Fix various typos

Found via `codespell -q 3 -S ./external_dependencies/pybind11 -L alledges,allright,ane,anormal,ans,apoints,ba,boxs,cancle,childs,co-ordinate,co-ordinates,daty,enty,filld,hel,identifyable,ist,linz,lod,ned,nd,selt,statics,suround,thev,thist,thisy,timere,upto,wel`
This commit is contained in:
luz paz 2022-03-25 18:21:48 -04:00
parent dc836ae7e4
commit 4033fac1b3
54 changed files with 126 additions and 126 deletions

View File

@ -1,7 +1,7 @@
include (ExternalProject)
option( BUILD_ZLIB "Build and link static version of zlib (usefull for pip binaries)" OFF )
option( BUILD_OCC "Build and link static version of occ (usefull for pip binaries)" OFF )
option( BUILD_ZLIB "Build and link static version of zlib (useful for pip binaries)" OFF )
option( BUILD_OCC "Build and link static version of occ (useful for pip binaries)" OFF )
set_property (DIRECTORY PROPERTY EP_PREFIX dependencies)
set (NETGEN_DEPENDENCIES)

View File

@ -176,7 +176,7 @@ Lines starting with $\#$ are comment lines. Every CSG file must contain the
keyword {\tt algebraic3d} before any non-comment line.
The keyword {\tt solid} defines a named solid, here the solid {\it cube}
is defined. A solid is defined by the Eulerian operations applied to
primitives. Here, the solid is just the primitve defined by {\tt orthobrick}.
primitives. Here, the solid is just the primitive defined by {\tt orthobrick}.
This is a brick parallel to the axis, specified by the minimal $x$, $y$, and
$z$ coordinates, and the maximal $x$, $y$, and $z$ coordinates. The present
definition gives the cube $[0,1]^3$. Finally, the definition {\tt tlo cube}
@ -260,7 +260,7 @@ amount of red, green and blue (RGB) values. The flag {\tt
-transparent} makes the solid appear transparent.
It is possible to specify bounday condition numbers for individual
It is possible to specify boundary condition numbers for individual
surfaces of a solid. The flag {\tt -bc} assigns the bc to all
surfaces of that solid-tree. If several flags are given the one closest
to the leaves of the tree dominates. The following file defines a
@ -536,7 +536,7 @@ STL is a standardized file format to describe (approximate) geometies
by triangulated surfaces. It is useful to describe complicated parts
which are modeled with some CAD programmes. Also, some users have written
their own (C) programmes to define STL geometries, where was not so easy
to use the CSG format. The syntac of STL files is as follos
to use the CSG format. The syntax of STL files is as follows
\begin{quote}
(not available yet. please figure out the syntax from the examples)
\end{quote}
@ -593,10 +593,10 @@ Finally, the refinement factor along the line follows.
\chapter{Mesh and Solution Formats}
You can export meshes to a couple of file formats. Some are self-defined,
some other are standard formats. The self-defined are the followings:
some other are standard formats. The self-defined are the following:
\section{Mesh Size File}
By means of a mesh size file you can provide a local mesh size density. The file extension must be {\it .msz}. If you want to use the mesh size file, you specify it in the ``Meshing Options'', doalog box, page ``Mesh Size''.
By means of a mesh size file you can provide a local mesh size density. The file extension must be {\it .msz}. If you want to use the mesh size file, you specify it in the ``Meshing Options'', dialog box, page ``Mesh Size''.
The syntay is:
\begin{verbatim}
@ -643,7 +643,7 @@ The Fepp 2D format contains the following sections:
\begin{enumerate}
\item
boundary segmetns \\
boundary segments \\
After the number of boundary segments there follows a list of
segments. Each segment is specified by the spline - patch number,
and the two node indices. Counting starts with 1
@ -749,7 +749,7 @@ the bottom, and the large drawing window. The menu items will be explained in
\item Quit \newline
Terminate Netgen
\item Generate mesh \newline
Performe mesh generation
Perform mesh generation
\item Stop Meshing \newline
Stop mesh generation
\item Geometry/Edges/Mesh/Solution \newline

View File

@ -466,7 +466,7 @@ namespace ngcore
// -1 restores a new shared ptr by restoring the inner pointer and creating a shared_ptr to it
if (nr == -1)
{
logger->debug("Createing new shared_ptr");
logger->debug("Creating new shared_ptr");
T* p = nullptr;
bool neededDowncast;
(*this) & neededDowncast & p;

View File

@ -605,7 +605,7 @@ namespace ngcore
}
else
{
// to be cleand up ...
// to be cleaned up ...
Array<char *> strs;
posbrack++;

View File

@ -500,7 +500,7 @@ namespace ngcore
for (int i = 0; i < table[bnr].Size(); i++)
if (table[bnr][i].first == ind)
return i;
throw Exception ("Ask for unsused hash-value");
throw Exception ("Ask for unused hash-value");
}
T & operator[] (T_HASH ahash)

View File

@ -141,7 +141,7 @@ namespace ngcore
NETGEN_INLINE double operator[] (int i) const { return ((double*)(&data))[i]; }
NETGEN_INLINE double & operator[] (int i) { return ((double*)(&data))[i]; }
// [[deprecated("don't write to individual elments of SIMD")]]
// [[deprecated("don't write to individual elements of SIMD")]]
// NETGEN_INLINE double & operator[] (int i) { return ((double*)(&data))[i]; }
template <int I>
double Get() const { return ((double*)(&data))[I]; }

