mirror of
https://git.salome-platform.org/gitpub/modules/geom.git
synced 2024-11-15 18:18:35 +05:00
370 lines
8.8 KiB
Plaintext
370 lines
8.8 KiB
Plaintext
/*!
|
|
|
|
\page tui_measurement_tools_page Measurement Tools
|
|
|
|
<br><h2>Point Coordinates</h2>
|
|
|
|
\code
|
|
import math
|
|
import geompy
|
|
|
|
# create a point
|
|
point = geompy.MakeVertex(15., 23., 80.)
|
|
|
|
# get the coordinates of the point and check its values
|
|
coords = geompy.PointCoordinates(point)
|
|
|
|
# check the obtained coordinate values
|
|
tolerance = 1.e-07
|
|
def IsEqual(val1, val2): return (math.fabs(val1 - val2) < tolerance)
|
|
|
|
if IsEqual(coords[0], 15.) and IsEqual(coords[1], 23.) and IsEqual(coords[2], 80.):
|
|
print "All values are OK."
|
|
else :
|
|
print "Coordinates of point must be (15, 23, 80), but returned (",
|
|
print coords[0], ", ", coords[1], ", ", coords[2], ")"
|
|
pass
|
|
\endcode
|
|
|
|
<br><h2>Basic Properties</h2>
|
|
|
|
\code
|
|
import geompy
|
|
import math
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
props = geompy.BasicProperties(box)
|
|
print "\nBox 100x30x100 Basic Properties:"
|
|
print " Wires length: ", props[0]
|
|
print " Surface area: ", props[1]
|
|
print " Volume : ", props[2]
|
|
length = math.sqrt((props[0] - 1840)*(props[0] - 1840))
|
|
area = math.sqrt((props[1] - 32000)*(props[1] - 32000))
|
|
volume = math.sqrt((props[2] - 300000)*(props[2] - 300000))
|
|
if length > 1e-7 or area > 1e-7 or volume > 1e-7:
|
|
print "While must be:"
|
|
print " Wires length: ", 1840
|
|
print " Surface area: ", 32000
|
|
print " Volume : ", 300000.
|
|
\endcode
|
|
|
|
<br><h2>Center of masses</h2>
|
|
|
|
\code
|
|
import geompy
|
|
import math
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
cm = geompy.MakeCDG(box)
|
|
if cm is None:
|
|
raise RuntimeError, "MakeCDG(box) failed"
|
|
else:
|
|
print "\nCentre of gravity of box has been successfully obtained:"
|
|
coords = geompy.PointCoordinates(cm)
|
|
print "(", coords[0], ", ", coords[1], ", ", coords[2], ")"
|
|
dx = math.sqrt((coords[0] - 50)*(coords[0] - 50))
|
|
dy = math.sqrt((coords[1] - 15)*(coords[1] - 15))
|
|
dz = math.sqrt((coords[2] - 50)*(coords[2] - 50))
|
|
if dx > 1e-7 or dy > 1e-7 or dz > 1e-7:
|
|
print "But must be (50, 15, 50)"
|
|
\endcode
|
|
|
|
<br><h2>Inertia</h2>
|
|
|
|
\code
|
|
import geompy
|
|
import math
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
In = geompy.Inertia(box)
|
|
print "\nInertia matrix of box 100x30x100:"
|
|
print " (", In[0], ", ", In[1], ", ", In[2], ")"
|
|
print " (", In[3], ", ", In[4], ", ", In[5], ")"
|
|
print " (", In[6], ", ", In[7], ", ", In[8], ")"
|
|
print "Main moments of inertia of box 100x30x100:"
|
|
print " Ix = ", In[9], ", Iy = ", In[10], ", Iz = ", In[11]
|
|
\endcode
|
|
|
|
<br><h2>Check Free Boundaries</h2>
|
|
|
|
\code
|
|
import os
|
|
import geompy
|
|
import salome
|
|
gg = salome.ImportComponentGUI("GEOM")
|
|
|
|
# create boxes
|
|
box1 = geompy.MakeBox(0,0,0,100,50,100)
|
|
box2 = geompy.MakeBox(100,0,0,250,50,100)
|
|
|
|
# make a compound
|
|
compound = geompy.MakeCompound([box1, box2])
|
|
|
|
# import from *.brep
|
|
ImportFromBREP = geompy.ImportBREP(os.getenv("DATA_DIR")+"/Shapes/Brep/flight_solid.brep")
|
|
|
|
# get a face
|
|
faces = geompy.SubShapeAllSorted(ImportFromBREP, geompy.ShapeType["FACE"])
|
|
|
|
# get the free boundary for face 32
|
|
Res = geompy.GetFreeBoundary(faces[32])
|
|
isSuccess = Res[0]
|
|
ClosedWires = Res[1]
|
|
OpenWires = Res[2]
|
|
|
|
if isSuccess == 1 :
|
|
print "Checking free boudaries is OK."
