mirror of
https://git.salome-platform.org/gitpub/modules/smesh.git
synced 2024-09-23 11:12:51 +05:00
825 lines
19 KiB
Plaintext
825 lines
19 KiB
Plaintext
/*!
|
|
|
|
\page tui_quality_controls_page Quality Controls
|
|
|
|
\section tui_free_borders Free Borders
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
|
|
# create open shell: a box without one plane
|
|
box = geompy.MakeBox(0., 0., 0., 20., 20., 15.)
|
|
FaceList = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
|
|
FaceList.remove(FaceList[5])
|
|
box = geompy.MakeShell(FaceList)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Mesh_free_borders")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(5)
|
|
algo = mesh.Triangle()
|
|
algo.MaxElementArea(20.)
|
|
mesh.Compute()
|
|
|
|
# criterion : free borders
|
|
aFilter = smesh.GetFilter(smesh.EDGE, smesh.FT_FreeBorders)
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Free borders Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateGroup(SMESH.EDGE, "Free borders")
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_borders_at_multiconnection Borders at Multiconnection
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
import SMESH
|
|
|
|
# create open shell: a box without one plane
|
|
box = geompy.MakeBox(0., 0., 0., 20., 20., 15.)
|
|
FaceList = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
|
|
FaceList.remove(FaceList[5])
|
|
box = geompy.MakeShell(FaceList)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Mesh_borders_at_multi-connections")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(5)
|
|
algo = mesh.Triangle()
|
|
algo.MaxElementArea(20.)
|
|
mesh.Compute()
|
|
|
|
# Criterion : Borders at multi-connection
|
|
nb_conn = 2
|
|
|
|
aFilter = smesh.GetFilter(smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, nb_conn)
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Borders at multi-connections Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateGroup(SMESH.EDGE, "Borders at multi-connections")
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_length_1d Length 1D
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
|
|
# create open shell: a box without one plane
|
|
box = geompy.MakeBox(0., 0., 0., 20., 20., 15.)
|
|
FaceList = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
|
|
FaceList.remove(FaceList[5])
|
|
box = geompy.MakeShell(FaceList)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Mesh_Length_1D")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(5)
|
|
algo = mesh.Triangle()
|
|
algo.MaxElementArea(20.)
|
|
mesh.Compute()
|
|
|
|
# Criterion : Length > 3.
|
|
length_margin = 3.
|
|
|
|
aFilter = smesh.GetFilter(smesh.EDGE, smesh.FT_Length, smesh.FT_MoreThan, length_margin)
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Edges length > ", length_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateGroup(SMESH.EDGE, "Edges with length > " + `length_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_free_edges Free Edges
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
aFilterMgr = smesh.CreateFilterManager()
|
|
|
|
# Remove some elements to obtain free edges
|
|
# Criterion : AREA > 95.
|
|
area_margin = 95.
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, area_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
mesh.RemoveElements(anIds)
|
|
|
|
# Criterion : Free Edges
|
|
aBorders = mesh.GetFreeBorders()
|
|
|
|
# create groups
|
|
aGroupF = mesh.CreateEmptyGroup(smesh.FACE, "Faces with free edges")
|
|
aGroupN = mesh.CreateEmptyGroup(smesh.NODE, "Nodes on free edges")
|
|
|
|
# fill groups with elements, corresponding to the criterion
|
|
print ""
|
|
print "Criterion: Free edges Nb = ", len(aBorders)
|
|
for i in range(len(aBorders)):
|
|
aBorder = aBorders[i]
|
|
print "Face # ", aBorder.myElemId, " : Edge between nodes (",
|
|
print aBorder.myPnt1, ", ", aBorder.myPnt2, ")"
|
|
|
|
aGroupF.Add([aBorder.myElemId])
|
|
aGroupN.Add([aBorder.myPnt1, aBorder.myPnt2])
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_free_nodes Free Nodes
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
|
|
# create box
|
|
box = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Mesh_free_nodes")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(10)
|
|
algo = mesh.Triangle(smesh.MEFISTO)
|
|
algo.MaxElementArea(150.)
|
|
mesh.Compute()
|
|
|
|
# Remove some elements to obtain free nodes
|
|
# Criterion : AREA < 80.
|
|
area_margin = 80.
