// Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//

#ifdef WIN32
// E.A. : On windows with python 2.6, there is a conflict
// E.A. : between pymath.h and Standard_math.h which define
// E.A. : some same symbols : acosh, asinh, ...
#include <Standard_math.hxx>
#include <pymath.h>
#endif

#include <Python.h>
#include <structmember.h>

#ifdef HAVE_FINITE
#undef HAVE_FINITE
#endif

#include "GEOMImpl_ICurvesOperations.hxx"
#include "GEOMImpl_Types.hxx"

#include "GEOM_Function.hxx"
#include "GEOM_PythonDump.hxx"

#include "GEOMImpl_PolylineDriver.hxx"
#include "GEOMImpl_CircleDriver.hxx"
#include "GEOMImpl_SplineDriver.hxx"
#include "GEOMImpl_EllipseDriver.hxx"
#include "GEOMImpl_ArcDriver.hxx"
#include "GEOMImpl_ShapeDriver.hxx"
#include "GEOMImpl_SketcherDriver.hxx"
#include "GEOMImpl_3DSketcherDriver.hxx"

#include "GEOMImpl_IPolyline.hxx"
#include "GEOMImpl_IPolyline2D.hxx"
#include "GEOMImpl_ICircle.hxx"
#include "GEOMImpl_ISpline.hxx"
#include "GEOMImpl_IEllipse.hxx"
#include "GEOMImpl_IArc.hxx"
#include "GEOMImpl_ISketcher.hxx"
#include "GEOMImpl_I3DSketcher.hxx"
#include "GEOMImpl_ICurveParametric.hxx"
#include "GEOMImpl_IIsoline.hxx"
#include "GEOMImpl_PolylineDumper.hxx"

#include <Basics_OCCTVersion.hxx>

#include "utilities.h"

#include <TDF_Tool.hxx>
#include <TColStd_HArray1OfByte.hxx>
#include <TColStd_HArray1OfReal.hxx>

#include <Standard_Failure.hxx>
#include <Standard_ErrorHandler.hxx> // CAREFUL ! position of this file is critic : see Lucien PIGNOLONI / OCC


/* ==================================
 * ===========  PYTHON ==============
 * ==================================*/

typedef struct {
  PyObject_HEAD
  int softspace;
  std::string *out;
  } PyStdOut;

static void
PyStdOut_dealloc(PyStdOut *self)
{
  PyObject_Del(self);
}

static PyObject *
PyStdOut_write(PyStdOut *self, PyObject *args)
{
  char *c;
  int l;
  if (!PyArg_ParseTuple(args, "t#:write",&c, &l))
    return NULL;

  //std::cerr << c ;
  *(self->out)=*(self->out)+c;

  Py_INCREF(Py_None);
  return Py_None;
}

static PyMethodDef PyStdOut_methods[] = {
  {"write",  (PyCFunction)PyStdOut_write,  METH_VARARGS,
    PyDoc_STR("write(string) -> None")},
  {NULL,    NULL}   /* sentinel */
};

static PyMemberDef PyStdOut_memberlist[] = {
  {(char*)"softspace", T_INT,  offsetof(PyStdOut, softspace), 0,
   (char*)"flag indicating that a space needs to be printed; used by print"},
  {NULL} /* Sentinel */
};

static PyTypeObject PyStdOut_Type = {
  /* The ob_type field must be initialized in the module init function
   * to be portable to Windows without using C++. */
  PyObject_HEAD_INIT(NULL)
  0,                            /*ob_size*/
  "PyOut",                      /*tp_name*/
  sizeof(PyStdOut),             /*tp_basicsize*/
  0,                            /*tp_itemsize*/
  /* methods */
  (destructor)PyStdOut_dealloc, /*tp_dealloc*/
  0,                            /*tp_print*/
  0,                            /*tp_getattr*/
  0,                            /*tp_setattr*/
  0,                            /*tp_compare*/
  0,                            /*tp_repr*/
  0,                            /*tp_as_number*/
  0,                            /*tp_as_sequence*/
  0,                            /*tp_as_mapping*/
  0,                            /*tp_hash*/
  0,                            /*tp_call*/
  0,                            /*tp_str*/
  PyObject_GenericGetAttr,      /*tp_getattro*/
  /* softspace is writable:  we must supply tp_setattro */
  PyObject_GenericSetAttr,      /* tp_setattro */
  0,                            /*tp_as_buffer*/
  Py_TPFLAGS_DEFAULT,           /*tp_flags*/
  0,                            /*tp_doc*/
  0,                            /*tp_traverse*/
  0,                            /*tp_clear*/
  0,                            /*tp_richcompare*/
  0,                            /*tp_weaklistoffset*/
  0,                            /*tp_iter*/
  0,                            /*tp_iternext*/
  PyStdOut_methods,             /*tp_methods*/
  PyStdOut_memberlist,          /*tp_members*/
  0,                            /*tp_getset*/
  0,                            /*tp_base*/
  0,                            /*tp_dict*/
  0,                            /*tp_descr_get*/
  0,                            /*tp_descr_set*/
  0,                            /*tp_dictoffset*/
  0,                            /*tp_init*/
  0,                            /*tp_alloc*/
  0,                            /*tp_new*/
  0,                            /*tp_free*/
  0,                            /*tp_is_gc*/
};

PyObject * newPyStdOut( std::string& out )
{
  PyStdOut *self;
  self = PyObject_New(PyStdOut, &PyStdOut_Type);
  if (self == NULL)
    return NULL;
  self->softspace = 0;
  self->out=&out;
  return (PyObject*)self;
}


