PAL8375 improvement solving.

src/SMESH_SWIG/Makefile.in

@@ -84,7 +84,10 @@ EXPORT_PYSCRIPTS = libSMESH_Swig.py \
 		   SMESH_Sphere.py \
 		   SMESH_GroupFromGeom.py \
 		   SMESH_Nut.py \
-		   SMESH_GroupLyingOnGeom.py
+		   SMESH_GroupLyingOnGeom.py \
+		   PAL-MESH-041_mesh.py \
+		   PAL-MESH-043_2D.py \
+		   PAL-MESH-043_3D.py
 
 LIB_CLIENT_IDL = SALOMEDS.idl \
 		 SALOME_Exception.idl \

src/SMESH_SWIG/PAL-MESH-041_mesh.py

@@ -0,0 +1,103 @@
+import geompy
+import salome
+
+import StdMeshers
+
+#-----------------------------GEOM----------------------------------------
+
+#----------Vertexes------------
+p1 = geompy.MakeVertex(20.0,30.0,40.0)
+p2 = geompy.MakeVertex(90.0,80.0,0.0)
+p3 = geompy.MakeVertex(30.0,80.0,200.0)
+
+#----------Edges---------------
+e1 = geompy.MakeEdge(p1,p2)
+e2 = geompy.MakeEdge(p2,p3)
+e3 = geompy.MakeEdge(p3,p1)
+
+#----------Wire----------------
+ListOfEdges = []
+ListOfEdges.append(e3)
+ListOfEdges.append(e2)
+ListOfEdges.append(e1)
+wire1 = geompy.MakeWire(ListOfEdges)
+
+
+#----------Face----------------
+WantPlanarFace = 1
+face1 = geompy.MakeFace(wire1,WantPlanarFace)
+
+Id_face1 = geompy.addToStudy(face1,"Face1")
+
+
+
+#-----------------------------SMESH-------------------------------------------
+smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
+
+# -- Init --
+plane_mesh = salome.IDToObject( Id_face1)
+smesh.SetCurrentStudy(salome.myStudy)
+
+mesh = smesh.CreateMesh(plane_mesh)
+
+smeshgui = salome.ImportComponentGUI("SMESH")
+smeshgui.Init(salome.myStudyId)
+
+id_mesh = salome.ObjectToID(mesh)
+smeshgui.SetName( id_mesh, "Mesh_1")
+
+
+print"---------------------Hypothesis"
+
+
+#---------------- NumberOfSegments
+numberOfSegment = 9
+
+hypNbSeg = smesh.CreateHypothesis( "NumberOfSegments", "libStdMeshersEngine.so" )
+hypNbSeg.SetNumberOfSegments( numberOfSegment )
+
+print hypNbSeg.GetName()
+print hypNbSeg.GetNumberOfSegments()
+smeshgui.SetName(salome.ObjectToID(hypNbSeg), "Nb. Segments")
+
+
+#--------------------------Max. Element Area
+maxElementArea = 200
+
+hypArea200 = smesh.CreateHypothesis("MaxElementArea","libStdMeshersEngine.so")
+hypArea200.SetMaxElementArea( maxElementArea )
+print hypArea200.GetName()
+print hypArea200.GetMaxElementArea()
+
+smeshgui.SetName(salome.ObjectToID(hypArea200), "Max. Element Area")
+
+print"---------------------Algorithms"
+
+#----------------------------Wire discretisation
+algoWireDes = smesh.CreateHypothesis( "Regular_1D", "libStdMeshersEngine.so" )
+listHyp = algoWireDes.GetCompatibleHypothesis()
+
+print algoWireDes.GetName()
+smeshgui.SetName(salome.ObjectToID(algoWireDes), "Ware descritisation")
+
+#----------------------------Triangle (Mefisto)
+algoMef = smesh.CreateHypothesis( "MEFISTO_2D", "libStdMeshersEngine.so" )
+listHyp = algoMef.GetCompatibleHypothesis()
+
+print algoMef.GetName()
+
+#----------------------------Add hipothesis to the plane
+mesh.AddHypothesis( plane_mesh, hypNbSeg )     # nb segments
+mesh.AddHypothesis( plane_mesh, hypArea200 )   # max area
+
+mesh.AddHypothesis( plane_mesh, algoWireDes )  # Regular 1D/wire discretisation
+mesh.AddHypothesis( plane_mesh, algoMef )      # MEFISTO 2D
+
+smeshgui.SetName(salome.ObjectToID(algoMef), "Triangle (Mefisto)")
+
+print "---------------------Compute the mesh"
+
+smesh.Compute(mesh, plane_mesh)
+
+salome.sg.updateObjBrowser(1)
+

