_i::CheckCon
   for (Standard_Integer i = 0; i < aLength; i++, ++anIntIt)
   {
     aRes[i].type = (*anIntIt).TypeOfCheck;
-    aRes[i].failedShapes.first  = GetObject((*anIntIt).FailedShapes.first);
-    aRes[i].failedShapes.second = GetObject((*anIntIt).FailedShapes.second);
+    aRes[i].failedShapes.first  = GetObject(Handle(::GEOM_Object)::DownCast((*anIntIt).FailedShapes.first));
+    aRes[i].failedShapes.second = GetObject(Handle(::GEOM_Object)::DownCast((*anIntIt).FailedShapes.second));
   }
 
   return aRes._retn();
@@ -1591,7 +1530,7 @@ CORBA::Double GEOM_IMeasureOperations_i::UpdateTolerance(GEOM::GEOM_Object_ptr t
 void GEOM_IMeasureOperations_i::ConvertToList(const GEOM::GEOM_IMeasureOperations::CheckResults& theResuts,
                                               std::list<GEOMImpl_IMeasureOperations::FailedChecks>& theListOfResults)
 {
-  for (size_t i = 0; i < theResuts.length(); ++i)
+  for (Standard_Integer i = 0; i < theResuts.length(); ++i)
   {
     GEOMImpl_IMeasureOperations::FailedChecks aCheck;
     aCheck.TypeOfCheck = theResuts[i].type;

src/GEOM_I/GEOM_IMeasureOperations_i.hh

@@ -98,15 +98,6 @@ class GEOM_I_EXPORT GEOM_IMeasureOperations_i :
              (      GEOM::GEOM_Object_ptr                       theShape,
               const GEOM::GEOM_IMeasureOperations::ShapeErrors &theErrors);
 
-  CORBA::Boolean ExtractBOPFailure
-             (const GEOM::ListOfGO&                                theShapes,
-                    CORBA::Boolean                                 theUseTimer,
-                    CORBA::Boolean                                 theTopoOnly,
-                    CORBA::Boolean                                 theRunParallel,
-                    CORBA::Boolean                                 theDoExact,
-                    GEOM::GEOM_Object_out                          theResultShape,
-                    GEOM::GEOM_IMeasureOperations::ShapeErrors_out theErrors);
-
   CORBA::Boolean CheckSelfIntersections (GEOM::GEOM_Object_ptr theShape,
                                          CORBA::Long           theCheckLevel,
                                          GEOM::ListOfLong_out  theIntersections);

src/GEOM_I/GEOM_ITransformOperations_i.cc

@@ -668,47 +668,6 @@ GEOM_ITransformOperations_i::OffsetShapeCopy (GEOM::GEOM_Object_ptr theObject,
   return GetObject(anObject);
 }
 
-//=============================================================================
-/*!
- *  OffsetShapePartialCopy
- */
-//=============================================================================
-GEOM::GEOM_Object_ptr
-GEOM_ITransformOperations_i::OffsetShapePartialCopy (GEOM::GEOM_Object_ptr   theObject,
-                                                     CORBA::Double           theOffset,
-                                                     const GEOM::ListOfLong& theFacesIDs)
-{
-  GEOM::GEOM_Object_var aGEOMObject;
-
-  //Set a not done flag
-  GetOperations()->SetNotDone();
-
-  //Get the basic object
-  Handle(::GEOM_Object) aBasicObject = GetObjectImpl(theObject);
-  if (aBasicObject.IsNull()) return aGEOMObject._retn();
-
-  // Get faces IDs.
-  Handle(TColStd_HArray1OfInteger) aFaceIDs;
-  Standard_Integer                 aNbIDs = theFacesIDs.length();
-  if (aNbIDs > 0) {
-    aFaceIDs = new TColStd_HArray1OfInteger (1, aNbIDs);
-    for (Standard_Integer i = 0; i < aNbIDs; i++) {
-      aFaceIDs->SetValue(i + 1, theFacesIDs[i]);
-    }
-  }
-
-  // join by pipes mode is not supported in combination with partial offset
-  bool aJoinByPipes = false;
-
-  //Create the offset shape
-  Handle(::GEOM_Object) anObject =
-    GetOperations()->OffsetShapeCopy(aBasicObject, theOffset, aJoinByPipes, aFaceIDs);
-  if (!GetOperations()->IsDone() || anObject.IsNull())
-    return aGEOMObject._retn();
-
-  return GetObject(anObject);
-}
-
 //=============================================================================
 /*!
  *  ProjectShapeCopy

src/GEOM_I/GEOM_ITransformOperations_i.hh

@@ -142,10 +142,6 @@ class GEOM_I_EXPORT GEOM_ITransformOperations_i :
                                          CORBA::Double         theOffset,
                                          CORBA::Boolean        theJoinByPipes);
 
-  GEOM::GEOM_Object_ptr OffsetShapePartialCopy (GEOM::GEOM_Object_ptr   theObject,
-                                                CORBA::Double           theOffset,
-                                                const GEOM::ListOfLong& theFacesIDs);
-
   GEOM::GEOM_Object_ptr ProjectShapeCopy (GEOM::GEOM_Object_ptr theSource,
                                           GEOM::GEOM_Object_ptr theTarget);
 

src/GEOM_SWIG/geomBuilder.py

@@ -3113,7 +3113,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             anObj.SetParameters(Parameters)
             self._autoPublish(anObj, theName, "cylinder")
             return anObj
-
+            
         ## Create a portion of cylinder with given base point, axis, radius, height and angle.
         #  @param thePnt Central point of cylinder base.
         #  @param theAxis Cylinder axis.
@@ -3196,7 +3196,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             anObj.SetParameters(Parameters)
             self._autoPublish(anObj, theName, "cylinder")
             return anObj
-
+            
         ## Create a portion of cylinder with given radius, height and angle at
         #  the origin of coordinate system. Axis of the cylinder
         #  will be collinear to the OZ axis of the coordinate system.
@@ -3999,7 +3999,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
         #
-        #  @return New GEOM.GEOM_Object, containing the created pipe if
+        #  @return New GEOM.GEOM_Object, containing the created pipe if 
         #          \a IsGenerateGroups is not set. Otherwise it returns a
         #          list of GEOM.GEOM_Object. Its first element is the created pipe, the
         #          remaining ones are created groups.
@@ -4039,7 +4039,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                         publication is switched on, default value is used for result name.
 
             Returns:
-                New GEOM.GEOM_Object, containing the created pipe if
+                New GEOM.GEOM_Object, containing the created pipe if 
                 IsGenerateGroups is not set. Otherwise it returns a
                 list of GEOM.GEOM_Object. Its first element is the created pipe, the
                 remaining ones are created groups.
@@ -4076,7 +4076,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
         #
-        #  @return New GEOM.GEOM_Object, containing the created pipe if
+        #  @return New GEOM.GEOM_Object, containing the created pipe if 
         #          \a IsGenerateGroups is not set. Otherwise it returns new
         #          GEOM.ListOfGO. Its first element is the created pipe, the
         #          remaining ones are created groups.
@@ -4112,7 +4112,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                         publication is switched on, default value is used for result name.
 
