[bos #40650][CEA 33012] Beta Law distribution: added a new type of distribution for Wire Discretisation algorith Number of Segments.

doc/gui/input/1d_meshing_hypo.rst

@@ -199,6 +199,23 @@ The node distribution is computed so that to have the density function integral
 .. image:: ../images/distributionwithtabledensity.png
 	:align: center
 
+**Beta Law Distribution** - is given by the following formula (see image below) where **t** is the position of the point in the segment [0, 1].
+
+.. image:: ../images/nbsegment_beta_law_formula.png
+	:align: center
+
+The beta parameter is usually set between 1.01 (narrow mesh) and 1.00001 (very narrow mesh). 
+Values between [-1, 1] are forbidden to ensure validity of the log. 
+Negative values are allowed and result with positions distributed in the opposite direction.
+
+.. image:: ../images/nbsegments_beta_law_dlg.png
+	:align: center
+
+Below is an example of **Beta Law Distribution** for a face that was done using default **Expansion coefficient** value 1.01.
+
+.. image:: ../images/nbsegments_beta_law_example.png
+	:align: center
+
 
 **See Also** a sample TUI Script of :ref:`Defining Number of Segments <tui_deflection_1d>` hypothesis operation.
 

idl/SMESH_BasicHypothesis.idl

@@ -201,6 +201,18 @@ module StdMeshers
     double GetScaleFactor()
       raises (SALOME::SALOME_Exception);
 
+    /*!
+     * Sets <beta> coefficient for Beta Law distribution
+     */
+    void SetBeta(in double beta)
+      raises (SALOME::SALOME_Exception);
+
+    /*!
+     * Returns <beta> coefficient for Beta Law distribution
+     */
+    double GetBeta()
+      raises (SALOME::SALOME_Exception);
+
     /*!
      * Sets <table function> parameter value for distribution DT_TabFunc
      */

src/SMESHGUI/CMakeLists.txt

@@ -89,6 +89,7 @@ SET(_moc_HEADERS
   SMESHGUI_CreatePatternDlg.h
   SMESHGUI_NodesDlg.h
   SMESHGUI_SpinBox.h
+  SMESHGUI_SpinBoxForbiddendRange.h
   SMESHGUI_TransparencyDlg.h
   SMESHGUI_ClippingDlg.h
   SMESHGUI_GroupDlg.h
@@ -203,6 +204,7 @@ SET(_other_SOURCES
   SMESHGUI_CreatePatternDlg.cxx
   SMESHGUI_NodesDlg.cxx
   SMESHGUI_SpinBox.cxx
+  SMESHGUI_SpinBoxForbiddendRange.cxx
   SMESHGUI_TransparencyDlg.cxx
   SMESHGUI_ClippingDlg.cxx
   SMESHGUI_GroupDlg.cxx

