ForkMaster/netgen
1
0
Fork 0
mirror of https://github.com/NGSolve/netgen.git synced 2024-12-25 05:20:34 +05:00
Code Issues Packages Projects Releases Wiki Activity
0461899071
netgen/ng/menustat.tcl
Joachim Schoeberl 51d4a12781 change in loading ngsolve
2009-05-09 10:22:16 +00:00

1140 lines
32 KiB
Tcl
Raw Blame History

# netgen menus:
menu .ngmenu -tearoff 0 -relief raised -bd 2
. configure -menu .ngmenu
.ngmenu add cascade -label "File" -menu .ngmenu.file -underline 0
.ngmenu add cascade -label "Geometry" -menu .ngmenu.geometry -underline 0
.ngmenu add cascade -label "Mesh" -menu .ngmenu.mesh -underline 0
.ngmenu add cascade -label "View" -menu .ngmenu.view -underline 0
.ngmenu add cascade -label "Refinement" -menu .ngmenu.meshsize -underline 5
if { $userlevel == 3} {
.ngmenu add cascade -label "Special" -menu .ngmenu.special -underline 3
}
.ngmenu add cascade -label "Help" -menu .ngmenu.help -underline 0
#####################################################
# #
# Menu File #
# #
#####################################################
menu .ngmenu.file
.ngmenu.file add command -label "Load Geometry..." -accelerator "<l><g>" \
-command {
set types {
{"All Geometry types" { .stl .stlb .step .stp .geo .in2d .igs .iges .brep .in2dnew .sat} }
{"IGES Geometry" {.igs .iges} }
{"BREP OpenCascade Geometry" {.brep} }
{"STL Geometry" {.stl} }
{"Binary STL Geometry" {.stlb} }
{"STEP Geometry" {.step .stp} }
{"Geometry file" {.geo} }
{"2D Geometry" {.in2d } }
{"2D Geometry New" {.in2dnew } }
}
set ACISavailable [Ng_ACISCommand isACISavailable]
if {$ACISavailable == "yes" } {
lappend types {"ACIS Geometry" {.sat} }
}
# {"All Geometry types" {.stl .stlb .step .stp .geo .in2d .igs .iges .brep .in2dnew} }
# {"Naomi Geometry" {.nao} }
# {"New Geometry file" {.ngg} }
set file [tk_getOpenFile -filetypes $types]
if {$file != ""} {
AddRecentFile $file
Ng_LoadGeometry $file
Ng_ParseGeometry
# if { [Ng_STLInfo status]=="ERROR" } {
# tk_messageBox -message "STL ERROR: \n [Ng_STLInfo statustext]" -type ok
# }
set selectvisual geometry
Ng_SetVisParameters
redraw
wm title . [concat "$progname - " $file]
set dirname [file dirname $file]
set basefilename [file tail [file rootname $file]]
rebuildoccdialog
}
}
.ngmenu.file add command -label "Save Geometry..." \
-command {
set occgeometryloaded [Ng_OCCCommand isoccgeometryloaded]
puts $occgeometryloaded
if {$occgeometryloaded == 1 } {
set types {
{"IGES Geometry file" {.igs} }
{"STEP Geometry file" {.stp} }
{"STL Geometry file" {.stl} }
{"STL BIN Geometry file" {.stlb} }
}
} {
set types {
{"STL Geometry file" {.stl} }
{"STL BIN Geometry file" {.stlb} }
}
}
set ACISavailable [Ng_ACISCommand isACISavailable]
puts $ACISavailable
if {$ACISavailable == "yes" } {
lappend types {"ACIS Geometry" {.sat} }
}
# set file [tk_getSaveFile -filetypes $types -defaultextension ".stl" -initialdir $dirname -initialfile $basefilename ]
set file [tk_getSaveFile -filetypes $types -initialdir $dirname -initialfile $basefilename ]
if {$file != ""} {
Ng_SaveGeometry $file
}
}
.ngmenu.file add cascade -label "Recent Files" -menu .ngmenu.file.recent
menu .ngmenu.file.recent
proc AddRecentFile { filename } {
global progname
global dirname
catch { [.ngmenu.file.recent delete $filename] }