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Area, smesh.FT_LessThan, area_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
mesh.RemoveElements(anIds)
|
|
|
|
# criterion : free nodes
|
|
aFilter = smesh.GetFilter(smesh.NODE, smesh.FT_FreeNodes)
|
|
anNodeIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.NODE, "Free_nodes")
|
|
aGroup.Add(anNodeIds)
|
|
|
|
# print the result
|
|
print "Criterion: Free nodes Nb = ", len(anNodeIds)
|
|
j = 1
|
|
for i in range(len(anNodeIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anNodeIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_free_faces Free Faces
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
####### GEOM part ########
|
|
|
|
Box_1 = geompy.MakeBoxDXDYDZ(200, 200, 200)
|
|
Box_1_vertex_6 = geompy.GetSubShape(Box_1, [6])
|
|
Box_1 = geompy.GetMainShape(Box_1_vertex_6)
|
|
Box_1_vertex_16 = geompy.GetSubShape(Box_1, [16])
|
|
Box_1 = geompy.GetMainShape(Box_1_vertex_16)
|
|
Box_1_vertex_11 = geompy.GetSubShape(Box_1, [11])
|
|
Box_1 = geompy.GetMainShape(Box_1_vertex_11)
|
|
Plane_1 = geompy.MakePlaneThreePnt(Box_1_vertex_6, Box_1_vertex_16, Box_1_vertex_11, 2000)
|
|
Partition_1 = geompy.MakePartition([Box_1], [Plane_1], [], [], geompy.ShapeType["SOLID"], 0, [], 0)
|
|
|
|
Box_1_vertex_19 = geompy.GetSubShape(Box_1, [19])
|
|
Box_1_vertex_21 = geompy.GetSubShape(Box_1, [21])
|
|
Plane_2 = geompy.MakePlaneThreePnt(Box_1_vertex_16, Box_1_vertex_19, Box_1_vertex_21, 2000)
|
|
|
|
geompy.addToStudy( Box_1, "Box_1" )
|
|
geompy.addToStudyInFather( Box_1, Box_1_vertex_6, "Box_1:vertex_6" )
|
|
geompy.addToStudyInFather( Box_1, Box_1_vertex_16, "Box_1:vertex_16" )
|
|
geompy.addToStudyInFather( Box_1, Box_1_vertex_11, "Box_1:vertex_11" )
|
|
geompy.addToStudy( Plane_1, "Plane_1" )
|
|
geompy.addToStudy( Partition_1, "Partition_1" )
|
|
geompy.addToStudyInFather( Box_1, Box_1_vertex_19, "Box_1:vertex_19" )
|
|
geompy.addToStudyInFather( Box_1, Box_1_vertex_21, "Box_1:vertex_21" )
|
|
geompy.addToStudy( Plane_2, "Plane_2" )
|
|
|
|
###### SMESH part ######
|
|
import smesh
|
|
|
|
import StdMeshers
|
|
|
|
Mesh_1 = smesh.Mesh(Partition_1)
|
|
Regular_1D = Mesh_1.Segment()
|
|
Max_Size_1 = Regular_1D.MaxSize(34.641)
|
|
MEFISTO_2D = Mesh_1.Triangle()
|
|
Tetrahedronn = Mesh_1.Tetrahedron()
|
|
isDone = Mesh_1.Compute()
|
|
|
|
# create a group of free faces
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_FreeFaces )
|
|
aFaceIds = Mesh_1.GetIdsFromFilter(aFilter)
|
|
|
|
aGroup = Mesh_1.CreateEmptyGroup(smesh.FACE, "Free_faces")
|
|
aGroup.Add(aFaceIds)
|
|
|
|
# print the result
|
|
print "Criterion: Free faces Nb = ", len(aFaceIds)
|
|
j = 1
|
|
for i in range(len(aFaceIds)):
|
|
if j > 20: j = 1; print ""
|
|
print aFaceIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
#filter faces from plane 2
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_BelongToPlane, Plane_2)
|
|
aFaceIds = Mesh_1.GetIdsFromFilter(aFilter)
|
|
aGroup.Remove(aFaceIds)
|
|
|
|
# create a group of shared faces (located on partition boundary inside box)
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_BelongToPlane, Plane_1)
|
|
aFaceIds = Mesh_1.GetIdsFromFilter(aFilter)
|
|
|
|
aGroup = Mesh_1.CreateEmptyGroup(smesh.FACE, "Shared_faces")
|
|
aGroup.Add(aFaceIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_bare_border_faces Bare border faces
|
|
|
|
\code
|
|
from smesh import *
|
|
SetCurrentStudy(salome.myStudy)
|
|
|
|
box = geompy.MakeBoxDXDYDZ(100, 100, 100)
|
|
geompy.addToStudy( box, "box" )
|
|
|
|
mesh = smesh.Mesh(box)
|
|
mesh.Segment().NumberOfSegments(3)
|
|
mesh.Quadrangle()
|
|
mesh.Compute()
|
|
|
|
# remove 2 faces
|
|
allFaces = mesh.GetElementsByType(FACE)
|
|
mesh.RemoveElements( allFaces[0:2])
|
|
|
|
bareGroup = mesh.MakeGroup("bare faces", FACE, FT_BareBorderFace)
|
|
assert(bareGroup.Size() == 3)
|
|
\endcode
|
|
|
|
\section tui_bare_border_volumes Bare border volumes
