import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create vertices, an edge, an arc, a wire, a face and a prism
p1 = geompy.MakeVertex(0,0,0)
p2 = geompy.MakeVertex(200,0,0)
p3 = geompy.MakeVertex(100,150,0)
edge = geompy.MakeEdge(p1,p2)
arc = geompy.MakeArc(p1,p3,p2)
wire = geompy.MakeWire([edge,arc])
face = geompy.MakeFace(wire, 1)
theShape = geompy.MakePrismVecH(face, edge, 130)
# check the shape at the beginning
print "Before ProcessShape:"
isValid = geompy.CheckShape(theShape)
if isValid == 0:
print "The shape is not valid"
else:
print "The shape seems to be valid"
# process the Shape
Operators = ["FixShape"]
Parameters = ["FixShape.Tolerance3d"]
Values = ["1e-7"]
PS = geompy.ProcessShape(theShape, Operators, Parameters, Values)
# check the shape at the end
print "After ProcessShape:"
isValid = geompy.CheckShape(PS)
if isValid == 0:
print "The shape is not valid"
raise RuntimeError, "It seems, that the ProcessShape() has failed"
else:
print "The shape seems to be valid"
# add in the study and display
Id_Shape = geompy.addToStudy(theShape, "Invalid Shape")
Id_PS = geompy.addToStudy(PS, "Processed Shape")
gg.createAndDisplayGO(Id_Shape)
gg.setDisplayMode(Id_Shape,1)
gg.createAndDisplayGO(Id_PS)
gg.setDisplayMode(Id_PS,1)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create a box
box = geompy.MakeBoxDXDYDZ(200, 200, 200)
# The list of IDs (IDList) for suppress faces
sup_faces = []
sup_faces = geompy.SubShapeAllSorted(box, geompy.ShapeType["FACE"])
# get indices of the sub-shape
f1_id = geompy.GetSubShapeID(box, sup_faces[3])
# remove faces from the given object (shape)
result = geompy.SuppressFaces(box, [f1_id])
# add objects in the study
id_box = geompy.addToStudy(box, "Box")
id_result = geompy.addToStudy(result, "Result")
# display the results
gg.createAndDisplayGO(id_box)
gg.setDisplayMode(id_box,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create vertices and vectors
p0 = geompy.MakeVertex( 0., 0., 0.)
px = geompy.MakeVertex(100., 0., 0.)
py = geompy.MakeVertex( 0., 100., 0.)
py1 = geompy.MakeVertex( 0., 140., 0.)
pz = geompy.MakeVertex( 0., 0., 100.)
vxy = geompy.MakeVector(px, py)
# create an arc
arc = geompy.MakeArc(py1, pz, px)
# create a wire
wire = geompy.MakeWire([vxy, arc])
# close an open wire by creation of an edge between ends
wire_close = geompy.CloseContour(wire, [1], 0)
# add objects in the study
id_wire = geompy.addToStudy(wire, "Wire")
id_wire_close = geompy.addToStudy(wire_close, "Wire close")
# display the results
gg.createAndDisplayGO(id_wire)
gg.createAndDisplayGO(id_wire_close)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create a vertex and a vector
p1 = geompy.MakeVertex(55, 65, 50)
p2 = geompy.MakeVertex(55, 0, 50)
v = geompy.MakeVector(p1, p2)
# create a cylinder
height = 100
radius1 = 40
cylinder = geompy.MakeCylinder(p1, v, radius1, height)
# create a box
box = geompy.MakeBoxDXDYDZ(100, 100, 100)
# make a cut
cut = geompy.MakeCut(box, cylinder)
# suppress all internal wires
result = geompy.SuppressInternalWires(cut, [])
# add objects in the study
id_cut = geompy.addToStudy(cut, "Cut")
id_result = geompy.addToStudy(result, "Result")
# display the results
gg.createAndDisplayGO(id_cut)
gg.setDisplayMode(id_cut,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create a vertex and a vector
p1 = geompy.MakeVertex(35, 35, 0)
p2 = geompy.MakeVertex(35, 35, 50)
v = geompy.MakeVector(p1, p2)
# create a cylinder
height = 20
radius1 = 20
cylinder = geompy.MakeCylinder(p1, v, radius1, height)
# create a cone
cone = geompy.MakeCone(p1, v, 70, 0, 80)
# make a cut
cut = geompy.MakeCut(cone, cylinder)
# get faces as sub-shapes
faces = []
faces = geompy.SubShapeAllSorted(cut, geompy.ShapeType["FACE"])
f_2 = geompy.GetSubShapeID(cut, faces[2])
# remove one face from the shape
cut_without_f_2 = geompy.SuppressFaces(cut, [f_2])
