// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE // // Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2.1 of the License. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // #ifdef WNT #pragma warning( disable:4786 ) #endif #include #include #include #include #include #include #include #include #include #include #include #include "utilities.h" #include #include #include #include #include #include #include #include #include #include #include #include // CAREFUL ! position of this file is critic : see Lucien PIGNOLONI / OCC //============================================================================= /*! * constructor: */ //============================================================================= GEOMImpl_IHealingOperations::GEOMImpl_IHealingOperations (GEOM_Engine* theEngine, int theDocID) : GEOM_IOperations(theEngine, theDocID) { MESSAGE("GEOMImpl_IHealingOperations::GEOMImpl_IHealingOperations"); } //============================================================================= /*! * destructor */ //============================================================================= GEOMImpl_IHealingOperations::~GEOMImpl_IHealingOperations() { MESSAGE("GEOMImpl_IHealingOperations::~GEOMImpl_IHealingOperations"); } //============================================================================= /*! * ShapeProcess */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::ShapeProcess (Handle(GEOM_Object) theObject, const Handle(TColStd_HArray1OfExtendedString)& theOperators, const Handle(TColStd_HArray1OfExtendedString)& theParams, const Handle(TColStd_HArray1OfExtendedString)& theValues) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; if (theOperators.IsNull() || theOperators->Length() <= 0) { SetErrorCode("No operators requested"); return NULL; } Standard_Integer nbParams = 0, nbValues = 0; if (!theParams.IsNull()) { nbParams = theParams->Length(); } if (!theValues.IsNull()) { nbValues = theValues->Length(); } if (nbParams != nbValues) { SetErrorCode("Number of parameter values must be equal to the number of parameters"); return NULL; } Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), SHAPE_PROCESS); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetOriginal(aLastFunction); HI.SetOperators( theOperators ); if (nbParams > 0) { HI.SetParameters( theParams ); HI.SetValues( theValues ); } //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Shape Healing algorithm failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump pd (aFunction); pd << aNewObject << " = geompy.ProcessShape(" << theObject << ", ["; // list of operators int i = theOperators->Lower(), nb = theOperators->Upper(); for ( ; i <= nb; i++) { pd << "\"" << TCollection_AsciiString(theOperators->Value( i )).ToCString() << (( i < nb ) ? "\", " : "\""); } pd << "], ["; // list of parameters i = theParams->Lower(); nb = theParams->Upper(); for ( ; i <= nb; i++) { pd << "\"" << TCollection_AsciiString(theParams->Value( i )).ToCString() << (( i < nb ) ? "\", " : "\""); } pd << "], ["; // list of values i = theValues->Lower(); nb = theValues->Upper(); for ( ; i <= nb; i++) { pd << "\"" << TCollection_AsciiString(theValues->Value( i )).ToCString() << (( i < nb ) ? "\", " : "\""); } pd << "])"; SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * ShapeProcess */ //============================================================================= void GEOMImpl_IHealingOperations::GetShapeProcessParameters (std::list& theOperations, std::list& theParams, std::list& theValues) { ShHealOper_ShapeProcess aHealer; TColStd_SequenceOfAsciiString anOperators; int nbOperatorErrors( 0 ); if ( aHealer.GetOperators( anOperators ) ) { for ( Standard_Integer i = 1; i <= anOperators.Length(); i++ ) { std::string anOperation = anOperators.Value( i ).ToCString(); if ( GetOperatorParameters( anOperation, theParams, theValues ) ) theOperations.push_back( anOperation ); else nbOperatorErrors++; } } else { SetErrorCode("ERROR retrieving operators (GEOMImpl_IHealingOperations)"); } if ( nbOperatorErrors ) { TCollection_AsciiString aMsg ("ERRORS retrieving ShapeProcess parameters (GEOMImpl_IHealingOperations): nbOperatorErrors = "); aMsg += TCollection_AsciiString( nbOperatorErrors ); MESSAGE(aMsg.ToCString()); } } //============================================================================= /*! * GetOperatorParameters */ //============================================================================= bool GEOMImpl_IHealingOperations::GetOperatorParameters( const std::string theOperation, std::list& theParams, std::list& theValues ) { ShHealOper_ShapeProcess aHealer; int nbParamValueErrors( 0 ); std::list aParams; if ( GetParameters( theOperation, aParams ) ) { for ( std::list::iterator it = aParams.begin(); it != aParams.end(); ++it ) { TCollection_AsciiString aParam( (Standard_CString)(*it).c_str() ); TCollection_AsciiString aValue; if ( aHealer.GetParameter( aParam, aValue ) ) { theParams.push_back( aParam.ToCString() ); theValues.push_back( aValue.ToCString() ); } else nbParamValueErrors++; } } else return false; if ( nbParamValueErrors ) { TCollection_AsciiString aMsg ("ERRORS retrieving ShapeProcess parameter values (GEOMImpl_IHealingOperations): nbParamValueErrors = "); aMsg += TCollection_AsciiString( nbParamValueErrors ); MESSAGE(aMsg.ToCString()); } return true; } //============================================================================= /*! * GetParameters */ //============================================================================= bool GEOMImpl_IHealingOperations::GetParameters (const std::string theOperation, std::list& theParams) { if ( theOperation == "SplitAngle" ) { theParams.push_back( "SplitAngle.Angle" ); theParams.push_back( "SplitAngle.MaxTolerance" ); } else if ( theOperation == "SplitClosedFaces" ) { theParams.push_back( "SplitClosedFaces.NbSplitPoints" ); } else if ( theOperation == "FixFaceSize" ) { theParams.push_back( "FixFaceSize.Tolerance" ); } else if( theOperation == "DropSmallEdges" ) { theParams.push_back( "DropSmallEdges.Tolerance3d" ); } else if( theOperation == "BSplineRestriction" ) { theParams.push_back( "BSplineRestriction.SurfaceMode" ); theParams.push_back( "BSplineRestriction.Curve3dMode" ); theParams.push_back( "BSplineRestriction.Curve2dMode" ); theParams.push_back( "BSplineRestriction.Tolerance3d" ); theParams.push_back( "BSplineRestriction.Tolerance2d" ); theParams.push_back( "BSplineRestriction.RequiredDegree" ); theParams.push_back( "BSplineRestriction.RequiredNbSegments" ); theParams.push_back( "BSplineRestriction.Continuity3d" ); theParams.push_back( "BSplineRestriction.Continuity2d" ); } else if( theOperation == "SplitContinuity" ) { theParams.push_back( "SplitContinuity.Tolerance3d" ); theParams.push_back( "SplitContinuity.SurfaceContinuity" ); theParams.push_back( "SplitContinuity.CurveContinuity" ); } else if( theOperation == "ToBezier" ) { theParams.push_back( "ToBezier.SurfaceMode" ); theParams.push_back( "ToBezier.Curve3dMode" ); theParams.push_back( "ToBezier.Curve2dMode" ); theParams.push_back( "ToBezier.MaxTolerance" ); } else if( theOperation == "SameParameter" ) { theParams.push_back( "SameParameter.Tolerance3d" ); } else if( theOperation == "FixShape" ) { theParams.push_back( "FixShape.Tolerance3d" ); theParams.push_back( "FixShape.MaxTolerance3d" ); } else { return false; } return true; } //============================================================================= /*! * SuppressFaces */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::SuppressFaces (Handle(GEOM_Object) theObject, const Handle(TColStd_HArray1OfInteger)& theFaces) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) // if theFaces.IsNull() - it's OK, it means that ALL faces must be removed.. return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject(GetDocID(), GEOM_COPY); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), SUPPRESS_FACES); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI (aFunction); HI.SetFaces(theFaces); HI.SetOriginal(aLastFunction); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump pd (aFunction); pd << aNewObject << " = geompy.SuppressFaces(" << theObject << ", ["; // list of face ids int i = theFaces->Lower(), nb = theFaces->Upper(); for ( ; i <= nb; i++) pd << theFaces->Value( i ) << (( i < nb ) ? ", " : "])"); SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * CloseContour */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::CloseContour (Handle(GEOM_Object) theObject, const Handle(TColStd_HArray1OfInteger)& theWires, bool isCommonVertex) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) { SetErrorCode("NULL object given"); return NULL; } Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), CLOSE_CONTOUR); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if(aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetWires( theWires ); HI.SetIsCommonVertex( isCommonVertex ); HI.SetOriginal( aLastFunction ); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump pd (aFunction); pd << aNewObject << " = geompy.CloseContour(" << theObject << ", ["; // list of wire ids if (!theWires.IsNull()) { int i = theWires->Lower(), nb = theWires->Upper(); pd << theWires->Value(i++); while (i <= nb) pd << ", " << theWires->Value(i++); } pd << "], " << (int)isCommonVertex << ")"; SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * RemoveIntWires */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::RemoveIntWires (Handle(GEOM_Object) theObject, const Handle(TColStd_HArray1OfInteger)& theWires) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) // if theWires is NULL it's OK, it means that ALL wires must be removed return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), REMOVE_INT_WIRES); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetWires( theWires ); HI.SetOriginal( aLastFunction ); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump pd (aFunction); pd << aNewObject << " = geompy.SuppressInternalWires(" << theObject << ", ["; // list of wire ids if (!theWires.IsNull()) { int i = theWires->Lower(), nb = theWires->Upper(); for ( ; i <= nb; i++) pd << theWires->Value( i ) << (( i < nb ) ? ", " : "])"); } else { pd << "])"; } SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * FillHoles */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::FillHoles (Handle(GEOM_Object) theObject, const Handle(TColStd_HArray1OfInteger)& theWires) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) // if theWires is NULL it's OK, it means that ALL holes must be removed return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), FILL_HOLES); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetWires( theWires ); HI.SetOriginal( aLastFunction ); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump pd (aFunction); pd << aNewObject << " = geompy.SuppressHoles(" << theObject << ", ["; // list of wire ids if ( theWires.IsNull() ) pd << "])"; else { int i = theWires->Lower(), nb = theWires->Upper(); for ( ; i <= nb; i++) pd << theWires->Value( i ) << (( i < nb ) ? ", " : "])"); } SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * Sew */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::Sew (Handle(GEOM_Object) theObject, double theTolerance) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), SEWING); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetTolerance( theTolerance ); HI.SetOriginal( aLastFunction ); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump(aFunction) << aNewObject << " = geompy.Sew(" << theObject << ", " << theTolerance << ")"; SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * DivideEdge */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::DivideEdge (Handle(GEOM_Object) theObject, int theIndex, double theValue, bool isByParameter) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject( GetDocID(), GEOM_COPY ); //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), DIVIDE_EDGE); if (aFunction.IsNull()) return NULL; //Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI(aFunction); HI.SetIndex( theIndex ); HI.SetDevideEdgeValue( theValue ); HI.SetIsByParameter( isByParameter ); HI.SetOriginal( aLastFunction ); //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump(aFunction) << aNewObject << " = geompy.DivideEdge(" << theObject << ", " << theIndex << ", " << theValue << ", " << (int)isByParameter << ")"; SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * FuseCollinearEdgesWithinWire */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::FuseCollinearEdgesWithinWire (Handle(GEOM_Object) theWire, std::list theVertices) { SetErrorCode(KO); if (theWire.IsNull()) return NULL; // Add a new object Handle(GEOM_Object) aRes = GetEngine()->AddObject(GetDocID(), theWire->GetType()); // Add a new function Handle(GEOM_Function) aFunction; aFunction = aRes->AddFunction(GEOMImpl_HealingDriver::GetID(), FUSE_COLLINEAR_EDGES); if (aFunction.IsNull()) return NULL; // Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; GEOMImpl_IHealing aCI (aFunction); Handle(GEOM_Function) aRefShape = theWire->GetLastFunction(); if (aRefShape.IsNull()) return NULL; aCI.SetOriginal(aRefShape); Handle(TColStd_HSequenceOfTransient) aVertices = new TColStd_HSequenceOfTransient; std::list::iterator it = theVertices.begin(); for (; it != theVertices.end(); it++) { Handle(GEOM_Function) aRefSh = (*it)->GetLastFunction(); if (aRefSh.IsNull()) { SetErrorCode("NULL argument shape for the shape construction"); return NULL; } aVertices->Append(aRefSh); } aCI.SetShapes(aVertices); // Compute the new wire try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } // Make a Python command GEOM::TPythonDump pd (aFunction); pd << aRes << " = geompy.FuseCollinearEdgesWithinWire(" << theWire << ", ["; // Vertices it = theVertices.begin(); if (it != theVertices.end()) { pd << (*it++); while (it != theVertices.end()) { pd << ", " << (*it++); } } pd << "])"; SetErrorCode(OK); return aRes; } //============================================================================= /*! * GetFreeBoundary */ //============================================================================= bool GEOMImpl_IHealingOperations::GetFreeBoundary (Handle(GEOM_Object) theObject, Handle(TColStd_HSequenceOfTransient)& theClosed, Handle(TColStd_HSequenceOfTransient)& theOpen ) { // set error code, check parameters SetErrorCode(KO); if ( theObject.IsNull() || theClosed.IsNull() || theOpen.IsNull() ) return false; TopoDS_Shape aShape = theObject->GetValue(); if ( aShape.IsNull() ) return false; // get free boundary shapes #if OCC_VERSION_LARGE > 0x06030008 ShapeAnalysis_FreeBounds anAnalizer(aShape, Standard_False, Standard_True, Standard_True); #else ShapeAnalysis_FreeBounds anAnalizer(aShape); #endif TopoDS_Compound aClosed = anAnalizer.GetClosedWires(); TopoDS_Compound anOpen = anAnalizer.GetOpenWires(); // iterate through shapes and append them to the return sequence Handle(GEOM_Object) anObj; Handle(GEOM_Function) aFunction; TopExp_Explorer anExp; for ( anExp.Init( aClosed, TopAbs_WIRE ); anExp.More(); anExp.Next() ) { anObj = GetEngine()->AddObject( GetDocID(), GEOM_FREE_BOUNDS ); aFunction = anObj->AddFunction( GEOMImpl_CopyDriver::GetID(), COPY_WITHOUT_REF ); TopoDS_Shape aValueShape = anExp.Current(); aFunction->SetValue( aValueShape ); theClosed->Append(anObj); } for ( anExp.Init( anOpen, TopAbs_WIRE ); anExp.More(); anExp.Next() ) { anObj = GetEngine()->AddObject( GetDocID(), GEOM_FREE_BOUNDS ); aFunction = anObj->AddFunction( GEOMImpl_CopyDriver::GetID(), COPY_WITHOUT_REF ); TopoDS_Shape aValueShape = anExp.Current(); aFunction->SetValue( aValueShape ); theOpen->Append(anObj); } if(!aFunction.IsNull()) { //Make a Python command GEOM::TPythonDump pd (aFunction); Standard_Integer i, aLen = theClosed->Length(); if (aLen > 0) { pd << "(isDone, ["; for (i = 1; i <= aLen; i++) { Handle(GEOM_Object) anObj_i = Handle(GEOM_Object)::DownCast(theClosed->Value(i)); pd << anObj_i << ((i < aLen) ? ", " : ""); } pd << "], "; } else { pd << "(isDone, empty_list, "; } aLen = theOpen->Length(); if (aLen > 0) { pd << "["; for (i = 1; i <= aLen; i++) { Handle(GEOM_Object) anObj_i = Handle(GEOM_Object)::DownCast(theOpen->Value(i)); pd << anObj_i << ((i < aLen) ? ", " : ""); } pd << "]"; } else { pd << "empty_list"; } pd << ") = geompy.GetFreeBoundary(" << theObject << ")"; } SetErrorCode(OK); return true; } //============================================================================= /*! * ChangeOrientation */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::ChangeOrientation (Handle(GEOM_Object) theObject) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; if (!theObject->IsMainShape()) { SetErrorCode("Sub-shape cannot be transformed - need to create a copy"); return NULL; } Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed if (theObject->GetType() == GEOM_VECTOR) { // Mantis issue 21066 //Add the function aFunction = theObject->AddFunction(GEOMImpl_VectorDriver::GetID(), VECTOR_REVERSE); //Check if the function is set correctly if (aFunction.IsNull()) return NULL; if (aFunction->GetDriverGUID() != GEOMImpl_VectorDriver::GetID()) return NULL; // prepare "data container" class IVector GEOMImpl_IVector aVI (aFunction); aVI.SetCurve(aLastFunction); } else { //Add the function aFunction = theObject->AddFunction(GEOMImpl_HealingDriver::GetID(), CHANGE_ORIENTATION); //Check if the function is set correctly if (aFunction.IsNull()) return NULL; if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing HI (aFunction); HI.SetOriginal(aLastFunction); } //Compute the translation try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump(aFunction) << "geompy.ChangeOrientationShell(" << theObject << ")"; SetErrorCode(OK); return theObject; } //============================================================================= /*! * ChangeOrientationCopy */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::ChangeOrientationCopy (Handle(GEOM_Object) theObject) { // set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject(GetDocID(), theObject->GetType()); if (theObject->GetType() == GEOM_VECTOR) { // Mantis issue 21066 //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_VectorDriver::GetID(), VECTOR_REVERSE); //Check if the function is set correctly if (aFunction.IsNull()) return NULL; if (aFunction->GetDriverGUID() != GEOMImpl_VectorDriver::GetID()) return NULL; // prepare "data container" class IVector GEOMImpl_IVector aVI (aFunction); aVI.SetCurve(aLastFunction); } else { //Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), CHANGE_ORIENTATION); //Check if the function is set correctly if (aFunction.IsNull()) return NULL; if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // prepare "data container" class IHealing GEOMImpl_IHealing aHI (aFunction); aHI.SetOriginal(aLastFunction); } // Compute the result try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } //Make a Python command GEOM::TPythonDump(aFunction) << aNewObject << " = geompy.ChangeOrientationShellCopy(" << theObject << ")"; SetErrorCode(OK); return aNewObject; } //============================================================================= /*! * LimitTolerance */ //============================================================================= Handle(GEOM_Object) GEOMImpl_IHealingOperations::LimitTolerance (Handle(GEOM_Object) theObject, double theTolerance) { // Set error code, check parameters SetErrorCode(KO); if (theObject.IsNull()) return NULL; Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction(); if (aLastFunction.IsNull()) return NULL; // There is no function which creates an object to be processed // Add a new object Handle(GEOM_Object) aNewObject = GetEngine()->AddObject(GetDocID(), theObject->GetType()); // Add the function aFunction = aNewObject->AddFunction(GEOMImpl_HealingDriver::GetID(), LIMIT_TOLERANCE); if (aFunction.IsNull()) return NULL; // Check if the function is set correctly if (aFunction->GetDriverGUID() != GEOMImpl_HealingDriver::GetID()) return NULL; // Prepare "data container" class IHealing GEOMImpl_IHealing HI (aFunction); HI.SetOriginal(aLastFunction); HI.SetTolerance(theTolerance); // Compute try { #if OCC_VERSION_LARGE > 0x06010000 OCC_CATCH_SIGNALS; #endif if (!GetSolver()->ComputeFunction(aFunction)) { SetErrorCode("Healing driver failed"); return NULL; } } catch (Standard_Failure) { Handle(Standard_Failure) aFail = Standard_Failure::Caught(); SetErrorCode(aFail->GetMessageString()); return NULL; } // Make a Python command GEOM::TPythonDump(aFunction) << aNewObject << " = geompy.LimitTolerance(" << theObject << ", " << theTolerance << ")"; SetErrorCode(OK); return aNewObject; }