visualization dialog box

ng/dialog.tcl

@@ -3518,12 +3518,10 @@ proc runtestdialog { } {
     if {[winfo exists .runtest_dlg] == 1} {
 	wm withdraw $w
 	wm deiconify $w
-#	wm geometry $w =270x100
 
 	focus $w 
     } {
 	toplevel $w
-#	wm geometry $w =270x100
 
 # in2d testing #
 	frame $w.in2dframe 

ng/menustat.tcl

@@ -27,7 +27,7 @@ menu .ngmenu.file
 .ngmenu.file add command -label "Load Geometry..." -accelerator "<l><g>" \
     -command { 
 	set types {
-	    {"All Geometry types"   { .stl .stlb .step .stp .geo .in2d .igs .iges .brep .in2dnew .sat} }
+	    {"All Geometry types"   { .stl .stlb .step .stp .geo .in2d .igs .iges .brep .sat} }
 	    {"IGES Geometry"	{.igs .iges} }
 	    {"BREP OpenCascade Geometry"    {.brep} }
 	    {"STL Geometry"        {.stl} }
@@ -35,7 +35,6 @@ menu .ngmenu.file
 	    {"STEP Geometry"    {.step .stp} }
 	    {"Geometry file"       {.geo} }
 	    {"2D Geometry"   {.in2d } } 
-	    {"2D Geometry New"   {.in2dnew } } 
 	} 
 
 	set ACISavailable [Ng_ACISCommand isACISavailable]
@@ -43,10 +42,6 @@ menu .ngmenu.file
 	    lappend types {"ACIS Geometry" {.sat} }
 	}
 
-#	    {"All Geometry types"  {.stl .stlb .step .stp .geo .in2d .igs .iges .brep .in2dnew} }
-	
-#		{"Naomi Geometry"      {.nao} }
-#		{"New Geometry file"   {.ngg} } 
 	
 	if {[catch {
 	    set file [tk_getOpenFile -filetypes $types -initialdir $dirname -typevariable loadgeomtypevar]
@@ -398,10 +393,10 @@ set videoactive 0
 
 
 ## herbert tcl load menue
-.ngmenu.file add command -label "Run tests ..." \
-    -command { runtestdialog }
+# .ngmenu.file add command -label "Run tests ..." \
+\#    -command { runtestdialog }
 ##
-.ngmenu.file add separator
+# .ngmenu.file add separator
 
 .ngmenu.file add command -label "Quit" -accelerator "<q>" \
     -command { puts "Thank you for using $progname"; Ng_Exit; destroy . }

ng/ngshell.tcl

@@ -20,9 +20,12 @@ proc Ng_RunShell {} {
 }
 
 ## global list for help index
-set cmdindex {}
-set hlpindex {}
-set secindex {}
+# ---> global var in variables.tcl
+# set cmdindex {}
+# set hlpindex {}
+# set secindex {}
+
+
 
 # print comd list
 proc Ng_PrintCmdIndex { } {
@@ -51,6 +54,9 @@ proc Ng_RegisterCmd { cmd section syntax {help ""} } {
   global hlpindex
   global cmdindex
   global secindex
+
+    puts "register command $cmd"
+
   if { [lsearch $cmdindex cmd] != -1 } {
     puts "command '$cmd' already defined"
   } else {
@@ -64,6 +70,7 @@ proc Ng_RegisterCmd { cmd section syntax {help ""} } {
   }
 }
 
+
 # general purpose commands
 Ng_RegisterCmd "exit" "general" "exit" "exit Netgen shell mode" 
 #Ng_RegisterCmd "Ng_LoadGeometry" "netgen" "Ng_LoadGeometry <file>" "load geometry file" 
@@ -247,7 +254,5 @@ proc ngssolvepde {} {
   NGS_SolvePDE 
 }
 
