diff --git a/doc/salome/gui/SMESH/input/modifying_meshes.doc b/doc/salome/gui/SMESH/input/modifying_meshes.doc
old mode 100644
new mode 100755
index d32e56a48..3a8f59d7e
--- a/doc/salome/gui/SMESH/input/modifying_meshes.doc
+++ b/doc/salome/gui/SMESH/input/modifying_meshes.doc
@@ -1,60 +1,59 @@
-/*!
-
-\page modifying_meshes_page Modifying meshes
-
-Salome provides an extremely vast specter of mesh modification and
-transformation operations, giving the possibility to:
-
-<ul>
-<li>\subpage adding_nodes_and_elements_page "Add" mesh elements from
-nodes to polyhedrons at an arbitrary place in the mesh.</li>
-<li>\subpage adding_quadratic_elements_page "Add quadratic" mesh
-elements (used in quadratic meshes) from quadratic nodes to quadratic polyhedrons at an arbitrary place in the mesh.</li>
-<li>\subpage removing_nodes_and_elements_page "Remove" any existing
-mesh elements.</li>
-<li>\subpage renumbering_nodes_and_elements_page "Renumber" nodes and
-elements of the mesh.</li>
-<li>\subpage translation_page "Translate" in the indicated direction the mesh or some of
-its elements.</li>
-<li>\subpage rotation_page "Rotate" by the indicated axis and angle
-the mesh or some of its elements.</li>
-<li>\subpage scale_page "Scale" the mesh or some of its
-elements.</li>
-<li>\subpage symmetry_page "Mirror" the mesh
-through a point or a vector of symmetry.</li>
-<li>\subpage double_nodes_page "Duplicate nodes or/and
-  Elements". Duplication of nodes can be useful to emulate a crack in the model.</li>
-<li>Unite meshes by \subpage sewing_meshes_page "sewing" free borders,
-conform free borders, border to side or side elements.</li>
-<li>\subpage merging_nodes_page "Merge Nodes", considered coincident
-within the indicated tolerance.</li>
-<li>\subpage merging_elements_page "Merge Elements", considered coincident
-within the indicated tolerance.</li>
-<li>\subpage mesh_through_point_page "Move Nodes" to an arbitrary location
-with consequent transformation of all adjacent elements and edges.</li>
-<li>\subpage diagonal_inversion_of_elements_page "Invert an edge" between neighboring triangles.</li>
-<li>\subpage uniting_two_triangles_page "Unite two triangles".</li>
-<li>\subpage uniting_set_of_triangles_page "Unite several adjacent triangles".</li>
-<li>\subpage changing_orientation_of_elements_page "Change orientation"
- of the selected elements.</li>
-<li>\subpage reorient_faces_page "Reorient faces by vector".</li>
-<li>\subpage cutting_quadrangles_page "Cut a quadrangle" into two triangles.</li>
-<li>\subpage split_to_tetra_page "Split" volumic elements into tetrahedra or prisms.</li>
-<li>\subpage smoothing_page "Smooth" elements, reducung distortions in
-them by adjusting the locations of element corners.</li>
-<li>Create an \subpage extrusion_page "extrusion" along a vector.</li>
-<li>Create an \subpage extrusion_along_path_page "extrusion along a path".</li>
-<li>Create an edge or a surface by \subpage revolution_page "revolution"
-of the selected node or edge.</li>
-<li>Apply \subpage pattern_mapping_page "pattern mapping".</li>
-<li>\subpage convert_to_from_quadratic_mesh_page "Convert regular mesh to quadratic", 
-or vice versa.</li>
-<li>\subpage make_2dmesh_from_3d_page "Generate boundary elements".</li>
-<li>\subpage generate_flat_elements_page "Generate flat elements on group boundaries or on faces".</li>
-<li>\subpage cut_mesh_by_plane_page "Cut a tetrahedron mesh by a plane".</li>
-</ul>
-
-\note It is possible to use the variables defined in the SALOME \b NoteBook
- to specify the numerical parameters used for modification of any object.
-
-*/
+/*!
+
+\page modifying_meshes_page Modifying meshes
+
+Salome provides an extremely vast specter of mesh modification and
+transformation operations, giving the possibility to:
+
+<ul>
+<li>\subpage adding_nodes_and_elements_page "Add" mesh elements from
+nodes to polyhedrons at an arbitrary place in the mesh.</li>
+<li>\subpage adding_quadratic_elements_page "Add quadratic" mesh
+elements (used in quadratic meshes) from quadratic nodes to quadratic polyhedrons at an arbitrary place in the mesh.</li>
+<li>\subpage removing_nodes_and_elements_page "Remove" any existing
+mesh elements.</li>
+<li>\subpage renumbering_nodes_and_elements_page "Renumber" nodes and
+elements of the mesh.</li>
+<li>\subpage translation_page "Translate" in the indicated direction the mesh or some of
+its elements.</li>
+<li>\subpage rotation_page "Rotate" by the indicated axis and angle
+the mesh or some of its elements.</li>
+<li>\subpage scale_page "Scale" the mesh or some of its
+elements.</li>
+<li>\subpage symmetry_page "Mirror" the mesh
+through a point or a vector of symmetry.</li>
+<li>\subpage double_nodes_page "Duplicate nodes or/and Elements". Duplication of nodes can be useful to emulate a crack in the model.</li>
+<li>Unite meshes by \subpage sewing_meshes_page "sewing" free borders,
+conform free borders, border to side or side elements.</li>
+<li>\subpage merging_nodes_page "Merge Nodes", considered coincident
+within the indicated tolerance.</li>
+<li>\subpage merging_elements_page "Merge Elements", considered coincident
+within the indicated tolerance.</li>
+<li>\subpage mesh_through_point_page "Move Nodes" to an arbitrary location
+with consequent transformation of all adjacent elements and edges.</li>
+<li>\subpage diagonal_inversion_of_elements_page "Invert an edge" between neighboring triangles.</li>
+<li>\subpage uniting_two_triangles_page "Unite two triangles".</li>
+<li>\subpage uniting_set_of_triangles_page "Unite several adjacent triangles".</li>
+<li>\subpage changing_orientation_of_elements_page "Change orientation"
+ of the selected elements.</li>
+<li>\subpage reorient_faces_page "Reorient faces by vector".</li>
+<li>\subpage cutting_quadrangles_page "Cut a quadrangle" into two triangles.</li>
+<li>\subpage split_to_tetra_page "Split" volumic elements into tetrahedra or prisms.</li>
+<li>\subpage smoothing_page "Smooth" elements, reducung distortions in
+them by adjusting the locations of element corners.</li>
+<li>Create an \subpage extrusion_page "extrusion" along a vector.</li>
+<li>Create an \subpage extrusion_along_path_page "extrusion along a path".</li>
+<li>Create an edge or a surface by \subpage revolution_page "revolution"
+of the selected node or edge.</li>
+<li>Apply \subpage pattern_mapping_page "pattern mapping".</li>
+<li>\subpage convert_to_from_quadratic_mesh_page "Convert regular mesh to quadratic", 
+or vice versa.</li>
+<li>\subpage make_2dmesh_from_3d_page "Generate boundary elements".</li>
+<li>\subpage generate_flat_elements_page "Generate flat elements on group boundaries or on faces".</li>
+<li>\subpage cut_mesh_by_plane_page "Cut a tetrahedron mesh by a plane".</li>
+</ul>
+
+\note It is possible to use the variables defined in the SALOME \b NoteBook
+ to specify the numerical parameters used for modification of any object.
+
+*/