geompy.MakeGlueEdges( theShapes, theTolerance ), \n where \em theShapes is a list or compound of shapes to be glued, and \em theTolerance is a maximum distance between two edges, which can be considered as coincident. \n It is also possible to manually select the edges that will be glued - select the shape, specify the tolerance and press \b Detect button. \image html glue5.png \n \b Geometry module detects the edges where gluing can be performed and displays a notification. \image html glue7.png \n The edges that can be glued are colored in red. It is possible to select the edges for gluing in the 3D viewer. The selected edges will be marked in white. \n TUI Command:
geompy.GetGlueEdges( theShapes, theTolerance ), \n where \em theShape is either a list or compound of shapes to be glued, \em theTolerance is a maximum distance between two edges, which can be considered as coincident. The \b Result will be a list of \b GEOM_Objects (edges), containing one sub-shape per each detected set of coincident sub-shapes. For example, if there are two coincident edges in the selected shapes, the result list contains one of the two coincident edges. geompy.MakeGlueEdgesByList( theShapes, theTolerance, theEdges ), \n where \em theShape is a list or compound of shapes to be glued, \em theTolerance is a maximum distance between two edges, which can be considered as coincident, \em theEdges is a list of edges to be glued. \n Example: \image html glue8.png