src/SMESHGUI/SMESHGUI_SpinBoxForbiddendRange.cxx

@@ -0,0 +1,197 @@
+// Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
+//
+// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+// SMESH SMESHGUI : GUI for SMESH component
+// File   : SMESHGUI_SpinBoxForbiddendRange.cxx
+// Author : Konstantin Leontev, Open CASCADE S.A.S.
+// SMESH includes
+//
+#include "SMESHGUI_SpinBoxForbiddendRange.h"
+
+#include <QToolTip>
+
+#include "utilities.h"
+
+
+//=================================================================================
+// class    : SMESHGUI_SpinBoxForbiddendRange()
+// purpose  : constructor
+//=================================================================================
+SMESHGUI_SpinBoxForbiddendRange::SMESHGUI_SpinBoxForbiddendRange(QWidget* parent)
+  : SMESHGUI_SpinBox(parent), forbiddenMin(0.0), forbiddenMax(1.0)
+{
+  // This property allows to return QValidator::Invalid from QtxDoubleSpinBox::validate()
+  // for any values outside of the min/max range.
+  // Otherwise a user could type any intermediate value.
+  setProperty("strict_validity_check", true);
+}
+
+//=================================================================================
+// function : ~SMESHGUI_SpinBoxForbiddendRange()
+// purpose  : destructor
+//=================================================================================
+SMESHGUI_SpinBoxForbiddendRange::~SMESHGUI_SpinBoxForbiddendRange()
+{
+}
+
+//=================================================================================
+// function : stepBy()
+// purpose  : Validates value in ranges on each step
+//=================================================================================
+void SMESHGUI_SpinBoxForbiddendRange::stepBy(const int steps)
+{
+  double const newValue = value() + (steps * singleStep());
+  double const validatedValue = GetValueInRange(newValue);
+
+  setValue(validatedValue);
+}
+
+//=================================================================================
+// function : valueFromText()
+// purpose  : Validates value entered by user 
+//=================================================================================
+double SMESHGUI_SpinBoxForbiddendRange::valueFromText(QString const& text) const
+{
+  double const newValue = SMESHGUI_SpinBox::valueFromText(text);
+  return GetValueInRange(newValue);
+}
+
+QValidator::State SMESHGUI_SpinBoxForbiddendRange::validate(QString& text, int& pos) const
+{
+  // Do parent's min/max and all other validation first
+  const QValidator::State res = SMESHGUI_SpinBox::validate(text, pos);
+  if (res != QValidator::Acceptable)
+    return res;
+
+  // Now we know that we have a valid numeric value in the text
+  // that we can check against forbidden range.
+  bool ok = false;
+  const double inputValue = text.toDouble(&ok);
+
+  // Return intermediate to allow a user input any value.
+  // If press ok button, it will be checked again with checkRange() call.
+  const QValidator::State state = ok && IsValueInRange(inputValue) ?
+    QValidator::Acceptable : QValidator::Intermediate;
+
+  showValidationToolTip(state);
+
+  return state;
+}
+
+//=================================================================================
+// function : SetForbiddenRange()
+// purpose  : Sets min and max values for forbidden range
+//=================================================================================
+void SMESHGUI_SpinBoxForbiddendRange::SetForbiddenRange(const double min, const double max)
+{
+  forbiddenMin = min;
+  forbiddenMax = max;
+}
+
+//=================================================================================
+// function : checkRange()
+// purpose  : adds checking against forbidden range to the parent's inmplementation
+//=================================================================================
+bool SMESHGUI_SpinBoxForbiddendRange::checkRange(const double value) const
+{
+  return SalomeApp_DoubleSpinBox::checkRange(value) && IsValueInRange(value);
+}
+
+//=================================================================================
+// function : IsValueInRange()
+// purpose  : Validates a given value against forbidden range
+//=================================================================================
+bool SMESHGUI_SpinBoxForbiddendRange::IsValueInRange(const double inputValue) const
+{
+  // A given value must be outside of [forbiddenMin, forbiddenMax] scope
+  return inputValue < forbiddenMin || inputValue > forbiddenMax;
+}
+
+//=================================================================================
+// function : GetValueInRange()
+// purpose  : Validates value considering forbidden range
+//=================================================================================
+double SMESHGUI_SpinBoxForbiddendRange::GetValueInRange(const double inputValue) const
+{
+  // Check if a given value is outside of [forbiddenMin, forbiddenMax] scope
+  if (IsValueInRange(inputValue))
+    return inputValue;
+
+  const double curValue = value();
+  const double step = SMESHGUI_SpinBox::singleStep();
+
+  // Find the nearest value outside of forbidden range
+  if (inputValue > curValue)
+    return forbiddenMax + step;
+  else
+    return forbiddenMin - step;
+}
+
+//=================================================================================
+// function : showValidationToolTip()
+// purpose  : Shows tooltip with a valid range
+//=================================================================================
+void SMESHGUI_SpinBoxForbiddendRange::showValidationToolTip(const QValidator::State state) const
+{
+  if (state == QValidator::Acceptable)
+  {
+    QToolTip::hideText();
+    return;
+  }
+
+  // All the rest is an edited copy from SalomeApp_DoubleSpinBox::validate()
+
+  // Get position and min/max values
+  const QPoint pos(size().width(), 0.);
+  const QPoint globalPos = mapToGlobal(pos);
+  const QString minVal = textFromValue(minimum());
+  const QString maxVal = textFromValue(maximum());
+
+  // Same stuff as in QtxDoubleSpinBox::textFromValue()
+  int digits = getPrecision();
+
+  // For 'g' format, max. number of digits after the decimal point is getPrecision() - 1
+  // See also QtxDoubleSpinBox::validate()
+  if (digits < 0)
+    digits = qAbs(digits) - 1;
+
+  QString msg = QString(tr("VALID_RANGE_NOVAR_MSG")).
+    arg(minVal).
+    arg(forbiddenMin).
+    arg(forbiddenMax).
+    arg(maxVal).
+    arg(digits);
+
+  // It is not possible to hide and shortly afterwards reshow a tooltip
+  // with the same text because of some interference between the internal hideTimer of the tooltip and
+  // the QToolTip::showText(). As a result, the tooltip does not persist - it disappears immediately.
+  // If we are here, then QToolTip::hideText() was just called from the parent.
+  // So, below is a workaround that changes the text and lets the tooltip stay in place.
+  toolTipFlag = !toolTipFlag;
+  if (toolTipFlag)
+  {
+    msg.append(" ");
+  }
+
+  // Show tooltip
+  QToolTip::showText(globalPos, msg, const_cast<SMESHGUI_SpinBoxForbiddendRange*>(this));
+}

src/SMESHGUI/SMESHGUI_SpinBoxForbiddendRange.h

@@ -0,0 +1,66 @@
+// Copyright (C) 2007-2024  CEA, EDF, OPEN CASCADE
+//
+// Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+// SMESH SMESHGUI : GUI for SMESH component
+// File   : SMESHGUI_SpinBoxForbiddendRange.h
+// Author : Konstantin Leontev, Open CASCADE S.A.S.
+//
+#ifndef SMESHGUI_SPINBOXFORBIDDENRANGE_H
+#define SMESHGUI_SPINBOXFORBIDDENRANGE_H
+
+// SMESH includes
+#include "SMESHGUI_SpinBox.h"
+
+
+//=================================================================================
+// class    : SMESHGUI_SpinBoxForbiddendRange
+// purpose  : Allows validating with a range of forbidden values 
+//=================================================================================
+class SMESHGUI_EXPORT SMESHGUI_SpinBoxForbiddendRange : public SMESHGUI_SpinBox
+{
+  Q_OBJECT
+
+public:
+  SMESHGUI_SpinBoxForbiddendRange(QWidget*);
+  ~SMESHGUI_SpinBoxForbiddendRange();
+
+  virtual void stepBy(const int steps) override;
+  virtual double valueFromText(QString const& text) const override;
+  virtual QValidator::State validate(QString& text, int& pos) const override;
+
+  void SetForbiddenRange(const double min, const double max);
+
+protected:
+  virtual bool checkRange(const double value) const override;
+  bool IsValueInRange(const double value) const;
+  double GetValueInRange(const double value) const;
+
+  virtual void showValidationToolTip(const QValidator::State state) const override;
+private:
+  double forbiddenMin;
+  double forbiddenMax;
+
+  mutable bool toolTipFlag = false;
+};
+
+#endif // SMESHGUI_SPINBOXFORBIDDENRANGE_H
+

src/SMESHGUI/SMESH_msg_en.ts

@@ -9154,4 +9154,12 @@ red in the Object Browser.</translation>
         <translation>Mean Size</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_SpinBoxForbiddendRange</name>
+    <message>
+        <source>VALID_RANGE_NOVAR_MSG</source>
+        <translation>Specify a floating-point value in range [%1; %2) U (%3; %4]
+with %5-digit precision</translation>
+    </message>
+</context>
 </TS>

