zapret/common/nft.sh
2023-12-12 21:00:22 +03:00

709 lines
21 KiB
Bash

[ -n "$ZAPRET_NFT_TABLE" ] || ZAPRET_NFT_TABLE=zapret
# required for : nft -f -
create_dev_stdin
std_ports
nft_create_table()
{
nft add table inet $ZAPRET_NFT_TABLE
}
nft_del_table()
{
nft delete table inet $ZAPRET_NFT_TABLE 2>/dev/null
}
nft_list_table()
{
nft -t list table inet $ZAPRET_NFT_TABLE
}
nft_create_set()
{
# $1 - set name
# $2 - params
nft create set inet $ZAPRET_NFT_TABLE $1 "{ $2 }" 2>/dev/null
}
nft_del_set()
{
# $1 - set name
nft delete set inet $ZAPRET_NFT_TABLE $1
}
nft_flush_set()
{
# $1 - set name
nft flush set inet $ZAPRET_NFT_TABLE $1
}
nft_set_exists()
{
# $1 - set name
nft -t list set inet $ZAPRET_NFT_TABLE $1 2>/dev/null >/dev/null
}
nft_flush_chain()
{
# $1 - chain name
nft flush chain inet $ZAPRET_NFT_TABLE $1
}
nft_del_all_chains_from_table()
{
# $1 - table_name with or without family
# delete all chains with possible references to each other
# cannot just delete all in the list because of references
# avoid infinite loops
local chains deleted=1 error=1
while [ -n "$deleted" -a -n "$error" ]; do
chains=$(nft -t list table $1 2>/dev/null | sed -nre "s/^[ ]*chain ([^ ]+) \{/\1/p" | xargs)
[ -n "$chains" ] || break
deleted=
error=
for chain in $chains; do
if nft delete chain $1 $chain 2>/dev/null; then
deleted=1
else
error=1
fi
done
done
}
nft_create_chains()
{
# NOTE : postrouting hook has priority 99 to hook packets with original source but NATed destination
# NOTE : prerouting hook has priority -99 for the same reason
# NOTE : postnat is intended for hooks after NAT. many undersired things can happen. use with care. to activate set env POSTNAT=1
cat << EOF | nft -f -
add chain inet $ZAPRET_NFT_TABLE dnat_output { type nat hook output priority -101; }
flush chain inet $ZAPRET_NFT_TABLE dnat_output
add chain inet $ZAPRET_NFT_TABLE dnat_pre { type nat hook prerouting priority -101; }
flush chain inet $ZAPRET_NFT_TABLE dnat_pre
add chain inet $ZAPRET_NFT_TABLE forward { type filter hook forward priority -1; }
flush chain inet $ZAPRET_NFT_TABLE forward
add chain inet $ZAPRET_NFT_TABLE input { type filter hook input priority -1; }
flush chain inet $ZAPRET_NFT_TABLE input
add chain inet $ZAPRET_NFT_TABLE flow_offload
flush chain inet $ZAPRET_NFT_TABLE flow_offload
add chain inet $ZAPRET_NFT_TABLE localnet_protect
flush chain inet $ZAPRET_NFT_TABLE localnet_protect
add rule inet $ZAPRET_NFT_TABLE localnet_protect ip daddr $TPWS_LOCALHOST4 return comment "route_localnet allow access to tpws"
add rule inet $ZAPRET_NFT_TABLE localnet_protect ip daddr 127.0.0.0/8 drop comment "route_localnet remote access protection"
add rule inet $ZAPRET_NFT_TABLE input iif != lo jump localnet_protect
add chain inet $ZAPRET_NFT_TABLE postrouting { type filter hook postrouting priority 99; }
flush chain inet $ZAPRET_NFT_TABLE postrouting
