Check result of Compute() in test

test/PAL_MESH_041_mesh.py

@@ -100,8 +100,11 @@ smesh.SetName(hypArea200, "Max. Element Area")
 
 print("---------------------Compute the mesh")
 
-ret = mesh.Compute()
+isDone = mesh.Compute()
-print(ret)
+print(isDone)
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
 
 salome.sg.updateObjBrowser()
 

test/PAL_MESH_043_2D.py

@@ -76,8 +76,13 @@ hypNbSeg2 = algoReg2.NumberOfSegments(34)
 smesh.SetName(hypNbSeg2, "NumberOfSegments 2")
 
 # compute meshes
-mesh1.Compute()
+isDone = mesh1.Compute()
-mesh2.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
+isDone = mesh2.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 
 # ---- udate object browser

test/PAL_MESH_043_3D.py

@@ -86,8 +86,13 @@ smesh.SetName(hypNbSeg2, "NumberOfSegments_" + str(numberOfSegments2))
 
 
 # compute meshes
-mesh1.Compute()
+isDone = mesh1.Compute()
-mesh2.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
+isDone = mesh2.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # ---- update object browser
 salome.sg.updateObjBrowser()

test/SMESH_BelongToGeom.py

@@ -29,7 +29,8 @@ def CheckBelongToGeomFilterOld(theMeshGen, theMesh, theShape, theSubShape, theEl
         aName = str(theSubShape)
         geompy.addToStudyInFather(theShape,theSubShape,aName)
 
-    theMeshGen.Compute(theMesh,theShape)
+    if not theMeshGen.Compute(theMesh,theShape):
+        raise Exception("Error when computing Mesh")
 
     aFilterMgr = theMeshGen.CreateFilterManager()
     aFilter = aFilterMgr.CreateFilter()
@@ -48,7 +49,9 @@ def CheckBelongToGeomFilter(theMesh, theShape, theSubShape, theElemType):
         aName = str(theSubShape)
         geompy.addToStudyInFather(theShape,theSubShape,aName)
 
-    theMesh.Compute()
+    if not theMesh.Compute():
+        raise Exception("Error when computing Mesh")
+
     aFilter = smesh.GetFilter(theElemType, SMESH.FT_BelongToGeom, theSubShape)
     return aFilter.GetElementsId(theMesh.GetMesh())
     

test/SMESH_BuildCompound.py

@@ -73,7 +73,9 @@ algo1D_1=Mesh_inf.Segment()
 algo1D_1.NumberOfSegments(10)
 algo2D_1=Mesh_inf.Quadrangle()
 algo3D_1=Mesh_inf.Hexahedron()
-Mesh_inf.Compute()
+isDone = Mesh_inf.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # create a group on the top face
 Gsup1=Mesh_inf.Group(Fsup1, "Sup")
@@ -86,7 +88,9 @@ algo1D_2=Mesh_sup.Segment()
 algo1D_2.NumberOfSegments(5)
 algo2D_2=Mesh_sup.Quadrangle()
 algo3D_2=Mesh_sup.Hexahedron()
-Mesh_sup.Compute()
+isDone = Mesh_sup.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # create a group on the top face
 Gsup2=Mesh_sup.Group(Fsup2, "Sup")

test/SMESH_GroupFromGeom.py

@@ -28,7 +28,9 @@ from SMESH_test1 import *
 
 # Compute the mesh created in SMESH_test1
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Create geometry groups on plane:
 aGeomGroup1 = geompy.CreateGroup(face , geompy.ShapeType["FACE"])

test/SMESH_GroupFromGeom2.py

@@ -34,7 +34,9 @@ from SMESH_test1 import *
 
 # Compute the mesh created in SMESH_test1
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Create geometry groups on plane:
 aGeomGroup1 = geompy.CreateGroup(face , geompy.ShapeType["FACE"])
@@ -70,7 +72,10 @@ print("aGroupOnShell ids :", aGroupOnShell.GetListOfID())
 print(" ")
 