.ngmenu.file.recent insert 0 command -label $filename \
-command "AddRecentFile {$filename};
Ng_LoadGeometry {$filename};
Ng_ParseGeometry;
set selectvisual geometry;
Ng_SetVisParameters;
redraw;
wm title . [concat \" $progname - $filename \"];
set dirname {[file dirname $filename]};
set basefilename {[file tail [file rootname $filename]]};
rebuildoccdialog;"
if { [.ngmenu.file.recent index last] >= 6 } {
.ngmenu.file.recent delete last }
saveinifile;
}
loadinifile;
.ngmenu.file add separator
.ngmenu.file add command -label "Load Mesh..." -accelerator "<l><m>" \
-command {
set types {
{"Mesh file" {.vol} } }
set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]
if {$file != ""} {
AddRecentMeshFile $file;
Ng_LoadMesh $file;
set selectvisual mesh
Ng_SetVisParameters
redraw
Ng_ReadStatus;
# Ng_MeshSizeFromSurfaceMesh
set dirname [file dirname $file]
set basefilename [file tail [file rootname $file]]
}
}
# astrid
.ngmenu.file add cascade -label "Recent Meshes" -menu .ngmenu.file.recentmesh
menu .ngmenu.file.recentmesh
proc AddRecentMeshFile { filename } {
global progname
global dirname
catch { [.ngmenu.file.recentmesh delete $filename] }
.ngmenu.file.recentmesh insert 0 command -label $filename \
-command "AddRecentMeshFile {$filename};
Ng_LoadMesh {$filename};
set selectvisual mesh;
Ng_SetVisParameters;
redraw;
wm title . [concat \" $progname - $filename \"];
set dirname {[file dirname $filename]};
set basefilename {[file tail [file rootname $filename]]};
rebuildoccdialog;"
if { [.ngmenu.file.recentmesh index last] >= 6 } {
.ngmenu.file.recentmesh delete last }
savemeshinifile;
}
loadmeshinifile;
# astrid ende
.ngmenu.file add command -label "Save Mesh..." -accelerator "<s><m>" \
-command {
set types {
{"Mesh file" {.vol} } }
set file [tk_getSaveFile -filetypes $types -defaultextension ".vol" -initialfile $basefilename -initialdir $dirname ]
if {$file != ""} {
Ng_SaveMesh $file }
AddRecentMeshFile $file;
}
.ngmenu.file add command -label "Merge Mesh..." \
-command {
set types {
{"Mesh file" {.vol} } }
set file [tk_getOpenFile -filetypes $types -defaultextension ".vol"]
if {$file != ""} {
Ng_MergeMesh $file;
set selectvisual mesh
Ng_SetVisParameters
redraw
Ng_ReadStatus;
}
}
.ngmenu.file add command -label "Import Mesh..." \
-command {
set types {
{"Neutral format" {.mesh .emt} }
{"Surface mesh format" {.surf} }
{"Universal format" {.unv} }
{"Olaf format" {.emt} }
{"TET format" {.tet} }
{"Pro/ENGINEER neutral format" {.fnf} }
}
set file [tk_getOpenFile -filetypes $types ]
if {$file != ""} {
Ng_ImportMesh $file
set selectvisual mesh
Ng_SetVisParameters
redraw
Ng_ReadStatus;
}
}
.ngmenu.file add command -label "Export Mesh..." \
-command {
if { $exportfiletype == "Elmer Format" } {
set file [tk_chooseDirectory]
} else {
set file [tk_getSaveFile]
}
if {$file != ""} {
Ng_ExportMesh $file $exportfiletype
}
}
.ngmenu.file add cascade -label "Export Filetype" -menu .ngmenu.file.filetype
menu .ngmenu.file.filetype
.ngmenu.file add separator
.ngmenu.file add command -label "Save Solution..." \
-command {
set types {
{"Solution File" {.sol} }
{"VTK File" {.vtk} }
}
set file [tk_getSaveFile -filetypes $types ]
if {$file != ""} {
Ng_SaveSolution $file