-catch {source "${::ngdir}/ngtcltk/ngtesting.tcl"} errcode
+catch {source "${::ngdir}/ngtesting.tcl"} errcode
 # puts "errcode = $errcode"
-
-

ng/ngtesting.tcl

@@ -64,7 +64,7 @@ proc ngtest { {t all} {f ""}} {
     }  
   
     puts "\n ** testing in2d files in tutorials/ **"
-    set testdir "$::ngdir/../tutorials"
+    set testdir "$::ngdir/../share/netgen"
     set in2dfiles { demo2d  newin2d  square  v2in2d }
     foreach {tfile} $in2dfiles {
       if {$f != ""} { puts "  * meshing file tutorials/$tfile.in2d..." }
@@ -89,7 +89,7 @@ proc ngtest { {t all} {f ""}} {
     } 
   
     puts "\n ** testing geo files in tutorials/ **"
-    set testdir "$::ngdir/../tutorials"
+    set testdir "$::ngdir/../share/netgen"
     set geofiles { boxcyl          cubemcyl     extrusion  revolution    trafo
                    circle_on_cube  cubemsphere  fichera    sculpture     twobricks
                    cone            cylinder     lshape3d   shaft         twocubes

ng/ngvisual.tcl

@@ -1005,59 +1005,8 @@ proc visual_dialog { } {
 
 	toplevel $w
 
-	checkbutton $w.imaginary -text "Imaginary Part" \
-	    -variable visoptions.imaginary \
-	    -command { Ng_Vis_Set parameters; redraw }
 
 	
-	frame $w.texframe
-
-	checkbutton $w.texframe.usetexture -text "Use Textures (" \
-	    -variable visoptions.usetexture \
-	    -command { Ng_Vis_Set parameters; redraw }
-	
-	checkbutton $w.texframe.lintexture -text "Linear )" \
-	    -variable visoptions.lineartexture \
-	    -command { Ng_Vis_Set parametersrange; redraw }
-
-	
-#	pack $w.texframe.usetexture $w.texframe.lintexture -side left -expand yes
-
-
-	checkbutton $w.invcolor -text "Inverse Color" \
-	    -variable visoptions.invcolor \
-	    -command { Ng_Vis_Set parametersrange; redraw }
-	
-	checkbutton $w.redrawperiodic -text "Animate periodic" \
-	    -variable visoptions.redrawperiodic \
-	    -command { 
-		redrawperiodic
-		Ng_Vis_Set parameters; 
-		redraw 
-	    }
-	
-
-	checkbutton $w.logscale -text "Log Scale" \
-	    -variable visoptions.logscale \
-	    -command { Ng_Vis_Set parameters; redraw }
-	
-	checkbutton $w.lineartexture -text "Use Linear Texture" \
-	    -variable visoptions.lineartexture \
-	    -command { Ng_Vis_Set parameters; redraw }
-	
-	scale $w.numcols -orient horizontal -length 100 -from 0 -to 50 \
-	    -resolution 1   \
-	    -variable  visoptions.numtexturecols \
-	    -command { popupcheckredraw visual_dialog_pop1 }
-
-	checkbutton $w.showclipsolution -text "Draw Clipping Plane Solution" \
-	    -variable visoptions.showclipsolution \
-	    -command { Ng_Vis_Set parameters; redraw }
-
-	checkbutton $w.showsurfsolution -text "Draw Surface Solution" \
-	    -variable visoptions.showsurfacesolution \
-	    -command { Ng_Vis_Set parameters; redraw }
-
 
 
 	frame $w.grid -relief groove -borderwidth 3
@@ -1084,7 +1033,6 @@ proc visual_dialog { } {
 
 
 	# pack $w.showclipsolution 
-	pack $w.showsurfsolution
 	pack $w.grid -fill x -ipady 3
 	pack $w.grid.size $w.grid.xoffset $w.grid.yoffset -side left -expand yes
 
@@ -1235,11 +1183,6 @@ proc visual_dialog { } {
 #	pack $w.iso.zpos -side right
 
 
-	checkbutton $w.showcurves -text "Show Curves" \
-	    -variable visoptions.drawpointcurves \
-	    -command { Ng_Vis_Set parameters; redraw }
-
-	pack $w.showcurves
 
 	frame $w.redraw -relief groove -borderwidth 3
 	checkbutton $w.redraw.auto -text "Auto-redraw" \
@@ -1335,16 +1278,12 @@ proc visual_dialog { } {
 	    } 
 	}
 
-
 	$w.scalfun configure -variable visoptions.scalfunction 
 	$w.scalfun configure -command { Ng_Vis_Set parameters; redraw }
 	$w.vecfun configure -variable visoptions.vecfunction
 	$w.vecfun configure -command { Ng_Vis_Set parameters; redraw }
 