             Returns:
-                New GEOM.GEOM_Object, containing the created pipe if
+                New GEOM.GEOM_Object, containing the created pipe if 
                 IsGenerateGroups is not set. Otherwise it returns new
                 GEOM.ListOfGO. Its first element is the created pipe, the
                 remaining ones are created groups.
@@ -4197,7 +4197,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
         #
-        #  @return New GEOM.GEOM_Object, containing the created solids if
+        #  @return New GEOM.GEOM_Object, containing the created solids if 
         #          \a IsGenerateGroups is not set. Otherwise it returns new
         #          GEOM.ListOfGO. Its first element is the created solids, the
         #          remaining ones are created groups.
@@ -4242,7 +4242,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                         publication is switched on, default value is used for result name.
 
             Returns:
-                New GEOM.GEOM_Object, containing the created solids if
+                New GEOM.GEOM_Object, containing the created solids if 
                 IsGenerateGroups is not set. Otherwise it returns new
                 GEOM.ListOfGO. Its first element is the created solids, the
                 remaining ones are created groups.
@@ -4320,7 +4320,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
         #
-        #  @return New GEOM.GEOM_Object, containing the created solids if
+        #  @return New GEOM.GEOM_Object, containing the created solids if 
         #          \a IsGenerateGroups is not set. Otherwise it returns new
         #          GEOM.ListOfGO. Its first element is the created solids, the
         #          remaining ones are created groups.
@@ -4345,7 +4345,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                         publication is switched on, default value is used for result name.
 
             Returns:
-                New GEOM.GEOM_Object, containing the created solids if
+                New GEOM.GEOM_Object, containing the created solids if 
                 IsGenerateGroups is not set. Otherwise it returns new
                 GEOM.ListOfGO. Its first element is the created solids, the
                 remaining ones are created groups.
@@ -4378,7 +4378,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
         #
-        #  @return New GEOM.GEOM_Object, containing the created pipe if
+        #  @return New GEOM.GEOM_Object, containing the created pipe if 
         #          \a IsGenerateGroups is not set. Otherwise it returns new
         #          GEOM.ListOfGO. Its first element is the created pipe, the
         #          remaining ones are created groups.
@@ -4408,7 +4408,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                         publication is switched on, default value is used for result name.
 
             Returns:
-                New GEOM.GEOM_Object, containing the created pipe if
+                New GEOM.GEOM_Object, containing the created pipe if 
                 IsGenerateGroups is not set. Otherwise it returns new
                 GEOM.ListOfGO. Its first element is the created pipe, the
                 remaining ones are created groups.
@@ -4433,7 +4433,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #  @param theThickness Thickness of the resulting solid
         #  @param theFacesIDs the list of face IDs to be removed from the
         #         result. It is ignored if \a theShape is a face or a shell.
-        #         It is empty by default.
+        #         It is empty by default. 
         #  @param theInside If true the thickness is applied towards inside
         #  @param theName Object name; when specified, this parameter is used
         #         for result publication in the study. Otherwise, if automatic
@@ -4456,7 +4456,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                  theThickness Thickness of the resulting solid
                  theFacesIDs the list of face IDs to be removed from the
                           result. It is ignored if theShape is a face or a
-                          shell. It is empty by default.
+                          shell. It is empty by default. 
                  theInside If true the thickness is applied towards inside
                  theName Object name; when specified, this parameter is used
                          for result publication in the study. Otherwise, if automatic
@@ -4483,7 +4483,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #  @param theThickness Thickness of the resulting solid
         #  @param theFacesIDs the list of face IDs to be removed from the
         #         result. It is ignored if \a theShape is a face or a shell.
-        #         It is empty by default.
+        #         It is empty by default. 
         #  @param theInside If true the thickness is applied towards inside
         #
         #  @return The modified shape
@@ -4503,7 +4503,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
                 theThickness Thickness of the resulting solid
                 theFacesIDs the list of face IDs to be removed from the
                          result. It is ignored if \a theShape is a face or
-                         a shell. It is empty by default.
+                         a shell. It is empty by default. 
                 theInside If true the thickness is applied towards inside
 
             Returns:
@@ -4960,7 +4960,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             RaiseIfFailed("MakeFaceFromSurface", self.ShapesOp)
             self._autoPublish(anObj, theName, "face")
             return anObj
-
+        
         ## Create a non-planar face from a list of closed edges and a list of vertices.
         #  @param theEdges list of Edges(must be closed but not nesessarily belong to the same plane).
         #  @param theVertices list of vertices through which the result face must pass.
@@ -4993,7 +4993,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             RaiseIfFailed("MakeWrappedFace", self.ShapesOp)
             self._autoPublish(anObj, theName, "face")
             return anObj
-
+          
         ## Create a face from a set of edges with the given constraints.
         #  @param theConstraints List of edges and constraint faces (as a sequence of a Edge + Face couples):
         #         - edges should form a closed wire;
@@ -5002,9 +5002,9 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
         #  @param theName Object name; when specified, this parameter is used
         #         for result publication in the study. Otherwise, if automatic
         #         publication is switched on, default value is used for result name.
-        #
+        # 
         # @return New GEOM.GEOM_Object, containing the created face.
-        #
+        # 
         # @ref tui_creation_face "Example"
         @ManageTransactions("ShapesOp")
         def MakeFaceWithConstraints(self, theConstraints, theName=None):
@@ -5123,7 +5123,7 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             RaiseIfFailed("MakeCompound", self.ShapesOp)
             self._autoPublish(anObj, theName, "compound")
             return anObj
-
+        
         ## Create a solid (or solids) from the set of faces and/or shells.
         #  @param theFacesOrShells List of faces and/or shells.
         #  @param isIntersect If TRUE, forces performing intersections
@@ -9623,51 +9623,6 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             self._autoPublish(anObj, theName, "offset")
             return anObj
 
