Update SMESH GUI documentation

doc/salome/gui/SMESH/input/extrusion_along_path.doc

@@ -4,12 +4,12 @@
 
 \n In principle, <b>Extrusion along a path</b> works in the same way
 as \b Extrusion, the main difference is that we define not a vector,
-but a path of extrusion which must be a 1D mesh or 1D sub-mesh. To
+but a path of extrusion which must be a 1D mesh or 1D sub-mesh. 
-get an idea of how this algorithm works, examine several examples,
+To get an idea of how this algorithm works, examine several examples,
 starting from the most simple case of extrusion along a straight edge.
-In following examples the meshes will be extruded along different
+In the examples the sample mesh will be extruded along different
 paths and with different parameters.
-This sample 2D mesh has two quadrangle faces and seven edges. Look
+This 2D mesh has two quadrangle faces and seven edges. Look
 at the picture, where white digits are the node numbers and green
 are the element numbers:
 
@@ -41,15 +41,17 @@ been selected as <b>Start node</b>.</center>
 \image html curvi_angles_after.png
 <center>The same, but using angles {45, 45, 45, 0, -45, -45, -45}</center>
 
-<br><center><h2>Extrusion of 2d face along a mesh builds on wire</h2></center>
+<br><center><h2>Extrusion of a 2D face along a mesh built on a wire</h2></center>
 
-In this example the path mesh has been built on a wire contains 3
+In this example the path mesh has been built on a wire containing 3
-edges. Node #1 is used as start node. Linear angle variation by 180
+edges. Node 1 is a start node. Linear angle variation by 180 degrees
-degree is applied.
+has also been applied.
 
 \image html extr_along_wire_before.png
+<center><em>Meshed wire</em></center>
 
 \image html extr_along_wire_after.png
+<center><em>The resulting extrusion</em></center>
 
 <br><center><h2>Extrusion of 2d elements along a closed path</h2></center>
 
@@ -100,7 +102,7 @@ about filters in the \ref selection_filter_library_page "Selection filter librar
 <li>define the Path along which the elements will be extruded,
 \n Path definition consists of several elements:
 <ul>
-<li><b>Mesh or submesh</b> - 1D mesh or 1D sub-mesh, along which proceeds the extrusion</li>
+<li><b>Mesh or submesh</b> - 1D mesh or sub-mesh, along which proceeds the extrusion</li>
 <li><b>Start node</b> - the start node. It is used to define the direction of extrusion </li>
 </ul>
 </li>

doc/salome/gui/SMESH/input/ghs3dprl_hypo.doc

@@ -5,7 +5,8 @@
 \n GHS3DPRL Parameters hypothesis works only with <b>Tetrahedron (Tepal with TetMesh-GHS3D)</b> algorithm.
 \n
 \n This algorithm is a commercial software, its use requires a licence (http://www.distene.com/fr/build/offer.html).
-\n For example, Tepal gives the possibility to generate a partitioned
+
+\n Tepal gives the possibility to generate a partitioned
 mesh with 200 million tetrahedrons on a computer with average memory size
 (2Go RAM) in about 50 hours on one CPU (Xeon, 2008). 
 This is a serious alternative to GHS3D, which requires a much less common
@@ -13,8 +14,8 @@ configuration with 64Go RAM to only try to make a partition of a mesh with
 200 million tetrahedrons, no result guaranteed.
 \n
 \note The Plugin doesn't load in the Memory the supposedly large resulting meshes. 
-The meshes are imported in the user-defined location as MED files via menu File-Import-MED Files.
+The meshes are saved in MED files and can be imported in the user-defined location via menu File-Import-MED Files.
-\n Pay attention, that Salome GUI Salome needs 2Go RAM. to load a MED
+\n Pay attention, that Salome GUI needs 2Go RAM. to load a MED
 file with 5 million tetrahedrons.
 
 \image html ghs3dprl_parameters_basic.png
@@ -24,19 +25,20 @@ file with 5 million tetrahedrons.
 <b>Name</b> - allows to define the name of the hypothesis (GHS3DPRL Parameters by default).
 </li>
 <li>
-<b>MED_Name</b> - allows to define the path and the default name of the 
+<b>MED_Name</b> - allows to define the path and the prefix of the 
-resulting MED files ("DOMAIN"). 
+resulting MED files ("DOMAIN" by default). 
 If the path is not defined, the environment variable $SALOME_TMP_DIR
-is used.
+is used. If $SALOME_TMP_DIR is not defined as well, the environment
+variable $TMP is used.
 </li>
 <li>
-<b>Nb_Part</b> - allows to define the number of generated MED files, 
+<b>Nb_Part</b> - allows to define the number of generated MED files.
 The initial skin (triangles) will be meshed (tetrahedrons) and partitioned 
 in Nb_Part by the elementary algorithm implemented in Tepal.<br>
 </li>
 <li>
 <b>Keep_Files</b> - if this box is checked, input files of Tepal 
-(GHS3DPRL.points and GHS3DPRL.faces) are deleted after use (...if the
+(GHS3DPRL.points and GHS3DPRL.faces) are not deleted after use (...if the
 background mode was not used).
 </li>
 <li>
@@ -55,8 +57,10 @@ GHS3DPRL Plugin launches a standalone binary executable tepal2med.<br>
 tepal2med launches tepal, waits for the end of computation, and
 converts the resulting output tepal files into MED files.<br>
 Some advanced optional parameters are accessible as arguments.<br>
+
 If keep_files option is checked, it is possible to re-launch tepal2med
 or tepal in the Terminal as a command with custom parameters.<br>
+
 <li>
 <b>Advanced tepal2med Parameters</b> - type "tepal2med --help" in the Terminal. <p>
 
