// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS // // This library is free software; you can redistribute it and/or // modify it under the terms of the GNU Lesser General Public // License as published by the Free Software Foundation; either // version 2.1 of the License. // // This library is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU // Lesser General Public License for more details. // // You should have received a copy of the GNU Lesser General Public // License along with this library; if not, write to the Free Software // Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA // // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com // // // // File : SMESH_BasicHypothesis.idl // Author : Paul RASCLE, EDF #ifndef _SMESH_BASICHYPOTHESIS_IDL_ #define _SMESH_BASICHYPOTHESIS_IDL_ #include "SALOME_Exception.idl" #include "SMESH_Hypothesis.idl" #include "SMESH_Mesh.idl" /*! * StdMeshers: interfaces to standard hypotheses and algorithms */ module StdMeshers { /*! * StdMeshers_LocalLength: interface of "Average length" hypothesis */ interface StdMeshers_LocalLength : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetLength(in double length) raises (SALOME::SALOME_Exception); /*! * Sets parameter value * * Precision parameter is used to allow rounding a number of segments, * calculated from the edge length and average length of segment, * to the lower integer, if this value outstands from it in bounds of the precision. * Otherwise, the number of segments is rounded to the higher integer. * Use value 0.5 to provide rounding to the nearest integer, * 1.0 for the lower integer, 0.0 for the higher integer. * Default value is 1e-07. In old studies, restored from file, * this value will be set to zero, what corresponds to the old behaviour. */ void SetPrecision(in double precision) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetLength(); /*! * Returns parameter value */ double GetPrecision(); }; /*! * StdMeshers_MaxLength: interface of "Max length" hypothesis */ interface StdMeshers_MaxLength : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetLength(in double length) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetLength(); /*! * Returns true if preestemated length is defined */ boolean HavePreestimatedLength(); /*! * Returns preestemated length */ double GetPreestimatedLength(); /*! * Sets preestemated length */ void SetPreestimatedLength(in double length); /*! * Sets boolean parameter enabling/desabling usage of length computed * basing on size of bounding box of shape to mesh */ void SetUsePreestimatedLength(in boolean toUse); /*! * Returns value of boolean parameter enabling/desabling usage of length computed * basing on size of bounding box of shape to mesh */ boolean GetUsePreestimatedLength(); }; /*! * StdMeshers_AutomaticLength: interface of "Automatic length" hypothesis */ interface StdMeshers_AutomaticLength : SMESH::SMESH_Hypothesis { /*! * Sets Fineness parameter value */ void SetFineness(in double theFineness) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetFineness(); }; /*! * StdMeshers_NumberOfSegments: interface of "Nb. Segments" hypothesis */ interface StdMeshers_NumberOfSegments : SMESH::SMESH_Hypothesis { /*! * Builds and returns point distribution according to passed density function */ SMESH::double_array BuildDistributionExpr( in string func, in long nbSeg, in long conv ) raises (SALOME::SALOME_Exception); SMESH::double_array BuildDistributionTab( in SMESH::double_array func, in long nbSeg, in long conv ) raises (SALOME::SALOME_Exception); /*! * Sets parameter value */ void SetNumberOfSegments(in long segmentsNumber) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ long GetNumberOfSegments(); /*! * Sets parameter value */ void SetDistrType(in long typ) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ long GetDistrType(); /*! * Sets parameter value */ void SetScaleFactor(in double scaleFactor) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetScaleFactor() raises (SALOME::SALOME_Exception); /*! * Sets parameter value for distribution DT_TabFunc */ void SetTableFunction(in SMESH::double_array table) raises (SALOME::SALOME_Exception); /*! * Returns
