#include <mystdlib.h>
#include "meshing.hpp"
#include "meshing2.hpp"
#include "delaunay2d.hpp"
#include "debugging.hpp"
#include "global.hpp"
#include "../geom2d/csg2d.hpp"

#include <set>
#include <regex>

namespace netgen
{
   void InsertVirtualBoundaryLayer (Mesh & mesh)
   {
      cout << "Insert virt. b.l." << endl;

      int surfid;

      cout << "Boundary Nr:";
      cin >> surfid;

      int i;
      int np = mesh.GetNP();

      cout << "Old NP: " << mesh.GetNP() << endl;
      cout << "Trigs: " << mesh.GetNSE() << endl;

      NgBitArray bndnodes(np);
      NgArray<int> mapto(np);

      bndnodes.Clear();
      for (i = 1; i <= mesh.GetNSeg(); i++)
      {
         int snr = mesh.LineSegment(i).edgenr;
         cout << "snr = " << snr << endl;
         if (snr == surfid)
         {
            bndnodes.Set (mesh.LineSegment(i)[0]);
            bndnodes.Set (mesh.LineSegment(i)[1]);
         }
      }
      for (i = 1; i <= mesh.GetNSeg(); i++)
      {
         int snr = mesh.LineSegment(i).edgenr;
         if (snr != surfid)
         {
            bndnodes.Clear (mesh.LineSegment(i)[0]);
            bndnodes.Clear (mesh.LineSegment(i)[1]);
         }
      }

      for (i = 1; i <= np; i++)
        {
          if (bndnodes.Test(i))
            mapto.Elem(i) = mesh.AddPoint (mesh.Point (i));
          else
            mapto.Elem(i) = 0;
        }

      for (i = 1; i <= mesh.GetNSE(); i++)
      {
         Element2d & el = mesh.SurfaceElement(i);
         for (int j = 1; j <= el.GetNP(); j++)
            if (mapto.Get(el.PNum(j)))
               el.PNum(j) = mapto.Get(el.PNum(j));
      }


      int nq = 0;
      for (i = 1; i <= mesh.GetNSeg(); i++)
      {
         int snr = mesh.LineSegment(i).edgenr;
         if (snr == surfid)
         {
            int p1 = mesh.LineSegment(i)[0];
            int p2 = mesh.LineSegment(i)[1];
            int p3 = mapto.Get (p1);
            if (!p3) p3 = p1;
            int p4 = mapto.Get (p2);
            if (!p4) p4 = p2;

            Element2d el(QUAD);
            el.PNum(1) = p1;
            el.PNum(2) = p2;
            el.PNum(3) = p3;
            el.PNum(4) = p4;
            el.SetIndex (2);
            mesh.AddSurfaceElement (el);
            nq++;
         }
      }

      cout << "New NP: " << mesh.GetNP() << endl;
      cout << "Quads: " << nq << endl;
   }

  // checks if a segment is intersecting a plane, spanned by three points, lam will be set s.t. p_intersect = seg[0] + lam * (seg[1]-seg[0])
  bool isIntersectingPlane ( const array<Point<3>, 2> & seg, const array<Point<3>, 3> & trig, double & lam)
  {
      auto n = Cross(trig[1]-trig[0], trig[2]-trig[0]);
      auto v0n = (seg[0]-trig[0])*n;
      auto v1n = (seg[1]-trig[0])*n;
      if(v0n * v1n >= 0)
          return false;

      lam = -v0n/(v1n-v0n);
      lam *= 0.9;
      if(lam < -1e-8 || lam>1+1e-8)
          return false;
      return true;
  }

  bool isIntersectingPlane ( const array<Point<3>, 2> & seg, const ArrayMem<Point<3>, 4> & face, double & lam)
  {
     lam = 1.0;
     bool intersect0 = isIntersectingPlane( seg, array<Point<3>, 3>{face[0], face[1], face[2]}, lam );
     if(face.Size()==3)
         return intersect0;

     double lam1 = 1.0;
     bool intersect1 = isIntersectingPlane( seg, array<Point<3>, 3>{face[2], face[3], face[0]}, lam1 );
     lam = min(lam, lam1);
     return intersect0 || intersect1;
  }

  bool isIntersectingTrig ( const array<Point<3>, 2> & seg, const array<Point<3>, 3> & trig, double & lam)
  {
      if(!isIntersectingPlane(seg, trig, lam))
          return false;

      auto p = seg[0] + lam/0.9*(seg[1]-seg[0]);

      auto n_trig = Cross(trig[1]-trig[0], trig[2]-trig[0]).Normalize();
      for(auto i : Range(3))
      {
          // check if p0 and p are on same side of segment p1-p2
          auto p0 = trig[i];
          auto p1 = trig[(i+1)%3];
          auto p2 = trig[(i+2)%3];
          auto n = Cross(p2-p1, n_trig);

          auto v0 = (p2-p1).Normalize();
          auto v1 = (p0-p1).Normalize();
          auto inside_dir = (v1 - (v1*v0) * v0).Normalize();
          auto v2 = (p-p1).Normalize();
          if(inside_dir * v1 < 0)
              inside_dir = -inside_dir;

          if( (inside_dir*v2) < 0 )
              return false;
      }
      return true;
  };

  bool isIntersectingFace( const array<Point<3>, 2> & seg,  const ArrayMem<Point<3>, 4> & face, double & lam )
  {
      lam = 1.0;
      double lam0 = 1.0;
      bool intersect0 = isIntersectingTrig( seg, {face[0], face[1], face[2]}, lam0 );
      if(intersect0)
          lam = min(lam, lam0);
      if(face.Size()==3)
          return intersect0;

      double lam1 = 1.0;
      bool intersect1 = isIntersectingTrig( seg, {face[2], face[3], face[0]}, lam1 );
      if(intersect1)
          lam = min(lam, lam1);
      return intersect0 || intersect1;
  }

  array<Point<3>, 2> BoundaryLayerTool :: GetMappedSeg( PointIndex pi )
  {
      return { mesh[pi], mesh[pi] + height*limits[pi]*growthvectors[pi] };
  }

  ArrayMem<Point<3>, 4> BoundaryLayerTool :: GetFace( SurfaceElementIndex sei )
  {
      const auto & sel = mesh[sei];
      ArrayMem<Point<3>, 4> points(sel.GetNP());
      for(auto i : Range(sel.GetNP()))
          points[i] = mesh[sel[i]];
      return points;
  }

  ArrayMem<Point<3>, 4> BoundaryLayerTool :: GetMappedFace( SurfaceElementIndex sei )
  {
      const auto & sel = mesh[sei];
      ArrayMem<Point<3>, 4> points(sel.GetNP());
      for(auto i : Range(sel.GetNP()))
          points[i] = mesh[sel[i]] + height * limits[sel[i]]*growthvectors[sel[i]];
      return points;
  }

  ArrayMem<Point<3>, 4> BoundaryLayerTool :: GetMappedFace( SurfaceElementIndex sei, int face )
  {
      if(face == -1) return GetFace(sei);
      if(face == -2) return GetMappedFace(sei);
      const auto & sel = mesh[sei];
      auto np = sel.GetNP();
      auto pi0 = sel[face % np];
      auto pi1 = sel[(face+1) % np];
      ArrayMem<Point<3>, 4> points(4);
      points[0] = points[3] = mesh[pi0];
      points[1] = points[2] = mesh[pi1];
      points[3] += height * limits[pi0]*growthvectors[pi0];
      points[2] += height * limits[pi1]*growthvectors[pi1];
      return points;
  }

  Vec<3> BoundaryLayerTool :: getEdgeTangent(PointIndex pi, int edgenr)
  {
      Vec<3> tangent = 0.0;
      ArrayMem<PointIndex,2> pts;
      for(auto segi : topo.GetVertexSegments(pi))
      {
          auto & seg = mesh[segi];
          if(seg.edgenr != edgenr+1)
              continue;
          PointIndex other = seg[0]+seg[1]-pi;
          if(!pts.Contains(other))
            pts.Append(other);
      }
      if(pts.Size() != 2)
        throw Exception("Something went wrong in getEdgeTangent!");
      tangent = mesh[pts[1]] - mesh[pts[0]];
      return tangent.Normalize();
  }

  void BoundaryLayerTool :: LimitGrowthVectorLengths()
  {
    static Timer tall("BoundaryLayerTool::LimitGrowthVectorLengths"); RegionTimer rtall(tall);

    limits.SetSize(np);
    limits = 1.0;

    auto smooth = [&] (size_t nsteps) {
        for(auto i : Range(nsteps))
            for(const auto & sel : mesh.SurfaceElements())
            {
                double min_limit = 999;
                for(auto pi : sel.PNums())
                    min_limit = min(min_limit, limits[pi]);
                for(auto pi : sel.PNums())
                    limits[pi] = min(limits[pi], 1.4*min_limit);
            }
    };

