smesh/test/ex15_cyl2geometry.py
2024-01-20 14:16:41 +00:00

211 lines
5.9 KiB
Python

# -*- coding: iso-8859-1 -*-
# Copyright (C) 2007-2024 CEA, EDF, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# Lesser General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public
# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
# =======================================
#
import salome
salome.salome_init()
import GEOM
from salome.geom import geomBuilder
geompy = geomBuilder.New()
import SMESH, SALOMEDS
from salome.smesh import smeshBuilder
smesh = smeshBuilder.New()
# Geometrie
# =========
# Construire avec des hexahedres une piece faite de 2 cylindres de diametre different
# et dont les axes se coupent orthogonalement, puis mailler.
# Valeurs
# -------
cx = 0
cy = 0
cz = 0
g_rayon = 100.0
g_hauteur = 500
p_rayon = 50.0
p_hauteur = 500
g_trim = 1000
# Gros cylindre
# -------------
cpd = []
g_base = geompy.MakeVertex(cx, cy, cz)
g_dir = geompy.MakeVectorDXDYDZ(0, 0, 1)
t_hauteur = p_rayon+10.0
g_cyl = geompy.MakeCylinder(g_base, g_dir, g_rayon, g_hauteur)
g_coupe = geompy.MakeVectorDXDYDZ(1, 0, 0)
g_tools = []
g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx+t_hauteur, cy, cz), g_coupe, g_trim))
g_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur, cy, cz), g_coupe, g_trim))
g_partie = geompy.MakePartition([g_cyl], g_tools, [], [], geompy.ShapeType["SOLID"])
g_bas, g_centre, g_haut = geompy.SubShapeAllSorted(g_partie, geompy.ShapeType["SOLID"])
# Partie basse du gros cylindre
# -----------------------------
b_hauteur = 10
b_base = 20
b_boite = geompy.MakeBox(cx-t_hauteur, cy-b_base, cz, cx-t_hauteur-b_hauteur, cy+b_base, cz+g_hauteur)
cpd.append(b_boite)
b_cyl = geompy.MakeCut(g_bas, b_boite)
b_tools = []
b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy+b_base, cz), geompy.MakeVectorDXDYDZ( 1, 1, 0), g_trim))
b_tools.append(geompy.MakePlane(geompy.MakeVertex(cx-t_hauteur-b_hauteur, cy-b_base, cz), geompy.MakeVectorDXDYDZ(-1, 1, 0), g_trim))
b_partie = geompy.MakePartition([b_cyl], b_tools, [], [], geompy.ShapeType["SOLID"])
b_element = geompy.SubShapeAll(b_partie, geompy.ShapeType["SOLID"])
cpd = cpd + b_element
# Partie haute du gros cylindre
# -----------------------------
h_plan = geompy.MakePlane(g_base, g_coupe, g_trim)
cpd.append(geompy.MakeMirrorByPlane(b_boite, h_plan))
for h in b_element:
h_symetrie = geompy.MakeMirrorByPlane(h, h_plan)
cpd.append(h_symetrie)
# Petit cylindre
# --------------
z_arete = p_rayon/2
x_arete = z_arete*t_hauteur*2/g_hauteur
px = cx-x_arete
py = cy-1.5*g_rayon
pz = cz+g_hauteur/2
p_base = geompy.MakeVertex(cx, py, pz)
p_dir = geompy.MakeVectorDXDYDZ(0, 1, 0)
p_cyl = geompy.MakeCylinder(p_base, p_dir, p_rayon, p_hauteur)
p_boite = geompy.MakeBox(px, py, pz-z_arete, cx+x_arete, py+p_hauteur, pz+z_arete)
# Partie interieure du petit cylindre
# -----------------------------------
i_cyl = geompy.MakeCommon(p_cyl, g_cyl)
i_tuyau = geompy.MakeCut(i_cyl, p_boite)
i_boite = geompy.MakeCommon(p_boite, g_cyl)
# Partie exterieure du petit cylindre
# -----------------------------------
e_cyl0 = geompy.MakeCut(p_cyl, g_cyl)
e_cyl = geompy.SubShapeAllSorted(e_cyl0, geompy.ShapeType["SOLID"])
e_tuyau = geompy.MakeCut(e_cyl[1], p_boite)
e_boite0 = geompy.MakeCut(p_boite, g_cyl)
e_boite = geompy.SubShapeAllSorted(e_boite0, geompy.ShapeType["SOLID"])
cpd.append(e_boite[1])
# Partie centrale du gros cylindre
# --------------------------------
c_cyl = geompy.MakeCut(g_centre, p_cyl)
# Partitionner
# ------------
p_tools = []
p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz-z_arete), geompy.MakeVectorDXDYDZ(-z_arete, 0, x_arete), g_trim))
p_tools.append(geompy.MakePlane(geompy.MakeVertex(px, py, pz+z_arete), geompy.MakeVectorDXDYDZ( z_arete, 0, x_arete), g_trim))
p_partie = geompy.MakePartition([e_tuyau], p_tools, [], [], geompy.ShapeType["SOLID"])
p_element = geompy.SubShapeAll(p_partie, geompy.ShapeType["SOLID"])
cpd = cpd + p_element
q_partie = geompy.MakePartition([i_tuyau, c_cyl], p_tools, [], [], geompy.ShapeType["SOLID"])
q_element = geompy.SubShapeAll(q_partie, geompy.ShapeType["SOLID"])
q_element = q_element + [i_boite]
q_tools = []
q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy-b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
q_tools.append(geompy.MakePlane(geompy.MakeVertex(cx, cy+b_base, cz), geompy.MakeVectorDXDYDZ(0, 1, 0), g_trim))
r_element = []
for e in q_element:
r_partie = geompy.MakePartition([e], q_tools, [], [], geompy.ShapeType["SOLID"])
r_element = r_element + geompy.SubShapeAll(r_partie, geompy.ShapeType["SOLID"])
cpd = cpd + r_element
# Compound
# --------
piece = geompy.RemoveExtraEdges(geompy.MakeCompound(cpd), True)
# Ajouter la piece dans l'etude
# -----------------------------
piece_id = geompy.addToStudy(piece, "ex15_cyl2geometry")
# Meshing
# =======
# Create a hexahedral mesh
# ------------------------
hexa = smesh.Mesh(piece, "ex15_cyl2geometry:hexa")
algo = hexa.Segment()
algo.NumberOfSegments(12)
hexa.Quadrangle()
hexa.Hexahedron()
# Mesh calculus
# -------------
isDone = hexa.Compute()
if not isDone:
raise Exception("Error when computing Mesh")
# Update object browser
# ---------------------
salome.sg.updateObjBrowser()