# get wires as sub-shapes
wires = []
wires = geompy.SubShapeAllSorted(cut_without_f_2, geompy.ShapeType["WIRE"])
w_0 = geompy.GetSubShapeID(cut_without_f_2, wires[0])
# suppress the selected wire
result = geompy.SuppressHoles(cut_without_f_2, [w_0])
# add objects in the study
id_cut = geompy.addToStudy(cut, "Cut")
id_cut_without_f_2 = geompy.addToStudy(cut_without_f_2, "Cut without f_2")
id_result = geompy.addToStudy(result, "Result")
# display the results
gg.createAndDisplayGO(id_cut)
gg.setDisplayMode(id_cut,1)
gg.createAndDisplayGO(id_cut_without_f_2)
gg.setDisplayMode(id_cut_without_f_2,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1)
import geompy
import salome
import math
gg = salome.ImportComponentGUI("GEOM")
# create base points
px = geompy.MakeVertex(100., 0., 0.)
py = geompy.MakeVertex(0., 100., 0.)
pz = geompy.MakeVertex(0., 0., 100.)
# create base geometry 2D & 3D
vector = geompy.MakeVector(px, py)
arc = geompy.MakeArc(py, pz, px)
# create base objects
angle = 45. * math.pi / 180
WantPlanarFace = 1 #True
wire = geompy.MakeWire([vector, arc])
face = geompy.MakeFace(wire, WantPlanarFace)
face_rot = geompy.MakeRotation(face, vector, angle)
# make sewing
precision = 0.00001
sewing = geompy.MakeSewing([face, face_rot], precision)
# add objects in the study
id_face = geompy.addToStudy(face, "Face")
id_face_rot = geompy.addToStudy(face_rot, "Face rotation")
id_sewing = geompy.addToStudy(sewing, "Sewing")
# display the results
gg.createAndDisplayGO(id_face)
gg.setDisplayMode(id_face,1)
gg.createAndDisplayGO(id_face_rot)
gg.setDisplayMode(id_face_rot,1)
gg.createAndDisplayGO(id_sewing)
gg.setDisplayMode(id_sewing,1)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create boxes
box1 = geompy.MakeBox(0,0,0,100,50,100)
box2 = geompy.MakeBox(100,0,0,250,50,100)
# make compound
compound = geompy.MakeCompound([box1, box2])
# glue compound's faces
tolerance = 1e-5
glue = geompy.MakeGlueFaces(compound, tolerance)
# add objects in study
id_box1 = geompy.addToStudy(box1, "Box1")
id_box2 = geompy.addToStudy(box2, "Box2")
id_compound = geompy.addToStudy(compound, "Compound")
id_glue = geompy.addToStudy(glue, "Glue faces")
# display results
gg.createAndDisplayGO(id_box1)
gg.setDisplayMode(id_box1,1)
gg.createAndDisplayGO(id_box2)
gg.setDisplayMode(id_box2,1)
gg.createAndDisplayGO(id_compound)
gg.setDisplayMode(id_compound,1)
gg.createAndDisplayGO(id_glue)
gg.setDisplayMode(id_glue,1)
import geompy
import salome
# create vertices
p1 = geompy.MakeVertex(0,0,50)
p2 = geompy.MakeVertex(60,0,50)
# make an edge
edge = geompy.MakeEdge(p1, p2) #geompy.GetSubShape(box, edge_ind)
# divide an edge
divide = geompy.DivideEdge(edge, -1, 0.5, 0)
# add objects in the study
id_edge = geompy.addToStudy(edge, "Edge")
edge_points = geompy.SubShapeAllSorted(edge, geompy.ShapeType["VERTEX"])
for point in edge_points:
geompy.addToStudyInFather(edge, point, "Edge's point")
id_divide = geompy.addToStudy(divide, "Divided edge")
edge_points = geompy.SubShapeAllSorted(divide, geompy.ShapeType["VERTEX"])
for point in edge_points:
geompy.addToStudyInFather(divide, point, "Edge's point after divide")
salome.sg.updateObjBrowser(1)
import os
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create boxes
box1 = geompy.MakeBox(0,0,0,100,50,100)
box2 = geompy.MakeBox(100,0,0,250,50,100)
# make a compound
compound = geompy.MakeCompound([box1, box2])
# import from *.brep
ImportBREP = geompy.ImportBREP("os.getenv("DATA_DIR")+"/Shapes/Brep/flight_solid.brep")
# get a face
faces = geompy.SubShapeAllSorted(ImportBREP, geompy.ShapeType["FACE"])
# get the free boundary for face 32
Res = geompy.GetFreeBoundary(faces[32])
isSuccess = Res[0]
ClosedWires = Res[1]
OpenWires = Res[2]
if isSuccess == 1 :
print "Checking free boudaries is OK."
