mirror of
https://git.salome-platform.org/gitpub/modules/geom.git
synced 2024-12-26 17:30:35 +05:00
38 lines
1.1 KiB
Python
38 lines
1.1 KiB
Python
# Limit Tolerance
|
|
|
|
import salome
|
|
salome.salome_init()
|
|
import GEOM
|
|
from salome.geom import geomBuilder
|
|
geompy = geomBuilder.New()
|
|
gg = salome.ImportComponentGUI("GEOM")
|
|
|
|
# import initial topology with bad tolerances (more than 1e-07)
|
|
shape1 = geompy.ImportBREP("my_shape_1.brep")
|
|
shape2 = geompy.ImportBREP("my_shape_2.brep")
|
|
|
|
geompy.addToStudy(shape1, "Shape 1")
|
|
geompy.addToStudy(shape2, "Shape 2")
|
|
|
|
# perform partition
|
|
try:
|
|
part = geompy.MakePartition([shape1, shape2])
|
|
except:
|
|
# limit tolerance
|
|
tolerance = 1e-07
|
|
shape1_lt = geompy.LimitTolerance(shape1, tolerance)
|
|
shape2_lt = geompy.LimitTolerance(shape2, tolerance)
|
|
|
|
# process shape
|
|
good_shape1 = geompy.ProcessShape(shape1_lt, ["FixShape"], ["FixShape.Tolerance3d"], ["1e-7"])
|
|
good_shape2 = geompy.ProcessShape(shape2_lt, ["FixShape"], ["FixShape.Tolerance3d"], ["1e-7"])
|
|
|
|
geompy.addToStudy(good_shape1, "Shape 1 corrected")
|
|
geompy.addToStudy(good_shape2, "Shape 2 corrected")
|
|
|
|
# perform partition on corrected shapes
|
|
part = geompy.MakePartition([good_shape1, good_shape2])
|
|
pass
|
|
|
|
geompy.addToStudy(part, "Partition")
|