}
}
#-defaultextension ".sol" ]
.ngmenu.file add command -label "Import Solution..." \
-command {
set types { {"Solution File" {.sol} } }
set file [tk_getOpenFile -filetypes $types -defaultextension ".sol" ]
if {$file != ""} {
Ng_ImportSolution $file
set selectvisual solution
Ng_SetVisParameters
redraw
}
}
set demostarttime [clock clicks -millisecond]
set stopdemo 0
proc demoredraw { } {
global demostarttime
global stopdemo
set curtime [clock clicks -millisecond]
set result [ Ng_DemoSetTime [expr $curtime - $demostarttime] ]
redraw
global videoactive
if { $videoactive == 1 } {
puts "addframe"
.ndraw Ng_VideoClip addframe
}
if { $result == 0 && $stopdemo == 0 } {
after 1 { demoredraw }
}
}
.ngmenu.file add command -label "Show Demo..." \
-command {
set types { {"Demo File" {.dem} } }
set file [tk_getOpenFile -filetypes $types -defaultextension ".dem" ]
if {$file != ""} {
Ng_ShowDemo $file
set demostarttime [clock clicks -millisecond]
set stopdemo 0
demoredraw
}
}
.ngmenu.file add separator
.ngmenu.file add command -label "Snapshot..." \
-command {
set types {
{"JPG file" {.jpg} }
{"GIF file" {.gif} }
{"PPM file" {.ppm} }
}
set file [tk_getSaveFile -filetypes $types]
# -defaultextension ".ppm"]
if {$file != ""} {
.ndraw Ng_SnapShot $file }
}
.ngmenu.file add cascade -label "Video clip" -menu .ngmenu.file.video
menu .ngmenu.file.video
set videoactive 0
.ngmenu.file.video add command -label "start..." \
-command {
set types {
{"MPG file" {.mpg} }
}
set file [tk_getSaveFile -filetypes $types]
if {$file != ""} {
.ndraw Ng_VideoClip init $file
global videoactive
set videoactive 1
}
}
.ngmenu.file.video add command -label "add frame..." \
-command {.ndraw Ng_VideoClip addframe }
.ngmenu.file.video add command -label "one cycle" \
-command {
set visoptions.redrawperiodic 1
for { set j 0 } { $j < 100 } { incr j } {
puts "j = $j"
Ng_Vis_Set time [expr (1000 * $j / 100)]
redraw
.ndraw Ng_VideoClip addframe
after 200
}
}
.ngmenu.file.video add command -label "finalize..." \
-command {
.ndraw Ng_VideoClip finalize
global videoactive
set videoactive 0
}
.ngmenu.file add command -label "Save Options" \
-command { saveoptions }
.ngmenu.file add separator
## herbert tcl load menue
.ngmenu.file add command -label "Run tests ..." \
-command { runtestdialog }
##
.ngmenu.file add separator
.ngmenu.file add command -label "Quit" -accelerator "<q>" \
-command { puts "Thank you for using $progname"; Ng_Exit; destroy . }
# exit
#####################################################
# #
# Menu Mesh #
# #
#####################################################
menu .ngmenu.mesh
.ngmenu.mesh add command -label "Generate Mesh" -accelerator "<g><m>" \
-command {
Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}
Ng_ReadStatus
set selectvisual mesh
Ng_SetVisParameters
redraw
}
.ngmenu.mesh add command -label "Stop Meshing" \
-command { Ng_StopMeshing }
.ngmenu.mesh add command -label "Meshing Options..." \
-command meshingoptionsdialog
.ngmenu.mesh add separator
.ngmenu.mesh add command -label "Delete Mesh" \
-command { Ng_New mesh; Ng_ReadStatus; redraw }
.ngmenu.mesh add command -label "Delete Vol Mesh" \
-command { Ng_DeleteVolMesh; Ng_ReadStatus; redraw }
.ngmenu.mesh add command -label "Mesh Info" \
