cosmétique

src/Tools/blocFissure/gmu/mailleFacesPeau.py

@@ -18,6 +18,8 @@
 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 #
 
+"""maillage faces de peau"""
+
 import logging
 
 from .geomsmesh import geompy
@@ -34,9 +36,7 @@ def mailleFacesPeau(partitionsPeauFissFond, idFillingFromBout, facesDefaut,
                     facesPeaux, edCircPeau, ptCircPeau, gpedgeBord, gpedgeVifs, edFissPeau,
                     bordsLibres, grpEdgesPeauFissureExterne, grpAretesVives,
                     edgesCircPipeGroup, dmoyen, rayonPipe, nbsegRad):
-  """
+  """maillage faces de peau"""
-  maillage faces de peau
-  """
   logging.info('start')
   nbFacesFilling = len(partitionsPeauFissFond)
   boutFromIfil = [None for i in range(nbFacesFilling)]

src/Tools/blocFissure/gmu/regroupeSainEtDefaut.py

@@ -18,17 +18,17 @@
 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 #
 
+"""Maillage sain sans la zone de defaut"""
+
 import logging
+
+from .geomsmesh import geompy
 from .geomsmesh import smesh
 import SMESH
-from .geomsmesh import geompy
-
-# -----------------------------------------------------------------------------
-# --- maillage complet et fissure
 
 def RegroupeSainEtDefaut(maillageSain, blocComplet, extrusionFaceFissure, faceGeomFissure, nomVolume, normal = None):
-  """
+  """Maillage sain sans la zone de defaut
-  Maillage sain sans la zone de defaut
+
   TODO: a completer
   """
   logging.info('Concatenation')
@@ -36,22 +36,26 @@ def RegroupeSainEtDefaut(maillageSain, blocComplet, extrusionFaceFissure, faceGe
   maillageComplet = smesh.Concatenate([maillageSain.GetMesh(), blocComplet.GetMesh()], 1, 1, 1e-05,False)
 
   groups = maillageComplet.GetGroups()
-  grps = [ grp for grp in groups if grp.GetName() == 'FACE1']
+  for grp in groups:
-  faceFissure = grps[0]
+    grp_nom = grp.GetName()
-  grps = [ grp for grp in groups if grp.GetName() == 'nfondfis']
+    if ( grp_nom == "FACE1" ):
-  noeudsFondFissure = grps[0]
+      faceFissure = grp
-  grps = [ grp for grp in groups if grp.GetName() == 'fisInPi']
+    elif ( grp_nom == "nfondfis" ):
-  fisInPi = grps[0]
+      noeudsFondFissure = grp
-  grps = [ grp for grp in groups if grp.GetName() == 'fisOutPi']
+    elif ( grp_nom == "fisInPi" ):
-  fisOutPi = grps[0]
+      fisInPi = grp
+    elif ( grp_nom == "fisOutPi" ):
+      fisOutPi = grp
 
