*** empty log message ***

configure.ac

@@ -9,18 +9,13 @@
 #
 
 
-AC_INIT([Salome2 Project GEOM module], [4.0.0], [gboulant@CS], [salome])
+AC_INIT([Salome2 Project GEOM module], [5.0.0], [webmaster.salome@opencascade.com], [salome])
 AC_CONFIG_AUX_DIR(salome_adm/unix/config_files)
 AC_CANONICAL_HOST
 AC_CANONICAL_TARGET
 AM_INIT_AUTOMAKE
 
-PACKAGE=salome
-AC_SUBST(PACKAGE)
-
-VERSION=4.0.0
-XVERSION=0x040000
-AC_SUBST(VERSION)
+XVERSION=`echo $VERSION | awk -F. '{printf("0x%02x%02x%02x",$1,$2,$3)}'`
 AC_SUBST(XVERSION)
 
 # set up MODULE_NAME variable for dynamic construction of directories (resources, etc.)

src/BasicGUI/BasicGUI_ArcDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_ArcDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BasicGUI/BasicGUI_CircleDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_CircleDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 
 #include <GeometryGUI.h>
 #include <GEOMBase.h>

src/BasicGUI/BasicGUI_CurveDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BasicGUI_CurveDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BasicGUI/BasicGUI_EllipseDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BasicGUI_EllipseDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 
 #include <GeometryGUI.h>
 #include <GEOMBase.h>

src/BasicGUI/BasicGUI_LineDlg.cxx

@@ -25,9 +25,9 @@
 
 #include "BasicGUI_LineDlg.h"
 
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
-#include <GEOM_DlgRef.h>
 
 #include <SUIT_ResourceMgr.h>
 #include <SUIT_Session.h>

src/BasicGUI/BasicGUI_MarkerDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_MarkerDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BasicGUI/BasicGUI_PlaneDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_PlaneDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 
 #include <GeometryGUI.h>
 #include <GEOMBase.h>

src/BasicGUI/BasicGUI_PointDlg.cxx

@@ -33,7 +33,7 @@
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 
 #include <GEOMImpl_Types.hxx>
 

src/BasicGUI/BasicGUI_VectorDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_VectorDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BasicGUI/BasicGUI_WorkingPlaneDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BasicGUI_WorkingPlaneDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BlocksGUI/BlocksGUI_BlockDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BlocksGUI_BlockDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BlocksGUI/BlocksGUI_ExplodeDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BlocksGUI_ExplodeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BlocksGUI/BlocksGUI_PropagateDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "BlocksGUI_PropagateDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 #include <GEOMImpl_Types.hxx>

src/BlocksGUI/BlocksGUI_QuadFaceDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BlocksGUI_QuadFaceDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 #include <GEOMImpl_Types.hxx>

src/BlocksGUI/BlocksGUI_TrsfDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "BlocksGUI_TrsfDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BooleanGUI/BooleanGUI_Dialog.cxx

@@ -26,7 +26,7 @@
 #include "BooleanGUI.h"
 #include "BooleanGUI_Dialog.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/BuildGUI/BuildGUI.cxx

@@ -19,18 +19,14 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BooleanGUI.cxx
-//  Author : Damien COQUERET
-//  Module : GEOM
-//  $Header$
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI.h"
 
-#include "SUIT_Desktop.h"
-
-#include "SalomeApp_Application.h"
+#include <SUIT_Desktop.h>
+#include <SalomeApp_Application.h>
 
 #include "BuildGUI_EdgeDlg.h"       // Method EDGE
 #include "BuildGUI_WireDlg.h"       // Method WIRE
@@ -39,7 +35,7 @@
 #include "BuildGUI_SolidDlg.h"      // Method SOLID
 #include "BuildGUI_CompoundDlg.h"   // Method COMPOUND
 
-#include "GeometryGUI.h"
+#include <GeometryGUI.h>
 
 //=======================================================================
 // function : BuildGUI()
@@ -67,24 +63,25 @@ bool BuildGUI::OnGUIEvent( int theCommandID, SUIT_Desktop* parent )
 {
   getGeometryGUI()->EmitSignalDeactivateDialog();
 
-  QDialog* aDlg = NULL;
-
-  switch ( theCommandID )
-  {
-    case 4081: aDlg = new BuildGUI_EdgeDlg    ( getGeometryGUI(), parent, "" ); break;
-    case 4082: aDlg = new BuildGUI_WireDlg    ( getGeometryGUI(), parent, "" ); break;
-    case 4083: aDlg = new BuildGUI_FaceDlg    ( getGeometryGUI(), parent, "" ); break;
-    case 4084: aDlg = new BuildGUI_ShellDlg   ( getGeometryGUI(), parent, "" ); break;
-    case 4085: aDlg = new BuildGUI_SolidDlg   ( getGeometryGUI(), parent, "" ); break;
-    case 4086: aDlg = new BuildGUI_CompoundDlg( getGeometryGUI(), parent, "" ); break;
+  QDialog* aDlg = 0;
 
+  switch ( theCommandID ) {
+  case 4081: aDlg = new BuildGUI_EdgeDlg    ( getGeometryGUI(), parent ); break;
+  case 4082: aDlg = new BuildGUI_WireDlg    ( getGeometryGUI(), parent ); break;
+  case 4083: aDlg = new BuildGUI_FaceDlg    ( getGeometryGUI(), parent ); break;
+  case 4084: aDlg = new BuildGUI_ShellDlg   ( getGeometryGUI(), parent ); break;
+  case 4085: aDlg = new BuildGUI_SolidDlg   ( getGeometryGUI(), parent ); break;
+  case 4086: aDlg = new BuildGUI_CompoundDlg( getGeometryGUI(), parent ); break;
   default: 
     getGeometryGUI()->getApp()->putInfo( tr( "GEOM_PRP_COMMAND" ).arg( theCommandID ) ); 
     break;
   }
   
