diff --git a/Makefile.am b/Makefile.am index b37435467..aaf432892 100644 --- a/Makefile.am +++ b/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # -* Makefile *- diff --git a/SMESH_version.h.in b/SMESH_version.h.in index 64d31df91..c6d7391e9 100644 --- a/SMESH_version.h.in +++ b/SMESH_version.h.in @@ -1,23 +1,23 @@ -// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +// Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE // -// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS // -// This library is free software; you can redistribute it and/or -// modify it under the terms of the GNU Lesser General Public -// License as published by the Free Software Foundation; either -// version 2.1 of the License. +// This library is free software; you can redistribute it and/or +// modify it under the terms of the GNU Lesser General Public +// License as published by the Free Software Foundation; either +// version 2.1 of the License. // -// This library is distributed in the hope that it will be useful, -// but WITHOUT ANY WARRANTY; without even the implied warranty of -// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -// Lesser General Public License for more details. +// This library is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +// Lesser General Public License for more details. // -// You should have received a copy of the GNU Lesser General Public -// License along with this library; if not, write to the Free Software -// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +// You should have received a copy of the GNU Lesser General Public +// License along with this library; if not, write to the Free Software +// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // -// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // // File : SMESH_version.h diff --git a/adm_local/Makefile.am b/adm_local/Makefile.am index 8c38d3d27..2bc4a55b3 100644 --- a/adm_local/Makefile.am +++ b/adm_local/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # include $(top_srcdir)/adm_local/unix/make_common_starter.am diff --git a/adm_local/cmake_files/FindSMESH.cmake b/adm_local/cmake_files/FindSMESH.cmake index cd7b4c55a..1ca3150cf 100644 --- a/adm_local/cmake_files/FindSMESH.cmake +++ b/adm_local/cmake_files/FindSMESH.cmake @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # SET(SMESH_CXXFLAGS -I${SMESH_ROOT_DIR}/include/salome) diff --git a/adm_local/cmake_files/Makefile.am b/adm_local/cmake_files/Makefile.am index 8d4db5e06..d28abfef9 100644 --- a/adm_local/cmake_files/Makefile.am +++ b/adm_local/cmake_files/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # include $(top_srcdir)/adm_local/unix/make_common_starter.am diff --git a/adm_local/unix/Makefile.am b/adm_local/unix/Makefile.am index 190640454..8451478b1 100644 --- a/adm_local/unix/Makefile.am +++ b/adm_local/unix/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # include $(top_srcdir)/adm_local/unix/make_common_starter.am diff --git a/adm_local/unix/config_files/Makefile.am b/adm_local/unix/config_files/Makefile.am index ef0b61dd0..1391d786d 100644 --- a/adm_local/unix/config_files/Makefile.am +++ b/adm_local/unix/config_files/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # include $(top_srcdir)/adm_local/unix/make_common_starter.am diff --git a/adm_local/unix/config_files/check_Platform.m4 b/adm_local/unix/config_files/check_Platform.m4 index 6262fbfaf..d1dac076a 100755 --- a/adm_local/unix/config_files/check_Platform.m4 +++ b/adm_local/unix/config_files/check_Platform.m4 @@ -1,23 +1,23 @@ -dnl Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +dnl Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE dnl -dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS dnl -dnl This library is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Lesser General Public -dnl License as published by the Free Software Foundation; either -dnl version 2.1 of the License. +dnl This library is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Lesser General Public +dnl License as published by the Free Software Foundation; either +dnl version 2.1 of the License. dnl -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Lesser General Public License for more details. +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Lesser General Public License for more details. dnl -dnl You should have received a copy of the GNU Lesser General Public -dnl License along with this library; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl You should have received a copy of the GNU Lesser General Public +dnl License along with this library; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA dnl -dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com dnl AC_DEFUN([CHECK_PLATFORM],[ diff --git a/adm_local/unix/config_files/check_SMESH.m4 b/adm_local/unix/config_files/check_SMESH.m4 index 6a704081e..7965412f1 100644 --- a/adm_local/unix/config_files/check_SMESH.m4 +++ b/adm_local/unix/config_files/check_SMESH.m4 @@ -1,23 +1,23 @@ -dnl Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +dnl Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE dnl -dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS dnl -dnl This library is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Lesser General Public -dnl License as published by the Free Software Foundation; either -dnl version 2.1 of the License. +dnl This library is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Lesser General Public +dnl License as published by the Free Software Foundation; either +dnl version 2.1 of the License. dnl -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Lesser General Public License for more details. +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Lesser General Public License for more details. dnl -dnl You should have received a copy of the GNU Lesser General Public -dnl License along with this library; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl You should have received a copy of the GNU Lesser General Public +dnl License along with this library; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA dnl -dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com dnl # Check availability of SMesh binary distribution diff --git a/adm_local/unix/config_files/check_f77.m4 b/adm_local/unix/config_files/check_f77.m4 index e03c6c165..c8e98c332 100644 --- a/adm_local/unix/config_files/check_f77.m4 +++ b/adm_local/unix/config_files/check_f77.m4 @@ -1,23 +1,23 @@ -dnl Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +dnl Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE dnl -dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS dnl -dnl This library is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Lesser General Public -dnl License as published by the Free Software Foundation; either -dnl version 2.1 of the License. +dnl This library is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Lesser General Public +dnl License as published by the Free Software Foundation; either +dnl version 2.1 of the License. dnl -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Lesser General Public License for more details. +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Lesser General Public License for more details. dnl -dnl You should have received a copy of the GNU Lesser General Public -dnl License along with this library; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl You should have received a copy of the GNU Lesser General Public +dnl License along with this library; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA dnl -dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com dnl