    // check for self-intersection within new elements (prisms/hexes)
    auto self_intersection = [&] () {
        for(SurfaceElementIndex sei : mesh.SurfaceElements().Range())
          {
            auto facei = mesh[sei].GetIndex();
            if(facei < nfd_old && !params.surfid.Contains(facei))
                continue;

            auto sel = mesh[sei];
            auto np = sel.GetNP();
            // check if a new edge intesects the plane of any opposing face
            double lam;
            for(auto i : Range(np))
                for(auto fi : Range(np-2))
                    if(isIntersectingPlane(GetMappedSeg(sel[i]), GetMappedFace(sei, i+fi+1), lam))
                        if(lam < 1.0)
                            limits[sel[i]] *= lam;
          }
    };

    // first step: intersect with other surface elements that are boundary of domain the layer is grown into
    // second (and subsequent) steps: intersect with other boundary layers, allow restriction by 20% in each step
    auto changed_domains = domains;
      if(!params.outside)
          changed_domains.Invert();

    bool limit_reached = true;
    double lam_lower_limit = 1.0;
    int step = 0;
    while(limit_reached || step<2)
    {
        if(step>0)
            lam_lower_limit *= 0.8;
        limit_reached = false;

        // build search tree with all surface elements (bounding box of a surface element also covers the generated boundary layer)
        Box<3> bbox(Box<3>::EMPTY_BOX);
        for(auto pi : mesh.Points().Range())
        {
            bbox.Add(mesh[pi]);
            bbox.Add(mesh[pi]+limits[pi]*height*growthvectors[pi]);
        }
        BoxTree<3> tree(bbox);

        for(auto sei : mesh.SurfaceElements().Range())
        {
            const auto & sel = mesh[sei];
            Box<3> box(Box<3>::EMPTY_BOX);
            const auto& fd = mesh.GetFaceDescriptor(sel.GetIndex());
            if(!changed_domains.Test(fd.DomainIn()) &&
               !changed_domains.Test(fd.DomainOut()))
              continue;
            for(auto pi : sel.PNums())
                box.Add(mesh[pi]);
            // also add moved points to bounding box
            if(params.surfid.Contains(sel.GetIndex()))
                for(auto pi : sel.PNums())
                    box.Add(mesh[pi]+limits[pi]*height*growthvectors[pi]);
            tree.Insert(box, sei);
        }

        for(auto pi : mesh.Points().Range())
        {
            if(mesh[pi].Type() == INNERPOINT)
                continue;
            if(growthvectors[pi].Length2() == 0.0)
                continue;
            Box<3> box(Box<3>::EMPTY_BOX);
            auto seg = GetMappedSeg(pi);
            box.Add(seg[0]);
            box.Add(seg[1]);
            double lam = 1.0;
            tree.GetFirstIntersecting(box.PMin(), box.PMax(), [&](SurfaceElementIndex sei)
              {
                const auto & sel = mesh[sei];
                if(sel.PNums().Contains(pi))
                    return false;
                auto face = GetMappedFace(sei, -2);
                double lam_ = 999;
                bool is_bl_sel = params.surfid.Contains(sel.GetIndex());

                if(step==0)
                {
                    if(isIntersectingFace(seg, face, lam_))
                    {
                        if(is_bl_sel) // allow only half the distance if the opposing surface element has a boundary layer too
                            lam_ *= 0.5;
                        lam = min(lam, lam_);
                    }
                }
                // if the opposing surface element has a boundary layer, we need to additionally intersect with the new faces 
                if(step>0 && is_bl_sel)
                {
                    for(auto facei : Range(-1, sel.GetNP()))
                    {
                        auto face = GetMappedFace(sei, facei);
                        if(isIntersectingFace(seg, face, lam_)) // && lam_ > other_limit)
                        {
                            lam = min(lam, lam_);
                        }
                    }
                }
                return false;
              });
            if(lam<1)
            {
                if(lam<lam_lower_limit && step>0)
                {
                    limit_reached = true;
                    lam = lam_lower_limit;
                }
                limits[pi] = min(limits[pi], lam);
            }
        }
        step++;
    }

    self_intersection();
    smooth(3);

    for(auto pi : Range(growthvectors))
        growthvectors[pi] *= limits[pi];

  }


  // depending on the geometry type, the mesh contains segments multiple times (once for each face)
  bool HaveSingleSegments( const Mesh & mesh )
  {
      auto& topo = mesh.GetTopology();
      NgArray<SurfaceElementIndex> surf_els;

      for(auto segi : Range(mesh.LineSegments()))
      {
          mesh.GetTopology().GetSegmentSurfaceElements(segi+1, surf_els);
          if(surf_els.Size()<2)
              continue;

          auto seg = mesh[segi];
          auto pi0 = min(seg[0], seg[1]);
          auto pi1 = max(seg[0], seg[1]);
          auto p0_segs = topo.GetVertexSegments(seg[0]);

          for(auto segi_other : p0_segs)
          {
              if(segi_other == segi)
                  continue;

              auto seg_other = mesh[segi_other];
              auto pi0_other = min(seg_other[0], seg_other[1]);
              auto pi1_other = max(seg_other[0], seg_other[1]);
              if( pi0_other == pi0 && pi1_other == pi1 )
                  return false;
          }

          // found segment with multiple adjacent surface elements but no other segments with same points -> have single segments
          return true;
      }

      return true;
  }

  // duplicates segments (and sets seg.si accordingly) to have a unified data structure for all geometry types
  Array<Segment> BuildSegments( Mesh & mesh )
  {
      Array<Segment> segments;
      auto& topo = mesh.GetTopology();

      NgArray<SurfaceElementIndex> surf_els;

      for(auto segi : Range(mesh.LineSegments()))
      {
          auto seg = mesh[segi];
          mesh.GetTopology().GetSegmentSurfaceElements(segi+1, surf_els);
          for(auto seli : surf_els)
          {
              const auto & sel = mesh[seli];
              seg.si = sel.GetIndex();

              auto np = sel.GetNP();
              for(auto i : Range(np))
              {
                  if(sel[i] == seg[0])
                  {
                      if(sel[(i+1)%np] != seg[1])
                          swap(seg[0], seg[1]);
                      break;
                  }
              }

              segments.Append(seg);
          }
      }
      return segments;
  }

  void MergeAndAddSegments( Mesh & mesh, FlatArray<Segment> new_segments)
  {
      INDEX_2_HASHTABLE<bool> already_added( 2*new_segments.Size() );

      for(auto & seg : new_segments)
      {
          INDEX_2 i2 (seg[0], seg[1]);
          i2.Sort();

          if(!already_added.Used(i2))
          {
              mesh.AddSegment(seg);
              already_added.Set(i2, true);
          }
      }
  }

  void BoundaryLayerTool :: InterpolateSurfaceGrowthVectors()
  {
    static Timer tall("InterpolateSurfaceGrowthVectors"); RegionTimer rtall(tall);
    static Timer tsmooth("InterpolateSurfaceGrowthVectors-Smoothing");
    auto np = mesh.GetNP();
    BitArray is_point_on_bl_surface(np+1);
    is_point_on_bl_surface.Clear();
    BitArray is_point_on_other_surface(np+1);
    is_point_on_other_surface.Clear();
    Array<Vec<3>, PointIndex> normals(np);
    for(auto pi : Range(growthvectors))
        normals[pi] = growthvectors[pi];

    ParallelForRange( mesh.SurfaceElements().Range(), [&] ( auto myrange )
      {
        for(SurfaceElementIndex sei : myrange)
          {
            auto facei = mesh[sei].GetIndex();
            if(facei < nfd_old && !params.surfid.Contains(facei))
              {
                for(auto pi : mesh[sei].PNums())
                  if(mesh[pi].Type() == SURFACEPOINT)
                    is_point_on_other_surface.SetBitAtomic(pi);
              }
            else
              {
                for(auto pi : mesh[sei].PNums())
                  if(mesh[pi].Type() == SURFACEPOINT)
                    is_point_on_bl_surface.SetBitAtomic(pi);
              }
          }
      });

    Array<PointIndex> points;
    for(PointIndex pi : mesh.Points().Range())
      {
        if(is_point_on_bl_surface[pi])
        {
            points.Append(pi);
            growthvectors[pi] = 0.0;
        }
        if(is_point_on_other_surface[pi])
          {
            points.Append(pi);
          }
      }

