# this file is included from init scripts
# change values here

# can help in case /tmp has not enough space
#TMPDIR=/opt/zapret/tmp

# redefine user for zapret daemons. required on Keenetic
#WS_USER=nobody

# override firewall type : iptables,nftables,ipfw
#FWTYPE=iptables

# options for ipsets
# maximum number of elements in sets. also used for nft sets
SET_MAXELEM=522288
# too low hashsize can cause memory allocation errors on low RAM systems , even if RAM is enough
# too large hashsize will waste lots of RAM
IPSET_OPT="hashsize 262144 maxelem $SET_MAXELEM"
# dynamically generate additional ip. $1 = ipset/nfset/table name
#IPSET_HOOK="/etc/zapret.ipset.hook"

# options for ip2net. "-4" or "-6" auto added by ipset create script
IP2NET_OPT4="--prefix-length=22-30 --v4-threshold=3/4"
IP2NET_OPT6="--prefix-length=56-64 --v6-threshold=5"
# options for auto hostlist
AUTOHOSTLIST_RETRANS_THRESHOLD=3
AUTOHOSTLIST_FAIL_THRESHOLD=3
AUTOHOSTLIST_FAIL_TIME=60
# 1 = debug autohostlist positives to ipset/zapret-hosts-auto-debug.log
AUTOHOSTLIST_DEBUGLOG=0

# number of parallel threads for domain list resolves
MDIG_THREADS=30

# ipset/*.sh can compress large lists
GZIP_LISTS=1
# command to reload ip/host lists after update
# comment or leave empty for auto backend selection : ipset or ipfw if present
# on BSD systems with PF no auto reloading happens. you must provide your own command
# set to "-" to disable reload
#LISTS_RELOAD="pfctl -f /etc/pf.conf"

# override ports
#HTTP_PORTS=80-81,85
#HTTPS_PORTS=443,500-501
#QUIC_PORTS=443,444

# CHOOSE OPERATION MODE
# MODE : nfqws,tpws,tpws-socks,filter,custom
# nfqws : nfqws for dpi desync
# tpws : tpws transparent mode
# tpws-socks : tpws socks mode
# filter : no daemon, just create ipset or download hostlist
# custom : custom mode. should modify custom init script and add your own code
MODE=tpws
# apply fooling to http
MODE_HTTP=1
# for nfqws only. support http keep alives. enable only if DPI checks for http request in any outgoing packet
MODE_HTTP_KEEPALIVE=0
# apply fooling to https
MODE_HTTPS=1
# apply fooling to quic
MODE_QUIC=0
# none,ipset,hostlist,autohostlist
MODE_FILTER=none

# CHOOSE NFQWS DAEMON OPTIONS for DPI desync mode. run "nfq/nfqws --help" for option list
# SUFFIX VARS define additional lower priority desync profile. it's required if MODE_FILTER=hostlist and strategy has hostlist-incompatible 0-phase desync methods (syndata,wssize)
DESYNC_MARK=0x40000000
DESYNC_MARK_POSTNAT=0x20000000
NFQWS_OPT_DESYNC="--dpi-desync=fake --dpi-desync-ttl=0 --dpi-desync-ttl6=0 --dpi-desync-fooling=badsum"
#NFQWS_OPT_DESYNC_SUFFIX="--dpi-desync=syndata"
#NFQWS_OPT_DESYNC_HTTP=""
#NFQWS_OPT_DESYNC_HTTP_SUFFIX="--dpi-desync=syndata"
#NFQWS_OPT_DESYNC_HTTPS=""
#NFQWS_OPT_DESYNC_HTTPS_SUFFIX="--wssize 1:6"
#NFQWS_OPT_DESYNC_HTTP6=""
#NFQWS_OPT_DESYNC_HTTP6_SUFFIX="--dpi-desync=syndata"
#NFQWS_OPT_DESYNC_HTTPS6=""
#NFQWS_OPT_DESYNC_HTTPS6_SUFFIX="--wssize 1:6"
NFQWS_OPT_DESYNC_QUIC="--dpi-desync=fake --dpi-desync-repeats=6"
#NFQWS_OPT_DESYNC_QUIC_SUFFIX=""
#NFQWS_OPT_DESYNC_QUIC6="--dpi-desync=hopbyhop"
#NFQWS_OPT_DESYNC_QUIC6_SUFFIX=""

# CHOOSE TPWS DAEMON OPTIONS. run "tpws/tpws --help" for option list
# SUFFIX VARS define additional lower priority desync profile. it's required if MODE_FILTER=hostlist and strategy has hostlist-incompatible 0-phase desync methods (mss)
TPWS_OPT="--hostspell=HOST --split-http-req=method --split-pos=3 --oob"
#TPWS_OPT_SUFFIX="--mss 88"

# openwrt only : donttouch,none,software,hardware
FLOWOFFLOAD=donttouch

# openwrt: specify networks to be treated as LAN. default is "lan"
#OPENWRT_LAN="lan lan2 lan3"
# openwrt: specify networks to be treated as WAN. default wans are interfaces with default route
#OPENWRT_WAN4="wan vpn"
#OPENWRT_WAN6="wan6 vpn6"

# for routers based on desktop linux and macos. has no effect in openwrt.
# CHOOSE LAN and optinally WAN/WAN6 NETWORK INTERFACES
# or leave them commented if its not router
# it's possible to specify multiple interfaces like this : IFACE_LAN="eth0 eth1 eth2"
# if IFACE_WAN6 is not defined it take the value of IFACE_WAN
#IFACE_LAN=eth0
#IFACE_WAN=eth1
#IFACE_WAN6="ipsec0 wireguard0 he_net"

# should start/stop command of init scripts apply firewall rules ?
# not applicable to openwrt with firewall3+iptables
INIT_APPLY_FW=1
# firewall apply hooks
#INIT_FW_PRE_UP_HOOK="/etc/firewall.zapret.hook.pre_up"
#INIT_FW_POST_UP_HOOK="/etc/firewall.zapret.hook.post_up"
#INIT_FW_PRE_DOWN_HOOK="/etc/firewall.zapret.hook.pre_down"
#INIT_FW_POST_DOWN_HOOK="/etc/firewall.zapret.hook.post_down"

# do not work with ipv4
#DISABLE_IPV4=1
# do not work with ipv6
DISABLE_IPV6=1

# select which init script will be used to get ip or host list
# possible values : get_user.sh get_antizapret.sh get_combined.sh get_reestr.sh get_hostlist.sh
# comment if not required
GETLIST=get_antifilter_ipsmart.sh