smesh/idl/SMESH_BasicHypothesis.idl
eap 4479d7348d {
/*!
      * Sets <start segment length> or <end segment length> parameter value
+     * * OBSOLETE *. Avoid such a way of interface design
+     * * It is recommended to dedicate a method to each parameter.
      */
     void SetLength(in double length, in boolean isStartLength)
       raises (SALOME::SALOME_Exception);

     /*!
+     * Sets <start segment length> parameter value
+     */
+    void SetStartLength(in double length)
+      raises (SALOME::SALOME_Exception);
+
+    /*!
+     * Sets <end segment length> parameter value
+     */
+    void SetEndLength(in double length)
+      raises (SALOME::SALOME_Exception);
2009-07-15 13:26:29 +00:00

780 lines
22 KiB
Plaintext

// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
// version 2.1 of the License.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
// File : SMESH_BasicHypothesis.idl
// Author : Paul RASCLE, EDF
//
#ifndef _SMESH_BASICHYPOTHESIS_IDL_
#define _SMESH_BASICHYPOTHESIS_IDL_
#include "SALOME_Exception.idl"
#include "SMESH_Hypothesis.idl"
#include "SMESH_Mesh.idl"
/*!
* StdMeshers: interfaces to standard hypotheses and algorithms
*/
module StdMeshers
{
/*!
* StdMeshers_LocalLength: interface of "Average length" hypothesis
*/
interface StdMeshers_LocalLength : SMESH::SMESH_Hypothesis
{
/*!
* Sets <length> parameter value
*/
void SetLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Sets <precision> parameter value
*
* Precision parameter is used to allow rounding a number of segments,
* calculated from the edge length and average length of segment,
* to the lower integer, if this value outstands from it in bounds of the precision.
* Otherwise, the number of segments is rounded to the higher integer.
* Use value 0.5 to provide rounding to the nearest integer,
* 1.0 for the lower integer, 0.0 for the higher integer.
* Default value is 1e-07. In old studies, restored from file,
* this value will be set to zero, what corresponds to the old behaviour.
*/
void SetPrecision(in double precision)
raises (SALOME::SALOME_Exception);
/*!
* Returns <length> parameter value
*/
double GetLength();
/*!
* Returns <precision> parameter value
*/
double GetPrecision();
};
/*!
* StdMeshers_MaxLength: interface of "Max length" hypothesis
*/
interface StdMeshers_MaxLength : SMESH::SMESH_Hypothesis
{
/*!
* Sets <length> parameter value
*/
void SetLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Returns <length> parameter value
*/
double GetLength();
/*!
* Returns true if preestemated length is defined
*/
boolean HavePreestimatedLength();
/*!
* Returns preestemated length
*/
double GetPreestimatedLength();
/*!
* Sets preestemated length
*/
void SetPreestimatedLength(in double length);
/*!
* Sets boolean parameter enabling/desabling usage of length computed
* basing on size of bounding box of shape to mesh
*/
void SetUsePreestimatedLength(in boolean toUse);
/*!
* Returns value of boolean parameter enabling/desabling usage of length computed
* basing on size of bounding box of shape to mesh
*/
boolean GetUsePreestimatedLength();
};
/*!
* StdMeshers_AutomaticLength: interface of "Automatic length" hypothesis
*/
interface StdMeshers_AutomaticLength : SMESH::SMESH_Hypothesis
{
/*!
* Sets Fineness parameter value
*/
void SetFineness(in double theFineness)
raises (SALOME::SALOME_Exception);
/*!
* Returns <Fineness> parameter value
*/
double GetFineness();
};
/*!
* StdMeshers_NumberOfSegments: interface of "Nb. Segments" hypothesis
*/
interface StdMeshers_NumberOfSegments : SMESH::SMESH_Hypothesis
{
/*!
* Builds and returns point distribution according to passed density function
*/
SMESH::double_array BuildDistributionExpr( in string func, in long nbSeg, in long conv )
raises (SALOME::SALOME_Exception);
SMESH::double_array BuildDistributionTab( in SMESH::double_array func, in long nbSeg, in long conv )
raises (SALOME::SALOME_Exception);
/*!
* Sets <number of segments> parameter value
*/
void SetNumberOfSegments(in long segmentsNumber)
raises (SALOME::SALOME_Exception);
/*!
