Merge branch 'V7_dev'

CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -87,7 +87,8 @@ MARK_AS_ADVANCED(SALOME_BUILD_GUI SALOME_SMESH_USE_CGNS SALOME_SMESH_USE_TBB)
 
 # Various
 # Python
-FIND_PACKAGE(SalomePython REQUIRED)
+FIND_PACKAGE(SalomePythonInterp REQUIRED)
+FIND_PACKAGE(SalomePythonLibs REQUIRED)
 # PThread
 FIND_PACKAGE(SalomePThread REQUIRED)
 # SWIG

INSTALL

@@ -1 +0,0 @@
-SALOME2 : SMESH module

LICENCE

@@ -1,504 +0,0 @@
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
-
-

README

@@ -0,0 +1,119 @@
+*****************
+About SALOME Mesh
+*****************
+
+SALOME Mesh module implements the functionalities for:
+- Creating meshes in different ways:
+  * By meshing geometrical models previously created or imported by the Geometry
+    component;
+  * Bottom-up, using mesh edition operations, especially extrusion and revolution;
+  * By generation of the 3D mesh from the 2D mesh (the latter can be either imported
+    or manually created).
+- Importing and exporting meshes in various formats.
+- Modifying meshes with a vast array of dedicated operations.
+- Creating groups of mesh elements.
+- Filtering mesh entities (nodes or elements) using Filters functionality for
+  creating groups and applying mesh modifications.
+- Viewing meshes in the VTK viewer and getting info on mesh and its sub-objects.
+- Applying to meshes Quality Controls, allowing to highlight important elements.
+- Taking various measurements of the mesh objects.
+
+For more information please visit the SALOME platform web site:
+
+  <http://www.salome-platform.org/>
+
+=======
+License
+=======
+
+SALOME platform is distributed under the GNU Lesser General Public License.
+See COPYING file for more details.
+
+Also, additional information can be found at SALOME platform web site:
+
+  <http://www.salome-platform.org/downloads/license/>
+
+============
+Installation
+============
+
+--------------
+Pre-requisites
+--------------
+
+SALOME platform relies on a set of third-party softwares; some of them are needed
+at build time only, while other ones are needed in runtime also.
+
+For more information about the pre-requisites please visit SALOME platform web
+site:
+
+* Check Release Notes and Software Requirements of the latest SALOME release at
+
+  <http://www.salome-platform.org/downloads/current-version/>
+
+* Pre-requisites page at SALOME web site:
+
+  <http://www.salome-platform.org/downloads/license/>
+
+Note: SALOME Mesh module needs SALOME KERNEL, SALOME GUI and SALOME Geometry as
+pre-requisites.
+
+------------------
+Basic Installation
+------------------
+
+The build procedure of the SALOME platform is implemented with CMake.
+In order to build the module you have to do the following actions: 
+
+1. Set up environment for pre-requisites (see "Pre-requisites" section above).
+
+2. Create a build directory:
+
+   % mkdir SMESH_BUILD
+
+3. Configure the build procedure:
+
+   % cd SMESH_BUILD
+   % cmake -DCMAKE_BUILD_TYPE=<mode> -DCMAKE_INSTALL_PREFIX=<installation_directory> <path_to_src_dir>
+
+   where
+   - <mode> is either Release or Debug (default: Release);
+   - <installation_directory> is a destination folder to install SALOME Mesh
+      module (default: /usr); 
+   - <path_to_src_dir> is a path to the SALOME Mesh sources directory.
+
+   Note: by default (if CMAKE_INSTALL_PREFIX option is not given), SALOME Mesh
+   module will be configured for installation to the /usr directory that requires
+   root permissions to complete the installation.
+
+4. Build and install:
+
+   % make
+   % make install
+
+   This will install SALOME Mesh module to the <installation_directory>
+   specified to cmake command on the previous step.
+
+-------------------
+Custom installation
+-------------------
+
+SALOME Mesh module supports a set of advanced configuration options;
+for more details learn CMakeLists.txt file in the root source directory.
+
+You can also use other options of cmake command to customize your installation.
+Learn more about available options by typing
+
+   % cmake --help
+
+=============
+Documentation
+=============
+
+The directory doc contains additional documentation file of SALOME Mesh module.
+
+===============
+Troubleshooting
+===============
+
+Please, send a mail to webmaster.salome@opencascade.com.

SMESH_version.h.in

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

SalomeSMESHConfig.cmake.in

@@ -5,7 +5,7 @@
 #
 
 ###############################################################
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/cmake_files/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindCGNS.cmake

@@ -5,7 +5,7 @@
 #
 
 #########################################################################
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/cmake_files/FindSMESH.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomeCGNS.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomeSMESH.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomeTBB.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindSalomef2c.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2013-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2013-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/cmake_files/FindTBB.cmake

@@ -5,7 +5,7 @@
 #
 
 #########################################################################
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/cmake_files/Findf2c.cmake

@@ -6,7 +6,7 @@
 #
 
 #########################################################################
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

adm_local/unix/config_files/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_Platform.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_SMESH.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_cgal.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_cgns.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_f77.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_padder.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

adm_local/unix/config_files/check_qwt.m4

@@ -1,4 +1,4 @@
-dnl Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+dnl Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 dnl
 dnl Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 dnl CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

bin/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

bin/smesh_setenv.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

cvs-tags

@@ -1,35 +0,0 @@
-Start-v1_1a: ?
-	?
-	
-V1_2_1:	?
-	?
-
-V1_2_2:	2003-09-26 17:00
-	New data structure in SMDS.
-
-nadir_1_2_2: 2003-10-06 12:50
-	Branch after V1_2_2. Developpement branch for user nadir
-
-merge_1_2_c__1_2_2: 2003-10-17 14:35
-	Branch after V1_2_2. Branch to merge Salome 1.2c. Initiated by Paul Rascle.
-
-MergeV1_2c-1: 2003-10-19 13:49
-	End of merge_1_2_c__1_2_2 branch. This branch is ready to be merge with the head.
-
-V1_3_0b1: 2003-11-12
-	First pre-release of 1.3.0. Include the merge of 1.2c branch.
-
-nadir_update_MED_v1_3_0: 2003-11-17 10:22
-	New branch for user nadir. Synchronization of API with MED 1.3.
-
-V1_3_0b2: 2003-11-18
-	Second pre-release of 1.3.0. Synchronization of API with MED 1.3.
-
-V1_3_0: 2003-11-25 08:52
-	Release 1.3.0.
-
-V1_3_1: 2004-01-05 14:28
-	Release 1.3.1. Added Netgen.
-
-merge_1_2_d: 2003-01-20 11:25
-	Branch to merge Release 1.2d of Salome Pro.

doc/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/examples/3dmesh.py

@@ -2,17 +2,16 @@
 
 import salome
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
 
-import SMESH, SALOMEDS
+import SMESH
 from salome.smesh import smeshBuilder
 smesh =  smeshBuilder.New(salome.myStudy)
 
 ###
 # Geometry: an assembly of a box, a cylinder and a truncated cone
-# meshed with tetrahedral 
+# to be meshed with tetrahedra
 ###
 
 # Define values
@@ -44,14 +43,14 @@ piece = geompy.MakeFuse(box_cyl, cone)
 geompy.addToStudy(piece, name) 
 
 # Create a group of faces
-group = geompy.CreateGroup(piece, geompy.ShapeType["FACE"]) 
+faces_group = geompy.CreateGroup(piece, geompy.ShapeType["FACE"]) 
 group_name = name + "_grp" 
-geompy.addToStudy(group, group_name) 
+geompy.addToStudy(faces_group, group_name) 
-group.SetName(group_name) 
+faces_group.SetName(group_name) 
 
 # Add faces to the group
 faces = geompy.SubShapeAllIDs(piece, geompy.ShapeType["FACE"]) 
-geompy.UnionIDs(group, faces) 
+geompy.UnionIDs(faces_group, faces) 
 
 ###
 # Create a mesh
@@ -60,20 +59,20 @@ geompy.UnionIDs(group, faces)
 # Define a mesh on a geometry
 tetra = smesh.Mesh(piece, name) 
 
-# Define 1D hypothesis
+# Define 1D algorithm and hypothesis
 algo1d = tetra.Segment() 
 algo1d.LocalLength(10) 
 
-# Define 2D hypothesis
+# Define 2D algorithm and hypothesis
 algo2d = tetra.Triangle() 
 algo2d.LengthFromEdges() 
 
-# Define 3D hypothesis
+# Define 3D algorithm and hypothesis
 algo3d = tetra.Tetrahedron()
 algo3d.MaxElementVolume(100) 
 
 # Compute the mesh
 tetra.Compute() 
 
-# Create a groupe of faces
+# Create a mesh group of all triangles generated on geom faces present in faces_group
-tetra.Group(group)
+group = tetra.Group(faces_group)

doc/salome/examples/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -95,6 +95,9 @@ SET(GOOD_TESTS
   filters_ex33.py
   filters_ex34.py
   filters_ex36.py
+  filters_ex37.py
+  filters_ex38.py
+  filters_ex39.py
   filters_belong2group.py
   grouping_elements_ex01.py
   grouping_elements_ex02.py

doc/salome/examples/CTestTestfileInstall.cmake

@@ -1,4 +1,4 @@
-# Copyright (C) 2015  CEA/DEN, EDF R&D
+# Copyright (C) 2015-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

doc/salome/examples/creating_meshes_ex02.py

@@ -1,4 +1,4 @@
-# Construction of a Submesh
+# Construction of a Sub-mesh
 
 import salome
 salome.salome_init()
@@ -20,27 +20,31 @@ EdgeX = geompy.GetEdgeNearPoint(box, p5)
 geompy.addToStudyInFather(box, EdgeX, "Edge [0,0,0 - 10,0,0]")
 
 # create a hexahedral mesh on the box
-quadra = smesh.Mesh(box, "Box : quadrangle 2D mesh")
+mesh = smesh.Mesh(box, "Box : hexahedral 3D mesh")
 
-# create a regular 1D algorithm for the faces
+# create a Regular_1D algorithm for discretization of edges
-algo1D = quadra.Segment()
+algo1D = mesh.Segment()
 
 # define "NumberOfSegments" hypothesis to cut
 # all the edges in a fixed number of segments
 algo1D.NumberOfSegments(4)
 
 # create a quadrangle 2D algorithm for the faces
-quadra.Quadrangle()
+mesh.Quadrangle()
 
-# construct a submesh on the edge with a local hypothesis
+# construct a sub-mesh on the edge with a local Regular_1D algorithm
-algo_local = quadra.Segment(EdgeX)
+algo_local = mesh.Segment(EdgeX)
 
-# define "Arithmetic1D" hypothesis to cut the edge in several segments with increasing arithmetic length
+# define "Arithmetic1D" hypothesis to cut EdgeX in several segments with length arithmetically
+# increasing from 1.0 to 4.0
 algo_local.Arithmetic1D(1, 4)
 