src/SMESHGUI/SMESH_msg_fr.ts

@@ -9172,4 +9172,12 @@ en rouge dans le browser.</translation>
         <translation>Taille moyenne</translation>
     </message>
 </context>
+<context>
+    <name>SMESHGUI_SpinBoxForbiddendRange</name>
+    <message>
+        <source>VALID_RANGE_NOVAR_MSG</source>
+        <translation>Spécifier une valeur à virgule flottante dans la plage [%1; %2) U (%3; %4]
+avec une précision de %5 chiffres</translation>
+    </message>
+</context>
 </TS>

src/SMESHGUI/SMESH_msg_ja.ts

@@ -8286,4 +8286,12 @@ pip install meshio[all]</translation>
       <translation>オプション値</translation>
     </message>
   </context>
+<context>
+  <name>SMESHGUI_SpinBoxForbiddendRange</name>
+  <message>
+      <source>VALID_RANGE_NOVAR_MSG</source>
+      <translation>範囲内の浮動小数点値を指定します [%1; %2) U (%3; %4]
+%5 桁の精度</translation>
+  </message>
+</context>
 </TS>

src/SMESH_SWIG/StdMeshersBuilder.py

@@ -188,7 +188,7 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm):
         hyp.SetUsePreestimatedLength( length == 0.0 )
         return hyp
 
-    def NumberOfSegments(self, n, s=[], reversedEdges=[], UseExisting=0):
+    def NumberOfSegments(self, n, s=[], reversedEdges=[], UseExisting=0, beta=None):
         """
         Defines "NumberOfSegments" hypothesis to cut an edge in a fixed number of segments
 
@@ -199,6 +199,7 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm):
                     A list item can also be a tuple (edge, 1st_vertex_of_edge)
             UseExisting: if ==true - searches for an existing hypothesis created with
                     the same parameters, else (default) - create a new one
+            beta: beta coefficient for Beta Law distribution
     
         Returns: 
             an instance of StdMeshers_NumberOfSegments hypothesis
@@ -209,15 +210,22 @@ class StdMeshersBuilder_Segment(Mesh_Algorithm):
             reversedEdges, UseExisting = [], reversedEdges
         entry = self.MainShapeEntry()
         reversedEdgeInd = self.ReversedEdgeIndices(reversedEdges)
-        if not s:
+
-            hyp = self.Hypothesis("NumberOfSegments", [n, reversedEdgeInd, entry],
+        args = [n, reversedEdgeInd, entry]
-                                  UseExisting=UseExisting,
+        if s:
-                                  CompareMethod=self._compareNumberOfSegments)
+            args.insert(1, s)
-        else:
+        elif beta:
-            hyp = self.Hypothesis("NumberOfSegments", [n,s, reversedEdgeInd, entry],
+            args.append(beta)
-                                  UseExisting=UseExisting,
+
-                                  CompareMethod=self._compareNumberOfSegments)
+        hyp = self.Hypothesis(
+            "NumberOfSegments", args,
+            UseExisting=UseExisting, CompareMethod=self._compareNumberOfSegments)
+
+        if s:
             hyp.SetScaleFactor(s)
+        elif beta:
+            hyp.SetBeta(s)
+
         hyp.SetNumberOfSegments(n)
         hyp.SetReversedEdges( reversedEdgeInd )
         hyp.SetObjectEntry( entry )

src/StdMeshers/StdMeshers_NumberOfSegments.cxx

@@ -139,7 +139,7 @@ smIdType StdMeshers_NumberOfSegments::GetNumberOfSegments() const
 
 void StdMeshers_NumberOfSegments::SetDistrType(DistrType typ)
 {
-  if (typ < DT_Regular || typ > DT_ExprFunc)
+  if (!IsValidDistrType(typ))
     throw SALOME_Exception(LOCALIZED("distribution type is out of range"));
 
   if (typ != _distrType)
@@ -166,6 +166,18 @@ StdMeshers_NumberOfSegments::DistrType StdMeshers_NumberOfSegments::GetDistrType
  */
 //================================================================================
 
+bool StdMeshers_NumberOfSegments::IsValidDistrType(int distrType) const
+{
+  // DistrType is sequential, so we can just check against its first and last values 
+  return distrType >= DT_Regular && distrType <= DT_BetaLaw;
+}
+
+//================================================================================
+/*!
+ * 
+ */
+//================================================================================
+
 void StdMeshers_NumberOfSegments::SetScaleFactor(double scaleFactor)
 {
   if (scaleFactor < PRECISION)
@@ -204,6 +216,43 @@ double StdMeshers_NumberOfSegments::GetScaleFactor() const
  */
 //================================================================================
 
