smesh/doc/salome/gui/SMESH/input/prism_3d_algo.doc
2013-04-18 07:58:41 +00:00

72 lines
3.1 KiB
Plaintext

/*!
\page prism_3d_algo_page 3D extrusion meshing algorithm
3D extrusion algorithm can be used for meshing prisms, i.e. 3D shapes
defined by two opposing faces having the same number of vertices and
edges. These two faces should be connected by quadrangle "side" faces.
The prism is allowed to have sides composed of several faces. (A prism
side is a row of faces (or one face) connecting the corresponding edges of
the top and base faces). However, a prism
side can be split only vertically as indicated in the
picture below.
\image html prism_ok_ko.png "A suitable and an unsuitable prism"
In this picture, the left prism is suitable for meshing with 3D
extrusion algorithm: it has six sides, two of which are split
vertically. The right prism cannot be meshed with this
algorithm because one of the prism sides is split horizontally (the
splitting edge is highlighted).
The algorithm can propagate 2D mesh not only between horizontal
(i.e. base and top) faces of one prism but also between faces of prisms
organized in a stack and between stacks sharing prism sides.
\image html prism_stack.png "Prism stacks"
This picture shows four neighboring prism stacks, each comprising two prisms.
The shown sub-mesh is used by the algorithm to mesh
all eight prisms in the stacks.
To use <em>3D extrusion</em> algorithm you need to assign algorithms
and hypotheses of lower dimensions as follows.
(A sample picture below shows algorithms and hypotheses used to
mesh a cylinder with prismatic volumes).
\image html prism_needs_hyps.png
The \b Global algorithms and hypotheses to be chosen at
\ref create_mesh_anchor "Creation of a mesh object" are:
<ul>
<li> 1D algorithm and hypothesis that will be applied for meshing
(logically) vertical edges of the prism (which connect the top and the
base faces of the prism). In the sample picture above these are
"Regular_1D" algorithm and "Nb. Segments_1" hypothesis.</li>
</ul>
The \b Local algorithms and hypotheses to be chosen at
\ref constructing_submeshes_page "Construction of sub-meshes" are:
<ul>
<li> 1D and 2D algorithms and hypotheses that will be applied for
meshing the top and the base prism faces. These faces can be meshed
with any type of 2D elements: quadrangles, triangles, polygons or
their mix. It is enough to define a sub-mesh on either the top or the base
face. In the sample picture above, "BLSURF" algorithm meshes
"Face_1" base surface with triangles. (1D algorithm is not
assigned as "BLSURF" does not require divided edges to create a 2D mesh.)
</li>
<li> Optionally you can define a 1D sub-mesh on some vertical edges
of stacked prisms, which will override the global 1D hypothesis mentioned
above. In the <b>Prism stacks</b> picture, the
vertical division is not equidistant on the whole length because
a "Number Of Segments" hypothesis with Scale Factor=3 is assigned to
the highlighted edge.
</li></ul>
\image html image157.gif "Prism with 3D extrusion meshing. Vertical division is different on neighbor edges because several local 1D hypotheses are assigned."
\sa a sample TUI Script of
\ref tui_prism_3d_algo "Use 3D extrusion meshing algorithm".
*/