add chain inet $ZAPRET_NFT_TABLE postnat { type filter hook postrouting priority 101; }
flush chain inet $ZAPRET_NFT_TABLE postnat
add chain inet $ZAPRET_NFT_TABLE prerouting { type filter hook prerouting priority -99; }
flush chain inet $ZAPRET_NFT_TABLE prerouting
add chain inet $ZAPRET_NFT_TABLE predefrag { type filter hook output priority -401; }
flush chain inet $ZAPRET_NFT_TABLE predefrag
add rule inet $ZAPRET_NFT_TABLE predefrag mark and $DESYNC_MARK !=0 ip frag-off != 0 notrack comment "do not track nfqws generated ipfrag packets to avoid nat tampering and defragmentation"
add rule inet $ZAPRET_NFT_TABLE predefrag mark and $DESYNC_MARK !=0 exthdr frag exists notrack comment "do not track nfqws generated ipfrag packets to avoid nat tampering and defragmentation"
add set inet $ZAPRET_NFT_TABLE lanif { type ifname; }
add set inet $ZAPRET_NFT_TABLE wanif { type ifname; }
add set inet $ZAPRET_NFT_TABLE wanif6 { type ifname; }
add map inet $ZAPRET_NFT_TABLE link_local { type ifname : ipv6_addr; }
EOF
[ -n "$POSTNAT_ALL" ] && {
nft_flush_chain predefrag
nft_add_rule predefrag mark and $DESYNC_MARK !=0 notrack comment \"do not track nfqws generated packets to avoid nat tampering and defragmentation\"
}
# unfortunately this approach breaks udp desync of the connection initiating packet (new, first one)
# however without notrack ipfrag will not work
# postrouting priority : 99 - before srcnat, 101 - after srcnat
# add chain inet $ZAPRET_NFT_TABLE predefrag { type filter hook output priority -401; }
# flush chain inet $ZAPRET_NFT_TABLE predefrag
# add rule inet $ZAPRET_NFT_TABLE predefrag mark and $DESYNC_MARK !=0 notrack comment "do not track nfqws generated packets to avoid nat tampering and defragmentation"
}
nft_del_chains()
{
# do not delete all chains because of additional user hooks
# they must be inside zapret table to use nfsets
cat << EOF | nft -f - 2>/dev/null
delete chain inet $ZAPRET_NFT_TABLE dnat_output
delete chain inet $ZAPRET_NFT_TABLE dnat_pre
delete chain inet $ZAPRET_NFT_TABLE forward
delete chain inet $ZAPRET_NFT_TABLE input
delete chain inet $ZAPRET_NFT_TABLE postrouting
delete chain inet $ZAPRET_NFT_TABLE postnat
delete chain inet $ZAPRET_NFT_TABLE prerouting
delete chain inet $ZAPRET_NFT_TABLE predefrag
delete chain inet $ZAPRET_NFT_TABLE flow_offload
delete chain inet $ZAPRET_NFT_TABLE localnet_protect
EOF
# unfortunately this approach breaks udp desync of the connection initiating packet (new, first one)
# delete chain inet $ZAPRET_NFT_TABLE predefrag
}
nft_del_flowtable()
{
nft delete flowtable inet $ZAPRET_NFT_TABLE ft 2>/dev/null
}
nft_create_or_update_flowtable()
{
# $1 = flags ('offload' for hw offload)
# $2,$3,$4,... - interfaces
# can be called multiple times to add interfaces. interfaces can only be added , not removed
local flags=$1 devices makelist
shift