-        ## Create new object as partial offset of the given one.
-        #  Only indexed faces are offset, others keep they original location.
-        #  Gap between adjacent offset surfaces is filled
-        #  by extending and intersecting them.
-        #  @param theObject The base object for the offset.
-        #  @param theOffset Offset value.
-        #  @param theFacesIDs The list of face IDs indicating faces to be offset.
-        #  @param theName Object name; when specified, this parameter is used
-        #         for result publication in the study. Otherwise, if automatic
-        #         publication is switched on, default value is used for result name.
-        #
-        #  @return New GEOM.GEOM_Object, containing the offset object.
-        #
-        #  @ref tui_offset "Example"
-        @ManageTransactions("TrsfOp")
-        def MakeOffsetPartial(self, theObject, theOffset, theFacesIDs, theName=None):
-            """
-            Create new object as partial offset of the given one.
-            Only indexed faces are offset, others keep they original location.
-            Gap between adjacent offset surfaces is filled
-            by extending and intersecting them.
-
-            Parameters:
-                theObject The base object for the offset.
-                theOffset Offset value.
-                theFacesIDs The list of face IDs indicating faces to be offset.
-                theName Object name; when specified, this parameter is used
-                        for result publication in the study. Otherwise, if automatic
-                        publication is switched on, default value is used for result name.
-
-            Returns:
-                New GEOM.GEOM_Object, containing the offset object.
-
-            Example of usage:
-                 box = geompy.MakeBox(20, 20, 20, 200, 200, 200)
-                 # create a new object from the box, offsetting its top and front faces
-                 offset = geompy.MakeOffsetPartial(box, 70., [13, 33])
-            """
-            theOffset, Parameters = ParseParameters(theOffset)
-            anObj = self.TrsfOp.OffsetShapePartialCopy(theObject, theOffset, theFacesIDs)
-            RaiseIfFailed("OffsetShapePartialCopy", self.TrsfOp)
-            anObj.SetParameters(Parameters)
-            self._autoPublish(anObj, theName, "offset")
-            return anObj
-
         ## Create new object as projection of the given one on another.
         #  @param theSource The source object for the projection. It can be a point, edge or wire.
         #         Edge and wire are acceptable if @a theTarget is a face.
@@ -11982,56 +11937,6 @@ class geomBuilder(GEOM._objref_GEOM_Gen):
             """
             return self.MeasuOp.CheckBOPArguments(theShape)
 
-
-        ## Performs general fuse BOP on the given list of shapes
-        #  and extracts CheckShape information from its invalid result.
-        #  @param theShapes List of shapes for the BOP.
-        #  @param theTimer If True, the execution time of the operation is measured.
-        #  @param theTopo If True, only the topological entities will be checked.
-        #  @param theParallel If True, the operation will be executed in parallel.
-        #  @param theExact If True, an exact check will be performed.
-        #  @param theVerbose If True, prints execution errors and resulting shape errors.
-        #  @param theName Object name; when specified, this parameter is used
-        #         for result publication in the study. Otherwise, if automatic
-        #         publication is switched on, default value is used for result name.
-        #  @return (isValid, shapeResult, listOfErrors), where
-        #          isValid - a boolean value (whether result shape is valid or not),
-        #          shapeResult - the result shape itself as GEOM::Object,
-        #          listOfErrors - the list of GEOM.GEOM_IMeasureOperations.ShapeError.
-        def ExtractBOPFailure(self, theShapes, theTimer=False, theTopo=False, theParallel=False, theExact=False, theVerbose=False, theName=None):
-            """
-            Performs general fuse BOP on the given list of shapes
-            and extracts CheckShape information from its invalid result.
-
-            Parameters:
-                theShapes List of shapes for the BOP.
-                theTimer If True, the time of the operation is measured.
-                theTopo If True, only the topological entities will be checked.
-                theParallel If True, the operation will be executed in parallel.
-                theExact If True, an exact check will be performed.
-                theVerbose If True, prints execution errors and resulting shape errors.
-                theName Object name; when specified, this parameter is used
-                        for result publication in the study. Otherwise, if automatic
-                        publication is switched on, default value is used for result name.
-
-            Returns:
-                (isValid, shapeResult, listOfErrors), where
-                  isValid - a boolean value (whether result shape is valid or not),
-                  shapeResult - the result shape itself as GEOM::Object,
-                  listOfErrors - the list of GEOM.GEOM_IMeasureOperations.ShapeError.
-            """
-            (IsValid, ShapeRes, ShapeErrors) = self.MeasuOp.ExtractBOPFailure(theShapes, theTimer, theTopo, theParallel, theExact)
-            if theVerbose:
-                if not self.MeasuOp.IsDone():
-                    print("== ExtractBOPFailure execution trace:")
-                    print(self.MeasuOp.GetErrorCode())
-                if not IsValid:
-                    print("== ExtractBOPFailure result errors:")
-                    self.PrintShapeErrors(ShapeRes, ShapeErrors)
-            if ShapeRes:
-                self._autoPublish(ShapeRes, theName, "InvalidBOPResult")
-            return (IsValid, ShapeRes, ShapeErrors)
-
         ## Detect intersections of the given shapes with algorithm based on mesh intersections.
         #  @param theShape1 First source object
         #  @param theShape2 Second source object

src/GEOM_SWIG_WITHIHM/libGEOM_Swig.cxx

@@ -31,7 +31,6 @@
 #include "GEOM_Swig_LocalSelector.h"
 #include "GEOMGUI_OCCSelector.h"
 #include "OCCViewer_ViewManager.h"
-#include "GEOMBase.h"
 
 #include <SUIT_Desktop.h>
 #include <SUIT_Session.h>
@@ -431,19 +430,6 @@ void GEOM_Swig::setNameMode( const char* theEntry, bool theOn, bool theUpdateVie
 */
 void GEOM_Swig::setColor( const char* theEntry, int theRed, int theGreen, int theBlue, bool theUpdateViewer )
 {
-  // Update geom object color
-  GEOM::GEOM_Object_var GeomObject = GEOMBase::GetObjectFromEntry(theEntry);
-  if (!CORBA::is_nil(GeomObject))
-  {
-    SALOMEDS::Color aSColor;
-    aSColor.R = theRed / 255.0;
-    aSColor.G = theGreen / 255.0;
-    aSColor.B = theBlue / 255.0;
-
-    GeomObject->SetColor(aSColor);
-  }
-
-  // Update a color property stored in LightApp_Study view manager map
   ProcessVoidEvent( new TSetPropertyEvent( theEntry, GEOM::propertyName( GEOM::Color ), 
                                            QColor( theRed, theGreen, theBlue ), theUpdateViewer ) );
 }

src/IGESPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/STEPPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/STLPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/TransformationGUI/TransformationGUI_OffsetDlg.cxx

@@ -35,9 +35,6 @@
 #include <SalomeApp_Application.h>
 #include <LightApp_SelectionMgr.h>
 
-#include <TopExp.hxx>
-#include <TopTools_IndexedMapOfShape.hxx>
-
 //=================================================================================
 // class    : TransformationGUI_OffsetDlg()
 // purpose  : Constructs a TransformationGUI_OffsetDlg which is a child of 'parent', with the
@@ -45,43 +42,31 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-TransformationGUI_OffsetDlg::TransformationGUI_OffsetDlg
-                             (GeometryGUI* theGeometryGUI, QWidget* parent,
-                              bool modal, Qt::WindowFlags fl)
-  : GEOMBase_Skeleton(theGeometryGUI, parent, modal, fl)
+TransformationGUI_OffsetDlg::TransformationGUI_OffsetDlg( GeometryGUI* theGeometryGUI, QWidget* parent,
+                                                          bool modal, Qt::WindowFlags fl )
+  : GEOMBase_Skeleton( theGeometryGUI, parent, modal, fl )
 {
-  SUIT_ResourceMgr* aResMgr = SUIT_Session::session()->resourceMgr();
-  QPixmap image0 (aResMgr->loadPixmap("GEOM", tr("ICON_SELECT")));
-  QPixmap image1 (aResMgr->loadPixmap("GEOM", tr("ICON_DLG_OFFSET")));
-  QPixmap image2 (aResMgr->loadPixmap("GEOM", tr("ICON_DLG_OFFSET_PARTIAL")));
+  QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_OFFSET" ) ) );
+  QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
 