src/SMESH_SWIG/PAL-MESH-043_2D.py

@@ -0,0 +1,102 @@
+#  Copyright (C) 2003  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+#  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS 
+# 
+#  This library is free software; you can redistribute it and/or 
+#  modify it under the terms of the GNU Lesser General Public 
+#  License as published by the Free Software Foundation; either 
+#  version 2.1 of the License. 
+# 
+#  This library is distributed in the hope that it will be useful, 
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+#  Lesser General Public License for more details. 
+# 
+#  You should have received a copy of the GNU Lesser General Public 
+#  License along with this library; if not, write to the Free Software 
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA 
+# 
+#  See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org 
+#
+#
+#
+#  File        : SMESH_testExtrusion2D.py
+#  Module      : SMESH
+#  Description : Create meshes to test extrusion of mesh elements along path
+
+import salome
+import geompy
+import SMESH
+import StdMeshers
+
+#----------------------------------GEOM
+
+# create points
+p1 = geompy.MakeVertex(100, 0, 0)
+p2 = geompy.MakeVertex(100, 0, 100)
+p3 = geompy.MakeVertex(0, 0, 0)
+p4 = geompy.MakeVertex(0, 100, 0)
+
+
+# create two vectors
+vector1 = geompy.MakeVector(p1,p2)
+vector2 = geompy.MakeVector(p3,p4)
+
+# make two ellipses
+ellipse1 = geompy.MakeEllipse(p1,vector1,50,25)
+ellipse2 = geompy.MakeEllipse(p3,vector2,300,50)
+
+# publish circular face and second circle
+id_ellipse1 = geompy.addToStudy(ellipse1, "Ellips 1")
+id_ellipse2 = geompy.addToStudy(ellipse2, "Ellips 2")
+
+
+#---------------------------------SMESH
+# get smesh engine
+smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
+smesh.SetCurrentStudy(salome.myStudy)
+
+# get SMESH GUI
+smeshgui = salome.ImportComponentGUI("SMESH")
+smeshgui.Init(salome.myStudyId)
+
+# create hypoteses
+hypNbSeg1 = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
+hypNbSeg1.SetNumberOfSegments(18)
+id_hypNbSeg1 = salome.ObjectToID(hypNbSeg1) 
+smeshgui.SetName(id_hypNbSeg1, "NumberOfSegments 1");
+
+hypNbSeg2 = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
+hypNbSeg2.SetNumberOfSegments(34)
+id_hypNbSeg2 = salome.ObjectToID(hypNbSeg2) 
+smeshgui.SetName(id_hypNbSeg2, "NumberOfSegments 2");
+
+# create algorithmes
+algoReg = smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
+id_algoReg = salome.ObjectToID(algoReg)
+smeshgui.SetName(id_algoReg, "Regular_1D");
+
+# create the path mesh
+mesh1 = smesh.CreateMesh(ellipse1)
+id_mesh1 = salome.ObjectToID(mesh1)
+smeshgui.SetName(id_mesh1, "Path Mesh");
+
+# set hypotheses and algos
+mesh1.AddHypothesis(ellipse1,algoReg)
+mesh1.AddHypothesis(ellipse1,hypNbSeg1)
+
+# create the tool mesh
+mesh2 = smesh.CreateMesh(ellipse2)
+id_mesh2 = salome.ObjectToID(mesh2)
+smeshgui.SetName(id_mesh2, "Tool Mesh");
+
+# set hypotheses and algos
+mesh2.AddHypothesis(ellipse2,algoReg)
+mesh2.AddHypothesis(ellipse2,hypNbSeg2)
+
+# compute meshes
+smesh.Compute(mesh1,ellipse1)
+smesh.Compute(mesh2,ellipse2)
+
+
+# ---- udate object browser
+salome.sg.updateObjBrowser(1);