+void StdMeshers_NumberOfSegments::SetBeta(double beta)
+{
+  if (_distrType != DT_BetaLaw)
+    throw SALOME_Exception(LOCALIZED("not a Beta Law distribution"));
+
+  const double diff = fabs(fabs(_beta) - fabs(beta));
+  if (diff <= PRECISION)
+  {
+    // Check for a special case where we have values with
+    // equal base but opposite signs like -1.01 and 1.01
+    if (std::signbit(_beta) == std::signbit(beta))
+      return;
+  }
+
+  _beta = beta;
+  NotifySubMeshesHypothesisModification();
+}
+
+//================================================================================
+/*!
+ *
+ */
+//================================================================================
+
+double StdMeshers_NumberOfSegments::GetBeta() const
+{
+  if (_distrType != DT_BetaLaw)
+    throw SALOME_Exception(LOCALIZED("not a Beta Law distribution"));
+  return _beta;
+}
+
+//================================================================================
+/*!
+ *
+ */
+//================================================================================
+
 void StdMeshers_NumberOfSegments::SetTableFunction(const vector<double>& table)
 {
   if (_distrType != DT_TabFunc)
@@ -492,6 +541,9 @@ ostream & StdMeshers_NumberOfSegments::SaveTo(ostream & save)
   case DT_ExprFunc:
     save << " " << _func;
     break;
+  case DT_BetaLaw:
+    save << " " << _beta;
+    break;
   case DT_Regular:
   default:
     break;
@@ -542,7 +594,7 @@ istream & StdMeshers_NumberOfSegments::LoadFrom(istream & load)
   // supposing that this hypothesis was written in the new format
   if (isOK)
   {
-    if (a < DT_Regular || a > DT_ExprFunc)
+    if (!IsValidDistrType(a))
       _distrType = DT_Regular;
     else
       _distrType = (DistrType) a;
@@ -607,6 +659,22 @@ istream & StdMeshers_NumberOfSegments::LoadFrom(istream & load)
       }
     }
     break;
+
+  case DT_BetaLaw:
+    {
+      isOK = static_cast<bool>(load >> b);
+      if (isOK)
+        _beta = b;
+      else
+      {
+        load.clear(ios::badbit | load.rdstate());
+        // this can mean, that the hypothesis is stored in old format
+        _distrType = DT_Regular;
+        _scaleFactor = scale_factor;
+      }
+    }
+    break;
+
   case DT_Regular:
   default:
     break;

src/StdMeshers/StdMeshers_NumberOfSegments.hxx

@@ -72,7 +72,8 @@ public:
     DT_Regular, //!< equidistant distribution
     DT_Scale,   //!< scale distribution
     DT_TabFunc, //!< distribution with density function presented by table
-    DT_ExprFunc //!< distribution with density function presented by expression
+    DT_ExprFunc, //!< distribution with density function presented by expression
+    DT_BetaLaw //!< distribution with Beta Law using parameter beta (expansion coefficient)
   };
 
   /*!
@@ -85,6 +86,11 @@ public:
    */
   DistrType GetDistrType() const;
 
+  /*!
+   * \brief Check if a given int falls into distribution type scope
+   */
+  bool IsValidDistrType(int distrType) const;
+
   /*!
    * \brief Set scale factor for scale distribution
    * \param scaleFactor - positive value different from 1
@@ -101,6 +107,21 @@ public:
    */
   double GetScaleFactor() const;
 
+  /*!
+   * \brief Set beta coefficient for Beta Law distribution
+   * \param beta - usually set between 1.01 (narrow mesh) and 1.00001 (very narrow mesh)
+   * 
+   * Throws SALOME_Exception if distribution type is not DT_BetaLaw
+   */
+  virtual void SetBeta(double scaleFactor);
+
+  /*!
+   * \brief Get beta coefficient for Beta Law distribution
+   * 
+   * Throws SALOME_Exception if distribution type is not DT_BetaLaw
+   */
+  double GetBeta() const;
+
   /*!
    * \brief Set table function for distribution DT_TabFunc
     * \param table - this vector contains the pairs (parameter, value)
@@ -184,6 +205,7 @@ protected:
   smIdType            _numberOfSegments; //!< an edge will be split on to this number of segments
   DistrType           _distrType;        //!< the type of distribution of density function
   double              _scaleFactor;      //!< the scale parameter for DT_Scale
+  double              _beta;             //!< beta coefficient for DT_BetaLaw
   std::vector<double> _table, _distr;    //!< the table for DT_TabFunc, a sequence of pairs of numbers
   std::string         _func;             //!< the expression of the function for DT_ExprFunc
   int                 _convMode;         //!< flag of conversion mode: 0=exponent, 1=cut negative

src/StdMeshers/StdMeshers_Regular_1D.cxx

@@ -209,6 +209,10 @@ bool StdMeshers_Regular_1D::CheckHypothesis( SMESH_Mesh&         aMesh,
       _svalue[ EXPR_FUNC_IND ] = hyp->GetExpressionFunction();
       _revEdgesIDs = hyp->GetReversedEdges();
       break;
+    case StdMeshers_NumberOfSegments::DT_BetaLaw:
+      _value[BETA_IND] = hyp->GetBeta();
+      _revEdgesIDs = hyp->GetReversedEdges();
+      break;
     case StdMeshers_NumberOfSegments::DT_Regular:
       break;
     default:
@@ -714,6 +718,74 @@ void StdMeshers_Regular_1D::redistributeNearVertices (SMESH_Mesh &          theM
   }
 }
 
