diff --git a/src/OBJECT/SMESH_DeviceActor.cxx b/src/OBJECT/SMESH_DeviceActor.cxx index dd7c3480b..b3046dd88 100644 --- a/src/OBJECT/SMESH_DeviceActor.cxx +++ b/src/OBJECT/SMESH_DeviceActor.cxx @@ -393,12 +393,13 @@ SMESH_DeviceActor vtkUnsignedCharArray* aCellTypesArray = vtkUnsignedCharArray::New(); aCellTypesArray->SetNumberOfComponents( 1 ); aCellTypesArray->Allocate( aNbCells * aCellTypesArray->GetNumberOfComponents() ); - + vtkIdList *anIdList = vtkIdList::New(); anIdList->SetNumberOfIds(2); - + Length2D::TValues::const_iterator anIter = aValues.begin(); - for(vtkIdType aVtkId = 0; anIter != aValues.end(); anIter++,aVtkId++){ + aNbCells = 0; + for(; anIter != aValues.end(); anIter++){ const Length2D::Value& aValue = *anIter; int aNode[2] = { myVisualObj->GetNodeVTKId(aValue.myPntId[0]), @@ -409,27 +410,30 @@ SMESH_DeviceActor anIdList->SetId( 1, aNode[1] ); aConnectivity->InsertNextCell( anIdList ); aCellTypesArray->InsertNextValue( VTK_LINE ); - aScalars->SetValue(aVtkId,aValue.myLength); + aScalars->SetValue(aNbCells,aValue.myLength); + aNbCells++; } } - + aCellTypesArray->SetNumberOfTuples( aNbCells ); + aScalars->SetNumberOfTuples( aNbCells ); + VTKViewer_CellLocationsArray* aCellLocationsArray = VTKViewer_CellLocationsArray::New(); aCellLocationsArray->SetNumberOfComponents( 1 ); aCellLocationsArray->SetNumberOfTuples( aNbCells ); - + aConnectivity->InitTraversal(); for( vtkIdType idType = 0, *pts, npts; aConnectivity->GetNextCell( npts, pts ); idType++ ) aCellLocationsArray->SetValue( idType, aConnectivity->GetTraversalLocation( npts ) ); - - aDataSet->SetCells( aCellTypesArray, aCellLocationsArray,aConnectivity ); + + aDataSet->SetCells( aCellTypesArray, aCellLocationsArray, aConnectivity ); SetUnstructuredGrid(aDataSet); aDataSet->GetCellData()->SetScalars(aScalars); aScalars->Delete(); - + theLookupTable->SetRange(aScalars->GetRange()); theLookupTable->Build(); - + myMergeFilter->SetScalarsData(aDataSet); aDataSet->Delete(); } @@ -449,16 +453,17 @@ SMESH_DeviceActor vtkIdType aCellsSize = 3*aNbCells; vtkCellArray* aConnectivity = vtkCellArray::New(); aConnectivity->Allocate( aCellsSize, 0 ); - + vtkUnsignedCharArray* aCellTypesArray = vtkUnsignedCharArray::New(); aCellTypesArray->SetNumberOfComponents( 1 ); aCellTypesArray->Allocate( aNbCells * aCellTypesArray->GetNumberOfComponents() ); - + vtkIdList *anIdList = vtkIdList::New(); anIdList->SetNumberOfIds(2); - + MultiConnection2D::MValues::const_iterator anIter = aValues.begin(); - for(vtkIdType aVtkId = 0; anIter != aValues.end(); anIter++,aVtkId++){ + aNbCells = 0; + for(; anIter != aValues.end(); anIter++){ const MultiConnection2D::Value& aValue = (*anIter).first; int aNode[2] = { myVisualObj->GetNodeVTKId(aValue.myPntId[0]), @@ -469,27 +474,30 @@ SMESH_DeviceActor anIdList->SetId( 1, aNode[1] ); aConnectivity->InsertNextCell( anIdList ); aCellTypesArray->InsertNextValue( VTK_LINE ); - aScalars->SetValue(aVtkId,(*anIter).second); + aScalars->SetValue( aNbCells,(*anIter).second); + aNbCells++; } } - + aCellTypesArray->SetNumberOfTuples( aNbCells ); + aScalars->SetNumberOfTuples( aNbCells ); + VTKViewer_CellLocationsArray* aCellLocationsArray = VTKViewer_CellLocationsArray::New(); aCellLocationsArray->SetNumberOfComponents( 1 ); aCellLocationsArray->SetNumberOfTuples( aNbCells ); - + aConnectivity->InitTraversal(); for( vtkIdType idType = 0, *pts, npts; aConnectivity->GetNextCell( npts, pts ); idType++ ) aCellLocationsArray->SetValue( idType, aConnectivity->GetTraversalLocation( npts ) ); - + aDataSet->SetCells( aCellTypesArray, aCellLocationsArray,aConnectivity ); SetUnstructuredGrid(aDataSet); aDataSet->GetCellData()->SetScalars(aScalars); aScalars->Delete(); - + theLookupTable->SetRange(aScalars->GetRange()); theLookupTable->Build(); - + myMergeFilter->SetScalarsData(aDataSet); aDataSet->Delete(); } diff --git a/src/SMESH/SMESH_MeshEditor.cxx b/src/SMESH/SMESH_MeshEditor.cxx index 75a8f216e..d334c7d5c 100644 --- a/src/SMESH/SMESH_MeshEditor.cxx +++ b/src/SMESH/SMESH_MeshEditor.cxx @@ -10228,6 +10228,7 @@ bool SMESH_MeshEditor::doubleNodes( SMESHDS_Mesh* theMeshDS, { // duplicate node aNewNode = theMeshDS->AddNode( aCurrNode->X(), aCurrNode->Y(), aCurrNode->Z() ); + copyPosition( aCurrNode, aNewNode ); theNodeNodeMap[ aCurrNode ] = aNewNode; myLastCreatedNodes.Append( aNewNode ); } @@ -10240,10 +10241,8 @@ bool SMESH_MeshEditor::doubleNodes( SMESHDS_Mesh* theMeshDS, if ( theIsDoubleElem ) AddElement(newNodes, anElem->GetType(), anElem->IsPoly()); else - { - MESSAGE("ChangeElementNodes"); theMeshDS->ChangeElementNodes( anElem, &newNodes[ 0 ], anElem->NbNodes() ); - } + res = true; } return res; @@ -10254,8 +10253,8 @@ bool SMESH_MeshEditor::doubleNodes( SMESHDS_Mesh* theMeshDS, \brief Creates a hole in a mesh by doubling the nodes of some particular elements \param theNodes - identifiers of nodes to be doubled \param theModifiedElems - identifiers of elements to be updated by the new (doubled) - nodes. If list of element identifiers is empty then nodes are doubled but - they not assigned to elements + nodes. If list of element identifiers is empty then nodes are doubled but + they not assigned to elements \return TRUE if operation has been completed successfully, FALSE otherwise */ //================================================================================ @@ -10291,6 +10290,7 @@ bool SMESH_MeshEditor::DoubleNodes( const std::list< int >& theListOfNodes, const SMDS_MeshNode* aNewNode = aMeshDS->AddNode( aNode->X(), aNode->Y(), aNode->Z() ); if ( aNewNode ) { + copyPosition( aNode, aNewNode ); anOldNodeToNewNode[ aNode ] = aNewNode; myLastCreatedNodes.Append( aNewNode ); } @@ -10909,6 +10909,7 @@ bool SMESH_MeshEditor::DoubleNodesOnGroupBoundaries( const std::vectorGetPoint(oldId); SMDS_MeshNode *newNode = meshDS->AddNode(coords[0], coords[1], coords[2]); + copyPosition( meshDS->FindNodeVtk( oldId ), newNode ); int newId = newNode->getVtkId(); nodeDomains[oldId][idom] = newId; // cloned node for other domains //MESSAGE("-+-+-c oldNode " << oldId << " domain " << idomain << " newNode " << newId << " domain " << idom << " size=" <AddNode(node->X(), node->Y(), node->Z()); + copyPosition( node, clone ); clonedNodes[node] = clone; } else @@ -11338,6 +11340,7 @@ bool SMESH_MeshEditor::CreateFlatElementsOnFacesGroups(const std::vectorAddNode(node->X(), node->Y(), node->Z()); + copyPosition( node, inter ); intermediateNodes[node] = inter; } else @@ -12282,3 +12285,45 @@ int SMESH_MeshEditor::MakeBoundaryMesh(const TIDSortedElemSet& elements, } return nbAddedBnd; } + +//================================================================================ +/*! + * \brief Copy node position and set \a to node on the same geometry + */ +//================================================================================ + +void SMESH_MeshEditor::copyPosition( const SMDS_MeshNode* from, + const SMDS_MeshNode* to ) +{ + if ( !from || !to ) return; + + SMDS_PositionPtr pos = from->GetPosition(); + if ( !pos || from->getshapeId() < 1 ) return; + + switch ( pos->GetTypeOfPosition() ) + { + case SMDS_TOP_3DSPACE: break; + + case SMDS_TOP_FACE: + { + const SMDS_FacePosition* fPos = static_cast< const SMDS_FacePosition* >( pos ); + GetMeshDS()->SetNodeOnFace( to, from->getshapeId(), + fPos->GetUParameter(), fPos->GetVParameter() ); + break; + } + case SMDS_TOP_EDGE: + { + // WARNING: it is dangerous to set equal nodes on one EDGE!!!!!!!! + const SMDS_EdgePosition* ePos = static_cast< const SMDS_EdgePosition* >( pos ); + GetMeshDS()->SetNodeOnEdge( to, from->getshapeId(), ePos->GetUParameter() ); + break; + } + case SMDS_TOP_VERTEX: + { + GetMeshDS()->SetNodeOnVertex( to, from->getshapeId() ); + break; + } + case SMDS_TOP_UNSPEC: + default:; + } +} diff --git a/src/SMESH/SMESH_MeshEditor.hxx b/src/SMESH/SMESH_MeshEditor.hxx index 5adb43a41..014437c6d 100644 --- a/src/SMESH/SMESH_MeshEditor.hxx +++ b/src/SMESH/SMESH_MeshEditor.hxx @@ -686,6 +686,9 @@ public: std::map< const SMDS_MeshNode*, const SMDS_MeshNode* >& theNodeNodeMap, const bool theIsDoubleElem ); + void copyPosition( const SMDS_MeshNode* from, + const SMDS_MeshNode* to ); + private: SMESH_Mesh * myMesh; diff --git a/src/SMESH/SMESH_MesherHelper.cxx b/src/SMESH/SMESH_MesherHelper.cxx index c6c51ab37..48244b055 100644 --- a/src/SMESH/SMESH_MesherHelper.cxx +++ b/src/SMESH/SMESH_MesherHelper.cxx @@ -259,6 +259,7 @@ void SMESH_MesherHelper::SetSubShape(const TopoDS_Shape& aSh) { // look for a "seam" edge, a real seam or an edge on period boundary TopoDS_Edge edge = TopoDS::Edge( exp.Current() ); + const int edgeID = meshDS->ShapeToIndex( edge ); if ( myParIndex ) { BRep_Tool::UVPoints( edge, face, uv1, uv2 ); @@ -305,7 +306,6 @@ void SMESH_MesherHelper::SetSubShape(const TopoDS_Shape& aSh) if ( isSeam ) { // store seam shape indices, negative if shape encounters twice - int edgeID = meshDS->ShapeToIndex( edge ); mySeamShapeIds.insert( IsSeamShape( edgeID ) ? -edgeID : edgeID ); for ( TopExp_Explorer v( edge, TopAbs_VERTEX ); v.More(); v.Next() ) { int vertexID = meshDS->ShapeToIndex( v.Current() ); @@ -315,10 +315,15 @@ void SMESH_MesherHelper::SetSubShape(const TopoDS_Shape& aSh) } // look for a degenerated edge if ( SMESH_Algo::isDegenerated( edge )) { - myDegenShapeIds.insert( meshDS->ShapeToIndex( edge )); + myDegenShapeIds.insert( edgeID ); for ( TopExp_Explorer v( edge, TopAbs_VERTEX ); v.More(); v.Next() ) myDegenShapeIds.insert( meshDS->ShapeToIndex( v.Current() )); } + if ( !BRep_Tool::SameParameter( edge ) || + !BRep_Tool::SameRange( edge )) + { + setPosOnShapeValidity( edgeID, false ); + } } } } @@ -527,11 +532,11 @@ void SMESH_MesherHelper::ToFixNodeParameters(bool toFix) //======================================================================= -//function : GetUVOnSeam +//function : getUVOnSeam //purpose : Select UV on either of 2 pcurves of a seam edge, closest to the given UV //======================================================================= -gp_Pnt2d SMESH_MesherHelper::GetUVOnSeam( const gp_Pnt2d& uv1, const gp_Pnt2d& uv2 ) const +gp_Pnt2d SMESH_MesherHelper::getUVOnSeam( const gp_Pnt2d& uv1, const gp_Pnt2d& uv2 ) const { gp_Pnt2d result = uv1; for ( int i = U_periodic; i <= V_periodic ; ++i ) @@ -568,38 +573,34 @@ gp_XY SMESH_MesherHelper::GetNodeUV(const TopoDS_Face& F, const SMDS_PositionPtr Pos = n->GetPosition(); bool uvOK = false; - if(Pos->GetTypeOfPosition()==SMDS_TOP_FACE) + if ( Pos->GetTypeOfPosition() == SMDS_TOP_FACE ) { // node has position on face - const SMDS_FacePosition* fpos = - static_cast( Pos ); - uv.SetCoord(fpos->GetUParameter(),fpos->GetVParameter()); + const SMDS_FacePosition* fpos = static_cast( Pos ); + uv.SetCoord( fpos->GetUParameter(), fpos->GetVParameter() ); if ( check ) - uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*MaxTolerance( F )); + uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*getFaceMaxTol( F )); } - else if(Pos->GetTypeOfPosition()==SMDS_TOP_EDGE) + else if ( Pos->GetTypeOfPosition() == SMDS_TOP_EDGE ) { - // node has position on edge => it is needed to find - // corresponding edge from face, get pcurve for this - // edge and retrieve value from this pcurve - const SMDS_EdgePosition* epos = - static_cast( Pos ); - int edgeID = n->getshapeId(); - TopoDS_Edge E = TopoDS::Edge(GetMeshDS()->IndexToShape(edgeID)); + // node has position on EDGE => it is needed to find + // corresponding EDGE from FACE, get pcurve for this + // EDGE and retrieve value from this pcurve + const SMDS_EdgePosition* epos = static_cast( Pos ); + const int edgeID = n->getshapeId(); + const TopoDS_Edge& E = TopoDS::Edge( GetMeshDS()->IndexToShape( edgeID )); double f, l, u = epos->GetUParameter(); - Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface(E, F, f, l); - bool validU = ( f < u && u < l ); - if ( validU ) - uv = C2d->Value( u ); - else - uv.SetCoord( Precision::Infinite(),0.); + Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( E, F, f, l ); + bool validU = ( !C2d.IsNull() && ( f < u ) && ( u < l )); + if ( validU ) uv = C2d->Value( u ); + else uv.SetCoord( Precision::Infinite(),0.); if ( check || !validU ) - uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*MaxTolerance( F ),/*force=*/ !validU ); + uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*getFaceMaxTol( F ),/*force=*/ !validU ); - // for a node on a seam edge select one of UVs on 2 pcurves - if ( n2 && IsSeamShape( edgeID ) ) + // for a node on a seam EDGE select one of UVs on 2 pcurves + if ( n2 && IsSeamShape( edgeID )) { - uv = GetUVOnSeam( uv, GetNodeUV( F, n2, 0, check )); + uv = getUVOnSeam( uv, GetNodeUV( F, n2, 0, check )); } else { // adjust uv to period @@ -611,23 +612,22 @@ gp_XY SMESH_MesherHelper::GetNodeUV(const