 print("Re-compute mesh, contents of aGroupOnShell changes again:")
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
 print("aGroupOnShell size =", aGroupOnShell.Size())
 print("aGroupOnShell ids :", aGroupOnShell.GetListOfID())
 

test/SMESH_GroupLyingOnGeom.py

@@ -39,7 +39,9 @@ def BuildGroupLyingOn(theMesh, theElemType, theName, theShape):
 #Example
 from SMESH_test1 import *
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # First way
 BuildGroupLyingOn(mesh.GetMesh(), SMESH.FACE, "Group of faces lying on edge #1", edge )

test/SMESH_Nut.py

@@ -147,7 +147,9 @@ smesh.SetName(hVolume, "MaxElementVolume_"+str(theMaxElementVolume))
 
 
 print("-------------------------- compute the mesh of the mechanic piece")
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 print("Information about the Nut:")
 print("Number of nodes       : ", mesh.NbNodes())

test/SMESH_ParallelCompute.py

@@ -102,13 +102,17 @@ def run_test(nbox=2, boxsize=100):
 
     start = time.monotonic()
     is_done = seq_mesh.Compute()
-    assert is_done
+    if not is_done:
+        raise Exception("Error when computing Mesh")
+
     stop = time.monotonic()
     time_seq = stop-start
 
     start = time.monotonic()
     is_done = par_mesh.Compute()
-    assert is_done
+    if not is_done:
+        raise Exception("Error when computing Mesh")
+
     stop = time.monotonic()
     time_par = stop-start
 

test/SMESH_Partition1_tetra.py

@@ -169,8 +169,9 @@ smesh.SetName(hypVolume, "MaxElementVolume_" + str(maxElementVolume))
 
 print("-------------------------- compute the mesh of alveole ")
 ret = mesh.Compute()
+if not ret:
+    raise Exception("Error when computing Mesh")
 
-if ret != 0:
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -181,7 +182,5 @@ if ret != 0:
 print("Number of triangles   : ", mesh.NbTriangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of tetrahedrons: ", mesh.NbTetras())
-else:
-    print("problem when computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_Sphere.py

@@ -116,6 +116,8 @@ algo = my_hexa.Segment()
 algo.NumberOfSegments(NbSeg)
 my_hexa.Quadrangle()
 my_hexa.Hexahedron()
-my_hexa.Compute()
+isDone = my_hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_box.py

@@ -68,6 +68,8 @@ alg3D.SetName("algo3D")
 
 # compute mesh
 
-box_mesh.Compute()
+isDone = box_mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 sg.updateObjBrowser()

test/SMESH_box2_tetra.py

@@ -124,7 +124,9 @@ smesh.SetName(hypVolume, "MaxElementVolume_" + str(maxElementVolume))
 print("-------------------------- compute shell")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -135,7 +137,5 @@ if ret != 0:
 print("Number of triangles   : ", mesh.NbTriangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of tetrahedrons: ", mesh.NbTetras())
-else:
-    print("probleme when computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_box3_tetra.py

@@ -134,7 +134,9 @@ smesh.SetName(hypVolume, "MaxElementVolume_" + str(maxElementVolume))
 print("-------------------------- compute shell")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -145,7 +147,5 @@ if ret != 0:
 print("Number of triangles   : ", mesh.NbTriangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of tetrahedrons: ", mesh.NbTetras())
-else:
-    print("probleme when computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_box_tetra.py

@@ -93,7 +93,9 @@ smesh.SetName(hypVolume, "MaxElementVolume_" + str(maxElementVolume))
 print("-------------------------- compute the mesh of the box")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -104,7 +106,5 @@ if ret != 0:
 print("Number of triangles   : ", mesh.NbTriangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of tetrahedrons: ", mesh.NbTetras())
-else:
-    print("probleme when computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_create_dual_mesh_adapt.py

