smesh/src/SMESH_SWIG/SMESH_controls.py

#  -*- coding: iso-8859-1 -*-
# Copyright (C) 2007-2019  CEA/DEN, EDF R&D, OPEN CASCADE
#
# Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#

#  File   : SMESH_control.py
#  Author : Sergey LITONIN
#  Module : SMESH
#
import salome
import SMESH_mechanic

import SMESH, SALOMEDS
from salome.smesh import smeshBuilder
smesh =  smeshBuilder.New()
mesh = SMESH_mechanic.mesh

# ---- Criterion : AREA > 100

# create group
aGroup = mesh.MakeGroup("Area > 100", SMESH.FACE, SMESH.FT_Area, SMESH.FT_MoreThan, 100)

# print result
anIds = aGroup.GetIDs()
print("Criterion: Area > 100 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# ----  Criterion : Taper > 3e-15

# create group
aGroup = mesh.MakeGroup("Taper > 3e-15", SMESH.FACE, SMESH.FT_Taper, SMESH.FT_MoreThan, 3e-15)

# print result
anIds = aGroup.GetIDs()
print("Criterion: Taper > 3e-15 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# ----  Criterion : ASPECT RATIO > 1.3

# create group
aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", SMESH.FACE, SMESH.FT_AspectRatio, SMESH.FT_MoreThan, 1.3)

# print result
anIds = aGroup.GetIDs()
print("Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# ----  Criterion : MINIMUM ANGLE < 30

# create group
aGroup = mesh.MakeGroup("Minimum Angle < 30", SMESH.FACE, SMESH.FT_MinimumAngle, SMESH.FT_LessThan, 30)

# print result
anIds = aGroup.GetIDs()
print("Criterion: Minimum Angle < 30 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# ---- Criterion : Warp > 2e-13

# create group
aGroup = mesh.MakeGroup("Warp > 2e-13", SMESH.FACE, SMESH.FT_Warping, SMESH.FT_MoreThan, 2e-13 )

# print result
anIds = aGroup.GetIDs()
print("Criterion: Warp > 2e-13 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# ---- Criterion : Skew > 18

# create group
aGroup = mesh.MakeGroup("Skew > 18", SMESH.FACE, SMESH.FT_Skew, SMESH.FT_MoreThan, 18 )

# print result
anIds = aGroup.GetIDs()
print("Criterion: Skew > 18 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# Criterion : Length > 10

# create group
aGroup = mesh.MakeGroup("Length > 10", SMESH.FACE, SMESH.FT_Length, SMESH.FT_MoreThan, 10 )

# print result
anIds = aGroup.GetIDs()
print("Criterion: Length > 10 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# Criterion : Borders at multi-connections = 2

# create group
aGroup = mesh.MakeGroup("Borders at multi-connections = 2", SMESH.EDGE, SMESH.FT_MultiConnection, SMESH.FT_EqualTo, 2)

# print result
anIds = aGroup.GetIDs()
print("Criterion: Borders at multi-connections = 2 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


# Criterion : Element Diameter 2D > 10

# create group
aGroup = mesh.MakeGroup("Element Diameter 2D > 10", SMESH.FACE, SMESH.FT_MaxElementLength2D, SMESH.FT_MoreThan, 10 )

# print result
anIds = aGroup.GetIDs()
print("Criterion: Element Diameter 2D > 10 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
  #print anIds[ i ]


salome.sg.updateObjBrowser()