|
|
|
|
\code
|
|
from smesh import *
|
|
SetCurrentStudy(salome.myStudy)
|
|
|
|
box = geompy.MakeBoxDXDYDZ(100, 30, 10)
|
|
# the smallest face of the box
|
|
face = geompy.SubShapeAllSorted( box, geompy.ShapeType["FACE"])[0]
|
|
|
|
geompy.addToStudy( box, "box" )
|
|
geompy.addToStudyInFather( box, face, "face" )
|
|
|
|
mesh = Mesh(box)
|
|
mesh.AutomaticHexahedralization();
|
|
|
|
# remove half of mesh faces from the smallest face
|
|
faceFaces = mesh.GetSubMeshElementsId(face)
|
|
faceToRemove = faceFaces[: len(faceFaces)/2]
|
|
mesh.RemoveElements( faceToRemove )
|
|
|
|
# make a group of volumes missing the removed faces
|
|
bareGroup = mesh.MakeGroup("bare volumes", VOLUME, FT_BareBorderVolume)
|
|
assert(bareGroup.Size() == len( faceToRemove))
|
|
\endcode
|
|
|
|
\section tui_over_constrained_faces Over-constrained faces
|
|
\code
|
|
from smesh import *
|
|
SetCurrentStudy(salome.myStudy)
|
|
|
|
mesh = Mesh()
|
|
faceFilter = GetFilter(FACE,FT_OverConstrainedFace)
|
|
|
|
#make an edge
|
|
n1 = mesh.AddNode(0,0,0)
|
|
n2 = mesh.AddNode(10,0,0)
|
|
edge = mesh.AddEdge([n1,n2])
|
|
assert( not mesh.GetIdsFromFilter( faceFilter ))
|
|
|
|
# make faces
|
|
mesh.ExtrusionSweep([edge], MakeDirStruct(0,7,0), 5)
|
|
assert( 2 == len( mesh.GetIdsFromFilter( faceFilter )))
|
|
\endcode
|
|
|
|
\section tui_over_constrained_volumes Over-constrained volumes
|
|
\code
|
|
from smesh import *
|
|
SetCurrentStudy(salome.myStudy)
|
|
|
|
mesh = Mesh()
|
|
volumeFilter = GetFilter(VOLUME,FT_OverConstrainedVolume)
|
|
|
|
# make volumes by extrusion of one face
|
|
n1 = mesh.AddNode(0,0,0)
|
|
n2 = mesh.AddNode(10,0,0)
|
|
edge = mesh.AddEdge([n1,n2])
|
|
mesh.ExtrusionSweep([edge], MakeDirStruct(0,7,0), 1)
|
|
mesh.ExtrusionSweep( mesh.GetElementsByType(FACE), MakeDirStruct(0,0,5), 7)
|
|
assert( 2 == len( mesh.GetIdsFromFilter( volumeFilter )))
|
|
\endcode
|
|
|
|
\section tui_length_2d Length 2D
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
|
|
# create open shell: a box without one plane
|
|
box = geompy.MakeBox(0., 0., 0., 20., 20., 15.)
|
|
FaceList = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
|
|
FaceList.remove(FaceList[5])
|
|
box = geompy.MakeShell(FaceList)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Mesh_Length_2D")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(5)
|
|
algo = mesh.Triangle()
|
|
algo.MaxElementArea(20.)
|
|
mesh.Compute()
|
|
|
|
# Criterion : Length 2D > 5.7
|
|
length_margin = 5.7
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Length2D, smesh.FT_MoreThan, length_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Edges length 2D > ", length_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Faces with length 2D > " + `length_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_borders_at_multiconnection_2d Borders at Multiconnection 2D
|
|
|
|
\code
|
|
import salome
|
|
import geompy
|
|
|
|
import smesh
|
|
|
|
# create a compound of two glued boxes
|
|
box1 = geompy.MakeBox(0., 0., 0., 20., 20., 15.)
|
|
box2 = geompy.MakeTranslation(box1, 0., 20., 0)
|
|
comp = geompy.MakeCompound([box1, box2])
|
|
box = geompy.MakeGlueFaces(comp, 0.000001)
|
|
idbox = geompy.addToStudy(box, "box")
|
|
|
|
# create a mesh
|
|
mesh = smesh.Mesh(box, "Box compound : 2D triangle mesh")
|
|
algo = mesh.Segment()
|
|
algo.NumberOfSegments(5)
|
|
algo = mesh.Triangle()
|
|
algo.MaxElementArea(20.)
|
|
mesh.Compute()
|
|
|
|
# Criterion : MULTI-CONNECTION 2D = 3
|
|
nb_conn = 3
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MultiConnection2D, smesh.FT_EqualTo, nb_conn)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Borders at multi-connection 2D = ", nb_conn, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Borders at multi-connection 2D = " + `nb_conn`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_area Area
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : AREA > 100.
|
|
area_margin = 100.
