Merge branch 'restruction'

Succesful restruction

.gitignore

@@ -2,6 +2,7 @@ __pycache__
 build/
 logs/
 storage/
+env/
 *.gz
 *.xz
 *.fls

TODO.md

@@ -1,56 +0,0 @@
-## Usefull utils
-- createPatch
-- polyDualMesh
-- fvSolution: cellLimited
-- collapseDict: collapseEdges
-- renumberMesh
-- processorField
-
-## Errors
-- salome:
-
-th. 139990926538304 - 
-Trace /volatile/salome/jenkins/workspace/Salome_master_CO7/SALOME-9.6.0-CO7/SOURCES/SMESH/src/SMESH/SMESH_subMesh.cxx [2005] : 
-NETGEN_2D3D failed on sub-shape #1 with error COMPERR_BAD_INPUT_MESH 
-"NgException at Volume meshing: Stop meshing since surface mesh not consistent Some edges multiple times in surface mesh"
-
-th. 140588498282048 - 
-Trace /volatile/salome/jenkins/workspace/Salome_master_CO7/SALOME-9.6.0-CO7/SOURCES/SMESH/src/SMESH/SMESH_subMesh.cxx [2005] : 
-NETGEN_2D3D failed on sub-shape #47 with error COMPERR_WARNING 
-"Thickness 0.001 of viscous layers not reached, average reached thickness is 0.000928207"
-
-th. 139986338838080 - 
-Trace /volatile/salome/jenkins/workspace/Salome_master_CO7/SALOME-9.6.0-CO7/SOURCES/SMESH/src/SMESH/SMESH_subMesh.cxx [2005] : 
-NETGEN_2D3D failed on sub-shape #1 with error COMPERR_BAD_INPUT_MESH 
-"NgException at Volume meshing: Stop meshing since boundary mesh is overlapping Intersecting triangles"
-
-
-## 1.03.21
-- [x] boundary type (wall or symetryPlane)
-- [x] restruct for ways
-- [x] build alpha = 0.01 .. 0.13
-- [x] ! symetryPlane -> cyclicAMI
-
-## 3.03.21
-- [x] configure salome server, ports, etc.
-- [ ] less processes for salome, optimization.
-
-## 4.03.21
-- [x] 3rd direction
-- [x] createPatch(Dict)
-- [ ] views (mesh, ..)
-- [x] alpha for simpleCubic [0.01 .. 0.28]
-- [x] translation vector (cyclicAMI)
-- [ ] BUG: angle between the direction vector and the normal to inlet is ~1.4e-14 
-    - [x] Another solution
-- [ ] BUG: ideasUnvToFoam not working with param '-case PATH'
-    - [x] Temporary sulution via os.chdir(PATH)
-
-## 6.03.21
-- [ ] ERROR: MakeFuseList with alpha > 0.2
-
-## 7.03.21
-- [x] Split the symetryPlane to 4 faces
-
-## 11.03.21
-- [x] Dual test for cyclicAMI

anisotropy/anisotropy.py

@@ -1,38 +1,48 @@
 import os, sys
-from collections import namedtuple
 import time
-import logging
 from datetime import timedelta
-import multiprocessing
 import shutil
 
-import config
-from config import logger
-#from src import applogger
-from src import utils
-from src import salome_utils
-from src import foam_utils
+ROOT = "/".join(__file__.split("/")[:-2])
+sys.path.append(os.path.abspath(ROOT))
 
+from utils import struct
+import toml
+import logging
+
+CONFIG = os.path.join(ROOT, "conf/config.toml")
+config = struct(toml.load(CONFIG))
+
+
+    #CONFIG = os.path.abspath("../conf/config.toml")
+    #config = struct(toml.load(CONFIG))
+    
+LOG = os.path.join(ROOT, "logs")
+if not os.path.exists(LOG):
+    os.makedirs(LOG)
+
+BUILD = os.path.join(ROOT, "build")
+if not os.path.exists(BUILD):
+    os.makedirs(BUILD)
+
+logging.basicConfig(
+    level = logging.INFO,
+    format = config.logger.format,
+    handlers = [
+        logging.StreamHandler(),
+        logging.FileHandler(f"{ LOG }/{ config.logger.name }.log")
+    ]
+)
+logger = logging.getLogger(config.logger.name)
 
 def main():
-    if not os.path.exists(config.LOG):
-        os.makedirs(config.LOG)
-
-    if not os.path.exists(config.BUILD):
-        os.makedirs(config.BUILD)
-
-    #global logger 
-    #logger = applogger.Logger()
-
-    check = checkEnv()
-
-    if check:
+    if checkEnv():
         return
 
     tasks = createTasks()
 
     for task in tasks:
-        logger.fancyline()
+        logger.info("-" * 80)
         logger.info(f"""main:
         task:\t{tasks.index(task) + 1} / {len(tasks)}
         cpu count:\t{os.cpu_count()}
@@ -55,7 +65,7 @@ def main():
         if not returncode:
             task.flow = True
 
-        with open(os.path.join(config.LOG, "tasks.log"), "a") as io:
+        with open(os.path.join(LOG, "tasks.log"), "a") as io:
             idx = tasks.index(task)
             io.write(f"""Task {idx}:
     structure:\t{task.structure}
@@ -65,67 +75,34 @@ def main():
     flow:\t{task.flow}\n""")
 
 
-    logger.info(f"Warnings: {logger.warnings}\tErrors: {logger.errors}")
-
-
-def checkEnv():
-    missed = False
-    
-    try:
-        pythonVersion = "Python {}".format(sys.version.split(" ")[0])
-        salomeVersion = salome_utils.salomeVersion()
-        foamVersion = foam_utils.foamVersion()
-
-    except Exception:
-        logger.critical("Missed environment")
-        missed = True
-
-    else:
-        logger.info(f"environment:\n\t{pythonVersion}\n\t{salomeVersion}\n\t{foamVersion}")
-
-    finally:
-        return missed
-
-
-class Task:
-    def __init__(self, **kwargs):
-        for (k, v) in kwargs.items():
-            setattr(self, k, v)
+    #logger.info(f"Warnings: {logger.warnings}\tErrors: {logger.errors}")
 
 
 def createTasks():
-    #Task = namedtuple("Task", ["structure", "theta", "fillet", "direction", "export"])
     tasks = []
-    structures = [ getattr(config, s)() for s in config.structures ]
 
-    for structure in structures:
-        for direction in structure.directions:
-            for theta in structure.theta:
-                name = type(structure).__name__
-                export = os.path.join(
-                    config.BUILD, 
-                    name,
-                    "direction-{}{}{}".format(*direction),
-                    "theta-{}".format(theta)
-                )
+    for structure in config.base.__dict__.keys():
+        if getattr(config.base, structure):
+            for direction in getattr(config, structure).geometry.directions:
+                for theta in getattr(config, structure).theta:
+                    task = struct(
+                        structure = structure, 
+                        theta = theta, 
+                        fillet = getattr(config, structure).geometry.fillet, 
+                        direction = direction, 
+                        export = os.path.join(ROOT, f"{ BUILD }/{ structure }/direction-{ direction[0] }{ direction [1] }{ direction [2] }/theta-{ theta }"),
+                        mesh = False,
+                        flow = False
+                    )
 
-                task = Task(
-                    structure = name, 
-                    theta = theta, 
-                    fillet = structure.fillet, 
-                    direction = direction, 
-                    export = export,
-                    mesh = False,
-                    flow = False
-                )
-
-                tasks.append(task)
+                    tasks.append(task)
 
     return tasks
 
+from salomepl.utils import runExecute, salomeVersion
 
 def createMesh(task):
-    scriptpath = os.path.join(config.ROOT, "samples/__init__.py")
+    scriptpath = os.path.join(ROOT, "salomepl/genmesh.py")
     port = 2810
     stime = time.monotonic()
 
@@ -135,23 +112,25 @@ def createMesh(task):
         int(task.fillet), 
         "".join([str(coord) for coord in task.direction]), 
         os.path.join(task.export, "mesh.unv"),
-        config.ROOT
+        ROOT
     )
-    returncode = salome_utils.runExecute(port, scriptpath, *args)
+    returncode = runExecute(port, scriptpath, *args)
     
     etime = time.monotonic()
     logger.info("createMesh: elapsed time: {}".format(timedelta(seconds = etime - stime)))
 
 
+import openfoam
+
 def calculate(task):
     foamCase = [ "0", "constant", "system" ]
 
     os.chdir(task.export)
-    foam_utils.foamClean()
+    openfoam.foamClean()
 
     for d in foamCase:
         shutil.copytree(
-            os.path.join(config.ROOT, "src/cubicFoam", d), 
+            os.path.join(ROOT, "openfoam/template", d), 
             os.path.join(task.export, d)
         )
     
@@ -161,42 +140,62 @@ def calculate(task):
         logger.critical(f"calculate: missed 'mesh.unv'")
         return
 
-    _, returncode = foam_utils.ideasUnvToFoam("mesh.unv")
+    _, returncode = openfoam.ideasUnvToFoam("mesh.unv")
 
     if returncode:
         os.chdir(config.ROOT)
 
         return returncode
     
-    foam_utils.createPatch(dictfile = "system/createPatchDict.symetry")
+    openfoam.createPatch(dictfile = "system/createPatchDict.symetry")
 
-    foam_utils.foamDictionary("constant/polyMesh/boundary", "entry0.defaultFaces.type", "wall")
-    foam_utils.foamDictionary("constant/polyMesh/boundary", "entry0.defaultFaces.inGroups", "1 (wall)")
+    openfoam.foamDictionary("constant/polyMesh/boundary", "entry0.defaultFaces.type", "wall")
+    openfoam.foamDictionary("constant/polyMesh/boundary", "entry0.defaultFaces.inGroups", "1 (wall)")
     
-    foam_utils.checkMesh()
+    openfoam.checkMesh()
 
     scale = (1e-5, 1e-5, 1e-5)
-    foam_utils.transformPoints(scale)
+    openfoam.transformPoints(scale)
     
-    foam_utils.decomposePar()
+    openfoam.decomposePar()
 
-    foam_utils.renumberMesh()
+    openfoam.renumberMesh()
     
-    foam_utils.potentialFoam()
+    openfoam.potentialFoam()
     
     for n in range(os.cpu_count()):
-        foam_utils.foamDictionary(f"processor{n}/0/U", "boundaryField.inlet.type", "pressureInletVelocity")
-        foam_utils.foamDictionary(f"processor{n}/0/U", "boundaryField.inlet.value", "uniform (0 0 0)")
+        openfoam.foamDictionary(f"processor{n}/0/U", "boundaryField.inlet.type", "pressureInletVelocity")
+        openfoam.foamDictionary(f"processor{n}/0/U", "boundaryField.inlet.value", "uniform (0 0 0)")
     
-    returncode = foam_utils.simpleFoam()
+    returncode, out = openfoam.simpleFoam()
+    if out:
+        logger.info(out)
 
-    os.chdir(config.ROOT)
+    os.chdir(ROOT)
     
     etime = time.monotonic()
     logger.info("calculate: elapsed time: {}".format(timedelta(seconds = etime - stime)))
 
     return returncode
 
+def checkEnv():
+    missed = False
+    
+    try:
+        pythonVersion = "Python {}".format(sys.version.split(" ")[0])
+        salomeplVersion = salomeVersion()
+        openfoamVersion = openfoam.foamVersion()
+
+    except Exception as e:
+        logger.critical("Missed environment %s", e)
+        missed = True
+
+    else:
+        logger.info(f"environment:\n\t{pythonVersion}\n\t{salomeplVersion}\n\t{openfoamVersion}")
+
+    finally:
+        return missed
+
 
 def postprocessing(tasks):
 
@@ -223,4 +222,3 @@ def postprocessing(tasks):
 if __name__ == "__main__":
     main()
 
-

anisotropy/utils.py

@@ -0,0 +1,153 @@
+import logging
+
+from multiprocessing import Queue, Process, cpu_count
+import socket
+
+
+class struct:
+    def __init__(self, *args, **kwargs):
+        if len(args) > 0:
+            if type(args[0]) == dict:
+                for (k, v) in args[0].items():
+                    if type(v) == dict:
+                        setattr(self, k, struct(v))
+                    else:
+                        setattr(self, k, v)
+        else:
+            for (k, v) in kwargs.items():
+                setattr(self, k, v)
+
+    def __str__(self):
+        members = []
+
+        for key in self.__dict__.keys():
+            members.append(f"{ key } = ")
+
+            if type(self.__dict__[key]) == str:
+                members[len(members) - 1] += f"\"{ self.__dict__[key] }\""
+
+            else: 
+                members[len(members) - 1] += f"{ self.__dict__[key] }"
+             
+        return f"struct({', '.join(members)})"
+
+    def __repr__(self):
+        return str(self)
+
+
+class Logger:
+    def __init__(self, name, logpath):
+        logging.basicConfig(
+            level = logging.INFO, 
+            format = "%(levelname)s: %(message)s",
+            handlers = [
+                logging.StreamHandler(),
+                logging.FileHandler(logpath)
+            ]
+        )
+
+        self.logger = logging.getLogger(name)
+        self.warnings = 0
+        self.errors = 0
+        self.criticals = 0
+        self.exceptions = 0
+        
+    def info(self, *args):
+        self.logger.info(*args)
+
+    def warning(self, *args):
+        self.warnings += 1
+        self.logger.warning(*args)
+
+    def error(self, *args):
+        self.errors += 1
+        self.logger.error(*args)
+
+    def critical(self, *args):
+        self.criticals += 1
+        self.logger.critical(*args)
+
+    def exception(self, *args):
+        self.exceptions += 1
+        self.logger.exception(*args)
+
+    def fancyline(self):
+        self.logger.info("-" * 80)
+
+
+
+def queue(cmd, qin, qout, *args):
+    
+    while True:
+        # Get item from the queue
+        pos, var = qin.get()
+        
+        # Exit point 
+        if pos is None:
+            break
+
+        # Execute command
+        res = cmd(*var, *args)
+
+        # Put results to the queue
+        qout.put((pos, res))
+
+    return
+
+
+def parallel(np, var, cmd):
+
+    varcount = len(var)
+
+    processes = []
+    nprocs = np if np <= cpu_count() else cpu_count()
+    
+    qin = Queue(1)
+    qout = Queue()
+    
+    logging.info("cpu count: {}".format(np))
+    logging.info("var: {}".format(var))
+    logging.info("cmd: {}".format(cmd))
+
+    # Create processes
+    for n in range(nprocs):
+        pargs = [cmd, qin, qout]
+
+        p = Process(target = queue, args = tuple(pargs))
+
+        processes.append(p)
+    
+    # Start processes
+    for p in processes:
+        p.daemon = True
+        p.start()
+
+    # Fill queue
+    for n in range(varcount):
+        qin.put((n, var[n]))
+
+    for _ in range(nprocs):
+        qin.put((None, None))
+    
+    # Get results
+    results = [[] for n in range(varcount)]
+
+    for n in range(varcount):
+        index, res = qout.get()
+        
+        results[index] = res
+    
+    # Wait until each processor has finished
+    for p in processes:
+        p.join()
+
+    return results
+
+    
+def portIsFree(address, port):
+
+    with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
+        return s.connect_ex((address, port)) == 0
+
+
+

bin/anisotropy

@@ -0,0 +1,50 @@
+#!/usr/bin/env bash
+DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )/.."
+cd ${DIR}
+
+anisotropy-help()
+{
+    echo "Usage:"
+    echo "    anisotropy <command> [options]"
+    echo ""
+    echo "Commands:"
+    echo "    clean     Clean project directory via git (.gitignore)."
+    echo "    init      Activate environment and install dependencies."
+    echo "    run       Start calculations and etc."
+    echo "    help      Show help for commands."
+    echo ""
+    echo "Options:"
+    echo "    -c, --config <path-to-file>   Use custom configuration file."
+}
+
+case $1 in
+    clean)
+        git clean -fdx
+        ;;
+
+    init)
+        python -m venv env
+        source env/bin/activate
+        python -m pip install --upgrade pip
+        python -m pip install -r requirements.txt
+        deactivate
+        ;;
+
+    run)
+        source ${OPENFOAM}
+        source env/bin/activate
+        python ${DIR}/anisotropy/anisotropy.py
+        deactivate
+        ;;
+
+    help)
+        anisotropy-help
+        exit 1
+        ;;
+
+    *)
+        echo "Unknown command."
+        anisotropy-help
+        exit 1
+        ;;
+esac

conf/config.toml

@@ -0,0 +1,105 @@
+[logger]
+name = "anisotropy"
+format = "%(levelname)s: %(message)s"
+
+[base]
+simple = true
+bodyCentered = true
+faceCentered = true
+
+[simple]
+theta = [0.01, 0.28]
+
+[simple.geometry]
+directions = [
+    [1, 0, 0],
+    [0, 0, 1],
+    [1, 1, 1]
+]
+fillet = true
+
+[simple.mesh]
+fineness = 3
+minSize = 0.01
+maxSize = 0.1
+growthRate = 0.5
+nbSegPerEdge = 0.5
+nbSegPerRadius = 0.5
+chordalErrorEnabled = false
+chordalError = -1
+secondOrder = false
+optimize = true
+quadAllowed = false
+useSurfaceCurvature = true
+fuseEdges = true
+checkChartBoundary = false
+
+thickness = 0.005
+numberOfLayers = 2
+stretchFactor = 1.2
+isFacesToIgnore = true
+
+[bodyCentered]
+theta = [0.01, 0.18]
+
+[bodyCentered.geometry]
+directions = [
+    [1, 0, 0],
+    [0, 0, 1],
+    [1, 1, 1]
+]
+fillet = true
+
+[bodyCentered.mesh]
+fineness = 3
+minSize = 0.005
+maxSize = 0.05
+growthRate = 0.5
+nbSegPerEdge = 0.5
+nbSegPerRadius = 0.5
+chordalErrorEnabled = false
+chordalError = -1
+secondOrder = false
+optimize = true
+quadAllowed = false
+useSurfaceCurvature = true
+fuseEdges = true
+checkChartBoundary = false
+
+thickness = 0.005
+numberOfLayers = 2
+stretchFactor = 1.2
+isFacesToIgnore = true
+
+[faceCentered]
+theta = [0.01, 0.13]
+
+[faceCentered.geometry]
+directions = [
+    [1, 0, 0],
+    [0, 0, 1],
+    [1, 1, 1]
+]
+fillet = true
+
+[faceCentered.mesh]
+fineness = 3
+minSize = 0.005
+maxSize = 0.05
+growthRate = 0.5
+nbSegPerEdge = 0.5
+nbSegPerRadius = 0.5
+chordalErrorEnabled = false
+chordalError = -1
+secondOrder = false
+optimize = true
+quadAllowed = false
+useSurfaceCurvature = true
+fuseEdges = true
+checkChartBoundary = false
+
+thickness = 0.001
+numberOfLayers = 2
+stretchFactor = 1.2
+isFacesToIgnore = true
+

config.py

@@ -1,166 +0,0 @@
-import os, sys
-from src import applogger
-
-###
-#   Paths
-##
-ROOT = os.getcwd()
-sys.path.append(ROOT)
-
-LOG = os.path.join(ROOT, "logs")
-BUILD = os.path.join(ROOT, "build")
-
-###
-#   Logger
-##
-global logger
-logger = applogger.Logger()
-
-###
-#   Utilities
-##
-class Parameters:
-    """
-    [
-        "minSize",
-        "maxSize",
-        "growthRate",
-        "nbSegPerEdge",
-        "nbSegPerRadius",
-        "chordalErrorEnabled",
-        "chordalError",
-        "secondOrder",
-        "optimize",
-        "quadAllowed",
-        "useSurfaceCurvature",
-        "fuseEdges",
-        "checkChartBoundary"
-    ]
-    """
-    def __init__(self, **kwargs):
-        for (k, v) in kwargs.items():
-            setattr(self, k, v)
-
-class ViscousLayers(Parameters):
-    """
-    [
-        "thickness",
-        "numberOfLayers",
-        "stretchFactor",
-        "isFacesToIgnore",
-        "facesToIgnore",
-        "extrusionMethod"
-    ]
-    """
-    pass
-
-###
-#   Project variables
-##
-structures = [
-    #"simple",
-    "bodyCentered",
-    "faceCentered"
-]
-
-class simple:
-    theta = [c * 0.01 for c in range(1, 28 + 1)]
-    directions = [
-        [1, 0, 0],
-        [0, 0, 1],
-        [1, 1, 1]
-    ]
-    fillet = True
-    fineness = 3
-    parameters = Parameters(
-        minSize = 0.01,
-        maxSize = 0.1,
-        growthRate = 0.5,
-        nbSegPerEdge = 0.5,
-        nbSegPerRadius = 0.5,
-        chordalErrorEnabled = False,
-        chordalError = -1,
-        secondOrder = False,
-        optimize = True,
-        quadAllowed = False,
-        useSurfaceCurvature = True,
-        fuseEdges = True,
-        checkChartBoundary = False
-    )
-    viscousLayers = ViscousLayers(
-        thickness = 0.005, # 0.01, 0.005 for 0.28, 0.01 for prism
-        numberOfLayers = 2,
-        stretchFactor = 1.2,
-        isFacesToIgnore = True,
-        facesToIgnore = None,
-        extrusionMethod = None
-    )
-
-
-class bodyCentered:
-    theta = [c * 0.01 for c in range(1, 18 + 1)]
-    directions = [
-        [1, 0, 0],
-        [0, 0, 1],
-        [1, 1, 1]
-    ]
-    fillet = True 
-    fineness = 3
-    parameters = Parameters(
-        minSize = 0.005,
-        maxSize = 0.05,
-        growthRate = 0.5,
-        nbSegPerEdge = 0.5,
-        nbSegPerRadius = 0.5,
-        chordalErrorEnabled = False,
-        chordalError = -1,
-        secondOrder = False,
-        optimize = True,
-        quadAllowed = False,
-        useSurfaceCurvature = True,
-        fuseEdges = True,
-        checkChartBoundary = False
-    )
-    viscousLayers = ViscousLayers(
-        thickness = 0.005,
-        numberOfLayers = 2,
-        stretchFactor = 1.2,
-        isFacesToIgnore = True,
-        facesToIgnore = None,
-        extrusionMethod = None
-    )
-
-
-class faceCentered:
-    theta = [0.06, 0.13] #[c * 0.01 for c in range(1, 13 + 1)]
-    directions = [
-        #[1, 0, 0],
-        #[0, 0, 1],
-        [1, 1, 1]
-    ]
-    fillet = True 
-    fineness = 3
-    parameters = Parameters(
-        minSize = 0.005,
-        maxSize = 0.05,
-        growthRate = 0.5,
-        nbSegPerEdge = 0.5,
-        nbSegPerRadius = 0.5,
-        chordalErrorEnabled = False,
-        chordalError = -1,
-        secondOrder = False,
-        optimize = True,
-        quadAllowed = False,
-        useSurfaceCurvature = True,
-        fuseEdges = True,
-        checkChartBoundary = False
-    )
-    viscousLayers = ViscousLayers(
-        thickness = 0.001, # Failing on 0.13-111
-        numberOfLayers = 2,
-        stretchFactor = 1.2,
-        isFacesToIgnore = True,
-        facesToIgnore = None,
-        extrusionMethod = None
-    )
-

notes.md

@@ -1,30 +1,8 @@
-## relaxationFactors
 
-| p     | Iterations    | U     |
-| ---   | ---           | ---   |
-| 0.05  | 830           | 0.2   |
-| 0.1   | 678           | 0.2   |
-| 0.2   | 505           | 0.2   |
-| 0.3   | 305           | 0.3   |
-| 0.3   | 236           | 0.4   |
-| 0.3   | 181           | 0.5   |
+- createPatch
+- polyDualMesh
+- fvSolution: cellLimited
+- collapseDict: collapseEdges
+- renumberMesh
+- processorField
 