////////////////////////END PYTHON///////////////////////////
//=============================================================================
/*!
 *   constructor:
 */
//=============================================================================
GEOMImpl_ICurvesOperations::GEOMImpl_ICurvesOperations (GEOM_Engine* theEngine, int theDocID)
: GEOM_IOperations(theEngine, theDocID)
{
  MESSAGE("GEOMImpl_ICurvesOperations::GEOMImpl_ICurvesOperations");
}

//=============================================================================
/*!
 *  destructor
 */
//=============================================================================
GEOMImpl_ICurvesOperations::~GEOMImpl_ICurvesOperations()
{
  MESSAGE("GEOMImpl_ICurvesOperations::~GEOMImpl_ICurvesOperations");
}


//=============================================================================
/*!
 *  MakeCircleThreePnt
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeCircleThreePnt (Handle(GEOM_Object) thePnt1,
                                                                    Handle(GEOM_Object) thePnt2,
                                                                    Handle(GEOM_Object) thePnt3)
{
  SetErrorCode(KO);

  if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;

  //Add a new Circle object
  Handle(GEOM_Object) aCircle = GetEngine()->AddObject(GetDocID(), GEOM_CIRCLE);

  //Add a new Circle function for creation a circle relatively to three points
  Handle(GEOM_Function) aFunction =
    aCircle->AddFunction(GEOMImpl_CircleDriver::GetID(), CIRCLE_THREE_PNT);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_CircleDriver::GetID()) return NULL;

  GEOMImpl_ICircle aCI (aFunction);

  Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
  Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
  Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();

  if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;

  aCI.SetPoint1(aRefPnt1);
  aCI.SetPoint2(aRefPnt2);
  aCI.SetPoint3(aRefPnt3);

  //Compute the Circle value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Circle driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump(aFunction) << aCircle << " = geompy.MakeCircleThreePnt("
    << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";

  SetErrorCode(OK);
  return aCircle;
}

//=============================================================================
/*!
 *  MakeCircleCenter2Pnt
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeCircleCenter2Pnt (Handle(GEOM_Object) thePnt1,
                                                                      Handle(GEOM_Object) thePnt2,
                                                                      Handle(GEOM_Object) thePnt3)
{
  SetErrorCode(KO);

  if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;

  //Add a new Circle object
  Handle(GEOM_Object) aCircle = GetEngine()->AddObject(GetDocID(), GEOM_CIRCLE);

  //Add a new Circle function for creation a circle relatively to center and 2 points
  Handle(GEOM_Function) aFunction =
    aCircle->AddFunction(GEOMImpl_CircleDriver::GetID(), CIRCLE_CENTER_TWO_PNT);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_CircleDriver::GetID()) return NULL;

  GEOMImpl_ICircle aCI (aFunction);

  Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
  Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
  Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();

  if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;

  aCI.SetPoint1(aRefPnt1);
  aCI.SetPoint2(aRefPnt2);
  aCI.SetPoint3(aRefPnt3);

  //Compute the Circle value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Circle driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump(aFunction) << aCircle << " = geompy.MakeCircleCenter2Pnt("
    << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";

  SetErrorCode(OK);
  return aCircle;
}

//=============================================================================
/*!
 *  MakeCirclePntVecR
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeCirclePntVecR
       (Handle(GEOM_Object) thePnt, Handle(GEOM_Object) theVec, double theR)
{
  SetErrorCode(KO);

  // Not set thePnt means origin of global CS,
  // Not set theVec means Z axis of global CS
  //if (thePnt.IsNull() || theVec.IsNull()) return NULL;

  //Add a new Circle object
  Handle(GEOM_Object) aCircle = GetEngine()->AddObject(GetDocID(), GEOM_CIRCLE);

  //Add a new Circle function for creation a circle relatively to point and vector
  Handle(GEOM_Function) aFunction =
    aCircle->AddFunction(GEOMImpl_CircleDriver::GetID(), CIRCLE_PNT_VEC_R);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_CircleDriver::GetID()) return NULL;

  GEOMImpl_ICircle aCI (aFunction);

  if (!thePnt.IsNull()) {
    Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
    if (aRefPnt.IsNull()) return NULL;
    aCI.SetCenter(aRefPnt);
  }

  if (!theVec.IsNull()) {
    Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
    if (aRefVec.IsNull()) return NULL;
    aCI.SetVector(aRefVec);
  }

  aCI.SetRadius(theR);

  //Compute the Circle value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Circle driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump(aFunction) << aCircle << " = geompy.MakeCircle("
    << thePnt << ", " << theVec << ", " << theR << ")";

  SetErrorCode(OK);
  return aCircle;
}

//=============================================================================
/*!
 *  MakeEllipse
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeEllipse
                       (Handle(GEOM_Object) thePnt, Handle(GEOM_Object) theVec,
                        double theRMajor, double theRMinor,
                        Handle(GEOM_Object) theVecMaj)
{
  SetErrorCode(KO);

  // Not set thePnt means origin of global CS,
  // Not set theVec means Z axis of global CS
  // Not set theVecMaj means X axis of global CS
  //if (thePnt.IsNull() || theVec.IsNull()) return NULL;

  //Add a new Ellipse object
  Handle(GEOM_Object) anEll = GetEngine()->AddObject(GetDocID(), GEOM_ELLIPSE);