    // smooth tangential part of growth vectors from edges to surface elements
    RegionTimer rtsmooth(tsmooth);
    for(auto i : Range(10))
    {
        for(auto pi : points)
        {
            auto sels = p2sel[pi];
            Vec<3> new_gw = growthvectors[pi];
            int cnt = 1;
            std::set<PointIndex> suround;
            suround.insert(pi);
            auto normal = normals[pi];
            for(auto sei: sels)
            {
                const auto & sel = mesh[sei];
                for(auto pi1 : sel.PNums())
                    if(suround.count(pi1)==0)
                    {
                        suround.insert(pi1);
                        auto gw_other = growthvectors[pi1];
                        auto normal_other = getNormal(mesh[sei]);
                        auto tangent_part = gw_other - (gw_other*normal_other)*normal_other;
                        if(is_point_on_bl_surface[pi])
                          new_gw += tangent_part;
                        else
                          new_gw += gw_other;
                    }
            }

            growthvectors[pi] = 1.0/suround.size() * new_gw;
        }
    }

    for(auto pi : points)
        growthvectors[pi] += normals[pi];
  }


  BoundaryLayerTool::BoundaryLayerTool(Mesh & mesh_, const BoundaryLayerParameters & params_)
      : mesh(mesh_), topo(mesh_.GetTopology()), params(params_)
  {
    static Timer timer("BoundaryLayerTool::ctor");
    RegionTimer regt(timer);

    //for(auto & seg : mesh.LineSegments())
        //seg.edgenr = seg.epgeominfo[1].edgenr;

    height = 0.0;
    for (auto h : params.heights)
      height += h;

    max_edge_nr = -1;
    for(const auto& seg : mesh.LineSegments())
      if(seg.edgenr > max_edge_nr)
        max_edge_nr = seg.edgenr;

    int ndom = mesh.GetNDomains();
    ndom_old = ndom;

    new_mat_nrs.SetSize(mesh.FaceDescriptors().Size() + 1);
    new_mat_nrs = -1;
    for(auto [bcname, matname] : params.new_mat)
      {
        mesh.SetMaterial(++ndom, matname);
        regex pattern(bcname);
        for(auto i : Range(1, mesh.GetNFD()+1))
          {
            auto& fd = mesh.GetFaceDescriptor(i);
            if(regex_match(fd.GetBCName(), pattern))
              new_mat_nrs[i] = ndom;
          }
      }

    domains = params.domains;
    if(!params.outside)
      domains.Invert();

    topo.SetBuildVertex2Element(true);
    mesh.UpdateTopology();

    have_single_segments = HaveSingleSegments(mesh);
    if(have_single_segments)
        segments = BuildSegments(mesh);
    else
        segments = mesh.LineSegments();

    np = mesh.GetNP();
    ne = mesh.GetNE();
    nse = mesh.GetNSE();
    nseg = segments.Size();

    p2sel = mesh.CreatePoint2SurfaceElementTable();

    nfd_old = mesh.GetNFD();
    si_map.SetSize(nfd_old+1);
    si_map = -1;
  }

  void BoundaryLayerTool :: CreateNewFaceDescriptors()
  {
    surfacefacs.SetSize(nfd_old+1);
    surfacefacs = 0.0;
    // create new FaceDescriptors
    for(auto i : Range(1, nfd_old+1))
      {
        const auto& fd = mesh.GetFaceDescriptor(i);
        string name = fd.GetBCName();
        if(params.surfid.Contains(i))
          {
            if(auto isIn = domains.Test(fd.DomainIn()); isIn != domains.Test(fd.DomainOut()))
              {
                int new_si = mesh.GetNFD()+1;
                surfacefacs[i] = isIn ? 1. : -1.;
                // -1 surf nr is so that curving does not do anything
                FaceDescriptor new_fd(-1, isIn ? new_mat_nrs[i] : fd.DomainIn(),
                                      isIn ? fd.DomainOut() : new_mat_nrs[i], -1);
                new_fd.SetBCProperty(new_si);
                mesh.AddFaceDescriptor(new_fd);
                si_map[i] = new_si;
                mesh.SetBCName(new_si-1, "mapped_" + name);
              }
          }
      }
  }

  void BoundaryLayerTool :: CalculateGrowthVectors()
  {
    growthvectors.SetSize(np);
    growthvectors = 0.;

    for(auto pi : mesh.Points().Range())
    {
        const auto & p = mesh[pi];
        if(p.Type() == INNERPOINT)
            continue;

        std::map<int, Vec<3>> normals;

        // calculate one normal vector per face (average with angles as weights for multiple surface elements within a face)
        for(auto sei : p2sel[pi])
        {
            const auto & sel = mesh[sei];
            auto facei = sel.GetIndex();
            if(!params.surfid.Contains(facei))
                continue;

            auto n = surfacefacs[sel.GetIndex()] * getNormal(sel);

            int itrig = sel.PNums().Pos(pi);
            itrig += sel.GetNP();
            auto v0 = (mesh[sel.PNumMod(itrig+1)] - mesh[pi]).Normalize();
            auto v1 = (mesh[sel.PNumMod(itrig-1)] - mesh[pi]).Normalize();
            if(normals.count(facei)==0)
                normals[facei] = {0.,0.,0.};
            normals[facei] += acos(v0*v1)*n;
        }

        for(auto & [facei, n] : normals)
            n *= 1.0/n.Length();

        // combine normal vectors for each face to keep uniform distances
        auto & np = growthvectors[pi];
        ArrayMem<Vec<3>, 3> ns;
        for (auto &[facei, n] : normals) {
          ns.Append(n);
        }

        ArrayMem<Vec<3>, 3> removed;
        // reduce to full rank of max 3
        while(true)
          {
            if(ns.Size() <= 1)
              break;
            if(ns.Size() == 2 && ns[0] * ns[1] < 1 - 1e-6)
              break;
            if (ns.Size() == 3)
              {
                DenseMatrix mat(3,3);
                for(auto i : Range(3))
                  for(auto j : Range(3))
                    mat(i,j) = ns[i][j];
                if(fabs(mat.Det()) > 1e-6)
                  break;
              }
            int maxpos1;
            int maxpos2;
            double val = 0;
            for (auto i : Range(ns))
              {
                for (auto j : Range(i + 1, ns.Size()))
                  {
                    double ip = ns[i] * ns[j];
                    if(ip > val)
                      {
                        val = ip;
                        maxpos1 = i;
                        maxpos2 = j;
                      }
                  }
              }
            removed.Append(ns[maxpos1]);
            removed.Append(ns[maxpos2]);
            ns[maxpos1] = 0.5 * (ns[maxpos1] + ns[maxpos2]);
            ns.DeleteElement(maxpos2);
          }

        if(ns.Size() == 0)
          continue;
        if(ns.Size() == 1)
          np = ns[0];
        else if(ns.Size() == 2)
          {
            np = ns[0];
            auto n = ns[1];
            auto npn = np * n;
            auto npnp = np * np;
            auto nn = n * n;
            if(nn-npn*npn/npnp == 0) { np = n; continue; }
            np += (nn - npn)/(nn - npn*npn/npnp) * (n - npn/npnp * np);
          }
        else // ns.Size() == 3
          {
            DenseMatrix mat(3,3);
            for(auto i : Range(3))
              for(auto j : Range(3))
                mat(i, j) = ns[i] * ns[j];
            Vector rhs(3);
            rhs = 1.;
            Vector res(3);
            DenseMatrix inv(3, ns.Size());
            CalcInverse(mat, inv);
            inv.Mult(rhs, res);
            for(auto i : Range(ns))
              np += res[i] * ns[i];
          }
        for(auto& n : removed)
          if(n * np < 0)
            cout << "WARNING: Growth vector at point " << pi << " in opposite direction to face normal!" << endl << "Growthvector = " << np << ", face normal = " << n << endl;
    }
  }

  Array<Array<pair<SegmentIndex, int>>, SegmentIndex> BoundaryLayerTool :: BuildSegMap()
  {
    // Bit array to keep track of segments already processed
    BitArray segs_done(nseg+1);
    segs_done.Clear();

    // map for all segments with same points
    // points to pair of SegmentIndex, int
    // int is type of other segment, either:
    // 0 == adjacent surface grows layer
    // 1 == adjacent surface doesn't grow layer, but layer ends on it
    // 2 == adjacent surface is interior surface that ends on layer
    // 3 == adjacent surface is exterior surface that ends on layer (not allowed yet)
    Array<Array<pair<SegmentIndex, int>>, SegmentIndex> segmap(segments.Size());

    // moved segments
    is_edge_moved.SetSize(max_edge_nr+1);
    is_edge_moved = false;