AC_DEFUN([CHECK_F77],[ diff --git a/adm_local/unix/config_files/check_qwt.m4 b/adm_local/unix/config_files/check_qwt.m4 index 736c5b5c8..0110df47d 100644 --- a/adm_local/unix/config_files/check_qwt.m4 +++ b/adm_local/unix/config_files/check_qwt.m4 @@ -1,23 +1,23 @@ -dnl Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE +dnl Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE dnl -dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +dnl Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS dnl -dnl This library is free software; you can redistribute it and/or -dnl modify it under the terms of the GNU Lesser General Public -dnl License as published by the Free Software Foundation; either -dnl version 2.1 of the License. +dnl This library is free software; you can redistribute it and/or +dnl modify it under the terms of the GNU Lesser General Public +dnl License as published by the Free Software Foundation; either +dnl version 2.1 of the License. dnl -dnl This library is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY; without even the implied warranty of -dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -dnl Lesser General Public License for more details. +dnl This library is distributed in the hope that it will be useful, +dnl but WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl Lesser General Public License for more details. dnl -dnl You should have received a copy of the GNU Lesser General Public -dnl License along with this library; if not, write to the Free Software -dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +dnl You should have received a copy of the GNU Lesser General Public +dnl License along with this library; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA dnl -dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +dnl See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com dnl AC_DEFUN([CHECK_QWT],[ AC_REQUIRE([CHECK_QT])dnl diff --git a/adm_local/unix/make_common_starter.am b/adm_local/unix/make_common_starter.am index 782a8154d..77936ec88 100644 --- a/adm_local/unix/make_common_starter.am +++ b/adm_local/unix/make_common_starter.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # ============================================================ diff --git a/bin/Makefile.am b/bin/Makefile.am index 35df158eb..d3d7ed1bc 100644 --- a/bin/Makefile.am +++ b/bin/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # -* Makefile *- diff --git a/bin/smesh_setenv.py b/bin/smesh_setenv.py index 0c1bcacc8..18b1dcc50 100644 --- a/bin/smesh_setenv.py +++ b/bin/smesh_setenv.py @@ -1,22 +1,22 @@ #!/usr/bin/env python # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # import os, sys diff --git a/build_cmake b/build_cmake index a0e084b95..174935b46 100755 --- a/build_cmake +++ b/build_cmake @@ -1,21 +1,21 @@ #!/bin/sh -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # CURRENT_DIR=`pwd` diff --git a/build_cmake.bat b/build_cmake.bat index 8de3956bf..2456e9cd9 100644 --- a/build_cmake.bat +++ b/build_cmake.bat @@ -1,20 +1,20 @@ -@REM Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +@REM Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE @REM -@REM This library is free software; you can redistribute it and/or -@REM modify it under the terms of the GNU Lesser General Public -@REM License as published by the Free Software Foundation; either -@REM version 2.1 of the License. +@REM This library is free software; you can redistribute it and/or +@REM modify it under the terms of the GNU Lesser General Public +@REM License as published by the Free Software Foundation; either +@REM version 2.1 of the License. @REM -@REM This library is distributed in the hope that it will be useful, -@REM but WITHOUT ANY WARRANTY; without even the implied warranty of -@REM MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -@REM Lesser General Public License for more details. +@REM This library is distributed in the hope that it will be useful, +@REM but WITHOUT ANY WARRANTY; without even the implied warranty of +@REM MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +@REM Lesser General Public License for more details. @REM -@REM You should have received a copy of the GNU Lesser General Public -@REM License along with this library; if not, write to the Free Software -@REM Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +@REM You should have received a copy of the GNU Lesser General Public +@REM License along with this library; if not, write to the Free Software +@REM Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @REM -@REM See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +@REM See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com @REM %PYTHONBIN% %KERNEL_ROOT_DIR%\salome_adm\cmake_files\am2cmake.py --smesh diff --git a/build_configure b/build_configure index 607c2558b..7368ce253 100755 --- a/build_configure +++ b/build_configure @@ -1,24 +1,24 @@ #!/bin/bash -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # Tool for updating list of .in file for the SALOME project diff --git a/clean_configure b/clean_configure index d123e509e..114762520 100755 --- a/clean_configure +++ b/clean_configure @@ -1,21 +1,21 @@ #!/bin/sh -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # rm -rf autom4te.cache aclocal.m4 configure make_config diff --git a/configure.ac b/configure.ac index b89fd137b..0548d07ca 100644 --- a/configure.ac +++ b/configure.ac @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # Author : Marc Tajchman (CEA) @@ -24,7 +24,7 @@ # Modified by : Alexander BORODIN (OCN) - autotools usage # Created from configure.in.base # -AC_INIT([Salome2 Project SMESH module], [6.2.0], [webmaster.salome@opencascade.com], [SalomeSMESH]) +AC_INIT([Salome2 Project SMESH module], [6.3.0], [webmaster.salome@opencascade.com], [SalomeSMESH]) AC_CONFIG_AUX_DIR(adm_local/unix/config_files) AC_CANONICAL_HOST AC_CANONICAL_TARGET @@ -327,6 +327,14 @@ echo CHECK_HDF5 +echo +echo --------------------------------------------- +echo testing MED2 +echo --------------------------------------------- +echo + +CHECK_MED2 + echo echo --------------------------------------------- echo BOOST Library @@ -395,9 +403,9 @@ echo Configure if test "${gui_ok}" = "yes"; then variables="cc_ok fortran_ok boost_ok lex_yacc_ok python_ok swig_ok threads_ok OpenGL_ok qt_ok vtk_ok hdf5_ok omniORB_ok occ_ok doxygen_ok graphviz_ok sphinx_ok qwt_ok Kernel_ok Geom_ok Med_ok gui_ok" elif test "${SalomeGUI_need}" != "no"; then - variables="cc_ok fortran_ok boost_ok lex_yacc_ok python_ok swig_ok threads_ok vtk_ok hdf5_ok omniORB_ok occ_ok doxygen_ok graphviz_ok sphinx_ok Kernel_ok Geom_ok Med_ok gui_ok" + variables="cc_ok fortran_ok boost_ok lex_yacc_ok python_ok swig_ok threads_ok vtk_ok hdf5_ok med2_ok omniORB_ok occ_ok doxygen_ok graphviz_ok sphinx_ok Kernel_ok Geom_ok Med_ok gui_ok" else - variables="cc_ok fortran_ok boost_ok lex_yacc_ok python_ok swig_ok threads_ok vtk_ok hdf5_ok omniORB_ok occ_ok doxygen_ok graphviz_ok sphinx_ok Kernel_ok Geom_ok Med_ok" + variables="cc_ok fortran_ok boost_ok lex_yacc_ok python_ok swig_ok threads_ok vtk_ok hdf5_ok med2_ok omniORB_ok occ_ok doxygen_ok graphviz_ok sphinx_ok Kernel_ok Geom_ok Med_ok" fi for var in $variables diff --git a/doc/Makefile.am b/doc/Makefile.am index 6cf4c8ea2..e5c494e51 100644 --- a/doc/Makefile.am +++ b/doc/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # -* Makefile *- diff --git a/doc/docutils/Makefile.am b/doc/docutils/Makefile.am index 573f4a4f0..eeec2fbf9 100644 --- a/doc/docutils/Makefile.am +++ b/doc/docutils/Makefile.am @@ -1,37 +1,36 @@ # -*- coding: iso-8859-1 -*- -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com