View File

@ -13,7 +13,7 @@ namespace netgen
/*
2D Curve repesentation
2D Curve representation
*/

View File

@ -180,7 +180,7 @@ namespace netgen
pi1 = 0;
copyedge = 0;
// identifyable point available ?
// identifiable point available ?
for (int i = 0; i < geometry.identifications.Size() && !pi1; i++)
@ -191,8 +191,8 @@ namespace netgen
<< ", v = " << specpoints[startpoints[j]].v
<< " for copying (i,j = " << i << ", " << j << ")" << endl;
#endif
if (geometry.identifications[i]->IdentifyableCandidate (specpoints[startpoints[j]]) &&
geometry.identifications[i]->IdentifyableCandidate (specpoints[endpoints[j]]))
if (geometry.identifications[i]->IdentifiableCandidate (specpoints[startpoints[j]]) &&
geometry.identifications[i]->IdentifiableCandidate (specpoints[endpoints[j]]))
{
@ -201,7 +201,7 @@ namespace netgen
for (int k = 0; k < hsp.Size() && !pi1; k++)
{
//(*testout) << " ? identifyable with " << specpoints[hsp[k]].p
//(*testout) << " ? identifiable with " << specpoints[hsp[k]].p
//<< ", v = " << specpoints[hsp[k]].v
// << endl;
if (identification_used.Used (INDEX_2(i, startpoints[j])) ||
@ -212,12 +212,12 @@ namespace netgen
}
if (geometry.identifications[i]
->Identifyable(specpoints[startpoints[j]], specpoints[hsp[k]], specpoint2tlo, specpoint2surface) ||
->Identifiable(specpoints[startpoints[j]], specpoints[hsp[k]], specpoint2tlo, specpoint2surface) ||
geometry.identifications[i]
->Identifyable(specpoints[hsp[k]], specpoints[startpoints[j]], specpoint2tlo, specpoint2surface))
->Identifiable(specpoints[hsp[k]], specpoints[startpoints[j]], specpoint2tlo, specpoint2surface))
{
#ifdef DEVELOP
(*testout) << "identifyable: " << specpoints[hsp[k]].p << ", v = " << specpoints[hsp[k]].v
(*testout) << "identifiable: " << specpoints[hsp[k]].p << ", v = " << specpoints[hsp[k]].v
<< " and " << specpoints[startpoints[j]].p << ", v = " << specpoints[startpoints[j]].v
<< " (identification " << i+1 << ")" << endl;
#endif
@ -245,7 +245,7 @@ namespace netgen
}
// cannot copy from other ege ?
// cannot copy from other edge ?
if (!pi1)
checkedcopy = startpoints.Size();
@ -1680,9 +1680,9 @@ namespace netgen
(*geometry.identifications.Get(copyedgeidentification));
if (csi.Identifyable (mesh[frompi], mesh[topi]))
if (csi.Identifiable (mesh[frompi], mesh[topi]))
mesh.GetIdentifications().Add(frompi, topi, copyedgeidentification);
else if (csi.Identifyable (mesh[topi], mesh[frompi]))
else if (csi.Identifiable (mesh[topi], mesh[frompi]))
mesh.GetIdentifications().Add(topi, frompi, copyedgeidentification);
else
{

View File

@ -13,7 +13,7 @@ namespace netgen
/*
Explicit 2D Curve repesentation
Explicit 2D Curve representation
*/

View File

@ -36,24 +36,24 @@ void Identification :: IdentifySpecialPoints (NgArray<class SpecialPoint> & poin
int Identification ::
Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
Identifiable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const
{
cout << "Identification::Identifyable called for base-class" << endl;
cout << "Identification::Identifiable called for base-class" << endl;
return 0;
}
int Identification ::
Identifyable (const Point<3> & p1, const Point<3> & sp2) const
Identifiable (const Point<3> & p1, const Point<3> & sp2) const
{
cout << "Identification::Identifyable called for base-class" << endl;
cout << "Identification::Identifiable called for base-class" << endl;
return 0;
}
int Identification ::
IdentifyableCandidate (const SpecialPoint & sp1) const
IdentifiableCandidate (const SpecialPoint & sp1) const
{
return 1;
}
@ -196,7 +196,7 @@ void PeriodicIdentification :: IdentifySpecialPoints
*/
int PeriodicIdentification ::
Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
Identifiable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const
{
@ -252,7 +252,7 @@ Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
}
int PeriodicIdentification ::
Identifyable (const Point<3> & p1, const Point<3> & p2) const
Identifiable (const Point<3> & p1, const Point<3> & p2) const
{
return (s1->PointOnSurface (p1) &&
s2->PointOnSurface (p2));
@ -672,7 +672,7 @@ void CloseSurfaceIdentification :: IdentifySpecialPoints
*/
int CloseSurfaceIdentification ::
Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
Identifiable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const
{
@ -830,7 +830,7 @@ Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
}
int CloseSurfaceIdentification ::
Identifyable (const Point<3> & p1, const Point<3> & p2) const
Identifiable (const Point<3> & p1, const Point<3> & p2) const
{
// if (domain)
// if (!domain->GetSolid()->IsIn (p1) || !domain->GetSolid()->IsIn (p2))
@ -842,7 +842,7 @@ Identifyable (const Point<3> & p1, const Point<3> & p2) const
int CloseSurfaceIdentification ::
IdentifyableCandidate (const SpecialPoint & sp1) const
IdentifiableCandidate (const SpecialPoint & sp1) const
{
if (domain)
if (!domain->GetSolid()->IsIn (sp1.p))
@ -1544,7 +1544,7 @@ void CloseEdgesIdentification :: IdentifySpecialPoints
*/
int CloseEdgesIdentification ::
Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
Identifiable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const
{

