53416: SALOME crashes when selecting a sub-menu of Control menu item

doc/salome/gui/SMESH/input/about_meshes.doc

@@ -35,7 +35,7 @@ Mesh module provides several ways to create the mesh:
   </li>
   <li>Bottom-up way, using \ref modifying_meshes_page "mesh modification"
     operations, especially \ref extrusion_page "extrusion" and \ref
-    revolution_page "revolution". To create an empty mesh not based on a
+    revolution_page "revolution". To create an empty mesh not based on
     geometry, use the same dialog as to \ref constructing_meshes_page
     "construct the mesh on geometry" but specify neither the geometry
     nor meshing algorithms.
@@ -44,9 +44,9 @@ Mesh module provides several ways to create the mesh:
     (and exported to) the file in MED, UNV, STL, CGNS, DAT, GMF and
     SAUVE formats.
   </li>
-  <li>The 3D mesh can be generated from the 2D mesh not based on the geometry,
+  <li>The 3D mesh can be generated from the 2D mesh not based on geometry,
     which was either \ref importing_exporting_meshes_page "imported" or created in
-    other way. To setup the meshing parameters of a mesh not based on a geometry,
+    other way. To setup the meshing parameters of a mesh not based on geometry,
     just invoke \ref editing_meshes_page "Edit mesh / sub-mesh" command on
     your 2D mesh.
   </li>

doc/salome/gui/SMESH/input/constructing_meshes.doc

@@ -10,6 +10,9 @@ To create a mesh on geometry, it is necessary to create a mesh object by choosin
     taken into account by the chosen meshing algorithms.
 
 Then you can launch mesh generation by invoking \ref compute_anchor "Compute" command.
+The generated mesh will be automatically shown in the Viewer. You can
+switch off automatic visualization or limit mesh size until which it is
+automatically shown in \ref mesh_preferences_page (<em>Automatic update</em> entry).
 
 \note Sometimes \a hypotheses term is used to refer to both algorithms
 and hypotheses.

doc/salome/gui/SMESH/input/index.doc

@@ -1,6 +1,6 @@
 /*!
 
-\mainpage Introduction to MESH
+\mainpage Introduction to Mesh module
 
 \image html a-viewgeneral.png
 

doc/salome/gui/SMESH/input/max_element_length_2d.doc

@@ -2,8 +2,9 @@
 
 \page max_element_length_2d_page Element Diameter 2D
 
-\n This quality control criterion consists in calculation of the length of
+\n This quality control criterion consists in calculation of the maximal length of
-edges and diagonals combining 2D mesh elements (triangles and quadrangles).
+edges and diagonals of 2D mesh elements (triangles and quadrangles). For polygons
+the value is always zero.
 
 <em>To apply the Element Diameter 2D quality criterion to your mesh:</em>
 <ol>

doc/salome/gui/SMESH/input/max_element_length_3d.doc

@@ -2,9 +2,9 @@
 
 \page max_element_length_3d_page Element Diameter 3D
 
-\n This quality control criterion consists in calculation of the length of
+\n This quality control criterion consists in calculation of the maximal length of
-edges and diagonals combining 3D mesh elements
+edges and diagonals of 3D mesh elements (tetrahedrons, pyramids, etc). For polyhedra
-(tetrahedrons, pyramids, pentahendrons, hexahedrons and polyhedrons).
+the value is always zero. 
 
 <em>To apply the Element Diameter 3D quality criterion to your mesh:</em>
 <ol>

src/SMESHGUI/SMESHGUI.cxx

@@ -265,14 +265,16 @@ namespace
                                                   filter,
                                                   QObject::tr( "SMESH_IMPORT_MESH" ) );
     }
-    if ( filenames.count() > 0 ) {
+    if ( filenames.count() > 0 )
+    {
       SUIT_OverrideCursor wc;
       _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
 
       QStringList errors;
       QStringList anEntryList;
       bool isEmpty = false;
-      for ( QStringList::ConstIterator it = filenames.begin(); it != filenames.end(); ++it ) {
+      for ( QStringList::ConstIterator it = filenames.begin(); it != filenames.end(); ++it )
+      {
         QString filename = *it;
         SMESH::mesh_array_var aMeshes = new SMESH::mesh_array;
         try {
@@ -365,7 +367,8 @@ namespace
                          arg( QObject::tr( "SMESH_ERR_UNKNOWN_IMPORT_ERROR" ) ) );
         }
 