include $(top_srcdir)/adm_local/unix/make_common_starter.am pydocdir = $(docdir)/tui/SMESH/docutils -.PHONY : latex +RSTFILES = \ + index.rst \ + overview.rst \ + docapi.rst -if SPHINX_IS_OK - -html/index.html:$(RSTFILES) - make htm - -endif +EXTRA_DIST += $(RSTFILES) SPHINXOPTS = SOURCEDIR = $(srcdir) @@ -43,7 +42,12 @@ SPHINX_PYTHONPATH = $(prefix)/lib/python$(PYTHON_VERSION)/site-packages/salome:$ SPHINX_LD_LIBRARY_PATH = $(KERNEL_ROOT_DIR)/lib/salome:$(OMNIORB_ROOT)/lib -htm: + +.PHONY: latex + +if SPHINX_IS_OK + +html/index.html:$(RSTFILES) mkdir -p html doctrees PYTHONPATH=$(SPHINX_PYTHONPATH):${PYTHONPATH} \ LD_LIBRARY_PATH=$(SPHINX_LD_LIBRARY_PATH):${LD_LIBRARY_PATH} \ @@ -51,6 +55,13 @@ htm: @echo @echo "Build finished. The HTML pages are in html." +else + +html/index.html: + @echo "Documentation for Python package not built. Sphinx was not present at configure time." + +endif + latex: mkdir -p latex doctrees PYTHONPATH=$(SPHINX_PYTHONPATH):${PYTHONPATH} \ @@ -61,16 +72,6 @@ latex: @echo "Run \`make all-pdf' or \`make all-ps' in that directory to" \ "run these through (pdf)latex." -html: - mkdir -p $@ - -RSTFILES= \ - index.rst \ - overview.rst \ - docapi.rst - -EXTRA_DIST+= $(RSTFILES) - install-data-local: html/index.html test -z $(pydocdir) || mkdir -p $(DESTDIR)$(pydocdir) if test -d "html"; then b=; else b="$(srcdir)/"; fi; \ @@ -84,5 +85,5 @@ clean-local: -rm -rf html latex doctrees if test -d "html"; then rm -rf html ; fi -disthook : +dist-hook: -test -d html && cp -Rp html $(distdir) diff --git a/doc/salome/Makefile.am b/doc/salome/Makefile.am index 4a09173c6..4de92c761 100644 --- a/doc/salome/Makefile.am +++ b/doc/salome/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # -* Makefile *- diff --git a/doc/salome/gui/Makefile.am b/doc/salome/gui/Makefile.am index f2e7362f1..055dd2105 100644 --- a/doc/salome/gui/Makefile.am +++ b/doc/salome/gui/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # File : Makefile.in diff --git a/doc/salome/gui/SMESH/Makefile.am b/doc/salome/gui/SMESH/Makefile.am index 46e6c4495..9f18316be 100755 --- a/doc/salome/gui/SMESH/Makefile.am +++ b/doc/salome/gui/SMESH/Makefile.am @@ -1,20 +1,20 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # # File : Makefile.in diff --git a/doc/salome/gui/SMESH/doxyfile.in b/doc/salome/gui/SMESH/doxyfile.in index 9995f1af6..167cd623b 100755 --- a/doc/salome/gui/SMESH/doxyfile.in +++ b/doc/salome/gui/SMESH/doxyfile.in @@ -1,24 +1,25 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- diff --git a/doc/salome/gui/SMESH/doxyfile_py.in b/doc/salome/gui/SMESH/doxyfile_py.in index dcb30d2b5..24803a00a 100755 --- a/doc/salome/gui/SMESH/doxyfile_py.in +++ b/doc/salome/gui/SMESH/doxyfile_py.in @@ -1,24 +1,25 @@ -# Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE +# Copyright (C) 2007-2011 CEA/DEN, EDF R&D, OPEN CASCADE # -# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, -# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS +# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, +# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS # -# This library is free software; you can redistribute it and/or -# modify it under the terms of the GNU Lesser General Public -# License as published by the Free Software Foundation; either -# version 2.1 of the License. +# This library is free software; you can redistribute it and/or +# modify it under the terms of the GNU Lesser General Public +# License as published by the Free Software Foundation; either +# version 2.1 of the License. # -# This library is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# Lesser General Public License for more details. +# This library is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. # -# You should have received a copy of the GNU Lesser General Public -# License along with this library; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# You should have received a copy of the GNU Lesser General Public +# License along with this library; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # -# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com +# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com # + #--------------------------------------------------------------------------- # Project related configuration options #--------------------------------------------------------------------------- diff --git a/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap1.png b/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap1.png index 6a9b37007..28e0ebc0f 100644 Binary files a/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap1.png and b/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap1.png differ diff --git a/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap2.png b/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap2.png index 6233b3850..57d5cceb2 100644 Binary files a/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap2.png and b/doc/salome/gui/SMESH/images/blsurf_parameters_sizemap2.png differ diff --git a/doc/salome/gui/SMESH/images/dialog.png b/doc/salome/gui/SMESH/images/dialog.png index 2f3bbed31..d5ab76687 100755 Binary files a/doc/salome/gui/SMESH/images/dialog.png and b/doc/salome/gui/SMESH/images/dialog.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_enforced_vertices_screenshot.png b/doc/salome/gui/SMESH/images/ghs3d_enforced_vertices_screenshot.png deleted file mode 100644 index fc885700f..000000000 Binary files a/doc/salome/gui/SMESH/images/ghs3d_enforced_vertices_screenshot.png and /dev/null differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot.png new file mode 100644 index 000000000..a9e7b972b Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf1.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf1.png new file mode 100644 index 000000000..8923f007a Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf1.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf2.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf2.png new file mode 100644 index 000000000..5daf8a269 Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf2.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf3.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf3.png new file mode 100644 index 000000000..f6911ce0b Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf3.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf4.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf4.png new file mode 100644 index 000000000..46f12d83c Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf4.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf5.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf5.png new file mode 100644 index 000000000..531b8126d Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf5.png differ diff --git a/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf6.png b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf6.png new file mode 100644 index 000000000..003f89f14 Binary files /dev/null and b/doc/salome/gui/SMESH/images/ghs3d_screenshot_enf6.png differ diff --git a/doc/salome/gui/SMESH/images/meshcut_plugin.png b/doc/salome/gui/SMESH/images/meshcut_plugin.png new file mode 100644 index 000000000..305e920d0 Binary files /dev/null and b/doc/salome/gui/SMESH/images/meshcut_plugin.png differ diff --git a/doc/salome/gui/SMESH/input/blsurf_hypo.doc b/doc/salome/gui/SMESH/input/blsurf_hypo.doc index cfcee93bb..99ea78e09 100644 --- a/doc/salome/gui/SMESH/input/blsurf_hypo.doc +++ b/doc/salome/gui/SMESH/input/blsurf_hypo.doc @@ -224,26 +224,6 @@ object or to its sub-shapes (created using Explode command). -\anchor blsurf_attractor -

