mirror of
https://git.salome-platform.org/gitpub/modules/smesh.git
synced 2024-09-23 19:22:52 +05:00
73 lines
3.2 KiB
Plaintext
73 lines
3.2 KiB
Plaintext
/*!
|
|
|
|
\page prism_3d_algo_page 3D extrusion meshing algorithm
|
|
|
|
3D extrusion algorithm can be used for meshing prisms, i.e. 3D shapes
|
|
defined by two opposing faces having the same number of vertices and
|
|
edges. These two faces should be connected by quadrangle "side" faces.
|
|
|
|
The prism is allowed to have sides composed of several faces. (A prism
|
|
side is a row of faces (or one face) connecting the corresponding edges of
|
|
the top and base faces). However, a prism
|
|
side can be split only vertically as indicated in the
|
|
picture below.
|
|
|
|
\image html prism_ok_ko.png "A suitable and an unsuitable prism"
|
|
In this picture, the left prism is suitable for meshing with 3D
|
|
extrusion algorithm: it has six sides, two of which are split
|
|
vertically. The right prism cannot be meshed with this
|
|
algorithm because one of the prism sides is split horizontally (the
|
|
splitting edge is highlighted).
|
|
|
|
The algorithm can propagate 2D mesh not only between horizontal
|
|
(i.e. base and top) faces of one prism but also between faces of prisms
|
|
organized in a stack and between stacks sharing prism sides.
|
|
|
|
\image html prism_stack.png "Prism stacks"
|
|
This picture shows four neighboring prism stacks, each comprising two prisms.
|
|
The shown sub-mesh is used by the algorithm to mesh
|
|
all eight prisms in the stacks.
|
|
|
|
To use <em>3D extrusion</em> algorithm you need to assign algorithms
|
|
and hypotheses of lower dimensions as follows.
|
|
(A sample picture below shows algorithms and hypotheses used to
|
|
mesh a cylinder with prismatic volumes).
|
|
|
|
\image html prism_needs_hyps.png
|
|
|
|
The \b Global algorithms and hypotheses to be chosen at
|
|
\ref create_mesh_anchor "Creation of a mesh object" are:
|
|
<ul>
|
|
<li> 1D algorithm and hypothesis that will be applied for meshing
|
|
(logically) vertical edges of the prism (which connect the top and the
|
|
base faces of the prism). In the sample picture above these are
|
|
"Regular_1D" algorithm and "Nb. Segments" hypothesis named "Vertical
|
|
Nb. Segments".</li>
|
|
</ul>
|
|
|
|
The \b Local algorithms and hypotheses to be chosen at
|
|
\ref constructing_submeshes_page "Construction of sub-meshes" are:
|
|
<ul>
|
|
<li> 1D and 2D algorithms and hypotheses that will be applied for
|
|
meshing the top and the base prism faces. These faces can be meshed
|
|
with any type of 2D elements: quadrangles, triangles, polygons or
|
|
their mix. It is enough to define a sub-mesh on either the top or the base
|
|
face. In the sample picture above, "NETGEN_1D2D" algorithm meshes
|
|
"bottom disk" face with triangles. (1D algorithm is not
|
|
assigned as "NETGEN_1D2D" does not require divided edges to create a 2D mesh.)
|
|
</li>
|
|
<li> Optionally you can define a 1D sub-mesh on some vertical edges
|
|
of stacked prisms, which will override the global 1D hypothesis mentioned
|
|
above. In the <b>Prism stacks</b> picture, the
|
|
vertical division is not equidistant on the whole length because
|
|
a "Number Of Segments" hypothesis with Scale Factor=3 is assigned to
|
|
the highlighted edge.
|
|
</li></ul>
|
|
|
|
\image html image157.gif "Prism with 3D extrusion meshing. Vertical division is different on neighbor edges because several local 1D hypotheses are assigned."
|
|
|
|
\sa a sample TUI Script of
|
|
\ref tui_prism_3d_algo "Use 3D extrusion meshing algorithm".
|
|
|
|
*/
|