--->
-
-## SIMPLE.residualControl
-
-| p     | U     | Iterations    |
-| ---   | ---   | ---           |
-| 1e-4  | 1e-4  | 338           |
-| 1e-5  | 1e-5  | 499           |
-
-##
-
-```math
-U = \frac{\Delta p L}{mu} \frac{9}{256} (\sqrt 2 - \frac{1}{1 - \alpha})^2
-L = 2 R_0
-R_0 = 1
-scale = 1e-5
-mu = 1e-3
-\Delta p = 1
-```

openfoam/__init__.py

@@ -0,0 +1,32 @@
+
+from .meshConversion import ideasUnvToFoam
+from .meshManipulation import createPatch, transformPoints, checkMesh, renumberMesh
+from .miscellaneous import foamDictionary
+from .parallelProcessing import decomposePar
+from .solvers import potentialFoam, simpleFoam
+from .utils import foamVersion, foamClean
+
+__all__ = [
+    # meshConversion
+    "ideasUnvToFoam",
+
+    # meshManipulation
+    "createPatch",
+    "transformPoints",
+    "checkMesh",
+    "renumberMesh",
+
+    # miscellaneous
+    "foamDictionary",
+
+    # parallelProcessing
+    "decomposePar",
+
+    # solvers
+    "potentialFoam",
+    "simpleFoam",
+
+    # utils
+    "foamVersion",
+    "foamClean"
+]

openfoam/application.py

@@ -0,0 +1,47 @@
+import os, sys
+import subprocess
+
+import logging
+logger = logging.getLogger()
+
+def application(name: str, *args: str, case: str = None, stderr: bool = True, useMPI: bool = False) -> int:
+    
+    cmd = []
+
+    if useMPI:
+        nprocs = os.cpu_count()
+        cmd.extend(["mpirun", "-np", str(nprocs), "--oversubscribe"])
+    
+    cmd.append(name)
+
+    if case:
+        cmd.extend(["-case", case])
+
+    if args:
+        cmd.extend([*args])
+        
+    logger.info("{}: {}".format(name, [*args]))
+    logpath = os.path.join(case if case else "", "{}.log".format(name))
+   
+    with subprocess.Popen(cmd, 
+        stdout = subprocess.PIPE, 
+        stderr = subprocess.PIPE) as p, \
+        open(logpath, "wb") as logfile:
+        
+        for line in p.stdout:
+            #sys.stdout.buffer.write(line) 
+            logfile.write(line)
+
+        #for line in p.stderr:
+        #    logfile.write(line)
+
+        out, err = p.communicate()
+        logfile.write(err)
+
+        if err and stderr:
+            logger.error("""{}:
+            {}""".format(name, str(err, "utf-8")))
+
+    return out, p.returncode
+
+

openfoam/meshConversion.py

@@ -0,0 +1,5 @@
+from .application import application
+
+def ideasUnvToFoam(mesh: str, case: str = None) -> (str, int):
+    return application("ideasUnvToFoam", mesh, case = case, stderr = True)
+

openfoam/meshManipulation.py

@@ -0,0 +1,38 @@
+from .application import application
+
+import re
+
+def createPatch(dictfile: str = None, case: str = None):
+    args = ["-overwrite"]
+
+    if dictfile:
+        args.extend(["-dict", dictfile])
+
+    application("createPatch", *args, case = case, stderr = True)
+
+
+def transformPoints(scale: tuple, case: str = None):
+    scale_ = "{}".format(scale).replace(",", "")
+
+    application("transformPoints", "-scale", scale_, case = case, stderr = True)
+
+
+def checkMesh(case: str = None):
+    application("checkMesh", "-allGeometry", "-allTopology", case = case, stderr = True)
+    out = ""
+
+    with open("checkMesh.log", "r") as io:
+        warnings = []
+        for line in io:
+            if re.search("\*\*\*", line):
+                warnings.append(line.replace("***", "").strip())
+
+        if warnings:
+            out = "checkMesh:\n\t{}".format("\n\t".join(warnings))
+
+    return out
+
+
+def renumberMesh(case: str = None):
+    application("renumberMesh", "-parallel", "-overwrite", useMPI = True, case = case, stderr = True)
+

openfoam/miscellaneous.py

@@ -0,0 +1,10 @@
+from .application import application
+
+def foamDictionary(filepath: str, entry: str, value: str = None, case: str = None):
+    args = [filepath, "-entry", entry]
+
+    if value:
+        args.extend(["-set", value])
+
+    application("foamDictionary", *args, case = case, stderr = False)
+

openfoam/parallelProcessing.py

@@ -0,0 +1,5 @@
+from .application import application
+
+def decomposePar(case: str = None):
+    application("decomposePar", case = case, stderr = True)
+

openfoam/solvers.py

@@ -0,0 +1,19 @@
+from .application import application
+
+import re 
+
+def potentialFoam(case: str = None):
+    application("potentialFoam", "-parallel", useMPI = True, case = case, stderr = True)
+
+
+def simpleFoam(case: str = None):
+    _, returncode = application("simpleFoam", "-parallel", useMPI = True, case = case, stderr = True)
+    out = ""
+
+    with open("simpleFoam.log", "r") as io:
+        for line in io:
+            if re.search("solution converged", line):
+                out = "simpleFoam:\n\t{}".format(line.strip())
+
+    return returncode, out
+

openfoam/utils.py

@@ -0,0 +1,16 @@
+import os
+import shutil
+
+def foamVersion() -> str:
+    return "OpenFOAM-{}".format(os.environ["WM_PROJECT_VERSION"])
+
+
+def foamClean(case: str = None):
+    rmDirs = ["0", "constant", "system", "postProcessing", "logs"]
+    rmDirs.extend([ "processor{}".format(n) for n in range(os.cpu_count()) ])
+    path = case if case else ""
+
+    for d in rmDirs:
+        if os.path.exists(os.path.join(path, d)):
+            shutil.rmtree(os.path.join(path, d))
+

requirements.txt

@@ -0,0 +1,3 @@
+numpy
+pyquaternion
+toml

salomepl/README.md

@@ -0,0 +1,24 @@
+## netgen parameters
+
+ minSize  
+ maxSize  
+ growthRate  
+ nbSegPerEdge  
+ nbSegPerRadius  
+ chordalErrorEnabled  
+ chordalError  
+ secondOrder  
+ optimize  
+ quadAllowed  
+ useSurfaceCurvature  
+ fuseEdges  
+ checkChartBoundary 
+
+## viscous layers parameters
+
+ thickness  
+ numberOfLayers  
+ stretchFactor  
+ isFacesToIgnore  
+ facesToIgnore  
+ extrusionMethod 

salomepl/bodyCentered.py

@@ -1,5 +1,5 @@
-import salome
-salome.salome_init()
+#import salome
+#salome.salome_init()
 
 import GEOM
 from salome.geom import geomBuilder
@@ -284,4 +284,3 @@ def bodyCenteredHexagonalPrism(theta = 0.01, fillet = False, direction = [1, 1,
     groups.append(wall)
 
     return shape, groups
-

salomepl/faceCentered.py

@@ -1,5 +1,5 @@
-import salome
-salome.salome_init()
+#import salome
+#salome.salome_init()
 
 import GEOM
 from salome.geom import geomBuilder
@@ -281,4 +281,3 @@ def faceCenteredHexagonalPrism(theta = 0.01, fillet = False, direction = [1, 1,
     groups.append(wall)
 
     return shape, groups
-

salomepl/genmesh.py

@@ -0,0 +1,142 @@
+###
+#   This file executes inside salome environment
+#
+#   salome starts at user home directory
+##
+import os, sys
+import math
+
+import salome
+
+# get project path from args
+ROOT = sys.argv[6]
+sys.path.append(ROOT)
+# site-packages from virtual env
+sys.path.append(os.path.join(ROOT, "env/lib/python3.9/site-packages"))
+
+import toml
+import logging
+from anisotropy.utils import struct
+
+CONFIG = os.path.join(ROOT, "conf/config.toml")
+config = struct(toml.load(CONFIG))
+
+LOG = os.path.join(ROOT, "logs")
+
+logging.basicConfig(
+    level = logging.INFO,
+    format = config.logger.format,
+    handlers = [
+        logging.StreamHandler(),
+        logging.FileHandler(f"{ LOG }/{ config.logger.name }.log")
+    ]
+)
+logger = logging.getLogger(config.logger.name)
+
+from salomepl.simple import simpleCubic, simpleHexagonalPrism
+from salomepl.faceCentered import faceCenteredCubic, faceCenteredHexagonalPrism
+from salomepl.bodyCentered import bodyCenteredCubic, bodyCenteredHexagonalPrism
+
+from salomepl.geometry import getGeom 
+from salomepl.mesh import smeshBuilder, meshCreate, meshCompute, meshStats, meshExport
+
+
+def main():
+
+    stype = str(sys.argv[1])
+    theta = float(sys.argv[2])
+    fillet = int(sys.argv[3])
+    flowdirection = [int(coord) for coord in sys.argv[4]]
+    export = str(sys.argv[5])
+
+    genmesh(stype, theta, fillet, flowdirection, export)
+
+
+def genmesh(stype, theta, fillet, direction, export):
+
+    logger.info("""genMesh: 
+    structure type:\t{}
+    coefficient:\t{}
+    fillet:\t{}
+    flow direction:\t{}
+    export path:\t{}""".format(stype, theta, fillet, direction, export))
+
+    params = (theta, fillet, direction)
+
+    salome.salome_init()
+    
+    ###
+    #   Structure and mesh configurations
+    ##
+    if stype == "simple":
+        if direction in [[1, 0, 0], [0, 0, 1]]:
+            structure = simpleCubic
+
+        elif direction == [1, 1, 1]:
+            structure = simpleHexagonalPrism
+
+        #fineness = config.simple.fineness
+        #parameters = config.simple.parameters
+        #viscousLayers = config.simple.viscousLayers
+        meshParameters = config.simple.mesh
+
+    elif stype == "faceCentered":
+        if direction in [[1, 0, 0], [0, 0, 1]]:
+            structure = faceCenteredCubic
+
+        elif direction == [1, 1, 1]:
+            structure = faceCenteredHexagonalPrism
+
+        #fineness = config.faceCentered.fineness
+        #parameters = config.faceCentered.parameters
+        #viscousLayers = config.faceCentered.viscousLayers
+        meshParameters = config.faceCentered.mesh
+
+    elif stype == "bodyCentered":
+        if direction in [[1, 0, 0], [0, 0, 1]]:
+            structure = bodyCenteredCubic
+
+        elif direction == [1, 1, 1]:
+            structure = bodyCenteredHexagonalPrism
+    
+        #fineness = config.bodyCentered.fineness
+        #parameters = config.bodyCentered.parameters
+        #viscousLayers = config.bodyCentered.viscousLayers
+        meshParameters = config.bodyCentered.mesh
+
+    ###
+    #   Shape
+    ##
+    geompy = getGeom()
+    shape, groups = structure(*params)
+    [length, surfaceArea, volume] = geompy.BasicProperties(shape, theTolerance = 1e-06)
+
+    logger.info("""shape:
+    edges length:\t{}
+    surface area:\t{}
+    volume:\t{}""".format(length, surfaceArea, volume))
+    
+    ###
+    #   Mesh
+    ##
+    facesToIgnore = []
+    for group in groups:
+        if group.GetName() in ["inlet", "outlet"]:
+            facesToIgnore.append(group)
+
+    meshParameters.facesToIgnore = facesToIgnore
+    meshParameters.extrusionMethod = smeshBuilder.SURF_OFFSET_SMOOTH
+    
+    mesh = meshCreate(shape, groups, meshParameters) #fineness, parameters, viscousLayers)
+    meshCompute(mesh)
+
+    meshStats(mesh)
+    meshExport(mesh, export)
+    
+    salome.salome_close()
+
+
+if __name__ == "__main__":
+    main()
+
+    

salomepl/geometry.py

@@ -1,9 +1,9 @@
 import GEOM
 from salome.geom import geomBuilder
+
 geompy = geomBuilder.New()
 
 import math
-import logging
 from pyquaternion import Quaternion
 import numpy as np
 
@@ -236,4 +236,3 @@ def boundaryCreate(gobj, dvec, grains):
 
     return boundary
 
-

salomepl/mesh.py

@@ -2,13 +2,14 @@ import SMESH
 from salome.smesh import smeshBuilder
 smesh = smeshBuilder.New()
 
-from config import logger
+import logging
+logger = logging.getLogger("anisotropy")
 
 def getSmesh():
     return smesh
 
 
-def meshCreate(shape, groups, fineness, parameters, viscousLayers = None):
+def meshCreate(shape, groups, parameters): #fineness, parameters, viscousLayers = None):
     """
     Creates a mesh from a geometry.
 
@@ -35,7 +36,7 @@ def meshCreate(shape, groups, fineness, parameters, viscousLayers = None):
         3: "Fine",
         4: "Very fine",
         5: "Custom"
-    }[fineness]
+    }[parameters.fineness]
 
     # Mesh
     mesh = smesh.Mesh(shape)
@@ -45,9 +46,9 @@ def meshCreate(shape, groups, fineness, parameters, viscousLayers = None):
     param = netgen.Parameters()
     param.SetMinSize(parameters.minSize)
     param.SetMaxSize(parameters.maxSize)
-    param.SetFineness(fineness)
+    param.SetFineness(parameters.fineness)
     
-    if fineness == 5:
+    if parameters.fineness == 5:
         param.SetGrowthRate(parameters.growthRate)
         param.SetNbSegPerEdge(parameters.nbSegPerEdge)
         param.SetNbSegPerRadius(parameters.nbSegPerRadius)
@@ -93,30 +94,30 @@ def meshCreate(shape, groups, fineness, parameters, viscousLayers = None):
     ###
     #   Viscous layers
     ##
-    if not viscousLayers is None:
-        vlayer = netgen.ViscousLayers(
-            viscousLayers.thickness,
-            viscousLayers.numberOfLayers,
-            viscousLayers.stretchFactor,
-            viscousLayers.facesToIgnore,
-            viscousLayers.isFacesToIgnore, 
-            viscousLayers.extrusionMethod
-        )
+    #if not viscousLayers is None:
+    vlayer = netgen.ViscousLayers(
+        parameters.thickness,
+        parameters.numberOfLayers,
+        parameters.stretchFactor,
+        parameters.facesToIgnore,
+        parameters.isFacesToIgnore, 
+        parameters.extrusionMethod
+    )
 
-        logger.info("""meshCreate:
-    viscous layers: 
-        thickness:\t{}
-        number:\t{}
-        stretch factor:\t{}""".format(
-            viscousLayers.thickness, 
-            viscousLayers.numberOfLayers, 
-            viscousLayers.stretchFactor))
+    logger.info("""meshCreate:
+viscous layers: 
+    thickness:\t{}
+    number:\t{}
+    stretch factor:\t{}""".format(
+        parameters.thickness, 
+        parameters.numberOfLayers, 
+        parameters.stretchFactor))
 
         
 
-    else:
-        logger.info("""meshCreate: 
-    viscous layers: disabled""")
+    #else:
+    #    logger.info("""meshCreate: 
+    #viscous layers: disabled""")
 
 
     return mesh
@@ -191,4 +192,3 @@ def meshExport(mobj, path):
     except:
         logger.error("""meshExport: Cannot export.""")
 
-

salomepl/simple.py

@@ -1,5 +1,5 @@
-import salome
-salome.salome_init()
+#import salome
+#salome.salome_init()
 
 import GEOM
 from salome.geom import geomBuilder
@@ -261,4 +261,3 @@ def simpleHexagonalPrism(theta = 0.01, fillet = False, direction = [1, 1, 1]):
     groups.append(wall)
 
     return shape, groups
-

salomepl/utils.py

@@ -2,8 +2,8 @@
 import subprocess
 import logging
 import sys, os
-import config
-from config import logger
+
+logger = logging.getLogger()
 
 def hasDesktop() -> bool:
     return salome.sg.hasDesktop()
@@ -80,4 +80,3 @@ def remote(port, cmd):
         stderr = subprocess.PIPE)
 
     return p
-

samples/__init__.py

@@ -1,117 +0,0 @@
-from collections import namedtuple
-import os, sys
-import logging
-from pyquaternion import Quaternion
-import math
-
-import salome
-
-sys.path.append(sys.argv[6])
-
-import config
-from config import logger
-#from src import applogger
-from simple import simpleCubic, simpleHexagonalPrism
-from faceCentered import faceCenteredCubic, faceCenteredHexagonalPrism
-from bodyCentered import bodyCenteredCubic, bodyCenteredHexagonalPrism
-
-from src import geometry_utils
-from src import mesh_utils
-
-
-def main():
-
-    stype = str(sys.argv[1])
-    theta = float(sys.argv[2])
-    fillet = int(sys.argv[3])
-    flowdirection = [int(coord) for coord in sys.argv[4]]
-    export = str(sys.argv[5])
-
-    genMesh(stype, theta, fillet, flowdirection, export)
-
-
-def genMesh(stype, theta, fillet, direction, export):
-
-    logger.info("""genMesh: 
-    structure type:\t{}
-    coefficient:\t{}
-    fillet:\t{}
-    flow direction:\t{}
-    export path:\t{}""".format(stype, theta, fillet, direction, export))
-
-    params = (theta, fillet, direction)
-
-    salome.salome_init()
-    
-    ###
-    #   Structure and mesh configurations
-    ##
-    if stype == "simple":
-        if direction in [[1, 0, 0], [0, 0, 1]]:
-            structure = simpleCubic
-
-        elif direction == [1, 1, 1]:
-            structure = simpleHexagonalPrism
-
-        fineness = config.simple.fineness
-        parameters = config.simple.parameters
-        viscousLayers = config.simple.viscousLayers
-
-    elif stype == "faceCentered":
-        if direction in [[1, 0, 0], [0, 0, 1]]:
-            structure = faceCenteredCubic
-
-        elif direction == [1, 1, 1]:
-            structure = faceCenteredHexagonalPrism
-
-        fineness = config.faceCentered.fineness
-        parameters = config.faceCentered.parameters
-        viscousLayers = config.faceCentered.viscousLayers
-
-    elif stype == "bodyCentered":
-        if direction in [[1, 0, 0], [0, 0, 1]]:
-            structure = bodyCenteredCubic
-
-        elif direction == [1, 1, 1]:
-            structure = bodyCenteredHexagonalPrism
-    
-        fineness = config.bodyCentered.fineness
-        parameters = config.bodyCentered.parameters
-        viscousLayers = config.bodyCentered.viscousLayers
-
-    ###
-    #   Shape
-    ##
-    geompy = geometry_utils.getGeom()
-    shape, groups = structure(*params)
-    [length, surfaceArea, volume] = geompy.BasicProperties(shape, theTolerance = 1e-06)
-
-    logger.info("""shape:
-    edges length:\t{}
-    surface area:\t{}
-    volume:\t{}""".format(length, surfaceArea, volume))
-    
-    ###
-    #   Mesh
-    ##
-    facesToIgnore = []
-    for group in groups:
-        if group.GetName() in ["inlet", "outlet"]:
-            facesToIgnore.append(group)
-
-    viscousLayers.facesToIgnore = facesToIgnore
-    viscousLayers.extrusionMethod = mesh_utils.smeshBuilder.SURF_OFFSET_SMOOTH
-    
-    mesh = mesh_utils.meshCreate(shape, groups, fineness, parameters, viscousLayers)
-    mesh_utils.meshCompute(mesh)
-
-    mesh_utils.meshStats(mesh)
-    mesh_utils.meshExport(mesh, export)
-    
-    salome.salome_close()
-
-
-if __name__ == "__main__":
-    main()
-
-    

src/anisotropeCubic.py

@@ -1,103 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-
-import math
-from . import geometry_utils
-
-import GEOM
-geompy = geometry_utils.getGeom()
-
-class StructuredGrains:
-    def __init__(self, radius, stackAngle, theta, layers):
-        self.pos = [0, 0, 0]
-        self.angle = [0, 0, 0]
-        self.radius = radius
-        self.theta = theta
-        self.layers = layers
-        
-        # Parameters and dependencies
-        R = self.radius / (1 - self.theta)
-        
-        C1 = 0.8 #fillet[0]
-        C2 = 0.4 #fillet[1]
-        self.theta1 = 0.01
-        self.theta2 = 0.28
-        
-        Cf = C1 + (C2 - C1) / (self.theta2 - self.theta1) * (self.theta - self.theta1)
-        R_fillet = Cf * (self.radius * math.sqrt(2) - R)
-        
-        ###
-        stackang = [
-            0.5 * math.pi - stackAngle[0], 
-            0.5 * math.pi - stackAngle[1], 
-            0.5 * math.pi - stackAngle[2]
-        ]
-        
-        xvec = geompy.MakeVector(
-            geompy.MakeVertex(0, 0, 0),
-            geompy.MakeVertex(1, 0, 0))
-        yvec = geometry_utils.rotate(xvec, [0.5 * math.pi, 0, 0])
-        zvec = geometry_utils.rotate(xvec, [0, 0.5 * math.pi, 0])
-        
-        grain = geompy.MakeSpherePntR(geompy.MakeVertex(pos[0], pos[1], pos[2]), R)
-        
-        xstack = geompy.MakeMultiTranslation1D(grain, xvec, 2 * self.radius, self.layers[0])
-        ystack = geompy.MakeMultiTranslation1D(xgrain, yvec, 2 * self.radius, self.layers[1])
-        zstack = geompy.MakeMultiTranslation1D(ygrain, zvec, 2 * self.radius, self.layers[2])
-        
-        # Correct position to zero
-        stack = geompy.MakeTranslation(zstack, -2 * self.radius, 0, 0)
-        
-        self.geometry = geompy.ExtractShapes(stack, geompy.ShapeType["SOLID"], True)
-        self.geometry = geompy.MakeFuseList(self.geometry, False, False)
-                
-        if not R_fillet == 0:
-            self.geometry = geompy.MakeFilletAll(self.geometry, R_fillet)
-
-
-class AnisotropeCubic:
-    def __init__(self, scale, grains, style):
-        self.pos = [0, 0, 0]
-        self.angle = [0, 0, 0]
-        self.scale = scale
-        self.grains = grains
-
-        # Bounding box
-        if style == 0:
-            # Square
-            profile = (
-                geompy.Sketcher3D()
-                .addPointAbsolute(0, 0, 0)
-                .addPointAbsolute(0, 0, self.scale[2])
-                .addPointAbsolute(0, self.scale[1], self.scale[2])
-                .addPointAbsolute(0, self.scale[1], 0)
-                .addPointAbsolute(0, 0, 0)
-            )
-            
-            face = geompy.MakeFaceWires([profile.wire()], 1)
-
-        elif style == 1:
-            # Rombus
-            profile = (
-                geompy.Sketcher3D()
-                .addPointAbsolute(self.scale[0], 0.5 * self.scale[1], 0)
-                .addPointAbsolute(0.5 * self.scale[0], 0, 0.5 * self.scale[2])
-                .addPointAbsolute(0, 0.5 * self.scale[1], self.scale[2])
-                .addPointAbsolute(0.5 * self.scale[0], self.scale[1], 0.5 * self.scale[2])
-                .addPointAbsolute(self.scale[0], 0.5 * self.scale[1], 0)
-            )
-
-            face = geompy.MakeFaceWires([profile.wire()], 1)
-            face = geompy.MakeTranslation(face, 
-                0.5 * self.scale[1], 0, 0)
-
-        self.boundingbox = geompy.MakePrismVecH(face,
-            geompy.MakeVectorDXDYDZ(1, 0, 0), 
-            self.scale[0])
-        
-        # Geometry
-        self.geometry = geompy.MakeCutList(box, [self.grains], True)
-
-
-
-

src/applogger.py

@@ -1,41 +0,0 @@
-import logging
-import config
-
-class Logger():
-    def __init__(self):
-        logging.basicConfig(
-            level = logging.INFO, 
-            format = "%(levelname)s: %(message)s",
-            handlers = [
-                logging.StreamHandler(),
-                logging.FileHandler(f"{config.LOG}/anisotrope.log")
-            ]
-        )
-
-        self.logger = logging.getLogger("anisotrope")
-        self.warnings = 0
-        self.errors = 0
-        self.criticals = 0
-        self.exceptions = 0
-        
-    def info(self, *args):
-        self.logger.info(*args)
-
-    def warning(self, *args):
-        self.warnings += 1
-        self.logger.warning(*args)
-
-    def error(self, *args):
-        self.errors += 1
-        self.logger.error(*args)
-
-    def critical(self, *args):
-        self.criticals += 1
-        self.logger.critical(*args)
-
-    def exception(self, *args):
-        self.exceptions += 1
-        self.logger.exception(*args)
-
-    def fancyline(self):
-        self.logger.info("-" * 80)

src/foam_utils.py

@@ -1,126 +0,0 @@
-import os, sys, shutil
-import subprocess
-import logging
-import time
-import re
-from datetime import timedelta
-from config import logger
-
-def application(name: str, *args: str, case: str = None, stderr: bool = True, useMPI: bool = False) -> int:
-    
-    cmd = []
-
-    if useMPI:
-        nprocs = os.cpu_count()
-        cmd.extend(["mpirun", "-np", str(nprocs), "--oversubscribe"])
-    
-    cmd.append(name)
-
-    if case:
-        cmd.extend(["-case", case])
-
-    if args:
-        cmd.extend([*args])
-        
-    logger.info("{}: {}".format(name, [*args]))
-    logpath = os.path.join(case if case else "", "{}.log".format(name))
-   
-    with subprocess.Popen(cmd, 
-        stdout = subprocess.PIPE, 
-        stderr = subprocess.PIPE) as p, \
-        open(logpath, "wb") as logfile:
-        
-        for line in p.stdout:
-            #sys.stdout.buffer.write(line) 
-            logfile.write(line)
-
-        #for line in p.stderr:
-        #    logfile.write(line)
-
-        out, err = p.communicate()
-        logfile.write(err)
-
-        if err and stderr:
-            logger.error("""{}:
-            {}""".format(name, str(err, "utf-8")))
-
-    return out, p.returncode
-
-
-def foamVersion() -> str:
-    return "OpenFOAM-{}".format(os.environ["WM_PROJECT_VERSION"])
-
-
-def foamClean(case: str = None):
-    rmDirs = ["0", "constant", "system", "postProcessing", "logs"]
-    rmDirs.extend([ "processor{}".format(n) for n in range(os.cpu_count()) ])
-    path = case if case else ""
-
-    for d in rmDirs:
-        if os.path.exists(os.path.join(path, d)):
-            shutil.rmtree(os.path.join(path, d))
-
-
-def ideasUnvToFoam(mesh: str, case: str = None) -> (str, int):
-    return application("ideasUnvToFoam", mesh, case = case, stderr = True)
-
-
-def createPatch(dictfile: str = None, case: str = None):
-    args = ["-overwrite"]
-
-    if dictfile:
-        args.extend(["-dict", dictfile])
-
-    application("createPatch", *args, case = case, stderr = True)
-
-
-def transformPoints(scale: tuple, case: str = None):
-    scale_ = "{}".format(scale).replace(",", "")
-
-    application("transformPoints", "-scale", scale_, case = case, stderr = True)
-
-
-def checkMesh(case: str = None):
-    application("checkMesh", "-allGeometry", "-allTopology", case = case, stderr = True)
-
-    with open("checkMesh.log", "r") as io:
-        warnings = []
-        for line in io:
-            if re.search("\*\*\*", line):
-                warnings.append(line.replace("***", "").strip())
-
-        if warnings:
-            logger.warning("checkMesh:\n\t{}".format("\n\t".join(warnings)))
-
-def foamDictionary(filepath: str, entry: str, value: str = None, case: str = None):
-    args = [filepath, "-entry", entry]
-
-    if value:
-        args.extend(["-set", value])
-
-    application("foamDictionary", *args, case = case, stderr = False)
-
-
-def decomposePar(case: str = None):
-    application("decomposePar", case = case, stderr = True)
-
-
-def renumberMesh(case: str = None):
-    application("renumberMesh", "-parallel", "-overwrite", useMPI = True, case = case, stderr = True)
-
-
-def potentialFoam(case: str = None):
-    application("potentialFoam", "-parallel", useMPI = True, case = case, stderr = True)
-
-
-def simpleFoam(case: str = None):
-    _, returncode = application("simpleFoam", "-parallel", useMPI = True, case = case, stderr = True)
-
-    with open("simpleFoam.log", "r") as io:
-        for line in io:
-            if re.search("solution converged", line):
-                logger.info("simpleFoam:\n\t{}".format(line.strip()))
-
-    return returncode
-
-