|
|
else :
|
|
print "Checking free boudaries is KO!"
|
|
print "len(ClosedWires) = ", len(ClosedWires)
|
|
|
|
i = 0
|
|
for wire in ClosedWires :
|
|
wire_name = "Face 32 -> Close wires : WIRE %d"%(i+1)
|
|
geompy.addToStudy(ClosedWires[i], wire_name)
|
|
if i < len(ClosedWires) :
|
|
i = i+ 1
|
|
|
|
print "len(OpenWires) = ", len(OpenWires)
|
|
|
|
i = 0
|
|
for wire in OpenWires :
|
|
wire_name = "Face 32 -> Open wires : WIRE %d"%(i+1)
|
|
geompy.addToStudy(OpenWires[i], wire_name)
|
|
if i < len(OpenWires) :
|
|
i = i+ 1
|
|
|
|
# get the free boundary for face 41
|
|
Res = geompy.GetFreeBoundary(faces[41])
|
|
isSuccess = Res[0]
|
|
ClosedWires = Res[1]
|
|
OpenWires = Res[2]
|
|
|
|
if isSuccess == 1 :
|
|
print "Checking free boudaries is OK."
|
|
else :
|
|
print "Checking free boudaries is KO!"
|
|
print "len(ClosedWires) = ", len(ClosedWires)
|
|
|
|
i = 0
|
|
for wire in ClosedWires :
|
|
wire_name = "Face 41 -> Close wires : WIRE %d"%(i+1)
|
|
geompy.addToStudy(ClosedWires[i], wire_name)
|
|
if i < len(ClosedWires) :
|
|
i = i+ 1
|
|
|
|
print "len(OpenWires) = ", len(OpenWires)
|
|
|
|
i = 0
|
|
for wire in OpenWires :
|
|
wire_name = "Face 41 -> Open wires : WIRE %d"%(i+1)
|
|
geompy.addToStudy(OpenWires[i], wire_name)
|
|
if i < len(OpenWires) :
|
|
i = i+ 1
|
|
|
|
# add the imported object to the study
|
|
id_ImportFromBREP = geompy.addToStudy(ImportFromBREP, "ImportFromBREP")
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
|
|
<br><h2>Check Free Faces</h2>
|
|
|
|
\code
|
|
import geompy
|
|
import salome
|
|
gg = salome.ImportComponentGUI("GEOM")
|
|
|
|
# create a vertex and a vector
|
|
p1 = geompy.MakeVertex(35, 35, 0)
|
|
p2 = geompy.MakeVertex(35, 35, 50)
|
|
v = geompy.MakeVector(p1, p2)
|
|
|
|
# create a cylinder
|
|
cylinder = geompy.MakeCone(p1, v, 30, 20, 20)
|
|
|
|
# create a cone
|
|
cone = geompy.MakeCone(p1, v, 70, 40, 60)
|
|
|
|
# make cut
|
|
cut = geompy.MakeCut(cone, cylinder)
|
|
|
|
# get faces as sub-shapes
|
|
faces = []
|
|
faces = geompy.SubShapeAllSorted(cut, geompy.ShapeType["FACE"])
|
|
f_2 = geompy.GetSubShapeID(cut, faces[0])
|
|
|
|
# remove one face from the shape
|
|
cut_without_f_2 = geompy.SuppressFaces(cut, [f_2])
|
|
|
|
# suppress the specified wire
|
|
result = geompy.GetFreeFacesIDs(cut_without_f_2)
|
|
print "A number of free faces is ", len(result)
|
|
|
|
# add objects in the study
|
|
all_faces = geompy.SubShapeAllSorted(cut_without_f_2, geompy.ShapeType["FACE"])
|
|
for face in all_faces :
|
|
sub_shape_id = geompy.GetSubShapeID(cut_without_f_2, face)
|
|
if result.count(sub_shape_id) > 0 :
|
|
face_name = "Free face %d"%(sub_shape_id)
|
|
geompy.addToStudy(face, face_name)
|
|
|
|
# in this example all faces from cut_without_f_2 are free
|
|
id_cut_without_f_2 = geompy.addToStudy(cut_without_f_2, "Cut without f_2")
|
|
|
|
# display the results
|
|
gg.createAndDisplayGO(id_cut_without_f_2)
|
|
gg.setDisplayMode(id_cut_without_f_2,1)
|
|
\endcode
|
|
|
|
|
|
|
|
<br><h2>Bounding Box</h2>
|
|
|
|
\code
|
|
import geompy
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
bb = geompy.BoundingBox(box)
|
|
print "\nBounding Box of box 100x30x100:"
|
|
print " Xmin = ", bb[0], ", Xmax = ", bb[1]
|
|
print " Ymin = ", bb[2], ", Ymax = ", bb[3]
|
|
print " Zmin = ", bb[4], ", Zmax = ", bb[5]
|
|