Advanced maps

-\n -\image html blsurf_parameters_sizemap2.png -\n -Specific size maps, called attractors can be defined on faces. They allow to define the size of the mesh elements on a face so that the mesh is the finest on the attractor shape and becomes coarser when getting far from this shape. -The selected attractor can be either a Vertex or an Edge. The attractor doesn't have to be a sub-shape of the shape to mesh. -\n -Furthermore you can choose to keep the size constant until a certain distance from a shape. This option can be combined or not with the "attractor" size map described above. -\n -If the two options are combined the size will remain constant until the distant specified in "constant over" and grow then as prescribed by the attractor function. Else the growing is only controled by the standard arguments of BLSURF (gradation ...). - -\image html blsurf_attractors2.png "Example of mesh created using attractors, the attractors here are the side edges and the size grow from the side of the surface towards the apex" -\n -\image html blsurf_const_size_near_shape2.png "Example of size map with constant size option, the size is kept constant on the left side of the surface until a certain distance" -\n -Remark : The validation of the hypothesis might take a few seconds if attractors are defined or the "constant size" option is used because a map of distances has to be built on the whole surface for each face where such an hypothesis has been defined. - -
See Also a sample TUI Script of the \ref tui_blsurf "creation of a BLSurf hypothesis", including size map. - \anchor blsurf_sizemap_computation

Computation of the physical size

\n @@ -259,6 +239,37 @@ specification of the sizes. The computation depends on whether point P is intern In order to compute the mean of several values, the arithmetic mean is used by default, but this can be modified by the parameter \ref blsurf_hmean_flag "hmean flag". In the same way, in order to interpolate two values, a linear interpolation is used by default, but this can be modified by \ref blsurf_hinterpol_flag "hinterpol flag". +\anchor blsurf_attractor +

Advanced maps

+\n +\image html blsurf_parameters_sizemap2.png +\n +More specific size maps can be defined on faces. + + + +\image html blsurf_attractors2.png "Example of mesh created using attractors, the attractors here are the side edges and the size grow from the side of the surface towards the apex" +\n +\image html blsurf_const_size_near_shape2.png "Example of size map with constant size option, the size is kept constant on the left side of the surface until a certain distance" +\n +Remark : The validation of the hypothesis might take a few seconds if attractors are defined or the "constant size" option is used because a map of distances has to be built on the whole surface for each face where such an hypothesis has been defined. + +
See Also a sample TUI Script of the \ref tui_blsurf "creation of a BLSurf hypothesis", including size map. + \anchor blsurf_attractor_computation

Computation of attractors

\n @@ -270,7 +281,6 @@ Where :
  • d is the distance of the current point from the attractor shape. The distance is the geodesic distance (i.e. calculated by following the surface to be meshed)
  • R is called the distance of influence and allows controlling the growth rate of the mesh
  • -Warning : The formula is respected only if it doesn't imply a gradation bigger than the one set in the "Arguments" tab. So it's better to set it to its maximum value : 2.5.

    Custom enforced vertices

    diff --git a/doc/salome/gui/SMESH/input/cut_mesh_by_plane.doc b/doc/salome/gui/SMESH/input/cut_mesh_by_plane.doc new file mode 100644 index 000000000..d08914498 --- /dev/null +++ b/doc/salome/gui/SMESH/input/cut_mesh_by_plane.doc @@ -0,0 +1,55 @@ +/*! + +\page cut_mesh_by_plane_page Cut a tetrahedron mesh by a plane + +\n MeshCut works only on Med files and produces Med files, and is a standalone program. +It can be used either directly on a shell command outside SALOME, or with a GUI interface in SMESH, +provided in a python plugin that needs to be installed in your SALOME application. + +\n MeshCut allows to cut a mesh constituted of linear tetrahedrons by a plane. +\n The tetrahedrons intersected by the plane are cut and replaced by elements of various types, +(tetrahedron, pyramid, pentahedron). + +
    +\anchor meshcut_standalone +

    Using MeshCut as a standalone program, outside SALOME

    + +\n MeshCut is a standalone program, reading and producing med files. +\n +\n Syntax: +\code +MeshCut input.med output.med resuMeshName aboveGroup belowGroup nx ny nz px py pz T +\endcode + +\n +\n where: +\n input.med = name of the original mesh file in med format +\n output.med = name of the result mesh file in med format +\n resuMeshName = name of the result mesh +\n aboveGroup = name of the group of volumes above the cut plane +\n belowGroups = name of the group of volumes below the cut plane +\n nx ny nz = vector normal to the cut plane +\n px py pz = a point of the cut plane +\n T = 0 < T < 1 : vertices of a tetrahedron are considered as belonging to +\n the cut plane if their distance to the plane is inferior to L*T +\n where L is the mean edge size of the tetrahedron + +
    +\anchor meshcut_plugin +