View File

@ -38,13 +38,13 @@ namespace netgen
/// can identify both special points (fixed direction)
/// (identified points, same tangent)
virtual int Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
virtual int Identifiable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const;
///
virtual int Identifyable (const Point<3> & p1, const Point<3> & sp2) const;
virtual int Identifiable (const Point<3> & p1, const Point<3> & sp2) const;
/// is it possible to identify sp1 with some other ?
virtual int IdentifyableCandidate (const SpecialPoint & sp1) const;
virtual int IdentifiableCandidate (const SpecialPoint & sp1) const;
/// are points (if connected) by a short edge (direction anyhow) ?
virtual int ShortEdge (const SpecialPoint & sp1, const SpecialPoint & sp2) const;
@ -96,7 +96,7 @@ namespace netgen
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const override;
virtual int Identifyable (const Point<3> & p1, const Point<3> & sp2) const override;
virtual int Identifiable (const Point<3> & p1, const Point<3> & sp2) const override;
virtual int GetIdentifiedPoint (class Mesh & mesh, int pi1) override;
virtual void IdentifyPoints (class Mesh & mesh) override;
virtual void IdentifyFaces (class Mesh & mesh) override;
@ -150,8 +150,8 @@ namespace netgen
virtual int Identifyable (const SpecialPoint & sp1, const SpecialPoint & sp2,
const TABLE<int> & specpoint2solid,
const TABLE<int> & specpoint2surface) const;
virtual int Identifyable (const Point<3> & p1, const Point<3> & sp2) const;
virtual int IdentifyableCandidate (const SpecialPoint & sp1) const;
virtual int Identifiable (const Point<3> & p1, const Point<3> & sp2) const;
virtual int IdentifiableCandidate (const SpecialPoint & sp1) const;
virtual int ShortEdge (const SpecialPoint & sp1, const SpecialPoint & sp2) const;
virtual int GetIdentifiedPoint (class Mesh & mesh, int pi1);
const Array<double> & GetSlices () const { return slices; }

View File

@ -19,7 +19,7 @@ namespace netgen
/**
Singular Face.
Causes a bounday layer mesh refinement.
Causes a boundary layer mesh refinement.
All elements in subdomain domnr will get a boundary layer
on faces sharing the solid sol
*/

View File

@ -86,7 +86,7 @@ namespace netgen
///
double size;
///
double relydegtest; // maximal dimension of bisection intervall for
double relydegtest; // maximal dimension of bisection interval for
/// test of degeneration parameters
double cpeps1, epeps1, epeps2, epspointdist2;

View File

@ -258,7 +258,7 @@ Primitive * Primitive :: CreatePrimitive (const char * classname)
stringstream ost;
ost << "Primitve::CreatePrimitive not implemented for " << classname << endl;
ost << "Primitive::CreatePrimitive not implemented for " << classname << endl;
throw NgException (ost.str());
}
@ -266,7 +266,7 @@ Primitive * Primitive :: CreatePrimitive (const char * classname)
Primitive * Primitive :: Copy () const
{
stringstream ost;
ost << "Primitve::Copy not implemented for " << typeid(*this).name() << endl;
ost << "Primitive::Copy not implemented for " << typeid(*this).name() << endl;
throw NgException (ost.str());
}
@ -274,7 +274,7 @@ Primitive * Primitive :: Copy () const
void Primitive :: Transform (Transformation<3> & trans)
{
stringstream ost;
ost << "Primitve::Transform not implemented for " << typeid(*this).name() << endl;
ost << "Primitive::Transform not implemented for " << typeid(*this).name() << endl;
throw NgException (ost.str());
}

View File

@ -66,7 +66,7 @@ namespace netgen
if (!actsize)
{
throw Exception ("NgArray should not be empty");
// cerr << "NgArray souldn't be empty";
// cerr << "NgArray shouldn't be empty";
}
}
#endif

View File

@ -232,7 +232,7 @@ public:
inline void PrintMemInfo (ostream & ost) const
{
int els = AllocatedElements();
ost << "table: allocaed " << els
ost << "table: allocated " << els
<< " a " << sizeof(T) << " Byts = "
<< els * sizeof(T)
<< " bytes in " << Size() << " bags."