+bool StdMeshers_Regular_1D::computeBetaLaw(
+  Adaptor3d_Curve& theC3d,
+  std::list<double>& theParams,
+  double f,
+  double theLength,
+  double beta,
+  int nbSegments,
+  bool theReverse
+  )
+{
+  // Implemented with formula, where h is the position of a point on the segment [0,1]:
+  // ratio=(1+beta)/(beta -1)
+  // zlog=log(ratio)
+  // puiss=exp(zlog*(1-h))
+  // rapp=(1-puiss)/(1+puiss)
+  // f(h) =1+beta*rapp
+  //
+  // Look at https://gitlab.onelab.info/gmsh/gmsh/-/commit/d581b381f2b8639fba40f2e771e2573d1a0f8424
+  // Especially gmsh/src/mesh/meshGEdge.cpp, 507: createPoints()
+
+  if (theReverse)
+  {
+    beta *= -1;
+  }
+
+  MESSAGE("Compute BetaLaw. beta: " << beta);
+
+  // Prepare a temp storage for position values
+  const int nbNewPoints = nbSegments - 1;
+  std::vector<double> t(nbNewPoints);
+
+  // Calculate position values with beta for each point
+  const double zlog = log((1. + beta) / (beta - 1.));
+  for(smIdType i = 0; i < nbNewPoints; i++)
+  {
+    const double eta = (double)(i + 1) / nbSegments;
+    const double power = exp(zlog * (1. - eta));
+    const double ratio = (1. - power) / (1. + power);
+    const double pos = 1.0 + beta * ratio;
+
+    // Check if we need to reverse distribution
+    if (beta > 0)
+    {
+      t[i] = pos;
+    }
+    else
+    {
+      t[nbNewPoints - i - 1] = 1.0 - pos;
+    }
+
+    // Commented to prevent bloated output with a casual debug
+    // MESSAGE("Calculated position " << i << ": " << pos);
+  }
+
+  // Make points for each calculated value
+  for(const auto i : t)
+  {
+    const double abscissa = i * theLength;
+    MESSAGE("abscissa: " << abscissa);
+
+    GCPnts_AbscissaPoint Discret(Precision::Confusion(), theC3d, abscissa, f);
+    if (Discret.IsDone())
+      theParams.push_back(Discret.Parameter());
+  }
+
+  return true;
+}
+
 //=============================================================================
 /*!
  *
@@ -906,6 +978,10 @@ bool StdMeshers_Regular_1D::computeInternalParameters(SMESH_Mesh &     theMesh,
                                     theParams);
         }
         break;
+
+      case StdMeshers_NumberOfSegments::DT_BetaLaw:
+        return computeBetaLaw(theC3d, theParams, f, theLength, _value[BETA_IND], nbSegments, theReverse);
+
       case StdMeshers_NumberOfSegments::DT_Regular:
         eltSize = theLength / double( nbSegments );
         break;

src/StdMeshers/StdMeshers_Regular_1D.hxx

@@ -106,6 +106,14 @@ protected:
                                 double              theLastU,
                                 std::list<double> & theParameters );
 
+  bool computeBetaLaw(Adaptor3d_Curve& theC3d,
+                      std::list<double>& theParams,
+                      double f,
+                      double theLength,
+                      double beta,
+                      int nbSegments,
+                      bool theReverse);
+
   /*!
    * \brief Return StdMeshers_SegmentLengthAroundVertex assigned to vertex
    */
@@ -117,6 +125,7 @@ protected:
 
   enum ValueIndex {
     SCALE_FACTOR_IND = 0,
+    BETA_IND = 0,
     BEG_LENGTH_IND   = 0,
     END_LENGTH_IND   = 1,
     DEFLECTION_IND   = 0,

src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.cxx

@@ -36,6 +36,7 @@
 #include <SMESHGUI_Utils.h>
 #include <SMESHGUI_HypothesesUtils.h>
 #include <SMESHGUI_SpinBox.h>
+#include <SMESHGUI_SpinBoxForbiddendRange.h>
 
 // IDL includes
 #include CORBA_SERVER_HEADER(SMESH_BasicHypothesis)
@@ -65,6 +66,7 @@ StdMeshersGUI_NbSegmentsCreator::StdMeshersGUI_NbSegmentsCreator()
   myNbSeg( 0 ),
   myDistr( 0 ),
   myScale( 0 ),
+  myBeta( 0 ),
   myTable( 0 ),
 #ifndef DISABLE_PLOT2DVIEWER
   myPreview( 0 ),
@@ -73,6 +75,7 @@ StdMeshersGUI_NbSegmentsCreator::StdMeshersGUI_NbSegmentsCreator()
   myConvBox( 0 ),
   myConv( 0 ),
   myLScale( 0 ),
+  myLBeta( 0 ),
   myLTable( 0 ),
   myLExpr( 0 ),
   myInfo( 0 ),
@@ -96,6 +99,7 @@ bool StdMeshersGUI_NbSegmentsCreator::checkParams( QString& msg ) const
   bool res = storeParamsToHypo( data_new );
   res = myNbSeg->isValid( msg, true ) && res;
   res = myScale->isValid( msg, true ) && res;
+  res = myBeta->isValid( msg, true ) && res;
   if ( !res )
     storeParamsToHypo( data_old );
   return res;
@@ -151,6 +155,7 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
   types.append( tr( "SMESH_DISTR_SCALE"   ) );
   types.append( tr( "SMESH_DISTR_TAB"     ) );
   types.append( tr( "SMESH_DISTR_EXPR"    ) );
+  types.append( tr( "SMESH_DISTR_BETALAW" ) );
   myDistr->addItems( types );
   myGroupLayout->addWidget( myDistr, row, 1 );
   row++;
@@ -238,6 +243,14 @@ QFrame* StdMeshersGUI_NbSegmentsCreator::buildFrame()
     lay->setStretchFactor( myReversedEdgesHelper, 1 );
   }
 
+  // 7) Beta Law distribution
+  myGroupLayout->addWidget(myLBeta = new QLabel(tr("SMESH_NB_SEGMENTS_BETA_PARAM"), GroupC1), row, 0);
+  myBeta = new SMESHGUI_SpinBoxForbiddendRange(GroupC1);
+  myBeta->RangeStepAndValidator(-1E+5, 1E+5, 0.00001, "parametric_precision");
+  myBeta->SetForbiddenRange(-1.0, 1.0);
+  myGroupLayout->addWidget(myBeta, row, 1);
+  row++;
+
   connect( myNbSeg, SIGNAL( valueChanged( const QString& ) ), this, SLOT( onValueChanged() ) );
   connect( myDistr, SIGNAL( activated( int ) ), this, SLOT( onValueChanged() ) );
   connect( myTable, SIGNAL( valueChanged( int, int ) ), this, SLOT( onValueChanged() ) );
@@ -271,6 +284,8 @@ void StdMeshersGUI_NbSegmentsCreator::retrieveParams() const
   myTable->setData( data.myTable );
   myExpr->setText( data.myExpr );
 