    Using MeshCut inside SALOME

    + +When the MeshCut plugin is installed, you will find it in the Mesh menu, sub-menu SMESH_plugins. +\n If the plugin is not installed, look for a file named meshcut_plugin.py in your SMESH installation. +The file is normally in the subdirectory bin/salome/meshcut_plugin.py. + +\n If you already have plugins defined in a smesh_plugins.py file, add this file at the end. + if not, copy this file as ${HOME}/Plugins/smesh_plugins.py or ${APPLI}/Plugins/smesh_plugins.py + or in your ${PLUGINPATH} Directory. + +
  • From the Mesh menu, sub-menu SMESH_plugins, choose "MeshCut" item +The following dialog box will appear: +\image html meshcut_plugin.png "MeshCut Plugin dialog box" +
  • + +See above for the meaning of the parameters. +*/ diff --git a/doc/salome/gui/SMESH/input/generate_flat_elements.doc b/doc/salome/gui/SMESH/input/generate_flat_elements.doc new file mode 100644 index 000000000..36ecea7b8 --- /dev/null +++ b/doc/salome/gui/SMESH/input/generate_flat_elements.doc @@ -0,0 +1,12 @@ +/*! + +\page generate_flat_elements_page Generate flat elements on group boundaries or on faces + +\n These functionalities, used in some mechanics calculations, +allow to generate flat volume elements on the boundaries of a list +of groups of volumes, or on a list of groups of faces. +\n These functionalities are only available in python scripts. + +
    See a sample TUI Script of a \ref tui_double_nodes_on_group_boundaries "Generate flat elements" operations. + +*/ diff --git a/doc/salome/gui/SMESH/input/mesh_infos.doc b/doc/salome/gui/SMESH/input/mesh_infos.doc index 919f6768e..0d1cfbaf5 100644 --- a/doc/salome/gui/SMESH/input/mesh_infos.doc +++ b/doc/salome/gui/SMESH/input/mesh_infos.doc @@ -5,6 +5,14 @@ The user can obtain an information about the selected mesh object (mesh, sub-mesh or group) using Mesh Information dialog box. +To view the Mesh Information, select your mesh, sub-mesh or +group in the Object Browser and invoke Mesh Information +item from the \b Mesh menu or click "Mesh Information" button +in the toolbar. + +\image html image49.png +
    "Mesh Information" button
    + The Mesh Information dialog box provides two tab pages: - Base Info - to show base information about selected mesh object @@ -19,16 +27,6 @@ information on the selected object - mesh, sub-mesh or mesh group: name, type, total number of nodes and elements separately for each type: 0D elements, edges, faces and volumes. -To view the Mesh Information, select your mesh, sub-mesh or -group in the Object Browser and invoke Mesh Information -item from the \b Mesh menu or click "Mesh Information" button -in the toolbar. - -\image html image49.png -
    "Mesh Information" button
    - -The following information will be displayed: - \image html advanced_mesh_infos.png
    "Base Info" page
    @@ -39,21 +37,11 @@ The Element Info tab page of the dialog box gives basic information about the type, coordinates and connectivity of the selected mesh node or element. -To view the Mesh Element Information, select your mesh, sub-mesh or -group in the Object Browser and invoke Mesh Element Information -item from the \b Mesh menu or click "Mesh Element Information" button -in the toolbar. - -\image html elem_info.png -
    "Mesh Element Information" button
    - -The following information will be displayed: - \image html eleminfo1.png -
    "Element Info" page, node
    +
    "Element Info" page, node information