TopoDS_Face& F, if ( isUPeriodic || isVPeriodic ) { Standard_Real UF,UL,VF,VL; S->Bounds(UF,UL,VF,VL); - if ( isUPeriodic ) - newUV.SetX( uv.X() + ShapeAnalysis::AdjustToPeriod(uv.X(),UF,UL)); - if ( isVPeriodic ) - newUV.SetY( uv.Y() + ShapeAnalysis::AdjustToPeriod(uv.Y(),VF,VL)); - } - if ( n2 ) - { - gp_Pnt2d uv2 = GetNodeUV( F, n2, 0, check ); - if ( isUPeriodic && Abs( uv.X()-uv2.X() ) < Abs( newUV.X()-uv2.X() )) - newUV.SetX( uv.X() ); - if ( isVPeriodic && Abs( uv.Y()-uv2.Y() ) < Abs( newUV.Y()-uv2.Y() )) - newUV.SetY( uv.Y() ); + if ( isUPeriodic ) newUV.SetX( uv.X() + ShapeAnalysis::AdjustToPeriod(uv.X(),UF,UL)); + if ( isVPeriodic ) newUV.SetY( uv.Y() + ShapeAnalysis::AdjustToPeriod(uv.Y(),VF,VL)); + + if ( n2 ) + { + gp_Pnt2d uv2 = GetNodeUV( F, n2, 0, check ); + if ( isUPeriodic && Abs( uv.X()-uv2.X() ) < Abs( newUV.X()-uv2.X() )) + newUV.SetX( uv.X() ); + if ( isVPeriodic && Abs( uv.Y()-uv2.Y() ) < Abs( newUV.Y()-uv2.Y() )) + newUV.SetY( uv.Y() ); + } } uv = newUV; } } - else if(Pos->GetTypeOfPosition()==SMDS_TOP_VERTEX) + else if ( Pos->GetTypeOfPosition() == SMDS_TOP_VERTEX ) { if ( int vertexID = n->getshapeId() ) { const TopoDS_Vertex& V = TopoDS::Vertex(GetMeshDS()->IndexToShape(vertexID)); @@ -646,7 +646,7 @@ gp_XY SMESH_MesherHelper::GetNodeUV(const TopoDS_Face& F, // get UV of a vertex closest to the node double dist = 1e100; gp_Pnt pn = XYZ( n ); - for ( TopExp_Explorer vert(F,TopAbs_VERTEX); !uvOK && vert.More(); vert.Next() ) { + for ( TopExp_Explorer vert( F,TopAbs_VERTEX ); !uvOK && vert.More(); vert.Next() ) { TopoDS_Vertex curV = TopoDS::Vertex( vert.Current() ); gp_Pnt p = BRep_Tool::Pnt( curV ); double curDist = p.SquareDistance( pn ); @@ -675,13 +675,23 @@ gp_XY SMESH_MesherHelper::GetNodeUV(const TopoDS_Face& F, } } } - if ( n2 && IsSeamShape( vertexID ) ) - uv = GetUVOnSeam( uv, GetNodeUV( F, n2, 0 )); + if ( n2 && IsSeamShape( vertexID )) + { + bool isSeam = ( myShape.IsSame( F )); + if ( !isSeam ) { + SMESH_MesherHelper h( *myMesh ); + h.SetSubShape( F ); + isSeam = IsSeamShape( vertexID ); + } + + if ( isSeam ) + uv = getUVOnSeam( uv, GetNodeUV( F, n2, 0 )); + } } } else { - uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*MaxTolerance( F )); + uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*getFaceMaxTol( F )); } if ( check ) @@ -750,7 +760,7 @@ bool SMESH_MesherHelper::CheckNodeUV(const TopoDS_Face& F, const_cast(n)->SetPosition ( SMDS_PositionPtr( new SMDS_FacePosition( U, V ))); } - else if ( uv.Modulus() > numeric_limits::min() ) + else if ( myShape.IsSame(F) && uv.Modulus() > numeric_limits::min() ) { setPosOnShapeValidity( shapeID, true ); } @@ -1037,9 +1047,12 @@ bool SMESH_MesherHelper::CheckNodeU(const TopoDS_Edge& E, //======================================================================= //function : GetMediumPos //purpose : Return index and type of the shape (EDGE or FACE only) to -// set a medium node on +// set a medium node on //param : useCurSubShape - if true, returns the shape set via SetSubShape() // if any +// calling GetMediumPos() with useCurSubShape=true is OK only for the +// case where the lower dim mesh is already constructed and converted to