-# define "Propagation" hypothesis that propagates all other hypotheses
+# define "Propagation" hypothesis that propagates algo_local and "Arithmetic1D" hypothesis
-# on all edges of the opposite side in case of quadrangular faces
+# on all parallel edges of the box
 algo_local.Propagation()
 
+# assign a hexahedral algorithm
+mesh.Hexahedron()
+
 # compute the mesh
-quadra.Compute()
+mesh.Compute()

doc/salome/examples/creating_meshes_ex03.py

@@ -1,4 +1,4 @@
-# Change priority of submeshes in Mesh
+# Change priority of sub-meshes in Mesh
 
 import salome
 salome.salome_init()
@@ -16,47 +16,44 @@ Box_1 = geompy.MakeBoxDXDYDZ(200, 200, 200)
 # create Mesh object on Box shape
 Mesh_1 = smesh.Mesh(Box_1)
 
-# assign mesh algorithms
+# assign mesh algorithms and hypotheses
 Regular_1D = Mesh_1.Segment()
 Nb_Segments_1 = Regular_1D.NumberOfSegments(20)
-Nb_Segments_1.SetDistrType( 0 )
 MEFISTO_2D = Mesh_1.Triangle()
 Max_Element_Area_1 = MEFISTO_2D.MaxElementArea(1200)
 Tetrahedron = Mesh_1.Tetrahedron()
 Max_Element_Volume_1 = Tetrahedron.MaxElementVolume(40000)
 
-# create submesh and assign algorithms on Face_1
+# create sub-mesh and assign algorithms on Face_1
 Regular_1D_1 = Mesh_1.Segment(geom=Face_1)
 Nb_Segments_2 = Regular_1D_1.NumberOfSegments(4)
-Nb_Segments_2.SetDistrType( 0 )
 MEFISTO_2D_1 = Mesh_1.Triangle(algo=smeshBuilder.MEFISTO,geom=Face_1)
-Length_From_Edges_2D = MEFISTO_2D_1.LengthFromEdges()
 SubMesh_1 = MEFISTO_2D_1.GetSubMesh()
 
-# create submesh and assign algorithms on Face_2
+# create sub-mesh and assign algorithms on Face_2
 Regular_1D_2 = Mesh_1.Segment(geom=Face_2)
 Nb_Segments_3 = Regular_1D_2.NumberOfSegments(8)
-Nb_Segments_3.SetDistrType( 0 )
 MEFISTO_2D_2 = Mesh_1.Triangle(algo=smeshBuilder.MEFISTO,geom=Face_2)
-Length_From_Edges_2D_1 = MEFISTO_2D_2.LengthFromEdges()
 SubMesh_2 = MEFISTO_2D_2.GetSubMesh()
 
-# create submesh and assign algorithms on Face_3
+# create sub-mesh and assign algorithms on Face_3
 Regular_1D_3 = Mesh_1.Segment(geom=Face_3)
 Nb_Segments_4 = Regular_1D_3.NumberOfSegments(12)
-Nb_Segments_4.SetDistrType( 0 )
 MEFISTO_2D_3 = Mesh_1.Triangle(algo=smeshBuilder.MEFISTO,geom=Face_3)
-Length_From_Edges_2D_2 = MEFISTO_2D_3.LengthFromEdges()
 SubMesh_3 = MEFISTO_2D_3.GetSubMesh()
 
-# check exisiting submesh priority order
+# check exisiting sub-mesh priority order
 [ [ SubMesh_1, SubMesh_3, SubMesh_2 ] ] = Mesh_1.GetMeshOrder()
-# set new submesh order
+isDone = Mesh_1.Compute()
+print "Nb elements at initial order of sub-meshes:", Mesh_1.NbElements()
+
+# set new sub-mesh order
 isDone = Mesh_1.SetMeshOrder( [ [ SubMesh_1, SubMesh_2, SubMesh_3 ] ])
 # compute mesh
 isDone = Mesh_1.Compute()
+print "Nb elements at new order of sub-meshes:", Mesh_1.NbElements()
 
-# clear mesh result and compute with other submesh order
+# compute with other sub-mesh order
-Mesh_1.Clear()
 isDone = Mesh_1.SetMeshOrder( [ [ SubMesh_2, SubMesh_1, SubMesh_3 ] ])
 isDone = Mesh_1.Compute()
+print "Nb elements at another order of sub-meshes:", Mesh_1.NbElements()

doc/salome/examples/creating_meshes_ex04.py

@@ -46,8 +46,7 @@ tria.Compute()
 PrintMeshInfo(tria)
 
 # remove a local hypothesis
-mesh = tria.GetMesh()
+tria.RemoveHypothesis(hyp4, edge)
-mesh.RemoveHypothesis(edge, hyp4)
 
 # compute the mesh
 tria.Compute()

doc/salome/examples/creating_meshes_ex06.py

@@ -1,5 +1,8 @@
 # Creating a hexahedral mesh on a cylinder.
-# Note: it is a copy of 'ex24_cylinder.py' from SMESH_SWIG
+#
+# This example uses Partition to divide the cylinder into blocks, which is
+# a general approach. But for the case of cylinder there is a dedicated
+# command creating a blocked cylinder: geompy.MakeDividedCylinder()
 
 import salome
 salome.salome_init()
@@ -22,7 +25,7 @@ height = 200
 # Build a cylinder
 # ----------------
 
-base = geompy.MakeVertex(0, 0, 0)
+base      = geompy.MakeVertex(0, 0, 0)
 direction = geompy.MakeVectorDXDYDZ(0, 0, 1)
 
 cylinder = geompy.MakeCylinder(base, direction, radius, height)
@@ -34,9 +37,9 @@ geompy.addToStudy(cylinder, "cylinder")
 
 size = radius/2.0
 
-box_rot = geompy.MakeBox(-size, -size, 0,  +size, +size, height)
+box_rot  = geompy.MakeBox(-size, -size, 0,  +size, +size, height)
 box_axis = geompy.MakeLine(base, direction)
-box = geompy.MakeRotation(box_rot, box_axis, math.pi/4)
+box      = geompy.MakeRotation(box_rot, box_axis, math.pi/4)
 
 hole = geompy.MakeCut(cylinder, box)
 
@@ -47,8 +50,8 @@ plane_b = geompy.MakePlane(base, geompy.MakeVectorDXDYDZ(0, 1, 0), plane_trim)
 
 blocks_part = geompy.MakePartition([hole], [plane_a, plane_b], [], [], geompy.ShapeType["SOLID"])
 blocks_list = [box] + geompy.SubShapeAll(blocks_part, geompy.ShapeType["SOLID"])
-blocks_all = geompy.MakeCompound(blocks_list)
+blocks_all  = geompy.MakeCompound(blocks_list)
-blocks = geompy.MakeGlueFaces(blocks_all, 0.0001)
+blocks      = geompy.MakeGlueFaces(blocks_all, 0.0001)
 
 geompy.addToStudy(blocks, "cylinder:blocks")
 
@@ -59,8 +62,7 @@ def group(name, shape, type, base=None, direction=None):
     t = geompy.ShapeType[type]
     g = geompy.CreateGroup(shape, t)
 
-    geompy.addToStudy(g, name)
+    geompy.addToStudyInFather(shape, g, name)
-    g.SetName(name)
 
     if base!=None:
         l = geompy.GetShapesOnPlaneWithLocationIDs(shape, t, direction, base, GEOM.ST_ON)
@@ -73,7 +75,7 @@ group_a = group("baseA", blocks, "FACE", base, direction)
 base_b  = geompy.MakeVertex(0, 0, height)
 group_b = group("baseB", blocks, "FACE", base_b, direction)
 
-group_1 = group("limit", blocks, "SOLID")
+group_1     = group("limit", blocks, "SOLID")
 group_1_all = geompy.SubShapeAllIDs(blocks, geompy.ShapeType["SOLID"])
 geompy.UnionIDs(group_1, group_1_all)
 group_1_box = geompy.GetBlockNearPoint(blocks, base)
@@ -84,12 +86,12 @@ geompy.DifferenceList(group_1, [group_1_box])
 
 smesh.SetCurrentStudy(salome.myStudy)
 
-def discretize(x, y, z,  n, s=blocks):
+def discretize(x, y, z,  nbSeg, shape=blocks):
-    p = geompy.MakeVertex(x, y, z)
+    vert = geompy.MakeVertex( x, y, z )
-    e = geompy.GetEdgeNearPoint(s, p)
+    edge = geompy.GetEdgeNearPoint( shape, vert )
-    a = hexa.Segment(e)
+    algo = hexa.Segment( edge )
-    a.NumberOfSegments(n)
+    algo.NumberOfSegments( nbSeg )
-    a.Propagation()
+    algo.Propagation()
 
 hexa = smesh.Mesh(blocks)
 

doc/salome/examples/creating_meshes_ex08.py

@@ -14,7 +14,7 @@ smesh =  smeshBuilder.New(salome.myStudy)
 box = geompy.MakeBoxDXDYDZ(100,100,100)
 face = geompy.SubShapeAllSorted(box, geompy.ShapeType["FACE"])[0]
 
-# generate 3D mesh
+# generate a prismatic 3D mesh
 mesh = smesh.Mesh(box)
 localAlgo = mesh.Triangle(face)
 mesh.AutomaticHexahedralization()
@@ -44,4 +44,4 @@ nodeIds = nGroup.GetIDs()[-10:]
 newMesh = smesh.CopyMesh( mesh.GetIDSource( nodeIds, SMESH.NODE), "some nodes copy")
 
 # 6. copy a sub-mesh
-newMesh = smesh.CopyMesh( subMesh, "submesh copy" )
+newMesh = smesh.CopyMesh( subMesh, "sub-mesh copy" )

doc/salome/examples/defining_hypotheses_ex05.py

@@ -37,7 +37,7 @@ algo.NumberOfSegments(20)
 # assign triangulation algorithm
 algo = tria_mesh.Triangle()
 
-# apply "Max Element Area" hypothesis to each triangle
+# assign "Max Element Area" hypothesis
 algo.MaxElementArea(100)
 
 # compute the mesh

doc/salome/examples/defining_hypotheses_ex07.py

@@ -24,12 +24,13 @@ tria = smesh.Mesh(face1, "Face : triangle 2D mesh")
 
 # Define 1D meshing
 algo1D = tria.Segment()
-algo1D.NumberOfSegments(2)
+algo1D.LocalLength(3.)
 
 # create and assign the algorithm for 2D meshing with triangles
 algo2D = tria.Triangle()
 
-# create and assign "LengthFromEdges" hypothesis to build triangles based on the length of the edges taken from the wire
+# create and assign "LengthFromEdges" hypothesis to build triangles with
+# linear size close to the length of the segments generated on the face wires (3.)
 algo2D.LengthFromEdges()
 