src/utils.py

@@ -1,77 +0,0 @@
-from multiprocessing import Queue, Process, cpu_count
-import socket
-import logging
-
-def queue(cmd, qin, qout, *args):
-    
-    while True:
-        # Get item from the queue
-        pos, var = qin.get()
-        
-        # Exit point 
-        if pos is None:
-            break
-
-        # Execute command
-        res = cmd(*var, *args)
-
-        # Put results to the queue
-        qout.put((pos, res))
-
-    return
-
-
-def parallel(np, var, cmd):
-
-    varcount = len(var)
-
-    processes = []
-    nprocs = np if np <= cpu_count() else cpu_count()
-    
-    qin = Queue(1)
-    qout = Queue()
-    
-    logging.info("cpu count: {}".format(np))
-    logging.info("var: {}".format(var))
-    logging.info("cmd: {}".format(cmd))
-
-    # Create processes
-    for n in range(nprocs):
-        pargs = [cmd, qin, qout]
-
-        p = Process(target = queue, args = tuple(pargs))
-
-        processes.append(p)
-    
-    # Start processes
-    for p in processes:
-        p.daemon = True
-        p.start()
-
-    # Fill queue
-    for n in range(varcount):
-        qin.put((n, var[n]))
-
-    for _ in range(nprocs):
-        qin.put((None, None))
-    
-    # Get results
-    results = [[] for n in range(varcount)]
-
-    for n in range(varcount):
-        index, res = qout.get()
-        
-        results[index] = res
-    
-    # Wait until each processor has finished
-    for p in processes:
-        p.join()
-
-    return results
-
-    
-def portIsFree(address, port):
-
-    with socket.socket(socket.AF_INET, socket.SOCK_STREAM) as s:
-        return s.connect_ex((address, port)) == 0
-

temp/anisotrope_cube_bc.py

@@ -1,80 +0,0 @@
-import salome
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-import math
-
-axes = [
-    geompy.MakeVectorDXDYDZ(1, 0, 0),
-    geompy.MakeVectorDXDYDZ(0, 1, 0),
-    geompy.MakeVectorDXDYDZ(0, 0, 1)
-]
-
-vtx = [
-    geompy.MakeVertex(1 / math.sqrt(2), -1 / math.sqrt(2), 0.5),
-    geompy.MakeVertex(-1 / math.sqrt(2), 1 / math.sqrt(2), -0.5),
-    geompy.MakeVertex(-1, -1, -0.5),
-    geompy.MakeVertex(-0.5, -0.5, 0)
-]
-
-box = geompy.MakeBoxTwoPnt(vtx[0], vtx[1])
-box = geompy.MakeRotation(box, axes[2], 45 * math.pi / 180.0)
-
-#alpha = [ x * 0.01 for x in range(1, 28 + 1) ]
-alpha=[0.15]
-
-#for coef in alpha:
-spheres = geompy.MakeSpherePntR(vtx[2], math.sqrt(3) / 4 / (1 - alpha[0]))
-spheres = geompy.MakeMultiTranslation2D(spheres, axes[0], 1, 3, axes[1], 1, 3)
-spheres = geompy.MakeMultiTranslation1D(spheres, axes[2], 1, 2)
-
-spheres2 = geompy.MakeSpherePntR(vtx[3], math.sqrt(3) / 4 / (1 - alpha[0]))
-spheres2 = geompy.MakeMultiTranslation2D(spheres2, axes[0], 1, 3, axes[1], 1, 3)
-
-PoreBC = geompy.MakeCutList(box, [spheres, spheres2], False)
-
-geompy.addToStudy(PoreBC, 'PoreBC')
-
-box2 = geompy.MakeBoxTwoPnt(vtx[0], geompy.MakeVertex(0, 0, 0))
-box2 = geompy.MakeRotation(box2, axes[2], 45 * math.pi / 180.0)
-Segment1_8 = geompy.MakeCommonList([PoreBC, box2], True)
-
-geompy.addToStudy(Segment1_8, 'Segment1_8')
-
-mesh = smesh.Mesh(PoreBC)
-netgen = mesh.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-
-param = netgen.Parameters()
-param.SetSecondOrder( 0 )
-param.SetOptimize( 1 )
-param.SetChordalError( -1 )
-param.SetChordalErrorEnabled( 0 )
-param.SetUseSurfaceCurvature( 1 )
-param.SetFuseEdges( 1 )
-param.SetCheckChartBoundary( 0 )
-param.SetMinSize( 0.01 )
-param.SetMaxSize( 0.02 )
-param.SetFineness( 5 )
-param.SetGrowthRate( 0.1 )
-param.SetNbSegPerEdge( 5 )
-param.SetNbSegPerRadius( 10 )
-param.SetQuadAllowed( 1 )
-
-#vlayer = netgen.ViscousLayers(0.05, 3, 1.5, [15, 29, 54], 1, smeshBuilder.SURF_OFFSET_SMOOTH)
-
-isDone = mesh.Compute()
-
-if not isDone:
-    print("Mesh is not computed")
-
-
-if salome.sg.hasDesktop():
-    salome.sg.updateObjBrowser()
-

temp/anisotrope_cube_fc.py

@@ -1,80 +0,0 @@
-import salome
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-import SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-smesh = smeshBuilder.New()
-
-import math
-
-axes = [
-    geompy.MakeVectorDXDYDZ(1, 0, 0),
-    geompy.MakeVectorDXDYDZ(0, 1, 0),
-    geompy.MakeVectorDXDYDZ(0, 0, 1),
-    geompy.MakeVectorDXDYDZ(1, 1, 0),
-    geompy.MakeVectorDXDYDZ(1, -1, 0)
-]
-
-vtx = [
-    geompy.MakeVertex(0, 0, -0.5),
-    geompy.MakeVertex(1 / math.sqrt(2), 1 / math.sqrt(2), 0.5),
-    geompy.MakeVertex(0.5, 0, 0),
-    geompy.MakeVertex(0.5 / math.sqrt(2), 0.5 / math.sqrt(2), 0.5)
-]
-
-box = geompy.MakeBoxTwoPnt(vtx[0], vtx[1])
-box = geompy.MakeRotation(box, axes[2], -45 * math.pi / 180.0)
-
-#alpha = [ x * 0.01 for x in range(1, 28 + 1) ]
-alpha=[0.08]
-
-#for coef in alpha:
-spheres = geompy.MakeSpherePntR(vtx[0], math.sqrt(2) / 4 / (1 - alpha[0]))
-spheres = geompy.MakeMultiTranslation2D(spheres, axes[3], 1 / math.sqrt(2), 2, axes[4], 1 / math.sqrt(2), 2)
-spheres = geompy.MakeMultiTranslation1D(spheres, axes[2], 1, 2)
-
-sphere2 = geompy.MakeSpherePntR(vtx[2], math.sqrt(2) / 4 / (1 - alpha[0]))
-
-PoreFC = geompy.MakeCutList(box, [spheres, sphere2], True)
-
-geompy.addToStudy(PoreFC, 'PoreFC')
-
-box2 = geompy.MakeBoxTwoPnt(geompy.MakeVertex(0, 0, 0), vtx[3])
-box2 = geompy.MakeRotation(box2, axes[2], -45 * math.pi / 180.0)
-Segment1_8 = geompy.MakeCommonList([PoreFC, box2], True)
-
-geompy.addToStudy(Segment1_8, 'Segment1_8')
-
-mesh = smesh.Mesh(PoreFC)
-netgen = mesh.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-
-param = netgen.Parameters()
-param.SetSecondOrder( 0 )
-param.SetOptimize( 1 )
-param.SetChordalError( -1 )
-param.SetChordalErrorEnabled( 0 )
-param.SetUseSurfaceCurvature( 1 )
-param.SetFuseEdges( 1 )
-param.SetCheckChartBoundary( 0 )
-param.SetMinSize( 0.01 )
-param.SetMaxSize( 0.02 )
-param.SetFineness( 5 )
-param.SetGrowthRate( 0.1 )
-param.SetNbSegPerEdge( 5 )
-param.SetNbSegPerRadius( 10 )
-param.SetQuadAllowed( 1 )
-
-#vlayer = netgen.ViscousLayers(0.05, 3, 1.5, [15, 29, 54], 1, smeshBuilder.SURF_OFFSET_SMOOTH)
-
-isDone = mesh.Compute()
-
-if not isDone:
-    print("Mesh is not computed")
-
-
-if salome.sg.hasDesktop():
-    salome.sg.updateObjBrowser()

temp/faceCenteredCubic.old.py

@@ -1,502 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-import salome, GEOM, SMESH, SALOMEDS
-from salome.geom import geomBuilder
-from salome.smesh import smeshBuilder
-import math
-import os, sys
-import logging
-import time
-from datetime import timedelta
-
-class faceCenteredCubic:
-    def __init__(self, name = None):
-        self.name = name if type(name) != None else "faceCenteredCubic"
-        self.geometry = None
-        self.geometrybbox = None
-        self.mesh = None
-        self.boundary = None
-        
-        self.rombus = None
-        self.rombusbbox = None
-
-        self.spheres = None
-
-        salome.salome_init()
-
-    def geometryCreate(self, alpha, fillet):
-        """
-        Create the simple cubic geometry.
-
-        Parameters:
-            alpha (float): Sphere intersection parameter which used for cutting spheres from box.
-                
-                Radius = R0 / (1 - alpha)
-                Should be from 0.01 to 0.28
-
-            fillet (list): Fillet coefficient.
-                
-                [fillet1, fillet2]
-                0 <= fillet <= 1
-                if fillet = [0, 0] then R_fillet = 0
-
-        Returns:
-            Configured geometry.
-        """
-
-        geompy = geomBuilder.New()
-        
-        # Parameters
-        R0 = math.sqrt(2) / 4
-        R = R0 / (1 - alpha)
-        
-        C1 = fillet[0]
-        C2 = fillet[1]
-        alpha1 = 0.01
-        alpha2 = 0.28
-        
-        Cf = C1 + (C2 - C1) / (alpha2 - alpha1) * (alpha - alpha1)
-        R_fillet = Cf * (R0 * math.sqrt(2) - R)
-        
-        logging.info("geometryCreate: alpha = {}".format(alpha))
-        logging.info("geometryCreate: R = {}".format(R))
-        logging.info("geometryCreate: R_fillet = {}".format(R_fillet))
-
-        # xyz axes
-        axes = [
-            geompy.MakeVectorDXDYDZ(1, 0, 0),
-            geompy.MakeVectorDXDYDZ(0, 1, 0),
-            geompy.MakeVectorDXDYDZ(0, 0, 1)
-        ]
-        
-        # Main box
-        size = [1 / math.sqrt(2), 1 / math.sqrt(2), 1]
-        angle = [0, 0, 0]
-        pos = [0, 0, 0]
-
-        box = geompy.MakeBoxDXDYDZ(size[0], size[1], size[2])
-
-        for n in range(3):
-            box = geompy.MakeRotation(box, axes[n], angle[n] * math.pi / 180.0)
-
-        box = geompy.MakeTranslation(box, pos[0], pos[1], pos[2])
-        
-        #[x, y, z, _, _, _, _, _, _] = geompy.GetPosition(box)
-        #pos = [x, y, z]
-        
-        # Spheres for cutting
-        sphere = geompy.MakeSpherePntR(geompy.MakeVertex(pos[0], pos[1], pos[2]), R)
-        sphere = geompy.MakeMultiTranslation2D(sphere, None, 2 * R0, 3, None, 2 * R0, 3)
-        sphere2 = geompy.MakeTranslation(sphere, 0, 0, 2 * math.sqrt(2) * R0)
-        sphere3 = geompy.MakeTranslation(sphere, R0, R0, 0.5)
-        
-        sphere = geompy.ExtractShapes(sphere, geompy.ShapeType["SOLID"], True)
-        sphere2 = geompy.ExtractShapes(sphere2, geompy.ShapeType["SOLID"], True)
-        sphere3 = geompy.ExtractShapes(sphere3, geompy.ShapeType["SOLID"], True)
-
-        sphere = geompy.MakeFuseList(sphere + sphere2 + sphere3, False, False)
-
-                
-        if not R_fillet == 0:
-            sphere = geompy.MakeFilletAll(sphere, R_fillet)
-        
-        self.spheres = sphere
-        
-        # Main geometry and bounding box
-        # geompy.RemoveExtraEdges(obj, True)
-        self.geometry = geompy.MakeCutList(box, [sphere], True)
-        self.geometrybbox = box
-
-        # Rombus and bounding box
-        sk = geompy.Sketcher3D()
-        sk.addPointsAbsolute(0, 0, size[2])
-        sk.addPointsAbsolute(size[2] / 2, 0, size[2] / 2)
-        sk.addPointsAbsolute(size[2] / 2, size[2] / 2, 0)
-        sk.addPointsAbsolute(0, size[2] / 2, size[2] / 2)
-        sk.addPointsAbsolute(0, 0, size[2])
-
-        face = geompy.MakeFaceWires([sk.wire()], 1)
-        rombusbbox = geompy.MakePrismVecH(face, geompy.MakeVectorDXDYDZ(1, 1, 0), size[0])
-        rombusbbox = geompy.MakeRotation(rombusbbox, axes[2], 45 * math.pi / 180.0)
-        rombusbbox = geompy.MakeTranslation(rombusbbox, size[0], 0, 0)
-
-        self.rombus = geompy.MakeCutList(rombusbbox, [sphere], True)
-        self.rombusbbox = rombusbbox
-
-        # Change position
-        self.spheres = geompy.MakeRotation(self.spheres, axes[2], -45 * math.pi / 180.0)
-        self.spheres = geompy.MakeTranslation(self.spheres, 0, 0.5, 0)        
-
-        self.geometry = geompy.MakeRotation(self.geometry, axes[2], -45 * math.pi / 180.0)
-        self.geometry = geompy.MakeTranslation(self.geometry, 0, 0.5, 0)
-        self.geometrybbox = geompy.MakeRotation(self.geometrybbox, axes[2], -45 * math.pi / 180.0)
-        self.geometrybbox = geompy.MakeTranslation(self.geometrybbox, 0, 0.5, 0)
-
-        self.rombus = geompy.MakeRotation(self.rombus, axes[2], -45 * math.pi / 180.0)
-        self.rombus = geompy.MakeTranslation(self.rombus, 0, 0.5, 0)
-        self.rombusbbox = geompy.MakeRotation(self.rombusbbox, axes[2], -45 * math.pi / 180.0)
-        self.rombusbbox = geompy.MakeTranslation(self.rombusbbox, 0, 0.5, 0)
-
-        
-        geompy.addToStudy(self.spheres, "spheres")
-        geompy.addToStudy(self.geometry, self.name)
-        geompy.addToStudy(self.rombus, "rombus")
-        geompy.addToStudy(rombusbbox, "rombusbbox")
-
-        return self.geometry
-
-    def boundaryCreate(self, direction):
-        """
-        Create the boundary faces from the geometry.
-
-        Parameters:
-            direction (str): Direction of the flow.
-
-                '001' for the flow with normal vector (0, 0, 1) to face.
-                '100' for the flow with normal vector (1, 0, 0) to face.
-                '111' for (1, 1, 1)
-
-        Returns:
-            boundary (dict):
-
-            {
-                "inlet": <GEOM._objref_GEOM_Object>,
-                "outlet": <GEOM._objref_GEOM_Object>,
-                "symetryPlane": <GEOM._objref_GEOM_Object>,
-                "wall": <GEOM._objref_GEOM_Object>
-            }
-
-        """
-        geompy = geomBuilder.New() 
-        rot = [0, 0, 45]
-        buffergeometry = self.geometry
-
-        if direction == "001":
-            [x, y, z, _, _, _, _, _, _] = geompy.GetPosition(self.geometry)
-            center = geompy.MakeVertex(x, y, z)
-
-            norm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 0, 0, 1))
-            
-            bnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 
-                    -math.cos((90 + rot[2]) * math.pi / 180.0), 
-                    math.sin((90 + rot[2]) * math.pi / 180.0), 0)) 
-            
-            vnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 
-                    -math.cos((0 + rot[2]) * math.pi / 180.0), 
-                    math.sin((0 + rot[2]) * math.pi / 180.0), 0))  
-
-        elif direction == "100":
-            [x, y, z, _, _, _, _, _, _] = geompy.GetPosition(self.geometry)
-            center = geompy.MakeVertex(x, y, z)
-
-            norm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 
-                    -math.cos((90 + rot[2]) * math.pi / 180.0), 
-                    math.sin((90 + rot[2]) * math.pi / 180.0), 0))
-
-            bnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 0, 0, 1))
-
-            vnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 
-                    -math.cos((0 + rot[2]) * math.pi / 180.0), 
-                    math.sin((0 + rot[2]) * math.pi / 180.0), 0))  
-
-        elif direction == "111":
-            self.geometry = self.rombus
-            [x, y, z, _, _, _, _, _, _] = geompy.GetPosition(self.geometry)
-            center = geompy.MakeVertex(x, y, z)
-
-            norm = geompy.MakeVector(center,
-                geompy.MakeVertexWithRef(center, 1, 1, 1))
-                    #-math.cos((90 + rot[2]) * math.pi / 180.0),
-                    #math.sin((90 + rot[2]) * math.pi / 180.0), math.sqrt(2) / 2))
-            
-            bnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, 1, -1, 1))
-                #    -math.cos((90 + rot[2]) * math.pi / 180.0), 
-                #    math.sin((90 + rot[2]) * math.pi / 180.0), 0)) 
-            
-            vnorm = geompy.MakeVector(center, 
-                geompy.MakeVertexWithRef(center, -1, 1, 1))
-                    #-math.cos((0 + rot[2]) * math.pi / 180.0), 
-                    #math.sin((0 + rot[2]) * math.pi / 180.0), 0)) 
-        
-        logging.info("boundaryCreate: direction = {}".format(direction))
-
-        geompy.addToStudy(norm, "normalvector")
-        geompy.addToStudy(bnorm, "bnorm")
-        geompy.addToStudy(vnorm, "vnorm")
-
-        if direction == "111":
-            box = self.rombus
-
-        else:
-            box = self.geometrybbox
-        
-        planes = geompy.ExtractShapes(box, geompy.ShapeType["FACE"], True)
-        inletplane = []
-        outletplane = []
-        hplanes = []
-        
-        fwplanes = []
-        bwplanes = []
-        lplanes = []
-        rplanes = []
-
-        for plane in planes:
-            planeNorm = geompy.GetNormal(plane)
-            
-            angle = round(abs(geompy.GetAngle(planeNorm, norm)), 0)
-
-            if angle == 0:
-                outletplane.append(plane)    
-
-            elif angle == 180:
-                inletplane.append(plane)
-
-            elif direction == "111" and (angle == 109 or angle == 71):
-                #hplanes.append(plane)
-
-                bangle = round(abs(geompy.GetAngle(planeNorm, bnorm)), 0)
-                #logging.info("bangle = {}".format(bangle))
-
-                if bangle == 0:
-                    fwplanes.append(plane)
-
-                elif bangle == 180:
-                    bwplanes.append(plane)
-
-                vangle = round(abs(geompy.GetAngle(planeNorm, vnorm)), 0)
-                #logging.info("vangle = {}".format(vangle))
-
-                if vangle == 0:
-                    lplanes.append(plane)
-
-                elif vangle == 180:
-                    rplanes.append(plane)    
-
-            elif direction == "100" or direction == "001":
-                if angle == 90:
-                    #hplanes.append(plane)
-                    
-                    bangle = round(abs(geompy.GetAngle(planeNorm, bnorm)), 0)
-                    #logging.info("bangle = {}".format(bangle))
-
-                    if bangle == 0:
-                        fwplanes.append(plane)
-
-                    elif bangle == 180:
-                        bwplanes.append(plane)
-
-                    vangle = round(abs(geompy.GetAngle(planeNorm, vnorm)), 0)
-                    #logging.info("vangle = {}".format(vangle))
-
-                    if vangle == 0:
-                        lplanes.append(plane)
-
-                    elif vangle == 180:
-                        rplanes.append(plane)
-
-
-        if salome.sg.hasDesktop():
-            salome.sg.updateObjBrowser()
-
-        logging.info("boundaryCreate: inletplanes = {}, outletplanes = {}, hplanes = {}".format(
-            len(inletplane), len(outletplane), len(hplanes)))
-
-        logging.info("boundaryCreate: fwplanes = {}, bwplanes = {}, lplanes = {}, rplanes = {}".format(
-            len(fwplanes), len(bwplanes), len(lplanes), len(rplanes)))
-        
-        
-        def createGroup(planelist, name):
-            gr = geompy.CreateGroup(self.geometry, geompy.ShapeType["FACE"], name)
-            
-            grcomp = geompy.MakeCompound(planelist)
-            grcut = geompy.MakeCutList(grcomp, [self.spheres], True)
-
-            gip = geompy.GetInPlace(self.geometry, grcut, True)
-            faces = geompy.SubShapeAll(gip, geompy.ShapeType["FACE"])
-            geompy.UnionList(gr, faces)
-
-            return gr
-
-        
-        # Main groups
-        inlet = createGroup(inletplane, "inlet")
-        outlet = createGroup(outletplane, "outlet")
-
-        # Symetry planes
-        symetryPlaneFW = createGroup(fwplanes, "symetryPlaneFW")
-        symetryPlaneBW = createGroup(bwplanes, "symetryPlaneBW")
-        symetryPlaneL = createGroup(lplanes, "symetryPlaneL")
-        symetryPlaneR = createGroup(rplanes, "symetryPlaneR")
-
-        # Wall
-        allgroup = geompy.CreateGroup(self.geometry, geompy.ShapeType["FACE"])
-        faces = geompy.SubShapeAllIDs(self.geometry, geompy.ShapeType["FACE"]) 
-        geompy.UnionIDs(allgroup, faces)
-        wall = geompy.CutListOfGroups([allgroup], 
-            [inlet, outlet, symetryPlaneFW, symetryPlaneBW, symetryPlaneL, symetryPlaneR], "wall")
-        
-        self.boundary = {
-            "inlet": inlet,
-            "outlet": outlet,
-            "symetryPlaneFW": symetryPlaneFW,
-            "symetryPlaneBW": symetryPlaneBW,
-            "symetryPlaneL": symetryPlaneL,
-            "symetryPlaneR": symetryPlaneR,
-            "wall": wall
-        }
-
-        return self.boundary
-
-    def meshCreate(self, fineness, viscousLayers=None):
-        """
-        Creates a mesh from a geometry.
-
-        Parameters:
-            fineness (int): Fineness of mesh.
-                
-                0 - Very coarse,
-                1 - Coarse,
-                2 - Moderate,
-                3 - Fine,
-                4 - Very fine.
-
-            viscousLayers (dict or None): Defines viscous layers for mesh. 
-                By default, inlets and outlets specified without layers.
-                
-                {
-                    "thickness": float,
-                    "number": int,
-                    "stretch": float
-                }
-
-        Returns:
-            Configured instance of class <SMESH.SMESH_Mesh>, containig the parameters and boundary groups.
-
-        """
-        smesh = smeshBuilder.New()
-        Fineness = { 
-            0: "Very coarse",
-            1: "Coarse",
-            2: "Moderate",
-            3: "Fine",
-            4: "Very fine"
-        }[fineness]
-
-        logging.info("meshCreate: mesh fineness - {}".format(Fineness))
-
-        mesh = smesh.Mesh(self.geometry)
-        netgen = mesh.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-
-        param = netgen.Parameters()
-        param.SetSecondOrder( 0 )
-        param.SetOptimize( 1 )
-        param.SetChordalError( -1 )
-        param.SetChordalErrorEnabled( 0 )
-        param.SetUseSurfaceCurvature( 1 )
-        param.SetFuseEdges( 1 )
-        param.SetCheckChartBoundary( 0 )
-        param.SetMinSize( 0.001 )
-        param.SetMaxSize( 0.1 )
-        param.SetFineness(fineness)
-        #param.SetGrowthRate( 0.1 )
-        #param.SetNbSegPerEdge( 5 )
-        #param.SetNbSegPerRadius( 10 )
-        param.SetQuadAllowed( 0 )
-        
-        if not viscousLayers is None:
-            logging.info("meshCreate: viscous layers params - thickness = {}, number = {}, stretch factor = {}".format(
-                viscousLayers["thickness"], viscousLayers["number"], viscousLayers["stretch"]))
-
-            vlayer = netgen.ViscousLayers(
-                viscousLayers["thickness"], 
-                viscousLayers["number"], 
-                viscousLayers["stretch"], 
-                [self.boundary["inlet"], self.boundary["outlet"]],
-                1, smeshBuilder.NODE_OFFSET)
-        
-        else:
-            logging.info("meshCreate: viscous layers are disabled")
-
-        for name, boundary in self.boundary.items():
-            mesh.GroupOnGeom(boundary, "{}_".format(name), SMESH.FACE)
-
-        self.mesh = mesh
-
-        return self.mesh
-
-    def meshCompute(self):
-        """Compute the mesh."""
-        status = self.mesh.Compute()
-        
-        if status:
-            logging.info("Mesh succesfully computed.")
-
-        else:
-            logging.warning("Mesh is not computed.")
-
-    def meshExport(self, path):
-        """
-        Export the mesh in a file in UNV format.
-
-        Parameters:
-            path (string): full path to the expected directory.
-        """
-        exportpath = os.path.join(path, "{}.unv".format(self.name))
-
-        try:
-            self.mesh.ExportUNV(exportpath)
-        
-        except:
-            logging.error("Cannot export mesh to '{}'".format(exportpath))
-
-if __name__ == "__main__":
-    # Arguments
-    buildpath = str(sys.argv[1])
-    alpha = float(sys.argv[2])
-    direction = str(sys.argv[3])
-    
-    name = "faceCenteredCubic-{}-{}".format(direction, alpha)
-
-    # Logger
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler(os.path.join(buildpath, "{}.log".format(name)))
-        ])
-    start_time = time.monotonic()
-       
-    # Simple cubic
-    fcc = faceCenteredCubic(name)
-    
-    logging.info("Creating the geometry ...")
-    fcc.geometryCreate(alpha, [0, 0])
-    
-    logging.info("Extracting boundaries ...")
-    fcc.boundaryCreate(direction)
-    
-    logging.info("Creating the mesh ...")
-    fcc.meshCreate(2, {
-        "thickness": 0.01,
-        "number": 2,
-        "stretch": 1.1
-    })
-    fcc.meshCompute()
-    
-    logging.info("Exporting the mesh ...")
-    fcc.meshExport(buildpath)
-    
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-    logging.info("Done.")
-    
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()