* Returns <number of segments> parameter value
*/
long GetNumberOfSegments();
/*!
* Sets <distribution type> parameter value
*/
void SetDistrType(in long typ)
raises (SALOME::SALOME_Exception);
/*!
* Returns <distribution type> parameter value
*/
long GetDistrType();
/*!
* Sets <scale factor> parameter value
*/
void SetScaleFactor(in double scaleFactor)
raises (SALOME::SALOME_Exception);
/*!
* Returns <scale factor> parameter value
*/
double GetScaleFactor()
raises (SALOME::SALOME_Exception);
/*!
* Sets <table function> parameter value for distribution DT_TabFunc
*/
void SetTableFunction(in SMESH::double_array table)
raises (SALOME::SALOME_Exception);
/*!
* Returns <table function> parameter value for distribution DT_TabFunc
*/
SMESH::double_array GetTableFunction()
raises (SALOME::SALOME_Exception);
/*!
* Sets <expression function> parameter value for distribution DT_ExprFunc
*/
void SetExpressionFunction(in string expr)
raises (SALOME::SALOME_Exception);
/*!
* Returns <expression function> parameter value for distribution DT_ExprFunc
*/
string GetExpressionFunction()
raises (SALOME::SALOME_Exception);
/*!
* Sets <conversion mode> parameter value for functional distributions
*/
void SetConversionMode(in long conv )
raises (SALOME::SALOME_Exception);
/*!
* Returns <conversion mode> parameter value for functional distributions
*/
long ConversionMode()
raises (SALOME::SALOME_Exception);
/*!
* Set list of edges to reverse
*/
void SetReversedEdges( in SMESH::long_array list );
/*!
* Returns list of edges to reverse
*/
SMESH::long_array GetReversedEdges();
/*!
* Set entry of the main object
*/
void SetObjectEntry( in string entry );
/*!
* Get the entry of the main object
*/
string GetObjectEntry();
};
/*!
* StdMeshers_Arithmetic1D: interface of "Arithmetic 1D" hypothesis
*/
interface StdMeshers_Arithmetic1D : SMESH::SMESH_Hypothesis
{
/*!
* Sets <start segment length> or <end segment length> parameter value
* * OBSOLETE *. Avoid such a way of interface design
* * It is recommended to dedicate a method to each parameter.
*/
void SetLength(in double length, in boolean isStartLength)
raises (SALOME::SALOME_Exception);
/*!
* Sets <start segment length> parameter value
*/
void SetStartLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Sets <end segment length> parameter value
*/
void SetEndLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Returns <start segment length> or <end segment length> parameter value
*/
double GetLength(in boolean isStartLength);
/*!
* Set list of edges to reverse
*/
void SetReversedEdges( in SMESH::long_array list );
/*!
* Returns list of edges to reverse
*/
SMESH::long_array GetReversedEdges();
/*!
* Set entry of the main object
*/
void SetObjectEntry( in string entry );
/*!
* Get the entry of the main object
*/
string GetObjectEntry();
};
/*!
* StdMeshers_MaxElementArea: interface of "Max. Triangle Area" hypothesis
*/
interface StdMeshers_MaxElementArea : SMESH::SMESH_Hypothesis
{
/*!
* Sets <maximum element area> parameter value
*/
void SetMaxElementArea(in double area)
raises (SALOME::SALOME_Exception);
/*!
* Returns <maximum element area> parameter value
*/
double GetMaxElementArea();
};
/*!
* StdMeshers_LengthFromEdges: interface of "Length From Edges (2D Hyp. for Triangulator)" hypothesis
*/
interface StdMeshers_LengthFromEdges : SMESH::SMESH_Hypothesis
{
/*!
* Sets <mode> parameter value
*/
void SetMode(in long mode)
raises (SALOME::SALOME_Exception);
/*!
* Returns <mode> parameter value
*/
long GetMode();
};
/*!
* StdMeshers_StartEndLength: interface of "Start and End Length" hypothesis
*/
interface StdMeshers_StartEndLength : SMESH::SMESH_Hypothesis
{
/*!
* Sets <start segment length> or <end segment length> parameter value
* * OBSOLETE *. Avoid such a way of interface design.
* * It is recommended to dedicate a method to each parameter.
*/
void SetLength(in double length, in boolean isStartLength)
raises (SALOME::SALOME_Exception);
/*!