-command {
set dim [Ng_MeshInfo dim]
set np [Ng_MeshInfo np]
set ne [Ng_MeshInfo ne]
set nse [Ng_MeshInfo nse]
set nseg [Ng_MeshInfo nseg]
set bbox [Ng_MeshInfo bbox]
tk_messageBox -message "Dimension: $dim\nPoints: $np\nElements: $ne\nSurface Els: $nse\nSegments: $nseg\nxmin [lindex $bbox 0] xmax [lindex $bbox 1]\nymin [lindex $bbox 2] ymax [lindex $bbox 3]\nzmin [lindex $bbox 4] zmax [lindex $bbox 5]"
}
.ngmenu.mesh add command -label "Mesh Quality" \
-command {
set inplanemin 0
set inplanemax 0
set betplanemin 0
set betplanemax 0
Ng_MeshQuality inplanemin inplanemax betplanemin betplanemax
puts "Triangle angles : $inplanemin - $inplanemax"
puts "Tet angles : $betplanemin - $betplanemax"
tk_messageBox -message "Triangle angles : $inplanemin - $inplanemax \n Tet angles : $betplanemin - $betplanemax"
}
# .ngmenu.mesh add command -label "Quality Plot" \
# -command { qualityviewdialog 1 }
.ngmenu.mesh add command -label "Check Surface Mesh" \
-command { Ng_CheckSurfaceMesh }
.ngmenu.mesh add command -label "Check Volume Mesh" \
-command { Ng_CheckVolumeMesh }
.ngmenu.mesh add command -label "Edit Boundary Conditions..." \
-command { bcpropdialog }
if { $userlevel == 3 } {
.ngmenu.mesh add command -label "Mesh Doctor..." \
-command { meshdoctordialog }
}
.ngmenu.mesh add command -label "METIS Mesh Partitioning..." \
-command { METISdialog }
.ngmenu.mesh add separator
.ngmenu.mesh add command -label "Analyze Geometry" \
-command { Ng_GenerateMesh ag ag; Ng_ReadStatus; redraw }
.ngmenu.mesh add command -label "Mesh Edges" \
-command { Ng_GenerateMesh me me; Ng_ReadStatus; redraw }
.ngmenu.mesh add command -label "Mesh Surface" \
-command { set selectvisual mesh; Ng_SetVisParameters; \
Ng_GenerateMesh ms ms; Ng_ReadStatus; redraw }
.ngmenu.mesh add command -label "Optimize Surface" \
-command { Ng_GenerateMesh os os cmsmSm; redraw }
.ngmenu.mesh add cascade -label "Surface Optim. Step" -menu .ngmenu.mesh.surfoptstep
menu .ngmenu.mesh.surfoptstep
.ngmenu.mesh.surfoptstep add command -label "Mesh Smoothing" \
-command { Ng_GenerateMesh os os m; redraw}
.ngmenu.mesh.surfoptstep add command -label "Edge swapping (topologic)" \
-command { Ng_GenerateMesh os os s; redraw}
.ngmenu.mesh.surfoptstep add command -label "Edge swapping (metric)" \
-command { Ng_GenerateMesh os os S; redraw}
.ngmenu.mesh.surfoptstep add command -label "Combine points" \
-command { Ng_GenerateMesh os os c; redraw}
.ngmenu.mesh add separator
.ngmenu.mesh add command -label "Mesh Volume" \
-command { Ng_GenerateMesh mv mv; Ng_ReadStatus }
.ngmenu.mesh add command -label "Optimize Volume" \
-command { Ng_GenerateMesh ov ov; Ng_ReadStatus }
.ngmenu.mesh add command -label "Smooth Opt Volume" \
-command { Ng_GenerateMesh ov ov m; Ng_ReadStatus }
.ngmenu.mesh add command -label "Smooth Opt Volume Jacobian" \
-command { Ng_GenerateMesh ov ov j; Ng_ReadStatus }
#####################################################
# #
# Menu Geometry #
# #
#####################################################
menu .ngmenu.geometry
.ngmenu.geometry add command -label "Scan CSG Geometry" -command { Ng_ParseGeometry }
.ngmenu.geometry add command -label "CSG Options..." -command geometryoptionsdialog