temp/genmesh.old.py

@@ -1,91 +0,0 @@
-import os
-import subprocess
-import multiprocessing
-import logging
-import time
-from datetime import timedelta
-
-def salome(port, src_path, build_path, coefficient, direction):
-    """
-    Run salome and terminate after.
-
-    Parameters:
-        port (int): Port for the process.
-        src_path (str): Path to the execution script.
-        build_path (str): Output path.
-    """
-    logging.info("Starting SALOME on port {}.".format(port))
-    salomelog = open("{}/salome.log".format(build_path), "a")
-
-    subprocess.run([
-        "salome", "start", 
-        "--port", str(port), 
-        "-t", src_path, 
-        "args:{},{},{}".format(build_path, coefficient, direction)
-        ], 
-        stdout=salomelog, 
-        stderr=salomelog)
-        
-    logging.info("Terminating SALOME on port {}.".format(port))
-    
-    subprocess.run([
-        "salome", "kill", 
-        str(port)
-        ],
-        stdout=salomelog,
-        stderr=salomelog)
-
-    salomelog.close()
-
-
-if __name__ == "__main__":
-    # Get main paths
-    project = os.getcwd()
-    src = os.path.join(project, "src")
-    build = os.path.join(project, "build")
-    
-    if not os.path.exists(build):
-        os.makedirs(build) 
-
-    # Logger
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/genmesh.log".format(build))
-        ])
-    start_time = time.monotonic()
-    
-    # Start in parallel
-    processes = []
-    structures = ["simpleCubic", "faceCenteredCubic"] #, "bodyCenteredCubic"]
-    directions = ["001"] #, "100", "111"]
-    coefficients = [0.1] #[ alpha * 0.01 for alpha in range(1, 13 + 1) ]
-    port = 2810
-
-    for structure in structures:
-        for direction in directions:
-            for coefficient in coefficients:
-                src_path = os.path.join(src, "{}.py".format(structure))
-                build_path = os.path.join(build, 
-                    structure, 
-                    "direction-{}".format(direction), 
-                    "alpha-{}".format(coefficient))
-                
-                if not os.path.exists(build_path):
-                    os.makedirs(build_path)
-
-                p = multiprocessing.Process(target = salome, 
-                    args = (port, src_path, build_path, coefficient, direction))
-                processes.append(p)
-                p.start()
-                logging.info("{} on port {}.".format(p, port))
-                port += 1
-
-    for process in processes:
-        process.join()
-
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-

temp/gutils.old.py

@@ -1,119 +0,0 @@
-import salome, GEOM, SMESH, SALOMEDS
-from salome.geom import geomBuilder
-from salome.smesh import smeshBuilder
-import math
-import os, sys
-import logging
-import time
-from datetime import timedelta
-
-def rotate(gobj, ang):
-    x = geompy.MakeVectorDXDYDZ(1, 0, 0),
-    y = geompy.MakeVectorDXDYDZ(0, 1, 0),
-    z = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-    # yaw
-    rotated = geompy.MakeRotation(gobj, z, ang[2])
-    # pitch
-    rotated = geompy.MakeRotation(rotated, y, ang[1])
-    # roll
-    rotated = geompy.MakeRotation(rotated, x, ang[0])
-
-    return rotated
-
-def createGroup(gobj, planelist, grains, name):
-    gr = geompy.CreateGroup(gobj, geompy.ShapeType["FACE"], name)
-
-    grcomp = geompy.MakeCompound(planelist)
-    grcut = geompy.MakeCutList(grcomp, [grains], True)
-
-    gip = geompy.GetInPlace(gobj, grcut, True)
-    faces = geompy.SubShapeAll(gip, geompy.ShapeType["FACE"])
-    geompy.UnionList(gr, faces)
-
-    return gr
-
-def boundaryCreate(gobj, dvec, grains):
-    geompy = geomBuilder.New()
-
-    xvec = geompy.MakeVector(
-        geompy.MakeVertex(0, 0, 0),
-        geompy.MakeVertex(dvec[0], dvec[1], dvec[2]))
-    xvec = rotate(dvec, self.angle)
-
-    yvec = rotate(xvec, [0.5 * math.pi, 0, 0])
-    zvec = rotate(xvec, [0, 0.5 * math.pi, 0])
-
-    logging.info("boundaryCreate: dvec = {}".format(dvec))
-
-    planes = geompy.ExtractShapes(gobj, geompy.ShapeType["FACE"], True)
-    inletplanes = []
-    outletplanes = []
-    uplanes = []
-
-    fwplanes = []
-    bwplanes = []
-    lplanes = []
-    rplanes = []
-
-    for plane in planes:
-        nvec = geompy.GetNormal(plane)
-        xang = geompy.GetAngle(nvec, xvec)
-        yang = geompy.GetAngle(nvec, yvec)
-        zang = geompy.GetAngle(nvec, zvec)
-
-        if xang == 0:
-            inletplanes.append(plane)
-
-        elif xang == 180:
-            outletplanes.append(plane)
-
-        elif yang == 0:
-            fwplanes.append(plane)
-
-        elif yang == 180:
-            bwplanes.append(plane)
-
-        elif zang == 0:
-            lplanes.append(plane)
-
-        elif zang == 180:
-            rplanes.append(plane)
-
-    logging.info(
-        "boundaryCreate: inletplanes = {}, outletplanes = {}, hplanes = {}".format(
-            len(inletplane), len(outletplane), len(hplanes)))
-
-    logging.info(
-        "boundaryCreate: fwplanes = {}, bwplanes = {}, lplanes = {}, rplanes = {}".format(
-            len(fwplanes), len(bwplanes), len(lplanes), len(rplanes)))
-
-    # Main groups
-    inlet = createGroup(gobj, inletplane, grains, "inlet")
-    outlet = createGroup(gobj, grains, outletplane, "outlet")
-
-    symetryPlaneFW = createGroup(gobj, fwplanes, grains, "symetryPlaneFW")
-    symetryPlaneBW = createGroup(gobj, bwplanes, grains, "symetryPlaneBW")
-    symetryPlaneL = createGroup(gobj, lplanes, grains, "symetryPlaneL")
-    symetryPlaneR = createGroup(gobj, rplanes, grains, "symetryPlaneR")
-
-    # wall
-    allgroup = geompy.CreateGroup(gobj, geompy.ShapeType["FACE"])
-    faces = geompy.SubShapeAllIDs(gobj, geompy.ShapeType["FACE"])
-    geompy.UnionIDs(allgroup, faces)
-    wall = geompy.CutListOfGroups([allgroup],
-        [inlet, outlet, symetryPlaneFW, symetryPlaneBW, symetryPlaneL, symetryPlaneR], "wall")
-
-    boundary = {
-        "inlet": inlet,
-        "outlet": outlet,
-        "symetryPlaneFW": symetryPlaneFW,
-        "symetryPlaneBW": symetryPlaneBW,
-        "symetryPlaneL": symetryPlaneL,
-        "symetryPlaneR": symetryPlaneR,
-        "wall": wall
-    }
-
-    return boundary
-
-

temp/mutils.old.py

@@ -1,110 +0,0 @@
-import salome, GEOM, SMESH, SALOMEDS
-from salome.geom import geomBuilder
-from salome.smesh import smeshBuilder
-import math
-import os, sys
-import logging
-import time
-from datetime import timedelta
-
-def meshCreate(gobj, boundary, fineness, viscousLayers=None):
-    """
-    Creates a mesh from a geometry.
-
-    Parameters:
-        fineness (int): Fineness of mesh.
-
-            0 - Very coarse,
-            1 - Coarse,
-            2 - Moderate,
-            3 - Fine,
-            4 - Very fine.
-
-        viscousLayers (dict or None): Defines viscous layers for mesh.
-            By default, inlets and outlets specified without layers.
-
-            {
-                "thickness": float,
-                "number": int,
-                "stretch": float
-            }
-
-    Returns:
-        Configured instance of class <SMESH.SMESH_Mesh>, containig the parameters and boundary groups.
-
-    """
-    smesh = smeshBuilder.New()
-    Fineness = {
-        0: "Very coarse",
-        1: "Coarse",
-        2: "Moderate",
-        3: "Fine",
-        4: "Very fine"
-    }[fineness]
-
-    logging.info("meshCreate: mesh fineness - {}".format(Fineness))
-
-    mesh = smesh.Mesh(gobj)
-    netgen = mesh.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-
-    param = netgen.Parameters()
-    param.SetSecondOrder( 0 )
-    param.SetOptimize( 1 )
-    param.SetChordalError( -1 )
-    param.SetChordalErrorEnabled( 0 )
-    param.SetUseSurfaceCurvature( 1 )
-    param.SetFuseEdges( 1 )
-    param.SetCheckChartBoundary( 0 )
-    param.SetMinSize( 0.01 )
-    param.SetMaxSize( 0.1 )
-    param.SetFineness(fineness)
-    #param.SetGrowthRate( 0.1 )
-    #param.SetNbSegPerEdge( 5 )
-    #param.SetNbSegPerRadius( 10 )
-    param.SetQuadAllowed( 0 )
-
-    if not viscousLayers is None:
-        logging.info("meshCreate: viscous layers params - thickness = {}, number = {}, stretch factor = {}".format(
-            viscousLayers["thickness"], viscousLayers["number"], viscousLayers["stretch"]))
-
-        vlayer = netgen.ViscousLayers(
-            viscousLayers["thickness"],
-            viscousLayers["number"],
-            viscousLayers["stretch"],
-            [boundary["inlet"], boundary["outlet"]],
-            1, smeshBuilder.NODE_OFFSET)
-
-    else:
-        logging.info("meshCreate: viscous layers are disabled")
-
-    for name, b in boundary.items():
-        mesh.GroupOnGeom(b, "{}_".format(name), SMESH.FACE)
-
-    return mesh
-
-def meshCompute(mobj):
-    """Compute the mesh."""
-    status = mobj.Compute()
-
-    if status:
-        logging.info("Mesh succesfully computed.")
-
-    else:
-        logging.warning("Mesh is not computed.")
-
-def meshExport(mobj, path):
-    """
-    Export the mesh in a file in UNV format.
-
-    Parameters:
-        path (string): full path to the expected directory.
-    """
-    exportpath = os.path.join(path, "{}.unv".format(mobj.name))
-
-    try:
-        mobj.ExportUNV(exportpath)
-
-    except:
-        logging.error("Cannot export mesh to '{}'".format(exportpath))
-
-

temp/paraview.1.py

@@ -1,190 +0,0 @@
-# state file generated using paraview version 5.8.1
-
-# ----------------------------------------------------------------
-# setup views used in the visualization
-# ----------------------------------------------------------------
-
-# trace generated using paraview version 5.8.1
-#
-# To ensure correct image size when batch processing, please search 
-# for and uncomment the line `# renderView*.ViewSize = [*,*]`
-
-#### import the simple module from the paraview
-from paraview.simple import *
-#### disable automatic camera reset on 'Show'
-paraview.simple._DisableFirstRenderCameraReset()
-
-# Create a new 'Render View'
-renderView1 = CreateView('RenderView')
-renderView1.ViewSize = [1518, 833]
-renderView1.AxesGrid = 'GridAxes3DActor'
-renderView1.CenterOfRotation = [1.9999999835818016e-05, 2.0000001541120582e-05, 9.999999747378752e-06]
-renderView1.StereoType = 'Crystal Eyes'
-renderView1.CameraPosition = [1.9999999835818016e-05, 2.0000001541120582e-05, 0.0001558028029300748]
-renderView1.CameraFocalPoint = [1.9999999835818016e-05, 2.0000001541120582e-05, 9.999999747378752e-06]
-renderView1.CameraFocalDisk = 1.0
-renderView1.CameraParallelScale = 3.773654229301616e-05
-renderView1.CameraParallelProjection = 1
-
-# init the 'GridAxes3DActor' selected for 'AxesGrid'
-renderView1.AxesGrid.Visibility = 1
-
-SetActiveView(None)
-
-# ----------------------------------------------------------------
-# setup view layouts
-# ----------------------------------------------------------------
-
-# create new layout object 'Layout #1'
-layout1 = CreateLayout(name='Layout #1')
-layout1.AssignView(0, renderView1)
-
-# ----------------------------------------------------------------
-# restore active view
-SetActiveView(renderView1)
-# ----------------------------------------------------------------
-
-# ----------------------------------------------------------------
-# setup the data processing pipelines
-# ----------------------------------------------------------------
-
-# create a new 'OpenFOAMReader'
-simplefoam = OpenFOAMReader(FileName='/home/nafaryus/projects/anisotrope-cube/build/simple/coeff-0.01/direction-100/simple.foam')
-simplefoam.CaseType = 'Decomposed Case'
-simplefoam.MeshRegions = ['internalMesh']
-simplefoam.CellArrays = ['U', 'p']
-
-# create a new 'Clip'
-clip1 = Clip(Input=simplefoam)
-clip1.ClipType = 'Plane'
-clip1.HyperTreeGridClipper = 'Plane'
-clip1.Scalars = ['POINTS', 'p']
-clip1.Value = 0.000504692076901847
-
-# init the 'Plane' selected for 'ClipType'
-clip1.ClipType.Origin = [1.999999909685357e-05, 2.0000001029529813e-05, 9.999999747378752e-06]
-clip1.ClipType.Normal = [0.0, 0.0, 1.0]
-
-# init the 'Plane' selected for 'HyperTreeGridClipper'
-clip1.HyperTreeGridClipper.Origin = [1.999999909685357e-05, 2.0000001029529813e-05, 9.999999747378752e-06]
-
-# ----------------------------------------------------------------
-# setup the visualization in view 'renderView1'
-# ----------------------------------------------------------------
-
-# show data from simplefoam
-simplefoamDisplay = Show(simplefoam, renderView1, 'UnstructuredGridRepresentation')
-
-# get color transfer function/color map for 'p'
-pLUT = GetColorTransferFunction('p')
-pLUT.RGBPoints = [-2.29675952141406e-05, 0.231373, 0.298039, 0.752941, 0.000504692076901847, 0.865003, 0.865003, 0.865003, 0.0010323517490178347, 0.705882, 0.0156863, 0.14902]
-pLUT.ScalarRangeInitialized = 1.0
-
-# get opacity transfer function/opacity map for 'p'
-pPWF = GetOpacityTransferFunction('p')
-pPWF.Points = [-2.29675952141406e-05, 0.0, 0.5, 0.0, 0.0010323517490178347, 1.0, 0.5, 0.0]
-pPWF.ScalarRangeInitialized = 1
-
-# trace defaults for the display properties.
-simplefoamDisplay.Representation = 'Surface'
-simplefoamDisplay.ColorArrayName = ['POINTS', 'p']
-simplefoamDisplay.LookupTable = pLUT
-simplefoamDisplay.OSPRayScaleArray = 'p'
-simplefoamDisplay.OSPRayScaleFunction = 'PiecewiseFunction'
-simplefoamDisplay.SelectOrientationVectors = 'U'
-simplefoamDisplay.ScaleFactor = 3.740525119155791e-06
-simplefoamDisplay.SelectScaleArray = 'p'
-simplefoamDisplay.GlyphType = 'Arrow'
-simplefoamDisplay.GlyphTableIndexArray = 'p'
-simplefoamDisplay.GaussianRadius = 1.8702625595778954e-07
-simplefoamDisplay.SetScaleArray = ['POINTS', 'p']
-simplefoamDisplay.ScaleTransferFunction = 'PiecewiseFunction'
-simplefoamDisplay.OpacityArray = ['POINTS', 'p']
-simplefoamDisplay.OpacityTransferFunction = 'PiecewiseFunction'
-simplefoamDisplay.DataAxesGrid = 'GridAxesRepresentation'
-simplefoamDisplay.PolarAxes = 'PolarAxesRepresentation'
-simplefoamDisplay.ScalarOpacityFunction = pPWF
-simplefoamDisplay.ScalarOpacityUnitDistance = 9.756969141785036e-07
-simplefoamDisplay.ExtractedBlockIndex = 1
-
-# init the 'PiecewiseFunction' selected for 'ScaleTransferFunction'
-simplefoamDisplay.ScaleTransferFunction.Points = [0.0, 0.0, 0.5, 0.0, 0.0010000000474974513, 1.0, 0.5, 0.0]
-
-# init the 'PiecewiseFunction' selected for 'OpacityTransferFunction'
-simplefoamDisplay.OpacityTransferFunction.Points = [0.0, 0.0, 0.5, 0.0, 0.0010000000474974513, 1.0, 0.5, 0.0]
-
-# show data from clip1
-clip1Display = Show(clip1, renderView1, 'UnstructuredGridRepresentation')
-
-# get color transfer function/color map for 'U'
-uLUT = GetColorTransferFunction('U')
-uLUT.RGBPoints = [0.0, 0.231373, 0.298039, 0.752941, 0.00010124565929526629, 0.865003, 0.865003, 0.865003, 0.00020249131859053257, 0.705882, 0.0156863, 0.14902]
-uLUT.ScalarRangeInitialized = 1.0
-
-# get opacity transfer function/opacity map for 'U'
-uPWF = GetOpacityTransferFunction('U')
-uPWF.Points = [0.0, 0.0, 0.5, 0.0, 0.00020249131859053257, 1.0, 0.5, 0.0]
-uPWF.ScalarRangeInitialized = 1
-
-# trace defaults for the display properties.
-clip1Display.Representation = 'Surface'
-clip1Display.ColorArrayName = ['POINTS', 'U']
-clip1Display.LookupTable = uLUT
-clip1Display.OSPRayScaleArray = 'p'
-clip1Display.OSPRayScaleFunction = 'PiecewiseFunction'
-clip1Display.SelectOrientationVectors = 'U'
-clip1Display.ScaleFactor = 3.740524778095278e-06
-clip1Display.SelectScaleArray = 'p'
-clip1Display.GlyphType = 'Arrow'
-clip1Display.GlyphTableIndexArray = 'p'
-clip1Display.GaussianRadius = 1.870262389047639e-07
-clip1Display.SetScaleArray = ['POINTS', 'p']
-clip1Display.ScaleTransferFunction = 'PiecewiseFunction'
-clip1Display.OpacityArray = ['POINTS', 'p']
-clip1Display.OpacityTransferFunction = 'PiecewiseFunction'
-clip1Display.DataAxesGrid = 'GridAxesRepresentation'
-clip1Display.PolarAxes = 'PolarAxesRepresentation'
-clip1Display.ScalarOpacityFunction = uPWF
-clip1Display.ScalarOpacityUnitDistance = 1.1332065866368908e-06
-clip1Display.ExtractedBlockIndex = 1
-
-# init the 'PiecewiseFunction' selected for 'ScaleTransferFunction'
-clip1Display.ScaleTransferFunction.Points = [-2.29675952141406e-05, 0.0, 0.5, 0.0, 0.0010323517490178347, 1.0, 0.5, 0.0]
-
-# init the 'PiecewiseFunction' selected for 'OpacityTransferFunction'
-clip1Display.OpacityTransferFunction.Points = [-2.29675952141406e-05, 0.0, 0.5, 0.0, 0.0010323517490178347, 1.0, 0.5, 0.0]
-
-# setup the color legend parameters for each legend in this view
-
-# get color legend/bar for pLUT in view renderView1
-pLUTColorBar = GetScalarBar(pLUT, renderView1)
-pLUTColorBar.Title = 'p'
-pLUTColorBar.ComponentTitle = ''
-
-# set color bar visibility
-pLUTColorBar.Visibility = 0
-
-# get color legend/bar for uLUT in view renderView1
-uLUTColorBar = GetScalarBar(uLUT, renderView1)
-uLUTColorBar.Title = 'U'
-uLUTColorBar.ComponentTitle = 'Magnitude'
-
-# set color bar visibility
-uLUTColorBar.Visibility = 1
-
-# hide data in view
-Hide(simplefoam, renderView1)
-
-# show color legend
-clip1Display.SetScalarBarVisibility(renderView1, True)
-
-# ----------------------------------------------------------------
-# setup color maps and opacity mapes used in the visualization
-# note: the Get..() functions create a new object, if needed
-# ----------------------------------------------------------------
-
-# ----------------------------------------------------------------
-# finally, restore active source
-SetActiveSource(clip1Display)
-# ----------------------------------------------------------------
-SaveScreenshot("test.png", renderView1)

temp/run.dirty.py

@@ -1,287 +0,0 @@
-import os, sys
-from collections import namedtuple
-import time
-import logging
-from datetime import timedelta
-import multiprocessing
-
-ROOT = os.getcwd()
-sys.path.append(ROOT)
-
-LOG = os.path.join(ROOT, "logs")
-BUILD = os.path.join(ROOT, "build")
-
-from src import utils
-from src import salome_utils
-
-if __name__ == "__main__":
-    
-    if not os.path.exists(LOG):
-        os.makedirs(LOG)
-
-    if not os.path.exists(BUILD):
-        os.makedirs(BUILD)
-
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/cubic.log".format(LOG))
-        ])
-    
-    start_time = time.monotonic()
-    logging.info("Started at {}".format(timedelta(seconds=start_time)))
-
-
-    #nprocs = os.cpu_count()
-    #port = 2810
-    #salomeServers = []
-    #salomeServer = namedtuple("salomeServer", ["process", "port"])
-
-    #for n in range(nprocs):
-    #    while not utils.portIsFree:
-    #        port += 1
-        
-    #    p = multiprocessing.Process(target = salome_utils.startServer, args = (port,))
-        #s = salomeServer(salome_utils.startServer(port), port)
-    #    s = salomeServer(p, port)
-
-    #    salomeServers.append(s)
-    #    port += 1
-
-    #var = []
-    
-    # TODO: pass it to samples in namedtuples
-    # get sample.directions and etc ..
-    structures = [
-        "simpleCubic", 
-        "bodyCenteredCubic", 
-        "faceCenteredCubic"
-    ]
-    directions = [
-        [1, 0, 0],
-        [0, 0, 1],
-        #[1, 1, 1]
-    ]
-
-    #cmd = """python -c
-    #\"import sys;
-    #sys.append('{}');
-    #import samples;
-    #samples.genMesh('{}', {}, {}, '{}');
-    #\"
-    #""".replace("\n", "")
-    Task = namedtuple("Task", ["structure", "coeff", "direction", "saveto"])
-    tasks = []
-
-    for structure in structures:
-        if structure == "simpleCubic":
-            theta = [c * 0.01 for c in range(1, 14)]
-
-        elif structure == "faceCenteredCubic":
-            theta = []
-
-        elif structure == "bodyCenteredCubic":
-            theta = []
-
-        for coeff in theta:
-            for direction in directions:
-                saveto = os.path.join(BUILD, structure, "coeff-{}".format(coeff),
-                    "direction-{}{}{}".format(direction[0], direction[1], direction[2]))
-
-                if not os.path.exists(saveto):
-                    os.makedirs(saveto)
-                
-                direction_ = "".join([str(coord) for coord in direction])
-                t = Task(structure, coeff, direction_, os.path.join(saveto, "mesh.unv"))
-                tasks.append(t)
-                #tasks.append(cmd.format(ROOT, structure, coeff, direction, BUILD))
-
-    logging.info("tasks: {}".format(len(tasks)))
-    #n = 0
-    #for cmd in tasks:
-    #    var.append((salomeServer[n].port, cmd))
-    #    n = n + 1 if n < 3 else 0
-
-    #for s in salomeServers:
-    #    s.process.start()
-
-    scriptpath = os.path.join(ROOT, "samples/__init__.py")
-    port = 2810
-
-    for task in tasks:
-        returncode = salome_utils.runExecute(port, scriptpath, task.structure, task.coeff, task.direction, task.saveto)
-        
-        logging.info("Return code: {}".format(returncode))
-        
-        if returncode == 1:
-            break
-    
-    #res = utils.parallel(nprocs, var, salome_utils.remote)
-    #print(res)
-    
-    #for s in salomeServers:
-    #    s.process.join()
-
-
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-"""
-if __name__ == "__main__":
-    ###
-    #   SALOME
-    #
-    # Get main paths
-    project = os.getcwd()
-    src = os.path.join(project, "src")
-    build = os.path.join(project, "build")
-    
-    if not os.path.exists(build):
-        os.makedirs(build) 
-
-    # Logger
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/genmesh.log".format(build))
-        ])
-    start_time = time.monotonic()
-    
-    # Start in parallel
-    processes = []
-    structures = ["simpleCubic", "faceCenteredCubic", "bodyCenteredCubic"]
-    directions = ["001"] #, "100", "111"]
-    coefficients = [0.1] #[ alpha * 0.01 for alpha in range(1, 13 + 1) ]
-    port = 2810
-
-    for structure in structures:
-        for direction in directions:
-            for coefficient in coefficients:
-                src_path = os.path.join(src, "{}.py".format(structure))
-                build_path = os.path.join(build, 
-                    structure, 
-                    "direction-{}".format(direction), 
-                    "alpha-{}".format(coefficient))
-                
-                if not os.path.exists(build_path):
-                    os.makedirs(build_path)
-
-                p = multiprocessing.Process(target = salome, 
-                    args = (port, src_path, build_path, coefficient, direction))
-                processes.append(p)
-                p.start()
-                logging.info("{} on port {}.".format(p, port))
-                port += 1
-
-    for process in processes:
-        process.join()
-
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-
-    
-    ###
-    #   FOAM
-    #
-    # Get main paths
-    project = os.getcwd()
-    src = os.path.join(project, "src")
-    build = os.path.join(project, "build")
-    
-    if not os.path.exists(build):
-        os.makedirs(build) 
-
-    # Logger
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/foam.log".format(build))
-        ])
-    start_time = time.monotonic()
-    
-    # Main entry
-    structures = ["simpleCubic"] #, "bc-cubic", "fc-cubic"]
-    directions = ["001"] #, "100", "111"]
-    coefficients = [0.1] #[ alpha * 0.01 for alpha in range(1, 13 + 1) ]
-
-    for structure in structures:
-        for direction in directions:
-            for coefficient in coefficients:
-                foamCase = [ "0", "constant", "system" ]
-                src_path = os.path.join(src, "{}Foam".format(structure))
-                build_path = os.path.join(build, 
-                    structure, 
-                    "direction-{}".format(direction), 
-                    "alpha-{}".format(coefficient))
-                
-                
-                logging.info("Entry with parameters: {}, direction = {}, alpha = {}".format(structure, direction, coefficient))
-
-                logging.info("Copying baseFOAM case ...")
-                for d in foamCase:
-                    if not os.path.exists(os.path.join(build_path, d)):
-                        shutil.copytree(os.path.join(src_path, d), 
-                            os.path.join(build_path, d))
-                
-                os.chdir(build_path)
-                case_path = "."
-
-                logging.info("Importing mesh to foam ...")
-                ideasUnvToFoam(case_path, "{}-{}-{}.unv".format(structure, direction, coefficient))
-                
-                logging.info("Creating patches ...")
-                createPatch(case_path)
-
-                logging.info("Scaling mesh ...")
-                transformPoints(case_path, "(1e-5 1e-5 1e-5)")
-                
-                logging.info("Checking mesh ...")
-                checkMesh(case_path)
-                
-                #logging.info("Changing mesh boundaries types ...")
-                #foamDictionarySet(case_path, "constant/polyMesh/boundary", "entry0.wall.type", "wall")
-                #foamDictionarySet(case_path, "constant/polyMesh/boundary", "entry0.symetryPlane.type", "symetryPlane")
-
-                logging.info("Decomposing case ...")
-                decomposePar(case_path)
-                
-                logging.info("Evaluating initial approximation via potentialFoam ...")
-                potentialFoam(case_path)
-                
-                logging.info("Preparing boundaryFields for simpleFoam ...")
-                for n in range(4):
-                    foamDictionarySet(case_path, "processor{}/0/U".format(n), 
-                        "boundaryField.inlet.type", "pressureInletVelocity")
-                    foamDictionarySet(case_path, "processor{}/0/U", 
-                        "boundaryField.inlet.value", "uniform (0 0 0)")
-                
-                logging.info("Calculating ...")
-                simpleFoam(case_path)
-
-                os.chdir(project)
-
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-"""