* Sets <start segment length> parameter value
*/
void SetStartLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Sets <end segment length> parameter value
*/
void SetEndLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Returns <start segment length> or <end segment length> parameter value
*/
double GetLength(in boolean isStartLength);
/*!
* Set list of edges to reverse
*/
void SetReversedEdges( in SMESH::long_array list );
/*!
* Returns list of edges to reverse
*/
SMESH::long_array GetReversedEdges();
/*!
* Set entry of the main object
*/
void SetObjectEntry( in string entry );
/*!
* Get the entry of the main object
*/
string GetObjectEntry();
};
/*!
* StdMeshers_Deflection1D: interface of "Deflection 1D" hypothesis
*/
interface StdMeshers_Deflection1D : SMESH::SMESH_Hypothesis
{
/*!
* Sets <deflection> parameter value
*/
void SetDeflection(in double deflection)
raises (SALOME::SALOME_Exception);
/*!
* Returns <deflection> parameter value
*/
double GetDeflection();
};
/*!
* StdMeshers_MaxElementVolume: interface of "Max. Hexahedron or Tetrahedron Volume" hypothesis
*/
interface StdMeshers_MaxElementVolume : SMESH::SMESH_Hypothesis
{
/*!
* Sets <maximum element volume> parameter value
*/
void SetMaxElementVolume(in double volume)
raises (SALOME::SALOME_Exception);
/*!
* Returns <maximum element volume> parameter value
*/
double GetMaxElementVolume();
};
/*!
* StdMeshers_NotConformAllowed: interface of "Not Conform Mesh Allowed" hypothesis.
* Presence of this hypothesis permits to algorithm generation of not conform mesh.
*/
interface StdMeshers_NotConformAllowed : SMESH::SMESH_Hypothesis
{
};
/*!
* StdMeshers_Propagation: interface of "Propagation" hypothesis.
* Presence of this hypothesis on any edge propagates any other 1D
* hypothesis from this edge on all edges, opposite to it.
* It concerns only edges of quadrangle faces.
*/
interface StdMeshers_Propagation : SMESH::SMESH_Hypothesis
{
};
/*!
* StdMeshers_QuadranglePreference: interface of "QuadranglePreference" hypothesis.
* This hypothesis is used by StdMeshers_Quadrangle_2D algorithm.
* Presence of this hypothesis forces construction of quadrangles if the number
* of nodes on opposite edges is not the same in the case where the global number
* of nodes on edges is even
*/
interface StdMeshers_QuadranglePreference : SMESH::SMESH_Hypothesis
{
};
/*!
* StdMeshers_TrianglePreference: interface of "TrianglePreference" hypothesis.
* This hypothesis is used by StdMeshers_Quadrangle_2D algorithm.
* Presence of this hypothesis forces construction of triangles in the refinement
* area if the number of nodes on opposite edges is not the same.
*/
interface StdMeshers_TrianglePreference : SMESH::SMESH_Hypothesis
{
};
/*!
* StdMeshers_QuadraticMesh: interface of "QuadraticMesh" hypothesis.
* This is an auxiliary 1D hypothesis whose presence forces construction
* of quadratic edges.
* If the 2D mesher sees that all boundary edges are quadratic ones,
* it generates quadratic faces, else it generates linear faces using
* medium nodes as if they were vertex ones.
* The 3D mesher generates quadratic volumes only if all boundary faces
* are quadratic ones, else it fails.
*/
interface StdMeshers_QuadraticMesh : SMESH::SMESH_Hypothesis
{
};
/*!
* StdMeshers_NumberOfLayers: interface of "Nb. Layers" hypothesis.
* This hypothesis is used by "Radial prism" algorithm.
* It specifies number of segments between the internal
* and the external surfaces.
*/
interface StdMeshers_NumberOfLayers : SMESH::SMESH_Hypothesis
{
/*!
* Sets <number of segments> parameter value
*/
void SetNumberOfLayers(in long numberOfLayers)
raises (SALOME::SALOME_Exception);
/*!
* Returns <number of layers> parameter value
*/
long GetNumberOfLayers();
};
/*!
* StdMeshers_LayerDistribution: interface of "Distribution of Layers" hypothesis.
* This hypothesis is used by "Radial prism" algorithm.