    \image html eleminfo2.png -
    "Element Info" page, element
    +
    "Element Info" page, element information
    The use can either input the ID of a node or element he wants to analyze directly in the dialog box or select the node or element in diff --git a/doc/salome/gui/SMESH/input/modifying_meshes.doc b/doc/salome/gui/SMESH/input/modifying_meshes.doc index 68248a408..6a8801f3e 100644 --- a/doc/salome/gui/SMESH/input/modifying_meshes.doc +++ b/doc/salome/gui/SMESH/input/modifying_meshes.doc @@ -48,6 +48,8 @@ of the selected node or edge.
  • \subpage convert_to_from_quadratic_mesh_page "Convert regular mesh to quadratic", or vice versa.
  • \subpage make_2dmesh_from_3d_page "Generate boundary elements".
  • +
  • \subpage generate_flat_elements_page "Generate flat elements on group boundaries or on faces".
  • +
  • \subpage cut_mesh_by_plane_page "Cut a tetrahedron mesh by a plane".
  • \note It is possible to use the variables defined in the SALOME \b NoteBook diff --git a/doc/salome/gui/SMESH/input/scale.doc b/doc/salome/gui/SMESH/input/scale.doc index e1c8dc31b..57626fd78 100644 --- a/doc/salome/gui/SMESH/input/scale.doc +++ b/doc/salome/gui/SMESH/input/scale.doc @@ -44,18 +44,17 @@ about filters in the \ref selection_filter_library_page "Selection filter librar
  • specify the conditions of scale:
  • diff --git a/doc/salome/gui/SMESH/input/tui_defining_blsurf_hypotheses.doc b/doc/salome/gui/SMESH/input/tui_defining_blsurf_hypotheses.doc index 3faba3da5..61827a73a 100644 --- a/doc/salome/gui/SMESH/input/tui_defining_blsurf_hypotheses.doc +++ b/doc/salome/gui/SMESH/input/tui_defining_blsurf_hypotheses.doc @@ -19,11 +19,17 @@ Face_1 = geompy.SubShapeAllSorted(box, geompy.ShapeType["FACE"])[0] Edge_1 = geompy.SubShapeAllSorted(box, geompy.ShapeType["EDGE"])[0] Vertex_1 = geompy.SubShapeAllSorted(box, geompy.ShapeType["VERTEX"])[0] +Face_2 = geompy.SubShapeAllSorted(box, geompy.ShapeType["FACE"])[5] +Wire_1 = geompy.SubShapeAllSorted(Face_2, geompy.ShapeType["WIRE"])[0] + # /!\ Geom object with sizemaps on them must be published in study geompy.addToStudyInFather(box,Face_1, "Face_1") geompy.addToStudyInFather(box,Edge_1, "Edge_1") geompy.addToStudyInFather(box,Vertex_1, "Vertex_1") +geompy.addToStudyInFather(box ,Face_2, "Face_2") +geompy.addToStudyInFather(Face_2,Wire_1, "Wire_1") + # create a mesh on the box blsurfMesh = smesh.Mesh(box,"box: BLSurf mesh") @@ -79,6 +85,21 @@ BLSURF_Parameters.UnsetEnforcedVertices(Face_1) # compute the mesh blsurfMesh.Compute() + +# Add an attractor on Face_2, which shape is Wire_1 + +# The size on Wire_1 is 1 and will grow until a maximum of 36.641 (physical size set above) +# The influence distance of the attractor is 20 +# The size is kept constant until a distance of 10 +BLSURF_Parameters.SetAttractorGeom(Face_2, Wire_1, 1, 36.641, 20, 10) + +# In order to let the attractor control the growing of the mesh let set +# the gradation to its maximum +BLSURF_Parameters.SetGradation( 2.5 ) + +# compute the mesh +blsurfMesh.Compute() + # End of script \endcode diff --git a/doc/salome/gui/SMESH/input/tui_defining_ghs3d_hypotheses.doc b/doc/salome/gui/SMESH/input/tui_defining_ghs3d_hypotheses.doc index 57a6aaf88..0146e81e3 100644 --- a/doc/salome/gui/SMESH/input/tui_defining_ghs3d_hypotheses.doc +++ b/doc/salome/gui/SMESH/input/tui_defining_ghs3d_hypotheses.doc @@ -20,26 +20,197 @@ ghs3dMesh = smesh.Mesh(box,"box: Ghs3D and BLSurf mesh") # create a BLSurf algorithm for faces BLSURF = ghs3dMesh.Triangle(algo=smesh.BLSURF) - -# create a Ghs3D algorithm for volume GHS3D = ghs3dMesh.Tetrahedron(algo=smesh.GHS3D) -# get Ghs3D algorithm hypothesis -GHS3D_Parameters = GHS3D.Parameters() - -# define an enforced vertex at (50,50,100) with a physical size of 2 -GHS3D_Parameters.SetEnforcedVertex( 50, 50, 100, 2 ) - -# define an enforced vertex at (150,150,100) with a physical size of 5 -GHS3D_Parameters.SetEnforcedVertex( 150, 150, 100, 5 ) - # compute the mesh ghs3dMesh.Compute() +# End of script +\endcode + +\image html ghs3d_screenshot.png Ghs3d mesh withtout hypothesis + +

    Adding enforced vertices

    + +\code + +# An enforced vertex can be added via: +# - the coordinates x,y,z +# - a GEOM vertex or compound (No geometry, TUI only) +# +# The enforced nodes created can also be stored in +# a group (No geometry, TUI only). + +# Ex1: Add 1 enforced vertices by coords at (50,50,100) +# with a physical size of 2 + +import geompy +import smesh +import BLSURFPlugin +import GHS3DPlugin + +# create a box +box = geompy.MakeBoxDXDYDZ(200., 200., 200.) +geompy.addToStudy(box, "box") +# create a mesh on the box +ghs3dMesh = smesh.Mesh(box,"box: Ghs3D and BLSurf mesh") +# create a BLSurf algorithm for faces +ghs3dMesh.Triangle(algo=smesh.BLSURF) +# compute the mesh +ghs3dMesh.Compute() + +# Make a copy of the 2D mesh +ghs3dMesh_wo_geometry = smesh.CopyMesh( ghs3dMesh, 'Ghs3D wo geometry', 0, 0) + +# create a Ghs3D algorithm and hypothesis and assign them to the mesh +GHS3D = smesh.CreateHypothesis('GHS3D_3D', 'GHS3DEngine') +GHS3D_Parameters = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +ghs3dMesh.AddHypothesis( GHS3D ) +ghs3dMesh.AddHypothesis( GHS3D_Parameters ) +# Create the enforced vertex +GHS3D_Parameters.SetEnforcedVertex( 50, 50, 100, 2) # no group +# Compute the mesh +ghs3dMesh.Compute() + + +# Ex2: Add 1 enforced vertices by GEOM vertex at (50,50,100) +# with a physical size of 5 and add it to a group called "My special nodes" + +# Create another GHS3D hypothesis and assign it to the mesh wo geometry +GHS3D_Parameters_wo_geometry = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +ghs3dMesh_wo_geometry.AddHypothesis( GHS3D ) +ghs3dMesh_wo_geometry.AddHypothesis( GHS3D_Parameters_wo_geometry ) + +# Create the enforced vertex +p1 = geompy.MakeVertex(150, 150, 100) +geompy.addToStudy(p1, "p1") +GHS3D_Parameters_wo_geometry.SetEnforcedVertexGeomWithGroup( p1, 5 , "My special nodes") +#GHS3D_Parameters.SetEnforcedVertexGeom( p1, 5 ) # no group + +# compute the mesh +ghs3dMesh_wo_geometry.Compute() + +# Erase all enforced vertices +GHS3D_Parameters.ClearEnforcedVertices() + # End of script \endcode -\image html ghs3d_enforced_vertices_screenshot.png +\image html ghs3d_screenshot_enf1.png Ghs3d mesh with enforced vertex +\image html ghs3d_screenshot_enf2.png Ghs3d mesh with enforced vertex from GEOM vertex + +