 # compute the mesh

doc/salome/examples/defining_hypotheses_ex09.py

@@ -14,7 +14,7 @@ smesh =  smeshBuilder.New(salome.myStudy)
 box = geompy.MakeBoxDXDYDZ(10., 10., 10.)
 geompy.addToStudy(box, "Box")
 
-# 1. Create a hexahedral mesh on the box
+# Create a hexahedral mesh on the box
 hexa = smesh.Mesh(box, "Box : hexahedrical mesh")
 
 # create a Regular 1D algorithm for edges

doc/salome/examples/defining_hypotheses_ex10.py

@@ -24,7 +24,7 @@ faces = geompy.SubShapeAll(box, geompy.ShapeType["FACE"])
 f1 = faces[2]
 f2 = faces[0]
 # face opposite to f2
-f2opp = faces[1]
+f2opp = geompy.GetOppositeFace( box, f2 )
 
 # Get vertices used to specify how to associate sides of faces at projection
 [v1F1, v2F1] = geompy.SubShapeAll(f1, geompy.ShapeType["VERTEX"])[:2]
@@ -48,7 +48,7 @@ src_mesh = smesh.Mesh(box, "Source mesh")
 src_mesh.Segment().NumberOfSegments(9,10)
 src_mesh.Quadrangle()
 src_mesh.Hexahedron()
-src_mesh.Triangle(f1) # triangular sumbesh 
+src_mesh.Triangle(f1) # triangular sub-mesh
 src_mesh.Compute()
 
 

doc/salome/examples/defining_hypotheses_ex11.py

@@ -27,7 +27,8 @@ geompy.addToStudy( box, 'box' )
 geompy.addToStudyInFather( box, Face_1, 'Face_1' )
 geompy.addToStudyInFather( box, Face_2, 'Face_2' )
 
-# Make the source mesh with Netgem2D
+
+# Make the source mesh triangulated by MEFISTO
 src_mesh = smesh.Mesh(Face_1, "Source mesh")
 src_mesh.Segment().NumberOfSegments(15)
 src_mesh.Triangle()

doc/salome/examples/defining_hypotheses_ex13.py

@@ -13,8 +13,7 @@ smesh =  smeshBuilder.New(salome.myStudy)
 # Create face from the wire and add to study
 Face = geompy.MakeSketcher("Sketcher:F 0 0:TT 20 0:R 90:C 20 90:WF", [0, 0, 0, 1, 0, 0, 0, 0, 1])
 geompy.addToStudy(Face,"Face")
-edges = geompy.SubShapeAllSorted(Face, geompy.ShapeType["EDGE"])
+circle, radius1, radius2 = geompy.SubShapeAllSorted(Face, geompy.ShapeType["EDGE"])
-circle, radius1, radius2 = edges
 geompy.addToStudyInFather(Face, radius1,"radius1")
 geompy.addToStudyInFather(Face, radius2,"radius2")
 geompy.addToStudyInFather(Face, circle,"circle")

doc/salome/examples/filters_belong2group.py

@@ -2,15 +2,16 @@
 
 # create mesh
 from SMESH_mechanic import *
+print
 
 # create a group of all faces (quadrangles) generated on sub_face3
-faces_on_face3 = mesh.MakeGroup("faces_on_face3", SMESH.FACE, SMESH.FT_BelongToGeom,'=',sub_face3)
+quads_on_face3 = mesh.MakeGroup("quads_on_face3", SMESH.FACE, SMESH.FT_BelongToGeom,'=',sub_face3)
-print "There are %s quadrangles generated on '%s' and included in the group '%s'" % ( faces_on_face3.Size(), sub_face3.GetName(), faces_on_face3.GetName() )
+print "There are %s quadrangles generated on '%s' and included in the group '%s'" % ( quads_on_face3.Size(), sub_face3.GetName(), quads_on_face3.GetName() )
 
 # create a group of all the rest quadrangles, generated on other faces by combining 2 criteria:
-# - negated FT_BelongToMeshGroup to select elements not included in faces_on_face3
+# - negated FT_BelongToMeshGroup to select elements not included in quads_on_face3
 # - FT_ElemGeomType to select quadrangles
-not_on_face3 = smesh.GetCriterion( SMESH.FACE, SMESH.FT_BelongToMeshGroup,'=',faces_on_face3, SMESH.FT_LogicalNOT )
+not_on_face3 = smesh.GetCriterion( SMESH.FACE, SMESH.FT_BelongToMeshGroup,'=',quads_on_face3, SMESH.FT_LogicalNOT )
 quadrangles  = smesh.GetCriterion( SMESH.FACE, SMESH.FT_ElemGeomType,'=',SMESH.Geom_QUADRANGLE )
 
 rest_quads = mesh.MakeGroupByCriteria("rest_quads", [ not_on_face3, quadrangles ])

doc/salome/examples/filters_ex01.py

@@ -1,16 +1,22 @@
 # Aspect ratio
+# This script demonstrates various usages of filters
 
 # create mesh
 from SMESH_mechanic import *
 
-# get faces with aspect ratio > 1.5
+# get faces with aspect ratio > 2.5
-filter = smesh.GetFilter(SMESH.FACE, SMESH.FT_AspectRatio, SMESH.FT_MoreThan, 1.5)
+filter = smesh.GetFilter(SMESH.FACE, SMESH.FT_AspectRatio, SMESH.FT_MoreThan, 2.5)
 ids = mesh.GetIdsFromFilter(filter)
+print "Number of faces with aspect ratio > 2.5:", len(ids)
+
+# get faces with aspect ratio > 1.5
+filter = smesh.GetFilter(SMESH.FACE, SMESH.FT_AspectRatio, '>', 1.5, mesh=mesh)
+ids = filter.GetIDs()
 print "Number of faces with aspect ratio > 1.5:", len(ids)
 
 # copy the faces with aspect ratio > 1.5 to another mesh;
 # this demostrates that a filter can be used where usually a group or sub-mesh is acceptable
-filter.SetMesh( mesh.GetMesh() )
+filter.SetMesh( mesh.GetMesh() ) # - actually non necessary as mesh is set at filter creation
 mesh2 = smesh.CopyMesh( filter, "AR > 1.5" )
 print "Number of copied faces with aspect ratio > 1.5:", mesh2.NbFaces()
 

doc/salome/examples/filters_ex09.py

@@ -1,23 +1,21 @@
 # Free borders
 
-# create mesh
+# initialize SALOME and modules
-
+import salome, SMESH
-import salome
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
-
-import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
 smesh =  smeshBuilder.New(salome.myStudy)
 
+# create mesh
 face = geompy.MakeFaceHW(100, 100, 1)
 geompy.addToStudy( face, "quadrangle" )
 mesh = smesh.Mesh(face)
 mesh.Segment().NumberOfSegments(10)
 mesh.Triangle().MaxElementArea(25)
 mesh.Compute()
+
 # get all free borders
 filter = smesh.GetFilter(SMESH.EDGE, SMESH.FT_FreeBorders)
 ids = mesh.GetIdsFromFilter(filter)

doc/salome/examples/filters_ex10.py

@@ -1,23 +1,21 @@
 # Free edges
 
-# create mesh
+# initialize SALOME and modules
-
+import salome, SMESH
-import salome
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
-
-import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
 smesh =  smeshBuilder.New(salome.myStudy)
 
+# create mesh
 face = geompy.MakeFaceHW(100, 100, 1)
 geompy.addToStudy( face, "quadrangle" )
 mesh = smesh.Mesh(face)
 mesh.Segment().NumberOfSegments(10)
 mesh.Triangle().MaxElementArea(25)
 mesh.Compute()
+
 # get all faces with free edges
 filter = smesh.GetFilter(SMESH.FACE, SMESH.FT_FreeEdges)
 ids = mesh.GetIdsFromFilter(filter)

doc/salome/examples/filters_ex13.py

@@ -4,7 +4,7 @@
 from SMESH_mechanic import *
 # remove some faces to have faces with bare borders
 mesh.RemoveElements( mesh.GetElementsByType(SMESH.FACE)[0:5] )
-# get all faces bare borders
+# get all faces with bare borders
 filter = smesh.GetFilter(SMESH.FACE, SMESH.FT_BareBorderFace)
 ids = mesh.GetIdsFromFilter(filter)
 print "Faces with bare borders:", ids

doc/salome/examples/filters_ex17.py

@@ -1,16 +1,12 @@
 # Double nodes
 
-
 import salome
 salome.salome_init()
-import GEOM
 from salome.geom import geomBuilder
 geompy = geomBuilder.New(salome.myStudy)
-
+import SMESH
-import SMESH, SALOMEDS
 from salome.smesh import smeshBuilder
 smesh =  smeshBuilder.New(salome.myStudy)
-import salome_notebook
 
 # make a mesh on a box
 box = geompy.MakeBoxDXDYDZ(100,100,100)
@@ -20,8 +16,8 @@ mesh.Quadrangle()
 mesh.Hexahedron()
 mesh.Compute()
 # copy all elements with translation
-mesh.TranslateObject( mesh, smesh.MakeDirStruct( 10,0,0), Copy=True )
+mesh.TranslateObject( mesh, [10,0,0], Copy=True )
-# create filters to find nodes equal within tolerance of 1e-5
+# create  a filter to find nodes equal within tolerance of 1e-5
 filter = smesh.GetFilter(SMESH.NODE, SMESH.FT_EqualNodes, Tolerance=1e-5)
 # get equal nodes
 print "Number of equal nodes:", len( mesh.GetIdsFromFilter( filter ))

doc/salome/examples/filters_ex18.py

@@ -1,8 +1,25 @@
 # Borders at multi-connection
 
-# create mesh
+import salome
-from SMESH_mechanic import *
+salome.salome_init()
-# get border edges with number of connected faces = 5
+from salome.geom import geomBuilder
-filter = smesh.GetFilter(SMESH.EDGE, SMESH.FT_MultiConnection, 5)
+geompy = geomBuilder.New(salome.myStudy)
+import SMESH
+from salome.smesh import smeshBuilder
+smesh =  smeshBuilder.New(salome.myStudy)
+
+# make a mesh on a box
+box = geompy.MakeBoxDXDYDZ(100,100,100)
+mesh = smesh.Mesh( box, "Box" )
+mesh.Segment().NumberOfSegments(10)
+mesh.Quadrangle()
+mesh.Hexahedron()
+mesh.Compute()
+# copy all elements with translation and merge nodes
+mesh.TranslateObject( mesh, [10,0,0], Copy=True )
+mesh.MergeNodes( mesh.FindCoincidentNodes( 1e-5 ))
+
+# get mesh edges with number of connected elements (faces and volumes) == 3
+filter = smesh.GetFilter(SMESH.EDGE, SMESH.FT_MultiConnection, 3)
 ids = mesh.GetIdsFromFilter(filter)
-print "Number of border edges with 5 faces connected:", len(ids)
+print "Number of border edges with 3 faces connected:", len(ids)

