Philippose Rajan
f0a97767bd
* OpenFOAM 1.5+ Export: Even further optimisations, and more code documentation added
2009-10-31 19:53:43 +00:00
Philippose Rajan
9e64043989
* OpenFOAM 1.5+ Export: Further optimisation and efficiency improvements (over two times faster than the previously committed version!)
2009-10-30 22:25:36 +00:00
Philippose Rajan
ef79ddd30f
* OpenFOAM 1.5+ Export function optimised for speed / efficiency
...
* Small usability improvements to "menustat.tcl" file
2009-10-29 23:51:32 +00:00
Joachim Schoeberl
f6823a4769
QuickSort
2009-10-28 00:26:33 +00:00
Joachim Schoeberl
20c2f2757e
quicksort
2009-10-28 00:22:10 +00:00
Joachim Schoeberl
94a06d8cae
quicksort for arrays
2009-10-28 00:04:19 +00:00
Philippose Rajan
e2f16032cc
* OpenFOAM 1.5+ Export capability added
...
* Relevant changes to Makefile.am and MSVC project files
* Pressing the "Quit" toolbar button now pops up a dialog box
2009-10-27 23:11:15 +00:00
Philippose Rajan
b2e8610f90
* Changes to the Boundary Layer generation system
...
* More user feedback when saving and exporting mesh files to disk
2009-10-27 23:04:42 +00:00
Joachim Schoeberl
6f39164242
reduced memory requirement for the setup of topology faces
2009-10-27 18:14:45 +00:00
Joachim Schoeberl
aa805dfafe
geometry info for elliptic-cylinder
2009-10-12 21:41:54 +00:00
Joachim Schoeberl
1600d09c53
bug fix for surface-element lists
2009-10-08 15:36:46 +00:00
Joachim Schoeberl
dd50309393
bug fix for surface-element lists
2009-10-08 15:34:57 +00:00
Philippose Rajan
3abc034f09
* Smallest assigned boundary condition number corrected from "0" to "1" in order to maintain compatibility with NgSolve
...
* Improved code consistency between Automated assignment and Profile based assignment algorithms
* More informative messages
2009-10-04 15:19:14 +00:00
Philippose Rajan
0d1f18749d
* Temporarily fixed bug: array "facedecoding" gets corrupted after converting a mesh to second order, subsequently causing a crash on using the function "GetSurfaceElementsOfFace"
...
-- Corrected by uncommenting a previous approach used to obtain the surface elements of a face, and commenting out the currently used code till further clarification
2009-10-04 15:15:57 +00:00
Philippose Rajan
df79bea6bd
* Code cleanup and formatting
...
* Included error checking when opening OCC geometry files
* Attempt to retain face colours even after geometry healing
* Fixed a bug which did not clear face mesh size array when a new geometry was loaded
* More consistent code between STEP and IGES geometry load functions
2009-10-04 15:12:43 +00:00
Philippose Rajan
5701d9f094
* Updated version number for Windows to 4.9.12-dev
2009-10-04 15:07:07 +00:00
Joachim Schoeberl
c4c3773610
save export filetype
2009-09-22 07:12:00 +00:00
Joachim Schoeberl
9b88c07cb7
fix Makefile
2009-09-11 20:07:34 +00:00
Joachim Schoeberl
cfbaf15528
version 4.9.11
2009-09-11 17:31:40 +00:00
Joachim Schoeberl
e3104d36a6
version update
2009-09-08 20:37:33 +00:00
Joachim Schoeberl
7d961851fb
prepare for togl2.0
2009-09-07 15:15:22 +00:00
Joachim Schoeberl
975d220350
namespaces, layers for 2D geometry
2009-09-07 11:50:13 +00:00
Joachim Schoeberl
c429a6cc6c
2d meshing
2009-09-07 10:23:23 +00:00
Philippose Rajan
4a3a49f5fd
* Nglib now supports surface and volume meshing of OCC geometry
...
* OCC code cleanup
* Added to Nglib source code documentation
2009-09-01 21:36:09 +00:00
Philippose Rajan
4fc9c40286
* Made the OCC subsystem independent of STLParameters (stlparam)
...
* Added a new class OCCParameters to handle OCC specific parameters
2009-08-30 12:36:11 +00:00
Joachim Schoeberl
f3fd0c6bbd
fix double<complex> incompatibility
2009-08-29 09:29:09 +00:00
Joachim Schoeberl
41de0eaa1a
remove moveable mem
2009-08-25 14:01:10 +00:00
Joachim Schoeberl
670509b52b
baseclass NetgenGeometry
2009-08-25 14:00:20 +00:00
Joachim Schoeberl
aa2fda0ae2
legaltet
2009-08-25 08:44:03 +00:00
Joachim Schoeberl
8187d4f4e8
visual
2009-08-24 02:56:22 +00:00
Joachim Schoeberl
f14a04a837
basegeometry, disable moveablemem
2009-08-24 00:03:40 +00:00
Joachim Schoeberl
1420b8dc9e
visualization fixes
2009-08-05 14:20:30 +00:00
Joachim Schoeberl
c685dd39bf
remove some visual warning
2009-07-26 13:54:15 +00:00
Joachim Schoeberl
56ad80e09a
2d examples
2009-07-24 23:14:31 +00:00
Philippose Rajan
10a7476bb7
* Fixed OCC Visualisation
...