src/SMESH_SWIG/PAL-MESH-043_3D.py

@@ -0,0 +1,104 @@
+#  Copyright (C) 2003  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+#  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS 
+# 
+#  This library is free software; you can redistribute it and/or 
+#  modify it under the terms of the GNU Lesser General Public 
+#  License as published by the Free Software Foundation; either 
+#  version 2.1 of the License. 
+# 
+#  This library is distributed in the hope that it will be useful, 
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of 
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
+#  Lesser General Public License for more details. 
+# 
+#  You should have received a copy of the GNU Lesser General Public 
+#  License along with this library; if not, write to the Free Software 
+#  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA 
+# 
+#  See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org 
+#
+#
+#
+#  File        : SMESH_testExtrusion3D.py
+#  Module      : SMESH
+#  Description : Create meshes to test extrusion of mesh elements along path
+
+import salome
+import geompy
+import SMESH
+import StdMeshers
+
+# get smesh engine
+smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
+smesh.SetCurrentStudy(salome.myStudy)
+
+# create points to build two circles
+p1 = geompy.MakeVertex(0,  100,  0)
+p2 = geompy.MakeVertex(100,  0,  0)
+p3 = geompy.MakeVertex(0, -100,  0)
+p4 = geompy.MakeVertex(0,   70,  0)
+p5 = geompy.MakeVertex(0,  100, 30)
+p6 = geompy.MakeVertex(0,  130,  0)
+
+# create two circles
+circle = geompy.MakeCircleThreePnt(p1, p2, p3)
+cf     = geompy.MakeCircleThreePnt(p4, p5, p6)
+
+# make circular face
+wire = geompy.MakeWire([cf])
+face = geompy.MakeFace(wire, 1)
+
+# publish circular face and second circle
+idcircle = geompy.addToStudy(circle, "Circle")
+idface   = geompy.addToStudy(face,   "Circular face")
+
+# get SMESH GUI
+smeshgui = salome.ImportComponentGUI("SMESH")
+smeshgui.Init(salome.myStudyId)
+
+# create hypoteses
+hypNbSeg = smesh.CreateHypothesis("NumberOfSegments", "libStdMeshersEngine.so")
+hypNbSeg.SetNumberOfSegments(12)
+idseg = salome.ObjectToID(hypNbSeg) 
+smeshgui.SetName(idseg, "NumberOfSegments_10");
+
+hypArea = smesh.CreateHypothesis("MaxElementArea", "libStdMeshersEngine.so")
+hypArea.SetMaxElementArea(30)
+idarea = salome.ObjectToID(hypArea)
+smeshgui.SetName(idarea, "MaxElementArea_20");
+
+# create algorithmes
+algoReg = smesh.CreateHypothesis("Regular_1D", "libStdMeshersEngine.so")
+idreg = salome.ObjectToID(algoReg)
+smeshgui.SetName(idreg, "Regular_1D");
+
+algoMef = smesh.CreateHypothesis("MEFISTO_2D", "libStdMeshersEngine.so")
+idmef = salome.ObjectToID(algoMef)
+smeshgui.SetName(idmef, "MEFISTO_2D");
+
+# init a Mesh with the circular face
+mesh1 = smesh.CreateMesh(face)
+idmesh1 = salome.ObjectToID(mesh1)
+smeshgui.SetName(idmesh1, "Mesh on circular face");
+
+# set hypotheses and algos
+mesh1.AddHypothesis(face,algoReg)
+mesh1.AddHypothesis(face,hypNbSeg)
+mesh1.AddHypothesis(face,algoMef)
+mesh1.AddHypothesis(face,hypArea)
+
+# init a Mesh with the second circle
+mesh2 = smesh.CreateMesh(circle)
+idmesh2 = salome.ObjectToID(mesh2)
+smeshgui.SetName(idmesh2, "Mesh on circular edge");
+
+# set hypotheses and algos
+mesh2.AddHypothesis(circle,algoReg)
+mesh2.AddHypothesis(circle,hypNbSeg)
+
+# compute meshes
+smesh.Compute(mesh1,face)
+smesh.Compute(mesh2,circle)
+
+# ---- udate object browser
+salome.sg.updateObjBrowser(1);