GET_LIST_PREFIX=/ipset/get_

SYSTEMD_DIR=/lib/systemd
[ -d "$SYSTEMD_DIR" ] || SYSTEMD_DIR=/usr/lib/systemd
[ -d "$SYSTEMD_DIR" ] && SYSTEMD_SYSTEM_DIR="$SYSTEMD_DIR/system"

INIT_SCRIPT=/etc/init.d/zapret


exitp()
{
	echo
	echo press enter to continue
	read A
	exit $1
}

parse_var_checked()
{
	# $1 - file name
	# $2 - var name
	local sed="sed -nre s/^[[:space:]]*$2=[\\\"|\']?([^\\\"|\']*)[\\\"|\']?/\1/p"
	local v="$($sed <"$1" | tail -n 1)"
	eval $2=\"$v\"
}
parse_vars_checked()
{
	# $1 - file name
	# $2,$3,... - var names
	local f="$1"
	shift
	while [ -n "$1" ]; do
		parse_var_checked "$f" $1
		shift
	done	
}
edit_file()
{
	# $1 - file name
	local ed="$EDITOR"
	[ -n "$ed" ] || {
		for e in mcedit nano vi; do
			exists "$e" && {
				ed="$e"
				break
			}
		done
	}
	[ -n "$ed" ] && "$ed" "$1"
}
edit_vars()
{
	# $1,$2,... - var names
	local n=1 var v tmp="/tmp/zvars"
	rm -f "$tmp"
	while [ 1=1 ]; do
		eval var="\$$n"
		[ -n "$var" ] || break
		eval v="\$$var"
		echo $var=\"$v\" >>"$tmp"
		n=$(($n+1))
	done
	edit_file "$tmp" && parse_vars_checked "$tmp" "$@"
	rm -f "$tmp"
}

openrc_test()
{
	exists rc-update || return 1
	# some systems do not usse openrc-init but launch openrc from inittab
	[ "$INIT" = "openrc-init" ] || grep -qE "sysinit.*openrc" /etc/inittab 2>/dev/null
}
check_system()
{
	# $1 - nonempty = do not fail on unknown rc system

	echo \* checking system

	SYSTEM=""
	SYSTEMCTL=$(whichq systemctl)

	get_fwtype
	OPENWRT_FW3=

	local info
	UNAME=$(uname)
	if [ "$UNAME" = "Linux" ]; then
		# do not use 'exe' because it requires root
		local INIT="$(sed 's/\x0/\n/g' /proc/1/cmdline | head -n 1)"
		[ -L "$INIT" ] && INIT=$(readlink "$INIT")
		INIT=$(basename "$INIT")
		# some distros include systemctl without systemd
		if [ -d "$SYSTEMD_DIR" ] && [ -x "$SYSTEMCTL" ] && [ "$INIT" = "systemd" ]; then
			SYSTEM=systemd
		elif [ -f "/etc/openwrt_release" ] && exists opkg && exists uci && [ "$INIT" = "procd" ] ; then
		{
			SYSTEM=openwrt
			if openwrt_fw3 ; then
				OPENWRT_FW3=1
				info="openwrt firewall uses fw3"
				if is_ipt_flow_offload_avail; then
					info="$info. hardware flow offloading requires iptables."
				else
					info="$info. flow offloading unavailable."
				fi
			elif openwrt_fw4; then
				info="openwrt firewall uses fw4. flow offloading requires nftables."
			fi
		}
		elif openrc_test; then
			SYSTEM=openrc
		else
			echo system is not either systemd, openrc or openwrt based
			echo easy installer can set up config settings but can\'t configure auto start
			echo you have to do it manually. check readme.txt for manual setup info.
			if [ -n "$1" ] || ask_yes_no N "do you want to continue"; then
			    SYSTEM=linux
			else
			    exitp 5
			fi
		fi
	elif [ "$UNAME" = "Darwin" ]; then
		SYSTEM=macos
	else
		echo easy installer only supports Linux and MacOS. check readme.txt for supported systems and manual setup info.
		exitp 5
	fi
	linux_get_subsys
	echo system is based on $SYSTEM
	[ -n "$info" ] && echo $info
}