   # --- TODO: fiabiliser l'orientation dans le cas general
   if normal is None:
     normal  = smesh.MakeDirStruct( 0, 0, 1 )
+  logging.debug('après normal = {}'.format(normal))
   maillageComplet.Reorient2D( fisInPi,  normal, [0,0,0])
+  logging.debug('après Reorient2D In')
   maillageComplet.Reorient2D( fisOutPi, normal, [0,0,0])
-    
+
-  shapes = []
+  shapes = list()
   if extrusionFaceFissure is not None:
     subIds = geompy.SubShapeAllIDs(extrusionFaceFissure, geompy.ShapeType["SOLID"])
     if len(subIds) > 1:
@@ -64,40 +68,47 @@ def RegroupeSainEtDefaut(maillageSain, blocComplet, extrusionFaceFissure, faceGe
 #      shapes = geompy.ExtractShapes(faceGeomFissure, geompy.ShapeType["FACE"], False)
 #    else:
 #      shapes = [faceGeomFissure]
-    
+
-  grpEdges = []
+  grpEdges = list()
-  grpFaces = []
+  grpFaces = list()
-  grpVolumes = []
+  grpVolumes = list()
   if len(shapes) == 0:
     shapes = [None] # calcul uniquement avec les normales des faces mailles de la fissure
   for i, aShape in enumerate(shapes):
-    logging.info('Detection elements affectes par le dedoublement de la face %d'%i)
+    texte = "Detection elements affectes par le dedoublement de la face n° {}".format(i)
+    logging.debug(texte)
     affectedGroups = maillageComplet.AffectedElemGroupsInRegion([faceFissure], [noeudsFondFissure], aShape)
-    grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedEdges']
+    for grp in affectedGroups:
-    affectedEdges = grps[0]
+      grp_nom = grp.GetName()
+      if ( grp_nom == "affectedEdges" ):
+        affectedEdges = grp
+      elif ( grp_nom == "affectedFaces" ):
+        affectedFaces = grp
+      elif ( grp_nom == "affectedVolumes" ):
+        affectedVolumes = grp
+    #grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedEdges']
+    #affectedEdges = grps[0]
     affectedEdges.SetName('affEd%d'%i)
     grpEdges.append(affectedEdges)
-    grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedFaces']
+    #grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedFaces']
-    affectedFaces = grps[0]
+    #affectedFaces = grps[0]
     affectedFaces.SetName('affFa%d'%i)
     grpFaces.append(affectedFaces)
-    grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedVolumes']
+    #grps = [ grp for grp in affectedGroups if grp.GetName() == 'affectedVolumes']
-    affectedVolumes = grps[0]
+    #affectedVolumes = grps[0]
     affectedVolumes.SetName('affVo%d'%i)
     grpVolumes.append(affectedVolumes)
-  logging.info("union des groupes d'edges") 
   affectedEdges = maillageComplet.UnionListOfGroups(grpEdges, 'affEdges')
-  logging.info("union des groupes de faces") 
   affectedFaces = maillageComplet.UnionListOfGroups(grpFaces, 'affFaces')
-  logging.info("union des groupes de volumes") 
   affectedVolumes = maillageComplet.UnionListOfGroups(grpVolumes, 'affVols')
   for grp in affectedGroups:
-    logging.debug("nom groupe %s",grp.GetName())
+    texte = "Traitement du groupe '{}'".format(grp.GetName())
-  [ FACE2, FACE2_nodes ] = maillageComplet.DoubleNodeElemGroups([faceFissure], [noeudsFondFissure], affectedGroups, True, True)
+    logging.debug(texte)
+  [ FACE2, _ ] = maillageComplet.DoubleNodeElemGroups([faceFissure], [noeudsFondFissure], affectedGroups, True, True)
   FACE2.SetName( 'FACE2' )
 
+  # Groupe de toutes les mailles volumiques
   GroupVol = maillageComplet.CreateEmptyGroup( SMESH.VOLUME, nomVolume )
-  nbAdd = GroupVol.AddFrom( maillageComplet.GetMesh() )
+  _ = GroupVol.AddFrom( maillageComplet.GetMesh() )
 
   return maillageComplet
-

src/Tools/blocFissure/materielCasTests/genereMateriel.py

@@ -19,15 +19,15 @@
 #
 
 from blocFissure.materielCasTests import cubeAngle
-from blocFissure.materielCasTests import cubeFin
 from blocFissure.materielCasTests import decoupeCylindre
-from blocFissure.materielCasTests import disque_perce
-from blocFissure.materielCasTests import ellipse
-from blocFissure.materielCasTests import ellipse_disque
-from blocFissure.materielCasTests import ellipse_probleme
 from blocFissure.materielCasTests import eprouvetteCourbe
 from blocFissure.materielCasTests import eprouvetteDroite
 from blocFissure.materielCasTests import fissureGauche
 from blocFissure.materielCasTests import fissureGauche2
-from blocFissure.materielCasTests import tube
+from blocFissure.materielCasTests import ellipse
+from blocFissure.materielCasTests import ellipse_probleme
+from blocFissure.materielCasTests import disque_perce
+from blocFissure.materielCasTests import ellipse_disque
 from blocFissure.materielCasTests import vis
+from blocFissure.materielCasTests import cubeFin
+#from blocFissure.materielCasTests import tube

