mirror of
https://git.salome-platform.org/gitpub/modules/smesh.git
synced 2024-11-12 00:29:17 +05:00
102 lines
4.2 KiB
Plaintext
102 lines
4.2 KiB
Plaintext
/*!
|
|
|
|
\page a2d_meshing_hypo_page 2D Meshing Hypotheses
|
|
|
|
- \ref max_element_area_anchor "Max Element Area"
|
|
- \ref length_from_edges_anchor "Length from Edges"
|
|
- \ref hypo_quad_params_anchor "Quadrangle parameters"
|
|
|
|
\anchor max_element_area_anchor
|
|
<h2>Max Element Area</h2>
|
|
|
|
<b>Max Element Area</b> hypothesis is applied for meshing of faces
|
|
composing your geometrical object. Definition of this hypothesis
|
|
consists of setting the <b>maximum area</b> of mesh elements,
|
|
which will compose the mesh of these faces.
|
|
|
|
\image html a-maxelarea.png
|
|
|
|
\n
|
|
|
|
\image html max_el_area.png "In this example, Max. element area is very small compared to the 1D hypothesis"
|
|
|
|
<b>See Also</b> a sample TUI Script of a
|
|
\ref tui_max_element_area "Maximum Element Area" hypothesis operation.
|
|
|
|
\anchor length_from_edges_anchor
|
|
<h2>Length from Edges</h2>
|
|
|
|
<b>Length from edges</b> hypothesis builds 2D mesh elements having a
|
|
maximum linear size calculated as an average segment length for a wire
|
|
of a given face.
|
|
|
|
<b>See Also</b> a sample TUI Script of a
|
|
\ref tui_length_from_edges "Length from Edges" hypothesis operation.
|
|
|
|
\anchor hypo_quad_params_anchor
|
|
<h2>Quadrangle parameters</h2>
|
|
|
|
\image html hypo_quad_params_dialog.png "Quadrangle parameters creation/edition dialog"
|
|
|
|
<b>Quadrangle parameters</b> is a hypothesis for Quadrangle (Mapping).
|
|
|
|
<b>Base vertex</b> parameter allows using Quadrangle (Mapping)
|
|
algorithm for meshing of trilateral faces. In this case it is
|
|
necessary to select the vertex, which will be used as the fourth edge
|
|
(degenerated).
|
|
|
|
\image html hypo_quad_params_1.png "A face built from 3 edges"
|
|
|
|
\image html hypo_quad_params_res.png "The resulting mesh"
|
|
|
|
This parameter can be also used to mesh a segment of a circular face.
|
|
Please, consider that there is a limitation on the selection of the
|
|
vertex for the faces built with the angle > 180 degrees (see the picture).
|
|
|
|
\image html hypo_quad_params_2.png "3/4 of a circular face"
|
|
|
|
In this case, selection of a wrong vertex for the <b>Base vertex</b>
|
|
parameter will generate a wrong mesh. The picture below
|
|
shows the good (left) and the bad (right) results of meshing.
|
|
|
|
\image html hypo_quad_params_res_2.png "The resulting meshes"
|
|
|
|
<b>Type</b> parameter is used on faces with a different number of
|
|
segments on opposite sides to define the algorithm of transition
|
|
between them. The following types are available:
|
|
|
|
- <b>Standard</b> is the default case, when both triangles and quadrangles
|
|
are possible in the transition area along the finer meshed sides.
|
|
- <b>Triangle preference</b> forces building only triangles in the
|
|
transition area along the finer meshed sides.
|
|
\note This type corresponds to <b>Triangle Preference</b> additional hypothesis,
|
|
which is obsolete now.
|
|
- <b>Quadrangle preference</b> forces building only quadrangles in the
|
|
transition area along the finer meshed sides. This hypothesis has a
|
|
restriction: the total quantity of segments on all
|
|
four sides of the face must be even (divisible by 2).
|
|
\note This type corresponds to <b>Quadrangle Preference</b> additional hypothesis,
|
|
which is obsolete now.
|
|
- <b>Quadrangle preference (reversed)</b> works in the same way and
|
|
with the same restriction as <b>Quadrangle preference</b>, but
|
|
the transition area is located along the coarser meshed sides.
|
|
- <b>Reduced</b> type forces building only quadrangles and the transition
|
|
between the sides is made gradually, layer by layer. This type has
|
|
a limitation on the number of segments: one pair of opposite sides must have
|
|
the same number of segments, the other pair must have an even difference
|
|
between the numbers of segments on the sides. In addition, the number
|
|
of rows between sides with different discretization
|
|
should be enough for the transition. Following the fastest transition
|
|
pattern, three segments become one (see the image below), hence
|
|
the least number of face rows needed to reduce from Nmax segments
|
|
to Nmin segments is log<sub>3</sub>( Nmax / Nmin ). The number of
|
|
face rows is equal to the number of segments on each of equally
|
|
discretized sides.
|
|
\image html reduce_three_to_one.png "The fastest transition pattern: 3 to 1"
|
|
|
|
<b>See Also</b> a sample TUI Script of a
|
|
\ref tui_quadrangle_parameters "Quadrangle Parameters" hypothesis.
|
|
|
|
<br>
|
|
*/
|