get_free_space_mb()
{
    df -m $PWD | awk '/[0-9]%/{print $(NF-2)}'
}
get_ram_kb()
{
    grep MemTotal /proc/meminfo | awk '{print $2}'
}
get_ram_mb()
{
    local R=$(get_ram_kb)
    echo $(($R/1024))
}

crontab_del()
{
	exists crontab || return

	echo \* removing crontab entry

	CRONTMP=/tmp/cron.tmp
	crontab -l >$CRONTMP 2>/dev/null
	if grep -q "$GET_LIST_PREFIX" $CRONTMP; then
		echo removing following entries from crontab :
		grep "$GET_LIST_PREFIX" $CRONTMP
		grep -v "$GET_LIST_PREFIX" $CRONTMP >$CRONTMP.2
		crontab $CRONTMP.2
		rm -f $CRONTMP.2
	fi
	rm -f $CRONTMP
}
crontab_del_quiet()
{
	exists crontab || return

	CRONTMP=/tmp/cron.tmp
	crontab -l >$CRONTMP 2>/dev/null
	if grep -q "$GET_LIST_PREFIX" $CRONTMP; then
		grep -v "$GET_LIST_PREFIX" $CRONTMP >$CRONTMP.2
		crontab $CRONTMP.2
		rm -f $CRONTMP.2
	fi
	rm -f $CRONTMP
}
crontab_add()
{
	# $1 - hour min
	# $2 - hour max
	[ -x "$GET_LIST" ] &&	{
		echo \* adding crontab entry

		if exists crontab; then
			CRONTMP=/tmp/cron.tmp
			crontab -l >$CRONTMP 2>/dev/null
			if grep -q "$GET_LIST_PREFIX" $CRONTMP; then
				echo some entries already exist in crontab. check if this is corrent :
				grep "$GET_LIST_PREFIX" $CRONTMP
			else
				end_with_newline <"$CRONTMP" || echo >>"$CRONTMP"
				echo "$(random 0 59) $(random $1 $2) */2 * * $GET_LIST" >>$CRONTMP
				crontab $CRONTMP
			fi
			rm -f $CRONTMP
		else
			echo '!!! CRON IS ABSENT !!! LISTS AUTO UPDATE WILL NOT WORK !!!'
		fi
	}
}
cron_ensure_running()
{
	# if no crontabs present in /etc/cron openwrt init script does not launch crond. this is default
	[ "$SYSTEM" = "openwrt" ] && {
		/etc/init.d/cron enable
		/etc/init.d/cron start
	}
}


service_start_systemd()
{
	echo \* starting zapret service

	"$SYSTEMCTL" start zapret || {
		echo could not start zapret service
		exitp 30
	}
}
service_stop_systemd()
{
	echo \* stopping zapret service

	"$SYSTEMCTL" daemon-reload
	"$SYSTEMCTL" disable zapret
	"$SYSTEMCTL" stop zapret
}
service_remove_systemd()
{
	echo \* removing zapret service

	rm -f "$SYSTEMD_SYSTEM_DIR/zapret.service"
	"$SYSTEMCTL" daemon-reload
}
timer_remove_systemd()
{
	echo \* removing zapret-list-update timer

	"$SYSTEMCTL" daemon-reload
	"$SYSTEMCTL" disable zapret-list-update.timer
	"$SYSTEMCTL" stop zapret-list-update.timer
	rm -f "$SYSTEMD_SYSTEM_DIR/zapret-list-update.service" "$SYSTEMD_SYSTEM_DIR/zapret-list-update.timer"
	"$SYSTEMCTL" daemon-reload
}

install_sysv_init()
{
	# $1 - "0"=disable
	echo \* installing init script

	[ -x "$INIT_SCRIPT" ] && {
		"$INIT_SCRIPT" stop
		"$INIT_SCRIPT" disable
	}
	ln -fs "$INIT_SCRIPT_SRC" "$INIT_SCRIPT"
	[ "$1" != "0" ] && "$INIT_SCRIPT" enable
}
install_openrc_init()
{
	# $1 - "0"=disable
	echo \* installing init script