-  setWindowTitle(tr("GEOM_OFFSET_TITLE"));
+  setWindowTitle( tr( "GEOM_OFFSET_TITLE" ) );
 
   /***************************************************************/
-  mainFrame()->GroupConstructors->setTitle(tr("GEOM_OFFSET"));
-  mainFrame()->RadioButton1->setIcon(image1);
-  mainFrame()->RadioButton2->setIcon(image2);
-  mainFrame()->RadioButton1->setToolTip(tr("TOOLTIP_OFFSET"));
-  mainFrame()->RadioButton2->setToolTip(tr("TOOLTIP_OFFSET_PARTIAL"));
-  mainFrame()->RadioButton3->setAttribute(Qt::WA_DeleteOnClose);
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_OFFSET" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
   mainFrame()->RadioButton3->close();
-  mainFrame()->RadioButton1->setChecked(true);
-
-  GroupPoints = new DlgRef_2Sel1Spin2Check( centralWidget() );
 
+  GroupPoints = new DlgRef_1Sel1Spin1Check( centralWidget() );
   GroupPoints->GroupBox1->setTitle( tr( "GEOM_ARGUMENTS" ) );
-
   GroupPoints->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
-  GroupPoints->TextLabel2->setText( tr( "GEOM_FACES" ) );
-  GroupPoints->TextLabel3->setText( tr( "GEOM_OFFSET" ) );
-
-  GroupPoints->PushButton1->setIcon( image0 );
-  GroupPoints->PushButton2->setIcon( image0 );
-
+  GroupPoints->TextLabel2->setText( tr( "GEOM_OFFSET" ) );
   GroupPoints->CheckButton1->setText( tr( "GEOM_JOIN_BY_PIPES" ) );
   GroupPoints->CheckButton1->setChecked( true );
-  GroupPoints->CheckButton2->setAttribute( Qt::WA_DeleteOnClose );
-  GroupPoints->CheckButton2->close();
+
+  GroupPoints->PushButton1->setIcon( image1 );
 
   QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
   layout->setMargin( 0 ); layout->setSpacing( 6 );
@@ -114,76 +99,33 @@ void TransformationGUI_OffsetDlg::Init()
   /* init variables */
   myEditCurrentArgument = GroupPoints->LineEdit1;
   GroupPoints->LineEdit1->setReadOnly( true );
-  GroupPoints->LineEdit2->setReadOnly( true );
 
   myObjects.clear();
-  myFaces.clear();
+
+  /* Get setting of step value from file configuration */
+  double step = 1;
 
   /* min, max, step and decimals for spin boxes & initial values */
-  double step = 1;
   initSpinBox( GroupPoints->SpinBox_DX, COORD_MIN, COORD_MAX, step, "length_precision" );
   GroupPoints->SpinBox_DX->setValue( 1e-05 );
 
   mainFrame()->GroupBoxPublish->show();
 
   /* signals and slots connections */
-  connect(buttonOk(),    SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply(), SIGNAL(clicked()), this, SLOT(ClickOnApply()));
-  connect(this,          SIGNAL(constructorsClicked(int)),
-          this,          SLOT(ConstructorsClicked(int)));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
 
-  connect(GroupPoints->PushButton1, SIGNAL(clicked()),
-          this,                     SLOT(SetEditCurrentArgument()));
-  connect(GroupPoints->PushButton2, SIGNAL(clicked()),
-          this,                     SLOT(SetEditCurrentArgument()));
+  connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+  connect( myGeomGUI->getApp()->selectionMgr(),
+           SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
-  connect(GroupPoints->SpinBox_DX,   SIGNAL(valueChanged(double)),
-          this,                      SLOT(ValueChangedInSpinBox()));
-  connect(GroupPoints->CheckButton1, SIGNAL(toggled(bool)),
-          this,                      SLOT(JoinModeChanged()));
+  connect( GroupPoints->SpinBox_DX,   SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox() ) );
+  connect( GroupPoints->CheckButton1, SIGNAL( toggled( bool ) ),        this, SLOT( JoinModeChanged() ) );
 
-  connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
-          this,                                SLOT(SelectionIntoArgument()));
+  initName( tr( "GEOM_OFFSET" ) );
 
-  initName(tr("GEOM_OFFSET"));
-
-  ConstructorsClicked(0);
-}
-
-//==============================================================================
-// function : ConstructorsClicked()
-// purpose  : Radio button management
-//==============================================================================
-void TransformationGUI_OffsetDlg::ConstructorsClicked (int constructorId)
-{
-  switch (constructorId) {
-  case 0:
-    // disable faces selection
-    GroupPoints->TextLabel2->hide();
-    GroupPoints->PushButton2->hide();
-    GroupPoints->LineEdit2->hide();
-
-    // enable joint type
-    GroupPoints->CheckButton1->show();
-    break;
-  case 1:
-    // enable faces selection
-    GroupPoints->TextLabel2->show();
-    GroupPoints->PushButton2->show();
-    GroupPoints->LineEdit2->show();
-
-    // disable joint type
-    GroupPoints->CheckButton1->hide();
-    break;
-  default:
-    break;
-  }
-
-  qApp->processEvents();
-  updateGeometry();
-  resize(minimumSizeHint());
-
-  GroupPoints->PushButton1->click();
+  globalSelection( GEOM_ALLSHAPES );
+  resize(100,100);
   SelectionIntoArgument();
 }
 
@@ -210,10 +152,6 @@ bool TransformationGUI_OffsetDlg::ClickOnApply()
     return false;
 
   initName();
-
-  // activate selection and connect selection manager
-  ConstructorsClicked(getConstructorId());
-
   return true;
 }
 
@@ -224,27 +162,13 @@ bool TransformationGUI_OffsetDlg::ClickOnApply()
 //=================================================================================
 void TransformationGUI_OffsetDlg::SelectionIntoArgument()
 {
-  myEditCurrentArgument->setText("");
-
-  if (myEditCurrentArgument == GroupPoints->LineEdit1) {
-    if (getConstructorId() == 0) {
-      myObjects = getSelected( TopAbs_SHAPE, -1 );
-      myEditCurrentArgument->setText(GEOMBase::GetName(myObjects));
-    }
-    else if (getConstructorId() == 1) {
-      myFaces.clear();
-      GroupPoints->LineEdit2->setText("");
-      myObjects = getSelected(TopAbs_SHAPE, 1); // only one object allowed
-      if (!myObjects.isEmpty()) {
-        myEditCurrentArgument->setText(GEOMBase::GetName(myObjects[0].get()));
-        GroupPoints->PushButton2->click();
-      }
-    }
+  myObjects = getSelected( TopAbs_SHAPE, -1 );
+  if ( !myObjects.isEmpty() ) {
+    QString aName = myObjects.count() > 1 ? QString( "%1_objects").arg( myObjects.count() ) : GEOMBase::GetName( myObjects[0].get() );
+    myEditCurrentArgument->setText( aName );
   }
-  else if (myEditCurrentArgument == GroupPoints->LineEdit2) {
-    myFaces.clear();
-    myFaces = getSelected(TopAbs_FACE, -1);
-    myEditCurrentArgument->setText(GEOMBase::GetName(myFaces));
+  else {
+    myEditCurrentArgument->setText("");
   }
 