temp/run.old.sh

@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-
-ideasUnvToFoam mesh.unv
-createPatch -overwrite
-#patchSummary
-transformPoints -scale '1e-5'
-
-foamDictionary constant/polyMesh/boundary -entry entry0.cyclicPlaneL.separationVector -set '(0 1e-5 0)'
-foamDictionary constant/polyMesh/boundary -entry entry0.cyclicPlaneR.separationVector -set '(0 -1e-5 0)'
-
-checkMesh -allGeometry -allTopology | tee -a checkMesh.log
-
-#
-decomposePar
-
-mpirun -np 4 --oversubscribe potentialFoam -parallel | tee -a potentialFoam.log
-
-foamDictionary processor0/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor1/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor2/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor3/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor0/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor1/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor2/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor3/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-
-mpirun -np 4 --oversubscribe simpleFoam -parallel | tee -a simpleFoam.log

temp/run.sh

@@ -1,27 +0,0 @@
-#!/usr/bin/env bash
-
-ideasUnvToFoam mesh.unv
-createPatch -overwrite
-#patchSummary
-transformPoints -scale '1e-5'
-
-foamDictionary constant/polyMesh/boundary -entry entry0.cyclicPlaneL.separationVector -set '(0 1e-5 0)'
-foamDictionary constant/polyMesh/boundary -entry entry0.cyclicPlaneR.separationVector -set '(0 -1e-5 0)'
-
-checkMesh -allGeometry -allTopology | tee -a checkMesh.log
-
-#
-decomposePar
-
-mpirun -np 4 --oversubscribe potentialFoam -parallel | tee -a potentialFoam.log
-
-foamDictionary processor0/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor1/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor2/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor3/0/U -entry boundaryField.inlet.type -set pressureInletVelocity
-foamDictionary processor0/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor1/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor2/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-foamDictionary processor3/0/U -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-
-mpirun -np 4 --oversubscribe simpleFoam -parallel | tee -a simpleFoam.log

temp/samples.old.2/__init__.py

@@ -1,100 +0,0 @@
-from collections import namedtuple
-import os, sys
-import logging
-from pyquaternion import Quaternion
-import math
-
-ROOT = "/home/nafaryus/projects/anisotrope-cube"
-sys.path.append(ROOT)
-
-LOG = os.path.join(ROOT, "logs")
-
-import salome
-
-from simpleCubic import simpleCubic
-from faceCenteredCubic import faceCenteredCubic
-from bodyCenteredCubic import bodyCenteredCubic
-
-from src import geometry_utils
-from src import mesh_utils
-
-def genMesh(stype, theta, fillet, flowdirection, saveto):
-    _G = globals()
-
-    structure = _G.get(stype)
-
-    if structure:
-        salome.salome_init()
-
-        grains, geometry1, geometry2 = structure(theta, fillet)
-        geometry = geometry1
-        
-        if flowdirection == [1, 1, 1]:
-            geometry = geometry2
-            norm = [-1, 1, 0]
-            bcount = 6
-
-            # initial angle
-            angle = math.pi / 6
-            v1 = Quaternion(axis = norm, angle = math.pi / 2).rotate(flowdirection)
-            normvec = Quaternion(axis = flowdirection, angle = angle).rotate(v1)
-            direction = [1, 1, 1]
-
-        if flowdirection == [1, 0, 0]:
-            normvec = [0, 0, 1]
-            bcount = 4
-            direction = [1, 1, 0]
-
-        if flowdirection == [0, 0, 1]:
-            normvec = [1, 1, 0]
-            bcount = 4
-            direction = [0, 0, 1]
-        
-        #
-        #geometry = geometry_utils.geompy.RemoveExtraEdges(geometry, False) 
-
-        #
-        #boundary = geometry_utils.createBoundary(geometry, bcount, direction, normvec, grains)
-
-        fineness = 1
-        viscousLayers = {
-            "thickness": 0.0001,
-            "number": 3,
-            "stretch": 1.2
-        }
-        mesh = mesh_utils.meshCreate(geometry, boundary, fineness, viscousLayers)
-        mesh_utils.meshCompute(mesh)
-
-        mesh_utils.meshExport(mesh, saveto)
-
-        salome.salome_close()
-
-    else:
-        raise Exception("Unknown sample function")
-
-
-if __name__ == "__main__":
-    
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/cubic.log".format(LOG))
-        ])
-    
-    stype = str(sys.argv[1])
-    theta = float(sys.argv[2])
-    fillet = True if int(sys.argv[3]) == 1 else False
-    flowdirection = [int(coord) for coord in sys.argv[4]]
-    saveto = str(sys.argv[5])
-
-    logging.info("""genMesh: 
-    structure type:\t{}
-    coefficient:\t{}
-    fillet:\t{}
-    flow direction:\t{}
-    export path:\t{}""".format(stype, theta, fillet, flowdirection, saveto))
-
-    genMesh(stype, theta, fillet, flowdirection, saveto)
-

temp/samples.old.2/bodyCenteredCubic.py

@@ -1,186 +0,0 @@
-import sys 
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def bodyCenteredCubic(alpha, fillet = False):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-    V_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    V_2 = geompy.MakeVectorDXDYDZ(1, -1, 0)
-
-    L = 1.0
-    r0 = L*math.sqrt(3)/4
-    d1 = L*math.sqrt(2)
-    Pi_4 = 45*math.pi/180.0
-    n = 3
-
-    sk = geompy.Sketcher3D()
-    sk.addPointsAbsolute(0, 0, 2*L)                                                 # Vertex_1 of Rombus
-    sk.addPointsAbsolute(L, 0, L)                                                   # Vertex_2 of Rombus
-    sk.addPointsAbsolute(L, L, 0)                                                   # Vertex_3 of Rombus
-    sk.addPointsAbsolute(0, L, L)                                                   # Vertex_4 of Rombus
-    sk.addPointsAbsolute(0, 0, 2*L)                                                 # Vertex_1 of Rombus
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Extrusion_1 = geompy.MakePrismDXDYDZ(Face_1, L/2, L/2, L/2)
-
-    sk2 = geompy.Sketcher3D()
-    sk2.addPointsAbsolute(L/3, L/3, 4*L/3)                                          # Vertex_1 of Triangle
-    sk2.addPointsAbsolute(L, 0, L)                                                  # Vertex_2 of Triangle
-    sk2.addPointsAbsolute(2*L/3, 2*L/3, 2*L/3)                                      # Vertex_3 of Triangle
-    sk2.addPointsAbsolute(L/3, L/3, 4*L/3)                                          # Vertex_1 of Triangle
-    a3D_Sketcher_2 = sk2.wire()
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Extrusion_2 = geompy.MakePrismDXDYDZ(Face_2, L/2, L/2, L/2)
-
-    sk3 = geompy.Sketcher3D()
-    sk3.addPointsAbsolute(L/3, L/3, 4*L/3)                                          # Vertex_1 of Hexagon
-    sk3.addPointsAbsolute(L, 0, L)                                                  # Vertex_2 of Hexagon
-    sk3.addPointsAbsolute(4*L/3, L/3, L/3)                                          # Vertex_3 of Hexagon
-    #sk3.addPointsAbsolute(2*L/3, 2*L/3, 2*L/3)                                     # Vertex_3 of Hexagon
-    sk3.addPointsAbsolute(L, L, 0)                                                  # Vertex_4 of Hexagon
-    sk3.addPointsAbsolute(L/3, 4*L/3, L/3)                                          # Vertex_5 of Hexagon
-    sk3.addPointsAbsolute(0, L, L)                                                  # Vertex_6 of Hexagon
-    sk3.addPointsAbsolute(L/3, L/3, 4*L/3)                                          # Vertex_1 of Hexagon
-    a3D_Sketcher_3 = sk3.wire()
-    Face_3 = geompy.MakeFaceWires([a3D_Sketcher_3], 1)
-    Extrusion_3 = geompy.MakePrismDXDYDZ(Face_3, L/2, L/2, L/2)
-
-    a3D_Sketcher_4 = geompy.MakeTranslation(a3D_Sketcher_3, -L/4, -L/4, -L/4)
-    Face_4 = geompy.MakeFaceWires([a3D_Sketcher_4], 1)
-    #Extrusion_4 = geompy.MakePrismDXDYDZ(Face_4, (n-1.5)*L, (n-1.5)*L, (n-1.5)*L)   # Extrusion_3Direction
-    Vector_1 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    #Extrusion_4 = geompy.MakePrismVecH(Face_4, Vector_1, 4*(n-1.5)*r0)              # Extrusion_3Direction
-    Extrusion_4 = geompy.MakePrismVecH(Face_4, Vector_1, 4*(n-2.0)*r0)              # Extrusion_3Direction
-
-    Box_1 = geompy.MakeBoxDXDYDZ(d1, d1, L)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, Pi_4)
-    Translation_1 = geompy.MakeTranslation(Rotation_1, L, 0, 0)
-    Translation_2 = geompy.MakeTranslation(Translation_1, 0, 0, L/4)
-
-    Box_2 = geompy.MakeBoxDXDYDZ(d1/2, d1/2, L)
-    Rotation_2 = geompy.MakeRotation(Box_2, OZ, Pi_4)
-    Translation_3 = geompy.MakeTranslation(Rotation_2, L, 0, L/4)
-
-    Box_3 = geompy.MakeBoxDXDYDZ(d1/2, d1/2, L/2)
-    Rotation_3 = geompy.MakeRotation(Box_3, OZ, Pi_4)
-    Translation_4 = geompy.MakeTranslation(Rotation_3, L, 0, L/4)
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( V_1, 'V_1' )
-    geompy.addToStudy( V_2, 'V_2' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Translation_1, 'Translation_1' )
-    geompy.addToStudy( Translation_2, 'Translation_2' )
-    geompy.addToStudy( Box_2, 'Box_2' )
-    geompy.addToStudy( Rotation_2, 'Rotation_2' )
-    geompy.addToStudy( Translation_3, 'Translation_3' )
-    geompy.addToStudy( Rotation_3, 'Rotation_3' )
-    geompy.addToStudy( Translation_4, 'Translation_4' )
-
-    #geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    #geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-    geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-    #geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-    geompy.addToStudy( a3D_Sketcher_3, 'a3D_Sketcher_3' )
-    #geompy.addToStudy( Face_3, 'Face_3' )
-    #geompy.addToStudy( Extrusion_3, 'Extrusion_3' )
-    geompy.addToStudy( a3D_Sketcher_4, 'a3D_Sketcher_4' )
-    #geompy.addToStudy( Face_4, 'Face_4' )
-    geompy.addToStudy( Extrusion_4, 'Extrusion_4' )
-     
-
-    Radius = r0/(1-alpha)
-    Sphere_1 = geompy.MakeSphereR(Radius)
-    Down = geompy.MakeMultiTranslation2D(Sphere_1, OX, L, n, OY, L, n)
-    Up = geompy.MakeTranslation(Down, 0, 0, (n-1)*L)
-    Up_Down = geompy.MakeMultiTranslation1D(Down, OZ, L, n)
-    Cut_1a = geompy.MakeCutList(Translation_1, [Up_Down])
-    Cut_1b = geompy.MakeCutList(Translation_2, [Up_Down])
-    Cut_2a = geompy.MakeCutList(Translation_3, [Up_Down])
-    Cut_2b = geompy.MakeCutList(Translation_4, [Up_Down])
-    Cut_3a = geompy.MakeCutList(Extrusion_1, [Up_Down])
-    Cut_3b = geompy.MakeCutList(Extrusion_2, [Up_Down])
-    Cut_3c = geompy.MakeCutList(Extrusion_4, [Up_Down])
-    Middle = geompy.MakeTranslation(Up_Down, L/2, L/2, L/2)
-    Pore_1a = geompy.MakeCutList(Cut_1a, [Middle])
-    Pore_1b = geompy.MakeCutList(Cut_1b, [Middle])
-    Pore_2a = geompy.MakeCutList(Cut_2a, [Middle])
-    Pore_2b = geompy.MakeCutList(Cut_2b, [Middle])
-    Pore_3a = geompy.MakeCutList(Cut_3a, [Middle])
-    Pore_3b = geompy.MakeCutList(Cut_3b, [Middle])
-    Pore_3c = geompy.MakeCutList(Cut_3c, [Middle])
-
-    geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Down, 'Down_' )
-    geompy.addToStudy( Up, 'Up_' )
-    geompy.addToStudy( Up_Down, 'Up_Down_' )
-    geompy.addToStudy( Cut_1a, 'Cut_1a_' )
-    geompy.addToStudy( Cut_1b, 'Cut_1b_' )
-    geompy.addToStudy( Middle, 'Middle_' )
-    geompy.addToStudy( Pore_1a, 'Pore_1a_' )
-    geompy.addToStudy( Pore_1b, 'Pore_1b_' )
-    geompy.addToStudy( Pore_2a, 'Pore_2a_' )
-    geompy.addToStudy( Pore_2b, 'Pore_2b_' )
-    geompy.addToStudy( Pore_3a, 'Pore_3a_' )
-    geompy.addToStudy( Pore_3b, 'Pore_3b_' )
-    geompy.addToStudy( Pore_3c, 'Pore_3c_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-
-    # Preparation
-    grains = geompy.ExtractShapes(Up_Down, geompy.ShapeType["SOLID"], True)
-    grains += geompy.ExtractShapes(Middle, geompy.ShapeType["SOLID"], True)
-    grains = geompy.MakeFuseList(grains, False, False)
-    geometry1 = Pore_1a
-    geometry2 = Pore_3c
-
-    if fillet:
-        R = r0 / (1 - alpha)
-        C1 = 0.8
-        C2 = 0.05
-        alpha1 = 0.01
-        alpha2 = 0.18
-        
-        Cf = C1 + (C2 - C1) / (alpha2 - alpha1) * (alpha - alpha1)
-        R_fillet = Cf * (R - r0)
-        
-        # Scaling up
-        scale = 100
-        grains = geompy.MakeScaleTransform(grains, O, scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, scale)
-        
-        # 
-        grains = geompy.MakeFilletAll(grains, R_fillet * scale)
-        geometry1 = geompy.MakeCutList(geometry1, [grains], True)
-        geometry2 = geompy.MakeCutList(geometry2, [grains], True)
-        
-        # Scaling down
-        grains = geompy.MakeScaleTransform(grains, O, 1 / scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, 1 / scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, 1 / scale)
-
-    #
-    geompy.addToStudy(grains, "grains")
-    geompy.addToStudy(geometry1, "geometry1")
-    geompy.addToStudy(geometry2, "geometry2")
-
-    return grains, geometry1, geometry2

temp/samples.old.2/faceCenteredCubic.py

@@ -1,181 +0,0 @@
-import sys 
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def faceCenteredCubic(alpha, fillet = False):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-    V = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    V_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    V_2 = geompy.MakeVectorDXDYDZ(1, -1, 0)
-
-    L = 1.0
-    r0 = L*math.sqrt(2)/4
-    a=2*r0
-    b=L/2
-    #c=b/2
-    d = L*math.sqrt(3)
-    h = d/3
-    Pi_4 = 45*math.pi/180.0
-    n = 3                                                               # number of cubes in line
-
-    Vertex_1 = geompy.MakeVertex(-a, -a, -b)
-    Vertex_2 = geompy.MakeVertex(a, a, b)
-    Vertex_3 = geompy.MakeVertex(-b*(n-1), 0, -b*(n-2))                 # Center of Sphere_1
-    Vertex_4 = geompy.MakeVertex(-b*n, 0, -b*(n-3))                     # Center of Sphere_2
-    Vertex_5 = geompy.MakeVertex(0, 0, -b)
-
-    sk = geompy.Sketcher3D()                                            #             Rombus
-    sk.addPointsAbsolute(-b, -b, b)                                     # Vertex_1 of Rombus
-    sk.addPointsAbsolute(0, -b, 0)                                      # Vertex_2 of Rombus
-    sk.addPointsAbsolute(0, 0, -b)                                      # Vertex_3 of Rombus
-    sk.addPointsAbsolute(-b, 0, 0)                                      # Vertex_4 of Rombus
-    sk.addPointsAbsolute(-b, -b, b)                                     # Vertex_1 of Rombus
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Face_1_Up = geompy.MakeTranslation(Face_1, b, b, 0)
-    Rhombohedron = geompy.MakeHexa2Faces(Face_1, Face_1_Up)
-
-    sk_2 = geompy.Sketcher3D()                                          #             Triangle
-    sk_2.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         # Vertex_1 of Triangle
-    sk_2.addPointsAbsolute(0, -b, 0)                                    # Vertex_2 of Triangle
-    sk_2.addPointsAbsolute(-b/3, -b/3, -b/3)                            # Vertex_3 of Triangle
-    sk_2.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         # Vertex_1 of Triangle
-    a3D_Sketcher_2 = sk_2.wire() 
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Extrusion_2 = geompy.MakePrismVecH(Face_2, V, h)
-
-    sk_3 = geompy.Sketcher3D()                                          #             Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         # Vertex_1 of Hexagon
-    sk_3.addPointsAbsolute(0, -b, 0)                                    # Vertex_2 of Hexagon
-    sk_3.addPointsAbsolute(b/3, -2*b/3, -2*b/3)                         # Vertex_3 of Hexagon
-    sk_3.addPointsAbsolute(0, 0, -b)                                    # Vertex_4 of Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, b/3, -2*b/3)                         # Vertex_5 of Hexagon
-    sk_3.addPointsAbsolute(-b, 0, 0)                                    # Vertex_6 of Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         # Vertex_1 of Hexagon
-    a3D_Sketcher_3 = sk_3.wire() 
-    Face_3 = geompy.MakeFaceWires([a3D_Sketcher_3], 1)
-    Extrusion_3 = geompy.MakePrismVecH(Face_3, V, h)
-
-    Translation_1 = geompy.MakeTranslation(a3D_Sketcher_3, -(n-2)*L/3, -(n-2)*L/3, -(n-2)*L/3)
-    Face_4 = geompy.MakeFaceWires([Translation_1], 1)
-    Vector_1 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    Extrusion_4 = geompy.MakePrismVecH(Face_4, Vector_1, (2*n-3)/3.0*d)   # Extrusion_3Direction
-
-    Box_1 = geompy.MakeBoxTwoPnt(Vertex_1, Vertex_2)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, Pi_4)
-    Box_2 = geompy.MakeBoxTwoPnt(Vertex_5, Vertex_2)
-    Rotation_2 = geompy.MakeRotation(Box_2, OZ, Pi_4)
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( V_1, 'V_1' )
-    geompy.addToStudy( V_2, 'V_2' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Box_2, 'Box_2' )
-    geompy.addToStudy( Rotation_2, 'Rotation_2_' )
-
-    geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Face_1_Up, 'Face_1_Up' )
-    geompy.addToStudy( Rhombohedron, 'Rhombohedron' )
-    geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-    geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-    geompy.addToStudy( a3D_Sketcher_3, 'a3D_Sketcher_3' )
-    geompy.addToStudy( Face_3, 'Face_3' )
-    geompy.addToStudy( Extrusion_3, 'Extrusion_3' )
-    geompy.addToStudy( Face_4, 'Face_4' )
-    geompy.addToStudy( Extrusion_4, 'Extrusion_4' )
- 
-
-    Radius = r0/(1-alpha)
-    Sphere_1 = geompy.MakeSpherePntR(Vertex_3, Radius)
-    Down = geompy.MakeMultiTranslation2D(Sphere_1, V_1, a, n, V_2, a, n)
-    Up_Down = geompy.MakeMultiTranslation1D(Down, OZ, 1, n-1)
-    Cut_1 = geompy.MakeCutList(Rotation_1, [Up_Down], True)
-
-    Sphere_2 = geompy.MakeSpherePntR(Vertex_4, Radius)
-    Middle = geompy.MakeMultiTranslation2D(Sphere_2, V_1, a, n+1, V_2, a, n+1)
-    Middle_Up = geompy.MakeMultiTranslation1D(Middle, OZ, 1, n-2)
-    Cut_2 = geompy.MakeCutList(Cut_1, [Middle_Up], True)
-
-    Common = geompy.MakeCommonList([Cut_2, Rotation_2], True)
-    Pore_3 = geompy.MakeCommonList([Rhombohedron, Cut_2], True)
-
-    Cut_3 = geompy.MakeCutList(Extrusion_2, [Up_Down], True)
-    Cut_4 = geompy.MakeCutList(Cut_3, [Middle_Up], True)
-    
-    Cut_5 = geompy.MakeCutList(Extrusion_3, [Up_Down], True)
-    Cut_6 = geompy.MakeCutList(Cut_5, [Middle_Up], True)
-
-    Cut_7 = geompy.MakeCutList(Extrusion_4, [Up_Down], True)
-    Cut_8 = geompy.MakeCutList(Cut_7, [Middle_Up], True)
-
-    #geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Down, 'Down_' )
-    geompy.addToStudy( Up_Down, 'Up_Down_' )
-    geompy.addToStudy( Cut_1, 'Cut_1_' )
-    geompy.addToStudy( Middle_Up, 'Middle_Up_' )
-    geompy.addToStudy( Cut_2, 'Pore_' )
-    geompy.addToStudy( Common, 'Pore_2_' )
-    geompy.addToStudy( Pore_3, 'Pore_3_' )
-    geompy.addToStudy( Cut_4, 'Pore_3a_' )
-    geompy.addToStudy( Cut_6, 'Pore_3b_' )
-    geompy.addToStudy( Cut_8, 'Pore_3c_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-
-    # Preparation
-    grains = geompy.ExtractShapes(Up_Down, geompy.ShapeType["SOLID"], True)
-    grains += geompy.ExtractShapes(Middle_Up, geompy.ShapeType["SOLID"], True)
-    grains = geompy.MakeFuseList(grains, False, False)
-    geometry1 = Common
-    geometry2 = Cut_8
-
-    if fillet:
-        R = r0 / (1 - alpha)
-        C1 = 0.8
-        C2 = 0.05
-        alpha1 = 0.01
-        alpha2 = 0.13
-        
-        Cf = C1 + (C2 - C1) / (alpha2 - alpha1) * (alpha - alpha1)
-        R_fillet = Cf * (R - r0)
-            
-        # Scaling up
-        scale = 100
-        grains = geompy.MakeScaleTransform(grains, O, scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, scale)
-        
-        # 
-        grains = geompy.MakeFilletAll(grains, R_fillet * scale)
-        geometry1 = geompy.MakeCutList(geometry1, [grains], True)
-        geometry2 = geompy.MakeCutList(geometry2, [grains], True)
-        
-        # Scaling down
-        grains = geompy.MakeScaleTransform(grains, O, 1 / scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, 1 / scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, 1 / scale)
-
-    #
-    geompy.addToStudy(grains, "grains")
-    geompy.addToStudy(geometry1, "geometry1")
-    geompy.addToStudy(geometry2, "geometry2")
-
-    return grains, geometry1, geometry2