# only intern version !
# .ngmenu.geometry add separator
# .ngmenu.geometry add command -label "New Primitive" \
# -command newprimitivedialog -accelerator "<n><p>"
# .ngmenu.geometry add command -label "Edit Primitive" \
# -command editprimitivedialog -accelerator "<e><p>"
# .ngmenu.geometry add command -label "Edit Solid" \
# -command newsoliddialog -accelerator "<e><s>"
# .ngmenu.geometry add command -label "Choose Top Level " \
# -command topleveldialog
# .ngmenu.geometry add command -label "Identify" \
# -command identifydialog
.ngmenu.geometry add command -label "CSG Properties..." \
-command topleveldialog2
.ngmenu.geometry add separator
.ngmenu.geometry add command -label "STL Doctor..." \
-command { stldoctordialog; }
.ngmenu.geometry add command -label "STL Info" \
-command {
set notriangles 0
set minx 0
set maxx 0
set miny 0
set maxy 0
set minz 0
set maxz 0
set trigscons 0
Ng_STLInfo notriangles minx maxx miny maxy minz maxz trigscons
set msgtext "NO STL-Triangles : $notriangles\nGeometry:\nX = $minx - $maxx\nY = $miny - $maxy\nZ = $minz - $maxz\nConsistency Check = $trigscons\n"
set msgtext "$msgtext Status: [Ng_STLInfo status]"
tk_messageBox -title "STL Info" -message $msgtext -type ok
}
.ngmenu.geometry add separator
.ngmenu.geometry add command -label "IGES/STEP Topology Explorer/Doctor..." \
-command { occdialog; }
# Philippose - 30/01/2009
# Add menu item for local face mesh size definition in the
# TCL Gui
.ngmenu.geometry add command -label "Edit Face Mesh Size..." \
-command { surfacemeshsizedialog }
.ngmenu.geometry add command -label "OCC Construction" \
-command { Ng_OCCConstruction; }
if { [Ng_ACISCommand isACISavailable] == "yes" } {
.ngmenu.geometry add command -label "ACIS Topology Explorer..." \
-command { acisdialog; }
.ngmenu.geometry add command -label "ACIS combine all" \
-command { Ng_ACISCommand combineall }
.ngmenu.geometry add command -label "ACIS Create CT" \
-command { Ng_ACISCommand createct }
}
#####################################################
# #
# Menu View #
# #
#####################################################
menu .ngmenu.view
.ngmenu.view add command -label "Zoom all" \
-command { Ng_ZoomAll; redraw }
.ngmenu.view add command -label "Center" \
-command { Ng_Center; redraw }
.ngmenu.view add command -label "x-y plane" \
-command { Ng_StandardRotation xy; redraw }
.ngmenu.view add command -label "y-x plane" \
-command { Ng_StandardRotation yx; redraw }
.ngmenu.view add command -label "x-z plane" \
-command { Ng_StandardRotation xz; redraw }
.ngmenu.view add command -label "z-x plane" \
-command { Ng_StandardRotation zx; redraw }
.ngmenu.view add command -label "y-z plane" \
-command { Ng_StandardRotation yz; redraw }
.ngmenu.view add command -label "z-y plane" \
-command { Ng_StandardRotation zy; redraw }
.ngmenu.view add command -label "Viewing Options..." \
-command { viewingoptionsdialog; redraw }
.ngmenu.view add command -label "Clipping Plane..." \
-command { clippingdialog; redraw }
.ngmenu.view add command -label "Solution Data..." \
-command { visual_dialog; redraw }
.ngmenu.view add checkbutton -variable viewqualityplot \
-label "Quality Plot" \
-command { qualityviewdialog $viewqualityplot }
.ngmenu.view add checkbutton -variable memuseplot \
-label "Memory Usage" \
-command { memusedialog $memuseplot }
#####################################################
# #
# Menu Refinement #
# #
#####################################################
#
# Mesh size menu
#
menu .ngmenu.meshsize
.ngmenu.meshsize add command -label "Refine uniform" \
-command { Ng_Refine; Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }
.ngmenu.meshsize add command -label "Second Order" \
-command { Ng_SecondOrder; Ng_ReadStatus; redraw }
.ngmenu.meshsize add command -label "Validate Second Order" \
-command { Ng_ValidateSecondOrder; Ng_ReadStatus; redraw }
.ngmenu.meshsize add command -label "High Order" \