# warning ! nft versions at least up to 1.0.1 do not allow interface names starting with digit in flowtable and do not allow quoting
# warning ! openwrt fixes this in post-21.x snapshots with special nft patch
# warning ! in traditional linux distros nft is unpatched and will fail with quoted interface definitions if unfixed
[ -n "$flags" ] && flags="flags $flags;"
for makelist in make_quoted_comma_list make_comma_list; do
$makelist devices "$@"
[ -n "$devices" ] && devices="devices={$devices};"
nft add flowtable inet $ZAPRET_NFT_TABLE ft "{ hook ingress priority -1; $flags $devices }" && break
done
}
nft_flush_ifsets()
{
cat << EOF | nft -f - 2>/dev/null
flush set inet $ZAPRET_NFT_TABLE lanif
flush set inet $ZAPRET_NFT_TABLE wanif
flush set inet $ZAPRET_NFT_TABLE wanif6
flush map inet $ZAPRET_NFT_TABLE link_local
EOF
}
nft_flush_link_local()
{
nft flush map inet $ZAPRET_NFT_TABLE link_local 2>/dev/null
}
nft_list_ifsets()
{
nft list set inet $ZAPRET_NFT_TABLE lanif
nft list set inet $ZAPRET_NFT_TABLE wanif
nft list set inet $ZAPRET_NFT_TABLE wanif6
nft list map inet $ZAPRET_NFT_TABLE link_local
nft list flowtable inet $ZAPRET_NFT_TABLE ft 2>/dev/null
}
nft_create_firewall()
{
nft_create_table
nft_del_flowtable
nft_flush_link_local
nft_create_chains
}
nft_del_firewall()
{
nft_del_chains
nft_del_flowtable
nft_flush_link_local
# leave ifsets and ipsets because they may be used by custom rules
}
nft_add_rule()
{
# $1 - chain
# $2,$3,... - rule(s)
local chain="$1"
shift
nft add rule inet $ZAPRET_NFT_TABLE $chain "$@"
}
nft_add_set_element()
{
# $1 - set or map name
# $2 - element
[ -z "$2" ] || nft add element inet $ZAPRET_NFT_TABLE $1 "{ $2 }"
}
nft_add_set_elements()
{
# $1 - set or map name
# $2,$3,... - element(s)
local set="$1" elements
shift
make_comma_list elements "$@"
nft_add_set_element $set "$elements"
}
nft_reverse_nfqws_rule()
{
echo "$@" | sed -e 's/oifname /iifname /g' -e 's/dport /sport /g' -e 's/daddr /saddr /g' -e 's/ct original /ct reply /g' -e "s/mark and $DESYNC_MARK == 0//g"
}
nft_clean_nfqws_rule()
{
echo "$@" | sed -e "s/mark and $DESYNC_MARK == 0//g" -e "s/oifname @wanif6//g" -e "s/oifname @wanif//g"
}
nft_add_nfqws_flow_exempt_rule()
{
# $1 - rule (must be all filters in one var)
nft_add_rule flow_offload $(nft_clean_nfqws_rule $1) return comment \"direct flow offloading exemption\"
# do not need this because of oifname @wanif/@wanif6 filter in forward chain
#nft_add_rule flow_offload $(nft_reverse_nfqws_rule $1) return comment \"reverse flow offloading exemption\"
}
nft_add_flow_offload_exemption()
{
# "$1" - rule for ipv4
# "$2" - rule for ipv6
# "$3" - comment
[ "$DISABLE_IPV4" = "1" -o -z "$1" ] || nft_add_rule flow_offload oifname @wanif $1 ip daddr != @nozapret return comment \"$3\"
[ "$DISABLE_IPV6" = "1" -o -z "$2" ] || nft_add_rule flow_offload oifname @wanif6 $2 ip6 daddr != @nozapret6 return comment \"$3\"
}
nft_hw_offload_supported()
{
# $1,$2,... - interface names
local devices res=1