-        for ( int i = 0, iEnd = aMeshes->length(); i < iEnd; i++ ) {
+        for ( int i = 0, iEnd = aMeshes->length(); i < iEnd; i++ )
+        {
           _PTR(SObject) aMeshSO = SMESH::FindSObject( aMeshes[i] );
           if ( aMeshSO ) {
             _PTR(StudyBuilder) aBuilder = aStudy->NewBuilder();
@@ -1636,9 +1639,9 @@ namespace
   {
     SMESH_Actor::eControl aControl = SMESH_Actor::eControl( ActionToControl( theCommandID ));
     _PTR(Study) aStudy = SMESH::GetActiveStudyDocument();
-    LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr();
+
     SALOME_ListIO selected;
-    if ( aSel )
+    if ( LightApp_SelectionMgr *aSel = SMESHGUI::selectionMgr() )
       aSel->selectedObjects( selected );
 
     if ( !selected.IsEmpty() ) {
@@ -1652,7 +1655,17 @@ namespace
             CORBA::Object_var         aObject = SMESH::SObjectToObject( SO );
             SMESH::SMESH_IDSource_var anIDSrc = SMESH::SMESH_IDSource::_narrow( aObject );
             if ( !anIDSrc->_is_nil() ) {
-              if ( SMESH_Actor *anActor = SMESH::FindActorByEntry( anIO->getEntry()) ) {
+              SMESH_Actor *anActor = SMESH::FindActorByEntry( anIO->getEntry());
+              if (( !anActor && selected.Extent() == 1 ) &&
+                  ( anActor = SMESH::CreateActor( aStudy, anIO->getEntry() )))
+              {
+                anActor->SetControlMode( aControl );
+                SMESH::DisplayActor( SMESH::GetCurrentVtkView(), anActor );
+                SMESH::UpdateView  ( SMESH::eDisplay, anIO->getEntry() );
+              }
+              if ( anActor )
+              {
+                if ( anActor->GetControlMode() != aControl )
                   anActor->SetControlMode( aControl );
                 QString functorName = functorToString( anActor->GetFunctor() );
                 anActor->GetScalarBarActor()->SetTitle( functorName.toLatin1().constData() );
@@ -6832,17 +6845,17 @@ void SMESHGUI::onHypothesisEdit( int result )
 */
 void SMESHGUI::onUpdateControlActions()
 {
-  LightApp_SelectionMgr* aSel = SMESHGUI::selectionMgr();
   SALOME_ListIO selected;
-  if ( aSel )
+  if ( LightApp_SelectionMgr* aSel = SMESHGUI::selectionMgr() )
     aSel->selectedObjects( selected );
 
   SMESH_Actor::eControl aControl = SMESH_Actor::eNone;
   if ( selected.Extent() ) {
     if ( selected.First()->hasEntry() ) {
-      aControl = SMESH::FindActorByEntry( selected.First()->getEntry() )->GetControlMode();
+      if ( SMESH_Actor* anActor = SMESH::FindActorByEntry( selected.First()->getEntry() )) {
+        aControl = anActor->GetControlMode();
         SALOME_ListIteratorOfListIO it(selected);
-      for ( ; it.More(); it.Next() ) {
+        for ( it.Next(); it.More(); it.Next() ) {
           Handle(SALOME_InteractiveObject) anIO = it.Value();
           if ( anIO->hasEntry() ) {
             if ( SMESH_Actor* anActor = SMESH::FindActorByEntry( anIO->getEntry() ) ) {
@@ -6855,6 +6868,7 @@ void SMESHGUI::onUpdateControlActions()
         }
       }
     }
+  }
 
   int anAction = ActionToControl( aControl, true );
   if ( anAction)

src/SMESHGUI/SMESHGUI_ComputeDlg.cxx

@@ -954,9 +954,7 @@ void SMESHGUI_BaseComputeOp::computeMesh()
           SMESH::SMESH_GroupBase_var aGrp = aGroups[i];
           if ( CORBA::is_nil( aGrp ) ) continue;
           SMESH::SMESH_Group_var  aStdGroup  = SMESH::SMESH_Group::_narrow( aGrp );
-          SMESH::SMESH_GroupOnGeom_var   aGeomGroup = SMESH::SMESH_GroupOnGeom::_narrow( aGrp );
+          if ( !aStdGroup->_is_nil() ) continue; // don't update standalone groups
-          SMESH::SMESH_GroupOnFilter_var aFltGroup  = SMESH::SMESH_GroupOnFilter::_narrow( aGrp );
-          if ( !aStdGroup->_is_nil() ) continue; // don't update the standalone groups
           _PTR(SObject) aGroupSO = SMESH::FindSObject( aGrp );
           if ( !aGroupSO ) continue;
           SMESH::SMESH_IDSource_var aGroupObj =