    // boundaries to project endings to
    is_boundary_projected.SetSize(nfd_old+1);
    is_boundary_projected.Clear();
    is_boundary_moved.SetSize(nfd_old+1);
    is_boundary_moved.Clear();

    for(auto si : Range(segments))
      {
        if(segs_done[si]) continue;
        const auto& segi = segments[si];
        if(si_map[segi.si] == -1) continue;
        segs_done.SetBit(si);
        segmap[si].Append(make_pair(si, 0));
        moved_segs.Append(si);
        is_edge_moved.SetBit(segi.edgenr);
        for(auto sj : Range(segments))
          {
            if(segs_done.Test(sj)) continue;
            const auto& segj = segments[sj];
            if((segi[0] == segj[0] && segi[1] == segj[1]) ||
               (segi[0] == segj[1] && segi[1] == segj[0]))
              {
                segs_done.SetBit(sj);
                int type;
                if(si_map[segj.si] != -1)
                  type = 0;
                else if(const auto& fd = mesh.GetFaceDescriptor(segj.si); domains.Test(fd.DomainIn()) && domains.Test(fd.DomainOut()))
                  {
                    type = 2;
                    if(fd.DomainIn() == 0 || fd.DomainOut() == 0)
                        is_boundary_projected.SetBit(segj.si);
                  }
                else if(const auto& fd = mesh.GetFaceDescriptor(segj.si); !domains.Test(fd.DomainIn()) && !domains.Test(fd.DomainOut()))
                  {
                    type = 3;
                    is_boundary_moved.SetBit(segj.si);
                  }
                else
                  {
                    type = 1;
                    // in case 1 we project the growthvector onto the surface
                    is_boundary_projected.SetBit(segj.si);
                  }
                segmap[si].Append(make_pair(sj, type));
              }
          }
      }

    return segmap;
  }

  BitArray BoundaryLayerTool :: ProjectGrowthVectorsOnSurface()
  {
    BitArray in_surface_direction(nfd_old+1);
    in_surface_direction.Clear();
    // project growthvector on surface for inner angles
    if(params.grow_edges)
      {
        for(const auto& sel : mesh.SurfaceElements())
          if(is_boundary_projected.Test(sel.GetIndex()))
            {
              auto n = getNormal(sel);
              for(auto i : Range(sel.PNums()))
                {
                  auto pi = sel.PNums()[i];
                  if(growthvectors[pi].Length2() == 0.)
                    continue;
                  auto next = sel.PNums()[(i+1)%sel.GetNV()];
                  auto prev = sel.PNums()[i == 0 ? sel.GetNV()-1 : i-1];
                  auto v1 = (mesh[next] - mesh[pi]).Normalize();
                  auto v2 = (mesh[prev] - mesh[pi]).Normalize();
                  auto v3 = growthvectors[pi];
                  v3.Normalize();
                  auto tol = v1.Length() * 1e-12;
                  if((v1 * v3 > -tol) && (v2 * v3 > -tol))
                    in_surface_direction.SetBit(sel.GetIndex());
                  else
                    continue;

                  if(!params.project_boundaries.Contains(sel.GetIndex()))
                    continue;
                  auto& g = growthvectors[pi];
                  auto ng = n * g;
                  auto gg = g * g;
                  auto nn = n * n;
                  // if(fabs(ng*ng-nn*gg) < 1e-12 || fabs(ng) < 1e-12) continue;
                  auto a = -ng*ng/(ng*ng-nn * gg);
                  auto b = ng*gg/(ng*ng-nn*gg);
                  g += a*g + b*n;
                }
            }
      }
    else
      {
        for(const auto& seg : segments)
          {
            int count = 0;
            for(const auto& seg2 : segments)
              if(((seg[0] == seg2[0] && seg[1] == seg2[1]) || (seg[0] == seg2[1] && seg[1] == seg2[0])) && params.surfid.Contains(seg2.si))
                count++;
            if(count == 1)
              {
                growthvectors[seg[0]] = {0., 0., 0.};
                growthvectors[seg[1]] = {0., 0., 0.};
              }
          }
      }

        return in_surface_direction;
    }

  void BoundaryLayerTool :: InterpolateGrowthVectors()
  {
    // interpolate tangential component of growth vector along edge
    for(auto edgenr : Range(max_edge_nr))
      {
        // if(!is_edge_moved[edgenr+1]) continue;

        // build sorted list of edge
        Array<PointIndex> points;
        // find first vertex on edge
        double edge_len = 0.;
        auto is_end_point = [&] (PointIndex pi)
        {
          // if(mesh[pi].Type() == FIXEDPOINT)
          //   return true;
          // return false;
            auto segs = topo.GetVertexSegments(pi);
            auto first_edgenr = mesh[segs[0]].edgenr;
            for(auto segi : segs)
                if(mesh[segi].edgenr != first_edgenr)
                    return true;
            return false;
        };

        bool any_grows = false;
        
        for(const auto& seg : segments)
          {
            if(seg.edgenr-1 == edgenr)
              {
                if(growthvectors[seg[0]].Length2() != 0 ||
                   growthvectors[seg[1]].Length2() != 0)
                  any_grows = true;
                if(points.Size() == 0 && is_end_point(seg[0]))
                  {
                    points.Append(seg[0]);
                    points.Append(seg[1]);
                    edge_len += (mesh[seg[1]] - mesh[seg[0]]).Length();
                  }
              }
          }

        if(!any_grows)
          continue;

        if(!points.Size())
          throw Exception("Could not find startpoint for edge " + ToString(edgenr));

        while(true)
          {
            bool point_found = false;
            for(auto si : topo.GetVertexSegments(points.Last()))
              {
                const auto& seg = mesh[si];
                if(seg.edgenr-1 != edgenr)
                    continue;
                if(seg[0] == points.Last() && points[points.Size()-2] !=seg[1])
                  {
                    edge_len += (mesh[points.Last()] - mesh[seg[1]]).Length();
                    points.Append(seg[1]);
                    point_found = true;
                    break;
                  }
                else if(seg[1] == points.Last() &&
                        points[points.Size()-2] != seg[0])
                  {
                    edge_len += (mesh[points.Last()] - mesh[seg[0]]).Length();
                    points.Append(seg[0]);
                    point_found = true;
                    break;
                  }
              }
            if(is_end_point(points.Last()))
              break;
            if(!point_found)
              {
                throw Exception(string("Could not find connected list of line segments for edge ") + edgenr);
              }
          }

        if(growthvectors[points[0]].Length2() == 0 &&
           growthvectors[points.Last()].Length2() == 0)
          continue;

        // tangential part of growth vectors
        auto t1 = (mesh[points[1]]-mesh[points[0]]).Normalize();
        auto gt1 = growthvectors[points[0]] * t1 * t1;
        auto t2 = (mesh[points.Last()]-mesh[points[points.Size()-2]]).Normalize();
        auto gt2 = growthvectors[points.Last()] * t2 * t2;

        if(!is_edge_moved[edgenr+1])
          {
            if(growthvectors[points[0]] * (mesh[points[1]] - mesh[points[0]]) < 0)
              gt1 = 0.;
            if(growthvectors[points.Last()] * (mesh[points[points.Size()-2]] - mesh[points.Last()]) < 0)
              gt2 = 0.;
          }

        double len = 0.;
        for(size_t i = 1; i < points.Size()-1; i++)
          {
            auto pi = points[i];
            len += (mesh[pi] - mesh[points[i-1]]).Length();
            auto t = getEdgeTangent(pi, edgenr);
            auto lam = len/edge_len;
            auto interpol = (1-lam) * (gt1 * t) * t + lam * (gt2 * t) * t;
            growthvectors[pi] += interpol;
          }
      }

    InterpolateSurfaceGrowthVectors();
  }

  void BoundaryLayerTool :: InsertNewElements( FlatArray<Array<pair<SegmentIndex, int>>, SegmentIndex> segmap, const BitArray & in_surface_direction )
  {
    static Timer timer("BoundaryLayerTool::InsertNewElements"); RegionTimer rt(timer);
    Array<Array<PointIndex>, PointIndex> mapto(np);
    // insert new points
    for (PointIndex pi = 1; pi <= np; pi++)
      if (growthvectors[pi].Length2() != 0)
        {
          Point<3> p = mesh[pi];
          for(auto i : Range(params.heights))
            {
              p += params.heights[i] * growthvectors[pi];
              mapto[pi].Append(mesh.AddPoint(p));
            }
        }