make_quoted_comma_list devices "$@"
[ -n "$devices" ] && devices="devices={$devices};"
nft add table ${ZAPRET_NFT_TABLE}_test && nft add flowtable ${ZAPRET_NFT_TABLE}_test ft "{ flags offload; $devices }" 2>/dev/null && res=0
nft delete table ${ZAPRET_NFT_TABLE}_test 2>/dev/null
return $res
}
nft_hw_offload_find_supported()
{
# $1,$2,... - interface names
local supported_list
while [ -n "$1" ]; do
nft_hw_offload_supported "$1" && append_separator_list supported_list ' ' '' "$1"
shift
done
echo $supported_list
}
nft_apply_flow_offloading()
{
# ft can be absent
nft_add_rule flow_offload meta l4proto "{ tcp, udp }" flow add @ft 2>/dev/null && {
nft_add_rule flow_offload meta l4proto "{ tcp, udp }" counter comment \"if offload works here must not be too much traffic\"
# allow only outgoing packets to initiate flow offload
nft_add_rule forward oifname @wanif jump flow_offload
nft_add_rule forward oifname @wanif6 jump flow_offload
}
}
nft_filter_apply_port_target()
{
# $1 - var name of nftables filter
local f
if [ "$MODE_HTTP" = "1" ] && [ "$MODE_HTTPS" = "1" ]; then
f="tcp dport {$HTTP_PORTS,$HTTPS_PORTS}"
elif [ "$MODE_HTTPS" = "1" ]; then
f="tcp dport {$HTTPS_PORTS}"
elif [ "$MODE_HTTP" = "1" ]; then
f="tcp dport {$HTTP_PORTS}"
else
echo WARNING !!! HTTP and HTTPS are both disabled
fi
eval $1="\"\$$1 $f\""
}
nft_filter_apply_port_target_quic()
{
# $1 - var name of nftables filter
local f
f="udp dport {$QUIC_PORTS}"
eval $1="\"\$$1 $f\""
}
nft_filter_apply_ipset_target4()
{
# $1 - var name of ipv4 nftables filter
if [ "$MODE_FILTER" = "ipset" ]; then
eval $1="\"\$$1 ip daddr @zapret\""
fi
}
nft_filter_apply_ipset_target6()
{
# $1 - var name of ipv6 nftables filter
if [ "$MODE_FILTER" = "ipset" ]; then
eval $1="\"\$$1 ip6 daddr @zapret6\""
fi
}
nft_filter_apply_ipset_target()
{
# $1 - var name of ipv4 nftables filter
# $2 - var name of ipv6 nftables filter
nft_filter_apply_ipset_target4 $1
nft_filter_apply_ipset_target6 $2
}
nft_script_add_ifset_element()
{
# $1 - set name
# $2 - space separated elements
local elements
[ -n "$2" ] && {
make_quoted_comma_list elements $2
script="${script}
add element inet $ZAPRET_NFT_TABLE $1 { $elements }"
}
}
nft_fill_ifsets()
{
# $1 - space separated lan interface names
# $2 - space separated wan interface names
# $3 - space separated wan6 interface names
# 4,5,6 is needed for pppoe+openwrt case. looks like it's not easily possible to resolve ethernet device behind a pppoe interface
# $4 - space separated lan physical interface names (optional)
# $5 - space separated wan physical interface names (optional)
# $6 - space separated wan6 physical interface names (optional)
local script i j ALLDEVS devs
# if large sets exist nft works very ineffectively
# looks like it analyzes the whole table blob to find required data pieces
# calling all in one shot helps not to waste cpu time many times
script="flush set inet $ZAPRET_NFT_TABLE wanif