\endcode
|
|
|
|
<br><h2>Minimal Distance</h2>
|
|
|
|
\code
|
|
import geompy
|
|
|
|
# create boxes
|
|
box1 = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
box2 = geompy.MakeBox(105,0,0,200,30,100)
|
|
min_dist = geompy.MinDistance(box1,box2)
|
|
print "\nMinimal distance between box1 and box2 = ", min_dist
|
|
\endcode
|
|
|
|
<br><h2>Tolerance</h2>
|
|
|
|
\code
|
|
import geompy
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
Toler = geompy.Tolerance(box)
|
|
print "\nBox 100x30x100 tolerance:"
|
|
print " Face min. tolerance: ", Toler[0]
|
|
print " Face max. tolerance: ", Toler[1]
|
|
print " Edge min. tolerance: ", Toler[2]
|
|
print " Edge max. tolerance: ", Toler[3]
|
|
print " Vertex min. tolerance: ", Toler[4]
|
|
print " Vertex max. tolerance: ", Toler[5]
|
|
\endcode
|
|
|
|
<br><h2>Angle</h2>
|
|
|
|
\code
|
|
import salome
|
|
salome.salome_init()
|
|
|
|
import math
|
|
import geompy
|
|
geompy.init_geom(salome.myStudy)
|
|
|
|
OX = geompy.MakeVectorDXDYDZ(10, 0,0)
|
|
OXY = geompy.MakeVectorDXDYDZ(10,10,0)
|
|
|
|
# in one plane
|
|
Angle = geompy.GetAngle(OX, OXY)
|
|
|
|
print "\nAngle between OX and OXY = ", Angle
|
|
if math.fabs(Angle - 45.0) > 1e-05:
|
|
print " Error: returned angle is", Angle, "while must be 45.0"
|
|
pass
|
|
|
|
Angle = geompy.GetAngleRadians(OX, OXY)
|
|
|
|
print "\nAngle between OX and OXY in radians = ", Angle
|
|
if math.fabs(Angle - math.pi/4) > 1e-05:
|
|
print " Error: returned angle is", Angle, "while must be pi/4"
|
|
pass
|
|
|
|
# not in one plane
|
|
OXY_shift = geompy.MakeTranslation(OXY,10,-10,20)
|
|
Angle = geompy.GetAngle(OX, OXY_shift)
|
|
|
|
print "Angle between OX and OXY_shift = ", Angle
|
|
if math.fabs(Angle - 45.0) > 1e-05:
|
|
print " Error: returned angle is", Angle, "while must be 45.0"
|
|
pass
|
|
|
|
# not linear
|
|
pnt1 = geompy.MakeVertex(0, 0, 0)
|
|
pnt2 = geompy.MakeVertex(10, 0, 0)
|
|
pnt3 = geompy.MakeVertex(20, 10, 0)
|
|
arc = geompy.MakeArc(pnt1, pnt2, pnt3)
|
|
Angle = geompy.GetAngle(OX, arc)
|
|
|
|
if (math.fabs(Angle + 1.0) > 1e-6 or geompy.MeasuOp.IsDone()):
|
|
print "Error. Angle must not be computed on curvilinear edges"
|
|
pass
|
|
|
|
\endcode
|
|
|
|
|
|
<br><h2>What Is</h2>
|
|
|
|
\code
|
|
import geompy
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
Descr = geompy.WhatIs(box)
|
|
print "\nBox 100x30x100 description:"
|
|
print Descr
|
|
\endcode
|
|
|
|
<br><h2>Check Shape</h2>
|
|
|
|
\code
|
|
import geompy
|
|
|
|
# create a box
|
|
box = geompy.MakeBoxDXDYDZ(100,30,100)
|
|
IsValid = geompy.CheckShape(box)
|
|
if IsValid == 0:
|
|
raise RuntimeError, "Invalid box created"
|
|
else:
|
|
print "\nBox is valid"
|
|
\endcode
|
|
|
|
<br><h2>Check Compound of Blocks</h2>
|
|
|
|
\code
|
|
import geompy
|
|
import salome
|
|
gg = salome.ImportComponentGUI("GEOM")
|
|
|
|
# create boxes
|
|
box1 = geompy.MakeBox(0,0,0,100,50,100)
|
|
box2 = geompy.MakeBox(100,0,0,250,50,100)
|
|
|
|
# make a compound
|
|
compound = geompy.MakeCompound([box1, box2])
|
|
|
|
# glue the faces of the compound
|
|
tolerance = 1e-5
|
|
glue = geompy.MakeGlueFaces(compound, tolerance)
|
|
IsValid = geompy.CheckCompoundOfBlocks(glue)
|
|
if IsValid == 0:
|
|
raise RuntimeError, "Invalid compound created"
|
|
else:
|
|
print "\nCompound is valid"
|
|
\endcode
|
|
|
|
*/
|