    // add 2d quads on required surfaces
    map<pair<PointIndex, PointIndex>, int> seg2edge;
    if(params.grow_edges)
      {
        for(auto sei : moved_segs)
          {
            // copy here since we will add segments and this would
            // invalidate a reference!
            auto segi = segments[sei];
            for(auto [sej, type] : segmap[sei])
              {
                auto segj = segments[sej];
                if(type == 0)
                  {
                    Segment s;
                    s[0] = mapto[segj[0]].Last();
                    s[1] = mapto[segj[1]].Last();
                    s[2] = PointIndex::INVALID;
                    auto pair = s[0] < s[1] ? make_pair(s[0], s[1]) : make_pair(s[1], s[0]);
                    if(seg2edge.find(pair) == seg2edge.end())
                      seg2edge[pair] = ++max_edge_nr;
                    s.edgenr = seg2edge[pair];
                    s.si = si_map[segj.si];
                    new_segments.Append(s);
                  }
                // here we need to grow the quad elements
                else if(type == 1)
                  {
                    PointIndex pp1 = segj[1];
                    PointIndex pp2 = segj[0];
                    if(in_surface_direction.Test(segj.si))
                      {
                        Swap(pp1, pp2);
                        is_boundary_moved.SetBit(segj.si);
                      }
                    PointIndex p1 = pp1;
                    PointIndex p2 = pp2;
                    PointIndex p3, p4;
                    Segment s0;
                    s0[0] = p1;
                    s0[1] = p2;
                    s0[2] = PointIndex::INVALID;
                    s0.edgenr = segj.edgenr;
                    s0.si = segj.si;
                    new_segments.Append(s0);

                    for(auto i : Range(params.heights))
                      {
                        Element2d sel(QUAD);
                        p3 = mapto[pp2][i];
                        p4 = mapto[pp1][i];
                        sel[0] = p1;
                        sel[1] = p2;
                        sel[2] = p3;
                        sel[3] = p4;
                        for(auto i : Range(4))
                        {
                            sel.GeomInfo()[i].u = 0.0;
                            sel.GeomInfo()[i].v = 0.0;
                        }
                        sel.SetIndex(segj.si);
                        mesh.AddSurfaceElement(sel);

                        // TODO: Too many, would be enough to only add outermost ones
                        Segment s1;
                        s1[0] = p2;
                        s1[1] = p3;
                        s1[2] = PointIndex::INVALID;
                        auto pair = make_pair(p2, p3);
                        if(seg2edge.find(pair) == seg2edge.end())
                          seg2edge[pair] = ++max_edge_nr;
                        s1.edgenr = seg2edge[pair];
                        s1.si = segj.si;
                        new_segments.Append(s1);
                        Segment s2;
                        s2[0] = p4;
                        s2[1] = p1;
                        s2[2] = PointIndex::INVALID;
                        pair = make_pair(p1, p4);
                        if(seg2edge.find(pair) == seg2edge.end())
                          seg2edge[pair] = ++max_edge_nr;
                        s2.edgenr = seg2edge[pair];
                        s2.si = segj.si;
                        new_segments.Append(s2);
                        p1 = p4;
                        p2 = p3;
                      }
                    Segment s3;
                    s3[0] = p3;
                    s3[1] = p4;
                    s3[2] = PointIndex::INVALID;
                    auto pair = p3 < p4 ? make_pair(p3, p4) : make_pair(p4, p3);
                    if(seg2edge.find(pair) == seg2edge.end())
                      seg2edge[pair] = ++max_edge_nr;
                    s3.edgenr = seg2edge[pair];
                    s3.si = segj.si;
                    new_segments.Append(s3);
                  }
              }
          }
      }

    BitArray fixed_points(np+1);
    fixed_points.Clear();
    BitArray moveboundarypoint(np+1);
    moveboundarypoint.Clear();
    for(SurfaceElementIndex si = 0; si < nse; si++)
      {
        // copy because surfaceels array will be resized!
        auto sel = mesh[si];
        if(si_map[sel.GetIndex()] != -1)
          {
            Array<PointIndex> points(sel.PNums());
            if(surfacefacs[sel.GetIndex()] > 0) Swap(points[0], points[2]);
            for(auto j : Range(params.heights))
              {
                auto eltype = points.Size() == 3 ? PRISM : HEX;
                Element el(eltype);
                for(auto i : Range(points))
                    el[i] = points[i];
                for(auto i : Range(points))
                  points[i] = mapto[sel.PNums()[i]][j];
                if(surfacefacs[sel.GetIndex()] > 0) Swap(points[0], points[2]);
                for(auto i : Range(points))
                  el[sel.PNums().Size() + i] = points[i];
                el.SetIndex(new_mat_nrs[sel.GetIndex()]);
                mesh.AddVolumeElement(el);
              }
            Element2d newel = sel;
            for(auto& p : newel.PNums())
              p = mapto[p].Last();
            newel.SetIndex(si_map[sel.GetIndex()]);
            mesh.AddSurfaceElement(newel);
          }
        else
          {
            bool has_moved = false;
            for(auto p : sel.PNums())
              if(mapto[p].Size())
                has_moved = true;
            if(has_moved)
              for(auto p : sel.PNums())
                {
                  if(!mapto[p].Size())
                    {
                      fixed_points.SetBit(p);
                      if(is_boundary_moved.Test(sel.GetIndex()))
                        moveboundarypoint.SetBit(p);
                    }
                }
          }
        if(is_boundary_moved.Test(sel.GetIndex()))
          {
            for(auto& p : mesh[si].PNums())
              if(mapto[p].Size())
                p = mapto[p].Last();
          }
      }

    for(SegmentIndex sei = 0; sei < nseg; sei++)
      {
        auto& seg = segments[sei];
        if(is_boundary_moved.Test(seg.si))
          for(auto& p : seg.PNums())
            if(mapto[p].Size())
              p = mapto[p].Last();
      }

    for(ElementIndex ei = 0; ei < ne; ei++)
      {
        auto el = mesh[ei];
        ArrayMem<PointIndex,4> fixed;
        ArrayMem<PointIndex,4> moved;
        bool moved_bnd = false;
        for(const auto& p : el.PNums())
          {
            if(fixed_points.Test(p))
              fixed.Append(p);
            if(mapto[p].Size())
              moved.Append(p);
            if(moveboundarypoint.Test(p))
              moved_bnd = true;
          }

        bool do_move, do_insert;
        if(domains.Test(el.GetIndex()))
          {
            do_move = fixed.Size() && moved_bnd;
            do_insert = do_move;
          }
        else
          {
            do_move = !fixed.Size() || moved_bnd;
            do_insert = !do_move;
          }

        if(do_move)
          {
            for(auto& p : mesh[ei].PNums())
              if(mapto[p].Size())
                p = mapto[p].Last();
          }
        if(do_insert)
          {
            if(el.GetType() == TET)
              {
                if(moved.Size() == 3) // inner corner
                  {
                    PointIndex p1 = moved[0];
                    PointIndex p2 = moved[1];
                    PointIndex p3 = moved[2];
                    auto v1 = mesh[p1];
                    auto n = Cross(mesh[p2]-v1, mesh[p3]-v1);
                    auto d = mesh[mapto[p1][0]] - v1;
                    if(n*d > 0)
                      Swap(p2,p3);
                    PointIndex p4 = p1;
                    PointIndex p5 = p2;
                    PointIndex p6 = p3;
                    for(auto i : Range(params.heights))
                      {
                        Element nel(PRISM);
                        nel[0] = p4; nel[1] = p5; nel[2] = p6;
                        p4 = mapto[p1][i]; p5 = mapto[p2][i]; p6 = mapto[p3][i];
                        nel[3] = p4; nel[4] = p5; nel[5] = p6;
                        nel.SetIndex(el.GetIndex());
                        mesh.AddVolumeElement(nel);
                      }
                  }
                if(moved.Size() == 2)
                  {
                    if(fixed.Size() == 1)
                      {
                        PointIndex p1 = moved[0];
                        PointIndex p2 = moved[1];
                        for(auto i : Range(params.heights))
                          {
                            PointIndex p3 = mapto[moved[1]][i];
                            PointIndex p4 = mapto[moved[0]][i];
                            Element nel(PYRAMID);
                            nel[0] = p1;
                            nel[1] = p2;
                            nel[2] = p3;
                            nel[3] = p4;
                            nel[4] = el[0] + el[1] + el[2] + el[3] - fixed[0] - moved[0] - moved[1];
                            if(Cross(mesh[p2]-mesh[p1], mesh[p4]-mesh[p1]) * (mesh[nel[4]]-mesh[nel[1]]) > 0)
                              Swap(nel[1], nel[3]);
                            nel.SetIndex(el.GetIndex());
                            mesh.AddVolumeElement(nel);
                            p1 = p4;
                            p2 = p3;
                          }
                      }
                  }
                if(moved.Size() == 1 && fixed.Size() == 1)
                  {
                    PointIndex p1 = moved[0];
                    for(auto i : Range(params.heights))
                      {
                        Element nel = el;
                        PointIndex p2 = mapto[moved[0]][i];
                        for(auto& p : nel.PNums())
                          {
                            if(p == moved[0])
                              p = p1;
                            else if(p == fixed[0])
                              p = p2;
                          }
                        p1 = p2;
                        mesh.AddVolumeElement(nel);
                      }
                  }
              }
            else if(el.GetType() == PYRAMID)
              {
                if(moved.Size() == 2)
                  {
                    if(fixed.Size() != 2)
                      throw Exception("This case is not implemented yet! Fixed size = " + ToString(fixed.Size()));
                    PointIndex p1 = moved[0];
                    PointIndex p2 = moved[1];
                    for(auto i : Range(params.heights))
                      {
                        PointIndex p3 = mapto[moved[1]][i];
                        PointIndex p4 = mapto[moved[0]][i];
                        Element nel(PYRAMID);
                        nel[0] = p1;
                        nel[1] = p2;
                        nel[2] = p3;
                        nel[3] = p4;
                        nel[4] = el[0] + el[1] + el[2] + el[3] + el[4] - fixed[0] - fixed[1] - moved[0] - moved[1];
                        if(Cross(mesh[p2] - mesh[p1], mesh[p4]-mesh[p1]) * (mesh[nel[4]]-mesh[nel[1]]) > 0)
                          Swap(nel[1], nel[3]);
                        nel.SetIndex(el.GetIndex());
                        mesh.AddVolumeElement(nel);
                        p1 = p4;
                        p2 = p3;
                      }
                  }
                else if(moved.Size() == 1)
                  throw Exception("This case is not implemented yet!");
              }
            else
              throw Exception("Boundarylayer only implemented for tets and pyramids outside yet!");
          }
      }
  }