  //Add a new Ellipse function
  Handle(GEOM_Function) aFunction =
    anEll->AddFunction(GEOMImpl_EllipseDriver::GetID(), ELLIPSE_PNT_VEC_RR);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_EllipseDriver::GetID()) return NULL;

  GEOMImpl_IEllipse aCI (aFunction);

  if (!thePnt.IsNull()) {
    Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
    if (aRefPnt.IsNull()) return NULL;
    aCI.SetCenter(aRefPnt);
  }

  if (!theVec.IsNull()) {
    Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
    if (aRefVec.IsNull()) return NULL;
    aCI.SetVector(aRefVec);
  }

  aCI.SetRMajor(theRMajor);
  aCI.SetRMinor(theRMinor);

  if (!theVecMaj.IsNull()) {
    Handle(GEOM_Function) aRefVecMaj = theVecMaj->GetLastFunction();
    if (aRefVecMaj.IsNull()) return NULL;
    aCI.SetVectorMajor(aRefVecMaj);
  }

  //Compute the Ellipse value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Ellipse driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  if (!theVecMaj.IsNull()) {
    GEOM::TPythonDump(aFunction) << anEll << " = geompy.MakeEllipse("
                                 << thePnt << ", " << theVec << ", " << theRMajor << ", " << theRMinor
                                 << ", " << theVecMaj << ")";
  }
  else {
    GEOM::TPythonDump(aFunction) << anEll << " = geompy.MakeEllipse("
                                 << thePnt << ", " << theVec << ", " << theRMajor << ", " << theRMinor << ")";
  }

  SetErrorCode(OK);
  return anEll;
}

//=============================================================================
/*!
 *  MakeArc
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeArc (Handle(GEOM_Object) thePnt1,
                                                         Handle(GEOM_Object) thePnt2,
                                                         Handle(GEOM_Object) thePnt3)
{
  SetErrorCode(KO);

  if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;

  //Add a new Circle Arc object
  Handle(GEOM_Object) anArc = GetEngine()->AddObject(GetDocID(), GEOM_CIRC_ARC);

  //Add a new Circle Arc function
  Handle(GEOM_Function) aFunction =
      anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), CIRC_ARC_THREE_PNT);

  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_ArcDriver::GetID()) return NULL;
  GEOMImpl_IArc aCI (aFunction);

  Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
  Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
  Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();

  if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;

  aCI.SetPoint1(aRefPnt1);
  aCI.SetPoint2(aRefPnt2);
  aCI.SetPoint3(aRefPnt3);

  //Compute the Arc value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Arc driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump(aFunction) << anArc << " = geompy.MakeArc("
    << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";

  SetErrorCode(OK);
  return anArc;
}

//=============================================================================
/*!
 *  MakeArcCenter
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeArcCenter (Handle(GEOM_Object) thePnt1,
                                                               Handle(GEOM_Object) thePnt2,
                                                               Handle(GEOM_Object) thePnt3,
                                                               bool                theSense)
{
  SetErrorCode(KO);
  if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;

  //Add a new Circle Arc object
  Handle(GEOM_Object) anArc = GetEngine()->AddObject(GetDocID(), GEOM_CIRC_ARC);

  //Add a new Circle Arc function
  Handle(GEOM_Function) aFunction =
      anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), CIRC_ARC_CENTER);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_ArcDriver::GetID()) return NULL;

  GEOMImpl_IArc aCI (aFunction);

  Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
  Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
  Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();

  if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;

  aCI.SetPoint1(aRefPnt1);
  aCI.SetPoint2(aRefPnt2);
  aCI.SetPoint3(aRefPnt3);
  aCI.SetSense(theSense);

  //Compute the Arc value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Arc driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }
  //Make a Python command
  GEOM::TPythonDump(aFunction) << anArc << " = geompy.MakeArcCenter("
      << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << "," << theSense << ")";

  SetErrorCode(OK);
  return anArc;
}

//=============================================================================
/*!
 *  MakeArcOfEllipse
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeArcOfEllipse (Handle(GEOM_Object) thePnt1,
                                                                  Handle(GEOM_Object) thePnt2,
                                                                  Handle(GEOM_Object) thePnt3)
{
  SetErrorCode(KO);

  if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;

  //Add a new Circle Arc object
  Handle(GEOM_Object) anArc = GetEngine()->AddObject(GetDocID(), GEOM_ELLIPSE_ARC);

  //Add a new Circle Arc function
  Handle(GEOM_Function) aFunction =
      anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), ELLIPSE_ARC_CENTER_TWO_PNT);

  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_ArcDriver::GetID()) return NULL;
  GEOMImpl_IArc aCI (aFunction);

  Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
  Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
  Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();

  if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;

  aCI.SetPoint1(aRefPnt1);
  aCI.SetPoint2(aRefPnt2);
  aCI.SetPoint3(aRefPnt3);

  //Compute the Arc value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Arc driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump(aFunction) << anArc << " = geompy.MakeArcOfEllipse("
    << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";

  SetErrorCode(OK);
  return anArc;
}

//=============================================================================
/*!
 *  MakePolyline
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakePolyline (std::list<Handle(GEOM_Object)> thePoints,
                                                              bool theIsClosed)
{
  SetErrorCode(KO);

  //Add a new Polyline object
  Handle(GEOM_Object) aPolyline = GetEngine()->AddObject(GetDocID(), GEOM_POLYLINE);

