#  -*- coding: iso-8859-1 -*-
# Copyright (C) 2007-2022  CEA/DEN, EDF R&D, OPEN CASCADE
#
# Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#

# =======================================
#
import salome
salome.salome_init()
import GEOM
from salome.geom import geomBuilder
geompy = geomBuilder.New()

import SMESH, SALOMEDS
from salome.smesh import smeshBuilder
smesh =  smeshBuilder.New()

# Geometrie
# =========

# Construire avec des hexahedres une piece faite de 2 cylindres de diametre different
# et dont les axes se coupent orthogonalement, puis mailler.

# Valeurs
# -------

cx = 0
cy = 0
cz = 0

g_rayon   = 100.0
g_hauteur = 500

p_rayon   =  50.0
p_hauteur = 500

g_trim = 1000

# Gros cylindre
# -------------

cpd = []

g_base = geompy.MakeVertex(cx, cy, cz)
g_dir  = geompy.MakeVectorDXDYDZ(0, 0, 1)
t_hauteur = p_rayon+10.0

g_cyl = geompy.MakeCylinder(g_base, g_dir, g_rayon, g_hauteur)

g_coupe   = geompy.MakeVectorDXDYDZ(1, 0, 0)

g_tools = []
g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx+t_hauteur, cy, cz), g_coupe, g_trim))
g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur, cy, cz), g_coupe, g_trim))

g_partie = geompy.MakePartition([g_cyl], g_tools, [], [], geompy.ShapeType["SOLID"])
g_bas, g_centre, g_haut = geompy.SubShapeAllSorted(g_partie, geompy.ShapeType["SOLID"])

# Partie basse du gros cylindre
# -----------------------------

b_hauteur = 10
b_base    = 20

b_boite = geompy.MakeBox(cx-t_hauteur, cy-b_base, cz,  cx-t_hauteur-b_hauteur, cy+b_base, cz+g_hauteur)
cpd.append(b_boite)

b_cyl = geompy.MakeCut(g_bas, b_boite)

b_tools = []
b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy+b_base, cz), geompy.MakeVectorDXDYDZ( 1, 1, 0), g_trim))
b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy-b_base, cz), geompy.MakeVectorDXDYDZ(-1, 1, 0), g_trim))

b_partie = geompy.MakePartition([b_cyl], b_tools, [], [], geompy.ShapeType["SOLID"])
b_element = geompy.SubShapeAll(b_partie, geompy.ShapeType["SOLID"])
cpd = cpd + b_element

# Partie haute du gros cylindre
# -----------------------------

h_plan = geompy.MakePlane(g_base, g_coupe, g_trim)

cpd.append(geompy.MakeMirrorByPlane(b_boite, h_plan))

for h in b_element:
    h_symetrie = geompy.MakeMirrorByPlane(h, h_plan)
    cpd.append(h_symetrie)

# Petit cylindre
# --------------

z_arete = p_rayon/2
x_arete = z_arete*t_hauteur*2/g_hauteur

px = cx-x_arete
py = cy-1.5*g_rayon
pz = cz+g_hauteur/2

p_base = geompy.MakeVertex(cx, py, pz)
p_dir  = geompy.MakeVectorDXDYDZ(0, 1, 0)
p_cyl  = geompy.MakeCylinder(p_base, p_dir, p_rayon, p_hauteur)

p_boite = geompy.MakeBox(px, py, pz-z_arete,  cx+x_arete, py+p_hauteur, pz+z_arete)

# Partie interieure du petit cylindre
# -----------------------------------

i_cyl   = geompy.MakeCommon(p_cyl, g_cyl)
i_tuyau = geompy.MakeCut(i_cyl, p_boite)
i_boite = geompy.MakeCommon(p_boite, g_cyl)

# Partie exterieure du petit cylindre
# -----------------------------------

e_cyl0 = geompy.MakeCut(p_cyl, g_cyl)
e_cyl  = geompy.SubShapeAllSorted(e_cyl0, geompy.ShapeType["SOLID"])

e_tuyau = geompy.MakeCut(e_cyl[1], p_boite)

e_boite0 = geompy.MakeCut(p_boite, g_cyl)
e_boite  = geompy.SubShapeAllSorted(e_boite0, geompy.ShapeType["SOLID"])

cpd.append(e_boite[1])

# Partie centrale du gros cylindre
# --------------------------------

c_cyl = geompy.MakeCut(g_centre, p_cyl)

# Partitionner
# ------------

p_tools = []
p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz-z_arete), geompy.MakeVectorDXDYDZ(-z_arete, 0, x_arete), g_trim))
p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz+z_arete), geompy.MakeVectorDXDYDZ( z_arete, 0, x_arete), g_trim))

p_partie = geompy.MakePartition([e_tuyau], p_tools, [], [], geompy.ShapeType["SOLID"])
p_element = geompy.SubShapeAll(p_partie, geompy.ShapeType["SOLID"])
cpd = cpd + p_element

q_partie = geompy.MakePartition([i_tuyau, c_cyl], p_tools, [], [], geompy.ShapeType["SOLID"])
q_element = geompy.SubShapeAll(q_partie, geompy.ShapeType["SOLID"])

q_element = q_element + [i_boite]

q_tools = []
q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy-b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy+b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))

r_element = []
for e in q_element:
    r_partie = geompy.MakePartition([e], q_tools, [], [], geompy.ShapeType["SOLID"])
    r_element = r_element + geompy.SubShapeAll(r_partie, geompy.ShapeType["SOLID"])

cpd = cpd + r_element

# Compound
# --------

piece = geompy.RemoveExtraEdges(geompy.MakeCompound(cpd), True)

# Ajouter la piece dans l'etude
# -----------------------------

piece_id = geompy.addToStudy(piece, "ex15_cyl2geometry")

# Meshing
# =======

# Create a hexahedral mesh
# ------------------------

hexa = smesh.Mesh(piece, "ex15_cyl2geometry:hexa")

algo = hexa.Segment()
algo.NumberOfSegments(12)

hexa.Quadrangle()

hexa.Hexahedron()

# Mesh calculus
# -------------

hexa.Compute()

# Update object browser
# ---------------------

salome.sg.updateObjBrowser()