   processPreview();
@@ -260,20 +184,11 @@ void TransformationGUI_OffsetDlg::SetEditCurrentArgument()
   QPushButton* send = (QPushButton*)sender();
 
   if ( send == GroupPoints->PushButton1 ) {
-    GroupPoints->PushButton2->setDown(false);
+    GroupPoints->PushButton1->setDown(true);
     myEditCurrentArgument = GroupPoints->LineEdit1;
-    globalSelection(GEOM_ALLSHAPES);
+    myEditCurrentArgument->setFocus();
+    SelectionIntoArgument();
   }
-  else if (send == GroupPoints->PushButton2) {
-    GroupPoints->PushButton1->setDown(false);
-    myEditCurrentArgument = GroupPoints->LineEdit2;
-    globalSelection(); // close local contexts, if any
-    if (myObjects.size() > 0)
-      localSelection(myObjects[0].get(), TopAbs_FACE);
-  }
-
-  myEditCurrentArgument->setFocus();
-  send->setDown(true);
 }
 
 
@@ -295,11 +210,11 @@ void TransformationGUI_OffsetDlg::enterEvent( QEvent* )
 void TransformationGUI_OffsetDlg::ActivateThisDialog()
 {
   GEOMBase_Skeleton::ActivateThisDialog();
-
   connect( myGeomGUI->getApp()->selectionMgr(),
            SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
-
-  ConstructorsClicked(getConstructorId());
+  globalSelection( GEOM_ALLSHAPES );
+  myEditCurrentArgument = GroupPoints->LineEdit1;
+  myEditCurrentArgument->setFocus();
 }
 
 
@@ -328,27 +243,14 @@ GEOM::GEOM_IOperations_ptr TransformationGUI_OffsetDlg::createOperation()
 //=================================================================================
 bool TransformationGUI_OffsetDlg::isValid( QString& msg )
 {
-  bool isOk = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) && !myObjects.isEmpty();
-
-  if (isOk) {
-    switch (getConstructorId()) {
-    case 0:
-      for ( int i = 0; i < myObjects.count() && isOk; i++ ) {
-        GEOM::shape_type aType = myObjects[i]->GetShapeType();
-        isOk = aType == GEOM::FACE || aType == GEOM::SHELL || aType == GEOM::SOLID;
-        if ( !isOk )
-          msg = tr( "ERROR_SHAPE_TYPE" );
-      }
-      break;
-    case 1:
-      isOk = myObjects.size() == 1 && !myFaces.isEmpty();
-      break;
-    default:
-      break;
-    }
+  bool ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) && !myObjects.isEmpty();
+  for ( int i = 0; i < myObjects.count() && ok; i++ ) {
+    GEOM::shape_type aType = myObjects[i]->GetShapeType();
+    ok = aType == GEOM::FACE || aType == GEOM::SHELL || aType == GEOM::SOLID;
+    if ( !ok )
+      msg = tr( "ERROR_SHAPE_TYPE" );
   }
-
-  return isOk;
+  return ok;
 }
 
 //=================================================================================
@@ -361,59 +263,28 @@ bool TransformationGUI_OffsetDlg::execute( ObjectList& objects )
 
   GEOM::GEOM_Object_var anObj;
 
-  GEOM::GEOM_ITransformOperations_var anOper =
-    GEOM::GEOM_ITransformOperations::_narrow(getOperation());
+  GEOM::GEOM_ITransformOperations_var anOper = GEOM::GEOM_ITransformOperations::_narrow(getOperation());
 
-  if (getConstructorId() == 0) {
-    for (int i = 0; i < myObjects.count(); i++) {
-      anObj = anOper->OffsetShapeCopy(myObjects[i].get(), GetOffset(), GetIsJoinByPipes());
-      if (!anObj->_is_nil()) {
-        if (!IsPreview()) {
+  if ( true /*GroupPoints->CheckButton1->isChecked() || IsPreview()*/ ) {
+    for ( int i = 0; i < myObjects.count(); i++ ) {
+
+      anObj = anOper->OffsetShapeCopy( myObjects[i].get(), GetOffset(), GetIsJoinByPipes() );
+      if ( !anObj->_is_nil() ) {
+        if(!IsPreview()) {
           anObj->SetParameters(GroupPoints->SpinBox_DX->text().toUtf8().constData());
         }
-        objects.push_back(anObj._retn());
-        res = true;
+        objects.push_back( anObj._retn() );
       }
     }
   }
-  else if (getConstructorId() == 1) {
-    if (myObjects.count() == 1) {
-      TopoDS_Shape aShape;
-      if (GEOMBase::GetShape(myObjects[0].get(), aShape)) {
-        TopTools_IndexedMapOfShape aMainMap;
-        TopExp::MapShapes(aShape, aMainMap);
-
-        QList<int> aListIDs;
-        for (int i = 0; i < myFaces.count(); i++) {
-          TopoDS_Shape aFace;
-          if (GEOMBase::GetShape(myFaces[i].get(), aFace)) {
-            int anIndex = aMainMap.FindIndex(aFace);
-            if (anIndex >= 0) {
-              aListIDs << anIndex;
-            }
-          }
-        }
-
-        GEOM::ListOfLong_var aFacesIDsList = new GEOM::ListOfLong();
-        if (!aListIDs.empty()) {
-          aFacesIDsList->length(aListIDs.length());
-          for (int i = 0; i < aListIDs.length(); i++) {
-            aFacesIDsList[i] = aListIDs[i];
-          }
-        }
-
-        anObj = anOper->OffsetShapePartialCopy
-          (myObjects[0].get(), GetOffset(), aFacesIDsList);
-        if (!anObj->_is_nil()) {
-          if (!IsPreview()) {
-            anObj->SetParameters(GroupPoints->SpinBox_DX->text().toUtf8().constData());
-          }
-          objects.push_back(anObj._retn());
-          res = true;
-        }
-      }
+  else {
+    for ( int i = 0; i < myObjects.count(); i++ ) {
+      anObj = anOper->OffsetShape( myObjects[i].get(), GetOffset(), GetIsJoinByPipes()  );
+      if ( !anObj->_is_nil() )
+        objects.push_back( anObj._retn() );
     }
   }
+  res = true;
 
   return res;
 }
@@ -459,6 +330,7 @@ bool TransformationGUI_OffsetDlg::GetIsJoinByPipes() const
 void TransformationGUI_OffsetDlg::JoinModeChanged()
 {
   processPreview();
+  //mainFrame()->GroupBoxName->setEnabled( GroupPoints->CheckButton1->isChecked() );
 }
 
