From de56eb6c9fd8de952cf1fc69ac31d759499083c4 Mon Sep 17 00:00:00 2001 From: eap Date: Tue, 5 Dec 2017 14:47:35 +0300 Subject: [PATCH] typo-fix by Kunda http://www.salome-platform.org/forum/forum_9/621049380 --- src/MEDWrapper/Base/MED_Structures.hxx | 10 +- src/MEDWrapper/Base/MED_Wrapper.hxx | 24 +- src/SMESH/SMESH_MeshEditor.hxx | 6 +- src/SMESHGUI/SMESHGUI_FilterDlg.cxx | 2 +- src/SMESHGUI/SMESHGUI_MeshInfo.cxx | 78 +++--- src/SMESHGUI/SMESHGUI_VTKUtils.cxx | 4 +- src/SMESHGUI/SMESH_msg_en.ts | 2 +- src/SMESH_I/SMESH_2smeshpy.cxx | 248 +++++++++--------- src/SMESH_I/SMESH_Filter_i.cxx | 4 +- src/SMESH_SWIG/smeshBuilder.py | 4 +- src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx | 2 +- src/Tools/MacMesh/MacMesh/PublishGroups.py | 4 +- src/Tools/MeshCut/MeshCut_Maillage.cxx | 2 +- src/Tools/YamsPlug/doc/Generics_params.rst | 2 +- 14 files changed, 196 insertions(+), 196 deletions(-) diff --git a/src/MEDWrapper/Base/MED_Structures.hxx b/src/MEDWrapper/Base/MED_Structures.hxx index b6029949b..534e35bd8 100644 --- a/src/MEDWrapper/Base/MED_Structures.hxx +++ b/src/MEDWrapper/Base/MED_Structures.hxx @@ -181,7 +181,7 @@ namespace MED typedef TIntVector TElemNum; typedef SharedPtr PElemNum; - //! Define a parent class for all MED entities that describes mesh entites such as nodes and cells. + //! Define a parent class for all MED entities that describes mesh entities such as nodes and cells. struct MEDWRAPPER_EXPORT TElemInfo: virtual TBase { PMeshInfo myMeshInfo; //!< A reference to correspondig MED Mesh @@ -191,7 +191,7 @@ namespace MED TInt myNbElem; //setObjectName("nbQuadraticTriangle"); QLabel* a2DTriBiQuad = createField(); - a2DTriBiQuad->setObjectName("nbBiQuadraticTriangle"); + a2DTriBiQuad->setObjectName("nbBiQuadraticTriangle"); QLabel* a2DQuaLab = new QLabel( tr( "QUADRANGLES_LAB" ), this ); QLabel* a2DQuaTotal = createField(); a2DQuaTotal->setObjectName("nbQuadrangle"); @@ -941,7 +941,7 @@ void SMESHGUI_MeshInfo::saveInfo( QTextStream &out ) \param parent parent widget */ SMESHGUI_ElemInfo::SMESHGUI_ElemInfo( QWidget* parent ) -: QWidget( parent ), myActor( 0 ), myIsElement( -1 ) + : QWidget( parent ), myActor( 0 ), myIsElement( -1 ) { myFrame = new QWidget( this ); myExtra = new ExtraWidget( this ); @@ -1165,7 +1165,7 @@ void SMESHGUI_ElemInfo::updateControls() \param parent parent widget */ SMESHGUI_SimpleElemInfo::SMESHGUI_SimpleElemInfo( QWidget* parent ) -: SMESHGUI_ElemInfo( parent ) + : SMESHGUI_ElemInfo( parent ) { myInfo = new QTextBrowser( frame() ); QVBoxLayout* l = new QVBoxLayout( frame() ); @@ -1180,12 +1180,12 @@ SMESHGUI_SimpleElemInfo::SMESHGUI_SimpleElemInfo( QWidget* parent ) void SMESHGUI_SimpleElemInfo::information( const QList& ids ) { clearInternal(); - + if ( actor() ) { int grp_details = SMESHGUI::resourceMgr()->booleanValue( "SMESH", "elem_info_grp_details", false ); int precision = SMESHGUI::resourceMgr()->integerValue( "SMESH", "length_precision", 6 ); int cprecision = -1; - if ( SMESHGUI::resourceMgr()->booleanValue( "SMESH", "use_precision", false )) + if ( SMESHGUI::resourceMgr()->booleanValue( "SMESH", "use_precision", false )) cprecision = SMESHGUI::resourceMgr()->integerValue( "SMESH", "controls_precision", -1 ); foreach ( long id, ids ) { if ( !isElements() ) { @@ -1230,7 +1230,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) myInfo->append( QString( "%1" ).arg( SMESHGUI_ElemInfo::tr( "FREE_NODE" )).arg( id )); } // node position - SMESH::SMESH_Mesh_ptr aMeshPtr = actor()->GetObject()->GetMeshServer(); + SMESH::SMESH_Mesh_ptr aMeshPtr = actor()->GetObject()->GetMeshServer(); if ( !CORBA::is_nil( aMeshPtr )) { SMESH::NodePosition_var pos = aMeshPtr->GetNodePosition( id ); int shapeID = pos->shapeID; @@ -1246,8 +1246,8 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) case GEOM::FACE: shapeType = SMESHGUI_ElemInfo::tr( "GEOM_FACE" ); if ( pos->params.length() == 2 ) { - u = pos->params[0]; - v = pos->params[1]; + u = pos->params[0]; + v = pos->params[1]; } break; case GEOM::VERTEX: @@ -1291,7 +1291,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) SMESH::SMESH_Group_var aStdGroup = SMESH::SMESH_Group::_narrow( aGrp ); SMESH::SMESH_GroupOnGeom_var aGeomGroup = SMESH::SMESH_GroupOnGeom::_narrow( aGrp ); SMESH::SMESH_GroupOnFilter_var aFltGroup = SMESH::SMESH_GroupOnFilter::_narrow( aGrp ); - + // type : group on geometry, standalone group, group on filter if ( !CORBA::is_nil( aStdGroup )) { myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "TYPE" )). @@ -1311,11 +1311,11 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "TYPE" )). arg( SMESHGUI_AddInfo::tr( "GROUP_ON_FILTER" )) ); } - + // size myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "SIZE" )). arg( QString::number( aGrp->Size() )) ); - + // color SALOMEDS::Color color = aGrp->GetColor(); myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "COLOR" )). @@ -1328,11 +1328,11 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) else { // // show element info - // + // const SMDS_MeshElement* e = actor()->GetObject()->GetMesh()->FindElement( id ); SMESH::Controls::NumericalFunctorPtr afunctor; if ( !e ) return; - + // Element ID && Type QString stype; switch( e->GetType() ) { @@ -1346,7 +1346,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) stype = SMESHGUI_ElemInfo::tr( "FACE" ); break; case SMDSAbs_Volume: stype = SMESHGUI_ElemInfo::tr( "VOLUME" ); break; - default: + default: break; } if ( stype.isEmpty() ) return; @@ -1387,7 +1387,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) case SMDSEntity_Polyhedra: case SMDSEntity_Quad_Polyhedra: gtype = SMESHGUI_ElemInfo::tr( "POLYHEDRON" ); break; - default: + default: break; } if ( !gtype.isEmpty() ) @@ -1446,39 +1446,39 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) afunctor.reset( new SMESH::Controls::Length() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); - myInfo->append( QString( "- %1: %2" ).arg( tr( "LENGTH_EDGES" )).arg( afunctor->GetValue( id )) ); + myInfo->append( QString( "- %1: %2" ).arg( tr( "LENGTH_EDGES" )).arg( afunctor->GetValue( id )) ); } if( e->GetType() == SMDSAbs_Face ) { //Area afunctor.reset( new SMESH::Controls::Area() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); - afunctor->SetPrecision( cprecision ); + afunctor->SetPrecision( cprecision ); myInfo->append( QString( "- %1: %2" ).arg( tr( "AREA_ELEMENTS" )).arg( afunctor->GetValue( id )) ); //Taper afunctor.reset( new SMESH::Controls::Taper() ); - afunctor->SetMesh( actor()->GetObject()->GetMesh() ); + afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); myInfo->append( QString( "- %1: %2" ).arg( tr( "TAPER_ELEMENTS" )).arg( afunctor->GetValue( id )) ); //AspectRatio2D afunctor.reset( new SMESH::Controls::AspectRatio() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); myInfo->append( QString( "- %1: %2" ).arg( tr( "ASPECTRATIO_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //Minimum angle + //Minimum angle afunctor.reset( new SMESH::Controls::MinimumAngle() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); myInfo->append( QString( "- %1: %2" ).arg( tr( "MINIMUMANGLE_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //Wraping angle + //Warping angle afunctor.reset( new SMESH::Controls::Warping() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); myInfo->append( QString( "- %1: %2" ).arg( tr( "WARP_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //Skew + //Skew afunctor.reset( new SMESH::Controls::Skew() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); myInfo->append( QString( "- %1: %2" ).arg( tr( "SKEW_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //ElemDiam2D + //ElemDiam2D afunctor.reset( new SMESH::Controls::MaxElementLength2D() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); @@ -1493,11 +1493,11 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) afunctor.reset( new SMESH::Controls::AspectRatio3D() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); myInfo->append( QString( "- %1: %2" ).arg( tr( "ASPECTRATIO_3D_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //Volume + //Volume afunctor.reset( new SMESH::Controls::Volume() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); myInfo->append( QString( "- %1: %2" ).arg( tr( "VOLUME_3D_ELEMENTS" )).arg( afunctor->GetValue( id )) ); - //ElementDiameter3D + //ElementDiameter3D afunctor.reset( new SMESH::Controls::Volume() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); myInfo->append( QString( "- %1: %2" ).arg( tr( "MAX_ELEMENT_LENGTH_3D" )).arg( afunctor->GetValue( id )) ); @@ -1508,7 +1508,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) // Gravity center XYZ gc = gravityCenter( e ); myInfo->append( QString( "%1: (%2, %3, %4)" ).arg( SMESHGUI_ElemInfo::tr( "GRAVITY_CENTER" )).arg( gc.x() ).arg( gc.y() ).arg( gc.z() )); - + // Normal vector if( e->GetType() == SMDSAbs_Face ) { XYZ gc = normal( e ); @@ -1517,7 +1517,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) // Element position if ( e->GetType() >= SMDSAbs_Edge && e->GetType() <= SMDSAbs_Volume ) { - SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer(); + SMESH::SMESH_Mesh_ptr aMesh = actor()->GetObject()->GetMeshServer(); if ( !CORBA::is_nil( aMesh )) { SMESH::ElementPosition pos = aMesh->GetElementPosition( id ); int shapeID = pos.shapeID; @@ -1557,7 +1557,7 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) SMESH::SMESH_Group_var aStdGroup = SMESH::SMESH_Group::_narrow( aGrp ); SMESH::SMESH_GroupOnGeom_var aGeomGroup = SMESH::SMESH_GroupOnGeom::_narrow( aGrp ); SMESH::SMESH_GroupOnFilter_var aFltGroup = SMESH::SMESH_GroupOnFilter::_narrow( aGrp ); - + // type : group on geometry, standalone group, group on filter if ( !CORBA::is_nil( aStdGroup )) { myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "TYPE" )). @@ -1577,10 +1577,10 @@ void SMESHGUI_SimpleElemInfo::information( const QList& ids ) myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "TYPE" )). arg( SMESHGUI_AddInfo::tr( "GROUP_ON_FILTER" )) ); } - + myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "SIZE" )). arg( QString::number( aGrp->Size() )) ); - + // color SALOMEDS::Color color = aGrp->GetColor(); myInfo->append( QString( " - %1: %2" ).arg( SMESHGUI_AddInfo::tr( "COLOR" )). @@ -1659,7 +1659,7 @@ QWidget* SMESHGUI_TreeElemInfo::ItemDelegate::createEditor( QWidget* parent, con \param parent parent widget */ SMESHGUI_TreeElemInfo::SMESHGUI_TreeElemInfo( QWidget* parent ) -: SMESHGUI_ElemInfo( parent ) + : SMESHGUI_ElemInfo( parent ) { myInfo = new QTreeWidget( frame() ); myInfo->setColumnCount( 2 ); @@ -1999,7 +1999,7 @@ void SMESHGUI_TreeElemInfo::information( const QList& ids ) QTreeWidgetItem* taperlItem = createItem( cntrItem, Bold ); taperlItem->setText( 0, tr( "TAPER_ELEMENTS" )); taperlItem->setText( 1, QString( "%1" ).arg( afunctor->GetValue( id )) ); - //Wraping angle + //Warping angle afunctor.reset( new SMESH::Controls::Warping() ); afunctor->SetMesh( actor()->GetObject()->GetMesh() ); afunctor->SetPrecision( cprecision ); @@ -2409,7 +2409,7 @@ void GrpComputor::compute() \param parent parent widget */ SMESHGUI_AddInfo::SMESHGUI_AddInfo( QWidget* parent ) -: QTreeWidget( parent ) + : QTreeWidget( parent ) { setColumnCount( 2 ); header()->setStretchLastSection( true ); @@ -3650,12 +3650,12 @@ void SMESHGUI_CtrlInfo::showInfo( SMESH::SMESH_IDSource_ptr obj ) computeOverConstrainedVolumesInfo(); // aspect Ratio 3D histogram