 
-#	puts "sclfunction = ${visoptions.scalfunction}"
-
-
 	tixOptionMenu $w.evaluate -label "Evaluate: " \
 	    -options {
 		label.width  18
@@ -1372,13 +1311,72 @@ proc visual_dialog { } {
 		label.anchor e
 	    }	
 
-
 	pack $w.multidimcomp
 
+
+	checkbutton $w.showsurfsolution -text "Draw Surface Vectors" \
+	    -variable visoptions.showsurfacesolution \
+	    -command { Ng_Vis_Set parameters; redraw }
+
+	checkbutton $w.showcurves -text "Show Curves" \
+	    -variable visoptions.drawpointcurves \
+	    -command { Ng_Vis_Set parameters; redraw }
+
+	checkbutton $w.imaginary -text "Imaginary Part" \
+	    -variable visoptions.imaginary \
+	    -command { Ng_Vis_Set parameters; redraw }
+
+	checkbutton $w.logscale -text "Log Scale" \
+	    -variable visoptions.logscale \
+	    -command { Ng_Vis_Set parameters; redraw }
+
+	checkbutton $w.invcolor -text "Inverse Color" \
+	    -variable visoptions.invcolor \
+	    -command { Ng_Vis_Set parametersrange; redraw }
+
+
+	frame $w.texframe
+
+	checkbutton $w.texframe.usetexture -text "Use Textures (" \
+	    -variable visoptions.usetexture \
+	    -command { Ng_Vis_Set parameters; redraw }
+	
+	checkbutton $w.texframe.lintexture -text "Linear )" \
+	    -variable visoptions.lineartexture \
+	    -command { Ng_Vis_Set parametersrange; redraw }
+
+
+	
+	checkbutton $w.lineartexture -text "Use Linear Texture" \
+	    -variable visoptions.lineartexture \
+	    -command { Ng_Vis_Set parameters; redraw }
+	
+	scale $w.numcols -orient horizontal -length 100 -from 0 -to 50 \
+	    -resolution 1   \
+	    -variable  visoptions.numtexturecols \
+	    -command { popupcheckredraw visual_dialog_pop1 }
+
+	checkbutton $w.showclipsolution -text "Draw Clipping Plane Solution" \
+	    -variable visoptions.showclipsolution \
+	    -command { Ng_Vis_Set parameters; redraw }
+
+
+	checkbutton $w.redrawperiodic -text "Animate periodic" \
+	    -variable visoptions.redrawperiodic \
+	    -command { 
+		redrawperiodic
+		Ng_Vis_Set parameters; 
+		redraw 
+	    }
+
+
+	pack $w.showsurfsolution $w.showcurves
 	pack $w.imaginary $w.logscale $w.texframe $w.invcolor $w.redrawperiodic
 	pack $w.texframe.usetexture $w.texframe.lintexture -side left -expand yes
 	
 
+
+
 	frame $w.bu
 	pack $w.bu  -pady 5
 
@@ -1447,12 +1445,16 @@ proc reset_visual_dialog { } {
 
 	  
 	  
-	  
-	  
 	  checkbutton $w.invcolor -text "Inverse Color" \
 	      -variable visoptions.invcolor \
 	      -command { Ng_Vis_Set parameters; redraw }
 
+	  checkbutton $w.logscale -text "Log Scale" \
+	      -variable visoptions.logscale \
+	      -command { Ng_Vis_Set parameters; redraw }
+	  
+
+	  
 	  checkbutton $w.redrawperiodic -text "Animate periodic" \
 	      -variable visoptions.redrawperiodic \
 	      -command { 
@@ -1462,11 +1464,6 @@ proc reset_visual_dialog { } {
 	      }
 	  
 
-	checkbutton $w.logscale -text "Log Scale" \
-	    -variable visoptions.logscale \
-	    -command { Ng_Vis_Set parameters; redraw }
-
-
 	tixOptionMenu $w.scalfun -label "Scalar Function: " \
 	    -options {
 		label.width  18

ng/variables.tcl

@@ -691,3 +691,9 @@ proc loadmeshinifile { } {
  }
 
 
+
+
+
+set cmdindex {}
+set hlpindex {}
+set secindex {}