@@ -73,6 +73,8 @@ top_1 = Mesh_1.GroupOnGeom(top,'top',SMESH.FACE)
 middle_1 = Mesh_1.GroupOnGeom(middle,'middle',SMESH.FACE)
 bottom_1 = Mesh_1.GroupOnGeom(bottom,'bottom',SMESH.FACE)
 isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 [ top_1, middle_1, bottom_1 ] = Mesh_1.GetGroups()
 

test/SMESH_create_dual_mesh_tpipe.py

@@ -83,6 +83,8 @@ algo3d = Mesh_1.Tetrahedron(algo=smeshBuilder.NETGEN_3D)
 algo3d.MaxElementVolume(0.0002)
 
 isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Create groups
 d_geom_groups = {}

test/SMESH_demo_hexa2_upd.py

@@ -181,9 +181,10 @@ salome.sg.updateObjBrowser()
 print("-------------------------- compute the mesh of the volume")
 
 ret = mesh.Compute()
-
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 ##log=mesh.GetLog(0) # no erase trace
 ##for linelog in log:
 ##    print linelog
@@ -194,7 +195,5 @@ if ret != 0:
 print("Number of triangles   : ", mesh.NbTriangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of tetrahedrons: ", mesh.NbTetras())
-else:
-    print("problem when Computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_fixation_hexa.py

@@ -85,7 +85,9 @@ hexa3D.SetName("Hexa_3D")
 print("-------------------------- compute compshell")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -96,7 +98,5 @@ if ret != 0:
 print("Number of quadrangles : ", mesh.NbQuadrangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of hexahedrons : ", mesh.NbHexas())
-else:
-    print("problem when Computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_fixation_netgen.py

@@ -64,7 +64,9 @@ netgen.SetFineness( smeshBuilder.Fine )
 print("-------------------------- compute mesh")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 print("Information about the MeshcompShel:")
 print("Number of nodes        : ", mesh.GetMesh().NbNodes())
 print("Number of edges        : ", mesh.GetMesh().NbEdges())
@@ -73,7 +75,4 @@ if ret != 0:
 print("Number of volumes      : ", mesh.GetMesh().NbVolumes())
 print("Number of tetrahedrons : ", mesh.GetMesh().NbTetras())
 
-else:
-    print("problem when computing the mesh")
-
 salome.sg.updateObjBrowser()

test/SMESH_fixation_tetra.py

@@ -96,7 +96,9 @@ smesh.SetName(hypVolume, "MaxElementVolume_" + str(maxElementVolume))
 print("-------------------------- compute compshell")
 ret = mesh.Compute(mesh)
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -108,7 +110,4 @@ if ret != 0:
 print("Number of volumes      : ", mesh.NbVolumes())
 print("Number of tetrahedrons : ", mesh.NbTetras())
 
-else:
-    print("problem when computing the mesh")
-
 salome.sg.updateObjBrowser()

test/SMESH_flight_skin.py

@@ -94,7 +94,9 @@ smesh.SetName(hypLengthFromEdge,"LengthFromEdge")
 print("-------------------------- compute the skin flight")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0) # no erase trace
 # for linelog in log:
 #     print(linelog)
@@ -104,7 +106,5 @@ if ret != 0:
 print("Number of faces      : ", mesh.NbFaces())
 print("Number of triangles  : ", mesh.NbTriangles())
 print("Number of volumes    : ", mesh.NbVolumes())
-else:
-    print("probleme when computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_freebord.py

@@ -59,8 +59,9 @@ algoMef = mesh.Triangle()
 hypArea = algoMef.MaxElementArea(20)
 
 
-mesh.Compute()
+isDone = mesh.Compute()
-
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Criterion : Free edges. Create group.
 

test/SMESH_hexaedre.py

@@ -87,7 +87,9 @@ for edges in edgeGroups: # loop on groups of logically parallel edges
 # ---- compute mesh
 print("-------------------------- compute mesh")
 ok = mesh.Compute()
-if ok:
+if not ok:
+    raise Exception("Error when computing Mesh")
+
 print("Information about the Mesh:")
 print("Number of nodes       : ", mesh.NbNodes())
 print("Number of edges       : ", mesh.NbEdges())
@@ -95,7 +97,5 @@ if ok:
 print("Number of quadrangles : ", mesh.NbQuadrangles())
 print("Number of volumes     : ", mesh.NbVolumes())
 print("Number of hexahedrons : ", mesh.NbHexas())
-else:
-    print("problem when Computing the mesh")
 