-  if ( aDlg != NULL )
+  if ( aDlg ) {
+    aDlg->updateGeometry();
+    aDlg->resize( aDlg->minimumSize() );
     aDlg->show();
+  }
 
   return true;
 }
@@ -94,7 +91,9 @@ bool BuildGUI::OnGUIEvent( int theCommandID, SUIT_Desktop* parent )
 //=====================================================================================
 extern "C"
 {
- GEOM_BUILDGUI_EXPORT
+#ifdef WIN32
+  __declspec( dllexport )
+#endif
   GEOMGUI* GetLibGUI( GeometryGUI* parent )
   {
     return new BuildGUI( parent );

src/BuildGUI/BuildGUI.h

@@ -19,30 +19,26 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI.h
-//  Author : Damien COQUERET
-//  Module : GEOM
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
 #ifndef BUILDGUI_H
 #define BUILDGUI_H
 
-#include "GEOM_BuildGUI.hxx"
-
-#include "GEOMGUI.h"
+#include <GEOMGUI.h>
 
 //=================================================================================
 // class    : BuildGUI
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI : public GEOMGUI
+class BuildGUI : public GEOMGUI
 {
 public :
-  BuildGUI( GeometryGUI* parent );
+  BuildGUI( GeometryGUI* );
   ~BuildGUI();
 
-  bool OnGUIEvent( int theCommandID, SUIT_Desktop* parent );
+  bool OnGUIEvent( int, SUIT_Desktop* );
 };
 
-#endif
+#endif // BUILDGUI_H

src/BuildGUI/BuildGUI_CompoundDlg.cxx

@@ -19,23 +19,22 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_CompoundDlg.cxx
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
-//  $Header$
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_CompoundDlg.h"
-#include "GEOMImpl_Types.hxx"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <GEOMImpl_Types.hxx>
+
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
 
 //=================================================================================
 // class    : BuildGUI_CompoundDlg()
@@ -44,9 +43,8 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_CompoundDlg::BuildGUI_CompoundDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                           const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_CompoundDlg::BuildGUI_CompoundDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_COMPOUND" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -54,24 +52,23 @@ BuildGUI_CompoundDlg::BuildGUI_CompoundDlg(GeometryGUI* theGeometryGUI, QWidget*
   setWindowTitle( tr( "GEOM_COMPOUND_TITLE" ) );
 
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_COMPOUND"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_COMPOUND" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupShapes = new Ui::DlgRef_1Sel_QTD();
-  QWidget* aGroupShapesWidget = new QWidget(this);
-  GroupShapes->setupUi(aGroupShapesWidget);
-  aGroupShapesWidget->setObjectName("GroupShapes");
+  GroupShapes = new DlgRef_1Sel( centralWidget() );
 
   GroupShapes->GroupBox1->setTitle( tr( "GEOM_ARGUMENTS" ) );
   GroupShapes->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
   GroupShapes->PushButton1->setIcon( image1 );
   GroupShapes->LineEdit1->setReadOnly( true );
 
-  gridLayout1->addWidget(aGroupShapesWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupShapes );
   /***************************************************************/
 
   setHelpFileName( "compound.htm" );
@@ -104,15 +101,15 @@ void BuildGUI_CompoundDlg::Init()
   myOkShapes = false;
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
   connect( GroupShapes->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
   connect( ( (SalomeApp_Application*)(SUIT_Session::session()->activeApplication() ) )->selectionMgr(), 
 	   SIGNAL(currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
   globalSelection( GEOM_ALLSHAPES );
 
-  initName( tr( "GEOM_COMPOUND" ).toLatin1().constData() );
+  initName( tr( "GEOM_COMPOUND" ) );
 }
 
 
@@ -199,7 +196,7 @@ void BuildGUI_CompoundDlg::ActivateThisDialog()
 //=================================================================================
 void BuildGUI_CompoundDlg::enterEvent(QEvent* e)
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog(); 
 }
 

src/BuildGUI/BuildGUI_CompoundDlg.h

@@ -19,47 +19,44 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
+// File   : BuildGUI_CompoundDlg.h
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
 //
-//
-//  File   : GEOMBase_CompoundDlg.h
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
 
-#ifndef DIALOGBOX_COMPOUND_H
-#define DIALOGBOX_COMPOUND_H
+#ifndef BUILDGUI_COMPOUNDDLG_H
+#define BUILDGUI_COMPOUNDDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_1Sel_QTD.h"
+class DlgRef_1Sel;
 
 //=================================================================================
 // class    : BuildGUI_CompoundDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_CompoundDlg : public GEOMBase_Skeleton
+class BuildGUI_CompoundDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_CompoundDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-			 const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_CompoundDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_CompoundDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );
 
 private:
   void                               Init();
-    void enterEvent(QEvent* e);
+  void                               enterEvent( QEvent* );
   
+private:
   GEOM::ListOfGO                     myShapes;
   bool                               myOkShapes;
   
-    Ui::DlgRef_1Sel_QTD* GroupShapes;
+  DlgRef_1Sel*                       GroupShapes;
     
 private slots:
   void                               ClickOnOk();
@@ -69,4 +66,4 @@ private slots:
   void                               SetEditCurrentArgument();
 };
 
-#endif // DIALOGBOX_COMPOUND_H
+#endif // BUILDGUI_COMPOUNDDLG_H

src/BuildGUI/BuildGUI_EdgeDlg.cxx

@@ -19,24 +19,22 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_EdgeDlg.cxx
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
-//  $Header$
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_EdgeDlg.h"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-#include "GEOMImpl_Types.hxx"
+#include <GEOMImpl_Types.hxx>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
 
 //=================================================================================
 // class    : BuildGUI_EdgeDlg()
@@ -45,9 +43,8 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_EdgeDlg::BuildGUI_EdgeDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                   const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_EdgeDlg::BuildGUI_EdgeDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_EDGE" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -55,28 +52,27 @@ BuildGUI_EdgeDlg::BuildGUI_EdgeDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
   setWindowTitle( tr( "GEOM_EDGE_TITLE" ) );
 