flush set inet $ZAPRET_NFT_TABLE wanif6
flush set inet $ZAPRET_NFT_TABLE lanif"
[ "$DISABLE_IPV4" = "1" ] || nft_script_add_ifset_element wanif "$2"
[ "$DISABLE_IPV6" = "1" ] || nft_script_add_ifset_element wanif6 "$3"
nft_script_add_ifset_element lanif "$1"
echo "$script" | nft -f -
case "$FLOWOFFLOAD" in
software)
ALLDEVS=$(unique $1 $2 $3)
# unbound flowtable may cause error in older nft version
nft_create_or_update_flowtable '' $ALLDEVS 2>/dev/null
;;
hardware)
ALLDEVS=$(unique $1 $2 $3 $4 $5 $6)
# first create unbound flowtable. may cause error in older nft version
nft_create_or_update_flowtable 'offload' 2>/dev/null
# then add elements. some of them can cause error because unsupported
for i in $ALLDEVS; do
if nft_hw_offload_supported $i; then
nft_create_or_update_flowtable 'offload' $i
else
# bridge members must be added instead of the bridge itself
# some members may not support hw offload. example : lan1 lan2 lan3 support, wlan0 wlan1 - not
devs=$(resolve_lower_devices $i)
for j in $devs; do
# do not display error if addition failed
nft_create_or_update_flowtable 'offload' $j 2>/dev/null
done
fi
done
;;
esac
}
nft_only()
{
linux_fwtype
case "$FWTYPE" in
nftables)
"$@"
;;
esac
}
nft_print_op()
{
echo "Adding nftables ipv$3 rule for $2 : $1"
}
_nft_fw_tpws4()
{
# $1 - filter ipv4
# $2 - tpws port
# $3 - not-empty if wan interface filtering required
[ "$DISABLE_IPV4" = "1" -o -z "$1" ] || {
local filter="$1" port="$2"
nft_print_op "$filter" "tpws (port $2)" 4
nft_add_rule dnat_output skuid != $WS_USER ${3:+oifname @wanif }$filter ip daddr != @nozapret dnat ip to $TPWS_LOCALHOST4:$port
nft_add_rule dnat_pre iifname @lanif $filter ip daddr != @nozapret dnat ip to $TPWS_LOCALHOST4:$port
prepare_route_localnet
}
}
_nft_fw_tpws6()
{
# $1 - filter ipv6
# $2 - tpws port
# $3 - lan interface names space separated
# $4 - not-empty if wan interface filtering required
[ "$DISABLE_IPV6" = "1" -o -z "$1" ] || {
local filter="$1" port="$2" DNAT6 i
nft_print_op "$filter" "tpws (port $port)" 6
nft_add_rule dnat_output skuid != $WS_USER ${4:+oifname @wanif6 }$filter ip6 daddr != @nozapret6 dnat ip6 to [::1]:$port
[ -n "$3" ] && {
nft_add_rule dnat_pre $filter ip6 daddr != @nozapret6 dnat ip6 to iifname map @link_local:$port
for i in $3; do
_dnat6_target $i DNAT6
# can be multiple tpws processes on different ports
[ -n "$DNAT6" -a "$DNAT6" != '-' ] && nft_add_set_element link_local "$i : $DNAT6"
done
}
}
}
nft_fw_tpws()
{
# $1 - filter ipv4
# $2 - filter ipv6
# $3 - tpws port
nft_fw_tpws4 "$1" $3
nft_fw_tpws6 "$2" $3
}
get_postchain()
{
if [ "$POSTNAT" = 1 -o "$POSTNAT_ALL" = 1 ] ; then
echo -n postnat
else
echo -n postrouting
fi
}
_nft_fw_nfqws_post4()
{
# $1 - filter ipv4
# $2 - queue number
# $3 - not-empty if wan interface filtering required
[ "$DISABLE_IPV4" = "1" -o -z "$1" ] || {
local filter="$1" port="$2" rule