  //Add a new Polyline function for creation a polyline relatively to points set
  Handle(GEOM_Function) aFunction =
    aPolyline->AddFunction(GEOMImpl_PolylineDriver::GetID(), POLYLINE_POINTS);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_PolylineDriver::GetID()) return NULL;

  GEOMImpl_IPolyline aCI (aFunction);

  int aLen = thePoints.size();
  aCI.SetLength(aLen);
  aCI.SetConstructorType(POINT_CONSTRUCTOR);

  int ind = 1;
  std::list<Handle(GEOM_Object)>::iterator it = thePoints.begin();
  for (; it != thePoints.end(); it++, ind++) {
    Handle(GEOM_Function) aRefPnt = (*it)->GetLastFunction();
    if (aRefPnt.IsNull()) {
      SetErrorCode("NULL point for Polyline");
      return NULL;
    }
    aCI.SetPoint(ind, aRefPnt);
  }

  aCI.SetIsClosed(theIsClosed);

  //Compute the Polyline value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Polyline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aPolyline << " = geompy.MakePolyline([";

  it = thePoints.begin();
  pd << (*it++);
  while (it != thePoints.end()) {
    pd << ", " << (*it++);
  }
  pd << "], " << theIsClosed << ")";

  SetErrorCode(OK);
  return aPolyline;
}

//=============================================================================
/*!
 *  MakeSplineBezier
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSplineBezier
                                          (std::list<Handle(GEOM_Object)> thePoints,
                                           bool theIsClosed)
{
  SetErrorCode(KO);

  //Add a new Spline object
  Handle(GEOM_Object) aSpline = GetEngine()->AddObject(GetDocID(), GEOM_SPLINE);

  //Add a new Spline function for creation a bezier curve relatively to points set
  Handle(GEOM_Function) aFunction =
    aSpline->AddFunction(GEOMImpl_SplineDriver::GetID(), SPLINE_BEZIER);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_SplineDriver::GetID()) return NULL;

  GEOMImpl_ISpline aCI (aFunction);

  aCI.SetConstructorType(POINT_CONSTRUCTOR);

  Handle(TColStd_HSequenceOfTransient) aPoints = new TColStd_HSequenceOfTransient;
  std::list<Handle(GEOM_Object)>::iterator it = thePoints.begin();
  for (; it != thePoints.end(); it++) {
    Handle(GEOM_Function) aRefPnt = (*it)->GetLastFunction();
    if (aRefPnt.IsNull()) {
      SetErrorCode("NULL point for Besier curve");
      return NULL;
    }
    aPoints->Append(aRefPnt);
  }
  aCI.SetPoints(aPoints);

  aCI.SetIsClosed(theIsClosed);

  //Compute the Spline value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Spline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aSpline << " = geompy.MakeBezier([";

  it = thePoints.begin();
  pd << (*it++);
  while (it != thePoints.end()) {
    pd << ", " << (*it++);
  }
  pd << "], " << theIsClosed << ")";

  SetErrorCode(OK);
  return aSpline;
}

//=============================================================================
/*!
 *  MakeSplineInterpolation
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSplineInterpolation
                                          (std::list<Handle(GEOM_Object)> thePoints,
                                           bool theIsClosed,
                                           bool theDoReordering)
{
  SetErrorCode(KO);

  //Add a new Spline object
  Handle(GEOM_Object) aSpline = GetEngine()->AddObject(GetDocID(), GEOM_SPLINE);

  //Add a new Spline function for interpolation type
  Handle(GEOM_Function) aFunction =
    aSpline->AddFunction(GEOMImpl_SplineDriver::GetID(), SPLINE_INTERPOLATION);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_SplineDriver::GetID()) return NULL;

  GEOMImpl_ISpline aCI (aFunction);

  aCI.SetConstructorType(POINT_CONSTRUCTOR);

  Handle(TColStd_HSequenceOfTransient) aPoints = new TColStd_HSequenceOfTransient;
  std::list<Handle(GEOM_Object)>::iterator it = thePoints.begin();
  for (; it != thePoints.end(); it++) {
    Handle(GEOM_Function) aRefPnt = (*it)->GetLastFunction();
    if (aRefPnt.IsNull()) {
      return NULL;
    }
    aPoints->Append(aRefPnt);
  }
  aCI.SetPoints(aPoints);

  aCI.SetIsClosed(theIsClosed);
  aCI.SetDoReordering(theDoReordering);

  //Compute the Spline value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Spline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aSpline << " = geompy.MakeInterpol([";

  it = thePoints.begin();
  pd << (*it++);
  while (it != thePoints.end()) {
    pd << ", " << (*it++);
  }
  pd << "], " << theIsClosed << ", " << theDoReordering << ")";

  SetErrorCode(OK);
  return aSpline;
}


//=============================================================================
/*!
 *  MakeSplineInterpolWithTangents
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSplineInterpolWithTangents
                                          (std::list<Handle(GEOM_Object)> thePoints,
                                           Handle(GEOM_Object) theFirstVec,
                                           Handle(GEOM_Object) theLastVec)
{
  SetErrorCode(KO);

  //Add a new Spline object
  Handle(GEOM_Object) aSpline = GetEngine()->AddObject(GetDocID(), GEOM_SPLINE);

  //Add a new Spline function for interpolation type
  Handle(GEOM_Function) aFunction =
    aSpline->AddFunction(GEOMImpl_SplineDriver::GetID(), SPLINE_INTERPOL_TANGENTS);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_SplineDriver::GetID()) return NULL;