doc/salome/examples/filters_ex37.py

@@ -0,0 +1,15 @@
+# Entity type
+
+# create a mesh
+from SMESH_mechanic import *
+
+# make the mesh quadratic
+mesh.ConvertToQuadratic()
+# make some elements bi-quadratic
+for face in SubFaceL[: len(SubFaceL)/2]:
+    mesh.ConvertToQuadratic( theSubMesh=mesh.Group( face ), theToBiQuad=True )
+
+# get triangles with 7 nodes
+filter_tri = smesh.GetFilter(SMESH.FACE, SMESH.FT_EntityType,'=', SMESH.Entity_BiQuad_Triangle )
+ids_tri = mesh.GetIdsFromFilter(filter_tri)
+print "Number of bi-quadratic triangles:", len(ids_tri)

doc/salome/examples/filters_ex38.py

@@ -0,0 +1,15 @@
+# Ball diameter
+
+# create a mesh
+from SMESH_mechanic import *
+
+# create several balls with increasing diameter
+for i in range(1,10):
+    diameter = float( i )
+    mesh.AddBall( i, diameter )
+    pass
+
+# get balls with diameter > 5.
+diam_filter = smesh.GetFilter(SMESH.BALL, SMESH.FT_BallDiameter,'>', 5. )
+ids = mesh.GetIdsFromFilter( diam_filter )
+print "Number of balls with diameter > 5:", len(ids)

doc/salome/examples/filters_ex39.py

@@ -0,0 +1,45 @@
+# Elements of a domain
+
+import salome, SMESH
+salome.salome_init()
+from salome.geom import geomBuilder
+geompy = geomBuilder.New(salome.myStudy)
+from salome.smesh import smeshBuilder
+smesh =  smeshBuilder.New(salome.myStudy)
+
+# create two boxes to have two domains in the mesh
+
+box1 = geompy.MakeBoxDXDYDZ( 100,100,100 )
+box2 = geompy.MakeTranslation( box1, 200, 0, 0 )
+boxes = geompy.MakeCompound( [box1, box2] )
+box1, box2 = geompy.SubShapeAll( boxes, geompy.ShapeType["SHAPE"], "box")
+
+vertex = geompy.SubShape( box1, geompy.ShapeType["VERTEX"], [1] )
+
+# create a mesh
+
+mesh = smesh.Mesh( boxes )
+mesh.Segment(box1).NumberOfSegments( 5 )  # to have different nb of elements on the boxes
+mesh.Segment(box2).NumberOfSegments( 10 )
+mesh.Quadrangle()
+mesh.Hexahedron()
+mesh.Compute()
+
+# Create filters with FT_ConnectedElements criterion by pointing a domain in different ways:
+
+# using point coordinates in box_1
+nodeFilter = smesh.GetFilter( SMESH.NODE, SMESH.FT_ConnectedElements, "=", "1.,2,10", mesh=mesh )
+print "Nb. nodes in box_1:", len( nodeFilter.GetIDs())
+
+# using point coordinates in box_2
+edgeFilter = smesh.GetFilter( SMESH.EDGE, SMESH.FT_ConnectedElements, "=", [202,1,1 ], mesh=mesh )
+print "Nb. segments in box_2:", len( edgeFilter.GetIDs())
+
+# using a geom vertex of box_1
+faceFilter = smesh.GetFilter( SMESH.FACE, SMESH.FT_ConnectedElements, "=", vertex, mesh=mesh )
+print "Nb. faces in box_1:", len( edgeFilter.GetIDs())
+
+# using node ID in box_2
+voluFilter = smesh.GetFilter( SMESH.VOLUME, SMESH.FT_ConnectedElements, "=", 10, mesh=mesh )
+print "Nb. volumes in box_2:", len( voluFilter.GetIDs())
+

doc/salome/examples/grouping_elements_ex01.py

@@ -19,4 +19,62 @@ aGroup1 = mesh.MakeGroupByIds("Area > 100", SMESH.FACE, anIds)
 aGroup2 = mesh.CreateEmptyGroup(SMESH.NODE, "all nodes")
 aGroup2.AddFrom(mesh.mesh)
 
+
+# ====================================
+# Various methods of the Group object
+# ====================================
+
+aGroup = mesh.CreateEmptyGroup(SMESH.NODE, "aGroup")
+
+# set/get group name
+aGroup.SetName( "new name" )
+print "name", aGroup.GetName()
+
+# get group type (type of entities in the group, SMESH.NODE in our case)
+print "type", aGroup.GetType()
+
+# get number of entities (nodes in our case) in the group
+print "size", aGroup.Size()
+
+# check of emptiness
+print "is empty", aGroup.IsEmpty()
+
+# check of presence of an entity in the group
+aGroup.Add([1,2]) # method specific to the standalone group
+print "contains node 2", aGroup.Contains(2)
+
+# get an entity by index
+print "1st node", aGroup.GetID(1)
+
+# get all entities
+print "all", aGroup.GetIDs()
+
+# get number of nodes (actual for groups of elements)
+print "nb nodes", aGroup.GetNumberOfNodes()
+
+# get underlying nodes (actual for groups of elements)
+print "nodes", aGroup.GetNodeIDs()
+
+# set/get color
+import SALOMEDS
+aGroup.SetColor( SALOMEDS.Color(1.,1.,0.));
+print "color", aGroup.GetColor()
+
+# ----------------------------------------------------------------------------
+# methods specific to the standalone group and not present in GroupOnGeometry
+# and GroupOnFilter
+# ----------------------------------------------------------------------------
+
+# clear the group's contents
+aGroup.Clear()
+
+# add contents of other object (group, sub-mesh, filter)
+aGroup.AddFrom( aGroup2 )
+
+# removes entities
+aGroup.Remove( [2,3,4] )
+
+
+
+
 salome.sg.updateObjBrowser(1)

doc/salome/examples/prism_3d_algo.py

@@ -1,4 +1,4 @@
-# Use 3D extrusion meshing algorithm
+# Usage of 3D Extrusion meshing algorithm
 
 import salome
 salome.salome_init()
@@ -58,7 +58,7 @@ mesh = smesh.Mesh( prisms )
 
 # assign Global hypotheses
 
-# 1D algorithm and hypothesis for vertical division
+# 1D algorithm and hypothesis for division along the pipe
 mesh.Segment().NumberOfSegments(15)
 
 # Extrusion 3D algo

doc/salome/examples/testme.py

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

doc/salome/gui/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/SMESH/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public
@@ -30,8 +30,8 @@ SET(kernel_file "${KERNEL_ROOT_DIR}/bin/salome/prepare_generating_doc.py")
 
 SALOME_ACCUMULATE_ENVIRONMENT(SMESH_MeshersList NOCHECK ${DOC_SMESH_MeshersList})
 
-SET(_cmd_options ${smesh_file} -d -o tmp1/smeshBuilder.py StdMeshers)
+SET(_cmd_options ${smesh_file} -o tmp1/smeshBuilder.py StdMeshers)
-SALOME_GENERATE_ENVIRONMENT_SCRIPT(_cmd env_script "${PYTHON_EXECUTABLE}" "${_cmd_options}")            
+SALOME_GENERATE_ENVIRONMENT_SCRIPT(_cmd env_script "${PYTHON_EXECUTABLE}" "${_cmd_options}")
 
 ADD_CUSTOM_TARGET(usr_docs ${CMAKE_COMMAND} -E make_directory tmp1
   COMMAND ${CMAKE_COMMAND} -E make_directory tmp2

doc/salome/gui/SMESH/collect_mesh_methods.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python
 #  -*- coding: iso-8859-1 -*-
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

doc/salome/gui/SMESH/doxyfile.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/SMESH/doxyfile_py.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/gui/SMESH/input/about_filters.doc

@@ -4,11 +4,11 @@
 
 \b Filters allow picking only the mesh elements satisfying to a
 specific condition or a set of conditions. Filters can be used to create
-or edit mesh groups, remove elements from the mesh object, control
+or edit mesh groups, remove elements from the mesh, control
 mesh quality by different parameters, etc.
 
 Several criteria can be combined together by using logical operators \a
-AND and \a OR. In addition, applied filter criterion can be reverted
+AND and \a OR. In addition, a filter criterion can be reverted
 using logical operator \a NOT.
 
 Some filtering criteria use the functionality of \ref quality_page "mesh quality controls"
@@ -27,6 +27,8 @@ about selection filters and their usage in GUI.
   entities (nodes or elements) for the operations, which require the
   list of entities as input parameter (create/modify group, remove
   nodes/elements, etc) and for the operations, which accept objects
-  as input parameter. The page \ref tui_filters_page provides
+  (groups, sub-meshes) as input parameter. The page \ref
-  examples of the filters usage in Python scripts.
+  tui_filters_page provides examples of the filters usage in Python
+  scripts.
+
 */

doc/salome/gui/SMESH/input/about_meshes.doc

@@ -100,7 +100,8 @@ The mesh can include the following entities:
 Every mesh entity has an attribute associating it to a sub-shape it is
 generated on (if any). The node generated on the geometrical edge or
 surface in addition stores its position in parametric space of the
-associated geometrical entity.
+associated geometrical entity. This attribute is set up by meshing
+algorithms generating elements and nodes.
 