computeAspectRatio3D(); - } - else { - myButtons[7]->setEnabled( true ); - myButtons[8]->setEnabled( true ); - myButtons[9]->setEnabled( true ); - } + } + else { + myButtons[7]->setEnabled( true ); + myButtons[8]->setEnabled( true ); + myButtons[9]->setEnabled( true ); + } #ifdef DISABLE_PLOT2DVIEWER myMainLayout->setRowStretch(17,0); for( int i=35; i<=37; i++) @@ -3883,7 +3883,7 @@ void SMESHGUI_CtrlInfo::saveInfo( QTextStream &out ) { \param parent parent widget */ SMESHGUI_CtrlInfoDlg::SMESHGUI_CtrlInfoDlg( QWidget* parent ) -: QDialog( parent ) + : QDialog( parent ) { setAttribute( Qt::WA_DeleteOnClose, true ); setWindowTitle( tr( "CTRL_INFO" )); diff --git a/src/SMESHGUI/SMESHGUI_VTKUtils.cxx b/src/SMESHGUI/SMESHGUI_VTKUtils.cxx index 5c5bbab52..10bc6ba22 100644 --- a/src/SMESHGUI/SMESHGUI_VTKUtils.cxx +++ b/src/SMESHGUI/SMESHGUI_VTKUtils.cxx @@ -362,7 +362,7 @@ namespace SMESH } if ( objModified ) { - // PAL16631. Mesurements showed that to show aVisualObj in SHADING(default) mode, + // PAL16631. Measurements showed that to show aVisualObj in SHADING(default) mode, // ~5 times more memory is used than it occupies. // Warn the user if there is less free memory than 30 sizes of a grid // TODO: estimate memory usage in other modes and take current mode into account @@ -396,7 +396,7 @@ namespace SMESH /*! Return active view window, if it instantiates SVTK_ViewWindow class, - * overwise find or create corresponding view window, make it active and return it. + * otherwise find or create corresponding view window, make it active and return it. * \note Active VVTK_ViewWindow can be returned, because it inherits SVTK_ViewWindow. */ SVTK_ViewWindow* GetViewWindow (const SalomeApp_Module* theModule, diff --git a/src/SMESHGUI/SMESH_msg_en.ts b/src/SMESHGUI/SMESH_msg_en.ts index 3e6896d59..e0c7ad1d2 100644 --- a/src/SMESHGUI/SMESH_msg_en.ts +++ b/src/SMESHGUI/SMESH_msg_en.ts @@ -2148,7 +2148,7 @@ Check algorithm documentation for supported geometry SMESH_MESHINFO_ALL_TYPES - Heterogenous + Heterogeneous SMESH_MESHINFO_EDGES diff --git a/src/SMESH_I/SMESH_2smeshpy.cxx b/src/SMESH_I/SMESH_2smeshpy.cxx index 2718b0c1d..3c70da492 100644 --- a/src/SMESH_I/SMESH_2smeshpy.cxx +++ b/src/SMESH_I/SMESH_2smeshpy.cxx @@ -606,7 +606,7 @@ const char* _pyGen::AccessorMethod() const //================================================================================ /*! * \brief Convert a command using a specific converter - * \param theCommand - the command to convert + * \param theCommand - the command to convert */ //================================================================================ @@ -860,8 +860,8 @@ Handle(_pyCommand) _pyGen::AddCommand( const TCollection_AsciiString& theCommand aCommand->GetString() += tmpCmd.GetString(); } // IMP issue 0021014 - // set GetCriterion(elementType,CritType,Compare,Treshold,UnaryOp,BinaryOp,Tolerance) - // 1 2 3 4 5 6 7 + // set GetCriterion(elementType,CritType,Compare,Threshold,UnaryOp,BinaryOp,Tolerance) + // 1 2 3 4 5 6 7 // instead of "SMESH.Filter.Criterion( // Type,Compare,Threshold,ThresholdStr,ThresholdID,UnaryOp,BinaryOp,Tolerance,TypeOfElement,Precision) // 1 2 3 4 5 6 7 8 9 10 @@ -969,7 +969,7 @@ Handle(_pyCommand) _pyGen::AddCommand( const TCollection_AsciiString& theCommand //================================================================================ /*! * \brief Convert the command or remember it for later conversion - * \param theCommand - The python command calling a method of SMESH_Gen + * \param theCommand - The python command calling a method of SMESH_Gen */ //================================================================================ @@ -1278,8 +1278,8 @@ void _pyGen::Free() //================================================================================ /*! * \brief Add access method to mesh that is an argument - * \param theCmd - command to add access method - * \retval bool - true if added + * \param theCmd - command to add access method + * \retval bool - true if added */ //================================================================================ @@ -1297,8 +1297,8 @@ bool _pyGen::AddMeshAccessorMethod( Handle(_pyCommand) theCmd ) const //================================================================================ /*! * \brief Add access method to algo that is an object or an argument - * \param theCmd - command to add access method - * \retval bool - true if added + * \param theCmd - command to add access method + * \retval bool - true if added */ //================================================================================ @@ -1319,8 +1319,8 @@ bool _pyGen::AddAlgoAccessorMethod( Handle(_pyCommand) theCmd ) const //================================================================================ /*! * \brief Find hypothesis by ID (entry) - * \param theHypID - The hypothesis ID - * \retval Handle(_pyHypothesis) - The found hypothesis + * \param theHypID - The hypothesis ID + * \retval Handle(_pyHypothesis) - The found hypothesis */ //================================================================================ @@ -1337,10 +1337,10 @@ Handle(_pyHypothesis) _pyGen::FindHyp( const _pyID& theHypID ) //================================================================================ /*! * \brief Find algorithm able to create a hypothesis - * \param theGeom - The shape ID the algorithm was created on - * \param theMesh - The mesh ID that created the algorithm - * \param theHypothesis - The hypothesis the algorithm should be able to create - * \retval Handle(_pyHypothesis) - The found algo + * \param theGeom - The shape ID the algorithm was created on + * \param theMesh - The mesh ID that created the algorithm + * \param theHypothesis - The hypothesis the algorithm should be able to create + * \retval Handle(_pyHypothesis) - The found algo */ //================================================================================ @@ -1361,8 +1361,8 @@ Handle(_pyHypothesis) _pyGen::FindAlgo( const _pyID& theGeom, const _pyID& theMe //================================================================================ /*! * \brief Find subMesh by ID (entry) - * \param theSubMeshID - The subMesh ID - * \retval Handle(_pySubMesh) - The found subMesh + * \param theSubMeshID - The subMesh ID + * \retval Handle(_pySubMesh) - The found subMesh */ //================================================================================ @@ -1378,8 +1378,8 @@ Handle(_pySubMesh) _pyGen::FindSubMesh( const _pyID& theSubMeshID ) //================================================================================ /*! * \brief Change order of commands in the script - * \param theCmd1 - One command - * \param theCmd2 - Another command + * \param theCmd1 - One command + * \param theCmd2 - Another command */ //================================================================================ @@ -1396,15 +1396,15 @@ void _pyGen::ExchangeCommands( Handle(_pyCommand) theCmd1, Handle(_pyCommand) th int nb1 = theCmd1->GetOrderNb(); theCmd1->SetOrderNb( theCmd2->GetOrderNb() ); theCmd2->SetOrderNb( nb1 ); -// cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl -// << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl; + // cout << "BECOME " << theCmd1->GetOrderNb() << "\t" << theCmd1->GetString() << endl + // << "BECOME " << theCmd2->GetOrderNb() << "\t" << theCmd2->GetString() << endl << endl; } //================================================================================ /*! * \brief Set one command after the other - * \param theCmd - Command to move - * \param theAfterCmd - Command ater which to insert the first one + * \param theCmd - Command to move + * \param theAfterCmd - Command ater which to insert the first one */ //================================================================================ @@ -1416,8 +1416,8 @@ void _pyGen::SetCommandAfter( Handle(_pyCommand) theCmd, Handle(_pyCommand) theA //================================================================================ /*! * \brief Set one command before the other - * \param theCmd - Command to move - * \param theBeforeCmd - Command before which to insert the first one + * \param theCmd - Command to move + * \param theBeforeCmd - Command before which to insert the first one */ //================================================================================ @@ -1429,8 +1429,8 @@ void _pyGen::SetCommandBefore( Handle(_pyCommand) theCmd, Handle(_pyCommand) the //================================================================================ /*! * \brief Set one command before or after the other - * \param theCmd - Command to move - * \param theOtherCmd - Command ater or before which to insert the first one + * \param theCmd - Command to move + * \param theOtherCmd - Command ater or before which to insert the first one */ //================================================================================ @@ -1457,7 +1457,7 @@ void _pyGen::setNeighbourCommand( Handle(_pyCommand)& theCmd, // void _pyGen::addFilterUser( Handle(_pyCommand)& theCommand, const Handle(_pyObject)& user ) // { - // No more needed after adding _pyObject::myArgCommands +// No more needed after adding _pyObject::myArgCommands // const char filterPrefix[] = "aFilter0x"; // if ( theCommand->GetString().Search( filterPrefix ) < 1 ) @@ -1483,7 +1483,7 @@ void _pyGen::setNeighbourCommand( Handle(_pyCommand)& theCmd, //================================================================================ /*! * \brief Set command be last in list of commands - * \param theCmd - Command to be last + * \param theCmd - Command to be last */ //================================================================================ @@ -1495,8 +1495,8 @@ Handle(_pyCommand)& _pyGen::GetLastCommand() //================================================================================ /*! * \brief Set method to access to object wrapped with python class - * \param theID - The wrapped object entry - * \param theMethod - The accessor method + * \param theID - The wrapped object entry + * \param theMethod - The accessor method */ //================================================================================ @@ -1508,7 +1508,7 @@ void _pyGen::SetAccessorMethod(const _pyID& theID, const char* theMethod ) //================================================================================ /*! * \brief Generated new ID for object and assign with existing name - * \param theID - ID of existing object + * \param theID - ID of existing object */ //================================================================================ @@ -1548,7 +1548,7 @@ bool _pyGen::AddObject( Handle(_pyObject)& theObj ) } else if ( theObj->IsKind( STANDARD_TYPE( _pyMeshEditor ))) { add = myMeshEditors.insert( make_pair( theObj->GetID(), - Handle(_pyMeshEditor)::DownCast( theObj ))).second; + Handle(_pyMeshEditor)::DownCast( theObj ))).second; } else { add = myObjects.insert( make_pair( theObj->GetID(), theObj )).second; @@ -1792,7 +1792,7 @@ _pyMesh::_pyMesh(const Handle(_pyCommand) theCreationCmd, const _pyID& meshId): //================================================================================ /*! * \brief Convert an IDL API command of SMESH::SMESH_Mesh to a method call of python Mesh - * \param theCommand - Engine method called for this mesh + * \param theCommand - Engine method called for this mesh */ //================================================================================ @@ -2622,7 +2622,7 @@ bool _pyMeshEditor::CanClear() //================================================================================ /*! * \brief _pyHypothesis constructor - * \param theCreationCmd - + * \param theCreationCmd - */ //================================================================================ @@ -2635,8 +2635,8 @@ _pyHypothesis::_pyHypothesis(const Handle(_pyCommand)& theCreationCmd): //================================================================================ /*! * \brief Creates algorithm or hypothesis - * \param theCreationCmd - The engine command creating a hypothesis - * \retval Handle(_pyHypothesis) - Result _pyHypothesis + * \param theCreationCmd - The engine command creating a hypothesis + * \retval Handle(_pyHypothesis) - Result _pyHypothesis */ //================================================================================ @@ -2725,9 +2725,9 @@ bool _pyHypothesis::IsWrappable(const _pyID& theMesh) const //================================================================================ /*! * \brief Convert the command adding a hypothesis to mesh into a smesh command - * \param theCmd - The command like mesh.AddHypothesis( geom, hypo ) - * \param theAlgo - The algo that can create this hypo - * \retval bool - false if the command can't be converted + * \param theCmd - The command like mesh.AddHypothesis( geom, hypo ) + * \param theAlgo - The algo that can create this hypo + * \retval bool - false if the command can't be converted */ //================================================================================ @@ -2790,7 +2790,7 @@ bool _pyHypothesis::Addition2Creation( const Handle(_pyCommand)& theCmd, //================================================================================ /*! * \brief Remember hypothesis parameter values - * \param theCommand - The called hypothesis method + * \param theCommand - The called hypothesis method */ //================================================================================ @@ -3143,7 +3143,7 @@ void _pyHypothesis::setCreationArg( const int argNb, const _AString& arg ) //================================================================================ /*! * \brief Remember hypothesis parameter values - * \param theCommand - The called hypothesis method + * \param theCommand - The called hypothesis method */ //================================================================================ @@ -3198,8 +3198,8 @@ void _pyComplexParamHypo::Process( const Handle(_pyCommand)& theCommand) { CreationMethod& crMethod = type2meth->second; while ( (int) crMethod.myArgs.size() < i+1 ) - crMethod.myArgs.push_back( "[]" ); - crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value + crMethod.myArgs.push_back( "[]" ); + crMethod.myArgs[ i ] = theCommand->GetArg( 1 ); // arg value } myArgCommands.push_back( theCommand ); } @@ -3243,7 +3243,7 @@ void _pyComplexParamHypo::Flush() //================================================================================ /*! * \brief Convert methods of 1D hypotheses to my own methods - * \param theCommand - The called hypothesis method + * \param theCommand - The called hypothesis method */ //================================================================================ @@ -3280,9 +3280,9 @@ void _pyLayerDistributionHypo::Process( const Handle(_pyCommand)& theCommand) //================================================================================ /*! * \brief - * \param theAdditionCmd - command to be converted - * \param theMesh - mesh instance - * \retval bool - status + * \param theAdditionCmd - command to be converted + * \param theMesh - mesh instance + * \retval bool - status */ //================================================================================ @@ -3384,9 +3384,9 @@ void _pyLayerDistributionHypo::Flush() //================================================================================ /*! * \brief additionally to Addition2Creation, clears SetDistrType() command - * \param theCmd - AddHypothesis() command - * \param theMesh - mesh to which a hypothesis is added - * \retval bool - conversion result + * \param theCmd - AddHypothesis() command + * \param theMesh - mesh to which a hypothesis is added + * \retval bool - conversion result */ //================================================================================ @@ -3466,9 +3466,9 @@ void _pyNumberOfSegmentsHyp::Flush() /*! * \brief Convert the command adding "SegmentLengthAroundVertex" to mesh * into regular1D.LengthNearVertex( length, vertex ) - * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex ) - * \param theMesh - The mesh needing this hypo - * \retval bool - false if the command can't be converted + * \param theCmd - The command like mesh.AddHypothesis( vertex, SegmentLengthAroundVertex ) + * \param theMesh - The mesh needing this hypo + * \retval bool - false if the command can't be converted */ //================================================================================ @@ -3511,7 +3511,7 @@ bool _pySegmentLengthAroundVertexHyp::Addition2Creation( const Handle(_pyCommand //================================================================================ /*! * \brief _pyAlgorithm constructor - * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)" + * \param theCreationCmd - The command like "algo = smeshgen.CreateHypothesis(type,lib)" */ //================================================================================ @@ -3524,9 +3524,9 @@ _pyAlgorithm::_pyAlgorithm(const Handle(_pyCommand)& theCreationCmd) //================================================================================ /*! * \brief Convert the command adding an algorithm to mesh - * \param theCmd - The command like