	[ -x "$INIT_SCRIPT" ] && {
		"$INIT_SCRIPT" stop
		rc-update del zapret
	}
	ln -fs "$INIT_SCRIPT_SRC" "$INIT_SCRIPT"
	[ "$1" != "0" ] && rc-update add zapret
}
service_remove_openrc()
{
	echo \* removing zapret service

	[ -x "$INIT_SCRIPT" ] && {
		rc-update del zapret
		"$INIT_SCRIPT" stop
	}
	rm -f "$INIT_SCRIPT"
}
service_start_sysv()
{
	[ -x "$INIT_SCRIPT" ] && {
		echo \* starting zapret service
		"$INIT_SCRIPT" start || {
			echo could not start zapret service
			exitp 30
		}
	}
}
service_stop_sysv()
{
	[ -x "$INIT_SCRIPT" ] && {
		echo \* stopping zapret service
		"$INIT_SCRIPT" stop
	}
}
service_remove_sysv()
{
	echo \* removing zapret service

	[ -x "$INIT_SCRIPT" ] && {
		"$INIT_SCRIPT" disable
		"$INIT_SCRIPT" stop
	}
	rm -f "$INIT_SCRIPT"
}

check_kmod()
{
	[ -f "/lib/modules/$(uname -r)/$1.ko" ]
}
check_package_exists_openwrt()
{
	[ -n "$(opkg list $1)" ]
}
check_package_openwrt()
{
	[ -n "$(opkg list-installed $1)" ] && return 0
	local what="$(opkg whatprovides $1 | tail -n +2 | head -n 1)"
	[ -n "$what" ] || return 1
	[ -n "$(opkg list-installed $what)" ]
}
check_packages_openwrt()
{
	for pkg in $@; do
		check_package_openwrt $pkg || return
	done
}

install_openwrt_iface_hook()
{
	echo \* installing ifup hook
	
	ln -fs "$OPENWRT_IFACE_HOOK" /etc/hotplug.d/iface
}
remove_openwrt_iface_hook()
{
	echo \* removing ifup hook
	
	rm -f /etc/hotplug.d/iface/??-zapret
}
openwrt_fw_section_find()
{
	# $1 - fw include postfix
	# echoes section number
	
	i=0
	while true
	do
		path=$(uci -q get firewall.@include[$i].path)
		[ -n "$path" ] || break
		[ "$path" = "$OPENWRT_FW_INCLUDE$1" ] && {
	 		echo $i
	 		return 0
		}
		i=$(($i+1))
	done
	return 1
}
openwrt_fw_section_del()
{
	# $1 - fw include postfix

	local id="$(openwrt_fw_section_find $1)"
	[ -n "$id" ] && {
		uci delete firewall.@include[$id] && uci commit firewall
		rm -f "$OPENWRT_FW_INCLUDE$1"
	}
}
openwrt_fw_section_add()
{
	openwrt_fw_section_find ||
	{
		uci add firewall include >/dev/null || return
		echo -1
	}
}
openwrt_fw_section_configure()
{
	local id="$(openwrt_fw_section_add $1)"
	[ -z "$id" ] ||
	 ! uci set firewall.@include[$id].path="$OPENWRT_FW_INCLUDE" ||
	 ! uci set firewall.@include[$id].reload="1" ||
	 ! uci commit firewall &&
	{
		echo could not add firewall include
		exitp 50
	}
}
install_openwrt_firewall()
{
	echo \* installing firewall script $1
	
	[ -n "MODE" ] || {
		echo should specify MODE in $ZAPRET_CONFIG
		exitp 7
	}
	
	echo "linking : $FW_SCRIPT_SRC => $OPENWRT_FW_INCLUDE"
	ln -fs "$FW_SCRIPT_SRC" "$OPENWRT_FW_INCLUDE"
	
	openwrt_fw_section_configure $1
}
restart_openwrt_firewall()
{
	echo \* restarting firewall

	local FW=fw4
	[ -n "$OPENWRT_FW3" ] && FW=fw3
	$FW -q restart || {
		echo could not restart firewall $FW
		exitp 30
	}
}
remove_openwrt_firewall()
{
	echo \* removing firewall script
	
	openwrt_fw_section_del
	# from old zapret versions. now we use single include
	openwrt_fw_section_del 6
}

clear_ipset()
{
	echo "* clearing ipset(s)"