View File

@ -307,7 +307,7 @@ IntersectionType IntersectSplineSegment1( const Spline & s, const Point<2> & r0,
vbeta[0] = 1.0/(2*a_) * (-b_ + sqrt_det);
vbeta[1] = 1.0/(2*a_) * (-b_ - sqrt_det);
}
else // degenrate quadratic equation
else // degenerate quadratic equation
vbeta[0] = vbeta[1] = -c_/b_;
int dim = fabs(vr[0]) > fabs(vr[1]) ? 0 : 1;
@ -542,7 +542,7 @@ bool BisectIntersect( Spline p, Spline s, double &t0, double &t1, double &s0, do
bool left_hull_intersecting = IntersectTrigs( {left.StartPI(), left.TangentPoint(), left.EndPI()}, {curr.StartPI(), curr.TangentPoint(), curr.EndPI()});
bool right_hull_intersecting = IntersectTrigs( {right.StartPI(), right.TangentPoint(), right.EndPI()}, {curr.StartPI(), curr.TangentPoint(), curr.EndPI()});
// TODO: Additionaly check if one spline intersects with convex hull of other?
// TODO: Additionally check if one spline intersects with convex hull of other?
// // Check if one spline intersects with convex hull of spline
// if(left_hull_intersecting)
// {
@ -936,7 +936,7 @@ RelativePositionType oracle_spline_p(Point<2> q, Point<2> p1, Point<2> p1t, Poin
}
// (q,p2) is a spline segment, compare with tangent (qt,p2) instead of Segment (q,p2)
// BUT take care if tangent at p2 is collinear with eiter (p1,p2) or (p2,p3) (then use the segment (q,p2) again)
// BUT take care if tangent at p2 is collinear with either (p1,p2) or (p2,p3) (then use the segment (q,p2) again)
RelativePositionType oracle_spline_q(Point<2> q, Point<2> qt, Point<2> p1, Point<2> p2, Point<2> p3)
{
double s1 = Area( qt, p1, p2);
@ -1402,7 +1402,7 @@ void CreateResult(Solid2d & sp, Solid2d & sr, bool UNION)
//
// for all crossing vertices
//
// NOTE: all crossing vertices that are visited while contructing a
// NOTE: all crossing vertices that are visited while constructing a
// component of the result polygon are marked as "not intersection",
// so that they cannot serve as start vertex of another component
//

View File

@ -73,7 +73,7 @@ extern "C" {
// number of surface triangles
DLL_HEADER int Ng_GetNSE ();
// Get Point coordintes, index from 1 .. np
// Get Point coordinates, index from 1 .. np
DLL_HEADER void Ng_GetPoint (int pi, double * p);
// Get Element Points

View File

@ -568,7 +568,7 @@ namespace netgen
if(edge->primary == edge)
{
// check if start and end vertex are identified (if so, we only insert one segement and do z-refinement later)
// check if start and end vertex are identified (if so, we only insert one segment and do z-refinement later)
bool is_identified_edge = false;
auto v0 = vertices[edge->GetStartVertex().nr].get();
auto v1 = vertices[edge->GetEndVertex().nr].get();
@ -909,7 +909,7 @@ namespace netgen
Array<PointIndex, PointIndex> pmap(mesh.Points().Size());
pmap = PointIndex::INVALID;
// first map points on edges (mapped points alread in mesh, use search tree)
// first map points on edges (mapped points already in mesh, use search tree)
Array<bool, PointIndex> is_point_in_tree(mesh.Points().Size());
is_point_in_tree = false;
PointTree tree( bounding_box );

View File

@ -535,7 +535,7 @@ namespace netgen
if(mesh[points.Last()].Type() == FIXEDPOINT)
break;
if(!point_found)
throw Exception(string("Could not find connected list of line segements for edge ") + edgenr);
throw Exception(string("Could not find connected list of line segments for edge ") + edgenr);
}
// tangential part of growth vectors

View File

@ -848,7 +848,7 @@ namespace netgen
{
have_unknown_trigs = true;
// any edge of unkown trig already marked?
// any edge of unknown trig already marked?
for(auto i : IntRange(3))
{
INT<2> edge{el[(i+1)%3], el[(i+2)%3]};

View File

@ -33,7 +33,7 @@ namespace netgen
}
HPRefElement :: HPRefElement(Element & el) :
type(HP_NONE), index(el.GetIndex()), levelx(0), levely(0), levelz(0), np(el.GetNV()), domin(-1), domout(-1) //domin,out for segements
type(HP_NONE), index(el.GetIndex()), levelx(0), levely(0), levelz(0), np(el.GetNV()), domin(-1), domout(-1) //domin,out for segments
{
//Reset();
for (int i=0; i<np ; i++)
@ -48,7 +48,7 @@ namespace netgen
HPRefElement :: HPRefElement(Element2d & el) :
type(HP_NONE), index(el.GetIndex()), levelx(0), levely(0), levelz(0), np(el.GetNV()), domin(-1), domout(-1) //domin,out for segements
type(HP_NONE), index(el.GetIndex()), levelx(0), levely(0), levelz(0), np(el.GetNV()), domin(-1), domout(-1) //domin,out for segments
{
//Reset();
@ -1637,7 +1637,7 @@ bool CheckSingularities(Mesh & mesh, INDEX_2_HASHTABLE<int> & edges, INDEX_2_HAS
}
// if 2 adjacent edges of an element are singular, the
// commen point must be a singular point
// common point must be a singular point
for (int i = 1; i <= mesh.GetNE(); i++)
{
const Element & el = mesh.VolumeElement(i);

View File

@ -4606,7 +4606,7 @@ namespace netgen
if (bface[i] && bface[j])
if (!segedge[pi3map[i][j]][pi4map[i][j]])
{
// 2 boundary faces withoud edge in between
// 2 boundary faces without edge in between
el.SetLegal (0);
return 0;
}

