/*!

\page double_nodes_page Duplicate Nodes or/and Elements

\n This operation allows to duplicate nodes or/and elements of your mesh.
Duplication of nodes can be useful to emulate a crack in the model.
Duplication consists in creation of mesh element "equal" to existing ones.

<em>To duplicate nodes or/and elements:</em>
<ol>
<li>From the \b Modification menu choose \b Transformation -> <b> Duplicate
 Nodes or/and Elements </b> item or click <em>"Duplicate Nodes or/and
 Elements"</em> button in the toolbar.
<br>
\image html duplicate_nodes.png "Duplicate Nodes or/and Elements button"
</li>
<li>Check in the dialog box one of three radio buttons corresponding to
  the type of duplication operation you would like to perform.</li>
<li>Fill the other fields available in the dialog box (depending on
  the chosen operation mode).</li>
<li>Click the \b Apply or <b>Apply and Close</b> button to perform the
  operation of duplication.</li> 
</ol>

\n "Duplicate Nodes or/and Elements" dialog has three working modes:
<ul>
<li>\ref mode_without_elem_anchor "Duplicate nodes only"</li>
<li>\ref mode_with_elem_anchor "Duplicate nodes and border elements"</li>
<li>\ref mode_elem_only_anchor "Duplicate elements only"</li>
</ul>

<br>
\anchor mode_without_elem_anchor
<h2>Duplicate nodes only</h2>

In this mode the dialog looks like:

\image html duplicate01.png

Parameters to be defined in this mode:
<ul>
<li><b>Group of nodes to duplicate</b> (<em>mandatory</em>): these
  nodes will be duplicated.</li>
<li><b>Group of elements to replace nodes with new ones</b>
  (<em>optional</em>): the new nodes will replace the nodes to
  duplicate within these elements.</li> 
<li><b>Construct group with newly created nodes</b> option
  (<em>checked by default</em>): if checked - the group with just
  created nodes will be built.</li> 
</ul>
A schema below explains the crack emulation using the node duplication.
\image html crack_emulation_double_nodes.png "Crack emulation"
This schema shows a virtual crack in a 2D mesh created using this duplication
mode. In this schema:
- Black balls are <b>nodes to duplicate</b>.
- Red balls are <b>new nodes</b>.
- <b>Elements to replace nodes with new ones</b> are marked with green.

Note that in reality <b>nodes to duplicate</b> coincide with <b>new nodes</b>.


<br>
\anchor mode_with_elem_anchor
<h2>Duplicate nodes and border elements</h2>

In this mode the dialog looks like:

\image html duplicate02.png

Parameters to be defined in this mode:
<ul>
<li><b>Group of elements to duplicate</b> (<em>mandatory</em>): these
  elements will be duplicated.</li> 
<li><b>Group of nodes not to duplicate</b> (<em>optional</em>):
  group of nodes at crack bottom which will not be duplicated.</li>
<li><b>Group of elements to replace nodes with new ones</b>
  (<em>mandatory</em>): the new nodes will replace the nodes to
  duplicate within these elements.</li> 
<li><b>Construct group with newly created elements</b> option
 (<em>checked by default</em>): if checked - the group of just created
 elements will be built.</li>
<li><b>Construct group with newly created nodes</b> option
  (<em>checked by default</em>): if checked - the group of just
  created nodes will be built.</li>
</ul>

A schema below explains the crack emulation using the node duplication
with border elements.
\image html crack_emulation_double_nodes_with_elems.png "Crack emulation"
This schema shows a virtual crack in a 2D mesh created using this duplication
mode. In this schema:
- Black segments are <b>elements to duplicate</b> (edges in 2D case).
- Black balls (except the lowest one) are nodes of <b>elements to
  duplicate</b> that are duplicated.
- The lowest black ball is a <b>node not to duplicate</b>.
- Red balls are <b>creates nodes</b>.
- Red segments are <b>created elements</b> (edges).
- <b>Elements to replace nodes with new ones</b> are marked with green.

Note that in reality <b>nodes to duplicate</b> coincide with <b>new nodes</b>.
<br>
In a 3D case, where <b>elements to duplicate</b> are faces, the edges
located at the "crack" (if any) are cloned automatically.

<br>
\anchor mode_elem_only_anchor
<h2>Duplicate elements only</h2>

This mode just duplicates given elements, i.e. creates new elements on
the same nodes as the given elements.
<br>
In this mode the dialog looks like:

\image html duplicate03.png

Parameters to be defined in this mode:
<ul>
<li><b>Group of elements to duplicate</b> (<em>mandatory</em>): these
  elements will be duplicated.</li> 
<li><b>Construct group with newly created elements</b> option
  (<em>checked by default</em>): if checked - the group of just created
  elements will be built. A name of the created group starts from
  "DoubleElements".</li>
</ul>


<br><b>See Also</b> a sample TUI Script of a
 \ref tui_duplicate_nodes "Duplicate nodes or/and elements" operation.

*/