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_EDGE"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_EDGE" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupPoints = new Ui::DlgRef_2Sel_QTD();
-  QWidget* aGroupPointsWidget = new QWidget(this);
-  GroupPoints->setupUi(aGroupPointsWidget);
-  aGroupPointsWidget->setObjectName("GroupPoints");
+  GroupPoints = new DlgRef_2Sel( centralWidget() );
 
   GroupPoints->GroupBox1->setTitle( tr( "GEOM_POINTS" ) );
-  GroupPoints->TextLabel1->setText(tr("GEOM_POINT_I").arg("1"));
-  GroupPoints->TextLabel2->setText(tr("GEOM_POINT_I").arg("2"));
+  GroupPoints->TextLabel1->setText( tr( "GEOM_POINT_I" ).arg( 1 ) );
+  GroupPoints->TextLabel2->setText( tr( "GEOM_POINT_I" ).arg( 2 ) );
   GroupPoints->PushButton1->setIcon( image1 );
   GroupPoints->PushButton2->setIcon( image1 );
   
   GroupPoints->LineEdit1->setReadOnly( true );
   GroupPoints->LineEdit2->setReadOnly( true );
 
-  gridLayout1->addWidget(aGroupPointsWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupPoints );
   /***************************************************************/
 
   setHelpFileName( "edge.htm" );
@@ -112,8 +108,8 @@ void BuildGUI_EdgeDlg::Init()
   globalSelection( GEOM_POINT );
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
 
   connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
   connect( GroupPoints->PushButton2, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
@@ -124,7 +120,7 @@ void BuildGUI_EdgeDlg::Init()
   connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
 	   SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
-  initName( tr( "GEOM_EDGE").toLatin1().constData() );
+  initName( tr( "GEOM_EDGE" ) );
 }
 
 
@@ -199,8 +195,7 @@ void BuildGUI_EdgeDlg::SelectionIntoArgument()
 void BuildGUI_EdgeDlg::LineEditReturnPressed()
 {
   QLineEdit* send = (QLineEdit*)sender();
-  if(send == GroupPoints->LineEdit1 || send == GroupPoints->LineEdit2)
-    {
+  if ( send == GroupPoints->LineEdit1 || send == GroupPoints->LineEdit2 ) {
     myEditCurrentArgument = send;
     GEOMBase_Skeleton::LineEditReturnPressed();
   }
@@ -249,9 +244,9 @@ void BuildGUI_EdgeDlg::ActivateThisDialog()
 // function : enterEvent()
 // purpose  :
 //=================================================================================
-void BuildGUI_EdgeDlg::enterEvent(QEvent* e)
+void BuildGUI_EdgeDlg::enterEvent( QEvent* )
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog();
 }
 

src/BuildGUI/BuildGUI_EdgeDlg.h

@@ -19,48 +19,45 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_EdgeDlg.h
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
-#ifndef DIALOGBOX_EDGE_H
-#define DIALOGBOX_EDGE_H
+#ifndef BUILDGUI_EDGEDLG_H
+#define BUILDGUI_EDGEDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_2Sel_QTD.h"
+class DlgRef_2Sel;
 
 //=================================================================================
 // class    : BuildGUI_EdgeDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_EdgeDlg : public GEOMBase_Skeleton
+class BuildGUI_EdgeDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_EdgeDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-		     const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_EdgeDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_EdgeDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );    
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );    
 
 private:
   void                               Init();
-    void enterEvent(QEvent* e);
+  void                               enterEvent( QEvent* );
   
+private:
   GEOM::GEOM_Object_var              myPoint1, myPoint2;   /* Points containing the edge */ 
   bool                               myOkPoint1;   /* true when myPoint is defined */    
   bool                               myOkPoint2;
   
-    Ui::DlgRef_2Sel_QTD* GroupPoints;
+  DlgRef_2Sel*                       GroupPoints;
 
 private slots:
   void                               ClickOnOk();
@@ -71,4 +68,4 @@ private slots:
   void                               SetEditCurrentArgument();
 };
 
-#endif // DIALOGBOX_EDGE_H
+#endif // BUILDGUI_EDGEDLG_H

src/BuildGUI/BuildGUI_FaceDlg.cxx

@@ -19,26 +19,23 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_FaceDlg.cxx
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
-//  $Header$
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_FaceDlg.h"
-#include "GEOMImpl_Types.hxx"
-#include "TColStd_MapOfInteger.hxx"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <GEOMImpl_Types.hxx>
+#include <TColStd_MapOfInteger.hxx>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-using namespace std;
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
 
 //=================================================================================
 // class    : BuildGUI_FaceDlg()
@@ -47,9 +44,8 @@ using namespace std;
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_FaceDlg::BuildGUI_FaceDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                   const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_FaceDlg::BuildGUI_FaceDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_FACE" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -57,24 +53,23 @@ BuildGUI_FaceDlg::BuildGUI_FaceDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
   setWindowTitle( tr( "GEOM_FACE_TITLE" ) );
 
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_FACE"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_FACE" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupWire = new Ui::DlgRef_1Sel1Check_QTD();
-  QWidget* aGroupWireWidget = new QWidget(this);
-  GroupWire->setupUi(aGroupWireWidget);
-  aGroupWireWidget->setObjectName("GroupWire");
+  GroupWire = new DlgRef_1Sel1Check( centralWidget() );
 
   GroupWire->GroupBox1->setTitle( tr( "GEOM_FACE_FFW" ) );
   GroupWire->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
   GroupWire->CheckButton1->setText( tr( "GEOM_FACE_OPT" ) );
   GroupWire->PushButton1->setIcon( image1 );
 
-  gridLayout1->addWidget(aGroupWireWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupWire );
   /***************************************************************/
 
   setHelpFileName( "face.htm" );
@@ -104,7 +99,7 @@ void BuildGUI_FaceDlg::Init()
   myEditCurrentArgument = GroupWire->LineEdit1;
   GroupWire->LineEdit1->setReadOnly( true );
 