 salome.sg.updateObjBrowser()

test/SMESH_mechanic.py

@@ -177,7 +177,9 @@ smesh.SetName(algo.GetSubMesh(), "SubMeshFace4")
 
 print("-------------------------- compute the mesh of the mechanic piece")
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 print("Information about the Mesh_mechanic:")
 print("Number of nodes       : ", mesh.NbNodes())

test/SMESH_mechanic_editor.py

@@ -181,7 +181,9 @@ submesh4 = algo.GetSubMesh()
 
 print("-------------------------- compute the mesh of the mechanic piece")
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 print("Information about the Mesh_mechanic:")
 print("Number of nodes       : ", mesh.NbNodes())

test/SMESH_mechanic_netgen.py

@@ -122,7 +122,9 @@ netgen.SetQuadAllowed( 1 )
 print("-------------------------- compute mesh")
 ret = mesh.Compute()
 print(ret)
-if ret != 0:
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 print("Information about the MeshcompShel:")
 print("Number of nodes        : ", mesh.NbNodes())
 print("Number of edges        : ", mesh.NbEdges())
@@ -132,7 +134,4 @@ if ret != 0:
 print("Number of volumes      : ", mesh.NbVolumes())
 print("Number of tetrahedrons : ", mesh.NbTetras())
 
-else:
-    print("problem when computing the mesh")
-
 salome.sg.updateObjBrowser()

test/SMESH_mechanic_tetra.py

@@ -147,7 +147,9 @@ smesh.SetName(hypVolume, "maxElementVolume_" + str(maxElementVolume))
 
 
 print("-------------------------- compute the mesh of the mechanic piece")
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 print("Information about the Mesh_mechanic_tetra:")
 print("Number of nodes       : ", mesh.NbNodes())

test/SMESH_test.py

@@ -94,6 +94,9 @@ face = salome.IDToObject(idf)
 
 ret = mesh.Compute(face)
 print(ret)
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = [] #mesh.GetLog(0) # 0 - GetLog without ClearLog after, else if 1 - ClearLog after
 for a in log:
     print("-------")

test/SMESH_test1_AndDisplay.py

@@ -109,7 +109,9 @@ print(hypArea2.GetId())
 print(hypArea2.GetMaxElementArea())
 smesh.SetName(hypArea2, "MaxElementArea_500")
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 salome.sg.updateObjBrowser()
 

test/SMESH_test2.py

@@ -31,6 +31,9 @@ from SMESH_test1 import *
 print("-------------------------- compute box")
 ret = mesh.Compute()
 print(ret)
+if not ret:
+    raise Exception("Error when computing Mesh")
+
 log = mesh.GetLog(0); # no erase trace
 # for linelog in log:
 #     print(linelog)

test/SMESH_test4.py

@@ -66,7 +66,9 @@ algo4.MaxElementArea(100)
 submesh = algo4.GetSubMesh()
 smesh.SetName(submesh, "SubMeshFace")
 
-mesh.Compute()
+isDone = mesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 faces = submesh.GetElementsByType(SMESH.FACE)
 if len(faces) > 1:

test/basic_geom_smesh_without_session.py

@@ -44,7 +44,8 @@ smesh.SetEnablePublish( True ) # Set to False to avoid publish in study if not n
 Mesh_1 = smesh.Mesh(Box_1)
 NETGEN_1D_2D_3D = Mesh_1.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
 isDone = Mesh_1.Compute()
-
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 ## Set names of Mesh objects
 smesh.SetName(NETGEN_1D_2D_3D.GetAlgorithm(), 'NETGEN 1D-2D-3D')

test/basic_shaper_smesh_without_session.py

@@ -64,7 +64,8 @@ NETGEN_3D_Parameters_1.SetFuseEdges( 1 )
 NETGEN_3D_Parameters_1.SetQuadAllowed( 0 )
 NETGEN_3D_Parameters_1.SetCheckChartBoundary( 152 )
 isDone = Mesh_1.Compute()
-
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 ## Set names of Mesh objects
 smesh.SetName(NETGEN_1D_2D_3D.GetAlgorithm(), 'NETGEN 1D-2D-3D')