* It specifies 1D hypothesis defining distribution of segments between the internal
* and the external surfaces.
*/
interface StdMeshers_LayerDistribution : SMESH::SMESH_Hypothesis
{
/*!
* Sets 1D hypothesis specifying distribution of layers
*/
void SetLayerDistribution(in SMESH::SMESH_Hypothesis distributionHyp)
raises (SALOME::SALOME_Exception);
/*!
* Returns 1D hypothesis specifying distribution of layers
*/
SMESH::SMESH_Hypothesis GetLayerDistribution();
};
/*!
* interface of "ProjectionSource1D" hypothesis.
* This hypothesis specifies a meshed edge to take a mesh pattern from
* and optionally association of vertices between the source edge and a
* target one (where a hipothesis is assigned to)
*/
interface StdMeshers_ProjectionSource1D : SMESH::SMESH_Hypothesis
{
/*!
* Sets source <edge> to take a mesh pattern from
*/
void SetSourceEdge(in GEOM::GEOM_Object edge)
raises (SALOME::SALOME_Exception);
/*!
* Returns the source edge
*/
GEOM::GEOM_Object GetSourceEdge();
/*!
* Sets source <mesh> to take a mesh pattern from
*/
void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
/*!
* Return source mesh
*/
SMESH::SMESH_Mesh GetSourceMesh();
/*!
* Sets vertex association between the source edge and the target one.
* This parameter is optional
*/
void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex,
in GEOM::GEOM_Object targetVertex)
raises (SALOME::SALOME_Exception);
/*!
* Returns the vertex associated with the target vertex.
* Result may be nil if association not set
*/
GEOM::GEOM_Object GetSourceVertex();
/*!
* Returns the vertex associated with the source vertex.
* Result may be nil if association not set
*/
GEOM::GEOM_Object GetTargetVertex();
};
/*!
* interface of "ProjectionSource2D" hypothesis.
* This hypothesis specifies a meshed face to take a mesh pattern from
* and optionally association of vertices between the source face and a
* target one (where a hipothesis is assigned to)
*/
interface StdMeshers_ProjectionSource2D : SMESH::SMESH_Hypothesis
{
/*!
* Sets a source <face> to take a mesh pattern from
*/
void SetSourceFace(in GEOM::GEOM_Object face)
raises (SALOME::SALOME_Exception);
/*!
* Returns the source face
*/
GEOM::GEOM_Object GetSourceFace();
/*!
* Sets source <mesh> to take a mesh pattern from
*/
void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
/*!
* Return source mesh
*/
SMESH::SMESH_Mesh GetSourceMesh();
/*!
* Sets vertex association between the source face and the target one.
* This parameter is optional.
* Two vertices must belong to one edge of a face
*/
void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1,
in GEOM::GEOM_Object sourceVertex2,
in GEOM::GEOM_Object targetVertex1,
in GEOM::GEOM_Object targetVertex2)
raises (SALOME::SALOME_Exception);
/*!
* Returns the <i>-th source vertex associated with the <i>-th target vertex.
* Result may be nil if association not set.
* Valid indices are 1 and 2
*/
GEOM::GEOM_Object GetSourceVertex(in long i)
raises (SALOME::SALOME_Exception);
/*!
* Returns the <i>-th target vertex associated with the <i>-th source vertex.
* Result may be nil if association not set.
* Valid indices are 1 and 2
*/
GEOM::GEOM_Object GetTargetVertex(in long i)
raises (SALOME::SALOME_Exception);
};
/*!
* interface of "ProjectionSource3D" hypothesis.
* This hypothesis specifies a meshed shell or solid to take a mesh pattern from
* and optionally association of vertices between the source shape and a
* target one (where a hipothesis is assigned to)
*/
interface StdMeshers_ProjectionSource3D : SMESH::SMESH_Hypothesis
{
/*!
* Sets a source <shape> to take a mesh pattern from
*/
void SetSource3DShape(in GEOM::GEOM_Object shape)
raises (SALOME::SALOME_Exception);
/*!
* Returns the source shape
*/
GEOM::GEOM_Object GetSource3DShape();
/*!
* Sets source <mesh> to take a mesh pattern from
*/
void SetSourceMesh(in SMESH::SMESH_Mesh mesh);
/*!