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, area_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Area > ", area_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Area > " + `area_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_taper Taper
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : Taper > 3e-20
|
|
taper_margin = 3e-20
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, taper_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Taper > ", taper_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Taper > " + `taper_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_aspect_ratio Aspect Ratio
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : ASPECT RATIO > 1.8
|
|
ar_margin = 1.8
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, ar_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Aspect Ratio > ", ar_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Aspect Ratio > " + `ar_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_minimum_angle Minimum Angle
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : MINIMUM ANGLE < 35.
|
|
min_angle = 35.
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, min_angle)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Minimum Angle < ", min_angle, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Minimum Angle < " + `min_angle`)
|
|
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_warping Warping
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : WARP ANGLE > 1e-15
|
|
wa_margin = 1e-15
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, wa_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Warp > ", wa_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Warp > " + `wa_margin`)
|
|
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_skew Skew
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : Skew > 38.
|
|
skew_margin = 38.
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, skew_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Skew > ", skew_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Skew > " + `skew_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_max_element_length_2d Element Diameter 2D
|
|
|
|
\code
|
|
import SMESH_mechanic
|
|
|
|
smesh = SMESH_mechanic.smesh
|
|
mesh = SMESH_mechanic.mesh
|
|
salome = SMESH_mechanic.salome
|
|
|
|
# Criterion : ELEMENT DIAMETER 2D > 10
|
|
mel_2d_margin = 10
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MaxElementLength2D, smesh.FT_MoreThan, mel_2d_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Element Diameter 2D Ratio > ", mel_2d_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Element Diameter 2D > " + `mel_2d_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_aspect_ratio_3d Aspect Ratio 3D
|
|
|
|
\code
|
|
import SMESH_mechanic_tetra
|
|
|
|
smesh = SMESH_mechanic_tetra.smesh
|
|
mesh = SMESH_mechanic_tetra.mesh
|
|
salome = SMESH_mechanic_tetra.salome
|
|
|
|
# Criterion : ASPECT RATIO 3D > 4.5
|
|
ar_margin = 4.5
|
|
|
|
aFilter = smesh.GetFilter(smesh.VOLUME, smesh.FT_AspectRatio3D, smesh.FT_MoreThan, ar_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Aspect Ratio 3D > ", ar_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.VOLUME, "Aspect Ratio 3D > " + `ar_margin`)
|
|
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_volume Volume
|
|
|
|
\code
|
|
import SMESH_mechanic_tetra
|
|
|
|
smesh = SMESH_mechanic_tetra.smesh
|
|
mesh = SMESH_mechanic_tetra.mesh
|
|
salome = SMESH_mechanic_tetra.salome
|
|
|
|
# Criterion : VOLUME < 7.
|
|
volume_margin = 7.
|
|
|
|
aFilter = smesh.GetFilter(smesh.VOLUME, smesh.FT_Volume3D, smesh.FT_LessThan, volume_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print ""
|
|
print "Criterion: Volume < ", volume_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.VOLUME, "Volume < " + `volume_margin`)
|
|
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
\section tui_max_element_length_3d Element Diameter 3D
|
|
|
|
\code
|
|
import SMESH_mechanic_tetra
|
|
|
|
smesh = SMESH_mechanic_tetra.smesh
|
|
mesh = SMESH_mechanic_tetra.mesh
|
|
salome = SMESH_mechanic_tetra.salome
|
|
|
|
# Criterion : ELEMENT DIAMETER 3D > 10
|
|
mel_3d_margin = 10
|
|
|
|
aFilter = smesh.GetFilter(smesh.FACE, smesh.FT_MaxElementLength3D, smesh.FT_MoreThan, mel_3d_margin)
|
|
|
|
anIds = mesh.GetIdsFromFilter(aFilter)
|
|
|
|
# print the result
|
|
print "Criterion: Element Diameter 3D Ratio > ", mel_3d_margin, " Nb = ", len(anIds)
|
|
j = 1
|
|
for i in range(len(anIds)):
|
|
if j > 20: j = 1; print ""
|
|
print anIds[i],
|
|
j = j + 1
|
|
pass
|
|
print ""
|
|
|
|
# create a group
|
|
aGroup = mesh.CreateEmptyGroup(smesh.FACE, "Element Diameter 3D > " + `mel_3d_margin`)
|
|
aGroup.Add(anIds)
|
|
|
|
salome.sg.updateObjBrowser(1)
|
|
\endcode
|
|
|
|
*/
|