 //=================================================================================

src/TransformationGUI/TransformationGUI_OffsetDlg.h

@@ -30,14 +30,14 @@
 #include "GEOMBase_Skeleton.h"
 #include "GEOM_GenericObjPtr.h"
 
-class DlgRef_2Sel1Spin2Check;
-
+class DlgRef_1Sel1Spin1Check;  
+  
 //=================================================================================
 // class    : TransformationGUI_OffsetDlg
 // purpose  :
 //=================================================================================
 class TransformationGUI_OffsetDlg : public GEOMBase_Skeleton
-{
+{ 
   Q_OBJECT
 
 public:
@@ -52,26 +52,24 @@ protected:
   virtual bool                       execute( ObjectList& );
   virtual void                       restoreSubShapes( SALOMEDS::SObject_ptr );
   virtual QList<GEOM::GeomObjPtr>    getSourceObjects();
-
+  
 private:
   void                               Init();
   void                               enterEvent( QEvent* );
   double                             GetOffset() const;
   bool                               GetIsJoinByPipes() const;
-
+    
 private:
   QList<GEOM::GeomObjPtr>            myObjects;
-  QList<GEOM::GeomObjPtr>            myFaces;
-
-  DlgRef_2Sel1Spin2Check*            GroupPoints;
-
+    
+  DlgRef_1Sel1Spin1Check*            GroupPoints;
+    
 private slots:
   void                               ClickOnOk();
   bool                               ClickOnApply();
   void                               ActivateThisDialog();
   void                               SelectionIntoArgument();
   void                               SetEditCurrentArgument();
-  void                               ConstructorsClicked(int);
   void                               ValueChangedInSpinBox();
   void                               JoinModeChanged();
 };

src/VTKPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

src/XAOPlugin/CMakeLists.txt

@@ -26,7 +26,6 @@ ENDIF()
 # additional include directories
 INCLUDE_DIRECTORIES(
   ${OpenCASCADE_INCLUDE_DIR}
-  ${CommonGeomLib_INCLUDE_DIRS}
   ${KERNEL_INCLUDE_DIRS}
   ${PROJECT_BINARY_DIR}/idl
   ${PROJECT_SOURCE_DIR}/src/GEOMAlgo