* Return source mesh
*/
SMESH::SMESH_Mesh GetSourceMesh();
/*!
* Sets vertex association between the source shape and the target one.
* This parameter is optional.
* Two vertices must belong to one edge of a shape
*/
void SetVertexAssociation(in GEOM::GEOM_Object sourceVertex1,
in GEOM::GEOM_Object sourceVertex2,
in GEOM::GEOM_Object targetVertex1,
in GEOM::GEOM_Object targetVertex2)
raises (SALOME::SALOME_Exception);
/*!
* Returns the <i>-th source vertex associated with the <i>-th target vertex.
* Result may be nil if association not set.
* Valid indices are 1 and 2
*/
GEOM::GEOM_Object GetSourceVertex(in long i)
raises (SALOME::SALOME_Exception);
/*!
* Returns the <i>-th target vertex associated with the <i>-th source vertex.
* Result may be nil if association not set.
* Valid indices are 1 and 2
*/
GEOM::GEOM_Object GetTargetVertex(in long i)
raises (SALOME::SALOME_Exception);
};
/*!
* interface of "SegmentLengthAroundVertex" hypothesis.
* This hypothesis specifies length of segments adjacent to the vertex the
* hypothesis is assigned to
*/
interface StdMeshers_SegmentLengthAroundVertex : SMESH::SMESH_Hypothesis
{
/*!
* Sets <length> parameter value
*/
void SetLength(in double length)
raises (SALOME::SALOME_Exception);
/*!
* Returns <length> parameter value
*/
double GetLength();
};
/*!
* StdMeshers_SegmentAroundVertex_0D: interface of "SegmentAroundVertex" algorithm
*/
interface StdMeshers_SegmentAroundVertex_0D : SMESH::SMESH_0D_Algo
{
};
/*!
* StdMeshers_Regular_1D: interface of "Wire discretisation" algorithm
*/
interface StdMeshers_Regular_1D : SMESH::SMESH_1D_Algo
{
};
/*!
* StdMeshers_CompositeSegment_1D: interface of "Composite side discretisation" algorithm
*/
interface StdMeshers_CompositeSegment_1D : SMESH::SMESH_1D_Algo
{
};
/*!
* StdMeshers_MEFISTO_2D: interface of "Triangle (Mefisto)" algorithm
*/
interface StdMeshers_MEFISTO_2D : SMESH::SMESH_2D_Algo
{
};
/*!
* StdMeshers_Quadrangle_2D: interface of "Quadrangle (Mapping)" algorithm
*/
interface StdMeshers_Quadrangle_2D : SMESH::SMESH_2D_Algo
{
};
/*!
* StdMeshers_Hexa_3D: interface of "Hexahedron (i,j,k)" algorithm
*/
interface StdMeshers_Hexa_3D : SMESH::SMESH_3D_Algo
{
};
/*!
* StdMeshers_Prism_3D: interface of "3D extrusion" algorithm
*/
interface StdMeshers_Prism_3D : SMESH::SMESH_3D_Algo
{
};
/*!
* StdMeshers_RadialPrism_3D: interface of "Radial Prism" algorithm
*/
interface StdMeshers_RadialPrism_3D : SMESH::SMESH_3D_Algo
{
};
/*!
* StdMeshers_Projection_3D: interface of "Projection 3D" algorithm
*/
interface StdMeshers_Projection_3D : SMESH::SMESH_3D_Algo
{
};
/*!
* StdMeshers_Projection_2D: interface of "Projection 2D" algorithm
*/
interface StdMeshers_Projection_2D : SMESH::SMESH_2D_Algo
{
};
/*!
* StdMeshers_Projection_1D: interface of "Projection 1D" algorithm
*/
interface StdMeshers_Projection_1D : SMESH::SMESH_1D_Algo
{
};
/*!
* StdMeshers_UseExisting_2D: interface of "UseExisting 2D" algorithm
* doing nothing to allow mesh generation by mesh edition functions in TUI mode
*/
interface StdMeshers_UseExisting_2D : SMESH::SMESH_2D_Algo
{
};
/*!
* StdMeshers_UseExisting_1D: interface of "UseExisting 1D" algorithm
* doing nothing to allow mesh generation by mesh edition functions in TUI mode
*/
interface StdMeshers_UseExisting_1D : SMESH::SMESH_1D_Algo
{
};
};
#endif