+  myBeta->setValue(data.myBeta);
+
   if ( dlg() )
     dlg()->setMinimumSize( dlg()->minimumSizeHint().width(), dlg()->minimumSizeHint().height() );
 }
@@ -288,7 +303,8 @@ QString StdMeshersGUI_NbSegmentsCreator::storeParams() const
     Regular, //!< equidistant distribution
     Scale,   //!< scale distribution
     TabFunc, //!< distribution with density function presented by table
-    ExprFunc //!< distribution with density function presented by expression
+    ExprFunc, //!< distribution with density function presented by expression
+    BetaLaw //!< distribution with density function presented by expression
   };
   bool hasConv = false;
   switch ( data.myDistrType ) {
@@ -314,6 +330,10 @@ QString StdMeshersGUI_NbSegmentsCreator::storeParams() const
     valStr += data.myExpr;
     hasConv = true;
     break;
+
+  case BetaLaw:
+    valStr += tr("SMESH_NB_SEGMENTS_BETA_PARAM") + " = " + QString::number(data.myBeta);
+    break;
   }
   if ( hasConv )
   {
@@ -366,6 +386,7 @@ bool StdMeshersGUI_NbSegmentsCreator::readParamsFromHypo( NbSegmentsHypothesisDa
 
   h_data.myExpr = distr==3 ? h->GetExpressionFunction() : "1";
   h_data.myConv = distr==2 || distr==3 ? h->ConversionMode() : 1; /*cut negative by default*/
+  h_data.myBeta = distr==4 ? h->GetBeta() : 1.01;
 
   return true;
 }
@@ -394,7 +415,7 @@ bool StdMeshersGUI_NbSegmentsCreator::storeParamsToHypo( const NbSegmentsHypothe
     if( distr==2 || distr==3 )
       h->SetConversionMode( h_data.myConv );
 
-    if( distr==1 || distr==2 || distr==3 ) {
+    if( distr==1 || distr==2 || distr==3 || distr == 4) {
       h->SetReversedEdges( myDirectionWidget->GetListOfIDs() );
       h->SetObjectEntry( myDirectionWidget->GetMainShapeEntry() );
     }
@@ -407,6 +428,12 @@ bool StdMeshersGUI_NbSegmentsCreator::storeParamsToHypo( const NbSegmentsHypothe
     //setting of function must follow after setConversionMode, because otherwise
     //the function will be checked with old conversion mode, so that it may occurs
     //unexpected errors for user
+
+    if(distr == 4)
+    {
+      h->SetDistrType(distr);
+      h->SetBeta(h_data.myBeta);
+    }
   }
   catch(const SALOME::SALOME_Exception& ex)
   {
@@ -425,6 +452,7 @@ bool StdMeshersGUI_NbSegmentsCreator::readParamsFromWidgets( NbSegmentsHypothesi
   h_data.myDistrType = myDistr->currentIndex();
   h_data.myConv      = myConv->checkedId();
   h_data.myScale     = myScale->value();
+  h_data.myBeta      = myBeta->value();
   myTable->data( h_data.myTable );
   h_data.myExpr      = myExpr->text();
   return true;
@@ -483,6 +511,11 @@ void StdMeshersGUI_NbSegmentsCreator::onValueChanged()
     myPreview->setConversion( StdMeshersGUI_DistrPreview::Conversion( myConv->checkedId() ) );
 #endif
 
+  // Beta Law UI elements
+  const bool isBetaLaw = distr == 4;
+  myBeta->setVisible(isBetaLaw);
+  myLBeta->setVisible(isBetaLaw);
+
   if ( (QtxComboBox*)sender() == myDistr && dlg() ) {
     QApplication::instance()->processEvents();
     myGroupLayout->invalidate();

src/StdMeshersGUI/StdMeshersGUI_NbSegmentsCreator.h

@@ -49,15 +49,16 @@ class QGridLayout;
 class QRadioButton;
 class StdMeshersGUI_SubShapeSelectorWdg;
 class StdMeshersGUI_PropagationHelperWdg;
+class SMESHGUI_SpinBoxForbiddendRange;
 
 typedef struct
 {
   int                 myNbSeg, myDistrType, myConv;
   double              myScale;
+  double              myBeta;
   SMESH::double_array myTable;
   QString             myName, myExpr;
   QString             myNbSegVarName, myScaleVarName;
-
 } NbSegmentsHypothesisData;
 
 class STDMESHERSGUI_EXPORT StdMeshersGUI_NbSegmentsCreator : public StdMeshersGUI_StdHypothesisCreator
@@ -87,6 +88,7 @@ private:
   SalomeApp_IntSpinBox*   myNbSeg;
   QtxComboBox*     myDistr;
   SMESHGUI_SpinBox*   myScale;
+  SMESHGUI_SpinBoxForbiddendRange*   myBeta;
   StdMeshersGUI_DistrTableFrame*  myTable;
 #ifndef DISABLE_PLOT2DVIEWER
   StdMeshersGUI_DistrPreview* myPreview;
@@ -94,7 +96,7 @@ private:
   QLineEdit       *myName, *myExpr;
   QGroupBox*       myConvBox;
   QButtonGroup*    myConv;
-  QLabel          *myLScale, *myLTable, *myLExpr, *myInfo;
+  QLabel          *myLScale, *myLTable, *myLExpr, *myInfo, *myLBeta;
   QGridLayout*     myGroupLayout;
   int              myTableRow, myPreviewRow;
   //QRadioButton*    myCutNeg;