  void BoundaryLayerTool :: SetDomInOut()
  {
    for(auto i : Range(1, nfd_old+1))
      if(si_map[i] != -1)
        {
          if(auto dom = mesh.GetFaceDescriptor(si_map[i]).DomainIn(); dom > ndom_old)
            mesh.GetFaceDescriptor(i).SetDomainOut(dom);
          else
            mesh.GetFaceDescriptor(i).SetDomainIn(mesh.GetFaceDescriptor(si_map[i]).DomainOut());
        }
  }

  void BoundaryLayerTool :: AddSegments()
  {
    if(have_single_segments)
        MergeAndAddSegments(mesh, new_segments);
    else
    {
      for(auto & seg : new_segments)
        mesh.AddSegment(seg);
    }
  }

  void BoundaryLayerTool :: FixVolumeElements()
  {
      static Timer timer("BoundaryLayerTool::FixVolumeElements"); RegionTimer rt(timer);
      BitArray is_inner_point(mesh.GetNP()+1);
      is_inner_point.Clear();

      auto changed_domains = domains;
      if(!params.outside)
          changed_domains.Invert();

      for(ElementIndex ei : Range(ne))
          if(changed_domains.Test(mesh[ei].GetIndex()))
              for(auto pi : mesh[ei].PNums())
                  if(mesh[pi].Type() == INNERPOINT)
                      is_inner_point.SetBit(pi);

      Array<PointIndex> points;
      for(auto pi : mesh.Points().Range())
          if(is_inner_point.Test(pi))
              points.Append(pi);

      auto p2el = mesh.CreatePoint2ElementTable(is_inner_point);

      // smooth growth vectors to shift additional element layers to the inside and fix flipped tets
      for(auto step : Range(10))
      {
          for(auto pi : points)
          {
              Vec<3> average_gw = 0.0;
              auto & els = p2el[pi];
              size_t cnt = 0;
              for(auto ei : els)
                  if(ei<ne)
                      for(auto pi1 : mesh[ei].PNums())
                          if(pi1<=np)
                          {
                              average_gw += growthvectors[pi1];
                              cnt++;
                          }
              growthvectors[pi] = 1.0/cnt * average_gw;
          }
      }
      
      for(auto pi : points)
      {
          mesh[pi] += height * growthvectors[pi];
          growthvectors[pi] = 0.0;
      }
  }

  void BoundaryLayerTool :: Perform()
  {
      CreateNewFaceDescriptors();
      CalculateGrowthVectors();
      auto segmap = BuildSegMap();

      auto in_surface_direction = ProjectGrowthVectorsOnSurface();
      InterpolateGrowthVectors();

      if(params.limit_growth_vectors)
        LimitGrowthVectorLengths();
      FixVolumeElements();
      InsertNewElements(segmap, in_surface_direction);
      SetDomInOut();
      AddSegments();
      mesh.GetTopology().ClearEdges();
      mesh.SetNextMajorTimeStamp();
      mesh.UpdateTopology();
      MeshingParameters mp;
      mp.optimize3d ="m";
      mp.optsteps3d = 4;
      OptimizeVolume(mp, mesh);
  }


  void GenerateBoundaryLayer(Mesh& mesh, const BoundaryLayerParameters& blp)
  {
    static Timer timer("Create Boundarylayers");
    RegionTimer regt(timer);

    BoundaryLayerTool tool(mesh, blp);
    tool.Perform();
  }

  void AddDirection( Vec<3> & a, Vec<3> b )
  {
     if(a.Length2()==0.)
     {
        a = b;
        return;
     }

     if(b.Length2()==0.)
        return;

     auto ab = a * b;
     if(fabs(ab)>1-1e-8)
        return;

     Mat<2> m;
     m(0,0) = a[0];
     m(0,1) = a[1];
     m(1,0) = b[0];
     m(1,1) = b[1];
     Vec<2> lam;
     Vec<2> rhs;
     rhs[0] = a[0]-b[0];
     rhs[1] = a[1]-b[1];

     const auto Dot = [](Vec<3> a, Vec<3> b)
     { return a[0]*b[0] + a[1]*b[1] + a[2]*b[2]; };

     rhs[0] = Dot(a,a);
     rhs[1] = Dot(b,b);

     m.Solve(rhs, lam);
     a[0] = lam[0];
     a[1] = lam[1];
     a[2] = 0.0;
     return;
  }

  static void Generate2dMesh( Mesh & mesh, int domain )
  {
     Box<3> box{Box<3>::EMPTY_BOX};
     for(const auto & seg : mesh.LineSegments())
        if (seg.domin == domain || seg.domout == domain)
           for (auto pi : {seg[0], seg[1]})
              box.Add(mesh[pi]);

     MeshingParameters mp;
     Meshing2 meshing (*mesh.GetGeometry(), mp, box);

     Array<PointIndex, PointIndex> compress(mesh.GetNP());
     compress = PointIndex::INVALID;

     PointIndex cnt = PointIndex::BASE;

     auto p2sel = mesh.CreatePoint2SurfaceElementTable();
     PointGeomInfo gi;
     gi.u = 0.0;
     gi.v = 0.0;
     gi.trignum = domain;
     for(auto seg : mesh.LineSegments())
     {
         if(seg.domin == domain || seg.domout == domain)
         for (auto pi : {seg[0], seg[1]})
            if (compress[pi]==PointIndex{PointIndex::INVALID})
            {
               meshing.AddPoint(mesh[pi], pi);
               compress[pi] = cnt++;
            }
         if(seg.domin == domain)
             meshing.AddBoundaryElement (compress[seg[0]], compress[seg[1]], gi, gi);
         if(seg.domout == domain)
             meshing.AddBoundaryElement (compress[seg[1]], compress[seg[0]], gi, gi);
     }

     auto oldnf = mesh.GetNSE();
     auto res = meshing.GenerateMesh (mesh, mp, mp.maxh, domain);
     for (SurfaceElementIndex sei : Range(oldnf, mesh.GetNSE()))
        mesh[sei].SetIndex (domain);

     int hsteps = mp.optsteps2d;

     const char * optstr = mp.optimize2d.c_str();
     MeshOptimize2d meshopt(mesh);
     meshopt.SetFaceIndex(domain);
     meshopt.SetMetricWeight (mp.elsizeweight);
     for (size_t j = 1; j <= strlen(optstr); j++)
     {
        switch (optstr[j-1])
        {
           case 's':
              {  // topological swap
                 meshopt.EdgeSwapping (0);
                 break;
              }
           case 'S':
              {  // metric swap
                 meshopt.EdgeSwapping (1);
                 break;
              }
           case 'm':
              {
                 meshopt.ImproveMesh(mp);
                 break;
              }
           case 'c':
              {
                 meshopt.CombineImprove();
                 break;
              }
           default:
              cerr << "Optimization code " << optstr[j-1] << " not defined" << endl;
        }
     }

     mesh.Compress();
     mesh.CalcSurfacesOfNode();
     mesh.OrderElements();
     mesh.SetNextMajorTimeStamp();
  }

  int GenerateBoundaryLayer2 (Mesh & mesh, int domain, const Array<double> & thicknesses, bool should_make_new_domain, const Array<int> & boundaries)
  {
     mesh.GetTopology().SetBuildVertex2Element(true);
     mesh.UpdateTopology();
     const auto & line_segments = mesh.LineSegments();
     SegmentIndex first_new_seg = mesh.LineSegments().Range().Next();

     int np = mesh.GetNP();
     int nseg = line_segments.Size();
     int ne = mesh.GetNSE();
     mesh.UpdateTopology();

     double total_thickness = 0.0;
     for(auto thickness : thicknesses)
        total_thickness += thickness;