 Mesh entities are identified by integer IDs starting from 1.
 Nodes and elements are counted separately, i.e. there can be a node

doc/salome/gui/SMESH/input/grouping_elements.doc

@@ -13,10 +13,11 @@ There are three types of groups different by their internal
 organization:<ol>
 <li><b>Standalone group</b> is a static set of mesh entities. Its
   contents can be explicitly controlled by the user. Upon removal of
-  the entities included into the group, the group becomes empty and
+  the entities included into the group, e.g. due to modification of
-  its content can be restored only manually. Hence it is
+  meshing parameter, the group becomes empty and its content can be
-  reasonable to create standalone groups when the mesh generation is
+  restored only manually. Hence it is reasonable to create standalone
-  finished and mesh quality is verified.
+  groups when the mesh generation is finished and mesh quality is
+  verified.
   \warning Creation and edition of large standalone groups in
   \ref creating_groups_page "Create group" dialog using manual edition
   is problematic due to poor performance of the dialog.</li>
@@ -27,11 +28,11 @@ organization:<ol>
   established at group construction and cannot be changed. The group
   contents are always updated automatically, hence the
   group can be created even before mesh elements generation.</li>
-<li><b>Group on filter</b> encapsulates a filter, which is used to
+<li><b>Group on filter</b> encapsulates a \ref filters_page "filter",
-  select mesh entities composing the group from the whole
+  which is used to select mesh entities composing the group from the
-  mesh. Criteria of the filter can be changed at any time. The
+  whole mesh. Criteria of the filter can be changed at any time. The
-  group contents are always updated automatically, hence
+  group contents are always updated automatically, hence the group can
-  the group can be created even before mesh elements generation.</li>
+  be created even before mesh elements generation.</li>
 </ol>
 The group on geometry and group on filter can be converted to
 a standalone group.

doc/salome/gui/SMESH/input/prism_3d_algo.doc

@@ -41,7 +41,8 @@ The \b Global algorithms and hypotheses to be chosen at
 <li> 1D algorithm and hypothesis that will be applied for meshing
   (logically) vertical edges of the prism (which connect the top and the
   base faces of the prism). In the sample picture above these are
-  "Regular_1D" algorithm and "Nb. Segments_1" hypothesis.</li>
+  "Regular_1D" algorithm and "Nb. Segments" hypothesis named "Vertical
+  Nb. Segments".</li>
 </ul>
 
 The \b Local algorithms and hypotheses to be chosen at 
@@ -51,9 +52,9 @@ The \b Local algorithms and hypotheses to be chosen at
     meshing the top and the base prism faces. These faces can be meshed
     with any type of 2D elements: quadrangles, triangles, polygons or
     their mix. It is enough to define a sub-mesh on either the top or the base
-    face. In the sample picture above, "BLSURF" algorithm meshes
+    face. In the sample picture above, "NETGEN_1D2D" algorithm meshes
-    "Face_1" base surface with triangles. (1D algorithm is not
+    "bottom disk" face with triangles. (1D algorithm is not
-    assigned as "BLSURF" does not require divided edges to create a 2D mesh.)
+    assigned as "NETGEN_1D2D" does not require divided edges to create a 2D mesh.)
   </li>
   <li> Optionally you can define a 1D sub-mesh on some vertical edges
     of stacked prisms, which will override the global 1D hypothesis mentioned

doc/salome/gui/SMESH/input/quad_ijk_algo.doc

@@ -20,8 +20,8 @@ The algorithm treats any face as quadrangle. If a face is bound by
 more than four edges, four most sharp vertices are considered as
 corners of the quadrangle and all edges between these vertices are
 treated as quadrangle sides. In the case of three edges, the vertex
-specified by the user is considered as a degenerated side of the
+specified by the user is considered as a fourth degenerated side of the
-quadrangle. 
+quadrangle.
 
 \image html quad_meshes.png "Algorithm generates a structured mesh on complex faces provided that edges are properly discretized"
 

doc/salome/gui/SMESH/input/selection_filter_library.doc

@@ -73,7 +73,9 @@ the filtering algorithm works faster because node-to-shape association
 is used instead of measuring distance between nodes and the shape, and
 \b Tolerance is not used. If the threshold shape is any other shape,
 the algorithm works slower because distance between nodes and the
-shape is measured and is compared with \b Tolerance.
+shape is measured and is compared with \b Tolerance. The latter
+approach (distance measurement) is also used if an element is not
+associated to any shape.
 </li><li>
 <b>Lying on Geom</b> selects entities whose at least one node
 lies on the shape defined by the <b>Threshold Value</b>.
@@ -82,7 +84,9 @@ the filtering algorithm works faster because node-to-shape association
 is used instead of measuring distance between nodes and the shape, and
 \b Tolerance is not used. If the threshold shape is any other shape,
 the algorithm works slower because distance between nodes and the
-shape is measured and is compared with \b Tolerance.
+shape is measured and is compared with \b Tolerance. The latter
+approach (distance measurement) is also used if an element is not
+associated to any shape.
 </li><li>
 <b>Belong to Mesh Group</b> selects entities included into the mesh group
 defined by the <b>Threshold Value</b>.

doc/salome/gui/SMESH/input/smeshpy_interface.doc

@@ -7,49 +7,66 @@ be used for easy mesh creation and edition.
 
 Documentation for SALOME %Mesh module Python API is available in two forms:
 - <a href="smeshpy_doc/modules.html">Structured documentation</a>, where all methods and
-classes are grouped by their functionality, like it is done in the GUI documentation
+classes are grouped by their functionality.
 - <a href="smeshpy_doc/namespaces.html">Linear documentation</a> grouped only by classes, declared
 in the \ref smeshBuilder and \ref StdMeshersBuilder Python packages.
 
-\n With SALOME 7.2, the Python interface for %Mesh has been slightly modified to offer new functionality,
+\n With SALOME 7.2, the Python interface for %Mesh has been slightly modified to offer new functionality.
 \n You may have to modify your scripts generated with SALOME 6 or older versions.
-\n Please see \ref smesh_migration_page
+\n Please see \ref smesh_migration_page.
-
-The SMESH python package contains helper functions to manipulate mesh elements and 
-interact with these elements.
-
-Note that these functions either encapsulate the python programming interface of SMESH core 
-(the CORBA or SWIG interface for example) or extend existing utilities as the smesh.py module.
-
-The functions are distributed in the python package \b salome.smesh.
-
-\note
-The main package \b salome contains other sub-packages that are distributed with the other 
-SALOME modules. For example, the KERNEL module provides the python package \b salome.kernel 
-and GEOM the package \b salome.geom.
 
 Class \ref smeshBuilder.smeshBuilder "smeshBuilder" provides an interface to create and handle
 meshes. It can be used to create an empty mesh or to import mesh from the data file.
 
-Class \ref smeshstudytools.SMeshStudyTools "SMeshStudyTools" provides several methods to manipulate mesh objects in Salome study. 
-
 As soon as mesh is created, it is possible to manage it via its own
 methods, described in class \ref smeshBuilder.Mesh "Mesh" documentation.
 
-Class \ref smeshBuilder.Mesh "Mesh" allows assigning algorithms to a mesh.
+Class \ref smeshstudytools.SMeshStudyTools "SMeshStudyTools" provides several methods to manipulate mesh objects in Salome study. 
-Please note that some algorithms, included in the standard SALOME
-distribution are always available. Python package \ref StdMeshersBuilder "StdMeshersBuilder"
-provides an interface for standard meshing algorithms included into
-the SALOME %Mesh module distribution, like:
-- REGULAR (1D)
-- COMPOSITE (1D)
-- MEFISTO (2D)
-- Quadrangle (2D)
-- Hexa(3D)
-- etc ...
 
-To add meshing hypotheses, it is possible to use the functions provided by the
+A usual workflow to generate a mesh on geometry is following:
-algorithms interfaces.
+<ol>
+  <li>Create an instance of \ref smeshBuilder.smeshBuilder "smeshBuilder":
+    <pre>
+      from salome.smesh import smeshBuilder
+      smesh = smeshBuilder.New( salome.myStudy )
+    </pre></li>
+  <li>Create a \ref smeshBuilder.Mesh "mesh" object:
+    <pre>
+      mesh = \ref smeshBuilder.smeshBuilder.Mesh "smesh.Mesh( geometry )" 
+    </pre></li>
+  <li> Create and assign \ref basic_meshing_algos_page "algorithms" by
+  calling corresponding methods of the mesh. If a sub-shape is
+  provided as an argument, a \ref constructing_submeshes_page "sub-mesh"
+  is implicitly created on this sub-shape:
+    <pre>
+      regular1D = \ref smeshBuilder.Mesh.Segment "mesh.Segment"()
+      mefisto   = \ref smeshBuilder.Mesh.Triangle "mesh.Triangle"( smeshBuilder.MEFISTO )
+      # use other triangle algorithm on a face -- a sub-mesh appears in the mesh
+      netgen    = \ref smeshBuilder.Mesh.Triangle "mesh.Triangle"( smeshBuilder.NETGEN_1D2D, face )
+    </pre></li>
+  <li> Create and assign \ref about_hypo_page "hypotheses" by calling
+  corresponding methods of algorithms:
+    <pre>
+      segLen10 = \ref StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength "regular1D.LocalLength"( 10. )
+      maxArea  = \ref StdMeshersBuilder.StdMeshersBuilder_Segment.LocalLength "mefisto.MaxElementArea"( 100. )
+      netgen.SetMaxSize( 20. )
+      netgen.SetFineness( smeshBuilder.VeryCoarse )
+    </pre>
+  </li>
+  <li> \ref compute_anchor "Compute" the mesh (generate mesh nodes and elements):
+    <pre>
+      \ref Mesh.Compute "mesh.Compute"()
+    </pre>
+    </li>
+</ol>
+
+An easiest way to start with Python scripting is to do something in
+GUI and then to get a corresponding Python script via 
+<b> File > Dump Study </b> menu item. Don't forget that you can get
+all methods of any object in hand (e.g. a mesh group or a hypothesis)
+by calling \a dir() Python built-in function.
+
+All methods of the Mesh Group can be found in \ref tui_create_standalone_group sample script.
 
 An example below demonstrates usage of the Python API for 3d mesh generation. 
 
@@ -61,19 +78,19 @@ Examples of Python scripts for Mesh operations are available by
 the following links:
 
 - \subpage tui_creating_meshes_page
-- \subpage tui_cartesian_algo
-- \subpage tui_use_existing_faces
-- \subpage tui_viewing_meshes_page
 - \subpage tui_defining_hypotheses_page
-- \subpage tui_quality_controls_page
-- \subpage tui_filters_page
 - \subpage tui_grouping_elements_page
+- \subpage tui_filters_page
 - \subpage tui_modifying_meshes_page
 - \subpage tui_transforming_meshes_page
-- \subpage tui_notebook_smesh_page
+- \subpage tui_viewing_meshes_page
+- \subpage tui_quality_controls_page
 - \subpage tui_measurements_page
-- \subpage tui_generate_flat_elements_page
 - \subpage tui_work_on_objects_from_gui
+- \subpage tui_notebook_smesh_page
+- \subpage tui_cartesian_algo
+- \subpage tui_use_existing_faces
 - \subpage tui_prism_3d_algo
+- \subpage tui_generate_flat_elements_page
 
 */

doc/salome/gui/SMESH/input/tui_creating_meshes.doc

@@ -2,54 +2,50 @@
 
 \page tui_creating_meshes_page Creating Meshes
 
+\tableofcontents
+
 \n First of all see \ref example_3d_mesh "Example of 3d mesh generation",
  which is an example of good python script style for Mesh module.
 