parameter value for distribution DT_TabFunc */ SMESH::double_array GetTableFunction() raises (SALOME::SALOME_Exception); /*! * Sets parameter value for distribution DT_ExprFunc */ void SetExpressionFunction(in string expr) raises (SALOME::SALOME_Exception); /*! * Returns parameter value for distribution DT_ExprFunc */ string GetExpressionFunction() raises (SALOME::SALOME_Exception); /*! * Sets parameter value for functional distributions */ void SetConversionMode(in long conv ) raises (SALOME::SALOME_Exception); /*! * Returns parameter value for functional distributions */ long ConversionMode() raises (SALOME::SALOME_Exception); }; /*! * StdMeshers_Arithmetic1D: interface of "Arithmetic 1D" hypothesis */ interface StdMeshers_Arithmetic1D : SMESH::SMESH_Hypothesis { /*! * Sets or parameter value */ void SetLength(in double length, in boolean isStartLength) raises (SALOME::SALOME_Exception); /*! * Returns or parameter value */ double GetLength(in boolean isStartLength); }; /*! * StdMeshers_MaxElementArea: interface of "Max. Triangle Area" hypothesis */ interface StdMeshers_MaxElementArea : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetMaxElementArea(in double area) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetMaxElementArea(); }; /*! * StdMeshers_LengthFromEdges: interface of "Length From Edges (2D Hyp. for Triangulator)" hypothesis */ interface StdMeshers_LengthFromEdges : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetMode(in long mode) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ long GetMode(); }; /*! * StdMeshers_StartEndLength: interface of "Start and End Length" hypothesis */ interface StdMeshers_StartEndLength : SMESH::SMESH_Hypothesis { /*! * Sets or parameter value */ void SetLength(in double length, in boolean isStartLength) raises (SALOME::SALOME_Exception); /*! * Returns or parameter value */ double GetLength(in boolean isStartLength); }; /*! * StdMeshers_Deflection1D: interface of "Deflection 1D" hypothesis */ interface StdMeshers_Deflection1D : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetDeflection(in double deflection) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetDeflection(); }; /*! * StdMeshers_MaxElementVolume: interface of "Max. Hexahedron or Tetrahedron Volume" hypothesis */ interface StdMeshers_MaxElementVolume : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetMaxElementVolume(in double volume) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetMaxElementVolume(); }; /*! * StdMeshers_NotConformAllowed: interface of "Not Conform Mesh Allowed" hypothesis. * Presence of this hypothesis permits to algorithm generation of not conform mesh. */ interface StdMeshers_NotConformAllowed : SMESH::SMESH_Hypothesis { }; /*! * StdMeshers_Propagation: interface of "Propagation" hypothesis. * Presence of this hypothesis on any edge propagates any other 1D * hypothesis from this edge on all edges, opposite to it. * It concerns only edges of quadrangle faces. */ interface StdMeshers_Propagation : SMESH::SMESH_Hypothesis { }; /*! * StdMeshers_QuadranglePreference: interface of "QuadranglePreference" hypothesis. * This hypothesis is used by StdMeshers_Quadrangle_2D algorithm. * Presence of this hypothesis forces construction of quadrangles if the number * of nodes on opposite edges is not the same in the case where the global number * of nodes on edges is even */ interface StdMeshers_QuadranglePreference : SMESH::SMESH_Hypothesis { }; /*! * StdMeshers_TrianglePreference: interface of "TrianglePreference" hypothesis. * This hypothesis is used by StdMeshers_Quadrangle_2D algorithm. * Presence of this hypothesis forces construction of triangles in the refinement * area if the number of nodes on opposite edges is not the same. */ interface StdMeshers_TrianglePreference : SMESH::SMESH_Hypothesis { }; /*! * StdMeshers_QuadraticMesh: interface of "QuadraticMesh" hypothesis. * This is an auxiliary 1D hypothesis whose presence forces construction * of quadratic edges. * If the 2D mesher sees that all boundary edges are quadratic ones, * it generates quadratic faces, else it generates linear faces using * medium nodes as if they were vertex ones. * The 3D mesher generates quadratic volumes only if all boundary faces * are quadratic ones, else it fails. */ interface StdMeshers_QuadraticMesh : SMESH::SMESH_Hypothesis { }; /*! * StdMeshers_NumberOfLayers: interface of "Nb. Layers" hypothesis. * This hypothesis is used by "Radial prism" algorithm. * It specifies number of segments between the internal * and the external surfaces. */ interface StdMeshers_NumberOfLayers : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetNumberOfLayers(in long numberOfLayers) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ long GetNumberOfLayers(); }; /*! * StdMeshers_LayerDistribution: interface of "Distribution of Layers" hypothesis. * This hypothesis is used by "Radial prism" algorithm. * It specifies 1D hypothesis defining distribution of segments between the internal * and the external surfaces. */ interface StdMeshers_LayerDistribution : SMESH::SMESH_Hypothesis { /*! * Sets 1D hypothesis specifying distribution of layers */ void SetLayerDistribution(in SMESH::SMESH_Hypothesis distributionHyp) raises (SALOME::SALOME_Exception); /*! * Returns 1D hypothesis specifying distribution of layers */ SMESH::SMESH_Hypothesis GetLayerDistribution(); }; /*! * interface of "ProjectionSource1D" hypothesis. * This hypothesis specifies a meshed edge to take a mesh pattern from * and optionally association of vertices between the source edge and a * target one (where a hipothesis is assigned to) */ interface StdMeshers_ProjectionSource1D : SMESH::SMESH_Hypothesis { /*! * Sets source to take a mesh pattern from */ void SetSourceEdge(in GEOM::GEOM_Object edge) raises (SALOME::SALOME_Exception); /*! * Returns the source edge */ GEOM::GEOM_Object GetSourceEdge(); /*! * Sets source to take a mesh pattern from */ void SetSourceMesh(in SMESH::SMESH_Mesh mesh); /*! * Return source mesh */ SMESH::SMESH_Mesh GetSourceMesh(); /*! * Sets vertex association between the source edge and the target one. * This parameter is optional */ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex, in GEOM::GEOM_Object targetVertex) raises (SALOME::SALOME_Exception); /*! * Returns the vertex associated with the target vertex. * Result may be nil if association not set */ GEOM::GEOM_Object GetSourceVertex(); /*! * Returns the vertex associated with the source vertex. * Result may be nil if association not set */ GEOM::GEOM_Object GetTargetVertex(); }; /*! * interface of "ProjectionSource2D" hypothesis. * This hypothesis specifies a meshed face to take a mesh pattern from * and optionally association of vertices between the source face and a * target one (where a hipothesis is assigned to) */ interface StdMeshers_ProjectionSource2D : SMESH::SMESH_Hypothesis { /*! * Sets a source to take a mesh pattern from */ void SetSourceFace(in GEOM::GEOM_Object face) raises (SALOME::SALOME_Exception); /*! * Returns the source face */ GEOM::GEOM_Object GetSourceFace(); /*! * Sets source to take a mesh pattern from */ void SetSourceMesh(in SMESH::SMESH_Mesh mesh); /*! * Return source mesh */ SMESH::SMESH_Mesh GetSourceMesh(); /*! * Sets vertex association between the source face and the target one. * This parameter is optional. * Two vertices must belong to one edge of a face */ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1, in GEOM::GEOM_Object sourceVertex2, in GEOM::GEOM_Object targetVertex1, in GEOM::GEOM_Object targetVertex2) raises (SALOME::SALOME_Exception); /*! * Returns the -th source vertex associated with the -th target vertex. * Result may be nil if association not set. * Valid indices are 1 and 2 */ GEOM::GEOM_Object GetSourceVertex(in long i) raises (SALOME::SALOME_Exception); /*! * Returns the -th target vertex associated with the -th source vertex. * Result may be nil