	# free some RAM
	"$IPSET_DIR/create_ipset.sh" clear
}


service_install_macos()
{
	echo \* installing zapret service

	ln -fs "$ZAPRET_BASE/init.d/macos/zapret.plist" /Library/LaunchDaemons
}
service_start_macos()
{
	echo \* starting zapret service

	"$INIT_SCRIPT_SRC" start
}
service_stop_macos()
{
	echo \* stopping zapret service

	"$INIT_SCRIPT_SRC" stop
}
service_remove_macos()
{
	echo \* removing zapret service

	rm -f /Library/LaunchDaemons/zapret.plist
	zapret_stop_daemons
}

remove_macos_firewall()
{
	echo \* removing zapret PF hooks

	pf_anchors_clear
	pf_anchors_del
	pf_anchor_root_del
	pf_anchor_root_reload
}

sedi()
{
	# MacOS doesnt support -i without parameter. busybox doesnt support -i with parameter.
	# its not possible to put "sed -i ''" to a variable and then use it
	if [ "$SYSTEM" = "macos" ]; then
		sed -i '' "$@"
	else
		sed -i "$@"
	fi
}

write_config_var()
{
	# $1 - mode var
	local M
	eval M="\$$1"

	if grep -q "^$1=\|^#$1=" "$ZAPRET_CONFIG"; then
		# replace / => \/
		#M=${M//\//\\\/}
		M=$(echo $M | sed 's/\//\\\//g')
		if [ -n "$M" ]; then
			if contains "$M" " "; then
				sedi -Ee "s/^#?$1=.*$/$1=\"$M\"/" "$ZAPRET_CONFIG"
			else
				sedi -Ee "s/^#?$1=.*$/$1=$M/" "$ZAPRET_CONFIG"
			fi
		else
			# write with comment at the beginning
			sedi -Ee "s/^#?$1=.*$/#$1=/" "$ZAPRET_CONFIG"
		fi
	else
		# var does not exist in config. add it
		if [ -n "$M" ]; then
			echo "$1=$M" >>"$ZAPRET_CONFIG"
		else
			echo "#$1=$M" >>"$ZAPRET_CONFIG"
		fi
	fi
}

check_prerequisites_linux()
{
	echo \* checking prerequisites

	local s cmd PKGS UTILS req="curl curl"
	case "$FWTYPE" in
		iptables)
			req="$req iptables iptables ip6tables iptables ipset ipset"
			;;
		nftables)
			req="$req nft nftables"
			;;
	esac

	PKGS=$(for s in $req; do echo $s; done |
		while read cmd; do
			read pkg
			exists $cmd || echo $pkg
		done | sort -u | xargs)
	UTILS=$(for s in $req; do echo $s; done |
		while read cmd; do
			read pkg
			echo $cmd
		done | sort -u | xargs)

	if [ -z "$PKGS" ] ; then
		echo required utilities exist : $UTILS
	else
		echo \* installing prerequisites