-  GroupWire->CheckButton1->setChecked(TRUE);
+  GroupWire->CheckButton1->setChecked( true );
 
   TColStd_MapOfInteger aMap;
   aMap.Add( GEOM_EDGE );
@@ -112,14 +107,14 @@ void BuildGUI_FaceDlg::Init()
   globalSelection( aMap );
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
   connect( GroupWire->LineEdit1,   SIGNAL( returnPressed()), this, SLOT( LineEditReturnPressed() ) );
   connect( GroupWire->PushButton1, SIGNAL( clicked() ),      this, SLOT( SetEditCurrentArgument() ) );
   connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
 	   SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
-  initName(tr("GEOM_FACE").toLatin1().constData());
+  initName( tr( "GEOM_FACE" ) );
 }
 
 
@@ -159,8 +154,7 @@ void BuildGUI_FaceDlg::SelectionIntoArgument()
   
   int aNbSel = GEOMBase::GetNameOfSelectedIObjects( selectedIO(), aName );
   
-  if(aNbSel < 1)
-    {
+  if ( aNbSel < 1) {
     myWires.length(0);
     return;
   }
@@ -172,8 +166,6 @@ void BuildGUI_FaceDlg::SelectionIntoArgument()
     aName = tr( "%1_objects" ).arg( aNbSel );
   
   myEditCurrentArgument->setText( aName );
-  
-  myEditCurrentArgument->setText( aName );
 }
 
 
@@ -219,9 +211,9 @@ void BuildGUI_FaceDlg::ActivateThisDialog()
 // function : enterEvent()
 // purpose  :
 //=================================================================================
-void BuildGUI_FaceDlg::enterEvent(QEvent* e)
+void BuildGUI_FaceDlg::enterEvent( QEvent* )
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog(); 
 }
 

src/BuildGUI/BuildGUI_FaceDlg.h

@@ -19,46 +19,43 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_FaceDlg.h
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
-#ifndef DIALOGBOX_FACE_H
-#define DIALOGBOX_FACE_H
+#ifndef BUILDGUI_FACEDLG_H
+#define BUILDGUI_FACEDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_1Sel1Check_QTD.h"
+class DlgRef_1Sel1Check;
 
 //=================================================================================
 // class    : BuildGUI_FaceDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_FaceDlg : public GEOMBase_Skeleton
+class BuildGUI_FaceDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_FaceDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-		     const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_FaceDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_FaceDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );    
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );    
   
 private:
   void                               Init();
-    void enterEvent(QEvent* e);
+  void                               enterEvent( QEvent* );
   
+private:
   GEOM::ListOfGO                     myWires;
   
-    Ui::DlgRef_1Sel1Check_QTD* GroupWire;
+  DlgRef_1Sel1Check*                 GroupWire;
 
 private slots:
   void                               ClickOnOk();
@@ -68,4 +65,4 @@ private slots:
   void                               SetEditCurrentArgument();
 };
 
-#endif // DIALOGBOX_FACE_H
+#endif // BUILDGUI_FACEDLG_H

src/BuildGUI/BuildGUI_ShellDlg.cxx

@@ -19,25 +19,24 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_ShellDlg.cxx
-//  Author : Damien COQUERET
-//  Module : GEOM
-//  $Header$
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_ShellDlg.h"
-#include "GEOMImpl_Types.hxx"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <GEOMImpl_Types.hxx>
 
-#include "TColStd_MapOfInteger.hxx"
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+
+#include <TColStd_MapOfInteger.hxx>
 
 //=================================================================================
 // class    : BuildGUI_ShellDlg()
@@ -46,9 +45,8 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_ShellDlg::BuildGUI_ShellDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                     const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_ShellDlg::BuildGUI_ShellDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_SHELL" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -56,24 +54,23 @@ BuildGUI_ShellDlg::BuildGUI_ShellDlg(GeometryGUI* theGeometryGUI, QWidget* paren
   setWindowTitle( tr( "GEOM_SHELL_TITLE" ) );
     
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_SHELL"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_SHELL" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupShell = new Ui::DlgRef_1Sel_QTD();
-  QWidget* aGroupShellWidget = new QWidget(this);
-  GroupShell->setupUi(aGroupShellWidget);
-  aGroupShellWidget->setObjectName("GroupShell");
+  GroupShell = new DlgRef_1Sel( centralWidget() );
 
   GroupShell->GroupBox1->setTitle( tr( "GEOM_ARGUMENTS" ) );
   GroupShell->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
   GroupShell->PushButton1->setIcon( image1 );
   GroupShell->LineEdit1->setReadOnly( true );
   
-  gridLayout1->addWidget(aGroupShellWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupShell );
   /***************************************************************/
 
   setHelpFileName("shell.htm");
@@ -111,15 +108,15 @@ void BuildGUI_ShellDlg::Init()
   globalSelection( aMap );
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
 
   connect( GroupShell->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
 
   connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
 	   SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
-  initName(tr("GEOM_SHELL").toLatin1().constData());
+  initName( tr( "GEOM_SHELL" ) );
 }
 
 
@@ -214,9 +211,9 @@ void BuildGUI_ShellDlg::ActivateThisDialog()
 // function : enterEvent()
 // purpose  :
 //=================================================================================
-void BuildGUI_ShellDlg::enterEvent(QEvent* e)
+void BuildGUI_ShellDlg::enterEvent( QEvent* )
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog();
 }
 

src/BuildGUI/BuildGUI_ShellDlg.h

@@ -20,46 +20,44 @@
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
 //
-//
 // File   : BuildGUI_ShellDlg.h
-//  Author : Damien COQUERET
-//  Module : GEOM
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
-#ifndef DIALOGBOX_SHELL_H
-#define DIALOGBOX_SHELL_H
+#ifndef BUILDGUI_SHELLDLG_H
+#define BUILDGUI_SHELLDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_1Sel_QTD.h"
+class DlgRef_1Sel;
 