-command { Ng_HighOrder ${options.elementorder}; Ng_ReadStatus; redraw }
.ngmenu.meshsize add separator
.ngmenu.meshsize add command -label "Refinement Dialog..." \
-command { refinementdialog }
.ngmenu.meshsize add command -label "Load Meshsize..." \
-command {
set types {
{"Meshsize file" {.msz} } }
set file [tk_getOpenFile -filetypes $types]
if {$file != ""} {
Ng_LoadMeshSize $file;
}
}
.ngmenu.meshsize add command -label "MS from Surf Mesh" \
-command { Ng_MeshSizeFromSurfaceMesh }
if { $userlevel == 3 } {
.ngmenu.meshsize add command -label "Singular point ms" \
-command { Ng_SingularPointMS; }
.ngmenu.meshsize add command -label "Singular edge ms" \
-command { Ng_SingularEdgeMS; }
.ngmenu.meshsize add separator
set bisectfilename "";
.ngmenu.meshsize add command -label "Bisection" \
-command { Ng_ReadStatus; set oldnp 0; set newnp $status_np;
# Ng_BisectCopyMesh;
# Ng_Split2Tets;
Ng_ReadStatus;
while { $oldnp < $newnp } {
# if { $level == 0 } {
# Ng_ExportMesh feppmesh.vol fepp;
# } {
# Ng_ExportMesh feppmesh$level feppml
# }
set level [expr $level+1]
if { $bisectfilename == ""} {
Ng_Bisect;
} else {
Ng_Bisect $bisectfilename;
}
# Ng_HighOrder ${options.elementorder} "noparallel"
# Ng_Split2Tets;
Ng_ReadStatus;
redraw;
if { $bisectfilename == ""} {
set oldnp $newnp;
set newnp $status_np;
puts "oldnp $oldnp newnp $newnp";
} else {
set oldnp $newnp;
}
}
}
# -command { Ng_Bisect; Ng_ReadStatus; redraw }
# -command { exec netgen abc >outfile 2>errfile; Ng_ReadStatus; redraw }
}
.ngmenu.meshsize add command -label "Load Refinement Info..." \
-command {
set types {
{"Refinement info" {.refine} }}
set bisectfilename [tk_getOpenFile -filetypes $types]
}
.ngmenu.meshsize add command -label "Z-Refinement" \
-command { Ng_ZRefinement 2; Ng_ReadStatus; redraw }
# .ngmenu.meshsize add command -label "hp-Refinement" \
\# -command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }
.ngmenu.meshsize add cascade -label "hp-Refinement" -menu .ngmenu.meshsize.hpref
menu .ngmenu.meshsize.hpref
.ngmenu.meshsize.hpref add command -label "1 Level" \
-command { Ng_HPRefinement 1; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "2 Levels" \
-command { Ng_HPRefinement 2; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "3 Levels" \
-command { Ng_HPRefinement 3; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "4 Levels" \
-command { Ng_HPRefinement 4; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "5 Levels" \
-command { Ng_HPRefinement 5; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "6 Levels" \
-command { Ng_HPRefinement 6; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "7 Levels" \
-command { Ng_HPRefinement 7; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "8 Levels" \
-command { Ng_HPRefinement 8; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "9 Levels" \
-command { Ng_HPRefinement 9; Ng_ReadStatus; redraw }
.ngmenu.meshsize.hpref add command -label "10 Levels" \
-command { Ng_HPRefinement 10; Ng_ReadStatus; redraw }
.ngmenu.meshsize add command -label "Split to Tets" \
-command { Ng_Split2Tets; Ng_ReadStatus; redraw }
#####################################################
# #
# Menu Special #
# #
#####################################################
menu .ngmenu.special
.ngmenu.special add command -label "Insert virtual boundary layer" \
-command { Ng_InsertVirtualBL; redraw }
.ngmenu.special add command -label "Cut off and combine with other" \
-command {
set types { {"Mesh file" {.vol} } }
set file [tk_getOpenFile -filetypes $types]
if {$file != ""} {
Ng_CutOffAndCombine $file; }
redraw
}
.ngmenu.special add command -label "Helmholtz Mesh grading" \
-command { Ng_HelmholtzMesh; }
.ngmenu.special add command -label "Colour-based boundary conditions" \
-command { Ng_OCCAutoColourBcProps; redraw }
# menu .mbar.stl.menu
# .mbar.stl.menu add command -label "STL options" \
# -command { stloptionsdialog; }
#.mbar.stl.menu add command -label "STL Doctor" \