temp/samples.old.2/run.py

@@ -1,234 +0,0 @@
-import os, sys
-from collections import namedtuple
-import time
-import logging
-from datetime import timedelta
-import multiprocessing
-import shutil
-
-ROOT = os.getcwd()
-sys.path.append(ROOT)
-
-LOG = os.path.join(ROOT, "logs")
-BUILD = os.path.join(ROOT, "build")
-
-from src import utils
-from src import salome_utils
-from src import foam_utils
-
-def createTasks():
-    ###
-    #   Control variables
-    ##
-    structures = [
-        "simple", 
-        #"bodyCentered", 
-        #"faceCentered"
-    ]
-    directions = [
-        #[1, 0, 0],
-        [0, 0, 1],
-        #[1, 1, 1]
-    ]
-    fillet = 1
-
-    ###
-    #   Tasks
-    ##
-    Task = namedtuple("Task", ["structure", "coeff", "fillet", "direction", "saveto"])
-    tasks = []
-
-    for structure in structures:
-        if structure == "simple":
-            theta = [0.01] #[c * 0.01 for c in range(1, 28 + 1)]
-            #theta = [ 0.01, 0.28 ]
-
-        elif structure == "faceCentered":
-            #theta = [c * 0.01 for c in range(1, 13 + 1)]
-            theta = [ 0.01, 0.13 ]
-
-        elif structure == "bodyCentered":
-            #theta = [c * 0.01 for c in range(1, 18 + 1)]
-            theta = [ 0.01, 0.13, 0.14, 0.18 ]
-
-        for coeff in theta:
-            for direction in directions:
-                saveto = os.path.join(BUILD, structure, "coeff-{}".format(coeff),
-                    "direction-{}{}{}".format(direction[0], direction[1], direction[2]))
-
-                if not os.path.exists(saveto):
-                    os.makedirs(saveto)
-                
-                t = Task(structure, coeff, fillet, direction, saveto)
-                tasks.append(t)
-
-    return tasks
-
-
-def createMesh(tasks):
-    scriptpath = os.path.join(ROOT, "samples/__init__.py")
-    port = 2810
-    errors = 0
-
-    for task in tasks:
-        logging.info("-" * 80)
-        logging.info("""createMesh:
-        task:\t{} / {}""".format(tasks.index(task) + 1, len(tasks)))
-        start_time = time.monotonic()
-
-        returncode = salome_utils.runExecute(port, scriptpath, task.structure, task.coeff, task.fillet, "".join([str(coord) for coord in task.direction]), os.path.join(task.saveto, "mesh.unv"))
-        
-        end_time = time.monotonic()
-        logging.info("createMesh: elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-        logging.info("salome: return code:\t{}".format(returncode))
-
-        if returncode == 1:
-            #break
-            errors += 1
-            pass
-
-    return errors
-    
-
-def calculate(tasks):
-    foamCase = [ "0", "constant", "system" ]
-    rmDirs = ["0", "constant", "system", "postProcessing", "logs"] + [ "processor{}".format(n) for n in range(4)]
-
-    for task in tasks:
-        
-        for d in rmDirs:
-            if os.path.exists(os.path.join(task.saveto, d)):
-                shutil.rmtree(os.path.join(task.saveto, d))
-
-        for d in foamCase:
-            if not os.path.exists(os.path.join(task.saveto, d)):
-                shutil.copytree(os.path.join(ROOT, "src/cubicFoam", d), 
-                    os.path.join(task.saveto, d))
-    
-        os.chdir(task.saveto)
-        casepath = "."
-        
-        logging.info("-" * 80)
-        logging.info("""calculate: 
-        task:\t{} / {}
-        structure type:\t{}
-        coefficient:\t{}
-        flow direction:\t{}
-        path:\t{}""".format(
-            tasks.index(task) + 1, 
-            len(tasks) , 
-            task.structure, 
-            task.coeff, 
-            task.direction, 
-            task.saveto
-        ))
-
-        foam_utils.ideasUnvToFoam("mesh.unv")
-        
-        foam_utils.createPatch(dictfile = "system/createPatchDict.symetry")
-        
-        foam_utils.checkMesh()
-
-        scale = (1e-5, 1e-5, 1e-5)
-        foam_utils.transformPoints(scale)
-        
-        foam_utils.decomposePar()
-
-        foam_utils.renumberMesh()
-        
-        foam_utils.potentialFoam()
-        
-        for n in range(4):
-            foam_utils.foamDictionary("processor{}/0/U".format(n), 
-                "boundaryField.inlet.type", "pressureInletVelocity")
-            foam_utils.foamDictionary("processor{}/0/U".format(n), 
-                "boundaryField.inlet.value", "uniform (0 0 0)")
-        
-        foam_utils.simpleFoam()
-
-        os.chdir(ROOT)
-
-
-def postprocessing(tasks):
-
-    surfaceFieldValue = {}
-    porosity = {}
-
-    for task in tasks:
-        direction = "direction-{}{}{}".format(task.direction[0], task.direction[1], task.direction[2]) 
-        path = os.path.join(BUILD, task.structure, "postProcessing", direction)
-        surfaceFieldValuePath = os.path.join(task.saveto, "postProcessing", "")
-
-        if not os.path.exists(path):
-            os.makedirs(path)
-            
-        surfaceFieldValues = [ line.strip().split() for line in open(surfaceFieldValuePath, "r").readlines() ]
-
-        with open(os.path.join(path, "porosity.dat")) as io:
-            io.write("{}\t{}".format(task.coeff, surfaceFieldValues[-1][1]))
-
-
-if __name__ == "__main__":
-    
-    if not os.path.exists(LOG):
-        os.makedirs(LOG)
-
-    if not os.path.exists(BUILD):
-        os.makedirs(BUILD)
-
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler("{}/cubic.log".format(LOG))
-        ])
-    
-    # TODO: add force arg
-    Args = namedtuple("Args", ["mesh", "calc", "pp"])
-
-    if len(sys.argv) > 1:
-        action = sys.argv[1]
-        
-        if action == "mesh":
-            args = Args(True, False, False)
-
-        elif action == "calc":
-            args = Args(False, True, False)
-
-        elif action == "pp":
-            args = Args(False, False, True)
-
-        elif action == "all":
-            args = Args(True, True, True)
-
-    else:
-        args = Args(True, True, True)
-
-    tasks = createTasks()    
-    logging.info("Tasks: {}".format(len(tasks)))
-    
-    if args.mesh:
-        start_time = time.monotonic()
-        #logging.info("Started at {}".format(timedelta(seconds=start_time)))
-
-        errors = createMesh(tasks)
-        
-        end_time = time.monotonic()
-        logging.info("-" * 80)
-        logging.info("Elapsed time:\t{}".format(timedelta(seconds=end_time - start_time)))
-        logging.info("Errors:\t{}".format(errors))
-    
-    if args.calc:
-        start_time = time.monotonic()
-        #logging.info("Started at {}".format(timedelta(seconds=start_time)))
-
-        calculate(tasks)
-        
-        end_time = time.monotonic()
-        logging.info("-" * 80)
-        logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-         
-    if args.pp:
-        postprocessing(tasks)
-

temp/samples.old.2/simpleCubic.py

@@ -1,150 +0,0 @@
-import sys
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def simpleCubic(alpha, fillet = False):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-    r0 = 1.0
-    L = 2*r0
-    h = L
-    h2 = 2*h
-    d1 = L*math.sqrt(2)
-    d2 = L*math.sqrt(3)
-    d = r0/math.sqrt(3)
-    pi_4 = 45*math.pi/180.0
-    pi_2 = 90*math.pi/180.0
-    n = 3                                                             # number of cubes in line
-
-    Box_1 = geompy.MakeBoxDXDYDZ(d1, d1, h)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, pi_4)
-    Translation_2 = geompy.MakeTranslation(Rotation_1, h, 0, 0)
-    Vertex_1 = geompy.MakeVertex(h, 0, 0)
-    Vertex_2 = geompy.MakeVertex(h, h, 0)
-    Vertex_3 = geompy.MakeVertex(h, h, h)
-    Line_1 = geompy.MakeLineTwoPnt(Vertex_2, Vertex_3)
-
-    sk = geompy.Sketcher3D()
-    sk.addPointsAbsolute(0, 0, h2)                                    #             Rombus
-    sk.addPointsAbsolute(h, 0, h)                                     # Vertex_2 of Rombus
-    sk.addPointsAbsolute(h, h, 0)                                     # Vertex_3 of Rombus
-    sk.addPointsAbsolute(0, h, h)                                     # Vertex_4 of Rombus
-    sk.addPointsAbsolute(0, 0, h2)                                    # Vertex_1 of Rombus
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Vector_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    Extrusion_1 = geompy.MakePrismVecH(Face_1, Vector_1, d1)
-
-    sk_2 = geompy.Sketcher3D()                                        #             Hexagon
-    sk_2.addPointsAbsolute(L, L, L)                                   # Vertex_1 of Hexagon
-    sk_2.addPointsAbsolute(5*L/3, 2*L/3, 2*L/3)                       # Vertex_2 of Hexagon
-    sk_2.addPointsAbsolute(2*L, L, 0)                                 # Vertex_3 of Hexagon
-    sk_2.addPointsAbsolute(5*L/3, 5*L/3, -L/3)                        # Vertex_4 of Hexagon
-    sk_2.addPointsAbsolute(L, 2*L, 0)                                 # Vertex_5 of Hexagon
-    sk_2.addPointsAbsolute(2*L/3, 5*L/3, 2*L/3)                       # Vertex_6 of Hexagon
-    sk_2.addPointsAbsolute(L, L, L)                                   # Vertex_1 of Hexagon
-    a3D_Sketcher_2 = sk_2.wire()
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Vector_2 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    Extrusion_2 = geompy.MakePrismVecH(Face_2, Vector_2, d2/3)
-
-    Translation_3 = geompy.MakeTranslation(a3D_Sketcher_2, -L-L/6, -L-L/6, 0-L/6)
-    Face_3 = geompy.MakeFaceWires([Translation_3], 1)
-    Vector_2 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    #Extrusion_3 = geompy.MakePrismVecH(Face_3, Vector_2, (n-4.0/3)*d2)    # Extrusion_3Direction
-    Extrusion_3 = geompy.MakePrismVecH(Face_3, Vector_2, (n-2.0)*d2)    # Extrusion_3Direction
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( Vertex_1, 'Vertex_1' )
-    geompy.addToStudy( Vertex_2, 'Vertex_2' )
-    geompy.addToStudy( Vertex_3, 'Vertex_3' )
-    geompy.addToStudy( Line_1, 'Line_1' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Translation_2, 'Translation_2' )
-
-    geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Vector_1, 'Vector_1' )
-    geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-    geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-    geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Vector_2, 'Vector_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-    geompy.addToStudy( Translation_3, 'a3D_Sketcher_3' )
-    geompy.addToStudy( Extrusion_3, 'Extrusion_3' )
-
-    Sphere_1 = geompy.MakeSphereR(r0/(1-alpha))
-    Multi_Translation_2 = geompy.MakeMultiTranslation2D(Sphere_1, OX, L, n, OY, L, n)
-    Multi_Translation_3 = geompy.MakeMultiTranslation1D(Multi_Translation_2, OZ, L, n)
-    Cut_1 = geompy.MakeCutList(Translation_2, [Multi_Translation_3])
-    Cut_2 = geompy.MakeCutList(Extrusion_1, [Multi_Translation_3])
-    Cut_3 = geompy.MakeCutList(Extrusion_2, [Multi_Translation_3])
-    Cut_V = geompy.MakeCutList(Cut_1, [Cut_3])
-    #Cut_2.SetColor(SALOMEDS.Color(0,0,1))
-    Cut_4 = geompy.MakeCutList(Extrusion_3, [Multi_Translation_3])
-
-    geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Multi_Translation_2, 'Multi-Translation_2_'  )
-    geompy.addToStudy( Multi_Translation_3, 'Multi-Translation_3_'  )
-    geompy.addToStudy( Cut_1, 'Pore1_' )
-    geompy.addToStudy( Cut_2, 'Pore2_' )
-    geompy.addToStudy( Cut_3, 'Pore3_' )
-    geompy.addToStudy( Cut_V, 'Cut_V_' )
-    geompy.addToStudy( Cut_4, 'Pore4_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-
-    # Preparation
-    grains = geompy.ExtractShapes(Multi_Translation_3, geompy.ShapeType["SOLID"], True)
-    grains = geompy.MakeFuseList(grains, False, False)
-    geometry1 = Cut_1
-    geometry2 = Cut_4
-
-    if fillet:
-        R = r0 / (1 - alpha)
-        C1 = 0.8
-        C2 = 0.05
-        alpha1 = 0.01
-        alpha2 = 0.28
-        
-        Cf = C1 + (C2 - C1) / (alpha2 - alpha1) * (alpha - alpha1)
-        R_fillet = Cf * (R - r0)
-        
-        # Scaling up
-        scale = 100
-        grains = geompy.MakeScaleTransform(grains, O, scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, scale)
-        
-        # 
-        grains = geompy.MakeFilletAll(grains, R_fillet * scale)
-        geometry1 = geompy.MakeCutList(geometry1, [grains], True)
-        geometry2 = geompy.MakeCutList(geometry2, [grains], True)
-        
-        # Scaling down
-        grains = geompy.MakeScaleTransform(grains, O, 1 / scale)
-        geometry1 = geompy.MakeScaleTransform(geometry1, O, 1 / scale)
-        geometry2 = geompy.MakeScaleTransform(geometry2, O, 1 / scale)
-
-    #
-    geompy.addToStudy(grains, "grains")
-    geompy.addToStudy(geometry1, "geometry1")
-    geompy.addToStudy(geometry2, "geometry2")
-
-    return grains, geometry1, geometry2

temp/samples.old/bodyCenteredCubic.py

@@ -1,127 +0,0 @@
-import sys 
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def bodyCenteredCubic(alpha):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-    V_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    V_2 = geompy.MakeVectorDXDYDZ(1, -1, 0)
-
-    L = 1.0
-    L2 = L/2
-    r0 = L*math.sqrt(3)/4
-    a = L*math.sqrt(2)
-    a2 = a/2
-    h4 = L/4
-    Pi_4 = 45*math.pi/180.0
-
-    sk = geompy.Sketcher3D()
-    sk.addPointsAbsolute(0, 0, 2*L)                                     #Vertex_1 of Rombus
-    sk.addPointsAbsolute(L, 0, L)                                       #Vertex_2 of Rombus
-    sk.addPointsAbsolute(L, L, 0)                                       #Vertex_3 of Rombus
-    sk.addPointsAbsolute(0, L, L)                                       #Vertex_4 of Rombus
-    sk.addPointsAbsolute(0, 0, 2*L)                                     #Vertex_1 of Rombus
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Extrusion_1 = geompy.MakePrismDXDYDZ(Face_1, L2, L2, L2)
-
-    sk2 = geompy.Sketcher3D()
-    sk2.addPointsAbsolute(L/3, L/3, 4*L/3)                               #Vertex_1 of Rombus
-    sk2.addPointsAbsolute(L, 0, L)                                       #Vertex_2 of Rombus
-    sk2.addPointsAbsolute(2*L/3, 2*L/3, 2*L/3)                           #Vertex_3 of Rombus
-    #sk2.addPointsAbsolute(0, L, L)                                       #Vertex_4 of Rombus
-    sk2.addPointsAbsolute(L/3, L/3, 4*L/3)                               #Vertex_1 of Rombus
-    a3D_Sketcher_2 = sk2.wire()
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Extrusion_2 = geompy.MakePrismDXDYDZ(Face_2, L2, L2, L2)
-
-    Box_1 = geompy.MakeBoxDXDYDZ(a, a, L)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, Pi_4)
-    Translation_1 = geompy.MakeTranslation(Rotation_1, L, 0, 0)
-    Translation_2 = geompy.MakeTranslation(Translation_1, 0, 0, h4)
-
-    Box_2 = geompy.MakeBoxDXDYDZ(a2, a2, L)
-    Rotation_2 = geompy.MakeRotation(Box_2, OZ, Pi_4)
-    Translation_3 = geompy.MakeTranslation(Rotation_2, L, 0, h4)
-
-    Box_3 = geompy.MakeBoxDXDYDZ(a2, a2, L2)
-    Rotation_3 = geompy.MakeRotation(Box_3, OZ, Pi_4)
-    Translation_4 = geompy.MakeTranslation(Rotation_3, L, 0, h4)
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( V_1, 'V_1' )
-    geompy.addToStudy( V_2, 'V_2' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Translation_1, 'Translation_1' )
-    geompy.addToStudy( Translation_2, 'Translation_2' )
-    geompy.addToStudy( Box_2, 'Box_2' )
-    geompy.addToStudy( Rotation_2, 'Rotation_2' )
-    geompy.addToStudy( Translation_3, 'Translation_3' )
-    geompy.addToStudy( Rotation_3, 'Rotation_3' )
-    geompy.addToStudy( Translation_4, 'Translation_4' )
-
-    #geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    #geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-    #geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_1' )
-    #geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-     
-    Radius = r0/(1-alpha)
-    Sphere_1 = geompy.MakeSphereR(Radius)
-    Down = geompy.MakeMultiTranslation2D(Sphere_1, OX, L, 3, OY, L, 3)
-    Up = geompy.MakeTranslation(Down, 0, 0, 2*L)
-    Up_Down = geompy.MakeMultiTranslation1D(Down, OZ, L, 3)
-    Cut_1a = geompy.MakeCutList(Translation_1, [Up_Down])
-    Cut_1b = geompy.MakeCutList(Translation_2, [Up_Down])
-    Cut_2a = geompy.MakeCutList(Translation_3, [Up_Down])
-    Cut_2b = geompy.MakeCutList(Translation_4, [Up_Down])
-    Cut_3a = geompy.MakeCutList(Extrusion_1, [Up_Down])
-    Cut_3b = geompy.MakeCutList(Extrusion_2, [Up_Down])
-    Middle = geompy.MakeTranslation(Up_Down, L2, L2, L2)
-    Pore_1a = geompy.MakeCutList(Cut_1a, [Middle])
-    Pore_1b = geompy.MakeCutList(Cut_1b, [Middle])
-    Pore_2a = geompy.MakeCutList(Cut_2a, [Middle])
-    Pore_2b = geompy.MakeCutList(Cut_2b, [Middle])
-    Pore_3a = geompy.MakeCutList(Cut_3a, [Middle])
-    Pore_3b = geompy.MakeCutList(Cut_3b, [Middle])
-
-    geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Down, 'Down_' )
-    geompy.addToStudy( Up, 'Up_' )
-    geompy.addToStudy( Up_Down, 'Up_Down_' )
-    geompy.addToStudy( Cut_1a, 'Cut_1a_' )
-    geompy.addToStudy( Cut_1b, 'Cut_1b_' )
-    geompy.addToStudy( Middle, 'Middle_' )
-    geompy.addToStudy( Pore_1a, 'Pore_1a_' )
-    geompy.addToStudy( Pore_1b, 'Pore_1b_' )
-    geompy.addToStudy( Pore_2a, 'Pore_2a_' )
-    geompy.addToStudy( Pore_2b, 'Pore_2b_' )
-    geompy.addToStudy( Pore_3a, 'Pore_3a_' )
-    geompy.addToStudy( Pore_3b, 'Pore_3b_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-
-    # Preparation
-    grains = geompy.ExtractShapes(Up_Down, geompy.ShapeType["SOLID"], True)
-    grains += geompy.ExtractShapes(Middle, geompy.ShapeType["SOLID"], True)
-
-    grains = geompy.MakeFuseList(grains, False, False)
-
-    return grains, Pore_1a, Pore_3a

temp/samples.old/faceCenteredCubic.py

@@ -1,135 +0,0 @@
-import sys 
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def faceCenteredCubic(alpha):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-    V = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    V_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    V_2 = geompy.MakeVectorDXDYDZ(1, -1, 0)
-
-    L = 1.0
-    r0 = L*math.sqrt(2)/4
-    a=2*r0
-    b=L/2
-    #c=b/2
-    h=L/math.sqrt(3)
-    Pi_4 = 45*math.pi/180.0
-
-    Vertex_1 = geompy.MakeVertex(-a, -a, -b)
-    Vertex_2 = geompy.MakeVertex(a, a, b)
-    Vertex_3 = geompy.MakeVertex(-1, 0, -b)                             # Center of Sphere_1
-    Vertex_4 = geompy.MakeVertex(-b, 0, -0)
-    Vertex_5 = geompy.MakeVertex(0, 0, -b)
-
-    sk = geompy.Sketcher3D()                                            #            Rombus
-    sk.addPointsAbsolute(-b, -b, b)                                     #Vertex_1 of Rombus
-    sk.addPointsAbsolute(0, -b, 0)                                      #Vertex_2 of Rombus
-    sk.addPointsAbsolute(0, 0, -b)                                      #Vertex_3 of Rombus
-    sk.addPointsAbsolute(-b, 0, 0)                                      #Vertex_4 of Rombus
-    sk.addPointsAbsolute(-b, -b, b)                                     #Vertex_1 of Rombus
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Face_1_Up = geompy.MakeTranslation(Face_1, b, b, 0)
-    Rhombohedron = geompy.MakeHexa2Faces(Face_1, Face_1_Up)
-
-    sk_2 = geompy.Sketcher3D()                                          #            Triangle
-    sk_2.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         #Vertex_1 of Triangle
-    sk_2.addPointsAbsolute(0, -b, 0)                                    #Vertex_2 of Triangle
-    sk_2.addPointsAbsolute(-b/3, -b/3, -b/3)                            #Vertex_3 of Triangle
-    sk_2.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         #Vertex_1 of Triangle
-    a3D_Sketcher_2 = sk_2.wire() 
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Extrusion_2 = geompy.MakePrismVecH(Face_2, V, h)
-
-    sk_3 = geompy.Sketcher3D()                                          #            Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         #Vertex_1 of Hexagon
-    sk_3.addPointsAbsolute(0, -b, 0)                                    #Vertex_2 of Hexagon
-    sk_3.addPointsAbsolute(b/3, -2*b/3, -2*b/3)                         #Vertex_3 of Hexagon
-    sk_3.addPointsAbsolute(0, 0, -b)                                    #Vertex_4 of Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, b/3, -2*b/3)                         #Vertex_5 of Hexagon
-    sk_3.addPointsAbsolute(-b, 0, 0)                                    #Vertex_6 of Hexagon
-    sk_3.addPointsAbsolute(-2*b/3, -2*b/3, b/3)                         #Vertex_1 of Hexagon
-    a3D_Sketcher_3 = sk_3.wire() 
-    Face_3 = geompy.MakeFaceWires([a3D_Sketcher_3], 1)
-    Extrusion_3 = geompy.MakePrismVecH(Face_3, V, h)
-
-    Box_1 = geompy.MakeBoxTwoPnt(Vertex_1, Vertex_2)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, Pi_4)
-    Box_2 = geompy.MakeBoxTwoPnt(Vertex_5, Vertex_2)
-    Rotation_2 = geompy.MakeRotation(Box_2, OZ, Pi_4)
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( V_1, 'V_1' )
-    geompy.addToStudy( V_2, 'V_2' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Box_2, 'Box_2' )
-    geompy.addToStudy( Rotation_2, 'Rotation_2_' )
-
-    geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Face_1_Up, 'Face_1_Up' )
-    geompy.addToStudy( Rhombohedron, 'Rhombohedron' )
-    geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-    geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-    geompy.addToStudy( a3D_Sketcher_3, 'a3D_Sketcher_3' )
-    geompy.addToStudy( Face_3, 'Face_3' )
-    geompy.addToStudy( Extrusion_3, 'Extrusion_3' )
-     
-
-    Radius = r0/(1-alpha)
-    Sphere_1 = geompy.MakeSpherePntR(Vertex_3, Radius)
-    Down = geompy.MakeMultiTranslation2D(Sphere_1, V_1, a, 3, V_2, a, 3)
-    Up_Down = geompy.MakeMultiTranslation1D(Down, OZ, 1, 2)
-    Cut_1 = geompy.MakeCutList(Rotation_1, [Up_Down], True)
-
-    Sphere_2 = geompy.MakeSpherePntR(Vertex_4, Radius)
-    Middle = geompy.MakeMultiTranslation2D(Sphere_2, V_1, a, 2, V_2, a, 2)
-    Cut_2 = geompy.MakeCutList(Cut_1, [Middle], True)
-
-    Common = geompy.MakeCommonList([Cut_2, Rotation_2], True)
-    Pore_3 = geompy.MakeCommonList([Rhombohedron, Cut_2], True)
-
-    Cut_3 = geompy.MakeCutList(Extrusion_2, [Up_Down], True)
-    Cut_4 = geompy.MakeCutList(Cut_3, [Middle], True)
-    
-    Cut_5 = geompy.MakeCutList(Extrusion_3, [Up_Down], True)
-    Cut_6 = geompy.MakeCutList(Cut_5, [Middle], True)
-
-    #geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Down, 'Down_' )
-    geompy.addToStudy( Up_Down, 'Up_Down_' )
-    geompy.addToStudy( Cut_1, 'Cut_1_' )
-    geompy.addToStudy( Middle, 'Middle_' )
-    geompy.addToStudy( Cut_2, 'Pore_' )
-    geompy.addToStudy( Common, 'Pore_2_' )
-    geompy.addToStudy( Pore_3, 'Pore_3_' )
-    geompy.addToStudy( Cut_4, 'Pore_3a_' )
-    geompy.addToStudy( Cut_6, 'Pore_3b_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-    
-    # Preparation
-    grains = geompy.ExtractShapes(Up_Down, geompy.ShapeType["SOLID"], True)
-    grains += geompy.ExtractShapes(Middle, geompy.ShapeType["SOLID"], True)
-
-    grains = geompy.MakeFuseList(grains, False, False)
-
-    return grains, Common, Pore_3