 <br>
-<h2>Construction of a Mesh</h2>
+\section construction_of_a_mesh Construction of a mesh
 \tui_script{creating_meshes_ex01.py}
 
 <br>
-\anchor tui_construction_submesh
+\section tui_construction_submesh Construction of a sub-mesh
-<h2>Construction of a Submesh</h2>
 \tui_script{creating_meshes_ex02.py}
 
 <br>
-<h2>Change priority of submeshes in Mesh</h2>
+\section change_priority_of_submeshes_in_mesh Change priority of sub-meshes in mesh
 \tui_script{creating_meshes_ex03.py}
 
 <br>
-\anchor tui_editing_while_meshing
+\section tui_editing_while_meshing Intermediate edition while meshing
-<h2>Intermediate edition while meshing</h2>
 \tui_script{a3DmeshOnModified2Dmesh.py}
 
 <br>
-\anchor tui_editing_mesh
+\section tui_editing_mesh Editing a mesh
-<h2>Editing a mesh</h2>
 \tui_script{creating_meshes_ex04.py}
 
 <br>
-\anchor tui_export_mesh
+\section tui_export_mesh Export of a Mesh
-<h2>Export of a Mesh</h2>
 \tui_script{creating_meshes_ex05.py}
 
 <br>
-<h2>How to mesh a cylinder with hexahedrons?</h2>
+\section how_to_mesh_a_cylinder_with_hexahedrons How to mesh a cylinder with hexahedrons?
 Here you can see an example of python script, creating a hexahedral
-mesh on a cylinder. And a picture below the source code of the script,
+mesh on a cylinder. A picture below the source code of the script
-demonstrating the resulting mesh.
+demonstrates the resulting mesh.
 \tui_script{creating_meshes_ex06.py}
 
 \image html mesh_cylinder_hexa.png
 
 <br>
-\anchor tui_building_compound
+\section tui_building_compound Building a compound of meshes
-<h2>Building a compound of meshes</h2>
 \tui_script{creating_meshes_ex07.py}
 
 <br>
-\anchor tui_copy_mesh
+\section tui_copy_mesh Mesh Copying
-<h2>Mesh Copying</h2>
 \tui_script{creating_meshes_ex08.py}
 
 */

doc/salome/gui/SMESH/input/tui_filters.doc

@@ -6,7 +6,7 @@
 
 Filters allow picking only the mesh elements satisfying to a
 specific condition or a set of conditions. Filters can be used to create
-or edit mesh groups, remove elements from the mesh object, control
+or edit mesh groups, remove elements from the mesh, control
 mesh quality by different parameters, etc.
 
 Several filtering criteria can be combined together by using logical
@@ -24,7 +24,7 @@ Python scripts.
 
 \section filter_aspect_ratio Aspect ratio
 
-Filter 2D mesh elements (faces) according to the aspect ratio value:
+filters 2D mesh elements (faces) according to the aspect ratio value:
 - element type should be \a SMESH.FACE
 - functor type should be \a SMESH.FT_AspectRatio
 - threshold is floating point value (aspect ratio)
@@ -35,7 +35,7 @@ Filter 2D mesh elements (faces) according to the aspect ratio value:
 
 \section filter_aspect_ratio_3d Aspect ratio 3D
 
-Filter 3D mesh elements (volumes) according to the aspect ratio value:
+filters 3D mesh elements (volumes) according to the aspect ratio value:
 - element type is \a SMESH.VOLUME
 - functor type is \a SMESH.FT_AspectRatio3D
 - threshold is floating point value (aspect ratio)
@@ -46,7 +46,7 @@ Filter 3D mesh elements (volumes) according to the aspect ratio value:
 
 \section filter_warping_angle Warping angle
 
-Filter 2D mesh elements (faces) according to the warping angle value:
+filters 2D mesh elements (faces) according to the warping angle value:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_Warping
 - threshold is floating point value (warping angle)
@@ -57,7 +57,7 @@ Filter 2D mesh elements (faces) according to the warping angle value:
 
 \section filter_minimum_angle Minimum angle
 
-Filter 2D mesh elements (faces) according to the minimum angle value:
+filters 2D mesh elements (faces) according to the minimum angle value:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_MinimumAngle
 - threshold is floating point value (minimum angle)
@@ -68,7 +68,7 @@ Filter 2D mesh elements (faces) according to the minimum angle value:
 
 \section filter_taper Taper
 
-Filter 2D mesh elements (faces) according to the taper value:
+filters 2D mesh elements (faces) according to the taper value:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_Taper
 - threshold is floating point value (taper)
@@ -79,7 +79,7 @@ Filter 2D mesh elements (faces) according to the taper value:
 
 \section filter_skew Skew
 
-Filter 2D mesh elements (faces) according to the skew value:
+filters 2D mesh elements (faces) according to the skew value:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_Skew
 - threshold is floating point value (skew)
@@ -90,7 +90,7 @@ Filter 2D mesh elements (faces) according to the skew value:
 
 \section filter_area Area
 
-Filter 2D mesh elements (faces) according to the area value:
+filters 2D mesh elements (faces) according to the area value:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_Area
 - threshold is floating point value (area)
@@ -101,7 +101,7 @@ Filter 2D mesh elements (faces) according to the area value:
 
 \section filter_volume Volume
 
-Filter 3D mesh elements (volumes) according to the volume value:
+filters 3D mesh elements (volumes) according to the volume value:
 - element type is \a SMESH.VOLUME
 - functor type is \a SMESH.FT_Volume3D
 - threshold is floating point value (volume)
@@ -112,7 +112,7 @@ Filter 3D mesh elements (volumes) according to the volume value:
 
 \section filter_free_borders Free borders
 
-Filter 1D mesh elements (edges) which represent free borders of a mesh:
+filters 1D mesh elements (edges) which represent free borders of a mesh:
 - element type is \a SMESH.EDGE
 - functor type is \a SMESH.FT_FreeBorders
 - threshold value is not required
@@ -123,8 +123,8 @@ Filter 1D mesh elements (edges) which represent free borders of a mesh:
 
 \section filter_free_edges Free edges
 
-Filter 2D mesh elements (faces) consisting of edges belonging to one
+filters 2D mesh elements (faces) having edges (i.e. links between
-element of mesh only:
+nodes, not mesh segments) belonging to one face of mesh only:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_FreeEdges
 - threshold value is not required
@@ -135,7 +135,7 @@ element of mesh only:
 
 \section filter_free_nodes Free nodes
 
-Filter free nodes:
+filters free nodes:
 - element type is \a SMESH.NODE
 - functor type is \a SMESH.FT_FreeNodes
 - threshold value is not required
@@ -146,7 +146,7 @@ Filter free nodes:
 
 \section filter_free_faces Free faces
 
-Filter free faces:
+filters free faces:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_FreeFaces
 - threshold value is not required
@@ -157,7 +157,7 @@ Filter free faces:
 
 \section filter_bare_border_faces Bare border faces
 
-Filter faces with bare borders:
+filters faces with bare borders:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_BareBorderFace
 - threshold value is not required
@@ -168,7 +168,7 @@ Filter faces with bare borders:
 
 \section filter_coplanar_faces Coplanar faces
 
-Filter faces with bare borders:
+filters coplanar faces:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_CoplanarFaces
 - threshold value is the face ID
@@ -178,7 +178,7 @@ Filter faces with bare borders:
 
 \section filter_over_constrained_faces Over-constrained faces
 
-Filter over-constrained faces:
+filters over-constrained faces:
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_OverConstrainedFace
 - threshold value is not required
@@ -189,7 +189,7 @@ Filter over-constrained faces:
 
 \section filter_double_elements Double edges, Double faces, Double volumes
 
-filter mesh elements basing on the same set of nodes:
+filters mesh elements basing on the same set of nodes:
 - element type is either \a SMESH.EGDE, \a SMESH.FACE or \a SMESH.VOLUME
 - functor type is either \a SMESH.FT_EqualEdges, \a
           SMESH.FT_EqualFaces or \a SMESH.FT_EqualVolumes,
@@ -211,8 +211,8 @@ filters mesh nodes which are coincident with other nodes (within a given toleran
 
 \section filter_borders_multiconnection Borders at multi-connection
 
-Filter border 1D mesh elements (edges) according to the specified number of
+filters 1D mesh elements (segments) according to the specified number of
-connections (faces belonging the border edges)
+connections (faces and volumes on whose border the segment lies):
 - element type is \a SMESH.EDGE
 - functor type is \a SMESH.FT_MultiConnection
 - threshold is integer value (number of connections)
@@ -223,8 +223,8 @@ connections (faces belonging the border edges)
 
 \section filter_borders_multiconnection_2d Borders at multi-connection 2D
 
-Filter 2D mesh elements (faces) which consist of edges belonging
+filters 2D mesh elements (faces) with the specified maximal number of
-to the specified number of mesh elements
+faces connected to a border (link between nodes, not mesh segment):
 - element type is \a SMESH.FACE
 - functor type is \a SMESH.FT_MultiConnection2D
 - threshold is integer value (number of connections)
@@ -235,7 +235,7 @@ to the specified number of mesh elements
 
 \section filter_length Length
 
-Filter 1D mesh elements (edges) according to the edge length value:
+filters 1D mesh elements (edges) according to the edge length value:
 - element type should be \a SMESH.EDGE
 - functor type should be \a SMESH.FT_Length
 - threshold is floating point value (length)
@@ -246,8 +246,8 @@ Filter 1D mesh elements (edges) according to the edge length value:
 
 \section filter_length_2d Length 2D
 
-Filter 2D mesh elements (faces) corresponding to the maximum length.
+filters 2D mesh elements (faces) according to the maximum length of its
-value of its edges:
+edges (links between nodes):
 - element type should be \a SMESH.FACE
 - functor type should be \a SMESH.FT_Length2D
 - threshold is floating point value (edge length)
@@ -258,11 +258,11 @@ value of its edges:
 
 \section filter_max_element_length_2d Element Diameter 2D
 
-Filter 2D mesh elements (faces) corresponding to the maximum length
+filters 2D mesh elements (faces) according to the maximum length
-value of its edges and diagonals:
+of its edges and diagonals:
 - element type should be \a SMESH.FACE
 - functor type should be \a SMESH.FT_MaxElementLength2D
-- threshold is floating point value (edge/diagonal length)
+- threshold is floating point value (length)
 
 \tui_script{filters_ex22.py}
 
@@ -270,8 +270,8 @@ value of its edges and diagonals:
 
 \section filter_max_element_length_3d Element Diameter 3D
 
-Filter 3D mesh elements (volumes) corresponding to the maximum length
+filters 3D mesh elements (volumes) according to the maximum length
-value of its edges and diagonals:
+of its edges and diagonals:
 - element type should be \a SMESH.VOLUME
 - functor type should be \a SMESH.FT_MaxElementLength3D
 - threshold is floating point value (edge/diagonal length)
@@ -282,7 +282,8 @@ value of its edges and diagonals:
 
 \section filter_bare_border_volumes Bare border volumes
 
-Filter 3D mesh elements with bare borders:
+filters 3D mesh elements with bare borders, i.e. having a facet not
+shared with other volumes and without a face on it:
 - element type is \a SMESH.VOLUME
 - functor type is \a SMESH.FT_BareBorderVolume
 - threshold value is not required
@@ -293,7 +294,7 @@ Filter 3D mesh elements with bare borders:
 
 \section filter_over_constrained_volumes Over-constrained volumes
 
-Filter over-constrained volumes:
+filters over-constrained volumes, whose all nodes are on the mesh boundary:
 - element type is \a SMESH.VOLUME
 - functor type is \a SMESH.FT_OverConstrainedVolume
 - threshold value is not required
@@ -304,9 +305,9 @@ Filter over-constrained volumes:
 
 \section filter_belong_to_group Belong to Mesh Group
 
-Filter mesh entities (nodes or elements) included in a mesh group
+filters mesh entities (nodes or elements) included in a mesh group
 defined by threshold value:
-- element type can be any entity type, from \a  SMESH.NODE to \a SMESH.VOLUME
+- element type can be any, from \a  SMESH.NODE to \a SMESH.BALL
 - functor type should be \a SMESH.FT_BelongToMeshGroup
 - threshold is mesh group object
 
@@ -314,29 +315,33 @@ defined by threshold value:
 
 \section filter_belong_to_geom Belong to Geom
 
-Filter mesh entities (nodes or elements) which all nodes lie on the
+filters mesh entities (nodes or elements) which all nodes lie on the
 shape defined by threshold value:
-- element type can be any entity type, from \a  SMESH.NODE to \a SMESH.VOLUME
+- element type can be any, from \a  SMESH.NODE to \a SMESH.BALL
 - functor type should be \a SMESH.FT_BelongToGeom
 - threshold is geometrical object
+- tolerance is a distance between a node and the geometrical object;
+it is used if an node is not associated to any geometry.
 