View File

@ -61,7 +61,7 @@ namespace netgen
/// faces of rest-solid
NgArray<Element2d> openelements;
/// open segmenets for surface meshing
/// open segments for surface meshing
NgArray<Segment> opensegments;
Array<int> tets_in_qualclass;
@ -132,9 +132,9 @@ namespace netgen
/// changed after finishing global algorithm (improve, ...)
int majortimestamp;
/// mesh access semaphors.
/// mesh access semaphores.
NgMutex mutex;
/// mesh access semaphors.
/// mesh access semaphores.
NgMutex majormutex;
SymbolTable< NgArray<int>* > userdata_int;

View File

@ -17,7 +17,7 @@ namespace netgen
{
int domain;
// mesh for one domain (contains all adjacent surface elments)
// mesh for one domain (contains all adjacent surface elements)
unique_ptr<Mesh> mesh;
// maps from local (domain) mesh to global mesh
@ -133,7 +133,7 @@ namespace netgen
}
}
// add segmetns
// add segments
for(auto i : Range(ret))
{
auto & imap = ipmap[i];
@ -230,7 +230,7 @@ namespace netgen
pis.insert(map[sel[i]]);
}
// degenerate element (mapped element onto itself, might happend for surface elements connecting two identified faces)
// degenerate element (mapped element onto itself, might happen for surface elements connecting two identified faces)
if(pis.size() < 2*np)
continue;

View File

@ -241,7 +241,7 @@ namespace netgen
& edgenr & singedge_left & singedge_right
& si & cd2i & domin & domout & tlosurf
& surfnr1 & surfnr2
& bcname_dummy // keep this for backward compatiblity
& bcname_dummy // keep this for backward compatibility
& epgeominfo[0].edgenr & epgeominfo[1].edgenr;
}
@ -1570,7 +1570,7 @@ namespace netgen
}
default:
{
cout << "GetNodesLocal not impelemented for element " << GetType() << endl;
cout << "GetNodesLocal not implemented for element " << GetType() << endl;
np = 0;
}
}
@ -1676,7 +1676,7 @@ namespace netgen
}
default:
{
cout << "GetNodesLocal not impelemented for element " << GetType() << endl;
cout << "GetNodesLocal not implemented for element " << GetType() << endl;
np = 0;
pp = NULL;
}

View File

@ -1030,7 +1030,7 @@ namespace netgen
/// surface decoding index
int si;
/// co dim 2 deconding index
/// co dim 2 decoding index
int cd2i;
/// domain number inner side
int domin;

View File

@ -39,7 +39,7 @@ namespace ngcore
class SurfPointPackage
{
public:
int num; // point numebr
int num; // point number
int trignum; // STL geo info
double u, v; // OCC geo info
SurfPointPackage () { ; }
@ -502,7 +502,7 @@ namespace netgen
/**
Next, we send the identifications themselfs.
Next, we send the identifications themselves.
Info about periodic identifications sent to each proc is an array of
integers.
@ -872,7 +872,7 @@ namespace netgen
segm_buf.Add (dest, seg.singedge_right);
segm_buf.Add (dest, seg.singedge_left);
});
// distrubute segment data
// distribute segment data
for (int dest = 1; dest < ntasks; dest++)
sendrequests.Append (comm.ISend(segm_buf[dest], dest, MPI_TAG_MESH+5));

View File

@ -70,8 +70,8 @@ namespace netgen
else if (name == "parentfaces")
SetBuildParentFaces(set);
else
throw Exception ("noting known about table "+name +"\n"
"knwon are 'edges', 'faces', 'parentedges', 'parentfaces'");
throw Exception ("nothing known about table "+name +"\n"
"known are 'edges', 'faces', 'parentedges', 'parentfaces'");
}
bool MeshTopology :: static_buildedges = true;
@ -87,8 +87,8 @@ namespace netgen
else if (name == "vertex2element")
static_buildvertex2element = set;
else
throw Exception ("noting known about table "+name +"\n"
"knwon are 'edges', 'faces', 'vertex2element'");
throw Exception ("nothing known about table "+name +"\n"
"known are 'edges', 'faces', 'vertex2element'");
}
@ -753,7 +753,7 @@ namespace netgen
int orient_inner = 0;
paedge1 = INT<2> (pa0[0], pa0[1]);
paedge2 = INT<2> (pa1[0], pa1[1]);
// find common vertex and the thrid pa edge
// find common vertex and the third pa edge
if (pa0[0]==pa1[0]){// 00
//orient1 = 0;
orient2 = 1;

View File

@ -170,7 +170,7 @@ TopoDS_Vertex Partition_Inter2d::AddVonE(const TopoDS_Vertex& theV,
//-------------------------------------------------------------
// test if the points of intersection already exist. If not,
// add as descendants of the edges.
// nb: theses points are only vertices of intersection.
// nb: these points are only vertices of intersection.
//-------------------------------------------------------------
const TopTools_ListOfShape& VOnE1 = AsDes->Descendant(E1);
const TopTools_ListOfShape& VOnE2 = AsDes->Descendant(E2);
@ -247,7 +247,7 @@ TopoDS_Vertex Partition_Inter2d::AddVonE(const TopoDS_Vertex& theV,
// if 3 faces intersects each others, 3 new edges on them must pass
// through one vertex but real intersection points of each
// pair of edges are sometimes more far than a tolerance.
// Try to analitically find vertices that E1 and E2 must pass trough
// Try to analytically find vertices that E1 and E2 must pass through
TopoDS_Shape F1 = getOtherShape( theF, AsDes->Ascendant( E1 ));
TopoDS_Shape F2 = getOtherShape( theF, AsDes->Ascendant( E2 ));
@ -405,7 +405,7 @@ static void EdgesPartition(const TopoDS_Face& F,
// if E1 and E2 are results of intersection of F and two connex faces then
// no need to intersect edges, they can contact by vertices only
// (encounted an exception in TopOpeBRep_EdgesIntersector in such a case)
// (encountered an exception in TopOpeBRep_EdgesIntersector in such a case)
Standard_Boolean intersect = Standard_True;
TopTools_IndexedMapOfShape ME;
TopExp::MapShapes(F, TopAbs_EDGE, ME);