test/data/ExtractBOPFailure_compound1.brep

@@ -1,388 +0,0 @@
-DBRep_DrawableShape
-
-CASCADE Topology V3, (c) Open Cascade
-Locations 2
-1
-              1               0               0       -7.567891 
-              0               1               0       -4.341567 
-              0               0               1       -6.123456 
-2  1 -1 0
-Curve2ds 20
-1 5.2296342291324773 3.3322056701893321 -0.019393351731739859 -0.99981193126938084 
-1 4.1177697329478473 -7.9576022773085979 0.74914523473738692 0.66240577991912586 
-2 7.6778616423679917 5.5784416873630649 1.0327963672288199e-28 1 -1 1.0327963672288199e-28 13.996383126259545
-1 1.2238101114815878 -6.1633524984935972 -0.18530824692372716 -0.98268044328868942 
-1 1.2235485004159372 -2.2110670843958085 6.6192351428950508e-05 -0.99999999780928628 
-1 -0.76442260860377154 0.24528750719338177 0.62910141048581703 -0.77732323735030318 
-1 -3.7293599477436921 -2.8998812708177271 0.68595070867481067 0.72764800918337236 
-2 8.2082756373678425 6.9866174666722882 1 -5.2064482382916161e-32 5.2064482382916161e-32 1 15.500000020945576
-1 -5.5702632964129428 -0.1128096580751663 0.62013158110931121 0.78449781523651529 
-1 -1.2787866923231981 5.3161253012195147 0.66335395303032052 -0.74830577506728313 
-1 6.2831853071795862 -27.994292694933499 -1 0 
-1 2.2305029134341128 -29.744292694933499 0 1 
-1 1.1682335865018412e-13 -26.364292694933447 1 0 
-1 2.2737127428085482 -25.744292694933499 0 -1 
-1 1.1577157318429796e-13 -25.744292694933449 1 0 
-1 2.2305029134341128 -25.744292694933399 0 1 
-1 6.2831853071795862 -24.494292694933499 -1 0 
-7 0 0  5 6 2  2.66538798008808 -22.744292694933499  2.6653879800880054 -23.468292694933499  2.6653879800879281 -24.192292694933485  2.6653879800878677 -24.916292694933531  2.6653879800877802 -25.6402926949335  2.6653879800877056 -26.3642926949335 
- 0 6 3.6200000000000001 6
-1 -1.5707963267948966 -26.364292694933503 1 0 
-1 2.6969123268332003 -29.744292694933499 0 1 
-Curves 20
-1 3.6643099095142699 2.9989666286603298 7.3799999999999901 0.99981193126938084 0.019393351731739859 0 
-1 14.9541178570122 4.1108311248449603 7.3799999999999901 -0.66240577991912586 -0.74914523473738692 0 
-2 1.4180738923405372 0.55073921542481585 7.3800000000004342 -2.974710134687989e-14 -1.1637659715336122e-14 -1 -1 0 2.974710134687989e-14 -3.46186642992605e-28 1 -1.1637659715336122e-14 13.996383126259545
-1 13.159868078197199 7.0047907463112198 7.3799999999999901 0.98268044328868942 0.18530824692372716 0 
-1 9.2075826640994105 7.0050523573768704 7.3799999999999901 0.99999999780928628 -6.6192351428950508e-05 0 
-1 6.7512280725102203 8.9930234663965791 7.3799999999999901 0.77732323735030318 -0.62910141048581703 0 
-1 9.8963968505213291 11.9579608055365 7.3799999999999599 -0.72764800918337236 -0.68595070867481067 6.9864494891450316e-15 
-2 0.0098981130313138266 0.020325220424965096 7.3800000000000123 -4.8764518640683504e-16 -3.985833116056589e-15 -1 0 -1 3.985833116056589e-15 -1 1.9436723328659514e-30 4.8764518640683504e-16 15.500000020945576
-1 7.1093252377787683 13.79886415420575 7.3799999999999537 -0.78449781523651529 -0.62013158110931121 2.951923868206801e-15 
-1 1.6803902784840878 9.5073875501160057 7.3799999999999741 0.74830577506728313 -0.66335395303032052 1.65532199479636e-15 
-2 0.048629684365062174 0.040085253947511945 5.75 -1.8938307431288352e-32 -1.4228181456116284e-32 1 -1 0 -1.8938307431288352e-32 2.6945767460408616e-64 -1 -1.4228181456116284e-32 15.447113622753015
-1 9.5159344006809405 12.245963374044599 4 0 0 1 
-2 0.048629684364520642 0.040085253947925281 7.3800000000000505 -1.1682335865018412e-13 9.4687192060776203e-14 -1 -1 0 1.1682335865018412e-13 1.1061675797694924e-26 1 9.4687192060776203e-14 15.447113622753017
-1 10.0343474285764 11.8256170793334 8 0 0 -1 
-2 0.048629684364520642 0.040085253947925281 8.0000000000000497 -1.1577157318429796e-13 9.3871390575314678e-14 -1 -1 0 1.1577157318429796e-13 1.0867638563901861e-26 1 9.3871390575314678e-14 15.447113622753017
-1 9.5159344006809405 12.245963374044599 8.0000000000000995 0 0 1 
-2 0.048629684365062174 0.040085253947511945 9.25 -1.8938307431288352e-32 -1.4228181456116284e-32 1 -1 0 -1.8938307431288352e-32 2.6945767460408616e-64 -1 -1.4228181456116284e-32 15.447113622753015
-1 13.7771149464134 7.1211876881706102 11 -7.183940367077256e-13 1.4252564751486263e-12 -1 
-2 0.048629684365860015 0.040085253945864707 7.3799999999999955 -8.9410861073054036e-15 1.7961675054224776e-14 -1 0 -1 -1.7961675054224776e-14 -1 -1.6059688329126317e-28 8.9410861073054036e-15 15.447113622753015
-1 13.9934840908598 6.6849595835271503 4 0 0 1 
-Polygon3D 0
-PolygonOnTriangulations 0
-Surfaces 2
-1 6.9965155797036021 8.2286008577928076 7.3799999999999759 1.0131042642695293e-16 -3.4719227099992637e-15 -1 0 -1 3.4719227099992637e-15 -1 -3.5174197027144744e-31 -1.0131042642695293e-16 
-2 0.048629684365062174 0.040085253947511945 33.744292694933499 -1.8938307431288352e-32 -1.4228181456116284e-32 1 -1 0 -1.8938307431288352e-32 -2.6945767460408616e-64 1 1.4228181456116284e-32 15.447113622753015
-Triangulations 0
-
-TShapes 45
-Ve
-0.00100000000000355
-1.33968696229361 -1.24089670248843 1.25654399999999
-0 0
-
-0101101
-*
-Ve
-0.001
-6.582955015073 -1.13919303363718 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  1 0 5.2442543330348 10.4885086660696
-2  1 1 0 5.2442543330348 10.4885086660696
-0
-
-0101000
-+45 2 -44 2 *
-Ve
-0.001
-7.3862268570122 -0.23073587515504 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  2 0 0 1.21265826218677
-2  2 1 0 0 1.21265826218677
-0
-
-0101000
-+42 2 -44 2 *
-Ve
-0.001
-6.2085640030866 2.77949617536757 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  3 0 2.65294738721352 2.88440884989702
-2  3 1 0 2.65294738721352 2.88440884989702
-0
-
-0101000
-+40 2 -42 2 *
-Ve
-0.001
-5.5919770781972 2.66322374631122 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  4 0 0 0.627454152670321
-2  4 1 0 0 0.627454152670321
-0
-
-0101000
-+38 2 -40 2 *
-Ve
-0.001
-1.63969166409941 2.66348535737687 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  5 0 0 3.95228542275611
-2  5 1 0 0 3.95228542275611
-0
-
-0101000
-+36 2 -38 2 *
-Ve
-0.001
--0.81666292748978 4.65145646639658 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  6 0 0 3.16001693190374
-2  6 1 0 0 3.16001693190374
-0
-
-0101000
-+34 2 -36 2 *
-Ve
-0.001
-2.32850585052133 7.6163938055365 1.25654399999996
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  7 0 0 4.32237666882492
-2  7 1 0 0 4.32237666882492
-0
-
-0101000
-+32 2 -34 2 *
-Ve
-0.00100000000000266
--0.45856576222123 9.4572971542058 1.25654399999995
-0 0
-
-0101101
-*
-Ed
- 0.001 1 1 0
-1  8 0 3.61736770330259 3.83328128895929
-2  8 1 0 3.61736770330259 3.83328128895929
-0
-
-0101000
-+30 2 -32 2 *
-Ve
-0.00100000000000355
--5.88750072151591 5.16582055011601 1.25654399999997
-0 0
-
-0101101
-*
-Ed
- 0.00100000000000266 1 1 0
-1  9 0 0 6.92026778641561
-2  9 1 0 0 6.92026778641561
-0
-
-0101000
-+30 2 -28 2 *
-Ed
- 0.00100000000000355 1 1 0
-1  10 0 0 9.65806749675251
-2  10 1 0 0 9.65806749675251
-0
-
-0101000
-+28 2 -45 2 *
-Wi
-
-0101100
--43 0 +41 0 +39 0 +37 0 +35 0 +33 0 +31 0 +29 0 -27 0 -26 0 
-*
-Fa
-0  0.001 1 0
-
-0111000
-+25 0 *
-Ve
-0.001100100001
-6.4255930908598 2.34339258352715 -0.373456
-0 0
-
-0101101
-*
-Ve
-0.001100100001
-1.94804340068094 7.9043963740446 -0.373456
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  11 0 3.58627298034639 4.05268239374548
-2  11 2 0 3.58627298034639 4.05268239374548
-0
-
-0101000
-+23 2 -22 2 *
-Ve
-0.0011
-1.94804340068094 7.9043963740446 1.2565440000001
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  12 0 1.75 3.3800000000001
-2  12 2 0 1.75 3.3800000000001
-0
-
-0101000
-+22 2 -20 2 *
-Ve
-0.0011
-2.4664564285764 7.4840500793334 1.256544
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  13 0 2.23050291343416 2.27371274280859
-2  13 2 0 2.23050291343416 2.27371274280859
-0
-
-0101000
-+20 2 -18 2 *
-Ve
-0.0011
-2.4664564285764 7.4840500793334 1.876544
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  14 0 0 0.62
-2  14 2 0 0 0.62
-0
-
-0101000
-+16 2 -18 2 *
-Ve
-0.0011
-1.94804340068094 7.9043963740446 1.8765440000001
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  15 0 2.23050291343416 2.27371274280859
-2  15 2 0 2.23050291343416 2.27371274280859
-0
-
-0101000
-+14 2 -16 2 *
-Ve
-0.001100100001
-1.94804340068094 7.9043963740446 3.126544
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  16 0 0 1.2499999999999
-2  16 2 0 0 1.2499999999999
-0
-
-0101000
-+14 2 -12 2 *
-Ve
-0.001100100001
-6.2092239464121 2.7796206881731 3.126544
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  17 0 3.61779732709169 4.05268239374548
-2  17 2 0 3.61779732709169 4.05268239374548
-0
-
-0101000
-+10 2 -12 2 *
-Ve
-0.0011
-6.2092239464108 2.77962068817577 1.256544
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  18 0 1.75 3.62
-2  18 2 0 1.75 3.62
-0
-
-0101000
-+10 2 -8 2 *
-Ve
-0.0011
-6.4255930908598 2.34339258352715 1.25654399999999
-0 0
-
-0101101
-*
-Ed
- 0.0011 1 1 0
-1  19 0 4.23618430688248 4.26770865362798
-2  19 2 0 4.23618430688248 4.26770865362798
-0
-
-0101000
-+8 2 -6 2 *
-Ed
- 0.0011 1 1 0
-1  20 0 1.75 3.37999999999999
-2  20 2 0 1.75 3.37999999999999
-0
-
-0101000
-+23 2 -6 2 *
-Wi
-
-0101100
--21 0 -19 0 -17 0 +15 0 +13 0 -11 0 +9 0 -7 0 -5 0 +4 0 
-*
-Fa
-0  0.0011 2 0
-
-0111000
-+3 0 *
-Co
-
-1100000
-+24 0 -2 0 *
-
-+1 1 
-0
-