 //=================================================================================
 // class    : BuildGUI_ShellDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_ShellDlg : public GEOMBase_Skeleton
+class BuildGUI_ShellDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_ShellDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-		      const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_ShellDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_ShellDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );    
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );    
 
 private:
   void                               Init();
-    void enterEvent(QEvent * e);
+  void                               enterEvent( QEvent* );
 
+private:
   GEOM::ListOfGO                     myFacesAndShells;
   bool                               myOkFacesAndShells;/* to check when arguments is defined */
   
-    Ui::DlgRef_1Sel_QTD* GroupShell;
+  DlgRef_1Sel*                       GroupShell;
 
 private slots:
   void                               ClickOnOk();
@@ -69,4 +67,4 @@ private slots:
   void                               ActivateThisDialog();
 };
 
-#endif // DIALOGBOX_SHELL_H
+#endif // BUILDGUI_SHELLDLG_H

src/BuildGUI/BuildGUI_SolidDlg.cxx

@@ -19,23 +19,22 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_SolidDlg.cxx
-//  Author : Damien COQUERET
-//  Module : GEOM
-//  $Header$
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_SolidDlg.h"
-#include "GEOMImpl_Types.hxx"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <GEOMImpl_Types.hxx>
+
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
 
 //=================================================================================
 // class    : BuildGUI_SolidDlg()
@@ -44,9 +43,8 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_SolidDlg::BuildGUI_SolidDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                     const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_SolidDlg::BuildGUI_SolidDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_SOLID" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -54,17 +52,14 @@ BuildGUI_SolidDlg::BuildGUI_SolidDlg(GeometryGUI* theGeometryGUI, QWidget* paren
   setWindowTitle( tr( "GEOM_SOLID_TITLE" ) );
     
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_SOLID"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_SOLID" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupSolid = new Ui::DlgRef_1Sel1Check_QTD();
-  QWidget* aGroupSolidWidget = new QWidget(this);
-  GroupSolid->setupUi(aGroupSolidWidget);
-  aGroupSolidWidget->setObjectName("GroupSolid");
+  GroupSolid = new DlgRef_1Sel1Check( centralWidget() );
 
   GroupSolid->GroupBox1->setTitle( tr( "GEOM_ARGUMENTS" ) );
   GroupSolid->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
@@ -72,7 +67,9 @@ BuildGUI_SolidDlg::BuildGUI_SolidDlg(GeometryGUI* theGeometryGUI, QWidget* paren
   GroupSolid->PushButton1->setIcon( image1 );
   GroupSolid->LineEdit1->setReadOnly( true );
   
-  gridLayout1->addWidget(aGroupSolidWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupSolid );
   /***************************************************************/
 
   setHelpFileName( "solid.htm" );
@@ -108,8 +105,8 @@ void BuildGUI_SolidDlg::Init()
   globalSelection( GEOM_SHELL );
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
 
   connect( GroupSolid->PushButton1,  SIGNAL( clicked() ),       this, SLOT( SetEditCurrentArgument() ) );
   connect( GroupSolid->CheckButton1, SIGNAL( toggled( bool ) ), this, SLOT( EnableNameField( bool ) ) );
@@ -117,7 +114,7 @@ void BuildGUI_SolidDlg::Init()
   connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
 	   SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
 
-  initName(tr("GEOM_SOLID").toLatin1().constData());
+  initName( tr( "GEOM_SOLID" ) );
 }
 
 
@@ -204,9 +201,9 @@ void BuildGUI_SolidDlg::ActivateThisDialog()
 // function : enterEvent()
 // purpose  :
 //=================================================================================
-void BuildGUI_SolidDlg::enterEvent(QEvent* e)
+void BuildGUI_SolidDlg::enterEvent( QEvent* )
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog();
 }
 
@@ -217,7 +214,7 @@ void BuildGUI_SolidDlg::enterEvent(QEvent* e)
 //=================================================================================
 void  BuildGUI_SolidDlg::EnableNameField( bool toEnable )
 {
-  this->GroupBoxName->setEnabled(toEnable); 
+  mainFrame()->GroupBoxName->setEnabled( toEnable ); 
 }
 
 //=================================================================================
@@ -246,18 +243,15 @@ bool BuildGUI_SolidDlg::execute( ObjectList& objects )
 {
   bool toCreateSingleSolid = GroupSolid->CheckButton1->isChecked();
   
-  if ( toCreateSingleSolid )
-  {
+  if ( toCreateSingleSolid ) {
     GEOM::GEOM_Object_var anObj = GEOM::GEOM_IShapesOperations::_narrow(
       getOperation() )->MakeSolidShells( myShells );
 
     if ( !anObj->_is_nil() )
       objects.push_back( anObj._retn() );
   }
-  else
-  {
-    for ( int i = 0, n = myShells.length(); i< n; i++ )
-    {
+  else {
+    for ( int i = 0, n = myShells.length(); i< n; i++ ) {
       GEOM::GEOM_Object_var anObj = GEOM::GEOM_IShapesOperations::_narrow(
         getOperation() )->MakeSolidShell( myShells[ i ] );
 

src/BuildGUI/BuildGUI_SolidDlg.h

@@ -19,48 +19,45 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_SolidDlg.h
-//  Author : Damien COQUERET
-//  Module : GEOM
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+//
 
-#ifndef DIALOGBOX_SOLID_H
-#define DIALOGBOX_SOLID_H
+#ifndef BUILDGUI_SOLIDDLG_H
+#define BUILDGUI_SOLIDDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_1Sel1Check_QTD.h"
+class DlgRef_1Sel1Check;
 