 \tui_script{filters_ex26.py}
 
 \section filter_lying_on_geom Lying on Geom
 
-Filter mesh entities (nodes or elements) at least one node of which lies on the
+filters mesh entities (nodes or elements) at least one node of which lies on the
 shape defined by threshold value:
-- element type can be any entity type, from \a  SMESH.NODE to \a SMESH.VOLUME
+- element type can be any, from \a  SMESH.NODE to \a SMESH.BALL
 - functor type should be \a SMESH.FT_LyingOnGeom
 - threshold is geometrical object
+- tolerance is a distance between a node and the geometrical object;
+it is used if an node is not associated to any geometry.
 
 \tui_script{filters_ex27.py}
 
 \section filter_belong_to_plane Belong to Plane
 
-Filter mesh entities (nodes or elements) which all nodes belong to the
+filters mesh entities (nodes or elements) which all nodes belong to the
 plane defined by threshold value with the given tolerance:
-- element type can be: \a  SMESH.NODE, \a SMESH.EDGE, \a SMESH.FACE
+- element type can be any except \a  SMESH.VOLUME
 - functor type should be \a SMESH.FT_BelongToPlane
 - threshold is geometrical object (plane)
 - default tolerance is 1.0e-7
@@ -345,9 +350,9 @@ plane defined by threshold value with the given tolerance:
 
 \section filter_belong_to_cylinder Belong to Cylinder
 
-Filter mesh entities (nodes or elements) which all nodes belong to the
+filters mesh entities (nodes or elements) which all nodes belong to the
 cylindrical face defined by threshold value with the given tolerance:
-- element type can be: \a , \a SMESH.EDGE, \a SMESH.FACE
+- element type can be any except \a  SMESH.VOLUME
 - functor type should be \a SMESH.FT_BelongToCylinder
 - threshold is geometrical object (cylindrical face)
 - default tolerance is 1.0e-7
@@ -356,9 +361,9 @@ cylindrical face defined by threshold value with the given tolerance:
 
 \section filter_belong_to_surface Belong to Surface
 
-Filter mesh entities (nodes or elements) which all nodes belong to the
+filters mesh entities (nodes or elements) which all nodes belong to the
 arbitrary surface defined by threshold value with the given tolerance:
-- element type can be: \a  SMESH.NODE, \a SMESH.EDGE, \a SMESH.FACE
+- element type can be any except \a  SMESH.VOLUME
 - functor type should be \a SMESH.FT_BelongToGenSurface
 - threshold is geometrical object (arbitrary surface)
 - default tolerance is 1.0e-7
@@ -367,9 +372,9 @@ arbitrary surface defined by threshold value with the given tolerance:
 
 \section filter_range_of_ids Range of IDs
 
-Filter mesh entities elements (nodes or elements) according to the
+filters mesh entities elements (nodes or elements) according to the
 specified identifiers range:
-- element type can be any entity type, from \a  SMESH.NODE to \a SMESH.VOLUME
+- element type can be any, from \a  SMESH.NODE to \a SMESH.BALL
 - functor type is \a SMESH.FT_RangeOfIds
 - threshold is string listing required IDs and/or ranges of IDs, e.g."1,2,3,50-60,63,67,70-78"	
 
@@ -377,7 +382,7 @@ specified identifiers range:
 
 \section filter_bad_oriented_volume Badly oriented volume
 
-Filter 3D mesh elements (volumes), which are incorrectly oriented from
+filters 3D mesh elements (volumes), which are incorrectly oriented from
 the point of view of MED convention. 
 - element type should be \a SMESH.VOLUME
 - functor type is \a SMESH.FT_BadOrientedVolume
@@ -387,8 +392,8 @@ the point of view of MED convention.
 
 \section filter_linear_or_quadratic Linear / quadratic
 
-Filter linear / quadratic mesh elements:
+filters linear / quadratic mesh elements:
-- element type should be any element type, e.g.: \a SMESH.EDGE, \a SMESH.FACE, \a SMESH.VOLUME
+- element type should be either \a SMESH.EDGE, \a SMESH.FACE or \a SMESH.VOLUME
 - functor type is \a SMESH.FT_LinearOrQuadratic
 - threshold is not required
 - if unary operator is set to SMESH.FT_LogicalNOT, the quadratic
@@ -398,8 +403,8 @@ elements are selected, otherwise (by default) linear elements are selected
 
 \section filter_group_color Group color
 
-Filter mesh entities, belonging to the group with the color defined by the threshold value.
+filters mesh entities, belonging to the group with the color defined by the threshold value.
-- element type can be any entity type, from \a  SMESH.NODE to \a SMESH.VOLUME
+- element type can be any, from \a  SMESH.NODE to \a SMESH.BALL
 - functor type is \a SMESH.FT_GroupColor
 - threshold should be of SALOMEDS.Color type
 
@@ -407,15 +412,42 @@ Filter mesh entities, belonging to the group with the color defined by the thres
 
 \section filter_geom_type Geometry type
 
-Filter mesh elements by the geometric type defined with the threshold
+filters mesh elements by the geometric type defined with the threshold
 value. The list of available geometric types depends on the element
 entity type.
-- element type should be any element type, e.g.: \a SMESH.EDGE, \a SMESH.FACE, \a SMESH.VOLUME
+- element type can be any, e.g.: \a SMESH.EDGE, \a SMESH.FACE, \a SMESH.VOLUME, etc.
 - functor type should be \a SMESH.FT_ElemGeomType
-- threshold is of smesh.GeometryType value
+- threshold is either of smesh.GeometryType values. Type \a SMESH.GeometryType._items in the Python Console to see all geometric types.
 
 \tui_script{filters_ex35.py}
 
+\section filter_entity_type Entity type
+
+filters mesh elements by the geometric type and number of nodes. 
+- element type can be any, e.g.: \a SMESH.EDGE, \a SMESH.FACE, \a SMESH.VOLUME, etc.
+- functor type should be \a SMESH.FT_EntityType
+- threshold is either of SMESH.EntityType values. Type \a SMESH.EntityType._items in the Python Console to see all entity types.
+
+\tui_script{filters_ex37.py}
+
+\section filter_ball_diam Ball diameter
+
+filters ball elements by diameter. 
+- element type should be \a SMESH.BALL
+- functor type should be \a SMESH.FT_BallDiameter
+- threshold is floating point value (ball diameter)
+
+\tui_script{filters_ex38.py}
+
+\section filter_domain Elements of a domain
+
+filters elements of a specified domain. 
+- element type can be any, e.g.: \a SMESH.EDGE, \a SMESH.FACE, \a SMESH.VOLUME, etc.
+- functor type should be \a SMESH.FT_ConnectedElements
+- threshold is either (1) node ID or (2)  geometrical vertex or (3) 3 coordinates of a point.
+
+\tui_script{filters_ex39.py}
+
 \section combining_filters How to combine several criteria into a filter?
 
 Several criteria can be combined into a filter.

doc/salome/gui/SMESH/input/tui_grouping_elements.doc

@@ -2,27 +2,24 @@
 
 \page tui_grouping_elements_page Grouping Elements
 
+\tableofcontents
+
 <br>
-\anchor tui_create_standalone_group
+\section tui_create_standalone_group Create a Standalone Group
-<h2>Create a Standalone Group</h2>
 \tui_script{grouping_elements_ex01.py}
 
 \image html create_group.png
 
 <br>
-\anchor tui_create_group_on_geometry
+\section tui_create_group_on_geometry Create a Group on Geometry
-<h2>Create a Group on Geometry</h2>
 \tui_script{grouping_elements_ex02.py}
 
 <br>
-\anchor tui_create_group_on_filter
+\section tui_create_group_on_filter Create a Group on Filter
-
-<h2>Create a Group on Filter</h2>
 \tui_script{grouping_elements_ex03.py}
 
 <br>
-\anchor tui_edit_group
+\section tui_edit_group Edit a Group
-<h2>Edit a Group</h2>
 \tui_script{grouping_elements_ex04.py}
 
 \image html editing_groups1.png
@@ -30,8 +27,7 @@
 \image html editing_groups2.png
 
 <br>
-\anchor tui_union_of_groups
+\section tui_union_of_groups Union of groups
-<h2>Union of groups</h2>
 \tui_script{grouping_elements_ex05.py}
 
 \image html union_groups1.png
@@ -41,8 +37,7 @@
 \image html union_groups3.png
 
 <br>
-\anchor tui_intersection_of_groups
+\section tui_intersection_of_groups Intersection of groups
-<h2>Intersection of groups</h2>
 \tui_script{grouping_elements_ex06.py}
 
 \image html intersect_groups1.png
@@ -52,8 +47,7 @@
 \image html intersect_groups3.png
 
 <br>
-\anchor tui_cut_of_groups
+\section tui_cut_of_groups Cut of groups
-<h2>Cut of groups</h2>
 \tui_script{grouping_elements_ex07.py}
 
 \image html cut_groups1.png
@@ -63,8 +57,7 @@
 \image html cut_groups3.png
 
 <br>
-\anchor tui_create_dim_group
+\section tui_create_dim_group Creating groups of entities from existing groups of superior dimensions
-<h2>Creating groups of entities from existing groups of superior dimensions</h2>
 \tui_script{grouping_elements_ex08.py}
 
 \image html dimgroup_tui1.png

doc/salome/gui/SMESH/input/tui_modifying_meshes.doc

@@ -2,9 +2,10 @@
 
 \page tui_modifying_meshes_page Modifying Meshes
 
+\tableofcontents
+
 <br>
-\anchor tui_adding_nodes_and_elements
+\section tui_adding_nodes_and_elements Adding Nodes and Elements
-<h2>Adding Nodes and Elements</h2>
 