@@ -89,30 +93,15 @@ example:
 </li>
 <li>
 <p>
-<b>Advanced tepal Parameters</b> - type "tepal" in a Terminal. <p>
+ <b>Advanced tepal Parameters</b> <p>
 
 \verbatim
-myname@myhost > tepal
-    =====================================
-    GHS3D-TEPAL 1.4.2 (Dec, 2006)               10-Dec-2008 AT 12:59:48
-    =====================================
-
- Distene SAS
-         Pole Teratec - BARD-1
-         Domaine du Grand Rue
-         91680 Bruyeres le Chatel
-         FRANCE
- Phone: +33(0)1-69-26-62-10   Fax: +33(0)1-69-26-90-33
- EMail: support@distene.com
-
-  COPYRIGHT (C)2006 DISTENE ALL RIGHTS RESERVED
-
 
 USAGE : tepal options
 
 With options :
      --filename name (-f name) :
-          Default name of the input case (MANDATORY)
+          Prefix of the input case (MANDATORY)
 
      --ndom n (-n n) :
           Number of subdomains to make (MANDATORY)
@@ -144,7 +133,7 @@ With options :
 
      --rebuild_retag  (-t ) :
           Tags vertices, faces (and tetra if selected) with their
-          subdomain number in the final merger of subdomains (keeps the lowest tag for shared elements)
+          subdomain number in the final merge of subdomains (keeps the lowest tag for shared elements)
 
      --rebuild_ensight_parts  (-e ) :
           Builds ensight geom file with parts
@@ -152,15 +141,6 @@ With options :
      --tetmesh_args str (-G str) :
           Arguments to pass to Tetmesh during cutting process
 
- ==============================================================================
-                   GHS3D-TEPAL SOFTWARE 1.4.2 (Dec, 2006)
-                                 END OF SESSION
-                COPYRIGHT (C)2006 DISTENE ALL RIGHTS RESERVED
- ==============================================================================
-      ( Distene SAS
-        Phone: +33(0)1-69-26-62-10   Fax: +33(0)1-69-26-90-33
-        EMail: support@distene.com )
-
 \endverbatim
 
 </li>
@@ -191,13 +171,13 @@ DESCRIPTION
                   the value specified in the command line has the priority on
                   the environment variable.
 
- -M MEMORY      : uses the automatic memory adjustment feature.
+ -M MEMORY      : provides the automatic memory adjustment feature.
-                  If MEMORY is equal to zero, the size of the work space is
+                  If MEMORY (in Megabytes) is equal to zero, the size of the work space is
                   calculated from the input. If MEMORY is not equal to
                   zero, the software starts with MEMORY amount of work space.
                   The software reallocates memory as necessary.
-                  The start value with MEMORY equal to 0 is 64 Megabytes,
+                  The start value of  MEMORY can range from 0 to 64 Megabytes,
-                  the maximum is depends on -m option and the actual memory available.
+                  the maximum depends on -m option and the actual memory available.
 
  -f prefix      : defines the generic prefix of the files.
 
@@ -214,7 +194,7 @@ DESCRIPTION
                   when the standard boundary recovery fails.
 
  -E count       : sets the extended output for error messages. If -E is used,
-                  the error messages will be printed, it is possinle
+                  the error messages will be printed, it is possible
                   to indicate the maximum number of printed messages between 1 and 100.
 
  -t             : generates an error file prefix.Log
@@ -255,7 +235,8 @@ DESCRIPTION
 </li>
 <h1>Saving user's preferred GHS3DPRL Advanced Parameters</h1><br>
 GHS3DPRL Plugin launches standalone binary executable tepal2med.<br>
-you may rename tepal2med as tepal2med.exe for example, and replace tepal2med by a shell script at your convenience to overriding parameters.<br>... or else $PATH modification... .<br>Idem for tepal.<br><br>
+You may rename tepal2med as tepal2med.exe for example, and replace
+tepal2med by a shell script at your convenience to overriding parameters.<br>... or else $PATH modification... .<br>Idem for tepal.<br><br>
 <li>
 <b>Advanced tepal2med Parameters</b> - overriding parameter deletegroups<p>