     Array<Array<PointIndex>, PointIndex> mapto(np);

     // Bit array to keep track of segments already processed
     BitArray segs_done(nseg);
     segs_done.Clear();

     // moved segments
     Array<SegmentIndex> moved_segs;

     Array<Vec<3>, PointIndex> growthvectors(np);
     growthvectors = 0.;

     auto & meshtopo = mesh.GetTopology();

     Array<SegmentIndex> segments;

    // surface index map
    Array<int> si_map(mesh.GetNFD()+2);
    si_map = -1;

    int fd_old = mesh.GetNFD();

    int max_edge_nr = -1;
    int max_domain = -1;

    for(const auto& seg : line_segments)
    {
      if(seg.epgeominfo[0].edgenr > max_edge_nr)
        max_edge_nr = seg.epgeominfo[0].edgenr;
      if(seg.domin > max_domain)
         max_domain = seg.domin;
      if(seg.domout > max_domain)
         max_domain = seg.domout;
    }

    int new_domain = max_domain+1;

    BitArray active_boundaries(max_edge_nr+1);
    BitArray active_segments(nseg);
    active_boundaries.Clear();
    active_segments.Clear();

    if(boundaries.Size() == 0)
       active_boundaries.Set();
    else
       for(auto edgenr : boundaries)
          active_boundaries.SetBit(edgenr);

    for(auto segi : Range(line_segments))
    {
       const auto seg = line_segments[segi];
       if(active_boundaries.Test(seg.epgeominfo[0].edgenr) && (seg.domin==domain || seg.domout==domain))
          active_segments.SetBit(segi);
    }

    {
        FaceDescriptor new_fd(0, 0, 0, -1);
        new_fd.SetBCProperty(new_domain);
        int new_fd_index = mesh.AddFaceDescriptor(new_fd);
        if(should_make_new_domain)
           mesh.SetBCName(new_domain-1, "mapped_" + mesh.GetBCName(domain-1));
    }

    for(auto segi : Range(line_segments))
      {
        if(segs_done[segi]) continue;
        segs_done.SetBit(segi);
        const auto& seg = line_segments[segi];
        if(seg.domin != domain && seg.domout != domain) continue;
        if(!active_boundaries.Test(seg.epgeominfo[0].edgenr))
           continue;
        moved_segs.Append(segi);
      }

     // calculate growth vectors (average normal vectors of adjacent segments at each point)
     for (auto si : moved_segs)
     {
       auto & seg = line_segments[si];

       auto n = mesh[seg[1]] - mesh[seg[0]];
       n = {-n[1], n[0], 0};
       n.Normalize();

       if(seg.domout == domain)
           n = -n;

       AddDirection(growthvectors[seg[0]], n);
       AddDirection(growthvectors[seg[1]], n);
     }

     //////////////////////////////////////////////////////////////////////////
     // average growthvectors along straight lines to avoid overlaps in corners
     BitArray points_done(np+1);
     points_done.Clear();

     for(auto si : moved_segs)
     {
        auto current_seg = line_segments[si];
        auto current_si = si;

        auto first = current_seg[0];
        auto current = -1;
        auto next =  current_seg[1];

        if(points_done.Test(first))
           continue;

        Array<PointIndex> chain;
        chain.Append(first);

        // first find closed loops of segments
        while(next != current && next != first)
        {
           current = next;
           points_done.SetBit(current);
           chain.Append(current);
           for(auto sj : meshtopo.GetVertexSegments( current ))
           {
              if(!active_segments.Test(sj))
                 continue;

              if(sj!=current_si)
              {
                 current_si = sj;
                 current_seg = mesh[sj];

                 next = current_seg[0] + current_seg[1] - current;
                 break;
              }
           }
        }

        auto ifirst = 0;
        auto n = chain.Size();

        // angle of adjacent segments at points a[i-1], a[i], a[i+1]
        auto getAngle = [&mesh, &growthvectors] (FlatArray<PointIndex> a, size_t i)
        {
           auto n = a.Size();
           auto v0 = growthvectors[a[(i+n-1)%n]];
           auto v1 = growthvectors[a[i]];
           auto v2 = growthvectors[a[(i+1)%n]];

           auto p0 = mesh[a[(i+n-1)%n]];
           auto p1 = mesh[a[i]];
           auto p2 = mesh[a[(i+1)%n]];

           v0 = p1-p0;
           v1 = p2-p1;

           auto angle = abs(atan2(v1[0], v1[1]) - atan2(v0[0], v0[1]));
           if(angle>M_PI)
              angle = 2*M_PI-angle;

           return angle;
        };

        // find first corner point
        while(getAngle(chain, ifirst) < 1e-5 )
           ifirst = (ifirst+1)%n;

        // Copy points of closed loop in correct order, starting with a corner
        Array<PointIndex> pis(n+1);
        pis.Range(0, n-ifirst) = chain.Range(ifirst, n);
        pis.Range(n-ifirst, n) = chain.Range(0, n-ifirst);
        pis[n] = pis[0];

        Array<double> lengths(n);

        for(auto i : Range(n))
           lengths[i] = (mesh[pis[(i+1)%n]] - mesh[pis[i]]).Length();

        auto averageGrowthVectors = [&] (size_t first, size_t last)
        {
           if(first+1 >= last)
              return;

           double total_len = 0.0;
           for(auto l : lengths.Range(first, last))
              total_len += l;

           double len = lengths[first];
           auto v0 = growthvectors[pis[first]];
           auto v1 = growthvectors[pis[last]];

           for(auto i : Range(first+1, last))
           {
              auto pi = pis[i];
              growthvectors[pi] = (len/total_len)*v1 + (1.0-len/total_len)*v0;
              len += lengths[i];
           }
        };

        auto icurrent = 0;

        while(icurrent<n)
        {
           auto ilast = icurrent+1;

           while(getAngle(pis, ilast) < 1e-5 && ilast < n)
              ilast++;

           // found straight line -> average growth vectors between end points
           if(icurrent!=ilast)
              averageGrowthVectors(icurrent, ilast);

           icurrent = ilast;
        }
     }

     //////////////////////////////////////////////////////////////////////
     // reduce growthvectors where necessary to avoid overlaps/slim regions
     const auto getSegmentBox = [&] (SegmentIndex segi)
     {
        PointIndex pi0=mesh[segi][0], pi1=mesh[segi][1];
        Box<3> box( mesh[pi0], mesh[pi1] );
        box.Add( mesh[pi0]+growthvectors[pi0] );
        box.Add( mesh[pi1]+growthvectors[pi1] );
        return box;
     };

     Array<double, PointIndex> growth(np);
     growth = 1.0;

     const auto Dot = [](auto a, auto b)
     { return a[0]*b[0] + a[1]*b[1] + a[2]*b[2]; };

     const auto restrictGrowthVectors = [&] (SegmentIndex segi0, SegmentIndex segi1)
     {
        if(!active_segments.Test(segi0))
           return;

        const auto & seg0 = mesh[segi0];
        const auto & seg1 = mesh[segi1];

        if( (seg0.domin != domain && seg0.domout != domain) ||
            (seg1.domin != domain && seg1.domout != domain) )
            return;

        if(segi0 == segi1)
           return;

        if(seg0[0]==seg1[0] || seg0[0]==seg1[1] || seg0[1]==seg1[0] || seg0[1] == seg1[1])
           return;

        auto n = mesh[seg0[0]] - mesh[seg0[1]];
        n = {-n[1], n[0], 0};
        n.Normalize();
        if(Dot(n, growthvectors[seg0[0]])<0) n = -n;
        if(Dot(n, growthvectors[seg0[1]])<0) n = -n;

        auto n1 = mesh[seg1[0]] - mesh[seg1[1]];
        n1 = {-n1[1], n1[0], 0};
        n1.Normalize();
        if(Dot(n1, growthvectors[seg1[0]])<0) n1 = -n;
        if(Dot(n1, growthvectors[seg1[1]])<0) n1 = -n;

        auto p10 = mesh[seg1[0]];
        auto p11 = mesh[seg1[1]];

        for ( auto pi : {seg0[0], seg0[1]} )
        {
           if(growthvectors[pi] == 0.0)
              continue;