if association not set. * Valid indices are 1 and 2 */ GEOM::GEOM_Object GetTargetVertex(in long i) raises (SALOME::SALOME_Exception); }; /*! * interface of "ProjectionSource3D" hypothesis. * This hypothesis specifies a meshed shell or solid to take a mesh pattern from * and optionally association of vertices between the source shape and a * target one (where a hipothesis is assigned to) */ interface StdMeshers_ProjectionSource3D : SMESH::SMESH_Hypothesis { /*! * Sets a source to take a mesh pattern from */ void SetSource3DShape(in GEOM::GEOM_Object shape) raises (SALOME::SALOME_Exception); /*! * Returns the source shape */ GEOM::GEOM_Object GetSource3DShape(); /*! * Sets source to take a mesh pattern from */ void SetSourceMesh(in SMESH::SMESH_Mesh mesh); /*! * Return source mesh */ SMESH::SMESH_Mesh GetSourceMesh(); /*! * Sets vertex association between the source shape and the target one. * This parameter is optional. * Two vertices must belong to one edge of a shape */ void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1, in GEOM::GEOM_Object sourceVertex2, in GEOM::GEOM_Object targetVertex1, in GEOM::GEOM_Object targetVertex2) raises (SALOME::SALOME_Exception); /*! * Returns the -th source vertex associated with the -th target vertex. * Result may be nil if association not set. * Valid indices are 1 and 2 */ GEOM::GEOM_Object GetSourceVertex(in long i) raises (SALOME::SALOME_Exception); /*! * Returns the -th target vertex associated with the -th source vertex. * Result may be nil if association not set. * Valid indices are 1 and 2 */ GEOM::GEOM_Object GetTargetVertex(in long i) raises (SALOME::SALOME_Exception); }; /*! * interface of "SegmentLengthAroundVertex" hypothesis. * This hypothesis specifies length of segments adjacent to the vertex the * hypothesis is assigned to */ interface StdMeshers_SegmentLengthAroundVertex : SMESH::SMESH_Hypothesis { /*! * Sets parameter value */ void SetLength(in double length) raises (SALOME::SALOME_Exception); /*! * Returns parameter value */ double GetLength(); }; /*! * StdMeshers_SegmentAroundVertex_0D: interface of "SegmentAroundVertex" algorithm */ interface StdMeshers_SegmentAroundVertex_0D : SMESH::SMESH_0D_Algo { }; /*! * StdMeshers_Regular_1D: interface of "Wire discretisation" algorithm */ interface StdMeshers_Regular_1D : SMESH::SMESH_1D_Algo { }; /*! * StdMeshers_CompositeSegment_1D: interface of "Composite side discretisation" algorithm */ interface StdMeshers_CompositeSegment_1D : SMESH::SMESH_1D_Algo { }; /*! * StdMeshers_MEFISTO_2D: interface of "Triangle (Mefisto)" algorithm */ interface StdMeshers_MEFISTO_2D : SMESH::SMESH_2D_Algo { }; /*! * StdMeshers_Quadrangle_2D: interface of "Quadrangle (Mapping)" algorithm */ interface StdMeshers_Quadrangle_2D : SMESH::SMESH_2D_Algo { }; /*! * StdMeshers_Hexa_3D: interface of "Hexahedron (i,j,k)" algorithm */ interface StdMeshers_Hexa_3D : SMESH::SMESH_3D_Algo { }; /*! * StdMeshers_Prism_3D: interface of "3D extrusion" algorithm */ interface StdMeshers_Prism_3D : SMESH::SMESH_3D_Algo { }; /*! * StdMeshers_RadialPrism_3D: interface of "Radial Prism" algorithm */ interface StdMeshers_RadialPrism_3D : SMESH::SMESH_3D_Algo { }; /*! * StdMeshers_Projection_3D: interface of "Projection 3D" algorithm */ interface StdMeshers_Projection_3D : SMESH::SMESH_3D_Algo { }; /*! * StdMeshers_Projection_2D: interface of "Projection 2D" algorithm */ interface StdMeshers_Projection_2D : SMESH::SMESH_2D_Algo { }; /*! * StdMeshers_Projection_1D: interface of "Projection 1D" algorithm */ interface StdMeshers_Projection_1D : SMESH::SMESH_1D_Algo { }; /*! * StdMeshers_UseExisting_2D: interface of "UseExisting 2D" algorithm * doing nothing to allow mesh generation by mesh edition functions in TUI mode */ interface StdMeshers_UseExisting_2D : SMESH::SMESH_2D_Algo { }; /*! * StdMeshers_UseExisting_1D: interface of "UseExisting 1D" algorithm * doing nothing to allow mesh generation by mesh edition functions in TUI mode */ interface StdMeshers_UseExisting_1D : SMESH::SMESH_1D_Algo { }; }; #endif