View File

@ -218,7 +218,7 @@ static void PutInBounds (const TopoDS_Face& F,
const Standard_Real Um = 0.34*f + 0.66*l;
gp_Pnt2d Pm = C2d->Value( Um );
// sometimes on shpere, pcurve is out of domain by V though S is
// sometimes on sphere, pcurve is out of domain by V though S is
// UPeriodic, sometimes it is in domain but nonetheless it has
// wrong position.
// Check pcurve position by 3D point
@ -499,7 +499,7 @@ void Partition_Inter3d::Inter3D(const TopoDS_Face& F1,
const TopoDS_Face& F = (ancRank == 1) ? F2 : F1;
// add se to face but dont add twice
// add se to face but don't add twice
TopTools_ListIteratorOfListOfShape itE( myAsDes->Descendant( F ));
if (myAsDes->HasDescendant( F )) {
for ( ; itE.More(); itE.Next())

View File

@ -1065,7 +1065,7 @@ void Partition_Spliter::MakeShells(const TopoDS_Shape& S,
NS = ShellMaker.MakeShells( myAddedFacesMap );
// Add faces added to new shell to myAddedFacesMap:
// avoid rebuilding twice commont part of 2 solids.
// avoid rebuilding twice common part of 2 solids.
TopTools_ListIteratorOfListOfShape itS(NS);
while ( itS.More()) {
TopExp_Explorer expF (itS.Value(), TopAbs_FACE);
@ -1664,7 +1664,7 @@ void Partition_Spliter::MergeEqualEdges (const TopTools_ListOfShape& LSE)
//=======================================================================
//function : KeepShapesInside
//purpose : remove shapes that are outside of S from resul
//purpose : remove shapes that are outside of S from result
//=======================================================================
void Partition_Spliter::KeepShapesInside (const TopoDS_Shape& S)
@ -1735,7 +1735,7 @@ void Partition_Spliter::KeepShapesInside (const TopoDS_Shape& S)
//=======================================================================
//function : RemoveShapesInside
//purpose : remove shapes that are inside S from resul
//purpose : remove shapes that are inside S from result
//=======================================================================
void Partition_Spliter::RemoveShapesInside (const TopoDS_Shape& S)
@ -1815,7 +1815,7 @@ void Partition_Spliter::RemoveShapesInside (const TopoDS_Shape& S)
TopoDS_Shell Shell;
myBuilder.MakeShell( Shell );
// exclude redundant internal face with edges encounterd only once
// exclude redundant internal face with edges encountered only once
TopTools_IndexedDataMapOfShapeListOfShape MEF;
TopTools_MapIteratorOfMapOfShape itF (RFM);
for ( ; itF.More(); itF.Next())

View File

@ -856,7 +856,7 @@ namespace netgen
cout << "Edges : " << nnre << " (" << nre << ")" << endl;
cout << "Vertices : " << nnrv << " (" << nrv << ")" << endl;
cout << endl;
cout << "Totol surface area : " << newsurfacecont << " (" << surfacecont << ")" << endl;
cout << "Total surface area : " << newsurfacecont << " (" << surfacecont << ")" << endl;
cout << endl;
}
@ -1555,7 +1555,7 @@ namespace netgen
writer.Write (shape, c_filename);
}
throw NgException ("Unkown target format: " + filename);
throw NgException ("Unknown target format: " + filename);
}
void OCCGeometry :: SaveToMeshFile (ostream & ost) const
@ -1587,7 +1587,7 @@ namespace netgen
else
{
if(format_version>current_format_version)
throw Exception("Loading OCCGeometry from archive: unkown format version "
throw Exception("Loading OCCGeometry from archive: unknown format version "
+ ToString(format_version)
+ ", written by netgen version "
+ ToString(netgen_version));
@ -1716,7 +1716,7 @@ namespace netgen
case TopAbs_VERTEX:
count2 = vmap.FindIndex(TopoDS::Vertex(e.Current())); break;
default:
cout << "RecursiveTopologyTree: Case " << e.Current().ShapeType() << " not handeled" << endl;
cout << "RecursiveTopologyTree: Case " << e.Current().ShapeType() << " not handled" << endl;
}
int nrsubshapes = 0;

View File

@ -370,7 +370,7 @@ namespace netgen
double u = gi.u;
double v = gi.v;
#ifdef OLD
// was a problem for pheres: got u-v paramters outside range of definition
// was a problem for pheres: got u-v parameters outside range of definition
gp_Pnt x = occface->Value (u,v);