test/basic_smesh_output_with_mc_field.py

@@ -76,6 +76,8 @@ class SMESHExportOfFieldsInMemory(unittest.TestCase):
     Quadrangle_2D = Mesh_1.Quadrangle(algo=smeshBuilder.QUADRANGLE)
     Hexa_3D = Mesh_1.Hexahedron(algo=smeshBuilder.Hexa)
     isDone = Mesh_1.Compute()
+    if not isDone:
+      raise Exception("Error when computing Mesh")
     smesh.SetName(Mesh_1, 'Mesh_1')
 
     #### Mesh_1.ExportMED( r'Mesh_with_one_field_on_cells.med', 0, 41, 1, Mesh_1.GetMesh(), 1, [ Field_1_1 ], '',-1 )
@@ -165,6 +167,8 @@ class SMESHExportOfFieldsInMemory(unittest.TestCase):
     Quadrangle_2D = Mesh_1.Quadrangle(algo=smeshBuilder.QUADRANGLE)
     Hexa_3D = Mesh_1.Hexahedron(algo=smeshBuilder.Hexa)
     isDone = Mesh_1.Compute()
+    if not isDone:
+      raise Exception("Error when computing Mesh")
     smesh.SetName(Mesh_1, 'Mesh_1')
 
     # 23th of june 2021 : Bug both in ExportMED and in ExportMEDCoupling

test/doublenodes_polyhedra.py

@@ -174,6 +174,8 @@ def createMesh(algo):
   algo_1d_sub.Propagation()
 
   isDone = Mesh_1.Compute()
+  if not isDone:
+    raise Exception("Error when computing Mesh")
 
   nb_nodes = Mesh_1.NbNodes()
   # Create 2 cracks by two calls of DoubleNodeElemGroups

test/ex01_cube2build.py

@@ -318,7 +318,9 @@ algo.Propagation()
 # Compute the mesh
 # ----------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex02_cube2primitive.py

@@ -120,7 +120,9 @@ hexa.Hexahedron()
 # Compute the mesh
 # ----------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex03_cube2partition.py

@@ -107,7 +107,9 @@ hexa.Hexahedron()
 # Compute the mesh
 # ----------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex04_cube5tetraHexa.py

@@ -112,7 +112,9 @@ localMesh(box_tetra2, 0)
 # Mesh calculus
 # -------------
 
-mixed.Compute()
+isDone = mixed.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex05_hole1build.py

@@ -147,7 +147,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex06_hole1boolean.py

@@ -164,7 +164,9 @@ algo4.Propagation()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex07_hole1partition.py

@@ -104,7 +104,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex08_hole2build.py

@@ -137,7 +137,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex09_grid4build.py

@@ -140,7 +140,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex10_grid4geometry.py

@@ -102,7 +102,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex11_grid3partition.py

@@ -123,7 +123,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex12_grid17partition.py

@@ -143,7 +143,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 t3= time.time()
 

test/ex13_hole1partial.py

@@ -256,7 +256,9 @@ local(cyl_x+d, cyl_y+d, box_dz, 10)
 # Compute the mesh
 # ----------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex14_cyl1holed.py

@@ -141,7 +141,9 @@ while m_i<m_n:
 # Calculer le maillage
 # --------------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex15_cyl2geometry.py

@@ -200,7 +200,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex16_cyl2complementary.py

@@ -144,7 +144,9 @@ local(gx+g_dx, gy-g_dy, gz     , 21)
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex17_dome1.py

@@ -103,7 +103,10 @@ hexa.Hexahedron()
 # Calcul du maillage
 # ------------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
 # Update object browser
 # ---------------------
 

test/ex18_dome2.py

@@ -140,7 +140,9 @@ hexa.Hexahedron()
 # Calcul du maillage
 # ------------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Update object browser
 # ---------------------

test/ex19_sphereINcube.py

@@ -180,7 +180,9 @@ hexa.Hexahedron()
 # Mesh calculus
 # -------------
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Le groupe de mailles
 # --------------------

test/ex21_lamp.py

@@ -126,7 +126,9 @@ algo3d.MaxElementVolume(100)
 # Compute the mesh
 # ----------------
 