mesh.AddHypothesis( geom, algo ) - * \param theMesh - The mesh needing this algo - * \retval bool - false if the command can't be converted + * \param theCmd - The command like mesh.AddHypothesis( geom, algo ) + * \param theMesh - The mesh needing this algo + * \retval bool - false if the command can't be converted */ //================================================================================ @@ -3544,8 +3544,8 @@ bool _pyAlgorithm::Addition2Creation( const Handle(_pyCommand)& theCmd, //================================================================================ /*! * \brief Return starting position of a part of python command - * \param thePartIndex - The index of command part - * \retval int - Part position + * \param thePartIndex - The index of command part + * \retval int - Part position */ //================================================================================ @@ -3562,8 +3562,8 @@ int _pyCommand::GetBegPos( int thePartIndex ) const //================================================================================ /*! * \brief Store starting position of a part of python command - * \param thePartIndex - The index of command part - * \param thePosition - Part position + * \param thePartIndex - The index of command part + * \param thePosition - Part position */ //================================================================================ @@ -3578,7 +3578,7 @@ void _pyCommand::SetBegPos( int thePartIndex, int thePosition ) //================================================================================ /*! * \brief Returns whitespace symbols at the line beginning - * \retval TCollection_AsciiString - result + * \retval TCollection_AsciiString - result */ //================================================================================ @@ -3595,7 +3595,7 @@ TCollection_AsciiString _pyCommand::GetIndentation() //================================================================================ /*! * \brief Return substring of python command looking like ResultValue = Obj.Meth() - * \retval const TCollection_AsciiString & - ResultValue substring + * \retval const TCollection_AsciiString & - ResultValue substring */ //================================================================================ @@ -3735,7 +3735,7 @@ const TCollection_AsciiString & _pyCommand::GetObject() //================================================================================ /*! * \brief Return substring of python command looking like ResVal = Obj.Method() - * \retval const TCollection_AsciiString & - Method substring + * \retval const TCollection_AsciiString & - Method substring */ //================================================================================ @@ -3778,7 +3778,7 @@ bool _pyCommand::IsMethodCall() //================================================================================ /*! * \brief Return substring of python command looking like ResVal = Obj.Meth(Arg1,...) - * \retval const TCollection_AsciiString & - Arg substring + * \retval const TCollection_AsciiString & - Arg substring */ //================================================================================ @@ -3879,8 +3879,8 @@ int _pyCommand::GetArgBeginning() const //================================================================================ /*! * \brief Check if char is a word part - * \param c - The character to check - * \retval bool - The check result + * \param c - The character to check + * \retval bool - The check result */ //================================================================================ @@ -3893,10 +3893,10 @@ static inline bool isWord(const char c, const bool dotIsWord) //================================================================================ /*! * \brief Looks for a word in the string and returns word's beginning - * \param theString - The input string - * \param theStartPos - The position to start the search, returning word's beginning - * \param theForward - The search direction - * \retval TCollection_AsciiString - The found word + * \param theString - The input string + * \param theStartPos - The position to start the search, returning word's beginning + * \param theForward - The search direction + * \retval TCollection_AsciiString - The found word */ //================================================================================ @@ -4027,9 +4027,9 @@ std::list< _pyID > _pyCommand::GetStudyEntries( const TCollection_AsciiString& s //================================================================================ /*! * \brief Look for position where not space char is - * \param theString - The string - * \param thePos - The position to search from and which returns result - * \retval bool - false if there are only space after thePos in theString + * \param theString - The string + * \param thePos - The position to search from and which returns result + * \retval bool - false if there are only space after thePos in theString */ //================================================================================ @@ -4047,14 +4047,14 @@ bool _pyCommand::SkipSpaces( const TCollection_AsciiString & theString, int & th //================================================================================ /*! * \brief Modify a part of the command - * \param thePartIndex - The index of the part - * \param thePart - The new part string - * \param theOldPart - The old part + * \param thePartIndex - The index of the part + * \param thePart - The new part string + * \param theOldPart - The old part */ //================================================================================ void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePart, - TCollection_AsciiString& theOldPart) + TCollection_AsciiString& theOldPart) { int