View File

@ -1286,7 +1286,7 @@ DLL_HEADER void ExportNgOCCShapes(py::module &m)
double s0, s1;
auto curve = BRep_Tool::Curve(e, s0, s1);
return curve->Value(s);
}, py::arg("s"), "evaluate curve for paramters 's'")
}, py::arg("s"), "evaluate curve for parameters 's'")
.def("Tangent", [](const TopoDS_Edge & e, double s) {
gp_Pnt p; gp_Vec v;

View File

@ -212,7 +212,7 @@ STLGeometry * STLTopology :: LoadNaomi (istream & ist)
if (strcmp (buf, "NODES") == 0)
{
ist >> novertex;
PrintMessage(5,"nuber of vertices = ", novertex);
PrintMessage(5,"number of vertices = ", novertex);
for (i = 0; i < novertex; i++)
{
ist >> px;

View File

@ -111,7 +111,7 @@ namespace netgen
vssolution.vecfunction = vssolution.fieldlines_vecfunction;
}
// reset visoptions.scalfunction and visoptions.vecfunction if not avialable
// reset visoptions.scalfunction and visoptions.vecfunction if not available
if ( vssolution.scalfunction == -1 && strcmp (scalname, "none") != 0)
Tcl_SetVar ( interp, "::visoptions.scalfunction", "none", TCL_GLOBAL_ONLY );
if ( vssolution.vecfunction == -1 && strcmp (vecname, "none") != 0)

View File

@ -214,7 +214,7 @@ namespace netgen
case SOL_SURFACE_NONCONTINUOUS:
ost << " -type=surfacenoncontinuous"; break;
default:
cerr << "save solution data, case not handeld" << endl;
cerr << "save solution data, case not handled" << endl;
}
ost << endl;
@ -2019,7 +2019,7 @@ namespace netgen
double(iz)/n);
break;
default:
cerr << "case not implementd 878234" << endl;
cerr << "case not implemented 878234" << endl;
ploc = 0.0;
}
if (compress[ii] != -1)
@ -2889,7 +2889,7 @@ namespace netgen
break;
}
default:
cerr << "case not implementd 23523" << endl;
cerr << "case not implemented 23523" << endl;
}
for (int i = 0; i < np; i++)
@ -3408,7 +3408,7 @@ namespace netgen
return ok;
}
default:
cerr << "case not implementd 6565" << endl;
cerr << "case not implemented 6565" << endl;
}
return 0;
}
@ -3575,7 +3575,7 @@ namespace netgen
break;
}
default:
cerr << "case not implementd 2342" << endl;
cerr << "case not implemented 2342" << endl;
}
break;
}
@ -3844,7 +3844,7 @@ namespace netgen
break;
}
default:
cerr << "case not implented 3234" << endl;
cerr << "case not implemented 3234" << endl;
}
break;
}

View File

@ -4,7 +4,7 @@ interface, witch means that the same binary works with any stubs-aware
wish (i.e. version >= 8.1)
It has been tested on Windows NT/2000 and Linux for several Tcl/Tk versions up
to 8.4a3. I haven't been able to test the Mac port, it propably needs mending
to 8.4a3. I haven't been able to test the Mac port, it probably needs mending
but I can't see why it shouldn't work in principle.
Implementation wise, what differs from Togl 1.5 is that Togl_MakeWindowExist()
@ -16,6 +16,6 @@ same binary runs on all versions of Wish from 8.1 and up. For this to
work you need to compile against the headers from Tcl/Tk 8.4a3 or later, or
the binary will only work for Tcl/Tk 8.1-8.4a2.
The tk8.4a3 public headers (tk8.4a3.h + tkDecls.h) are included for
conveniance, and they are used if the flag -DUSE_LOCAL_TK_H is specified.
convenience, and they are used if the flag -DUSE_LOCAL_TK_H is specified.
Jonas Beskow, December 2001

View File

@ -844,7 +844,7 @@ make -C Togl install
<dt><code><var>pathName</var> swapbuffers</code>
<dd>
Causes front/back buffers to be swapped if in double buffer mode.
And flushs the OpenGL command buffer if in single buffer mode.
And flushes the OpenGL command buffer if in single buffer mode.
(So this is appropriate to call after every frame is drawn.)
</dl>
@ -900,7 +900,7 @@ make -C Togl install
type <code>make demos</code>.
The demos are compiled into shared libraries,
that can are loaded into the Tcl interpreter as Tcl/Tk-extensions.
Demos are started by running the corrsponding Tcl script.
Demos are started by running the corresponding Tcl script.
To run a demo just type <code>./double.tcl </code>or <code>./texture.tcl</code> etc.

View File

@ -67,7 +67,7 @@ File hierarchy:
*.html Start with index.html
The contents of the include and lib directories can be placed verbatim
in the Tcl installataion hierarchy.
in the Tcl installation hierarchy.
Documentation is in the doc directory. Start with doc/index.html in
your web browser.