    Adding enforced mesh

    + +\code + +# It is possible to constraint GHS3D with another mesh or group. +# The constraint can be the nodes, edges or faces. +# This feature is available only in TUI, on meshes without geometry. +# The constraining elements are called enforced elements for the mesh. +# They can be recovered using groups if necessary. + +# In the following examples, a box and a cylinder are meshed. +# The mesh of the cylinder will be used as a constraint for the +# 3D mesh of the box. + +import geompy +import smesh +import BLSURFPlugin +import GHS3DPlugin + +box = geompy.MakeBoxDXDYDZ(200, 200, 200) +geompy.addToStudy( box, "box" ) +cylindre = geompy.MakeCylinderRH(50, 50) +geompy.TranslateDXDYDZ(cylindre, 100, 100, 30) +face_cyl = geompy.ExtractShapes(cylindre, geompy.ShapeType["FACE"], True)[1] +geompy.addToStudy( cylindre, 'cylindre' ) +geompy.addToStudyInFather( cylindre, face_cyl, 'face_cyl' ) +p1 = geompy.MakeVertex(20, 20, 20) +p2 = geompy.MakeVertex(180, 180, 20) +c = geompy.MakeCompound([p1,p2]) +geompy.addToStudy( p1, "p1" ) +geompy.addToStudy( p2, "p2" ) +geompy.addToStudy( c, "c" ) + +# Create the 2D algo and hypothesis +BLSURF = smesh.CreateHypothesis('BLSURF', 'BLSURFEngine') +# For the box +BLSURF_Parameters = smesh.CreateHypothesis('BLSURF_Parameters', 'BLSURFEngine') +BLSURF_Parameters.SetPhysicalMesh( 1 ) +BLSURF_Parameters.SetPhySize( 200 ) +# For the cylinder +BLSURF_Parameters2 = smesh.CreateHypothesis('BLSURF_Parameters', 'BLSURFEngine') +BLSURF_Parameters2.SetGeometricMesh( 1 ) + +# Create the 3D algo and hypothesis +GHS3D = smesh.CreateHypothesis('GHS3D_3D', 'GHS3DEngine') +GHS3D_Parameters_node = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +#GHS3D_Parameters_node.SetToMeshHoles( 1 ) +GHS3D_Parameters_edge = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +#GHS3D_Parameters_edge.SetToMeshHoles( 1 ) +GHS3D_Parameters_face = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +GHS3D_Parameters_face.SetToMeshHoles( 1 ) # to mesh inside the cylinder +GHS3D_Parameters_mesh = smesh.CreateHypothesis('GHS3D_Parameters', 'GHS3DEngine') +GHS3D_Parameters_mesh.SetToMeshHoles( 1 ) # to mesh inside the cylinder + +# Create the mesh on the cylinder +Mesh_cylindre = smesh.Mesh(cylindre) +SetName(Mesh_cylindre,"Mesh_cylindre") +Mesh_cylindre.AddHypothesis( BLSURF ) +Mesh_cylindre.AddHypothesis( BLSURF_Parameters2 ) +# Create some groups +face_cyl_faces = Mesh_cylindre.GroupOnGeom(face_cyl,'group_face_cyl', smesh.FACE) +face_cyl_edges = Mesh_cylindre.GroupOnGeom(face_cyl,'group_edge_cyl', smesh.EDGE) +face_cyl_nodes = Mesh_cylindre.GroupOnGeom(face_cyl,'group_node_cyl', smesh.NODE) +Mesh_cyl_tri.Compute() + +# Create the mesh on the cylinder +Mesh_box_tri = smesh.Mesh(box) +SetName(Mesh_box_tri,"Mesh_box_tri") +Mesh_box_tri.AddHypothesis( BLSURF ) +Mesh_box_tri.AddHypothesis( BLSURF_Parameters ) +Mesh_box_tri.Compute() + +# Create 4 copies of the 2D mesh to test the 3 types of contraints (NODE, EDGE, FACE) +# from a whole mesh and from groups of elements. +# Then the 3D algo and hypothesis are assigned to them. + +mesh_mesh = smesh.CopyMesh( Mesh_box_tri, 'Enforced by faces of mesh', 0, 0) +mesh_mesh.AddHypothesis( GHS3D_3D ) +mesh_mesh.AddHypothesis( GHS3D_Parameters_mesh) + +mesh_node = smesh.CopyMesh( Mesh_box_tri, 'Enforced by group of nodes', 0, 0) +mesh_node.AddHypothesis( GHS3D_3D ) +mesh_node.AddHypothesis( GHS3D_Parameters_node) + +mesh_edge = smesh.CopyMesh( Mesh_box_tri, 'Enforced by group of edges', 0, 0) +mesh_edge.AddHypothesis( GHS3D_3D ) +mesh_edge.AddHypothesis( GHS3D_Parameters_edge) + +mesh_face = smesh.CopyMesh( Mesh_box_tri, 'Enforced by group of faces', 0, 0) +mesh_face.AddHypothesis( GHS3D_3D ) +mesh_face.AddHypothesis( GHS3D_Parameters_face) + +# Add the enforced elements +GHS3D_Parameters_mesh.SetEnforcedMeshWithGroup(Mesh_cylindre.GetMesh(),smesh.FACE,"faces from cylinder") +GHS3D_Parameters_node.SetEnforcedMeshWithGroup(face_cyl_nodes,smesh.NODE,"nodes from face_cyl_nodes") +GHS3D_Parameters_edge.SetEnforcedMeshWithGroup(face_cyl_edges,smesh.EDGE,"edges from face_cyl_edges") +GHS3D_Parameters_face.SetEnforcedMeshWithGroup(face_cyl_faces,smesh.FACE,"faces from face_cyl_faces") + +#Compute the meshes +mesh_node.Compute() +mesh_edge.Compute() +mesh_face.Compute() +mesh_mesh.Compute() + +# End of script + +\endcode + +\image html ghs3d_screenshot_enf3.png +\image html ghs3d_screenshot_enf4.png +\image html ghs3d_screenshot_enf5.png +\image html ghs3d_screenshot_enf6.png */ \ No newline at end of file diff --git a/doc/salome/gui/SMESH/input/tui_filters.doc b/doc/salome/gui/SMESH/input/tui_filters.doc index aa3e1eb1c..48c108fe5 100755 --- a/doc/salome/gui/SMESH/input/tui_filters.doc +++ b/doc/salome/gui/SMESH/input/tui_filters.doc @@ -689,4 +689,25 @@ print "Number of tetrahedrons:", len(ids_tet) print "Number of pyramids:", len(ids_pyr) \endcode +\section combining_filters How to combine filters with Criterion structures? + +Filters can be combined by making use of "criteria". + +Example : + +\code +# create mesh +from SMESH_mechanic import * +# get all the quadrangle faces ... +criterion1 = smesh.GetCriterion(smesh.FACE, smesh.FT_ElemGeomType, smesh.Geom_QUADRANGLE, smesh.FT_LogicalAND) +# ... AND do NOT get those from sub_face3 +criterion2 = smesh.GetCriterion(smesh.FACE, smesh.FT_BelongToGeom, sub_face3, smesh.FT_LogicalNOT) +filter = smesh.CreateFilterManager().CreateFilter() +filter.SetCriteria([criterion1,criterion2]) +ids = mesh.GetIdsFromFilter(filter) + +myGroup = mesh.MakeGroupByIds("Quads_on_cylindrical_faces",smesh.FACE,ids) +\endcode + + */ diff --git a/doc/salome/gui/SMESH/input/tui_generate_flat_elements.doc b/doc/salome/gui/SMESH/input/tui_generate_flat_elements.doc new file mode 100644 index 000000000..eb336888f --- /dev/null +++ b/doc/salome/gui/SMESH/input/tui_generate_flat_elements.doc @@ -0,0 +1,75 @@ +/*! + +\page tui_generate_flat_elements_page Generate flat elements + +
    +\anchor tui_double_nodes_on_group_boundaries +