nft_print_op "$filter" "nfqws postrouting (qnum $port)" 4
rule="${3:+oifname @wanif }$filter ip daddr != @nozapret"
nft_add_rule $(get_postchain) $rule queue num $port bypass
nft_add_nfqws_flow_exempt_rule "$rule"
}
}
_nft_fw_nfqws_post6()
{
# $1 - filter ipv6
# $2 - queue number
# $3 - not-empty if wan interface filtering required
[ "$DISABLE_IPV6" = "1" -o -z "$1" ] || {
local filter="$1" port="$2" rule
nft_print_op "$filter" "nfqws postrouting (qnum $port)" 6
rule="${3:+oifname @wanif6 }$filter ip6 daddr != @nozapret6"
nft_add_rule $(get_postchain) $rule queue num $port bypass
nft_add_nfqws_flow_exempt_rule "$rule"
}
}
nft_fw_nfqws_post()
{
# $1 - filter ipv4
# $2 - filter ipv6
# $3 - queue number
nft_fw_nfqws_post4 "$1" $3
nft_fw_nfqws_post6 "$2" $3
}
_nft_fw_nfqws_pre4()
{
# $1 - filter ipv4
# $2 - queue number
# $3 - not-empty if wan interface filtering required
[ "$DISABLE_IPV4" = "1" -o -z "$1" ] || {
local filter="$1" port="$2" rule
nft_print_op "$filter" "nfqws prerouting (qnum $port)" 4
rule="${3:+iifname @wanif }$filter ip saddr != @nozapret"
nft_add_rule prerouting $rule queue num $port bypass
}
}
_nft_fw_nfqws_pre6()
{
# $1 - filter ipv6
# $2 - queue number
# $3 - not-empty if wan interface filtering required
[ "$DISABLE_IPV6" = "1" -o -z "$1" ] || {
local filter="$1" port="$2" rule
nft_print_op "$filter" "nfqws prerouting (qnum $port)" 6
rule="${3:+iifname @wanif6 }$filter ip6 saddr != @nozapret6"
nft_add_rule prerouting $rule queue num $port bypass
}
}
nft_fw_nfqws_pre()
{
# $1 - filter ipv4
# $2 - filter ipv6
# $3 - queue number
nft_fw_nfqws_pre4 "$1" $3
nft_fw_nfqws_pre6 "$2" $3
}
nft_fw_nfqws_both4()
{
# $1 - filter ipv4
# $2 - queue number
nft_fw_nfqws_post4 "$@"
nft_fw_nfqws_pre4 "$(nft_reverse_nfqws_rule $1)" $2
}
nft_fw_nfqws_both6()
{
# $1 - filter ipv6
# $2 - queue number
nft_fw_nfqws_post6 "$@"
nft_fw_nfqws_pre6 "$(nft_reverse_nfqws_rule $1)" $2
}
nft_fw_nfqws_both()
{
# $1 - filter ipv4
# $2 - filter ipv6
# $3 - queue number
nft_fw_nfqws_both4 "$1" "$3"
nft_fw_nfqws_both6 "$2" "$3"
}
zapret_reload_ifsets()
{
nft_only nft_create_table ; nft_fill_ifsets_overload
return 0
}
zapret_list_ifsets()
{
nft_only nft_list_ifsets
return 0
}
zapret_list_table()
{
nft_only nft_list_table
return 0
}
zapret_apply_firewall_rules_nft()
{
local mode="${MODE_OVERRIDE:-$MODE}"
local first_packet_only
local desync="mark and $DESYNC_MARK == 0"
local f4 f6 ff qn qns qn6 qns6
# autohostlist mode requires incoming traffic sample
# always use conntrack packet limiter or nfqws will deal with gigabytes
if [ "$MODE_FILTER" = "autohostlist" ]; then
first_packet_only=$((6+${AUTOHOSTLIST_RETRANS_THRESHOLD:-3}))
else
first_packet_only=6
fi
first_packet_only="ct original packets 1-$first_packet_only"
case "$mode" in
tpws)
if [ ! "$MODE_HTTP" = "1" ] && [ ! "$MODE_HTTPS" = "1" ]; then
echo both http and https are disabled. not applying redirection.