quadratic, +// else, nodes on EDGEs are assigned to FACE, for example. //======================================================================= std::pair @@ -1442,11 +1455,9 @@ const SMDS_MeshNode* SMESH_MesherHelper::GetMediumNode(const SMDS_MeshNode* n1, TopoDS_Edge E; double u [2]; TopoDS_Face F; gp_XY uv[2]; bool uvOK[2] = { false, false }; + const bool useCurSubShape = ( !myShape.IsNull() && myShape.ShapeType() == TopAbs_EDGE ); - pair pos = GetMediumPos( n1, n2, mySetElemOnShape ); - // calling GetMediumPos() with useCurSubShape=mySetElemOnShape is OK only for the - // case where the lower dim mesh is already constructed, else, nodes on EDGEs are - // assigned to FACE, for example. + pair pos = GetMediumPos( n1, n2, useCurSubShape ); // get positions of the given nodes on shapes if ( pos.second == TopAbs_FACE ) @@ -2848,6 +2859,24 @@ double SMESH_MesherHelper::MaxTolerance( const TopoDS_Shape& shape ) return tol; } +//================================================================================ +/*! + * \brief Return MaxTolerance( face ), probably cached + */ +//================================================================================ + +double SMESH_MesherHelper::getFaceMaxTol( const TopoDS_Shape& face ) const +{ + int faceID = GetMeshDS()->ShapeToIndex( face ); + + SMESH_MesherHelper* me = const_cast< SMESH_MesherHelper* >( this ); + double & tol = me->myFaceMaxTol.insert( make_pair( faceID, -1. )).first->second; + if ( tol < 0 ) + tol = MaxTolerance( face ); + + return tol; +} + //================================================================================ /*! * \brief Return an angle between two EDGEs sharing a common VERTEX with reference @@ -4606,6 +4635,8 @@ void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError, // 3. Compute displacement of medium nodes // --------------------------------------- + SMESH_MesherHelper faceHlp(*myMesh); + // two loops on QFaces: the first is to treat boundary links, the second is for internal ones. TopLoc_Location loc; bool checkUV; @@ -4689,22 +4720,23 @@ void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError, TopoDS_Face face; if ( !isInside ) { - // compute node displacement of end links of chain in parametric space of face + // compute node displacement of end links of chain in parametric space of FACE TChainLink& linkOnFace = *(++chain.begin()); const SMDS_MeshNode* nodeOnFace = linkOnFace->_mediumNode; TopoDS_Shape f = GetSubShapeByNode( nodeOnFace, GetMeshDS() ); if ( !f.IsNull() && f.ShapeType() == TopAbs_FACE ) { face = TopoDS::Face( f ); + faceHlp.SetSubShape( face ); Handle(Geom_Surface) surf = BRep_Tool::Surface(face,loc); bool isStraight[2]; for ( int is1 = 0; is1 < 2; ++is1 ) // move0 or move1 { TChainLink& link = is1 ? chain.back() : chain.front(); - gp_XY uvm = GetNodeUV( face, link->_mediumNode, nodeOnFace, &checkUV); - gp_XY uv1 = GetNodeUV( face, link->node1(), nodeOnFace, &checkUV); - gp_XY uv2 = GetNodeUV( face, link->node2(), nodeOnFace, &checkUV); - gp_XY uv12 = GetMiddleUV( surf, uv1, uv2); + gp_XY uvm = faceHlp.GetNodeUV( face, link->_mediumNode, nodeOnFace, &checkUV ); + gp_XY uv1 = faceHlp.GetNodeUV( face, link->node1(), nodeOnFace, &checkUV ); + gp_XY uv2 = faceHlp.GetNodeUV( face, link->node2(), nodeOnFace, &checkUV ); + gp_XY uv12 = faceHlp.GetMiddleUV( surf, uv1, uv2 ); // uvMove = uvm - uv12 gp_XY uvMove = applyIn2D(surf, uvm, uv12, gp_XY_Subtracted, /*inPeriod=*/false); ( is1 ? move1 : move0 ).SetCoord( uvMove.X(), uvMove.Y(), 0 ); @@ -4719,10 +4751,10 @@ void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError, } // check if a chain is already fixed - gp_XY uvm = GetNodeUV( face, linkOnFace->_mediumNode, 0, &checkUV); - gp_XY uv1 = GetNodeUV( face, linkOnFace->node1(), nodeOnFace, &checkUV); - gp_XY uv2 = GetNodeUV( face, linkOnFace->node2(), nodeOnFace, &checkUV); - gp_XY uv12 = GetMiddleUV( surf, uv1, uv2); + gp_XY uvm = faceHlp.GetNodeUV( face, linkOnFace->_mediumNode, 0, &checkUV ); + gp_XY uv1 = faceHlp.GetNodeUV( face, linkOnFace->node1(), nodeOnFace, &checkUV ); + gp_XY uv2 = faceHlp.GetNodeUV( face, linkOnFace->node2(), nodeOnFace, &checkUV ); + gp_XY uv12 = faceHlp.GetMiddleUV( surf, uv1, uv2 ); if (( uvm - uv12 ).SquareModulus() > 1e-10 ) { MSG("Already fixed - ignore"); @@ -4767,8 +4799,8 @@ void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError, else { // compute 3D displacement by 2D one Handle(Geom_Surface) s = BRep_Tool::Surface(face,loc); - gp_XY oldUV = GetNodeUV( face, (*link1)->_mediumNode, 0, &checkUV); - gp_XY newUV = applyIn2D( s, oldUV, gp_XY( move.X(),move.Y()), gp_XY_Added); + gp_XY oldUV = faceHlp.GetNodeUV( face, (*link1)->_mediumNode, 0, &checkUV ); + gp_XY newUV = applyIn2D( s, oldUV, gp_XY( move.X(),move.Y()), gp_XY_Added ); gp_Pnt newPnt = s->Value( newUV.X(), newUV.Y()); move = gp_Vec( XYZ((*link1)->_mediumNode), newPnt.Transformed(loc) ); if ( SMDS_FacePosition* nPos = @@ -4778,8 +4810,8 @@ void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError, if ( (XYZ((*link1)->node1()) - XYZ((*link1)->node2())).SquareModulus() < move.SquareMagnitude()) { - gp_XY uv0 = GetNodeUV( face, (*link0)->_mediumNode, 0, &checkUV); - gp_XY uv2 = GetNodeUV( face, (*link2)->_mediumNode, 0, &checkUV); + gp_XY uv0 = faceHlp.GetNodeUV( face, (*link0)->_mediumNode, 0, &checkUV ); + gp_XY uv2 = faceHlp.GetNodeUV( face, (*link2)->_mediumNode, 0, &checkUV ); MSG( "TOO LONG MOVE \t" << "uv0: "< TID2ProjectorOnSurf; - TID2ProjectorOnSurf myFace2Projector; + std::map< int, double > myFaceMaxTol; + + typedef std::map< int, GeomAPI_ProjectPointOnSurf* > TID2ProjectorOnSurf; typedef std::map< int, GeomAPI_ProjectPointOnCurve* > TID2ProjectorOnCurve; + TID2ProjectorOnSurf myFace2Projector; TID2ProjectorOnCurve myEdge2Projector; TopoDS_Shape myShape; diff --git a/src/StdMeshers/StdMeshers_Import_1D2D.cxx b/src/StdMeshers/StdMeshers_Import_1D2D.cxx index 636cd73ec..c8b1a70c5 100644 --- a/src/StdMeshers/StdMeshers_Import_1D2D.cxx +++ b/src/StdMeshers/StdMeshers_Import_1D2D.cxx @@ -213,7 +213,7 @@ bool StdMeshers_Import_1D2D::Compute(SMESH_Mesh & theMesh, const TopoDS_Shape & existingNodes.insert( n ); } - // get EDGESs and their ids and get existing nodes on EDGEs + // get EDGEs and their ids and get existing nodes on EDGEs vector< TopoDS_Edge > edges; for ( exp.Init( theShape, TopAbs_EDGE ); exp.More(); exp.Next() ) {