 //=================================================================================
 // class    : BuildGUI_SolidDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_SolidDlg : public GEOMBase_Skeleton
+class BuildGUI_SolidDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_SolidDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-		      const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_SolidDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_SolidDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );    
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );    
 
 private:
   void                               Init();
-    void enterEvent(QEvent * e);
+  void                               enterEvent( QEvent* );
 
+private:
   GEOM::ListOfGO                     myShells;
   bool                               myOkShells; /* to check when arguments is defined and
 						    all shells are closed */
 
-    Ui::DlgRef_1Sel1Check_QTD* GroupSolid;
+  DlgRef_1Sel1Check*                GroupSolid;
 
 private slots:
   void                               ClickOnOk();
@@ -68,7 +65,7 @@ private slots:
   void                               SetEditCurrentArgument();
   void                               SelectionIntoArgument();
   void                               ActivateThisDialog();
-    void EnableNameField(bool toEnable);
+  void                               EnableNameField( bool );
 };
 
-#endif // DIALOGBOX_SOLID_H
+#endif // BUILDGUI_SOLIDDLG_H

src/BuildGUI/BuildGUI_WireDlg.cxx

@@ -19,25 +19,24 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_WireDlg.cxx
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
-//  $Header$
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
 #include "BuildGUI_WireDlg.h"
-#include "GEOMImpl_Types.hxx"
 
-#include "GeometryGUI.h"
-#include "GEOMBase.h"
+#include <GEOMImpl_Types.hxx>
 
-#include "SUIT_ResourceMgr.h"
-#include "SUIT_Session.h"
-#include "SalomeApp_Application.h"
-#include "LightApp_SelectionMgr.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
 
-#include "TColStd_MapOfInteger.hxx"
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+
+#include <TColStd_MapOfInteger.hxx>
 
 //=================================================================================
 // class    : BuildGUI_WireDlg()
@@ -46,9 +45,8 @@
 //            The dialog will by default be modeless, unless you set 'modal' to
 //            TRUE to construct a modal dialog.
 //=================================================================================
-BuildGUI_WireDlg::BuildGUI_WireDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
-                                   const char* name, bool modal, Qt::WindowFlags fl)
-  :GEOMBase_Skeleton(theGeometryGUI, parent, name, modal, Qt::WindowTitleHint | Qt::WindowSystemMenuHint)
+BuildGUI_WireDlg::BuildGUI_WireDlg( GeometryGUI* theGeometryGUI, QWidget* parent )
+  : GEOMBase_Skeleton( theGeometryGUI, parent )
 {
   QPixmap image0( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_DLG_BUILD_WIRE" ) ) );
   QPixmap image1( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
@@ -56,24 +54,23 @@ BuildGUI_WireDlg::BuildGUI_WireDlg(GeometryGUI* theGeometryGUI, QWidget* parent,
   setWindowTitle( tr( "GEOM_WIRE_TITLE" ) );
 
   /***************************************************************/
-  GroupConstructors->setTitle(tr("GEOM_WIRE"));
-  RadioButton1->setIcon(image0);
-  RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton2->close();
-  RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
-  RadioButton3->close();
+  mainFrame()->GroupConstructors->setTitle( tr( "GEOM_WIRE" ) );
+  mainFrame()->RadioButton1->setIcon( image0 );
+  mainFrame()->RadioButton2->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton2->close();
+  mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+  mainFrame()->RadioButton3->close();
 
-  GroupPoints = new Ui::DlgRef_1Sel_QTD();
-  QWidget* aGroupPointsWidget = new QWidget(this);
-  GroupPoints->setupUi(aGroupPointsWidget);
-  aGroupPointsWidget->setObjectName("GroupPoints");
+  GroupPoints = new DlgRef_1Sel( centralWidget() );
 
   GroupPoints->GroupBox1->setTitle( tr( "GEOM_WIRE_CONNECT" ) );
   GroupPoints->TextLabel1->setText( tr( "GEOM_OBJECTS" ) );
   GroupPoints->PushButton1->setIcon( image1 );
   GroupPoints->LineEdit1->setReadOnly( true );
 
-  gridLayout1->addWidget(aGroupPointsWidget, 2, 0);
+  QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+  layout->setMargin( 0 ); layout->setSpacing( 6 );
+  layout->addWidget( GroupPoints );
   /***************************************************************/
 
   setHelpFileName( "wire.htm" );
@@ -111,13 +108,13 @@ void BuildGUI_WireDlg::Init()
   globalSelection( aMap );
 
   /* signals and slots connections */
-  connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
-  connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
+  connect( buttonOk(),    SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+  connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
   connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
   connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
 	   SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
   
-  initName(tr("GEOM_WIRE").toLatin1().constData());
+  initName( tr( "GEOM_WIRE" ) );
 }
 
 
@@ -213,9 +210,9 @@ void BuildGUI_WireDlg::ActivateThisDialog()
 // function : enterEvent()
 // purpose  :
 //=================================================================================
-void BuildGUI_WireDlg::enterEvent(QEvent* e)
+void BuildGUI_WireDlg::enterEvent( QEvent* )
 {
-  if ( !GroupConstructors->isEnabled() )
+  if ( !mainFrame()->GroupConstructors->isEnabled() )
     ActivateThisDialog();
 }
 

src/BuildGUI/BuildGUI_WireDlg.h

@@ -19,47 +19,44 @@
 // 
 // See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 //
-//
-//
 // File   : BuildGUI_WireDlg.h
-//  Author : Lucien PIGNOLONI
-//  Module : GEOM
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
+//
 
-#ifndef DIALOGBOX_WIRE_H
-#define DIALOGBOX_WIRE_H
+#ifndef BUILDGUI_WIREDLG_H
+#define BUILDGUI_WIREDLG_H
 
-#include "GEOM_BuildGUI.hxx"
+#include <GEOMBase_Skeleton.h>
 
-#include "GEOMBase_Skeleton.h"
-#include "DlgRef_1Sel_QTD.h"
+class DlgRef_1Sel;
 