src/StdMeshersGUI/StdMeshers_msg_en.ts

@@ -154,6 +154,10 @@ Consider creating another hypothesis instead of using this one for this mesh/sub
         <source>SMESH_DISTR_TAB</source>
         <translation>Distribution with table density</translation>
     </message>
+    <message>
+        <source>SMESH_DISTR_BETALAW</source>
+        <translation>Distribution with Beta Law</translation>
+    </message>
     <message>
         <source>SMESH_DISTR_TYPE</source>
         <translation>Type of distribution</translation>
@@ -310,6 +314,10 @@ Consider creating another hypothesis instead of using this one for this mesh/sub
         <source>SMESH_NB_SEGMENTS_SCALE_PARAM</source>
         <translation>Scale Factor</translation>
     </message>
+    <message>
+        <source>SMESH_NB_SEGMENTS_BETA_PARAM</source>
+        <translation>Expansion coefficient</translation>
+    </message>
     <message>
         <source>SMESH_NB_SEGMENTS_TITLE</source>
         <translation>Hypothesis Construction</translation>

src/StdMeshersGUI/StdMeshers_msg_fr.ts

@@ -154,6 +154,10 @@ Veuillez plutôt créer une autre hypothèse à la place de celle-ci pour ce mai
         <source>SMESH_DISTR_TAB</source>
         <translation>Distribution avec une table de densités</translation>
     </message>
+    <message>
+        <source>SMESH_DISTR_BETALAW</source>
+        <translation>Distribution avec la Loi Bêta</translation>
+    </message>
     <message>
         <source>SMESH_DISTR_TYPE</source>
         <translation>Type de distribution</translation>
@@ -306,6 +310,10 @@ Veuillez plutôt créer une autre hypothèse à la place de celle-ci pour ce mai
         <source>SMESH_NB_SEGMENTS_PARAM</source>
         <translation>Nombre de segments</translation>
     </message>
+    <message>
+        <source>SMESH_NB_SEGMENTS_BETA_PARAM</source>
+        <translation>Coefficient de dilatation</translation>
+    </message>
     <message>
         <source>SMESH_NB_SEGMENTS_SCALE_PARAM</source>
         <translation>Facteur d'échelle</translation>

src/StdMeshersGUI/StdMeshers_msg_ja.ts

@@ -142,6 +142,10 @@
       <source>SMESH_DISTR_TAB</source>
       <translation>密度のテーブル</translation>
     </message>
+    <message>
+      <source>SMESH_DISTR_BETALAW</source>
+      <translation>ベータ法による分布</translation>
+    </message>
     <message>
       <source>SMESH_DISTR_TYPE</source>
       <translation>分布の種類</translation>
@@ -294,6 +298,10 @@
       <source>SMESH_NB_SEGMENTS_PARAM</source>
       <translation>セグメントの数</translation>
     </message>
+    <message>
+      <source>SMESH_NB_SEGMENTS_BETA_PARAM</source>
+      <translation>膨張係数</translation>
+    </message>
     <message>
       <source>SMESH_NB_SEGMENTS_SCALE_PARAM</source>
       <translation>スケール ファクター</translation>

src/StdMeshers_I/StdMeshers_NumberOfSegments_i.cxx

@@ -234,6 +234,50 @@ CORBA::Double StdMeshers_NumberOfSegments_i::GetScaleFactor()
   return scale;
 }
 
+//=============================================================================
+/*!
+ *  StdMeshers_NumberOfSegments_i::SetBeta
+ *
+ *  Set beta coefficient for Beta Law distribution
+ */
+//=============================================================================
+
+void StdMeshers_NumberOfSegments_i::SetBeta(CORBA::Double beta)
+{
+  ASSERT(myBaseImpl);
+  try {
+    this->GetImpl()->SetBeta(beta);
+    // Update Python script
+    SMESH::TPythonDump() << _this() << ".SetBeta( " << SMESH::TVar(beta) << " )";
+  }
+  catch (SALOME_Exception& S_ex) {
+    THROW_SALOME_CORBA_EXCEPTION(S_ex.what(), SALOME::BAD_PARAM);
+  }
+}
+
+//=============================================================================
+/*!
+ *  StdMeshers_NumberOfSegments_i::GetBeta
+ *
+ *  Get beta coefficient for Beta Law distribution
+ */
+//=============================================================================
+
+CORBA::Double StdMeshers_NumberOfSegments_i::GetBeta()
+{
+  ASSERT(myBaseImpl);
+
+  double beta = 1.0;
+  try {
+    beta = this->GetImpl()->GetBeta();
+  }
+  catch (SALOME_Exception& S_ex) {
+    THROW_SALOME_CORBA_EXCEPTION(S_ex.what(), SALOME::BAD_PARAM);
+  }
+
+  return beta;
+}
+
 //=============================================================================
 /*!
  */

src/StdMeshers_I/StdMeshers_NumberOfSegments_i.hxx

@@ -72,6 +72,11 @@ public:
   // Get scalar factor
   CORBA::Double GetScaleFactor();
 
+  // Set beta coefficient for Beta Law distribution
+  void SetBeta(CORBA::Double beta);
+  // Get beta coefficient for Beta Law distribution
+  CORBA::Double GetBeta();
+
   // Set table function for distribution DT_TabFunc
   void SetTableFunction(const SMESH::double_array& table);
   // Get table function for distribution DT_TabFunc