		echo packages required : $PKGS

		APTGET=$(whichq apt-get)
		YUM=$(whichq yum)
		PACMAN=$(whichq pacman)
		ZYPPER=$(whichq zypper)
		EOPKG=$(whichq eopkg)
		APK=$(whichq apk)
		if [ -x "$APTGET" ] ; then
			"$APTGET" update
			"$APTGET" install -y --no-install-recommends $PKGS dnsutils || {
				echo could not install prerequisites
				exitp 6
			}
		elif [ -x "$YUM" ] ; then
			"$YUM" -y install $PKGS || {
				echo could not install prerequisites
				exitp 6
			}
		elif [ -x "$PACMAN" ] ; then
			"$PACMAN" -Syy
			"$PACMAN" --noconfirm -S $PKGS || {
				echo could not install prerequisites
				exitp 6
			}
		elif [ -x "$ZYPPER" ] ; then
			"$ZYPPER" --non-interactive install $PKGS || {
				echo could not install prerequisites
				exitp 6
			}
		elif [ -x "$EOPKG" ] ; then
			"$EOPKG" -y install $PKGS || {
				echo could not install prerequisites
				exitp 6
			}
		elif [ -x "$APK" ] ; then
			"$APK" update
			# for alpine
			[ "$FWTYPE" = iptables ] && [ -n "$($APK list ip6tables)" ] && PKGS="$PKGS ip6tables"
			"$APK" add $PKGS || {
				echo could not install prerequisites
				exitp 6
			}
		else
			echo supported package manager not found
			echo you must manually install : $UTILS
			exitp 5
		fi
	fi
}

check_prerequisites_openwrt()
{
	echo \* checking prerequisites

	local PKGS="curl" UPD=0

	case "$FWTYPE" in
		iptables)
			PKGS="$PKGS ipset iptables iptables-mod-extra iptables-mod-nfqueue iptables-mod-filter iptables-mod-ipopt iptables-mod-conntrack-extra"
			[ "$DISABLE_IPV6" != "1" ] && PKGS="$PKGS ip6tables ip6tables-mod-nat ip6tables-extra"
			;;
		nftables)
			PKGS="$PKGS nftables kmod-nft-nat kmod-nft-offload kmod-nft-queue"
			;;
	esac

	if check_packages_openwrt $PKGS ; then
		echo everything is present
	else
		echo \* installing prerequisites

		opkg update
		UPD=1
		opkg install $PKGS || {
			echo could not install prerequisites
			exitp 6
		}
	fi
	
	is_linked_to_busybox gzip && {
		echo
		echo your system uses default busybox gzip. its several times slower than GNU gzip.
		echo ip/host list scripts will run much faster with GNU gzip
		echo installer can install GNU gzip but it requires about 100 Kb space
		if ask_yes_no N "do you want to install GNU gzip"; then
			[ "$UPD" = "0" ] && {
				opkg update
				UPD=1
			}
			opkg install --force-overwrite gzip
		fi
	}
	is_linked_to_busybox sort && {
		echo
		echo your system uses default busybox sort. its much slower and consumes much more RAM than GNU sort
		echo ip/host list scripts will run much faster with GNU sort
		echo installer can install GNU sort but it requires about 100 Kb space
		if ask_yes_no N "do you want to install GNU sort"; then
			[ "$UPD" = "0" ] && {
				opkg update
				UPD=1
			}
			opkg install --force-overwrite coreutils-sort
		fi
	}
	[ "$FSLEEP" = 0 ] && is_linked_to_busybox sleep && {
		echo
		echo no methods of sub-second sleep were found.
		echo if you want to speed up blockcheck install coreutils-sleep. it requires about 40 Kb space
		if ask_yes_no N "do you want to install COREUTILS sleep"; then
			[ "$UPD" = "0" ] && {
				opkg update
				UPD=1
			}
			opkg install --force-overwrite coreutils-sleep
			fsleep_setup
		fi
	}
}



select_ipv6()
{
	local T=N

	[ "$DISABLE_IPV6" != '1' ] && T=Y
	local old6=$DISABLE_IPV6
	echo
	if ask_yes_no $T "enable ipv6 support"; then
		DISABLE_IPV6=0
	else
		DISABLE_IPV6=1
	fi
	[ "$old6" != "$DISABLE_IPV6" ] && write_config_var DISABLE_IPV6
}
select_fwtype()
{
	echo
	[ $(get_ram_mb) -le 400 ] && {
		echo WARNING ! you are running a low RAM system
		echo WARNING ! nft requires lots of RAM to load huge ip sets, much more than ipsets require
		echo WARNING ! if you need large lists it may be necessary to fall back to iptables+ipset firewall
	}
	echo select firewall type :
	ask_list FWTYPE "iptables nftables" "$FWTYPE" && write_config_var FWTYPE
}