test/test_ExtractBOPFailure.py

@@ -1,85 +0,0 @@
-# Copyright (C) 2024  CEA, EDF
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# Test ExtractBOPFailure method
-
-from inspect import getfile
-from os.path import abspath, dirname, join
-import salome
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-data_dir = abspath(join(dirname(getfile(lambda: None)), 'data'))
-
-### Case 1: Invalid face with (3) intersecting wires
-Shapes_1 = geompy.ImportBREP(join(data_dir, "ExtractBOPFailure_compound1.brep"))
-geompy.addToStudy( Shapes_1, 'CompoundPostIdealisation' )
-
-try :
-  Partition_1 = geompy.MakePartition([Shapes_1],[])
-except :
-  print("EXCEPTION: Partition problem")
-
-print("Case 1: Invalid face with (3) intersecting wires")
-(IsValid, GFRes, ShapeErrors) = geompy.ExtractBOPFailure([Shapes_1], theTimer=True, theVerbose=True)
-
-assert GFRes is not None, "Resulting shape expected in Case #1"
-geompy.addToStudy( GFRes, 'GFRes_Case_1' )
-assert not IsValid, "IsValid == False expected in Case #1"
-
-assert len(ShapeErrors) == 1, "One error expected"
-list_ids = ShapeErrors[0].incriminated
-assert len(list_ids) == 1, "One incriminated shape expected"
-
-[Face_1] = geompy.SubShapes(GFRes, list_ids)
-geompy.addToStudyInFather( GFRes, Face_1, 'Bad face' )
-
-list_wires = geompy.ExtractShapes(Face_1, geompy.ShapeType["WIRE"], True, "Wire")
-
-assert len(list_wires) == 3, "Three wires expected"
-
-### Case 2: Empty list of input shapes
-print("Case 2: Empty list of input shapes")
-(IsValid, GFRes, ShapeErrors) = geompy.ExtractBOPFailure([], theVerbose=True)
-assert GFRes is None, "General Fuse result is NOT expected on empty list of shapes"
-assert not IsValid, "IsValid == False expected on empty list of shapes"
-assert len(ShapeErrors) == 0, "ExtractBOPFailure should report no errors on empty list of shapes"
-
-### Case 3: One shape in list, and it is not a COMPOUND
-print("Case 3: One shape in list, and it is not a COMPOUND")
-(IsValid, GFRes, ShapeErrors) = geompy.ExtractBOPFailure([geompy.MakeBoxDXDYDZ(10,10,10)], theVerbose=True)
-assert GFRes is None, "General Fuse result is NOT expected"
-assert not IsValid, "IsValid == False expected"
-assert len(ShapeErrors) == 0, "ExtractBOPFailure should report no errors here"
-
-### Case 4: Unusual type Case (two orthogonal faces, Partition OK)
-print("Case 4: Unusual type Case (two orthogonal faces, Partition OK)")
-origin = geompy.MakeVertex(0,0,0)
-oX = geompy.MakeVectorDXDYDZ(1,0,0)
-YOZ = geompy.MakePlane(origin, oX, 5)
-oY = geompy.MakeVectorDXDYDZ(0,1,0)
-XOZ = geompy.MakePlane(origin, oY, 5)
-(IsValid, GFRes, ShapeErrors) = geompy.ExtractBOPFailure([YOZ, XOZ], theVerbose=True)
-assert GFRes is not None, "General Fuse result is expected"
-geompy.addToStudy( GFRes, 'GFRes_Case_4' )
-assert IsValid, "Valid result is expected"
-assert len(ShapeErrors) == 0, "ExtractBOPFailure should report no errors here"
-
-if salome.sg.hasDesktop():
-  salome.sg.updateObjBrowser()

test/test_point_cloud_on_face_cone.py

@@ -1,27 +0,0 @@
-# Point Cloud on Face Cone
-
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-# Create one closed cone face
-O = geompy.MakeVertex(0, 0, 0)
-OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-Cone_1 = geompy.MakeConeR1R2H(50, 100, 50)
-[Face_1] = geompy.SubShapes(Cone_1, [3])
-geompy.addToStudy( O, 'O' )
-geompy.addToStudy( OX, 'OX' )
-geompy.addToStudy( OY, 'OY' )
-geompy.addToStudy( OZ, 'OZ' )
-geompy.addToStudy( Cone_1, 'Cone_1' )
-geompy.addToStudyInFather( Cone_1, Face_1, 'Face_1' )
-
-# Make a cloud of given number of points in range 1-30 on the cone face
-try:
-    for i in range(1, 31):
-        PointCloudOnFilling = geompy.MakeVertexInsideFace(Face_1, i, "PointCloudOnFilling")
-except Exception as err:
-    print(err)
-    # this test should not fail in case of "Improper OCCT version"
-    assert("Improper OCCT version" in str(err))

test/test_set_autocolor.py

@@ -1,43 +0,0 @@
-#!/usr/bin/env python3
-# Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
-#
-# This library is free software; you can redistribute it and/or
-# modify it under the terms of the GNU Lesser General Public
-# License as published by the Free Software Foundation; either
-# version 2.1 of the License, or (at your option) any later version.
-#
-# This library is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# Lesser General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public
-# License along with this library; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-#
-# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
-#
-
-# Testing of setting and getting an automatically set color
-
-import salome
-salome.salome_init()
-
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-# Create a box and extract its faces
-Box_1 = geompy.MakeBoxDXDYDZ(200, 200, 200)
-faces = geompy.ExtractShapes(Box_1, geompy.ShapeType["FACE"], True)
-Box_1.SetAutoColor(1)
-geompy.addToStudy(Box_1, 'Box_1')
-
-# Add each face to the study with a numeric name
-for i, face in enumerate(faces, start=1):
-    geompy.addToStudyInFather(Box_1, face, f'Face_{i}')
-
-# Check color of each face
-for face in faces:
-    color = face.GetColor()
-    print(f'{face.GetName()}: {color}')
-    assert color.R != -1 and color.G != -1 and color.B != -1, 'Auto color must be different than (-1, -1, -1)'

test/tests.set

@@ -20,13 +20,10 @@
 SET(ALL_TESTS
   test_perf_01.py
   test_patch_face_01.py
-  test_set_autocolor.py
-  test_ExtractBOPFailure.py
-)
+  )
 
 IF(${OpenCASCADE_VERSION}.${OpenCASCADE_SP_VERSION} VERSION_GREATER "7.5.3.3")
     LIST(APPEND ALL_TESTS
-      test_point_cloud_on_face_cone.py
       test_point_cloud_on_face.py
       test_CR.py
       test_conformity.py