temp/samples.old/simpleCubic.py

@@ -1,110 +0,0 @@
-import sys
-import salome
-
-salome.salome_init()
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-geompy = geomBuilder.New()
-
-def simpleCubic(alpha):
-    O = geompy.MakeVertex(0, 0, 0)
-    OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-    OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-    OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-
-    r0 = 1.0
-    L = 2*r0
-    h = L
-    h2 = 2*h
-    d1 = L*math.sqrt(2)
-    d2 = L*math.sqrt(3)
-    d = 1/math.sqrt(3)
-    pi_4 = 45*math.pi/180.0
-    pi_2 = 90*math.pi/180.0
-
-    Box_1 = geompy.MakeBoxDXDYDZ(d1, d1, h)
-    Rotation_1 = geompy.MakeRotation(Box_1, OZ, pi_4)
-    Translation_2 = geompy.MakeTranslation(Rotation_1, h, 0, 0)
-    Vertex_1 = geompy.MakeVertex(h, 0, 0)
-    Vertex_2 = geompy.MakeVertex(h, h, 0)
-    Vertex_3 = geompy.MakeVertex(h, h, h)
-    Line_1 = geompy.MakeLineTwoPnt(Vertex_2, Vertex_3)
-
-    sk = geompy.Sketcher3D()
-    sk.addPointsAbsolute(0, 0, h2)                                    #Vertex_1 of Rombus
-    sk.addPointsAbsolute(h, 0, h)                                     #Vertex_2 of Rombus
-    sk.addPointsAbsolute(h, h, 0)                                     #Vertex_3 of Rombus
-    sk.addPointsAbsolute(0, h, h)                                     #Vertex_4 of Rombus
-    sk.addPointsAbsolute(0, 0, h2)                                    #Vertex_1 of Rombus
-
-    sk_2 = geompy.Sketcher3D()
-    sk_2.addPointsAbsolute(L, L, L)                                   #Vertex_1 of Hexagon
-    sk_2.addPointsAbsolute(5*L/3, 2*L/3, 2*L/3)                       #Vertex_2 of Hexagon
-    sk_2.addPointsAbsolute(2*L, L, 0)                                 #Vertex_3 of Hexagon
-    sk_2.addPointsAbsolute(5*L/3, 5*L/3, -L/3)                        #Vertex_4 of Hexagon
-    sk_2.addPointsAbsolute(L, 2*L, 0)                                 #Vertex_5 of Hexagon
-    sk_2.addPointsAbsolute(2*L/3, 5*L/3, 2*L/3)                       #Vertex_6 of Hexagon
-    sk_2.addPointsAbsolute(L, L, L)                                   #Vertex_1 of Hexagon
-
-    a3D_Sketcher_1 = sk.wire()
-    Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-    Vector_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-    Extrusion_1 = geompy.MakePrismVecH(Face_1, Vector_1, d1)
-    a3D_Sketcher_2 = sk_2.wire()
-    Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-    Vector_2 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-    Extrusion_2 = geompy.MakePrismVecH(Face_2, Vector_2, d2/3)
-
-    geompy.addToStudy( O, 'O' )
-    geompy.addToStudy( OX, 'OX' )
-    geompy.addToStudy( OY, 'OY' )
-    geompy.addToStudy( OZ, 'OZ' )
-    geompy.addToStudy( Vertex_1, 'Vertex_1' )
-    geompy.addToStudy( Vertex_2, 'Vertex_2' )
-    geompy.addToStudy( Vertex_3, 'Vertex_3' )
-    geompy.addToStudy( Line_1, 'Line_1' )
-    geompy.addToStudy( Box_1, 'Box_1' )
-    geompy.addToStudy( Rotation_1, 'Rotation_1' )
-    geompy.addToStudy( Translation_2, 'Translation_2' )
-
-    geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-    geompy.addToStudy( Face_1, 'Face_1' )
-    geompy.addToStudy( Vector_1, 'Vector_1' )
-    geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-    geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-    geompy.addToStudy( Face_2, 'Face_2' )
-    geompy.addToStudy( Vector_2, 'Vector_2' )
-    geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-
-    Sphere_1 = geompy.MakeSphereR(r0/(1-alpha))
-    Multi_Translation_2 = geompy.MakeMultiTranslation2D(Sphere_1, OX, 2, 3, OY, 2, 3)
-    Multi_Translation_3 = geompy.MakeMultiTranslation1D(Multi_Translation_2, OZ, 2, 3)
-    Cut_1 = geompy.MakeCutList(Translation_2, [Multi_Translation_3])
-    Cut_2 = geompy.MakeCutList(Extrusion_1, [Multi_Translation_3])
-    Cut_3 = geompy.MakeCutList(Extrusion_2, [Multi_Translation_3])
-    Cut_V = geompy.MakeCutList(Cut_1, [Cut_3])
-    #Cut_2.SetColor(SALOMEDS.Color(0,0,1))
-
-    geompy.addToStudy( Sphere_1, 'Sphere_' )
-    geompy.addToStudy( Multi_Translation_2, 'Multi-Translation_2_'  )
-    geompy.addToStudy( Multi_Translation_3, 'Multi-Translation_3_'  )
-    geompy.addToStudy( Cut_1, 'Pore1_' )
-    geompy.addToStudy( Cut_2, 'Pore2_' )
-    geompy.addToStudy( Cut_3, 'Pore3_' )
-    geompy.addToStudy( Cut_V, 'Cut_V_' )
-
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()
-    
-    # Preparation
-    #Cut_1 = geompy.MakeRotation(Cut_1, OZ, -pi_4)
-
-    grains = geompy.ExtractShapes(Multi_Translation_3, geompy.ShapeType["SOLID"], True)
-
-    grains = geompy.MakeFuseList(grains, False, False)
-
-    return Multi_Translation_3, Cut_1, Cut_2

temp/samples_.py

@@ -1,84 +0,0 @@
-from src import geometry_utils
-import GEOM
-
-from src import mesh_utils
-import SMESH
-
-from src import anisotropeCubic
-import salome
-import math
-
-import samples
-
-def genMesh(ctype, theta, flowdirection):
-    _G = globals()
-    
-    #for g in _G:
-    func = _G.get(ctype)
-
-    if func:
-        salome.salome_init()
-        func(theta, flowdirection)
-        salome.salome_close()
-
-    else:
-        raise Exception("Unknown type of the sample function")
-
-
-def simpleCubic(theta, flowdirection):
-    #radius = 1
-    #stackAngle = [0.5 * math.pi, 0.5 * math.pi, 0.5 * math.pi]
-    theta = theta if theta else 0.1
-    #layers = [3, 3, 3]
-    #grains = anisotropeCubic.StructuredGrains(radius, stackAngle, theta, layers)
-    
-    #scale = [2 * math.sqrt(2), 2 * math.sqrt(2), 2]
-    flowdirection = flowdirection if flowdirection else [1, 0, 0]
-    #style = 0
-    #cubic = anisotropeCubic.AnisotropeCubic(scale, grains, style)
-    grains, cubic, _ = samples.simpleCubic(theta)
-    boundary = geometry_utils.boundaryCreate(cubic, flowdirection, grains)
-    
-    fineness = 3
-    mesh = mesh_utils.meshCreate(cubic, boundary, fineness)
-    mesh_utils.meshCompute(mesh)
-
-
-def bodyCenteredCubic(theta, flowdirection):
-    #radius = 1
-    #stackAngle = [0.5 * math.pi, 0.25 * math.pi, 0.25 * math.pi]
-    theta = theta if theta else 0.1
-    #layers = [3, 3, 3]
-    #grains = anisotropeCubic.StructuredGrains(radius, stackAngle, theta, layers)
-    
-    #scale = [2 / math.sqrt(2), 2 / math.sqrt(2), 1]
-    flowdirection = flowdirection if flowdirection else [1, 0, 0]
-    #style = 0
-    #cubic = anisotropeCubic.AnisotropeCubic(scale, grains, style)
-    grains, cubic, _ = samples.bodyCenteredCubic(theta)
-    boundary = geometry_utils.boundaryCreate(cubic, flowdirection, grains)
-    
-    fineness = 3
-    mesh = mesh_utils.meshCreate(cubic, boundary, fineness)
-    mesh_utils.meshCompute(mesh)
-
-
-def faceCenteredCubic(theta, flowdirection):
-    #radius = 1
-    #stackAngle = [0.5 * math.pi, 0.5 * math.pi, 0.5 * math.pi]
-    theta = theta if theta else 0.1
-    #layers = [3, 3, 3]
-    #grains = anisotropeCubic.StructuredGrains(radius, stackAngle, theta, layers)
-    
-    #scale = [1 / math.sqrt(2), 1 / math.sqrt(2), 1]
-    flowdirection = flowdirection if flowdirection else [1, 0, 0]
-    #style = 0
-    #cubic = anisotropeCubic.AnisotropeCubic(scale, grains, style)
-    grains, cubic, _ = samples.faceCenteredCubic(theta)
-    boundary = geometry_utils.boundaryCreate(cubic, flowdirection, grains)
-    
-    fineness = 3
-    mesh = mesh_utils.meshCreate(cubic, boundary, fineness)
-    mesh_utils.meshCompute(mesh)
-
-

temp/simpleCubic.old.py

@@ -1,181 +0,0 @@
-#!/usr/bin/env python
-# -*- coding: utf-8 -*-
-import salome, GEOM, SMESH, SALOMEDS
-from salome.geom import geomBuilder
-from salome.smesh import smeshBuilder
-import math
-import os, sys
-import logging
-import time
-from datetime import timedelta
-from .gutils import *
-from .mutils import *
-
-class simpleCubic:
-    def __init__(self, alpha, fillet, name = None):
-        self.name = name if type(name) != None else "simpleCubic"
-        
-        self.scale = None
-        self.angle = None
-        self.pos = None
-
-        self.geometry = None
-        self.geometrybbox = None
-        self.mesh = None
-        self.boundary = None
-        
-        self.geometry2 = None
-        self.geometry2bbox = None
-
-        self.grains = None
-
-        salome.salome_init()
-
-        """
-        Create the simple cubic geometry.
-
-        Parameters:
-            alpha (float): Sphere intersection parameter which used for cutting spheres from box.
-                
-                Radius = R0 / (1 - alpha)
-                Should be from 0.01 to 0.28
-
-            fillet (list): Fillet coefficient.
-                
-                [fillet1, fillet2]
-                0 <= fillet <= 1
-                if fillet = [0, 0] then R_fillet = 0
-
-        Returns:
-            Configured geometry.
-        """
-
-        geompy = geomBuilder.New()
-        
-        # Parameters
-        R0 = 1
-        R = R0 / (1 - alpha)
-        
-        C1 = fillet[0]
-        C2 = fillet[1]
-        alpha1 = 0.01
-        alpha2 = 0.28
-        
-        Cf = C1 + (C2 - C1) / (alpha2 - alpha1) * (alpha - alpha1)
-        R_fillet = Cf * (R0 * math.sqrt(2) - R)
-        
-        logging.info("geometryCreate: alpha = {}".format(alpha))
-        logging.info("geometryCreate: R_fillet = {}".format(R_fillet))
-
-        self.scale = [2 * math.sqrt(2), 2 * math.sqrt(2), 2]
-        self.angle = [0, 0, 0.25 * math.pi]
-        self.pos = [2, 0, 0]
-        
-        # Box
-        box = geompy.MakeBoxDXDYDZ(scale[0], scale[1], scale[2])
-        box = rotate(box, angle)
-        box = geompy.MakeTranslation(box, pos[0], pos[1], pos[2])
-        
-        self.geometrybbox = box
-        
-        # Grains
-        stackang = [
-            0.5 * math.pi - stackAng[0], 
-            0.5 * math.pi - stackAng[1], 
-            0.5 * math.pi - stackAng[2]
-        ]
-        
-        xvec = geompy.MakeVector(
-            geompy.MakeVertex(0, 0, 0),
-            geompy.MakeVertex(1, 0, 0))
-        yvec = rotate(xvec, [0.5 * math.pi, 0, 0])
-        zvec = rotate(xvec, [0, 0.5 * math.pi, 0])
-        
-        hvec = rotate(xvec, [stackang[0], 0, 0])
-        vvec = rotate(zvec, [0, stackang[1], stackang[2]])
-        
-        grain = geompy.MakeSpherePntR(geompy.MakeVertex(pos[0], pos[1], pos[2]), R)
-        hstack = geompy.MakeMultiTranslation1D(grain, hvec, 2 * R0, 3)
-        vstack = geompy.MakeMultiTranslation1D(hstack, vvec, 2 * Ro, 3)
-        stack = geompy.MakeTranslation(vstack, -2 * R0, 0, 0)
-        
-        self.grains = geompy.ExtractShapes(stack, geompy.ShapeType["SOLID"], True)
-
-        self.grains = geompy.MakeFuseList(self.grains, False, False)
-                
-        if not R_fillet == 0:
-            self.grains = geompy.MakeFilletAll(self.grains, R_fillet)
-        
-        # Geometry 1
-        self.geometry = geompy.MakeCutList(box, [self.grains], True)
-        
-        # Rhombohedron
-        h = 2
-        
-        sk = geompy.Sketcher3D()
-        sk.addPointsAbsolute(0, 0, h * 2)
-        sk.addPointsAbsolute(h, 0, h)
-        sk.addPointsAbsolute(h, h, 0) 
-        sk.addPointsAbsolute(0, h, h)
-        sk.addPointsAbsolute(0, 0, h * 2)
-
-        rhombus = sk.wire()
-        rhombus = geompy.MakeFaceWires([rombus], 1)
-        vec = geompy.MakeVectorDXDYDZ(1, 1, 0)
-        rhombohedron = geompy.MakePrismVecH(rombus, vec, self.scale[0])
-        
-        self.geometry2bbox = rhombohedron
-        
-        # Geometry 2
-        self.geometry2 = geompy.MakeCutList(rhombohedron, [self.grains], True)
-        
-        # Debug study
-        geompy.addToStudy(self.grains, "grains")
-        geompy.addToStudy(self.geometry, self.name)
-        geompy.addToStudy(self.geometrybbox, "bbox 1")
-        geompy.addToStudy(self.geometry2, "geometry 2")
-        geompy.addToStudy(self.geometry2bbox, "bbox 2")
-
-
-if __name__ == "__main__":
-    # Arguments
-    buildpath = str(sys.argv[1])
-    alpha = float(sys.argv[2])
-    direction = str(sys.argv[3])
-    
-    name = "simpleCubic-{}-{}".format(direction, alpha)
-
-    # Logger
-    logging.basicConfig(
-        level=logging.INFO, 
-        format="%(levelname)s: %(message)s",
-        handlers = [
-            logging.StreamHandler(),
-            logging.FileHandler(os.path.join(buildpath, "{}.log".format(name)))
-        ])
-    start_time = time.monotonic()
-       
-    # Simple cubic
-    logging.info("Creating the geometry ...")
-    sc = simpleCubic(alpha, [0, 0], name)
-    
-    logging.info("Extracting boundaries ...")
-    boundary = sc.boundaryCreate(sc.geometry, direction, sc.grains)
-    
-    logging.info("Creating the mesh ...")
-    mesh = sc.meshCreate(sc.geometry, boundary, 2) #, {
-    #    "thickness": 0.001,
-    #    "number": 1,
-    #    "stretch": 1.1
-    #})
-    meshCompute(mesh)
-    
-    logging.info("Exporting the mesh ...")
-    meshExport(mesh, buildpath)
-    
-    end_time = time.monotonic()
-    logging.info("Elapsed time: {}".format(timedelta(seconds=end_time - start_time)))
-    logging.info("Done.")
-    
-    if salome.sg.hasDesktop():
-        salome.sg.updateObjBrowser()

temp/splitpyramids.py

@@ -1,314 +0,0 @@
-#!/usr/bin/env python
-
-###
-### This file is generated automatically by SALOME v9.6.0 with dump python functionality
-###
-
-import sys
-import salome
-
-salome.salome_init()
-import salome_notebook
-notebook = salome_notebook.NoteBook()
-sys.path.insert(0, r'/home/nafaryus/projects/anisotrope-cube/temp')
-
-###
-### GEOM component
-###
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-
-geompy = geomBuilder.New()
-
-geomObj_1 = geompy.MakeVertex(0, 0, 0)
-
-sk = geompy.Sketcher3D()
-sk.addPointsAbsolute(-0.6666667, -0.6666667, -0.1666667)
-sk.addPointsAbsolute(-0.3333333, -0.8333333, -0.3333333)
-sk.addPointsAbsolute(-0.1666667, -0.6666667, -0.6666667)
-sk.addPointsAbsolute(-0.3333333, -0.3333333, -0.8333333)
-sk.addPointsAbsolute(-0.6666667, -0.1666667, -0.6666667)
-sk.addPointsAbsolute(-0.8333333, -0.3333333, -0.3333333)
-sk.addPointsAbsolute(-0.6666667, -0.6666667, -0.1666667)
-geomObj_2 = sk.wire()
-geomObj_3 = geompy.MakeFaceWires([geomObj_2], 0)
-geomObj_4 = geompy.GetNormal(geomObj_3)
-geomObj_5 = geompy.MakePrismVecH(geomObj_3, geomObj_4, 1.732050807568877)
-geomObj_6 = geompy.MakeScaleTransform(geomObj_3, geomObj_1, 100)
-geomObj_7 = geompy.MakeScaleTransform(geomObj_5, geomObj_1, 100)
-[geomObj_8,geomObj_9,geomObj_10,geomObj_11,geomObj_12,geomObj_13,geomObj_14,geomObj_15] = geompy.ExtractShapes(geomObj_7, geompy.ShapeType["FACE"], False)
-geomObj_16 = geompy.GetNormal(geomObj_8)
-geomObj_17 = geompy.GetNormal(geomObj_9)
-geomObj_18 = geompy.GetNormal(geomObj_10)
-geomObj_19 = geompy.GetNormal(geomObj_11)
-geomObj_20 = geompy.GetNormal(geomObj_12)
-geomObj_21 = geompy.GetNormal(geomObj_13)
-geomObj_22 = geompy.GetNormal(geomObj_14)
-geomObj_23 = geompy.GetNormal(geomObj_15)
-geomObj_24 = geompy.MakeVectorDXDYDZ(1, 0, 0)
-geomObj_25 = geompy.MakeVectorDXDYDZ(0, 1, 0)
-geomObj_26 = geompy.MakeVectorDXDYDZ(0, 0, 1)
-geomObj_27 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-geomObj_28 = geompy.MakeVectorDXDYDZ(1, -1, 0)
-geomObj_29 = geompy.MakeVertex(-1, 0, -0.5)
-geomObj_30 = geompy.MakeSpherePntR(geomObj_29, 0.3761206282907168)
-geomObj_31 = geompy.MakeMultiTranslation2D(geomObj_30, geomObj_27, 0.7071067811865476, 3, geomObj_28, 0.7071067811865476, 3)
-geomObj_32 = geompy.MakeMultiTranslation1D(geomObj_31, geomObj_26, 1, 2)
-[geomObj_33,geomObj_34,geomObj_35,geomObj_36,geomObj_37,geomObj_38,geomObj_39,geomObj_40,geomObj_41,geomObj_42,geomObj_43,geomObj_44,geomObj_45,geomObj_46,geomObj_47,geomObj_48,geomObj_49,geomObj_50] = geompy.ExtractShapes(geomObj_32, geompy.ShapeType["SOLID"], True)
-geomObj_51 = geompy.MakeVertex(-1.5, 0, -1)
-geomObj_52 = geompy.MakeSpherePntR(geomObj_51, 0.3761206282907168)
-geomObj_53 = geompy.MakeMultiTranslation2D(geomObj_52, geomObj_27, 0.7071067811865476, 4, geomObj_28, 0.7071067811865476, 4)
-geomObj_54 = geompy.MakeMultiTranslation1D(geomObj_53, geomObj_26, 1, 3)
-[geomObj_55,geomObj_56,geomObj_57,geomObj_58,geomObj_59,geomObj_60,geomObj_61,geomObj_62,geomObj_63,geomObj_64,geomObj_65,geomObj_66,geomObj_67,geomObj_68,geomObj_69,geomObj_70,geomObj_71,geomObj_72,geomObj_73,geomObj_74,geomObj_75,geomObj_76,geomObj_77,geomObj_78,geomObj_79,geomObj_80,geomObj_81,geomObj_82,geomObj_83,geomObj_84,geomObj_85,geomObj_86,geomObj_87,geomObj_88,geomObj_89,geomObj_90,geomObj_91,geomObj_92,geomObj_93,geomObj_94,geomObj_95,geomObj_96,geomObj_97,geomObj_98,geomObj_99,geomObj_100,geomObj_101,geomObj_102] = geompy.ExtractShapes(geomObj_54, geompy.ShapeType["SOLID"], True)
-geomObj_103 = geompy.MakeFuseList([geomObj_33, geomObj_34, geomObj_35, geomObj_36, geomObj_37, geomObj_38, geomObj_39, geomObj_40, geomObj_41, geomObj_42, geomObj_43, geomObj_44, geomObj_45, geomObj_46, geomObj_47, geomObj_48, geomObj_49, geomObj_50, geomObj_55, geomObj_56, geomObj_57, geomObj_58, geomObj_59, geomObj_60, geomObj_61, geomObj_62, geomObj_63, geomObj_64, geomObj_65, geomObj_66, geomObj_67, geomObj_68, geomObj_69, geomObj_70, geomObj_71, geomObj_72, geomObj_73, geomObj_74, geomObj_75, geomObj_76, geomObj_77, geomObj_78, geomObj_79, geomObj_80, geomObj_81, geomObj_82, geomObj_83, geomObj_84, geomObj_85, geomObj_86, geomObj_87, geomObj_88, geomObj_89, geomObj_90, geomObj_91, geomObj_92, geomObj_93, geomObj_94, geomObj_95, geomObj_96, geomObj_97, geomObj_98, geomObj_99, geomObj_100, geomObj_101, geomObj_102], False, False)
-geomObj_104 = geompy.MakeScaleTransform(geomObj_103, geomObj_1, 100)
-geomObj_105 = geompy.MakeFilletAll(geomObj_104, 0.6170130261493888)
-geomObj_106 = geompy.MakeCutList(geomObj_7, [geomObj_105])
-faceCenteredCubic = geompy.MakeScaleTransform(geomObj_106, geomObj_1, 0.01)
-geomObj_107 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geompy.UnionIDs(geomObj_107, [3, 21, 30, 35, 42, 59, 84, 89, 118, 131, 136, 177, 180, 183, 188, 203, 230, 233, 236, 247, 259, 261, 266, 270, 272, 277, 281, 296, 301, 304, 306, 311, 316, 322, 324, 338, 353, 357, 359, 362, 365, 370, 375, 380, 383, 388, 391, 398, 421, 424, 427, 438, 443, 448, 455, 460, 465, 470, 475, 480, 487, 492, 497, 504, 517, 534, 557, 561, 563, 566, 569, 577, 579, 583, 586, 588, 591, 595, 598, 602, 604])
-inlet = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_108 = geompy.MakeCutList(geomObj_6, [geomObj_105])
-geomObj_109 = geompy.MakeScaleTransform(geomObj_108, geomObj_1, 0.01)
-geomObj_110 = geompy.GetInPlace(faceCenteredCubic, geomObj_109, True)
-[geomObj_111,geomObj_112,geomObj_113,geomObj_114,geomObj_115,geomObj_116] = geompy.SubShapeAll(geomObj_110, geompy.ShapeType["FACE"])
-geompy.UnionList(inlet, [geomObj_111, geomObj_112, geomObj_113, geomObj_114, geomObj_115, geomObj_116])
-outlet = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_117 = geompy.MakeCutList(geomObj_15, [geomObj_105])
-geomObj_118 = geompy.MakeScaleTransform(geomObj_117, geomObj_1, 0.01)
-geomObj_119 = geompy.GetInPlace(faceCenteredCubic, geomObj_118, True)
-[geomObj_120,geomObj_121,geomObj_122,geomObj_123,geomObj_124,geomObj_125] = geompy.SubShapeAll(geomObj_119, geompy.ShapeType["FACE"])
-geompy.UnionList(outlet, [geomObj_120, geomObj_121, geomObj_122, geomObj_123, geomObj_124, geomObj_125])
-symetry0 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_126 = geompy.MakeCutList(geomObj_8, [geomObj_105])
-geomObj_127 = geompy.MakeScaleTransform(geomObj_126, geomObj_1, 0.01)
-geomObj_128 = geompy.GetInPlace(faceCenteredCubic, geomObj_127, True)
-[geomObj_129,geomObj_130] = geompy.SubShapeAll(geomObj_128, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry0, [geomObj_129, geomObj_130])
-symetry1 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_131 = geompy.MakeCutList(geomObj_9, [geomObj_105])
-geomObj_132 = geompy.MakeScaleTransform(geomObj_131, geomObj_1, 0.01)
-geomObj_133 = geompy.GetInPlace(faceCenteredCubic, geomObj_132, True)
-[geomObj_134,geomObj_135] = geompy.SubShapeAll(geomObj_133, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry1, [geomObj_134, geomObj_135])
-symetry2 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_136 = geompy.MakeCutList(geomObj_10, [geomObj_105])
-geomObj_137 = geompy.MakeScaleTransform(geomObj_136, geomObj_1, 0.01)
-geomObj_138 = geompy.GetInPlace(faceCenteredCubic, geomObj_137, True)
-[geomObj_139,geomObj_140] = geompy.SubShapeAll(geomObj_138, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry2, [geomObj_139, geomObj_140])
-symetry3 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_141 = geompy.MakeCutList(geomObj_11, [geomObj_105])
-geomObj_142 = geompy.MakeScaleTransform(geomObj_141, geomObj_1, 0.01)
-geomObj_143 = geompy.GetInPlace(faceCenteredCubic, geomObj_142, True)
-[geomObj_144,geomObj_145] = geompy.SubShapeAll(geomObj_143, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry3, [geomObj_144, geomObj_145])
-symetry4 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_146 = geompy.MakeCutList(geomObj_12, [geomObj_105])
-geomObj_147 = geompy.MakeScaleTransform(geomObj_146, geomObj_1, 0.01)
-geomObj_148 = geompy.GetInPlace(faceCenteredCubic, geomObj_147, True)
-[geomObj_149,geomObj_150] = geompy.SubShapeAll(geomObj_148, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry4, [geomObj_149, geomObj_150])
-symetry5 = geompy.CreateGroup(faceCenteredCubic, geompy.ShapeType["FACE"])
-geomObj_151 = geompy.MakeCutList(geomObj_13, [geomObj_105])
-geomObj_152 = geompy.MakeScaleTransform(geomObj_151, geomObj_1, 0.01)
-geomObj_153 = geompy.GetInPlace(faceCenteredCubic, geomObj_152, True)
-[geomObj_154,geomObj_155] = geompy.SubShapeAll(geomObj_153, geompy.ShapeType["FACE"])
-geompy.UnionList(symetry5, [geomObj_154, geomObj_155])
-wall = geompy.CutListOfGroups([geomObj_107], [inlet, outlet, symetry0, symetry1, symetry2, symetry3, symetry4, symetry5])
-[geomObj_107, inlet, geomObj_110, outlet, geomObj_119, symetry0, geomObj_128, symetry1, geomObj_133, symetry2, geomObj_138, symetry3, geomObj_143, symetry4, geomObj_148, symetry5, geomObj_153, wall] = geompy.GetExistingSubObjects(faceCenteredCubic, False)
-[geomObj_107, inlet, geomObj_110, outlet, geomObj_119, symetry0, geomObj_128, symetry1, geomObj_133, symetry2, geomObj_138, symetry3, geomObj_143, symetry4, geomObj_148, symetry5, geomObj_153, wall] = geompy.GetExistingSubObjects(faceCenteredCubic, False)
-[geomObj_107, inlet, geomObj_110, outlet, geomObj_119, symetry0, geomObj_128, symetry1, geomObj_133, symetry2, geomObj_138, symetry3, geomObj_143, symetry4, geomObj_148, symetry5, geomObj_153, wall] = geompy.GetExistingSubObjects(faceCenteredCubic, False)
-geompy.addToStudy( faceCenteredCubic, 'faceCenteredCubic' )
-geompy.addToStudyInFather( faceCenteredCubic, inlet, 'inlet' )
-geompy.addToStudyInFather( faceCenteredCubic, outlet, 'outlet' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry0, 'symetry0' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry1, 'symetry1' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry2, 'symetry2' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry3, 'symetry3' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry4, 'symetry4' )
-geompy.addToStudyInFather( faceCenteredCubic, symetry5, 'symetry5' )
-geompy.addToStudyInFather( faceCenteredCubic, wall, 'wall' )
-
-###
-### SMESH component
-###
-
-import  SMESH, SALOMEDS
-from salome.smesh import smeshBuilder
-
-smesh = smeshBuilder.New()
-#smesh.SetEnablePublish( False ) # Set to False to avoid publish in study if not needed or in some particular situations:
-                                 # multiples meshes built in parallel, complex and numerous mesh edition (performance)
-
-Mesh_1 = smesh.Mesh(faceCenteredCubic)
-NETGEN_1D_2D_3D = Mesh_1.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-NETGEN_3D_Parameters_1 = NETGEN_1D_2D_3D.Parameters()
-NETGEN_3D_Parameters_1.SetMaxSize( 0.05 )
-NETGEN_3D_Parameters_1.SetMinSize( 0.005 )
-NETGEN_3D_Parameters_1.SetSecondOrder( 0 )
-NETGEN_3D_Parameters_1.SetOptimize( 1 )
-NETGEN_3D_Parameters_1.SetFineness( 1 )
-NETGEN_3D_Parameters_1.SetChordalError( -1 )
-NETGEN_3D_Parameters_1.SetChordalErrorEnabled( 0 )
-NETGEN_3D_Parameters_1.SetUseSurfaceCurvature( 1 )
-NETGEN_3D_Parameters_1.SetFuseEdges( 1 )
-NETGEN_3D_Parameters_1.SetQuadAllowed( 0 )
-NETGEN_3D_Parameters_1.SetCheckChartBoundary( 88 )
-Viscous_Layers_1 = NETGEN_1D_2D_3D.ViscousLayers(0.001,2,1.2,[ 21, 35, 316, 183, 365, 380, 475, 460, 497, 448, 595, 579 ],1,smeshBuilder.SURF_OFFSET_SMOOTH)
-#Group_1 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-inlet_1 = Mesh_1.GroupOnGeom(inlet,'inlet',SMESH.FACE)
-#Group_3 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-outlet_1 = Mesh_1.GroupOnGeom(outlet,'outlet',SMESH.FACE)
-#Group_5 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry0_1 = Mesh_1.GroupOnGeom(symetry0,'symetry0',SMESH.FACE)
-#Group_7 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry1_1 = Mesh_1.GroupOnGeom(symetry1,'symetry1',SMESH.FACE)
-#Group_9 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry2_1 = Mesh_1.GroupOnGeom(symetry2,'symetry2',SMESH.FACE)
-#Group_11 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry3_1 = Mesh_1.GroupOnGeom(symetry3,'symetry3',SMESH.FACE)
-#Group_13 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry4_1 = Mesh_1.GroupOnGeom(symetry4,'symetry4',SMESH.FACE)
-#Group_15 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry5_1 = Mesh_1.GroupOnGeom(symetry5,'symetry5',SMESH.FACE)
-#Group_17 = Mesh_1.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-wall_1 = Mesh_1.GroupOnGeom(wall,'wall',SMESH.FACE)
-isDone = Mesh_1.Compute()
-[ Group_1, inlet_1, Group_3, outlet_1, Group_5, symetry0_1, Group_7, symetry1_1, Group_9, symetry2_1, Group_11, symetry3_1, Group_13, symetry4_1, Group_15, symetry5_1, Group_17, wall_1 ] = Mesh_1.GetGroups()
-Mesh_4 = smesh.Mesh()
-Mesh_2 = smesh.Mesh(faceCenteredCubic)
-status = Mesh_2.AddHypothesis(NETGEN_3D_Parameters_1)
-status = Mesh_2.AddHypothesis(Viscous_Layers_1)
-NETGEN_1D_2D_3D_1 = Mesh_2.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-#Group_1_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-inlet_2 = Mesh_2.GroupOnGeom(inlet,'inlet',SMESH.FACE)
-#Group_3_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-outlet_2 = Mesh_2.GroupOnGeom(outlet,'outlet',SMESH.FACE)
-#Group_5_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry0_2 = Mesh_2.GroupOnGeom(symetry0,'symetry0',SMESH.FACE)
-#Group_7_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry1_2 = Mesh_2.GroupOnGeom(symetry1,'symetry1',SMESH.FACE)
-#Group_9_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry2_2 = Mesh_2.GroupOnGeom(symetry2,'symetry2',SMESH.FACE)
-#Group_11_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry3_2 = Mesh_2.GroupOnGeom(symetry3,'symetry3',SMESH.FACE)
-#Group_13_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry4_2 = Mesh_2.GroupOnGeom(symetry4,'symetry4',SMESH.FACE)
-#Group_15_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-symetry5_2 = Mesh_2.GroupOnGeom(symetry5,'symetry5',SMESH.FACE)
-#Group_17_1 = Mesh_2.GroupOnGeom(__NOT__Published__Object__,'',SMESH.FACE)
-wall_2 = Mesh_2.GroupOnGeom(wall,'wall',SMESH.FACE)
-isDone = Mesh_2.Compute()
-[ Group_1_1, inlet_2, Group_3_1, outlet_2, Group_5_1, symetry0_2, Group_7_1, symetry1_2, Group_9_1, symetry2_2, Group_11_1, symetry3_2, Group_13_1, symetry4_2, Group_15_1, symetry5_2, Group_17_1, wall_2 ] = Mesh_2.GetGroups()
-[ Group_1, inlet_1, Group_3, outlet_1, Group_5, symetry0_1, Group_7, symetry1_1, Group_9, symetry2_1, Group_11, symetry3_1, Group_13, symetry4_1, Group_15, symetry5_1, Group_17, wall_1 ] = Mesh_1.GetGroups()
-[ Group_1_1, inlet_2, Group_3_1, outlet_2, Group_5_1, symetry0_2, Group_7_1, symetry1_2, Group_9_1, symetry2_2, Group_11_1, symetry3_2, Group_13_1, symetry4_2, Group_15_1, symetry5_2, Group_17_1, wall_2 ] = Mesh_2.GetGroups()
-aCriteria = []
-aCriterion = smesh.GetCriterion(SMESH.VOLUME,SMESH.FT_ElemGeomType,SMESH.FT_Undefined,SMESH.Geom_PYRAMID)
-aCriteria.append(aCriterion)
-[ Group_1_1, inlet_2, Group_3_1, outlet_2, Group_5_1, symetry0_2, Group_7_1, symetry1_2, Group_9_1, symetry2_2, Group_11_1, symetry3_2, Group_13_1, symetry4_2, Group_15_1, symetry5_2, Group_17_1, wall_2 ] = Mesh_2.GetGroups()
-Mesh_1.Clear()
-Mesh_2.Clear()
-Mesh_3 = smesh.Mesh(faceCenteredCubic)
-status = Mesh_3.AddHypothesis(NETGEN_3D_Parameters_1)
-status = Mesh_3.AddHypothesis(Viscous_Layers_1)
-NETGEN_1D_2D_3D_2 = Mesh_3.Tetrahedron(algo=smeshBuilder.NETGEN_1D2D3D)
-inlet_3 = Mesh_3.GroupOnGeom(inlet,'inlet',SMESH.FACE)
-outlet_3 = Mesh_3.GroupOnGeom(outlet,'outlet',SMESH.FACE)
-symetry0_3 = Mesh_3.GroupOnGeom(symetry0,'symetry0',SMESH.FACE)
-symetry1_3 = Mesh_3.GroupOnGeom(symetry1,'symetry1',SMESH.FACE)
-symetry2_3 = Mesh_3.GroupOnGeom(symetry2,'symetry2',SMESH.FACE)
-symetry3_3 = Mesh_3.GroupOnGeom(symetry3,'symetry3',SMESH.FACE)
-symetry4_3 = Mesh_3.GroupOnGeom(symetry4,'symetry4',SMESH.FACE)
-symetry5_3 = Mesh_3.GroupOnGeom(symetry5,'symetry5',SMESH.FACE)
-wall_3 = Mesh_3.GroupOnGeom(wall,'wall',SMESH.FACE)
-isDone = Mesh_3.Compute()
-[ smeshObj_1, inlet_3, smeshObj_2, outlet_3, smeshObj_3, symetry0_3, smeshObj_4, symetry1_3, smeshObj_5, symetry2_3, smeshObj_6, symetry3_3, smeshObj_7, symetry4_3, smeshObj_8, symetry5_3, smeshObj_9, wall_3 ] = Mesh_3.GetGroups()
-aCriteria = []
-aCriterion = smesh.GetCriterion(SMESH.VOLUME,SMESH.FT_ElemGeomType,SMESH.FT_Undefined,SMESH.Geom_PYRAMID)
-aCriteria.append(aCriterion)
-Mesh_3.SplitVolumesIntoTetra( Mesh_3.GetIDSource([ 189580, 222102, 189581, 222103, 146658, 146659, 106364, 106365, 146364, 146365, 105266, 105267, 162840, 162841, 189808, 189809, 105172, 105173, 180526, 180527, 154066, 154067, 104882, 104883, 123066, 123067, 123068, 123069, 180640, 222050, 180641, 222051, 162664, 180238, 162665, 180239, 106312, 106313, 154188, 154189, 122780, 122781, 162784, 146726, 162785, 222274, 146727, 162786, 222275, 162787, 189756, 189757, 189458, 189459, 222394, 222395 ], SMESH.VOLUME), 1 )
-[ smeshObj_1, inlet_3, smeshObj_2, outlet_3, smeshObj_3, symetry0_3, smeshObj_4, symetry1_3, smeshObj_5, symetry2_3, smeshObj_6, symetry3_3, smeshObj_7, symetry4_3, smeshObj_8, symetry5_3, smeshObj_9, wall_3 ] = Mesh_3.GetGroups()
-
-## some objects were removed
-aStudyBuilder = salome.myStudy.NewBuilder()
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_8))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_9))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_6))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_7))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_5))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_3))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_4))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_1))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-SO = salome.myStudy.FindObjectIOR(salome.myStudy.ConvertObjectToIOR(smeshObj_2))
-if SO: aStudyBuilder.RemoveObjectWithChildren(SO)
-
-## Set names of Mesh objects
-smesh.SetName(NETGEN_1D_2D_3D.GetAlgorithm(), 'NETGEN 1D-2D-3D')
-smesh.SetName(symetry1_1, 'symetry1')
-smesh.SetName(Group_9, 'Group_9')
-smesh.SetName(Viscous_Layers_1, 'Viscous Layers_1')
-smesh.SetName(NETGEN_3D_Parameters_1, 'NETGEN 3D Parameters_1')
-smesh.SetName(Group_1, 'Group_1')
-smesh.SetName(inlet_1, 'inlet')
-smesh.SetName(Group_3, 'Group_3')
-smesh.SetName(outlet_1, 'outlet')
-smesh.SetName(Group_5, 'Group_5')
-smesh.SetName(symetry0_1, 'symetry0')
-smesh.SetName(Group_7, 'Group_7')
-smesh.SetName(Mesh_1.GetMesh(), 'Mesh_1')
-smesh.SetName(Mesh_2.GetMesh(), 'Mesh_2')
-smesh.SetName(Mesh_4.GetMesh(), 'Mesh_4')
-smesh.SetName(Mesh_3.GetMesh(), 'Mesh_3')
-smesh.SetName(wall_3, 'wall')
-smesh.SetName(symetry4_3, 'symetry4')
-smesh.SetName(symetry5_3, 'symetry5')
-smesh.SetName(symetry2_3, 'symetry2')
-smesh.SetName(wall_1, 'wall')
-smesh.SetName(symetry3_3, 'symetry3')
-smesh.SetName(Group_11, 'Group_11')
-smesh.SetName(symetry2_1, 'symetry2')
-smesh.SetName(Group_13, 'Group_13')
-smesh.SetName(symetry3_1, 'symetry3')
-smesh.SetName(Group_15, 'Group_15')
-smesh.SetName(symetry1_2, 'symetry1')
-smesh.SetName(symetry4_1, 'symetry4')
-smesh.SetName(symetry1_3, 'symetry1')
-smesh.SetName(Group_9_1, 'Group_9')
-smesh.SetName(Group_17, 'Group_17')
-smesh.SetName(symetry0_2, 'symetry0')
-smesh.SetName(symetry5_1, 'symetry5')
-smesh.SetName(Group_7_1, 'Group_7')
-smesh.SetName(outlet_2, 'outlet')
-smesh.SetName(outlet_3, 'outlet')
-smesh.SetName(Group_5_1, 'Group_5')
-smesh.SetName(inlet_2, 'inlet')
-smesh.SetName(symetry0_3, 'symetry0')
-smesh.SetName(Group_3_1, 'Group_3')
-smesh.SetName(Group_1_1, 'Group_1')
-smesh.SetName(inlet_3, 'inlet')
-smesh.SetName(wall_2, 'wall')
-smesh.SetName(Group_17_1, 'Group_17')
-smesh.SetName(symetry5_2, 'symetry5')
-smesh.SetName(Group_15_1, 'Group_15')
-smesh.SetName(symetry4_2, 'symetry4')
-smesh.SetName(Group_13_1, 'Group_13')
-smesh.SetName(symetry3_2, 'symetry3')
-smesh.SetName(Group_11_1, 'Group_11')
-smesh.SetName(symetry2_2, 'symetry2')
-
-
-if salome.sg.hasDesktop():
-  salome.sg.updateObjBrowser()