 //=================================================================================
 // class    : BuildGUI_WireDlg
 // purpose  :
 //=================================================================================
-class GEOM_BUILDGUI_EXPORT BuildGUI_WireDlg : public GEOMBase_Skeleton
+class BuildGUI_WireDlg : public GEOMBase_Skeleton
 { 
   Q_OBJECT
 
 public:
-    BuildGUI_WireDlg(GeometryGUI* theGeometryGUI, QWidget* parent = 0,
-		     const char* name = 0, bool modal = FALSE, Qt::WindowFlags fl = 0);
+  BuildGUI_WireDlg( GeometryGUI*, QWidget* = 0 );
   ~BuildGUI_WireDlg();
 
 protected:
   // redefined from GEOMBase_Helper
   virtual GEOM::GEOM_IOperations_ptr createOperation();
-    virtual bool isValid( QString& msg );
-    virtual bool execute( ObjectList& objects );    
+  virtual bool                       isValid( QString& );
+  virtual bool                       execute( ObjectList& );    
 
 private:
   void                               Init();
-    void enterEvent(QEvent* e);
+  void                               enterEvent( QEvent* );
 
+private:
   GEOM::ListOfGO                     myEdgesAndWires;
   bool                               myOkEdgesAndWires;   /* to check when arguments is defined */
   
-    Ui::DlgRef_1Sel_QTD* GroupPoints;
+  DlgRef_1Sel*                       GroupPoints;
 
 private slots:
   void                               ClickOnOk();
@@ -69,4 +66,4 @@ private slots:
   void                               SetEditCurrentArgument();
 };
 
-#endif // DIALOGBOX_WIRE_H
+#endif // BUILDGUI_WIREDLG_H

src/BuildGUI/GEOM_BuildGUI.hxx

@@ -1,47 +0,0 @@
-//  Copyright (C) 2003  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-//  CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS 
-// 
-//  This library is free software; you can redistribute it and/or 
-//  modify it under the terms of the GNU Lesser General Public 
-//  License as published by the Free Software Foundation; either 
-//  version 2.1 of the License. 
-// 
-//  This library is distributed in the hope that it will be useful, 
-//  but WITHOUT ANY WARRANTY; without even the implied warranty of 
-//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU 
-//  Lesser General Public License for more details. 
-// 
-//  You should have received a copy of the GNU Lesser General Public 
-//  License along with this library; if not, write to the Free Software 
-//  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA 
-// 
-//  See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org 
-//
-//
-//
-//  File   : GEOM_BuildGUI.hxx
-//  Author : Alexander A. BORODIN
-//  Module : GEOM
-
-#ifndef _GEOM_BuildGUI_HXX_
-#define _GEOM_BuildGUI_HXX_
-
-#ifdef WNT
- #if defined BUILDGUI_EXPORTS
-  #if defined WIN32
-   #define GEOM_BUILDGUI_EXPORT __declspec( dllexport )
-  #else
-   #define GEOM_BUILDGUI_EXPORT
-  #endif
- #else
-  #if defined WIN32
-   #define GEOM_BUILDGUI_EXPORT __declspec( dllimport )
-  #else
-   #define GEOM_BUILDGUI_EXPORT
-  #endif
- #endif
-#else
- #define GEOM_BUILDGUI_EXPORT
-#endif
-
-#endif

src/BuildGUI/Makefile.am

@@ -19,13 +19,10 @@
 # 
 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 #
+# File    : Makefile.am
+# Author  : Alexander BORODIN, Open CASCADE S.A.S. (alexander.borodin@opencascade.com)
+# Package : BuildGUI
 #
-#
-#  File   : Makefile.in
-#  Author : Damien COQUERET (OCC)
-#  Modified by : Alexander BORODIN (OCN) - autotools usage
-#  Module : GEOM
-#  $Header: 
 
 include $(top_srcdir)/adm_local/unix/make_common_starter.am
 
@@ -37,6 +34,14 @@ lib_LTLIBRARIES = libBuildGUI.la
 
 # Sources files
 dist_libBuildGUI_la_SOURCES =	\
+	BuildGUI.h		\
+	BuildGUI_EdgeDlg.h	\
+	BuildGUI_WireDlg.h	\
+	BuildGUI_FaceDlg.h	\
+	BuildGUI_ShellDlg.h	\
+	BuildGUI_SolidDlg.h	\
+	BuildGUI_CompoundDlg.h	\
+				\
 	BuildGUI.cxx		\
 	BuildGUI_EdgeDlg.cxx	\
 	BuildGUI_WireDlg.cxx	\
@@ -80,6 +85,7 @@ libBuildGUI_la_CPPFLAGS = \
 	-I$(srcdir)/../GEOMImpl			\
 	-I$(srcdir)/../GEOMFiltersSelection	\
 	-I$(top_builddir)/idl			\
+	-I$(top_builddir)/src/DlgRef		\
 	-I$(top_builddir)/salome_adm/unix
 
 libBuildGUI_la_LDFLAGS = \

src/DlgRef/DlgRef.cxx

@@ -17,11 +17,11 @@
 // 
 // See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org 
 //
-// File   : GEOM_DlgRef.cxx
+// File   : DlgRef.cxx
 // Author : Vadim SANDLER, Open CASCADE S.A.S. (vadim.sandler@opencascade.com)
 //
 
-#include "GEOM_DlgRef.h"
+#include "DlgRef.h"
 
 //////////////////////////////////////////
 // DlgRef_1List1Spin1Btn

src/DlgRef/DlgRef.h

@@ -17,7 +17,7 @@
 // 
 // See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org 
 //
-// File   : GEOM_DlgRef.h
+// File   : DlgRef.h
 // Author : Vadim SANDLER, Open CASCADE S.A.S. (vadim.sandler@opencascade.com)
 //
 

src/DlgRef/Makefile.am

@@ -31,11 +31,11 @@ lib_LTLIBRARIES = libDlgRef.la
 
 # Sources files
 dist_libDlgRef_la_SOURCES = 	\
-	GEOM_DlgRef.h		\
-	GEOM_DlgRef.cxx
+	DlgRef.h		\
+	DlgRef.cxx
 
 MOC_FILES = \
-	GEOM_DlgRef_moc.cxx
+	DlgRef_moc.cxx
 
 UIC_FILES = \
 	ui_DlgRef_1List1Spin1Btn_QTD.h		\

src/EntityGUI/EntityGUI_SubShapeDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "EntityGUI_SubShapeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/GEOMBase/GEOMBase_Skeleton.cxx

