/*!

\page tui_repairing_operations_page Repairing Operations

\anchor tui_shape_processing
<br><h2>Shape Processing</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create vertices, an edge, an arc, a wire, a face and a prism
p1 = geompy.MakeVertex(0,0,0)
p2 = geompy.MakeVertex(200,0,0)
p3 = geompy.MakeVertex(100,150,0)
edge = geompy.MakeEdge(p1,p2)
arc  = geompy.MakeArc(p1,p3,p2)
wire = geompy.MakeWire([edge,arc])
face = geompy.MakeFace(wire, 1)
theShape = geompy.MakePrismVecH(face, edge, 130)

# check the shape at the beginning
print "Before ProcessShape:"
isValid = geompy.CheckShape(theShape)
if isValid == 0:
    print "The shape is not valid"
else:
    print "The shape seems to be valid"

# process the Shape
Operators = ["FixShape"]
Parameters = ["FixShape.Tolerance3d"]
Values = ["1e-7"]
PS = geompy.ProcessShape(theShape, Operators, Parameters, Values)

# check the shape at the end
print "After ProcessShape:"
isValid = geompy.CheckShape(PS)
if isValid == 0:
    print "The shape is not valid"
    raise RuntimeError, "It seems, that the ProcessShape() has failed"
else:
    print "The shape seems to be valid"

# add in the study and display
Id_Shape = geompy.addToStudy(theShape, "Invalid Shape")
Id_PS    = geompy.addToStudy(PS, "Processed Shape")
gg.createAndDisplayGO(Id_Shape)
gg.setDisplayMode(Id_Shape,1)
gg.createAndDisplayGO(Id_PS)
gg.setDisplayMode(Id_PS,1) 
\endcode

\anchor tui_suppress_faces
<br><h2>Suppress Faces</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create a box
box = geompy.MakeBoxDXDYDZ(200, 200, 200)

# The list of IDs (IDList) for suppress faces
sup_faces = []
sup_faces = geompy.SubShapeAllSortedCentres(box, geompy.ShapeType["FACE"])

# get indices of the sub-shape
f1_id = geompy.GetSubShapeID(box, sup_faces[3])

# remove faces from the given object (shape)
result = geompy.SuppressFaces(box, [f1_id])

# add objects in the study
id_box = geompy.addToStudy(box, "Box")
id_result = geompy.addToStudy(result, "Result")

# display the results
gg.createAndDisplayGO(id_box)
gg.setDisplayMode(id_box,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1)
\endcode

\anchor tui_close_contour
<br><h2>Close Contour</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create vertices and vectors
p0  = geompy.MakeVertex(  0.,   0.,   0.)
px  = geompy.MakeVertex(100.,   0.,   0.)
py  = geompy.MakeVertex(  0., 100.,   0.)
py1 = geompy.MakeVertex(  0., 140.,   0.)
pz  = geompy.MakeVertex(  0.,   0., 100.)
vxy = geompy.MakeVector(px, py)

# create an arc
arc = geompy.MakeArc(py1, pz, px)

# create a wire
wire = geompy.MakeWire([vxy, arc])

# close an open wire by creation of an edge between ends
wire_close = geompy.CloseContour(wire, [1], 0)

# add objects in the study
id_wire = geompy.addToStudy(wire, "Wire")
id_wire_close = geompy.addToStudy(wire_close, "Wire close")

# display the results
gg.createAndDisplayGO(id_wire)
gg.createAndDisplayGO(id_wire_close) 
\endcode

\anchor tui_suppress_internal_wires 
<br><h2>Suppress Internal Wires</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create a vertex and a vector
p1 = geompy.MakeVertex(55, 65, 50)
p2 = geompy.MakeVertex(55,  0, 50)
v = geompy.MakeVector(p1, p2)

# create a cylinder
height = 100
radius1 = 40
cylinder = geompy.MakeCylinder(p1, v, radius1, height)

# create a box
box = geompy.MakeBoxDXDYDZ(100, 100, 100)

# make a cut
cut = geompy.MakeCut(box, cylinder)

# suppress all internal wires
result = geompy.SuppressInternalWires(cut, [])

# add objects in the study
id_cut = geompy.addToStudy(cut, "Cut")
id_result = geompy.addToStudy(result, "Result")

# display the results
gg.createAndDisplayGO(id_cut)
gg.setDisplayMode(id_cut,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1) 
\endcode

\anchor tui_suppress_holes
<br><h2>Suppress Holes</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create a vertex and a vector
p1 = geompy.MakeVertex(35, 35, 0)
p2 = geompy.MakeVertex(35, 35, 50)
v = geompy.MakeVector(p1, p2)

# create a cylinder
height = 20
radius1 = 20
cylinder = geompy.MakeCylinder(p1, v, radius1, height)

# create a cone
cone = geompy.MakeCone(p1, v, 70, 0, 80)

# make a cut
cut = geompy.MakeCut(cone, cylinder)

# get faces as sub-shapes
faces = []
faces = geompy.SubShapeAllSortedCentres(cut, geompy.ShapeType["FACE"])
f_2 = geompy.GetSubShapeID(cut, faces[2])

# remove one face from the shape
cut_without_f_2 = geompy.SuppressFaces(cut, [f_2])

# get wires as sub-shapes
wires = []
wires = geompy.SubShapeAllSortedCentres(cut_without_f_2, geompy.ShapeType["WIRE"])
w_0 = geompy.GetSubShapeID(cut_without_f_2, wires[0])