temp/test.py

@@ -1,175 +0,0 @@
-#!/usr/bin/env python
-
-###
-### This file is generated automatically by SALOME v9.6.0 with dump python functionality
-###
-
-import sys
-import salome
-
-salome.salome_init()
-import salome_notebook
-notebook = salome_notebook.NoteBook()
-sys.path.insert(0, r'/home/nafaryus/projects/anisotrope-cube/build')
-
-###
-### GEOM component
-###
-
-import GEOM
-from salome.geom import geomBuilder
-import math
-import SALOMEDS
-
-
-geompy = geomBuilder.New()
-
-O = geompy.MakeVertex(0, 0, 0)
-OX = geompy.MakeVectorDXDYDZ(1, 0, 0)
-OY = geompy.MakeVectorDXDYDZ(0, 1, 0)
-OZ = geompy.MakeVectorDXDYDZ(0, 0, 1)
-Box_1 = geompy.MakeBoxDXDYDZ(2.82842712474619, 2.82842712474619, 2)
-Rotation_1 = geompy.MakeRotation(Box_1, OZ, 45*math.pi/180.0)
-Translation_2 = geompy.MakeTranslation(Rotation_1, 2, 0, 0)
-Vertex_1 = geompy.MakeVertex(2, 0, 0)
-Vertex_2 = geompy.MakeVertex(2, 2, 0)
-Vertex_3 = geompy.MakeVertex(2, 2, 2)
-Line_1 = geompy.MakeLineTwoPnt(Vertex_2, Vertex_3)
-
-sk = geompy.Sketcher3D()
-sk.addPointsAbsolute(0.0000000, 0.0000000, 4.0000000)
-sk.addPointsAbsolute(2.0000000, 0.0000000, 2.0000000)
-sk.addPointsAbsolute(2.0000000, 2.0000000, 0.0000000)
-sk.addPointsAbsolute(0.0000000, 2.0000000, 2.0000000)
-sk.addPointsAbsolute(0.0000000, 0.0000000, 4.0000000)
-a3D_Sketcher_1 = sk.wire()
-Face_1 = geompy.MakeFaceWires([a3D_Sketcher_1], 1)
-Vector_1 = geompy.MakeVectorDXDYDZ(1, 1, 0)
-Extrusion_1 = geompy.MakePrismVecH(Face_1, Vector_1, 2.82842712474619)
-
-sk = geompy.Sketcher3D()
-sk.addPointsAbsolute(2.0000000, 2.0000000, 2.0000000)
-sk.addPointsAbsolute(3.3333333, 1.3333333, 1.3333333)
-sk.addPointsAbsolute(4.0000000, 2.0000000, 0.0000000)
-sk.addPointsAbsolute(3.3333333, 3.3333333, -0.6666667)
-sk.addPointsAbsolute(2.0000000, 4.0000000, 0.0000000)
-sk.addPointsAbsolute(1.3333333, 3.3333333, 1.3333333)
-sk.addPointsAbsolute(2.0000000, 2.0000000, 2.0000000)
-a3D_Sketcher_2 = sk.wire()
-Face_2 = geompy.MakeFaceWires([a3D_Sketcher_2], 1)
-geomObj_1 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-Extrusion_2 = geompy.MakePrismVecH(Face_2, geomObj_1, 1.154700538379251)
-a3D_Sketcher_3 = geompy.MakeTranslation(a3D_Sketcher_2, -2.333333333333333, -2.333333333333333, -0.3333333333333333)
-geomObj_2 = geompy.MakeFaceWires([a3D_Sketcher_3], 1)
-Vector_2 = geompy.MakeVectorDXDYDZ(1, 1, 1)
-Extrusion_3 = geompy.MakePrismVecH(geomObj_2, Vector_2, 3.464101615137754)
-Sphere_ = geompy.MakeSphereR(1.111111111111111)
-Multi_Translation_2_ = geompy.MakeMultiTranslation2D(Sphere_, OX, 2, 3, OY, 2, 3)
-Multi_Translation_3_ = geompy.MakeMultiTranslation1D(Multi_Translation_2_, OZ, 2, 3)
-[geomObj_3,geomObj_4,geomObj_5,geomObj_6,geomObj_7,geomObj_8,geomObj_9,geomObj_10,geomObj_11,geomObj_12,geomObj_13,geomObj_14,geomObj_15,geomObj_16,geomObj_17,geomObj_18,geomObj_19,geomObj_20,geomObj_21,geomObj_22,geomObj_23,geomObj_24,geomObj_25,geomObj_26,geomObj_27,geomObj_28,geomObj_29] = geompy.ExtractShapes(Multi_Translation_3_, geompy.ShapeType["SOLID"], True)
-Pore1_ = geompy.MakeCutList(Translation_2, [Multi_Translation_3_])
-Pore2_ = geompy.MakeCutList(Extrusion_1, [Multi_Translation_3_])
-Pore3_ = geompy.MakeCutList(Extrusion_2, [Multi_Translation_3_])
-Cut_V_ = geompy.MakeCutList(Pore1_, [Pore3_])
-Pore4_ = geompy.MakeCutList(Extrusion_3, [Multi_Translation_3_])
-grains = geompy.MakeFuseList([geomObj_3, geomObj_4, geomObj_5, geomObj_6, geomObj_7, geomObj_8, geomObj_9, geomObj_10, geomObj_11, geomObj_12, geomObj_13, geomObj_14, geomObj_15, geomObj_16, geomObj_17, geomObj_18, geomObj_19, geomObj_20, geomObj_21, geomObj_22, geomObj_23, geomObj_24, geomObj_25, geomObj_26, geomObj_27, geomObj_28, geomObj_29], False, False)
-geomObj_30 = geompy.MakeMarker(0, 0, 0, 1, 0, 0, 0, 1, 0)
-
-sk = geompy.Sketcher3D()
-sk.addPointsAbsolute(2, 0, 0)
-sk.addPointsAbsolute(0, 2, 0)
-sk.addPointsAbsolute(0, 2, 2)
-sk.addPointsAbsolute(2, 0, 2)
-sk.addPointsAbsolute(2, 0, 0)
-a3D_Sketcher_1_1 = sk.wire()
-Face_3 = geompy.MakeFaceWires([a3D_Sketcher_1_1], 0)
-Vector_Normal_1 = geompy.GetNormal(Face_3)
-cuban = geompy.MakePrismVecH(Face_3, Vector_Normal_1, 2)
-
-inlet = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(inlet, [31])
-outlet = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(outlet, [33])
-sp1 = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(sp1, [20])
-sp2 = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(sp2, [3])
-sp3 = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(sp3, [27])
-sp4 = geompy.CreateGroup(cuban, geompy.ShapeType["FACE"])
-geompy.UnionIDs(sp4, [13])
-
-Cut_1 = geompy.MakeCutList(cuban, [grains])
-Cut_2 = geompy.MakeCutList(inlet, [grains])
-[geomObj_31] = geompy.SubShapeAll(Cut_2, geompy.ShapeType["FACE"])
-Cut_3 = geompy.MakeCutList(outlet, [grains])
-Cut_4 = geompy.MakeCutList(sp1, [grains])
-Cut_5 = geompy.MakeCutList(sp2, [grains])
-Cut_6 = geompy.MakeCutList(sp3, [grains])
-Cut_7 = geompy.MakeCutList(sp4, [grains])
-geomObj_32 = geompy.GetInPlace(Cut_1, Cut_2, True)
-[geomObj_33] = geompy.SubShapeAll(geomObj_32, geompy.ShapeType["FACE"])
-[geomObj_34] = geompy.SubShapeAll(geomObj_32, geompy.ShapeType["FACE"])
-inlet_1 = geompy.CreateGroup(Cut_1, geompy.ShapeType["FACE"])
-geompy.UnionIDs(inlet_1, [13])
-geomObj_35 = geompy.GetInPlace(Cut_1, Cut_3, True)
-[geomObj_36] = geompy.SubShapeAll(geomObj_35, geompy.ShapeType["FACE"])
-[geomObj_37] = geompy.SubShapeAll(geomObj_35, geompy.ShapeType["FACE"])
-outlet_1 = geompy.CreateGroup(Cut_1, geompy.ShapeType["FACE"])
-geompy.UnionIDs(outlet_1, [101])
-
-geometry1 = Pore1_
-geometry2 = Pore4_
-geompy.addToStudy( O, 'O' )
-geompy.addToStudy( OX, 'OX' )
-geompy.addToStudy( OY, 'OY' )
-geompy.addToStudy( OZ, 'OZ' )
-geompy.addToStudy( Box_1, 'Box_1' )
-geompy.addToStudy( Rotation_1, 'Rotation_1' )
-geompy.addToStudy( Translation_2, 'Translation_2' )
-geompy.addToStudy( Vertex_1, 'Vertex_1' )
-geompy.addToStudy( Vertex_2, 'Vertex_2' )
-geompy.addToStudy( Vertex_3, 'Vertex_3' )
-geompy.addToStudy( Line_1, 'Line_1' )
-geompy.addToStudy( a3D_Sketcher_1, 'a3D_Sketcher_1' )
-geompy.addToStudy( Face_1, 'Face_1' )
-geompy.addToStudy( Vector_1, 'Vector_1' )
-geompy.addToStudy( Extrusion_1, 'Extrusion_1' )
-geompy.addToStudy( a3D_Sketcher_2, 'a3D_Sketcher_2' )
-geompy.addToStudy( Face_2, 'Face_2' )
-geompy.addToStudy( Extrusion_2, 'Extrusion_2' )
-geompy.addToStudy( a3D_Sketcher_3, 'a3D_Sketcher_3' )
-geompy.addToStudy( Vector_2, 'Vector_2' )
-geompy.addToStudy( Extrusion_3, 'Extrusion_3' )
-geompy.addToStudy( Sphere_, 'Sphere_' )
-geompy.addToStudy( Multi_Translation_2_, 'Multi-Translation_2_' )
-geompy.addToStudy( Multi_Translation_3_, 'Multi-Translation_3_' )
-geompy.addToStudy( Pore1_, 'Pore1_' )
-geompy.addToStudy( Pore2_, 'Pore2_' )
-geompy.addToStudy( Pore3_, 'Pore3_' )
-geompy.addToStudy( Cut_V_, 'Cut_V_' )
-geompy.addToStudy( Pore4_, 'Pore4_' )
-geompy.addToStudy( grains, 'grains' )
-geompy.addToStudy( a3D_Sketcher_1_1, '3D Sketcher_1' )
-geompy.addToStudy( Face_3, 'Face_3' )
-geompy.addToStudy( Vector_Normal_1, 'Vector_Normal_1' )
-geompy.addToStudy( cuban, 'cuban' )
-geompy.addToStudyInFather( cuban, inlet, 'inlet' )
-geompy.addToStudyInFather( cuban, outlet, 'outlet' )
-geompy.addToStudyInFather( cuban, sp1, 'sp1' )
-geompy.addToStudyInFather( cuban, sp2, 'sp2' )
-geompy.addToStudyInFather( cuban, sp3, 'sp3' )
-geompy.addToStudyInFather( cuban, sp4, 'sp4' )
-geompy.addToStudy( Cut_1, 'Cut_1' )
-geompy.addToStudy( Cut_2, 'Cut_2' )
-geompy.addToStudy( Cut_3, 'Cut_3' )
-geompy.addToStudy( Cut_4, 'Cut_4' )
-geompy.addToStudy( Cut_5, 'Cut_5' )
-geompy.addToStudy( Cut_6, 'Cut_6' )
-geompy.addToStudy( Cut_7, 'Cut_7' )
-geompy.addToStudyInFather( Cut_1, inlet_1, 'inlet' )
-geompy.addToStudyInFather( Cut_1, outlet_1, 'outlet' )
-
-
-if salome.sg.hasDesktop():
-  salome.sg.updateObjBrowser()

temp/tools/changeInitial.sh

@@ -1,7 +0,0 @@
-#!/usr/bin/env bash
-
-for n in {0..3}; do
-
-    foamDictionary "processor${n}/0/U" -entry boundaryField.inlet.type -set pressureInletVelocity
-    foamDictionary "processor${n}/0/U" -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-done

temp/tools/run.sh

@@ -1,37 +0,0 @@
-#!/usr/bin/env bash
-
-path=.
-#build/simple-cubic/0.1
-
-# python src/genmesh.py
-# python src/prefoam.py
-
-# Clean case directory
-rm -rf postProcessing processor* *.log logs *.obj constant/polyMesh
-
-# Export and transform mesh
-ideasUnvToFoam -case $path mesh.unv
-transformPoints -scale '(1e-5 1e-5 1e-5)'
-#polyDualMesh 70 -overwrite
-checkMesh -case $path -allGeometry -allTopology > checkMesh.log
-
-# Change boundary type for mesh
-foamDictionary -case $path constant/polyMesh/boundary -entry entry0.wall.type -set wall
-
-# Case decomposition
-decomposePar -case $path
-
-# Initial approximation
-mpirun -np 4 --oversubscribe potentialFoam -case $path -parallel | tee -a $path/potentialFoam.log
-
-# Change boundary type for simpleFoam
-for n in {0..3}; do
-
-    foamDictionary "processor${n}/0/U" -entry boundaryField.inlet.type -set pressureInletVelocity
-    foamDictionary "processor${n}/0/U" -entry boundaryField.inlet.value -set 'uniform (0 0 0)'
-done
-
-sleep 2
-# Main calculation
-mpirun -np 4 --oversubscribe simpleFoam -parallel -case $path | tee -a $path/simpleFoam.log
-