/*! \page introduction_to_mesh_page Introduction to MESH \n \b MESH module of SALOME is destined for: <ul> <li>\ref importing_exporting_meshes_page "import and export of meshes in MED format",</li> <li>\ref constructing_meshes_page "meshing geometrical models" previously created or imported by the GEOM component. MESH module allows to apply 1D, 2D, 3D meshing algorithms and a set of hypotheses: <ul> <li>\ref arithmetic_1d_anchor "Arithmetic 1D"</li> <li>\ref average_length_anchor "Average Length"</li> <li>\ref deflection_1d_anchor "Deflection 1D"</li> <li>\ref number_of_segments_anchor "Number of segments"</li> <li>\ref start_and_end_length_anchor "Start and end length"</li> <li>\ref automatic_length_anchor "Automatic Length"</li> <li>\ref max_element_area_anchor "Max Element Area"</li> <li>\ref length_from_edges_anchor "Length from Edges"</li> <li>\ref quadrangle_preference_anchor "Quadrangle Preference"</li> <li>\ref triangle_preference_anchor "Triangle Preference"</li> <li>\ref max_element_volume_hypo_page "Max Element Volume"</li> </ul> </li> <li>modification of locally generated meshes by <ul> <li>\ref adding_nodes_and_elements_page "Addition" of nodes and elements</li> <li>\ref removing_nodes_and_elements_page "Removal" of nodes and elements </li> </ul> </li> <li>\ref creating_groups_page "grouping mesh elements" and \ref using_operations_on_groups_page "performing operations on these groups"</li> <li>\ref about_quality_controls_page "quality control" of meshes basing on a set of definite criteria - <b>for edges:</b> <ul> <li>\ref length_page "Length of edges"</li> <li>\ref borders_at_multi_connection_page "Borders at multi-connection"</li> <li>\ref free_borders_page "Free borders"</li> </ul> <b>for faces:</b> <ul> <li>\ref area_page "Area"</li> <li>\ref free_edges_page "Free edges"</li> <li>\ref borders_at_multi_connection_2d_page "Borders at multi-connection 2D"</li> <li>\ref length_2d_page "Length 2D"</li> <li>\ref minimum_angle_page "Minimum angle"</li> <li>\ref taper_page "Taper"</li> <li>\ref aspect_ratio_page "Aspect Ratio"</li> <li>\ref warping_page "Warping"</li> <li>\ref skew_page "Skew"</li> </ul> <b>for solids:</b> <ul> <li>\ref aspect_ratio_3d_page "Aspect ratio 3D"</li> <li>\ref volume_page "Volume"</li> </ul> </li> </ul> \image html image7.jpg */