@@ -26,8 +26,8 @@
 #include "GEOMBase_Skeleton.h"
 #include "GEOMBase.h"
 
+#include <DlgRef.h>
 #include <GeometryGUI.h>
-#include <GEOM_DlgRef.h>
 
 #include <SalomeApp_Application.h>
 #include <LightApp_Application.h>

src/GenerationGUI/GenerationGUI_FillingDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "GenerationGUI_FillingDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/GenerationGUI/GenerationGUI_PipeDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "GenerationGUI_PipeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/GenerationGUI/GenerationGUI_PrismDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "GenerationGUI_PrismDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/GenerationGUI/GenerationGUI_RevolDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "GenerationGUI_RevolDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/GroupGUI/GroupGUI_GroupDlg.cxx

@@ -32,7 +32,7 @@
 #include <SalomeApp_Study.h>
 #include <LightApp_SelectionMgr.h>
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GEOMBase.h>
 
 #include <GEOMImpl_Types.hxx>

src/Makefile.am

@@ -17,12 +17,9 @@
 # 
 # See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
 #
-#
-#
 # File    : Makefile.am
-#  Author : Patrick GOLDBRONN (CEA)
-#  Modified by : Alexander BORODIN (OCN) - autotools usage
-#  Module : GEOM
-#  $Header$
+# Author  : Alexander BORODIN, Open CASCADE S.A.S. (alexander.borodin@opencascade.com)
+# Package : src (source files directory)
+#
 
 SUBDIRS = OBJECT ARCHIMEDE NMTDS NMTTools NMTAlgo GEOMAlgo SKETCHER GEOM BREPExport BREPImport IGESExport IGESImport STEPExport STEPImport STLExport ShHealOper GEOMImpl GEOM_I GEOMClient DlgRef GEOMFiltersSelection GEOMGUI GEOMBase GEOMToolsGUI DisplayGUI BasicGUI PrimitiveGUI GenerationGUI EntityGUI BuildGUI BooleanGUI TransformationGUI OperationGUI RepairGUI MeasureGUI GroupGUI BlocksGUI GEOM_I_Superv GEOM_SWIG

src/MeasureGUI/MeasureGUI_CenterMassDlg.cxx

@@ -26,7 +26,7 @@
 #include "MeasureGUI_CenterMassDlg.h"
 #include "MeasureGUI_Widgets.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GEOMBase.h>
 
 #include <SUIT_Session.h>

src/MeasureGUI/MeasureGUI_CheckCompoundOfBlocksDlg.cxx

@@ -36,7 +36,7 @@
 #include <TopExp.hxx>
 #include <TColStd_MapOfInteger.hxx>
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 #include <GEOMImpl_Types.hxx>

src/OperationGUI/OperationGUI_ArchimedeDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "OperationGUI_ArchimedeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/OperationGUI/OperationGUI_ChamferDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "OperationGUI_ChamferDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/OperationGUI/OperationGUI_ClippingDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "OperationGUI_ClippingDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/OperationGUI/OperationGUI_FilletDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "OperationGUI_FilletDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/OperationGUI/OperationGUI_MaterialDlg.cxx

@@ -25,7 +25,7 @@
 #include "OperationGUI_MaterialDlg.h"
 #include "OperationGUI_PartitionDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GEOMBase.h>
 #include <GeometryGUI.h>
 

src/OperationGUI/OperationGUI_PartitionDlg.cxx

@@ -26,7 +26,7 @@
 #include "OperationGUI_PartitionDlg.h"
 #include "OperationGUI_MaterialDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/PrimitiveGUI/PrimitiveGUI_BoxDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "PrimitiveGUI_BoxDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/PrimitiveGUI/PrimitiveGUI_ConeDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "PrimitiveGUI_ConeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/PrimitiveGUI/PrimitiveGUI_CylinderDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "PrimitiveGUI_CylinderDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 
 #include <GeometryGUI.h>
 #include <GEOMBase.h>

src/PrimitiveGUI/PrimitiveGUI_SphereDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "PrimitiveGUI_SphereDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/PrimitiveGUI/PrimitiveGUI_TorusDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "PrimitiveGUI_TorusDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_ChangeOrientationDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_ChangeOrientationDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_CloseContourDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_CloseContourDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_DivideEdgeDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_DivideEdgeDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_GlueDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_GlueDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_RemoveHolesDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_RemoveHolesDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_RemoveIntWiresDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_RemoveIntWiresDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_SewingDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_SewingDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/RepairGUI/RepairGUI_ShapeProcessDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_ShapeProcessDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 #include <GEOMImpl_Types.hxx>

src/RepairGUI/RepairGUI_SuppressFacesDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "RepairGUI_SuppressFacesDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_MirrorDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_MirrorDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_MultiRotationDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_MultiRotationDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_MultiTranslationDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_MultiTranslationDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_OffsetDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_OffsetDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_PositionDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_PositionDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_RotationDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_RotationDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_ScaleDlg.cxx

@@ -24,7 +24,7 @@
 
 #include "TransformationGUI_ScaleDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>
 

src/TransformationGUI/TransformationGUI_TranslationDlg.cxx

@@ -25,7 +25,7 @@
 
 #include "TransformationGUI_TranslationDlg.h"
 
-#include <GEOM_DlgRef.h>
+#include <DlgRef.h>
 #include <GeometryGUI.h>
 #include <GEOMBase.h>