  GEOMImpl_ISpline aCI (aFunction);

  aCI.SetConstructorType(POINT_CONSTRUCTOR);

  Handle(TColStd_HSequenceOfTransient) aPoints = new TColStd_HSequenceOfTransient;
  std::list<Handle(GEOM_Object)>::iterator it = thePoints.begin();
  for (; it != thePoints.end(); it++) {
    Handle(GEOM_Function) aRefPnt = (*it)->GetLastFunction();
    if (aRefPnt.IsNull()) {
      SetErrorCode("NULL point for Interpolation");
      return NULL;
    }
    aPoints->Append(aRefPnt);
  }
  aCI.SetPoints(aPoints);

  Handle(GEOM_Function) aVec1 = theFirstVec->GetLastFunction();
  Handle(GEOM_Function) aVec2 = theLastVec->GetLastFunction();

  if (aVec1.IsNull() || aVec2.IsNull()) return NULL;

  aCI.SetFirstVector(aVec1);
  aCI.SetLastVector(aVec2);

  //Compute the Spline value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Spline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aSpline << " = geompy.MakeInterpolWithTangents([";

  it = thePoints.begin();
  pd << (*it++);
  while (it != thePoints.end()) {
    pd << ", " << (*it++);
  }
  pd << "], " << theFirstVec << ", " << theLastVec << ")";

  SetErrorCode(OK);
  return aSpline;
}

//=============================================================================
/*!
 *  MakeCurveParametric
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeCurveParametric
             (const char* thexExpr, const char* theyExpr, const char* thezExpr,
              double theParamMin, double theParamMax, double theParamStep,
              CurveType theCurveType,
              int theParamNbStep, bool theNewMethod)
{
  TCollection_AsciiString aPyScript;
  aPyScript +="from math import *                                          \n";
  aPyScript +="def X(t):                                                   \n";
  aPyScript +="    return ";
  aPyScript += thexExpr;
  aPyScript += "\n";
  aPyScript +="def Y(t):                                                   \n";
  aPyScript +="    return ";
  aPyScript += theyExpr;
  aPyScript += "\n";

  aPyScript +="def Z(t):                                                   \n";
  aPyScript +="    return ";
  aPyScript += thezExpr;
  aPyScript += "\n";

  if (theNewMethod)
  {
    aPyScript +="def coordCalculator(tmin, tmax, nstep):                     \n";
    aPyScript +="   coords = []                                              \n";
    aPyScript +="   tstep  = (tmax - tmin) / nstep                           \n";
    aPyScript +="   n = 0                                                    \n";
    aPyScript +="   while n <= nstep :                                       \n";
    aPyScript +="      t = tmin + n*tstep                                    \n";
    aPyScript +="      coords.append([X(t), Y(t), Z(t)])                     \n";
    aPyScript +="      n = n+1                                               \n";
    aPyScript +="   return coords                                            \n";
  }
  else
  {
    aPyScript +="def coordCalculator(tmin, tmax, tstep):                      \n";
    aPyScript +="   coords = []                                              \n";
    aPyScript +="   while tmin <= tmax :                                     \n";
    aPyScript +="      coords.append([X(tmin), Y(tmin), Z(tmin)])            \n";
    aPyScript +="      tmin = tmin + tstep                                   \n";
    aPyScript +="   return coords                                            \n";
  }

  SetErrorCode(KO);

  if(theParamMin >= theParamMax) {
    SetErrorCode("The minimum value of the parameter must be less than maximum value !!!");
    return NULL;
  }

  if(!theNewMethod && theParamStep <= 0.0) {
    SetErrorCode("Value of the step must be positive !!!");
    return NULL;
  }
  else if(theNewMethod && theParamNbStep < 0) {
    SetErrorCode("The number of steps must be positive !!!");
    return NULL;
  }

  /* Initialize the Python interpreter */
  if (! Py_IsInitialized()) {
    SetErrorCode("Python interpreter is not initialized !!! ");
    return NULL;
  }

  PyGILState_STATE gstate;
  gstate = PyGILState_Ensure();

  PyObject* main_mod = PyImport_AddModule("__main__");
  PyObject* main_dict = PyModule_GetDict(main_mod);

  PyObject* obj = PyRun_String(aPyScript.ToCString(), Py_file_input, main_dict, NULL);

  if (obj == NULL) {
    SetErrorCode("Error during executing of python script !!!");
    PyErr_Print();
    PyGILState_Release(gstate);
    return NULL;
  } else {
    Py_DECREF(obj);
  }

  PyObject * func = NULL;
  func = PyObject_GetAttrString(main_mod, "coordCalculator");

  if (func == NULL){
    SetErrorCode("Can't get function from python module !!!");
    PyGILState_Release(gstate);
    return NULL;
  }

  PyObject* coords;
  if (theNewMethod)
    coords = PyObject_CallFunction(func,(char*)"(d, d, i)", theParamMin, theParamMax, theParamNbStep );
  else
    coords = PyObject_CallFunction(func,(char*)"(d, d, d)", theParamMin, theParamMax, theParamStep );

  PyObject* new_stderr = NULL;

  if (coords == NULL){
    fflush(stderr);
    std::string err_description="";
    new_stderr = newPyStdOut(err_description);
    PySys_SetObject((char*)"stderr", new_stderr);
    PyErr_Print();
    PySys_SetObject((char*)"stderr", PySys_GetObject((char*)"__stderr__"));
    Py_DECREF(new_stderr);
    MESSAGE("Can't evaluate coordCalculator()" << " error is " << err_description);
    SetErrorCode("Can't evaluate the expressions, please check them !!!");
    PyGILState_Release(gstate);
    return NULL;
  }

  int lsize = PyList_Size( coords );

  if(lsize <= 0) {
    SetErrorCode("Empty list of the points, please check input parameters !!!");
    return NULL;
  }