# -command { stldoctordialog; }
#####################################################
# #
# Menu Help #
# #
#####################################################
menu .ngmenu.help
# .ngmenu.help add command -label "Ng Help..." \
\# -command { help_main }
# .ngmenu.view add checkbutton -variable showsensitivehelp \
# -label "Sensitve Help" \
# -command { sensitivehelpdialog $showsensitivehelp }
.ngmenu.view add checkbutton -label "Help Line" -variable showhelpline \
-command {
if { $showhelpline == 1} {
pack .helpline -before .statbar -side bottom -fill x -padx 3p
} {
pack forget .helpline
}
}
.ngmenu.help add command -label "About..." \
-command {
tk_messageBox -message "This is NETGEN \n mainly written by \n Joachim Sch<EFBFBD>erl \n thanks to \n R. Gaisbauer, J. Gerstmayr"
}
# tk_menuBar .mbar .mbar.file .mbar.mesh .mbar.test .mbar.help
# focus .mbar
#####################################################
# #
# Button bar #
# #
#####################################################
frame .bubar -relief raised -bd 2
pack .bubar -side top -fill x
button .bubar.testb -text "Test" -command { Ng_SaveGeometry }
button .bubar.surfm -text "Generate Mesh" -command \
{ set selectvisual mesh;
Ng_SetVisParameters;
Ng_GenerateMesh ${meshoptions.firststep} ${meshoptions.laststep}
redraw
}
button .bubar.stopm -text "Stop" -command \
{ Ng_StopMeshing; set stopdemo 1 }
button .bubar.exitb -text "Quit" \
-command { .ngmenu.file invoke "Quit" }
pack .bubar.exitb .bubar.surfm .bubar.stopm -side left
#button .bubar.scan -text "Scan" \
# -command { Ng_ParseGeometry; set selectvisual geometry; Ng_SetVisParameters; redraw }
# fuer parallel - buttons :)
Ng_IsParallel;
if { $parallel_netgen } {
# catch{
# source ${ngdir}/ngtcltk/parallel_dialog.tcl
# }
button .bubar.visallb -text "Parallel" -command \
{ paralleldialog; redraw }
pack .bubar.visallb -side left
}
button .bubar.zoomall -text "Zoom All" \
-command { Ng_ZoomAll; redraw }
button .bubar.center -text "Center" \
-command { Ng_Center; redraw }
# tk_optionMenu .bubar.modesel drawmode "rotate" "move " "zoom "
tixOptionMenu .bubar.modesel \
-options {
label.width 0
label.anchor e
menubutton.width 6
} \
-variable drawmode
.bubar.modesel add command rotate -label Rotate
.bubar.modesel add command move -label Move
.bubar.modesel add command zoom -label Zoom
set viewvals { geometry specpoints mesh solution}
if { $userlevel == 3} {
set viewvals { geometry mesh specpoints surfmeshing modelview solution}
}
set viewvallabs(cross) "Cross"
set viewvallabs(geometry) "Geometry"
set viewvallabs(mesh) "Mesh"
set viewvallabs(specpoints) "Edges"
set viewvallabs(surfmeshing) "Mesh Gen"
set viewvallabs(modelview) "Modeller"
set viewvallabs(solution) "Solution"
tixOptionMenu .bubar.selview \
-options {
label.width 0
label.anchor e
menubutton.width 10
} \
foreach viewv $viewvals {
.bubar.selview add command $viewv -label $viewvallabs($viewv)
}
.bubar.selview config -variable selectvisual
.bubar.selview config -command { Ng_SetVisParameters; redraw }
pack .bubar.modesel -side right
pack forget .bubar.modesel
pack .bubar.center .bubar.zoomall .bubar.selview -side right
.ngmenu.view add checkbutton -variable viewrotatebutton \
-label "Enable LeftButton Selection" \
-command {
if { $viewrotatebutton } {
pack .bubar.modesel -side right
} {
pack forget .bubar.modesel
}
}
#####################################################
# #
# Status bar #
# #
#####################################################
label .helpline -text "None"
pack forget .helpline -side bottom -fill x
frame .statbar -relief flat -bd 2
pack .statbar -side bottom -fill x
label .statbar.ptslabel -text "Points: "
label .statbar.ptsval -textvariable status_np
label .statbar.elslabel -text " Elements: "
label .statbar.elsval -textvariable status_ne
label .statbar.selslabel -text " Surf Elements: "
label .statbar.selsval -textvariable status_nse
# label .statbar.memlabel -text " Mem: "
# label .statbar.memval -textvariable mem_moveable
label .statbar.task -textvariable status_task