    Double nodes on groups boundaries

    + +\n Double nodes on shared faces between groups of volumes and create flat elements on demand. +\n The list of groups must describe a partition of the mesh volumes.The nodes of the internal +faces at the boundaries of the groups are doubled. In option, the internal faces are replaced +by flat elements. +\n Triangles are transformed in prisms, and quadrangles in hexahedrons. +\n The flat elements are stored in groups of volumes. + +\n +\n This example represents an iron cable (a thin cylinder) in a concrete bloc (a big cylinder). +The big cylinder is defined by two geometric volumes. + +\code +# geometry + +O = geompy.MakeVertex(0, 0, 0) +OX = geompy.MakeVectorDXDYDZ(1, 0, 0) +OY = geompy.MakeVectorDXDYDZ(0, 1, 0) +OZ = geompy.MakeVectorDXDYDZ(0, 0, 1) +Vertex_1 = geompy.MakeVertex(50, 0, 0) +Cylinder_1 = geompy.MakeCylinder(O, OX, 10, 500) +Cylinder_2 = geompy.MakeCylinder(Vertex_1, OX, 100, 400) +Vertex_2 = geompy.MakeVertex(-200, -200, -200) +Vertex_3 = geompy.MakeVertex(250, 200, 200) +Box_1 = geompy.MakeBoxTwoPnt(Vertex_2, Vertex_3) +Cut_1 = geompy.MakeCut(Cylinder_2, Cylinder_1) +Partition_2 = geompy.MakePartition([Cut_1], [Box_1], [], [], geompy.ShapeType["SOLID"], 0, [], 0) +Fuse_1 = geompy.MakeFuse(Partition_2, Cylinder_1) +Partition_1 = geompy.MakePartition([Fuse_1], [Cylinder_1], [], [], geompy.ShapeType["SOLID"], 0, [], 0) +[Solid_1,Solid_2,Solid_3] = geompy.SubShapes(Partition_1, [53, 2, 30]) +[Face_1,Face_2] = geompy.SubShapes(Partition_1, [37, 20]) + +# meshing (linear tetrahedrons here, but other elements are OK) + +Mesh_1 = smesh.Mesh(Partition_1) +BLSURF = Mesh_1.Triangle(algo=smesh.BLSURF) +BLSURF_Parameters = BLSURF.Parameters() +BLSURF_Parameters.SetPhysicalMesh( 0 ) +BLSURF_Parameters.SetGeometricMesh( 1 ) +BLSURF_Parameters.SetAngleMeshS( 16 ) +BLSURF_Parameters.SetAngleMeshC( 16 ) +GHS3D_3D = Mesh_1.Tetrahedron(algo=smesh.GHS3D) +isDone = Mesh_1.Compute() + +# relevant groups of volumes and faces + +Solid_1_1 = Mesh_1.GroupOnGeom(Solid_1,'Solid_1',SMESH.VOLUME) +Solid_2_1 = Mesh_1.GroupOnGeom(Solid_2,'Solid_2',SMESH.VOLUME) +Solid_3_1 = Mesh_1.GroupOnGeom(Solid_3,'Solid_3',SMESH.VOLUME) +Face_1_1 = Mesh_1.GroupOnGeom(Face_1,'Face_1',SMESH.FACE) +Face_2_1 = Mesh_1.GroupOnGeom(Face_2,'Face_2',SMESH.FACE) + +\endcode + +\n Here, the 3 groups of volumes [Solid_1_1, Solid_2_1, Solid_3_1] constitute a partition of the mesh. +The flat elements on group boundaries and on faces are built with the following code. +\n If the last argument (boolean) in DoubleNodesOnGroupBoundaries is set to 1, +the flat elements are built, otherwise, there is only a duplication of the nodes. + +\code +Mesh_1.DoubleNodesOnGroupBoundaries([Solid_1_1, Solid_2_1, Solid_3_1], 1) + +Mesh_1.CreateFlatElementsOnFacesGroups([Face_1_1, Face_2_1]) +\endcode + +\n To observe the flat element groups, save the resulting mesh on a Med file and reload it. + +*/ diff --git a/doc/salome/gui/SMESH/input/viewing_meshes_overview.doc b/doc/salome/gui/SMESH/input/viewing_meshes_overview.doc index 17f4c5f7f..1c0c434a3 100644 --- a/doc/salome/gui/SMESH/input/viewing_meshes_overview.doc +++ b/doc/salome/gui/SMESH/input/viewing_meshes_overview.doc @@ -17,16 +17,16 @@ right-clicking on the selected mesh. \image html dialog.png