# suppress the selected wire
result = geompy.SuppressHoles(cut_without_f_2, [w_0])

# add objects in the study
id_cut = geompy.addToStudy(cut, "Cut")
id_cut_without_f_2 = geompy.addToStudy(cut_without_f_2, "Cut without f_2")
id_result = geompy.addToStudy(result, "Result")

# display the results
gg.createAndDisplayGO(id_cut)
gg.setDisplayMode(id_cut,1)
gg.createAndDisplayGO(id_cut_without_f_2)
gg.setDisplayMode(id_cut_without_f_2,1)
gg.createAndDisplayGO(id_result)
gg.setDisplayMode(id_result,1) 
\endcode

\anchor tui_sewing
<br><h2>Sewing</h2>

\code
import geompy
import salome
import math
gg = salome.ImportComponentGUI("GEOM")

# create base points
px = geompy.MakeVertex(100., 0., 0.)
py = geompy.MakeVertex(0., 100., 0.)
pz = geompy.MakeVertex(0., 0., 100.)

# create base geometry 2D & 3D
vector = geompy.MakeVector(px, py)
arc = geompy.MakeArc(py, pz, px)

# create base objects
angle = 45. * math.pi / 180
WantPlanarFace = 1 #True
wire = geompy.MakeWire([vector, arc])
face = geompy.MakeFace(wire, WantPlanarFace)
face_rot = geompy.MakeRotation(face, vector, angle)

# make sewing
precision = 0.00001
sewing = geompy.MakeSewing([face, face_rot], precision)

# add objects in the study
id_face = geompy.addToStudy(face, "Face")
id_face_rot = geompy.addToStudy(face_rot, "Face rotation")
id_sewing = geompy.addToStudy(sewing, "Sewing")

# display the results
gg.createAndDisplayGO(id_face)
gg.setDisplayMode(id_face,1)
gg.createAndDisplayGO(id_face_rot)
gg.setDisplayMode(id_face_rot,1)
gg.createAndDisplayGO(id_sewing)
gg.setDisplayMode(id_sewing,1) 
\endcode

\anchor tui_glue_faces
<br><h2>Glue Faces</h2>

\code
import geompy
import salome
gg = salome.ImportComponentGUI("GEOM")

# create boxes
box1 = geompy.MakeBox(0,0,0,100,50,100)
box2 = geompy.MakeBox(100,0,0,250,50,100)

# make compound
compound = geompy.MakeCompound([box1, box2])

# glue compound's faces
tolerance = 1e-5
glue = geompy.MakeGlueFaces(compound, tolerance)

# add objects in study
id_box1 = geompy.addToStudy(box1, "Box1")
id_box2 = geompy.addToStudy(box2, "Box2")
id_compound = geompy.addToStudy(compound, "Compound")
id_glue = geompy.addToStudy(glue, "Glue faces")

# display results
gg.createAndDisplayGO(id_box1)
gg.setDisplayMode(id_box1,1)
gg.createAndDisplayGO(id_box2)
gg.setDisplayMode(id_box2,1)
gg.createAndDisplayGO(id_compound)
gg.setDisplayMode(id_compound,1)
gg.createAndDisplayGO(id_glue)
gg.setDisplayMode(id_glue,1) 
\endcode

\anchor tui_limit_tolerance
<br><h2>Limit Tolerance</h2>

\code
import geompy
gg = salome.ImportComponentGUI("GEOM")

# import initial topology
shape1 = geompy.ImportBREP("my_shape_1.brep")
shape2 = geompy.ImportBREP("my_shape_2.brep")

geompy.addToStudy(shape1, "Shape 1")
geompy.addToStudy(shape2, "Shape 2")

# perform partition
try:
    part = geompy.MakePartition([shape1, shape2])
except:
    # limit tolerance
    tolerance = 1e-07
    shape1_lt = geompy.LimitTolerance(shape1, tolerance)
    shape2_lt = geompy.LimitTolerance(shape2, tolerance)

    # process shape
    good_shape1 = geompy.ProcessShape(shape1_lt, ["FixShape"], ["FixShape.Tolerance3d"], ["1e-7"])
    good_shape2 = geompy.ProcessShape(shape2_lt, ["FixShape"], ["FixShape.Tolerance3d"], ["1e-7"])

    geompy.addToStudy(good_shape1, "Shape 1 corrected")
    geompy.addToStudy(good_shape2, "Shape 2 corrected")

    # perform partition on corrected shapes
    part = geompy.MakePartition([good_shape1, good_shape2])
    pass

geompy.addToStudy(part, "Partition")
\endcode

\anchor tui_add_point_on_edge
<br><h2>Add Point on Edge</h2>

\code
import geompy
import salome

# create vertices
p1 = geompy.MakeVertex(0,0,50)
p2 = geompy.MakeVertex(60,0,50)

# make an edge
edge = geompy.MakeEdge(p1, p2) #geompy.GetSubShape(box, edge_ind)

# divide an edge
divide = geompy.DivideEdge(edge, -1, 0.5, 0)

# add objects in the study
id_edge = geompy.addToStudy(edge, "Edge")
edge_points = geompy.SubShapeAllSortedCentres(edge, geompy.ShapeType["VERTEX"])
for point in edge_points:
    geompy.addToStudyInFather(edge, point, "Edge's point")

id_divide = geompy.addToStudy(divide, "Divided edge")
edge_points = geompy.SubShapeAllSortedCentres(divide, geompy.ShapeType["VERTEX"])
for point in edge_points:
    geompy.addToStudyInFather(divide, point, "Edge's point after divide")

salome.sg.updateObjBrowser(1) 
\endcode


*/