  Handle(TColStd_HArray1OfReal) aCoordsArray = new TColStd_HArray1OfReal (1, lsize * 3);

  int k=1;
  for ( Py_ssize_t i = 0; i < lsize; ++i ) {
    PyObject* coord = PyList_GetItem( coords, i );
    if (coord != NULL) {
      for ( Py_ssize_t j = 0; j < PyList_Size(coord); ++j) {
        PyObject* item = PyList_GetItem(coord, j);
        aCoordsArray->SetValue(k, PyFloat_AsDouble(item));
        k++;
      }
    }
  }

  Py_DECREF(coords);

  PyGILState_Release(gstate);

  Handle(GEOM_Object) aCurve;
  Handle(GEOM_Function) aFunction;
  TCollection_AsciiString aCurveType;

  switch(theCurveType) {
  case Polyline: {
    //Add a new Polyline object
    aCurve = GetEngine()->AddObject(GetDocID(), GEOM_POLYLINE);

    //Add a new Polyline function for creation a polyline relatively to points set
    aFunction = aCurve->AddFunction(GEOMImpl_PolylineDriver::GetID(), POLYLINE_POINTS);
    if (aFunction.IsNull()) return NULL;

    //Check if the function is set correctly
    if (aFunction->GetDriverGUID() != GEOMImpl_PolylineDriver::GetID()) return NULL;

    GEOMImpl_IPolyline aCI (aFunction);

    aCI.SetLength(lsize);
    aCI.SetConstructorType(COORD_CONSTRUCTOR);
    aCI.SetIsClosed(false);
    aCI.SetCoordinates(aCoordsArray);
    aCurveType = "GEOM.Polyline";
    break;
  }
  case Bezier: {
    //Add a new Spline object
    aCurve = GetEngine()->AddObject(GetDocID(), GEOM_SPLINE);
    //Add a new Spline function for creation a bezier curve relatively to points set
    aFunction =
      aCurve->AddFunction(GEOMImpl_SplineDriver::GetID(), SPLINE_BEZIER);
    if (aFunction.IsNull()) return NULL;

    //Check if the function is set correctly
    if (aFunction->GetDriverGUID() != GEOMImpl_SplineDriver::GetID()) return NULL;

    GEOMImpl_ISpline aCI (aFunction);

    aCI.SetConstructorType(COORD_CONSTRUCTOR);
    aCI.SetIsClosed(false);
    aCI.SetCoordinates(aCoordsArray);
    aCurveType = "GEOM.Bezier";
    break;
  }
  case Interpolation: {
    //Add a new Spline object
    aCurve = GetEngine()->AddObject(GetDocID(), GEOM_SPLINE);

    //Add a new Spline function for creation a bezier curve relatively to points set
    aFunction = aCurve->AddFunction(GEOMImpl_SplineDriver::GetID(), SPLINE_INTERPOLATION);
    if (aFunction.IsNull()) return NULL;

    //Check if the function is set correctly
    if (aFunction->GetDriverGUID() != GEOMImpl_SplineDriver::GetID()) return NULL;

    GEOMImpl_ISpline aCI (aFunction);
    aCI.SetConstructorType(COORD_CONSTRUCTOR);
    aCI.SetIsClosed(false);
    aCI.SetDoReordering(false);
    aCI.SetCoordinates(aCoordsArray);
    aCurveType = "GEOM.Interpolation";
    break;
  }
  }

  GEOMImpl_ICurveParametric aIP(aFunction);
  aIP.SetExprX      (thexExpr);
  aIP.SetExprY      (theyExpr);
  aIP.SetExprZ      (thezExpr);
  aIP.SetParamMin   (theParamMin);
  aIP.SetParamMax   (theParamMax);
  if ( theNewMethod )
    aIP.SetParamNbStep(theParamNbStep);
  else
    aIP.SetParamStep  (theParamStep);

  //Compute the Curve value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Curve driver failed !!!");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aCurve << " = geompy.MakeCurveParametric(";
  pd << "\"" << thexExpr << "\", ";
  pd << "\"" << theyExpr << "\", ";
  pd << "\"" << thezExpr << "\", ";

  pd << theParamMin <<", ";
  pd << theParamMax <<", ";
  if (theNewMethod)
    pd << theParamNbStep <<", ";
  else
    pd << theParamStep <<", ";
  pd << aCurveType.ToCString() <<", ";
  pd << theNewMethod <<")";

  SetErrorCode(OK);
  return aCurve;
}

//=============================================================================
/*!
 *  MakeSketcher
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSketcher (const char* theCommand,
                                                              std::list<double> theWorkingPlane)
{
  SetErrorCode(KO);

  if (!theCommand || strcmp(theCommand, "") == 0) return NULL;

  //Add a new Sketcher object
  Handle(GEOM_Object) aSketcher = GetEngine()->AddObject(GetDocID(), GEOM_SKETCHER);

  //Add a new Sketcher function
  Handle(GEOM_Function) aFunction =
    aSketcher->AddFunction(GEOMImpl_SketcherDriver::GetID(), SKETCHER_NINE_DOUBLS);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_SketcherDriver::GetID()) return NULL;