src/Tools/blocFissure/materielCasTests/tube.py

@@ -19,18 +19,20 @@
 #
 
 """Cas-test de blocFissure sur un tube"""
-__revision__ = "V02.04"
+__revision__ = "V02.05"
 
 import logging
-
-import sys
-import salome
-
-salome.salome_init()
-
 import os
+
 from blocFissure import gmu
 
+import salome
+from SketchAPI import *
+from salome.shaper import model
+import SHAPERSTUDY
+import SMESH
+from salome.smesh import smeshBuilder
+
 #=============== Options ====================
 # 1. NOM_OBJET = nom de l'objet
 NOM_OBJET = "Tube"
@@ -51,14 +53,12 @@ NB_S_H = 60
 NB_S_P = 30
 #============================================
 
+salome.salome_init()
+
 ###
 ### SHAPER component
 ###
 
-from SketchAPI import *
-
-from salome.shaper import model
-
 model.begin()
 partSet = model.moduleDocument()
 
@@ -152,7 +152,8 @@ SketchPoint_5 = SketchProjection_5.createdFeature()
 
 ### Create SketchEllipticArc
 SketchEllipticArc_1 = Sketch_2.addEllipticArc(-20, 8.956370781951521e-27, -10.21629725685072, 9.783702743149284, 10.10993798723031, 4.722461741243296, 9.440921421952831, 9.565935245237778, False)
-[SketchPoint_6, SketchPoint_7, SketchPoint_8, SketchPoint_9, SketchPoint_10, SketchPoint_11, SketchPoint_12, SketchLine_7, SketchLine_8] = SketchEllipticArc_1.construction(center = "aux", firstFocus = "aux", secondFocus = "aux", majorAxisStart = "aux", majorAxisEnd = "aux", minorAxisStart = "aux", minorAxisEnd = "aux", majorAxis = "aux", minorAxis = "aux")
+[SketchPoint_6, SketchPoint_7, SketchPoint_8, SketchPoint_9, SketchPoint_10, SketchPoint_11, SketchPoint_12, SketchLine_7, SketchLine_8] = \
+  SketchEllipticArc_1.construction(center = "aux", firstFocus = "aux", secondFocus = "aux", majorAxisStart = "aux", majorAxisEnd = "aux", minorAxisStart = "aux", minorAxisEnd = "aux", majorAxis = "aux", minorAxis = "aux")
 Sketch_2.setCoincident(SketchEllipticArc_1.startPoint(), SketchLine_6.endPoint())
 Sketch_2.setCoincident(SketchAPI_Point(SketchPoint_6).coordinates(), SketchLine_5.result())
 Sketch_2.setTangent(SketchEllipticArc_1.result(), SketchArc_1.results()[1])
@@ -228,7 +229,7 @@ model.end()
 ###
 
 model.publishToShaperStudy()
-import SHAPERSTUDY
+
 l_aux = SHAPERSTUDY.shape(model.featureStringId(Revolution_1))
 objet = l_aux[0]
 l_groups = l_aux[1:]
@@ -237,11 +238,7 @@ l_groups = l_aux[1:]
 ### SMESH component
 ###
 
-import  SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-
 smesh = smeshBuilder.New()
-from salome.StdMeshers import StdMeshersBuilder
 Maillage_tube = smesh.Mesh(objet)
 smesh.SetName(Maillage_tube, NOM_OBJET)