-tetra.Compute()
+isDone = tetra.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # Create a groupe of faces
 # ------------------------

test/ex24_cylinder.py

@@ -125,7 +125,9 @@ discretize(        +radius,       0, height/2,  20)
 hexa.Quadrangle()
 hexa.Hexahedron()
 
-hexa.Compute()
+isDone = hexa.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 hexa.Group(group_a)
 hexa.Group(group_b)

test/ex29_refine.py

@@ -170,7 +170,9 @@ refine(MyMesh, P2, P3, 12, 14, "Haut"  )
 algo2D = MyMesh.Triangle()
 algo2D.MaxElementArea(0.07)
 
-MyMesh.Compute()
+isDone = MyMesh.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 MyMesh.ExportMED(path+"110_triangles.med", 0)
 

test/ex30_groupsOp.py

@@ -42,6 +42,8 @@ Nb_Segments_1 = Regular_1D.NumberOfSegments(10)
 Nb_Segments_1.SetDistrType( 0 )
 Quadrangle_2D = Mesh_1.Quadrangle()
 isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # groups creation
 

test/ex30_tepal.py

@@ -81,6 +81,8 @@ algo3d.SetKeepFiles(False)
 # --------------
 
 status = m.Compute()
+if not status:
+    raise Exception("Error when computing Mesh")
 
 # Test if ok
 # ----------

test/ex31_dimGroup.py

@@ -42,6 +42,8 @@ Nb_Segments_1.SetDistrType( 0 )
 Quadrangle_2D = Mesh_1.Quadrangle()
 Hexa_3D = Mesh_1.Hexahedron()
 isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 ### CreateDimGroup()
 

test/ex_MakePolyLine.py

@@ -18,7 +18,9 @@ smesh = smeshBuilder.New()
 Mesh_1 = smesh.Mesh( Box_1 )
 Mesh_1.Segment().NumberOfSegments(15)
 Mesh_1.Triangle()
-Mesh_1.Compute()
+isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
 
 # define arguments for MakePolyLine
 

test/extrusion_penta_biquad.py

@@ -33,6 +33,9 @@ Regular_1D = Mesh_1.Segment()
 Number_of_Segments_1 = Regular_1D.NumberOfSegments(6)
 Quadrangle_2D = Mesh_1.Quadrangle(algo=smeshBuilder.QUADRANGLE)
 isDone = Mesh_1.Compute()
+if not isDone:
+    raise Exception("Error when computing Mesh")
+
 aMaxElementLength2D0x5d7fdf0 = aFilterManager.CreateMaxElementLength2D()
 isDone = Mesh_1.QuadToTriObject( Mesh_1,  )
 Mesh_1.ExtrusionSweepObjects( [ Mesh_1 ], [ Mesh_1 ], [ Mesh_1 ], [ 0, 0, 50 ], 3, 1 )

test/netgen_runner.py

@@ -70,8 +70,10 @@ def test_netgen3d():
     mesh_2d = smesh.Mesh(groupe_1, 'Maillage_1')
     mesh_2d.AddHypothesis(groupe_1, netgen_2d_parameters_1)
     mesh_2d.Triangle(algo=smeshBuilder.NETGEN_1D2D)
-    is_done = mesh_2d.Compute()
+    isDone = mesh_2d.Compute()
-    assert is_done
+    if not isDone:
+        raise Exception("Error when computing Mesh")
+
     smesh.SetName(mesh_2d, 'Maillage_1')
 
     with tempfile.TemporaryDirectory() as tmp_dir:

test/test_polyhedron_per_solid.py

@@ -105,7 +105,6 @@ PolygonPerFace_2D = Mesh_1.Polygon()
 PolyhedronPerSolid_3D = Mesh_1.Polyhedron()
 
 ok = Mesh_1.Compute()
-
 if not ok:
   raise Exception("Error when computing Mesh")