test/SMESH_beta_law.py

@@ -0,0 +1,92 @@
+#!/usr/bin/env python
+
+import salome
+
+salome.salome_init()
+
+###
+### GEOM component
+###
+
+from salome.geom import geomBuilder
+
+geompy = geomBuilder.New()
+
+p1 = geompy.MakeVertex(0, 0, 0, theName="p1")
+p2 = geompy.MakeVertex(.1, 0, 0, theName="p2")
+p3 = geompy.MakeVertex(.1, .3, 0, theName="p3")
+p4 = geompy.MakeVertex(0, .3, 0, theName="p4")
+
+p5 = geompy.MakeVertex(-0.05, 0.1, 0, theName="p5")
+p6 = geompy.MakeVertex(-0.05, 0.05, 0, theName="p6")
+
+points = [p1, p2, p3, p4, p5, p6, p1]
+
+polyline = geompy.MakePolyline(points, theName="polyline")
+
+face = geompy.MakeFace(polyline, 1, theName="face")
+
+edges_by_name = {}
+for i in range(len(points)-1):
+  name = "edge_%i"%(i+1)
+  edge = geompy.GetEdge(face, points[i], points[i+1], theName=name)
+  edges_by_name[name] = edge
+
+###
+### SMESH component
+###
+
+import SMESH
+from salome.smesh import smeshBuilder
+
+smesh = smeshBuilder.New()
+
+Mesh_1 = smesh.Mesh(face,'Mesh_1')
+
+main_algo1D = Mesh_1.Segment()
+main_algo1D.NumberOfSegments(5)
+
+sub_algo1D = Mesh_1.Segment(edges_by_name["edge_1"])
+nb_seg_hyp = sub_algo1D.NumberOfSegments(29)
+nb_seg_hyp.SetDistrType( 4 )
+nb_seg_hyp.SetBeta( 1.001 )
+
+
+sub_algo1D = Mesh_1.Segment(edges_by_name["edge_2"])
+nb_seg_hyp = sub_algo1D.NumberOfSegments(19)
+
+sub_algo1D = Mesh_1.Segment(edges_by_name["edge_3"])
+nb_seg_hyp = sub_algo1D.NumberOfSegments(29)
+nb_seg_hyp.SetDistrType( 4 )
+nb_seg_hyp.SetBeta( -1.001 )
+
+sub_algo1D = Mesh_1.Segment(edges_by_name["edge_4"])
+nb_seg_hyp = sub_algo1D.NumberOfSegments(9)
+
+Quadrangle_2D = Mesh_1.Quadrangle()
+
+isDone = Mesh_1.Compute()
+Mesh_1.CheckCompute()
+
+gr_edges_by_name = {}
+for name, edge in edges_by_name.items():
+  gr_edge = Mesh_1.Group(edge)
+  gr_edges_by_name[name] = gr_edge
+
+assert Mesh_1.NbEdges() == 5+5+29*2+19+9
+assert Mesh_1.NbQuadrangles() == 551
+
+expected_mini = 2.9948449467664952e-05
+expected_maxi = 0.013044372341778604
+mini_1, maxi_1 = Mesh_1.GetMinMax(SMESH.FT_Length, meshPart=gr_edges_by_name["edge_1"])
+mini_3, maxi_3 = Mesh_1.GetMinMax(SMESH.FT_Length, meshPart=gr_edges_by_name["edge_3"])
+
+assert abs(expected_mini-mini_1)/mini_1 < 1e-12
+assert abs(expected_mini-mini_3)/mini_3 < 1e-12
+
+assert abs(expected_maxi-maxi_1)/maxi_1 < 1e-12
+assert abs(expected_maxi-maxi_3)/maxi_3 < 1e-12
+
+
+if salome.sg.hasDesktop():
+  salome.sg.updateObjBrowser()

test/SMESH_reg.py

@@ -70,7 +70,7 @@ smesh.UpdateStudy()
 # ---- Creating meshes
 
 box = salome.IDToObject(idbox)
-names = [ "MeshBoxReg", "MeshBoxScale", "MeshBoxTable", "MeshBoxExpr" ]
+names = [ "MeshBoxReg", "MeshBoxScale", "MeshBoxTable", "MeshBoxExpr", "MeshBoxBeta" ]
 
 
 print("-------------------------- Create ", names[0], " mesh")
@@ -82,6 +82,9 @@ smesh.SetName(hyp, "NumberOfSegmentsReg")
 algo = mesh.Triangle()
 algo.MaxElementArea(2500)
 
+mesh.Compute()
+mesh.CheckCompute()
+
 print("-------------------------- Create ", names[1], " mesh")
 mesh = smesh.Mesh(box, names[1])
 algo = mesh.Segment()
@@ -92,6 +95,9 @@ smesh.SetName(hyp, "NumberOfSegmentsScale")
 algo = mesh.Triangle()
 algo.MaxElementArea(2500)
 
+mesh.Compute()
+mesh.CheckCompute()
+
 print("-------------------------- Create ", names[2], " mesh")
 mesh = smesh.Mesh(box,names[2])
 algo = mesh.Segment()
@@ -103,6 +109,9 @@ smesh.SetName(hyp, "NumberOfSegmentsTable")
 algo = mesh.Triangle()
 algo.MaxElementArea(2500)
 
+mesh.Compute()
+mesh.CheckCompute()
+
 print("-------------------------- Create ", names[3], " mesh")
 mesh = smesh.Mesh(box, names[3])
 algo = mesh.Segment()
@@ -114,6 +123,25 @@ smesh.SetName(hyp, "NumberOfSegmentsExpr")
 algo = mesh.Triangle()
 algo.MaxElementArea(2500)
 
+mesh.Compute()
+mesh.CheckCompute()
+
+print("-------------------------- Create ", names[4], " mesh")
+mesh = smesh.Mesh(box, names[4])
+algo = mesh.Segment()
+hyp = algo.NumberOfSegments(7)
+hyp.SetDistrType(4)
+hyp.SetBeta(1.01)
+smesh.SetName(hyp, "NumberOfSegmentsBeta")
+
+quad_2d = mesh.Quadrangle()
+quad_2d.SetName("Quadrangle_2D")
+
+hexa_3d = mesh.Hexahedron()
+hexa_3d.SetName("Hexa_3D")
+
+mesh.Compute()
+mesh.CheckCompute()
+
 
 salome.sg.updateObjBrowser()
-

test/tests.set

@@ -42,6 +42,7 @@ SET(BAD_TESTS
   PAL_MESH_041_mesh.py
   PAL_MESH_043_3D.py
   SMESH_BelongToGeom.py
+  SMESH_beta_law.py
   SMESH_box2_tetra.py
   SMESH_box3_tetra.py
   SMESH_box_tetra.py