pos = GetBegPos( thePartIndex ); if ( pos <= Length() && theOldPart != thePart) @@ -4087,8 +4087,8 @@ void _pyCommand::SetPart(int thePartIndex, const TCollection_AsciiString& thePar //================================================================================ /*! * \brief Set agrument - * \param index - The argument index, it counts from 1 - * \param theArg - The argument string + * \param index - The argument index, it counts from 1 + * \param theArg - The argument string */ //================================================================================ @@ -4189,9 +4189,9 @@ bool _pyCommand::SetDependentCmdsAfter() const //================================================================================ /*! * \brief Insert accessor method after theObjectID - * \param theObjectID - id of the accessed object - * \param theAcsMethod - name of the method giving access to the object - * \retval bool - false if theObjectID is not found in the command string + * \param theObjectID - id of the accessed object + * \param theAcsMethod - name of the method giving access to the object + * \retval bool - false if theObjectID is not found in the command string */ //================================================================================ @@ -4279,7 +4279,7 @@ void _pyObject::ClearCommands() //================================================================================ /*! * \brief Return method name giving access to an interaface object wrapped by python class - * \retval const char* - method name + * \retval const char* - method name */ //================================================================================ @@ -4411,39 +4411,39 @@ _pySubMesh::_pySubMesh(const Handle(_pyCommand)& theCreationCmd, bool toKeepAgrC bool _pySubMesh::CanBeArgOfMethod(const _AString& theMethodName) { return false; -// // names of all methods where a sub-mesh can be used as argument -// static TStringSet methods; -// if ( methods.empty() ) { -// const char * names[] = { -// // methods of SMESH_Gen -// "CopyMesh", -// // methods of SMESH_Group -// "AddFrom", -// // methods of SMESH_Measurements -// "MinDistance", -// // methods of SMESH_Mesh -// "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL", -// "RemoveSubMesh", -// // methods of SMESH_MeshEditor -// "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject", -// "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject", -// "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D", -// "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups", -// "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D", -// "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D", -// "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups", -// "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups", -// "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups", -// "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject", -// "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale", -// "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh", -// "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart", -// "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint", -// "MakeBoundaryMesh","Create0DElementsOnAllNodes", -// "" }; // <- mark of end -// methods.Insert( names ); -// } -// return methods.Contains( theMethodName ); + // names of all methods where a sub-mesh can be used as argument + // static TStringSet methods; + // if ( methods.empty() ) { + // const char * names[] = { + // // methods of SMESH_Gen + // "CopyMesh", + // // methods of SMESH_Group + // "AddFrom", + // // methods of SMESH_Measurements + // "MinDistance", + // // methods of SMESH_Mesh + // "ExportPartToMED","ExportCGNS","ExportPartToDAT","ExportPartToUNV","ExportPartToSTL", + // "RemoveSubMesh", + // // methods of SMESH_MeshEditor + // "ReorientObject","Reorient2D","TriToQuadObject","QuadToTriObject","SplitQuadObject", + // "SplitVolumesIntoTetra","SmoothObject","SmoothParametricObject","ConvertFromQuadraticObject", + // "RotationSweepObject","RotationSweepObjectMakeGroups","RotationSweepObject1D", + // "RotationSweepObject1DMakeGroups","RotationSweepObject2D","RotationSweepObject2DMakeGroups", + // "ExtrusionSweepObject","ExtrusionSweepObjectMakeGroups","ExtrusionSweepObject0D", + // "ExtrusionSweepObject0DMakeGroups","ExtrusionSweepObject1D","ExtrusionSweepObject2D", + // "ExtrusionSweepObject1DMakeGroups","ExtrusionSweepObject2DMakeGroups", + // "ExtrusionAlongPathObjX","ExtrusionAlongPathObject","ExtrusionAlongPathObjectMakeGroups", + // "ExtrusionAlongPathObject1D","ExtrusionAlongPathObject1DMakeGroups", + // "ExtrusionAlongPathObject2D","ExtrusionAlongPathObject2DMakeGroups","MirrorObject", + // "MirrorObjectMakeGroups","MirrorObjectMakeMesh","TranslateObject","Scale", + // "TranslateObjectMakeGroups","TranslateObjectMakeMesh","ScaleMakeGroups","ScaleMakeMesh", + // "RotateObject","RotateObjectMakeGroups","RotateObjectMakeMesh","FindCoincidentNodesOnPart", + // "FindCoincidentNodesOnPartBut","FindEqualElements","FindAmongElementsByPoint", + // "MakeBoundaryMesh","Create0DElementsOnAllNodes", + // "" }; // <- mark of end + // methods.Insert( names ); + // } + // return methods.Contains( theMethodName ); } //================================================================================ @@ -4510,13 +4510,13 @@ _pyGroup::_pyGroup(const Handle(_pyCommand)& theCreationCmd, const _pyID & id) //} //else { // ------------------------->>>>> GroupOnGeom( geom, name, typ ) - _pyID type = theCreationCmd->GetArg( 1 ); - _pyID name = theCreationCmd->GetArg( 2 ); - theCreationCmd->SetMethod( "GroupOnGeom" ); - theCreationCmd->RemoveArgs(); - theCreationCmd->SetArg( 