mirror of
https://git.salome-platform.org/gitpub/modules/smesh.git
synced 2024-11-15 01:58:35 +05:00
94 lines
4.0 KiB
ReStructuredText
94 lines
4.0 KiB
ReStructuredText
.. _prism_3d_algo_page:
|
|
|
|
******************************
|
|
Extrusion 3D meshing algorithm
|
|
******************************
|
|
|
|
Extrusion 3D algorithm can be used for meshing prisms, i.e. 3D shapes
|
|
defined by two opposing faces having the same number of vertices and
|
|
edges. These two faces should be connected by quadrangle "side" faces.
|
|
|
|
.. image:: ../images/prism_mesh.png
|
|
:align: center
|
|
|
|
.. centered::
|
|
Clipping view of a mesh of a prism with non-planar base and top faces
|
|
|
|
The prism is allowed to have sides composed of several faces. (A prism
|
|
side is a row of faces (or one face) connecting the corresponding edges of
|
|
the top and base faces). However, a prism
|
|
side can be split only vertically as indicated in the
|
|
picture below.
|
|
|
|
.. image:: ../images/prism_ok_ko.png
|
|
:align: center
|
|
|
|
.. centered::
|
|
A suitable and an unsuitable prism
|
|
|
|
In this picture, the left prism is suitable for meshing with 3D
|
|
extrusion algorithm: it has six sides, two of which are split
|
|
vertically. The right prism cannot be meshed with this
|
|
algorithm because one of the prism sides is split horizontally (the
|
|
splitting edge is highlighted).
|
|
|
|
The algorithm can propagate 2D mesh not only between horizontal
|
|
(i.e. base and top) faces of one prism but also between faces of prisms
|
|
organized in a stack and between stacks sharing prism sides.
|
|
|
|
.. _prism_stacks:
|
|
|
|
.. image:: ../images/prism_stack.png
|
|
:align: center
|
|
|
|
.. centered::
|
|
Prism stacks
|
|
|
|
This picture shows four neighboring prism stacks, each comprising two prisms.
|
|
The shown sub-mesh is used by the algorithm to mesh
|
|
all eight prisms in the stacks.
|
|
|
|
To use *Extrusion 3D* algorithm you need to assign algorithms
|
|
and hypotheses of lower dimensions as follows.
|
|
(A sample picture below shows algorithms and hypotheses used to
|
|
mesh a cylinder with prismatic volumes).
|
|
|
|
.. image:: ../images/prism_needs_hyps.png
|
|
:align: center
|
|
|
|
The **Global** algorithms and hypotheses to be chosen at
|
|
:ref:`create_mesh_anchor` are:
|
|
|
|
* 1D algorithm and hypothesis that will be applied for meshing (logically) vertical edges of the prism (which connect the top and the base faces of the prism). In the sample picture above these are "Regular_1D" algorithm and "Number of Segments" hypothesis named "Vertical Nb. Segments".
|
|
|
|
|
|
The **Local** algorithms and hypotheses to be chosen at
|
|
:ref:`constructing_submeshes_page` are:
|
|
|
|
* 1D and 2D algorithms and hypotheses that will be applied for meshing the top and the base prism :ref:`faces <submesh_shape_section>`. These faces can be meshed with any type of 2D elements: quadrangles, triangles, polygons or their mix. It is enough to define a sub-mesh on either the top or the base face. In the sample picture above, "NETGEN_1D2D" algorithm meshes "bottom disk" face with triangles. (1D algorithm is not assigned as "NETGEN_1D2D" does not require divided edges to create a 2D mesh.)
|
|
|
|
* Optionally you can define a 1D sub-mesh on some vertical :ref:`edges <submesh_shape_section>` of stacked prisms, which will override the global 1D hypothesis mentioned above. In the :ref:`Prism stacks <prism_stacks>` picture, the vertical division is not equidistant on the whole length because a "Number Of Segments" hypothesis with Scale Factor=3 is assigned to the highlighted edge.
|
|
|
|
|
|
If *Extrusion 3D* algorithm is assigned to a sub-mesh in a mesh
|
|
with multiple sub-meshes, the described above approach may not work as
|
|
expected. For example the bottom face may be meshed by other algorithm
|
|
before *Extrusion 3D* have a chance to project a mesh from the
|
|
base face. This thing can happen with vertical edges as well. All
|
|
these can lead to either a meshing failure or to an incorrect meshing.
|
|
In such a case, it's necessary to explicitly define algorithms
|
|
that *Extrusion 3D* implicitly applies in a simple case:
|
|
|
|
* assign :ref:`projection_1D2D` algorithm to the top face and
|
|
* assign a 1D algorithm to a group of all vertical edges.
|
|
|
|
.. image:: ../images/image157.gif
|
|
:align: center
|
|
|
|
.. centered::
|
|
Prism with Extrusion 3D meshing. Vertical division is different on neighbor edges because several local 1D hypotheses are assigned
|
|
|
|
**See Also** a sample TUI Script of :ref:`tui_prism_3d_algo`.
|
|
|
|
|