 <br>
 \anchor tui_add_node
@@ -57,8 +58,7 @@
 \tui_script{modifying_meshes_ex10.py}
 
 <br>
-\anchor tui_removing_nodes_and_elements
+\section tui_removing_nodes_and_elements Removing Nodes and Elements
-<h2>Removing Nodes and Elements</h2>
 
 <br>
 \anchor tui_removing_nodes
@@ -76,73 +76,59 @@
 \tui_script{modifying_meshes_ex13.py}
 
 <br>
-\anchor tui_renumbering_nodes_and_elements
+\section tui_renumbering_nodes_and_elements Renumbering Nodes and Elements
-<h2>Renumbering Nodes and Elements</h2>
 \tui_script{modifying_meshes_ex14.py}
 
 <br>
-\anchor tui_moving_nodes
+\section tui_moving_nodes Moving Nodes
-<h2>Moving Nodes</h2>
 \tui_script{modifying_meshes_ex15.py}
 
 <br>
-\anchor tui_diagonal_inversion
+\section tui_diagonal_inversion Diagonal Inversion
-<h2>Diagonal Inversion</h2>
 \tui_script{modifying_meshes_ex16.py}
 
 <br>
-\anchor tui_uniting_two_triangles
+\section tui_uniting_two_triangles Uniting two Triangles
-<h2>Uniting two Triangles</h2>
 \tui_script{modifying_meshes_ex17.py}
 
 <br>
-\anchor tui_uniting_set_of_triangles
+\section tui_uniting_set_of_triangles Uniting a Set of Triangles
-<h2>Uniting a Set of Triangles</h2>
 \tui_script{modifying_meshes_ex18.py}
 
 <br>
-\anchor tui_orientation
+\section tui_orientation Orientation
-<h2>Orientation</h2>
 \tui_script{modifying_meshes_ex19.py}
 
 <br>
-\anchor tui_cutting_quadrangles
+\section tui_cutting_quadrangles Cutting Quadrangles
-<h2>Cutting Quadrangles</h2>
 \tui_script{modifying_meshes_ex20.py}
 
 <br>
-\anchor tui_smoothing
+\section tui_smoothing Smoothing
-<h2>Smoothing</h2>
 \tui_script{modifying_meshes_ex21.py}
 
 <br>
-\anchor tui_extrusion
+\section tui_extrusion Extrusion
-<h2>Extrusion</h2>
 \tui_script{modifying_meshes_ex22.py}
 
 <br>
-\anchor tui_extrusion_along_path
+\section tui_extrusion_along_path Extrusion along a Path
-<h2>Extrusion along a Path</h2>
 \tui_script{modifying_meshes_ex23.py}
 
 <br>
-\anchor tui_revolution
+\section tui_revolution Revolution
-<h2>Revolution</h2>
 \tui_script{modifying_meshes_ex24.py}
 
 <br>
-\anchor tui_pattern_mapping
+\section tui_pattern_mapping Pattern Mapping
-<h2>Pattern Mapping</h2>
 \tui_script{modifying_meshes_ex25.py}
 
 <br>
-\anchor tui_quadratic
+\section tui_quadratic Convert mesh to/from quadratic
-<h2>Convert mesh to/from quadratic</h2>
 \tui_script{modifying_meshes_ex26.py}
 
 <br>
-\anchor tui_split_biquad
+\section tui_split_biquad Split bi-quadratic into linear
-<h2>Split bi-quadratic into linear</h2>
 \tui_script{split_biquad.py}
 
 */

doc/salome/gui/SMESH/input/tui_quality_controls.doc

@@ -2,6 +2,8 @@
 
 \page tui_quality_controls_page Quality Controls
 
+\tableofcontents
+
 \section tui_free_borders Free Borders
 \tui_script{quality_controls_ex01.py}
 

doc/salome/gui/SMESH/input/tui_transforming_meshes.doc

@@ -2,73 +2,58 @@
 
 \page tui_transforming_meshes_page Transforming Meshes
 
-<br><h2>Transforming Meshes</h2>
+\tableofcontents
 
 <br>
-\anchor tui_translation
+\section tui_translation Translation
-<h3>Translation</h3>
 \tui_script{transforming_meshes_ex01.py}
 
 <br>
-\anchor tui_rotation
+\section tui_rotation Rotation
-<h3>Rotation</h3>
 \tui_script{transforming_meshes_ex02.py}
 
 <br>
-\anchor tui_scale
+\section tui_scale Scale
-<h3>Scale</h3>
 \tui_script{transforming_meshes_ex03.py}
 
 <br>
-\anchor tui_symmetry
+\section tui_symmetry Symmetry
-<h3>Symmetry</h3>
 \tui_script{transforming_meshes_ex04.py}
 
 <br>
-\anchor tui_merging_nodes
+\section tui_merging_nodes Merging Nodes
-<h3>Merging Nodes</h3>
 \tui_script{transforming_meshes_ex05.py}
 
 <br>
-\anchor tui_merging_elements
+\section tui_merging_elements Merging Elements
-<h3>Merging Elements</h3>
 \tui_script{transforming_meshes_ex06.py}
 
-<br><h2>Sewing Meshes</h2>
-
 <br>
-\anchor tui_sew_meshes_border_to_side
+\section tui_sew_meshes_border_to_side Sew Meshes Border to Side
-<h3>Sew Meshes Border to Side</h3>
 \tui_script{transforming_meshes_ex07.py}
 
 <br>
-\anchor tui_sew_conform_free_borders
+\section tui_sew_conform_free_borders Sew Conform Free Borders
-<h3>Sew Conform Free Borders</h3>
 \tui_script{transforming_meshes_ex08.py}
 
 <br>
-\anchor tui_sew_free_borders
+\section tui_sew_free_borders Sew Free Borders
-<h3>Sew Free Borders</h3>
 \tui_script{transforming_meshes_ex09.py}
 
 <br>
-\anchor tui_sew_side_elements
+\section tui_sew_side_elements Sew Side Elements
-<h3>Sew Side Elements</h3>
 \tui_script{transforming_meshes_ex10.py}
 
 <br>
-\anchor tui_duplicate_nodes
+\section tui_duplicate_nodes Duplicate nodes or/and elements
-<h3>Duplicate nodes or/and elements</h3>
 \tui_script{transforming_meshes_ex11.py}
 
 <br>
-\anchor tui_make_2dmesh_from_3d
+\section tui_make_2dmesh_from_3d Create boundary elements
-<h3>Create boundary elements</h3>
 \tui_script{transforming_meshes_ex12.py}
 
 <br>
-\anchor tui_reorient_faces
+\section tui_reorient_faces Reorient faces
-<h3>Reorient faces</h3>
 \tui_script{transforming_meshes_ex13.py}
 
 */

doc/salome/gui/SMESH/input/tui_work_on_objects_from_gui.doc

@@ -6,7 +6,7 @@ It is sometimes useful to work alternatively in the GUI of SALOME and in the Pyt
 
 \code
 myMesh_ref = salome.IDToObject("ID")  
-// were ID is the number that appears in the object browser in the Entry column 
+// were ID is the string looking like "0:1:2:3" that appears in the object browser in the Entry column 
 // ( If hidden show it by right clicking and checking the checkbox Entry)
 myMesh = smesh.Mesh(myMesh_ref)
 \endcode

doc/salome/gui/SMESH/static/footer.html

@@ -4,7 +4,7 @@
   <ul>
     $navpath
     <li class="footer">
-      Copyright &copy; 2007-2015  CEA/DEN, EDF R&amp;D, OPEN CASCADE<br>
+      Copyright &copy; 2007-2016  CEA/DEN, EDF R&amp;D, OPEN CASCADE<br>
       Copyright &copy; 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT, EDF R&amp;D, LEG, PRINCIPIA R&amp;D, BUREAU VERITAS<br>
     </li>
   </ul>

doc/salome/tui/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/tui/doxyfile.in

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

doc/salome/tui/static/footer.html

@@ -4,7 +4,7 @@
   <ul>
     $navpath
     <li class="footer">
-      Copyright &copy; 2007-2015  CEA/DEN, EDF R&amp;D, OPEN CASCADE<br>
+      Copyright &copy; 2007-2016  CEA/DEN, EDF R&amp;D, OPEN CASCADE<br>
       Copyright &copy; 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN, CEDRAT, EDF R&amp;D, LEG, PRINCIPIA R&amp;D, BUREAU VERITAS<br>
     </li>
   </ul>

idl/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

idl/SMESH_BasicHypothesis.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Filter.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Gen.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Group.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -74,7 +74,7 @@ module SMESH
     boolean Contains( in long elem_id );
 
     /*!
-     * Returns ID of an element at position <elem_index>
+     * Returns ID of an element at position <elem_index> counted from 1
      */
     long GetID( in long elem_index );
 

idl/SMESH_Hypothesis.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Measurements.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Mesh.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_MeshEditor.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

idl/SMESH_Pattern.idl

@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

resources/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 # CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

resources/SMESHCatalog.xml.in

@@ -1,6 +1,6 @@
 <?xml version='1.0' encoding='us-ascii' ?>
 <!--
-  Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

resources/SalomeApp.xml.in

@@ -1,5 +1,5 @@
 <!--
-  Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -122,6 +122,7 @@
     <parameter name="Plug-ins/MGCleaner plugin User's Guide" value="%SMESH_ROOT_DIR%/share/doc/salome/gui/SMESH/MGCleaner/index.html"/>
     <parameter name="Plug-ins/Z-cracks plugin User's Guide" value="%SMESH_ROOT_DIR%/share/doc/salome/gui/SMESH/zcracks/index.html"/>
     <parameter name="Plug-ins/MacMesh plugin" value="%SMESH_ROOT_DIR%/share/doc/salome/gui/SMESH/MacMesh/index.html"/>
+    <parameter name="Plug-ins/plugin blocFissure" value="%SMESH_ROOT_DIR%/share/doc/salome/gui/SMESH/blocFissure/index.html"/>
     <parameter name="Developer's Guide" value="%SMESH_ROOT_DIR%/share/doc/salome/tui/SMESH/index.html"/>
   </section>
   <section name="resources">

resources/StdMeshers.xml.in

@@ -1,7 +1,7 @@
 <?xml version='1.0' encoding='us-ascii'?>
 <!DOCTYPE meshers PUBLIC "" "desktop.dtd">
 <!--
-  Copyright (C) 2007-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+  Copyright (C) 2007-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 
   Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
   CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS

src/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public

src/Controls/CMakeLists.txt

@@ -1,4 +1,4 @@
-# Copyright (C) 2012-2015  CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2012-2016  CEA/DEN, EDF R&D, OPEN CASCADE
 #
 # This library is free software; you can redistribute it and/or
 # modify it under the terms of the GNU Lesser General Public