View File

@ -4,7 +4,7 @@ interface, witch means that the same binary works with any stubs-aware
wish (i.e. version >= 8.1)
It has been tested on Windows NT/2000 and Linux for several Tcl/Tk versions up
to 8.4a3. I haven't been able to test the Mac port, it propably needs mending
to 8.4a3. I haven't been able to test the Mac port, it probably needs mending
but I can't see why it shouldn't work in principle.
Implementation wise, what differs from Togl 1.5 is that Togl_MakeWindowExist()
@ -16,6 +16,6 @@ same binary runs on all versions of Wish from 8.1 and up. For this to
work you need to compile against the headers from Tcl/Tk 8.4a3 or later, or
the binary will only work for Tcl/Tk 8.1-8.4a2.
The tk8.4a3 public headers (tk8.4a3.h + tkDecls.h) are included for
conveniance, and they are used if the flag -DUSE_LOCAL_TK_H is specified.
convenience, and they are used if the flag -DUSE_LOCAL_TK_H is specified.
Jonas Beskow, December 2001

View File

@ -55,7 +55,7 @@
should be replaced with the Togl
<a href="tclapi.html#stereo cmds">Tcl</a> or
<a href="capi.html#stereo">C</a> versions
for seemless stereo rendering.
for seamless stereo rendering.
<p>
The various stereo modes are:
<dl>

View File

@ -136,7 +136,7 @@ if {[lsearch [<i>pathName</i> extensions] GL_EXT_bgra] != -1]} {
<dt><code><var>pathName</var> swapbuffers</code>
<dd>
Causes front/back buffers to be swapped if in double buffer mode.
And flushs the OpenGL command buffer if in single buffer mode.
And flushes the OpenGL command buffer if in single buffer mode.
(So this is appropriate to call after every frame is drawn.)
</dl>

View File

@ -95,7 +95,7 @@
in the Togl source directory.
The C packages are compiled into shared libraries
that are loaded into the Tcl interpreter as Tcl/Tk-extensions.
The examples are started by running the corrsponding Tcl script:
The examples are started by running the corresponding Tcl script:
just type <code>./double.tcl</code>
(or <code>./texture.tcl</code> <i>etc.</i>)
or run under one of the Tcl interpreters, <i>i.e.</i>,

View File

@ -5112,7 +5112,7 @@ static int ObjectIsEmpty(Tcl_Obj *objPtr);
*
* GetStereo -
*
* Converts an internal int into a a Tcl string obj.
* Converts an internal int into a Tcl string obj.
*
* Results:
* Tcl_Obj containing the string representation of the stereo value.
@ -5282,7 +5282,7 @@ RestoreStereo(ClientData clientData, Tk_Window tkwin, char *internalPtr,
*
* GetWideInt -
*
* Converts an internal wide integer into a a Tcl WideInt obj.
* Converts an internal wide integer into a Tcl WideInt obj.
*
* Results:
* Tcl_Obj containing the wide int value.

View File

@ -222,7 +222,7 @@ proc editprimitivedialog2 { name } {
#
#
# Select primitve to edit
# Select primitive to edit
#
#

View File

@ -676,7 +676,7 @@ proc meshingoptionsdialog { } {
ttk::checkbutton $f.cb1.slowchecks -text "Slow checks" \
-variable debug.slowchecks -command { Ng_SetDebugParameters }
ttk::checkbutton $f.cb1.debugoutput -text "Debugging outout" \
ttk::checkbutton $f.cb1.debugoutput -text "Debugging output" \
-variable debug.debugoutput -command { Ng_SetDebugParameters }
ttk::checkbutton $f.cb1.haltexline -text "Halt on existing line" \
-variable debug.haltexistingline -command { Ng_SetDebugParameters }

View File

@ -190,7 +190,7 @@ proc AddRecentMeshFile { filename } {
}
loadmeshinifile;
# astrid ende
# astrid end
.ngmenu.file add command -label "Save Mesh..." -accelerator "<s><m>" \

View File

@ -1852,7 +1852,7 @@ DLL_HEADER const char * ngscript[] = {""
,"pack $f.cb1 -fill x -pady 15\n"
,"ttk::checkbutton $f.cb1.slowchecks -text \"Slow checks\" \\\n"
,"-variable debug.slowchecks -command { Ng_SetDebugParameters }\n"
,"ttk::checkbutton $f.cb1.debugoutput -text \"Debugging outout\" \\\n"
,"ttk::checkbutton $f.cb1.debugoutput -text \"Debugging output\" \\\n"
,"-variable debug.debugoutput -command { Ng_SetDebugParameters }\n"
,"ttk::checkbutton $f.cb1.haltexline -text \"Halt on existing line\" \\\n"
,"-variable debug.haltexistingline -command { Ng_SetDebugParameters }\n"

View File

@ -113,10 +113,10 @@ int main (int argc, char ** argv)
Ng_SaveMesh(mesh,"test.vol");
// refinement without geomety adaption:
// refinement without geometry adaption:
// Ng_Uniform_Refinement (mesh);
// refinement with geomety adaption:
// refinement with geometry adaption:
Ng_STL_Uniform_Refinement (stl_geom, mesh);
cout << "elements after refinement: " << Ng_GetNE(mesh) << endl;

View File

@ -16,9 +16,9 @@ m2 = geo2.GenerateMesh (maxh=0.05)
m2.Refine()
m2.Refine()
print ("***************************")
print ("** merging suface meshes **")
print ("***************************")
print ("****************************")
print ("** merging surface meshes **")
print ("****************************")
# create an empty mesh
mesh = Mesh()

View File

@ -11,7 +11,7 @@ solid cube = plane (0, 0, 0; 0, 0, -1)
and plane (1, 1, 1; 0, 1, 0)
and plane (1, 1, 1; 1, 0, 0);
# two shperes
# two spheres
solid sph1 = sphere (0.5, 0.5, 0.5; 0.58);
solid sph2 = sphere (0.5, 0.5, 0.5; 0.75);