  GEOMImpl_ISketcher aCI (aFunction);

  TCollection_AsciiString aCommand((char*) theCommand);
  aCI.SetCommand(aCommand);

  int ind = 1;
  std::list<double>::iterator it = theWorkingPlane.begin();
  for (; it != theWorkingPlane.end(); it++, ind++)
    aCI.SetWorkingPlane(ind, *it);

  //Compute the Sketcher value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Sketcher driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aSketcher << " = geompy.MakeSketcher(\"" << aCommand.ToCString() << "\", [";

  it = theWorkingPlane.begin();
  pd << (*it++);
  while (it != theWorkingPlane.end()) {
    pd << ", " << (*it++);
  }
  pd << "])";

  SetErrorCode(OK);
  return aSketcher;
}

//=============================================================================
/*!
 *  MakeSketcherOnPlane
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSketcherOnPlane
                               (const char* theCommand,
                                Handle(GEOM_Object)            theWorkingPlane)
{
  SetErrorCode(KO);

  if (!theCommand || strcmp(theCommand, "") == 0) return NULL;

  //Add a new Sketcher object
  Handle(GEOM_Object) aSketcher = GetEngine()->AddObject(GetDocID(), GEOM_SKETCHER);

  //Add a new Sketcher function
  Handle(GEOM_Function) aFunction =
    aSketcher->AddFunction(GEOMImpl_SketcherDriver::GetID(), SKETCHER_PLANE);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_SketcherDriver::GetID()) return NULL;

  GEOMImpl_ISketcher aCI (aFunction);

  TCollection_AsciiString aCommand((char*) theCommand);
  aCI.SetCommand(aCommand);

  Handle(GEOM_Function) aRefPlane = theWorkingPlane->GetLastFunction();
  if (aRefPlane.IsNull()) return NULL;
  aCI.SetWorkingPlane( aRefPlane );

  //Compute the Sketcher value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Sketcher driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump (aFunction) << aSketcher << " = geompy.MakeSketcherOnPlane(\""
    << aCommand.ToCString() << "\", " << theWorkingPlane << " )";

  SetErrorCode(OK);
  return aSketcher;
}

//=============================================================================
/*!
 *  Make3DSketcherCommand
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::Make3DSketcherCommand (const char* theCommand)
{
  SetErrorCode(KO);

  if (!theCommand || strcmp(theCommand, "") == 0) return NULL;

  //Add a new Sketcher object
  Handle(GEOM_Object) aSketcher = GetEngine()->AddObject(GetDocID(), GEOM_3DSKETCHER);

  //Add a new Sketcher function
  Handle(GEOM_Function) aFunction =
    aSketcher->AddFunction(GEOMImpl_3DSketcherDriver::GetID(), SKETCHER3D_COMMAND);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_3DSketcherDriver::GetID()) return NULL;

  GEOMImpl_I3DSketcher aCI (aFunction);

  TCollection_AsciiString aCommand ((char*) theCommand);
  aCI.SetCommand(aCommand);

  //Compute the 3D Sketcher value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("3D Sketcher driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << aSketcher << " = geompy.Make3DSketcherCommand(\"" << aCommand.ToCString() << "\")";

  SetErrorCode(OK);
  return aSketcher;
}

//=============================================================================
/*!
 *  Make3DSketcher
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::Make3DSketcher (std::list<double> theCoordinates)
{
  SetErrorCode(KO);

  //Add a new Sketcher object
  Handle(GEOM_Object) a3DSketcher = GetEngine()->AddObject(GetDocID(), GEOM_3DSKETCHER);

  //Add a new Sketcher function
  Handle(GEOM_Function) aFunction =
    a3DSketcher->AddFunction(GEOMImpl_3DSketcherDriver::GetID(), SKETCHER3D_COORDS);
  if (aFunction.IsNull()) return NULL;

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_3DSketcherDriver::GetID()) return NULL;

  GEOMImpl_I3DSketcher aCI (aFunction);

  int nbOfCoords = 0;
  std::list<double>::iterator it = theCoordinates.begin();
  for (; it != theCoordinates.end(); it++)
    nbOfCoords++;

  Handle(TColStd_HArray1OfReal) aCoordsArray = new TColStd_HArray1OfReal (1, nbOfCoords);

  it = theCoordinates.begin();
  int ind = 1;
  for (; it != theCoordinates.end(); it++, ind++)
    aCoordsArray->SetValue(ind, *it);

  aCI.SetCoordinates(aCoordsArray);

  //Compute the Sketcher value
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("3D Sketcher driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump pd (aFunction);
  pd << a3DSketcher << " = geompy.Make3DSketcher([";

  it = theCoordinates.begin();
  pd << (*it++);
  while (it != theCoordinates.end()) {
    pd << ", " << (*it++);
  }
  pd << "])";

  SetErrorCode(OK);
  return a3DSketcher;
}

//=============================================================================
/*!
 *  MakeIsoline
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeIsoline
                  (const Handle(GEOM_Object) &theFace,
                   const bool                 IsUIso,
                   const double               theParameter)
{
  SetErrorCode(KO);

  if (theFace.IsNull()) {
    return NULL;
  }

  //Add a new Spline object
  Handle(GEOM_Object) anIsoline =
    GetEngine()->AddObject(GetDocID(), GEOM_ISOLINE);