1, geom ); - theCreationCmd->SetArg( 2, name ); - theCreationCmd->SetArg( 3, type ); + _pyID type = theCreationCmd->GetArg( 1 ); + _pyID name = theCreationCmd->GetArg( 2 ); + theCreationCmd->SetMethod( "GroupOnGeom" ); + theCreationCmd->RemoveArgs(); + theCreationCmd->SetArg( 1, geom ); + theCreationCmd->SetArg( 2, name ); + theCreationCmd->SetArg( 3, type ); //} } else if ( method == "CreateGroupFromFilter" ) diff --git a/src/SMESH_I/SMESH_Filter_i.cxx b/src/SMESH_I/SMESH_Filter_i.cxx index 3ae548024..2ec349564 100644 --- a/src/SMESH_I/SMESH_Filter_i.cxx +++ b/src/SMESH_I/SMESH_Filter_i.cxx @@ -3489,7 +3489,7 @@ static inline LDOMString toString( CORBA::Long theType ) case FT_LogicalOR : return "Or"; case FT_GroupColor : return "Color of Group"; case FT_LinearOrQuadratic : return "Linear or Quadratic"; - case FT_ElemGeomType : return "Element geomtry type"; + case FT_ElemGeomType : return "Element geometry type"; case FT_EntityType : return "Entity type"; case FT_Undefined : return ""; default : return ""; @@ -3544,7 +3544,7 @@ static inline SMESH::FunctorType toFunctorType( const LDOMString& theStr ) else if ( theStr.equals( "Or" ) ) return FT_LogicalOR; else if ( theStr.equals( "Color of Group" ) ) return FT_GroupColor; else if ( theStr.equals( "Linear or Quadratic" ) ) return FT_LinearOrQuadratic; - else if ( theStr.equals( "Element geomtry type" ) ) return FT_ElemGeomType; + else if ( theStr.equals( "Element geometry type" ) ) return FT_ElemGeomType; else if ( theStr.equals( "Entity type" ) ) return FT_EntityType; else if ( theStr.equals( "" ) ) return FT_Undefined; else return FT_Undefined; diff --git a/src/SMESH_SWIG/smeshBuilder.py b/src/SMESH_SWIG/smeshBuilder.py index 24aaad3b8..3d4dcf599 100644 --- a/src/SMESH_SWIG/smeshBuilder.py +++ b/src/SMESH_SWIG/smeshBuilder.py @@ -3249,7 +3249,7 @@ class Mesh: # Type SMESH.FunctorType._items in the Python Console to see all items. # Note that not all items correspond to numerical functors. # @param MaxAngle is the maximum angle between element normals at which the fusion - # is still performed; theMaxAngle is mesured in radians. + # is still performed; theMaxAngle is measured in radians. # Also it could be a name of variable which defines angle in degrees. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_unitetri @@ -3268,7 +3268,7 @@ class Mesh: # Type SMESH.FunctorType._items in the Python Console to see all items. # Note that not all items correspond to numerical functors. # @param MaxAngle a max angle between element normals at which the fusion - # is still performed; theMaxAngle is mesured in radians. + # is still performed; theMaxAngle is measured in radians. # @return TRUE in case of success, FALSE otherwise. # @ingroup l2_modif_unitetri def TriToQuadObject (self, theObject, theCriterion, MaxAngle): diff --git a/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx index 12ae7326f..2824be8cc 100644 --- a/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx +++ b/src/StdMeshers/StdMeshers_HexaFromSkin_3D.cxx @@ -588,7 +588,7 @@ namespace const SMDS_MeshElement* cornerQuad, const SMDS_MeshNode* nCorner) { - // Find out size of block side mesured in nodes and by the way find two rows + // Find out size of block side measured in nodes and by the way find two rows // of nodes in two directions. int x, y, nbX, nbY; diff --git a/src/Tools/MacMesh/MacMesh/PublishGroups.py b/src/Tools/MacMesh/MacMesh/PublishGroups.py index 31f2b7329..a5d363c14 100644 --- a/src/Tools/MacMesh/MacMesh/PublishGroups.py +++ b/src/Tools/MacMesh/MacMesh/PublishGroups.py @@ -97,7 +97,7 @@ def Publish (ObjToPublish): def RevolveMesh(MainMesh,**args): """ - This function premits to revolute and scale a 2D mesh while transforming the edge + This function permits to revolute and scale a 2D mesh while transforming the edge groups into face groups. Moreover, the function automatically creates the face groups corresponding to the symmetry lower and upper faces Facultatif arguments are : @@ -171,7 +171,7 @@ def RevolveMesh(MainMesh,**args): def ExtrudeMesh(MainMesh,**args): """ - This function premits to extrude and scale a 2D mesh while transforming the edge + This function permits to extrude and scale a 2D mesh while transforming the edge groups into face groups. Moreover, the function automatically creates the face groups corresponding to the symmetry lower and upper faces Facultatif arguments are : diff --git a/src/Tools/MeshCut/MeshCut_Maillage.cxx b/src/Tools/MeshCut/MeshCut_Maillage.cxx index de5a5b036..ed48c6717 100644 --- a/src/Tools/MeshCut/MeshCut_Maillage.cxx +++ b/src/Tools/MeshCut/MeshCut_Maillage.cxx @@ -324,7 +324,7 @@ void Maillage::inputMED(std::string fichierMED) // Lecture des infos concernant le premier maillage if (MEDmeshInfo(fid, 1, maa, &spacedim, &mdim, &type, desc, dtunit, &sortingtype, &nPasTemps, &axistype, axisname, unitname) < 0) - ERREUR("Error while reading mesh informations "); + ERREUR("Error while reading mesh information "); //cout << chrono() << " --- inputMED: MEDmeshInfo: OK" << endl; // cerr << "maa=" << maa << endl; diff --git a/src/Tools/YamsPlug/doc/Generics_params.rst b/src/Tools/YamsPlug/doc/Generics_params.rst index a38e68289..29453af2e 100644 --- a/src/Tools/YamsPlug/doc/Generics_params.rst +++ b/src/Tools/YamsPlug/doc/Generics_params.rst @@ -15,7 +15,7 @@ You usually don't have to set this parameter but you can choose to limit the amo - **File** -You can change the file used to store remeshing hypotheses, see :ref:`hypothesis-label` for further informations. +You can change the file used to store remeshing hypotheses, see :ref:`hypothesis-label` for further information. .. image:: images/Generic.png :align: center