else
nft_filter_apply_port_target f4
f6=$f4
nft_filter_apply_ipset_target f4 f6
nft_fw_tpws "$f4" "$f6" $TPPORT
fi
;;
nfqws)
# quite complex but we need to minimize nfqws processes to save RAM
get_nfqws_qnums qn qns qn6 qns6
if [ "$MODE_HTTP_KEEPALIVE" != "1" ] && [ -n "$qn" ] && [ "$qn" = "$qns" ]; then
nft_filter_apply_port_target f4
f4="$f4 $first_packet_only"
nft_filter_apply_ipset_target4 f4
nft_fw_nfqws_post4 "$f4 $desync" $qn
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre4 "$(nft_reverse_nfqws_rule $f4)" $qn
else
if [ -n "$qn" ]; then
f4="tcp dport {$HTTP_PORTS}"
ff="$f4"
[ "$MODE_HTTP_KEEPALIVE" = "1" ] || f4="$f4 $first_packet_only"
ff="$ff $first_packet_only"
nft_filter_apply_ipset_target4 f4
nft_filter_apply_ipset_target4 ff
nft_fw_nfqws_post4 "$f4 $desync" $qn
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre4 "$(nft_reverse_nfqws_rule $ff)" $qn
fi
if [ -n "$qns" ]; then
f4="tcp dport {$HTTPS_PORTS} $first_packet_only"
nft_filter_apply_ipset_target4 f4
nft_fw_nfqws_post4 "$f4 $desync" $qns
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre4 "$(nft_reverse_nfqws_rule $f4)" $qns
fi
fi
if [ "$MODE_HTTP_KEEPALIVE" != "1" ] && [ -n "$qn6" ] && [ "$qn6" = "$qns6" ]; then
nft_filter_apply_port_target f6
f6="$f6 $first_packet_only"
nft_filter_apply_ipset_target6 f6
nft_fw_nfqws_post6 "$f6 $desync" $qn6
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre6 "$(nft_reverse_nfqws_rule $f6)" $qn
else
if [ -n "$qn6" ]; then
f6="tcp dport {$HTTP_PORTS}"
ff="$f6"
[ "$MODE_HTTP_KEEPALIVE" = "1" ] || f6="$f6 $first_packet_only"
ff="$ff $first_packet_only"
nft_filter_apply_ipset_target6 f6
nft_filter_apply_ipset_target6 ff
nft_fw_nfqws_post6 "$f6 $desync" $qn6
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre6 "$(nft_reverse_nfqws_rule $ff)" $qn6
fi
if [ -n "$qns6" ]; then
f6="tcp dport {$HTTPS_PORTS} $first_packet_only"
nft_filter_apply_ipset_target6 f6
nft_fw_nfqws_post6 "$f6 $desync" $qns6
[ "$MODE_FILTER" = "autohostlist" ] && nft_fw_nfqws_pre6 "$(nft_reverse_nfqws_rule $f6)" $qns6
fi
fi
get_nfqws_qnums_quic qn qn6
if [ -n "$qn" ]; then
f4=
nft_filter_apply_port_target_quic f4
f4="$f4 $first_packet_only"
nft_filter_apply_ipset_target4 f4
nft_fw_nfqws_post4 "$f4 $desync" $qn
fi
if [ -n "$qn6" ]; then
f6=
nft_filter_apply_port_target_quic f6
f6="$f6 $first_packet_only"
nft_filter_apply_ipset_target6 f6
nft_fw_nfqws_post6 "$f6 $desync" $qn6
fi
;;
custom)
existf zapret_custom_firewall_nft && zapret_custom_firewall_nft
;;
esac
}
zapret_apply_firewall_nft()
{
echo Applying nftables
local mode="${MODE_OVERRIDE:-$MODE}"
[ "$mode" = "tpws-socks" ] && return 0
create_ipset no-update
nft_create_firewall
nft_fill_ifsets_overload
zapret_apply_firewall_rules_nft
[ "$FLOWOFFLOAD" = 'software' -o "$FLOWOFFLOAD" = 'hardware' ] && nft_apply_flow_offloading
return 0
}
zapret_unapply_firewall_nft()
{
echo Clearing nftables
unprepare_route_localnet
nft_del_firewall
return 0
}
zapret_do_firewall_nft()
{
# $1 - 1 - add, 0 - del
if [ "$1" = 0 ] ; then
zapret_unapply_firewall_nft
else
zapret_apply_firewall_nft
fi
return 0
}