  //Add a new Spline function for interpolation type
  Handle(GEOM_Function) aFunction =
    anIsoline->AddFunction(GEOMImpl_ShapeDriver::GetID(), SHAPE_ISOLINE);

  if (aFunction.IsNull()) {
    return NULL;
  }

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_ShapeDriver::GetID()) {
    return NULL;
  }

  GEOMImpl_IIsoline     aCI (aFunction);
  Handle(GEOM_Function) aRefFace = theFace->GetLastFunction();

  if (aRefFace.IsNull()) {
    return NULL;
  }

  aCI.SetFace(aRefFace);
  aCI.SetIsUIso(IsUIso);
  aCI.SetParameter(theParameter);

  //Compute the isoline curve
  try {
    OCC_CATCH_SIGNALS;
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Shape driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOM::TPythonDump (aFunction) << anIsoline << " = geompy.MakeIsoline( "
    << theFace << ", " << IsUIso << ", " << theParameter << " )";

  SetErrorCode(OK);
  return anIsoline;
}

//=============================================================================
/*!
 *  MakePolyline2D
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakePolyline2D
            (const std::list <std::list <double> >         &theCoords,
             const Handle(TColStd_HArray1OfExtendedString) &theNames,
             const Handle(TColStd_HArray1OfByte)           &theTypes,
             const Handle(TColStd_HArray1OfByte)           &theCloseds,
             const Handle(TColStd_HArray1OfReal)           &theWorkingPlane)
{
  SetErrorCode(KO);

  if (theCoords.empty()   || theNames.IsNull() || theTypes.IsNull() ||
      theCloseds.IsNull() || theWorkingPlane.IsNull()) {
    return NULL;
  }

  // Add a new Polyline object
  Handle(GEOM_Object)   aResult   =
    GetEngine()->AddObject(GetDocID(), GEOM_POLYLINE2D);
  Handle(GEOM_Function) aFunction = aResult->AddFunction
    (GEOMImpl_PolylineDriver::GetID(), POLYLINE2D_PLN_COORDS);

  if (aFunction.IsNull()) {
    return NULL;
  }

  // Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_PolylineDriver::GetID()) {
    return NULL;
  }

  GEOMImpl_IPolyline2D aCI(aFunction);

  aCI.SetCoords(theCoords);
  aCI.SetNames(theNames);
  aCI.SetTypes(theTypes);
  aCI.SetClosedFlags(theCloseds);
  aCI.SetWorkingPlaneDbls(theWorkingPlane);

  // Compute the isoline curve
  try {
#if OCC_VERSION_LARGE > 0x06010000
    OCC_CATCH_SIGNALS;
#endif
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Polyline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOMImpl_PolylineDumper aDumper(theCoords, theNames, theTypes,
                                  theCloseds, theWorkingPlane);

  aDumper.Dump(aResult);

  if (aDumper.IsDone() == Standard_False) {
    SetErrorCode("Python dump failed");
    return NULL;
  }

  SetErrorCode(OK);
  return aResult;
}

//=============================================================================
/*!
 *  MakePolyline2DOnPlane
 */
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakePolyline2DOnPlane
            (const std::list <std::list <double> >         &theCoords,
             const Handle(TColStd_HArray1OfExtendedString) &theNames,
             const Handle(TColStd_HArray1OfByte)           &theTypes,
             const Handle(TColStd_HArray1OfByte)           &theCloseds,
             const Handle(GEOM_Object)                     &theWorkingPlane)
{
  SetErrorCode(KO);

  if (theCoords.empty()   || theNames.IsNull() || theTypes.IsNull() ||
      theCloseds.IsNull() || theWorkingPlane.IsNull()) {
    return NULL;
  }

  //Add a new Polyline object
  Handle(GEOM_Object) aResult =
    GetEngine()->AddObject(GetDocID(), GEOM_POLYLINE2D);
  Handle(GEOM_Function) aFunction = aResult->AddFunction
    (GEOMImpl_PolylineDriver::GetID(), POLYLINE2D_PLN_OBJECT);

  if (aFunction.IsNull()) {
    return NULL;
  }

  //Check if the function is set correctly
  if (aFunction->GetDriverGUID() != GEOMImpl_PolylineDriver::GetID()) {
    return NULL;
  }

  Handle(GEOM_Function) aRefPlane = theWorkingPlane->GetLastFunction();

  if (aRefPlane.IsNull()) {
    return NULL;
  }

  GEOMImpl_IPolyline2D aCI(aFunction);

  aCI.SetCoords(theCoords);
  aCI.SetNames(theNames);
  aCI.SetTypes(theTypes);
  aCI.SetClosedFlags(theCloseds);
  aCI.SetWorkingPlane(aRefPlane);

  //Compute the isoline curve
  try {
#if OCC_VERSION_LARGE > 0x06010000
    OCC_CATCH_SIGNALS;
#endif
    if (!GetSolver()->ComputeFunction(aFunction)) {
      SetErrorCode("Polyline driver failed");
      return NULL;
    }
  }
  catch (Standard_Failure) {
    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
    SetErrorCode(aFail->GetMessageString());
    return NULL;
  }

  //Make a Python command
  GEOMImpl_PolylineDumper aDumper(theCoords, theNames, theTypes,
                                  theCloseds, theWorkingPlane);

  aDumper.Dump(aResult);

  if (aDumper.IsDone() == Standard_False) {
    SetErrorCode("Python dump failed");
    return NULL;
  }

  SetErrorCode(OK);
  return aResult;
}