pack .statbar.ptslabel .statbar.ptsval -side left -ipady 3p
pack .statbar.elslabel .statbar.elsval -side left -ipady 3p
pack .statbar.selslabel .statbar.selsval -side left -ipady 3p
# if { $userlevel == 3 } {
# pack .statbar.memlabel .statbar.memval -side left -ipady 3p
# }
tixMeter .statbar.per -value 0 -text 0%
.statbar.per configure -fillcolor blue
pack .statbar.per -side right
pack .statbar.task -side right -ipady 4
set qualbaraxis(0) 0
set qualbar(0) 0
set qualbarnull(0) 0
proc timer2 { } {
global status_np
global status_ne
global status_nse
global multithread_running
global multithread_redraw
global status_working
global status_task
global status_percent
global status_tetqualclasses
Ng_ReadStatus
if { $multithread_redraw == 1 } {
set multithread_redraw 0;
redraw;
global videoactive
if { $videoactive == 1 } {
puts "addframe"
.ndraw Ng_VideoClip addframe
}
}
global mem_moveable
set mem_moveable [Ng_MemInfo moveable]
.statbar.per config -value [expr $status_percent/100] -text [format %2.1f [expr 0.1*int(10*$status_percent)]]%
if { $multithread_running } {
pack .statbar.per -side right -before .statbar.task -padx 6
} {
pack forget .statbar.per
}
# tet quality
if {[winfo exists .qualityview_dlg] == 1} {
global qualbar
global qualbarnull
global qualbaraxis
set maxval 0
for {set i 0} {$i < 20} {incr i} {
if {[lindex $status_tetqualclasses $i] > $maxval} {
set maxval [lindex $status_tetqualclasses $i]
}
}
set ubound 1
while { $ubound < $maxval } {
set ubound [expr {10 * $ubound}]
}
if { $ubound/5 > $maxval } {
set ubound [expr $ubound/5]
}
if { $ubound/2 > $maxval } {
set ubound [expr $ubound/2]
}
for {set i 1} {$i <= 5} {incr i} {
# global qualbaraxis($i)
set value [expr { $i * $ubound / 5 }]
.qualityview_dlg.c dchars $qualbaraxis($i) 0 end
.qualityview_dlg.c insert $qualbaraxis($i) end $value
}
for {set i 0} {$i < 20} {incr i} {
set x1 [expr {100 + ($i*15) + 2}]
set x2 [expr {$x1+10}]
set nbrs [lindex $status_tetqualclasses $i]
set y [expr (249 - (200 * $nbrs / $ubound ) )]
# global qualbar($i)
.qualityview_dlg.c coords $qualbar($i) $x1 250 $x2 $y
# global qualbarnull($i)
if { $nbrs == 0 } {
.qualityview_dlg.c itemconfigure $qualbarnull($i) -text 0
} {
.qualityview_dlg.c itemconfigure $qualbarnull($i) -text ""
}
}
}
if {[winfo exists .memuse_dlg] == 1} {
global memmark
set usemb [Ng_MemInfo usedmb]
for {set i 0} {$i < [string length $usemb] } {incr i} {
if { [string index $usemb $i] == 0 } {
.memuse_dlg.c coords $memmark($i) [expr 50+$i] 68 [expr 50+$i] 70
} {
.memuse_dlg.c coords $memmark($i) [expr 50+$i] 50 [expr 50+$i] 70
}
}
}
after 200 { timer2 }
}
# after 1000 { timer2 }
timer2
proc bgerror { error } {
global errorInfo userlevel
if { $userlevel == 3} {
puts "ERROR: $error"
puts "errinfo: $errorInfo"
}
tk_messageBox -title "Error Message" -message $error -type ok
}
proc smh2 { menuitem } {
if {[catch {$menuitem entrycget active -label} name]} {
set name " "
}
show_menu_help $name
update idletasks
}
bind .ngmenu <<MenuSelect>> { smh2 %W }
bind .ngmenu.file <<MenuSelect>> { smh2 %W }
bind .ngmenu.geometry <<MenuSelect>> { smh2 %W }
bind .ngmenu.mesh <<MenuSelect>> { smh2 %W }
bind .ngmenu.view <<MenuSelect>> { smh2 %W }
bind .ngmenu.meshsize <<MenuSelect>> { smh2 %W }
bind .ngmenu.special <<MenuSelect>> { smh2 %W }
bind .ngmenu.help <<MenuSelect>> { smh2 %W }
# command bindings
bind . <q> { .ngmenu.file invoke "Quit" }
bind . <l><g> { .ngmenu.file invoke "Load Geometry..." } ;
bind . <l><m> { .ngmenu.file invoke "Load Mesh..." } ;
bind . <s><m> { .ngmenu.file invoke "Save Mesh..." } ;
bind . <r><f> { .ngmenu.file activate "Recent Files" } ;
bind . <n><p> { newprimitivedialog } ; #
bind . <e><p> { editprimitivedialog }
bind . <e><s> { newsoliddialog }
bind . <g><m> { .ngmenu.mesh invoke "Generate Mesh" } ;
# bind . <v><m> { .bubar.selview configure activate mesh } ;
Reference in New Issue View Git Blame Copy Permalink