else :
print "Checking free boudaries is KO!"
print "len(ClosedWires) = ", len(ClosedWires)
i = 0
for wire in ClosedWires :
wire_name = "Face 32 -> Close wires : WIRE %d"%(i+1)
geompy.addToStudy(ClosedWires[i], wire_name)
if i < len(ClosedWires) :
i = i+ 1
print "len(OpenWires) = ", len(OpenWires)
i = 0
for wire in OpenWires :
wire_name = "Face 32 -> Open wires : WIRE %d"%(i+1)
geompy.addToStudy(OpenWires[i], wire_name)
if i < len(OpenWires) :
i = i+ 1
# get the free boundary for face 41
Res = geompy.GetFreeBoundary(faces[41])
isSuccess = Res[0]
ClosedWires = Res[1]
OpenWires = Res[2]
if isSuccess == 1 :
print "Checking free boudaries is OK."
else :
print "Checking free boudaries is KO!"
print "len(ClosedWires) = ", len(ClosedWires)
i = 0
for wire in ClosedWires :
wire_name = "Face 41 -> Close wires : WIRE %d"%(i+1)
geompy.addToStudy(ClosedWires[i], wire_name)
if i < len(ClosedWires) :
i = i+ 1
print "len(OpenWires) = ", len(OpenWires)
i = 0
for wire in OpenWires :
wire_name = "Face 41 -> Open wires : WIRE %d"%(i+1)
geompy.addToStudy(OpenWires[i], wire_name)
if i < len(OpenWires) :
i = i+ 1
# add the imported object to the study
id_ImportBREP = geompy.addToStudy(ImportBREP, "ImportBREP")
salome.sg.updateObjBrowser(1)
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")
# create a vertex and a vector
p1 = geompy.MakeVertex(35, 35, 0)
p2 = geompy.MakeVertex(35, 35, 50)
v = geompy.MakeVector(p1, p2)
# create a cylinder
cylinder = geompy.MakeCone(p1, v, 30, 20, 20)
# create a cone
cone = geompy.MakeCone(p1, v, 70, 40, 60)
# make cut
cut = geompy.MakeCut(cone, cylinder)
# get faces as sub-shapes
faces = []
faces = geompy.SubShapeAllSorted(cut, geompy.ShapeType["FACE"])
f_2 = geompy.GetSubShapeID(cut, faces[0])
# remove one face from the shape
cut_without_f_2 = geompy.SuppressFaces(cut, [f_2])
# suppress the specified wire
result = geompy.GetFreeFacesIDs(cut_without_f_2)
print "A number of free faces is ", len(result)
# add objects in the study
all_faces = geompy.SubShapeAllSorted(cut_without_f_2, geompy.ShapeType["FACE"])
for face in all_faces :
sub_shape_id = geompy.GetSubShapeID(cut_without_f_2, face)
if result.count(sub_shape_id) > 0 :
face_name = "Free face %d"%(sub_shape_id)
geompy.addToStudy(face, face_name)
# in this example all faces from cut_without_f_2 are free
id_cut_without_f_2 = geompy.addToStudy(cut_without_f_2, "Cut without f_2")
# display the results
gg.createAndDisplayGO(id_cut_without_f_2)
gg.setDisplayMode(id_cut_without_f_2,1)