           PointIndex pi1 = seg0[0] + seg0[1] - pi;
           auto p1 = mesh[pi1];
           auto p = mesh[pi];

           Point<3> points[] = { p10, p11, p10+total_thickness*growthvectors[seg1[0]], p11+total_thickness*growthvectors[seg1[1]], p1+total_thickness*growthvectors[pi1] };

           Vec<3> gn{ growthvectors[pi][1], -growthvectors[pi][0], 0.0 };
           if(Dot(gn, p1-p) < 0)
              gn = -gn;

           double d0 = Dot(gn, p);
           double d1 = Dot(gn, p1);
           if(d0>d1)
              Swap(d0,d1);

           bool all_left=true, all_right=true;

           for (auto i: Range(4))
           {
              auto p_other = points[i];
              auto dot = Dot(gn,p_other);
              if(dot>d0) all_left = false;
              if(dot<d1) all_right = false;
           }

           if(all_left || all_right)
              return;

           //for ( auto pi : {seg0[0], seg0[1]} )
           {
              double safety = 1.3;
              double t = safety*total_thickness;
              if(growthvectors[pi] == 0.0)
                 continue;

              Point<3> points[] = { p10, p10+t*growthvectors[seg1[0]], p11, p11+t*growthvectors[seg1[1]] };
              auto p0 = mesh[pi];
              auto p1 = p0 + t*growthvectors[pi];
              auto P2 = [](Point<3> p) { return Point<2>{p[0], p[1]}; };
              ArrayMem<pair<double, double>, 4> intersections;

              double alpha, beta;

              if(X_INTERSECTION == intersect( P2(p0), P2(p1), P2(points[0]), P2(points[2]), alpha, beta ))
                 intersections.Append({alpha, 0.0});

              if(X_INTERSECTION == intersect( P2(p0), P2(p1), P2(points[1]), P2(points[3]), alpha, beta ))
                 intersections.Append({alpha, 1.0});

              if(X_INTERSECTION == intersect( P2(p0), P2(p1), P2(points[0]), P2(points[1]), alpha, beta ))
                 intersections.Append({alpha, beta});

              if(X_INTERSECTION == intersect( P2(p0), P2(p1), P2(points[2]), P2(points[3]), alpha, beta ))
                 intersections.Append({alpha, beta});

              QuickSort(intersections);
              for(auto [alpha,beta] : intersections)
              {
                 if(!active_segments.Test(segi1))
                    growth[pi] = min(growth[pi], alpha);
                 else
                 {
                    double mean = 0.5*(alpha+beta);
                    growth[pi] = min(growth[pi], mean);
                    growth[seg1[0]] = min(growth[seg1[0]], mean);
                    growth[seg1[1]] = min(growth[seg1[1]], mean);
                 }
              }
           }
        }
     };

     Box<3> box(Box<3>::EMPTY_BOX);
     for (auto segi : Range(mesh.LineSegments()))
     {
        auto segbox = getSegmentBox( segi );
        box.Add(segbox.PMin());
        box.Add(segbox.PMax());
     }
     BoxTree<3> segtree(box);

     for (auto segi : Range(mesh.LineSegments()))
     {
        auto p2 = [](Point<3> p) { return Point<2>{p[0], p[1]}; };

        auto seg = line_segments[segi];
        double alpha,beta;
        intersect( p2(mesh[seg[0]]), p2(mesh[seg[0]]+total_thickness*growthvectors[seg[0]]), p2(mesh[seg[1]]), p2(mesh[seg[1]]+total_thickness*growthvectors[seg[1]]), alpha, beta );

        if(beta>0 && alpha>0 && alpha<1.1)
           growth[seg[0]] = min(growth[seg[0]], 0.8*alpha);
        if(alpha>0 && beta>0 && beta<1.1)
           growth[seg[1]] = min(growth[seg[1]], 0.8*beta);

        for (auto segj : Range(mesh.LineSegments()))
           if(segi!=segj)
              restrictGrowthVectors(segi, segj);
     }

     for( auto pi : Range(growthvectors))
        growthvectors[pi] *= growth[pi];


     // insert new points
     for(PointIndex pi : Range(mesh.Points()))
        if(growthvectors[pi].Length2()!=0)
        {

           auto & pnew = mapto[pi];
           auto dist = 0.0;
           for(auto t : thicknesses)
           {
              dist+=t;
              pnew.Append( mesh.AddPoint( mesh[pi] + dist*growthvectors[pi] ) );
              mesh[pnew.Last()].SetType(FIXEDPOINT);
           }
        }

     map<pair<PointIndex, PointIndex>, int> seg2edge;

     // insert new elements ( and move old ones )
     for(auto si : moved_segs)
     {
        auto seg = line_segments[si];

        bool swap = false;
        auto & pm0 = mapto[seg[0]];
        auto & pm1 = mapto[seg[1]];

        auto newindex = si_map[domain];

        Segment s = seg;
        s.geominfo[0] = {};
        s.geominfo[1] = {};
        s[0] = pm0.Last();
        s[1] = pm1.Last();
        s[2] = PointIndex::INVALID;
        auto pair = s[0] < s[1] ? make_pair(s[0], s[1]) : make_pair(s[1], s[0]);
        if(seg2edge.find(pair) == seg2edge.end())
           seg2edge[pair] = ++max_edge_nr;
        s.edgenr = seg2edge[pair];
        s.si = seg.si;
        mesh.AddSegment(s);

        for ( auto i : Range(thicknesses))
        {
           PointIndex pi0, pi1, pi2, pi3;

           if(i==0)
           {
              pi0 = seg[0];
              pi1 = seg[1];
           }
           else
           {
              pi0 = pm0[i-1];
              pi1 = pm1[i-1];
           }

           pi2 = pm1[i];
           pi3 = pm0[i];

           if(i==0)
           {
              auto p0 = mesh[pi0];
              auto p1 = mesh[pi1];
              auto q0 = mesh[pi2];
              auto q1 = mesh[pi3];

              Vec<2> n = {-p1[1]+p0[1], p1[0]-p0[0]};
              Vec<2> v = { q0[0]-p0[0], q0[1]-p0[1]};
              if(n[0]*v[0]+n[1]*v[1]<0)
                 swap = true;
           }

           Element2d newel;
           newel.SetType(QUAD);
           newel[0] = pi0;
           newel[1] = pi1;
           newel[2] = pi2;
           newel[3] = pi3;
           newel.SetIndex(new_domain);
           newel.GeomInfo() = PointGeomInfo{};

            if(swap)
            {
               Swap(newel[0], newel[1]);
               Swap(newel[2], newel[3]);
            }

           for(auto i : Range(4))
           {
               newel.GeomInfo()[i].u = 0.0;
               newel.GeomInfo()[i].v = 0.0;
           }
           mesh.AddSurfaceElement(newel);

        }
        // segment now adjacent to new 2d-domain!
        if(line_segments[si].domin == domain)
            line_segments[si].domin = new_domain;
        if(line_segments[si].domout == domain)
            line_segments[si].domout = new_domain;
     }

     for(auto pi : Range(mapto))
     {
        if(mapto[pi].Size() == 0)
           continue;
        auto pnew = mapto[pi].Last();
        for(auto old_sei : meshtopo.GetVertexSurfaceElements( pi ))
        {
           if(mesh[old_sei].GetIndex() == domain)
           {
              auto & old_el = mesh[old_sei];
              for(auto i : IntRange(old_el.GetNP()))
                 if(old_el[i]==pi)
                    old_el[i] = pnew;
           }
        }
     }

     for(auto & sel : mesh.SurfaceElements())
        if(sel.GetIndex() == domain)
           sel.Delete();

     mesh.Compress();
     mesh.CalcSurfacesOfNode();

     Generate2dMesh(mesh, domain);

     // even without new domain, we need temporarily a new domain to mesh the remaining area, without confusing the meshes with quads -> add segments temporarily and reset domain number and segments afterwards
     if(!should_make_new_domain)
     {
        // map new domain back to old one
        for(auto & sel : mesh.SurfaceElements())
           if(sel.GetIndex()==new_domain)
              sel.SetIndex(domain);

        // remove (temporary) inner segments
        for(auto segi : Range(first_new_seg, mesh.LineSegments().Range().Next()))
        {
           mesh[segi][0].Invalidate();
           mesh[segi][1].Invalidate();
        }

        for(auto segi : moved_segs)
        {
            if(mesh[segi].domin == new_domain)
                mesh[segi].domin = domain;
            if(mesh[segi].domout == new_domain)
                mesh[segi].domout = domain;
        }

        mesh.Compress();
        mesh.CalcSurfacesOfNode();
     }

     return new_domain;
   }

}