* OCC Visualisation was broken after changes to visualisation subsystem was made [SVN Rev: 174]
2009-07-24 09:32:42 +00:00
Joachim Schoeberl
18a0f73dc5
dll-export
2009-07-23 13:02:40 +00:00
Philippose Rajan
6e65bbe80a
* Face Colours - Bugfix - Black (RGB: 0,0,0) is also a valid colour for a face!!
2009-07-22 22:59:20 +00:00
Joachim Schoeberl
63cacb0343
delete vector
2009-07-22 19:01:39 +00:00
Joachim Schoeberl
7c21eb94c7
windows fixes
2009-07-22 18:13:50 +00:00
Joachim Schoeberl
6d6b60fffe
mesh smoothing
2009-07-22 16:05:58 +00:00
Joachim Schoeberl
f3043d2df9
improvement in visualization
2009-07-20 08:36:36 +00:00
Joachim Schoeberl
54341e5c53
Netgen/NGSolve interface - Version 2
2009-07-19 17:33:25 +00:00
Joachim Schoeberl
7ac50aacf6
new interface
2009-07-13 13:03:01 +00:00
Philippose Rajan
45e71b854e
* Colour based boundary condition assignment now independent of OpenCascade function calls and can be used for all Netgen Geometry and mesh types
...
* Changed the names of the files and functions used to handle colour based boundary condition number assignment
* Change made in order to make the functionality more generic and not dependent on OpenCascade functions / Geometry
2009-07-11 21:03:10 +00:00
Philippose Rajan
dd5ae2c395
* Added "Dist" and "Dist2" functions to the Vec3d class
2009-07-11 20:59:02 +00:00
Philippose Rajan
87e74276f3
* Use the new mesh level face colour functions instead of OCC function calls
...
* Removes dependency on OCC for mesh visualization even for meshes created from OCC Geometry
* Code cleanup to remove old commented out functions
2009-07-10 12:01:45 +00:00
Philippose Rajan
04cb56a8ff
* Extended VOL format to include face colour data
...
* Modified Mesh Save and Load functions to handle new type "face_colours"
* Face colours handled as RGB triplets
2009-07-10 11:59:24 +00:00
Philippose Rajan
2b4e7aad8f
* Face colours added to FaceDescriptor class to allow for geometry independent implementation of face colours
...
* Added functions to set and retrieve face colour data to FaceDescriptor class
2009-07-10 11:56:45 +00:00
Joachim Schoeberl
654914c3e1
multi point element transformation in nginterface_v2
2009-07-06 08:16:02 +00:00
Joachim Schoeberl
ef8edec3b8
bug fix from boundarylayer
2009-07-01 11:34:38 +00:00
Philippose Rajan
4cc2d7dc92
* Prismatic Boundary Layers (Highly experimental code !!!)
...
* Works for basic cases, but does not check for mesh validity yet
* Lot of work to be done... not ready for general use yet !!
2009-06-19 05:43:23 +00:00
Philippose Rajan
0461899071
* Improved colour based boundary condition assignment for OCC geometry
...
* Now allows the boundary condition numbers to be assigned via a profile file "netgen.ocf"
* The old algorithm for automated selection is used if no profile file exists
2009-06-19 05:41:22 +00:00
Joachim Schoeberl
1fd07f3845
reduce warnings
2009-06-14 10:49:08 +00:00
Joachim Schoeberl
7a6e3f64c1
compilation error bug fix
2009-06-10 16:12:20 +00:00
Joachim Schoeberl
611a53801d
vector/matrix access, small optimization in CalcTetBadness
2009-06-06 19:33:32 +00:00
Joachim Schoeberl
8fbe8c3e31
version 4.9.9
2009-05-09 17:52:42 +00:00
Joachim Schoeberl
51d4a12781
change in loading ngsolve
2009-05-09 10:22:16 +00:00
Joachim Schoeberl
306035adee
RunParallel in nginterface
2009-05-09 09:48:16 +00:00
Joachim Schoeberl
b8d71dd7a5
occ-visual
2009-04-30 12:13:49 +00:00
Joachim Schoeberl
777f9c65f2
reduce warnings
2009-04-27 17:44:28 +00:00
Philippose Rajan
fb9b71b9cc
* Added DLL_HEADER exports to template specializations (Used in NgSolve)
2009-04-19 22:10:55 +00:00
Joachim Schoeberl
2584903baa
extrusion fixes, reduce warnings
2009-04-19 21:15:26 +00:00
Joachim Schoeberl
ff3eaf1119
MSVC adaption
2009-04-17 04:07:42 +00:00
Joachim Schoeberl
6222d32e34
extrusion
2009-04-14 19:20:09 +00:00
Joachim Schoeberl
42e72d3bb6
csg visualization bug/fix
2009-04-05 11:39:00 +00:00
Philippose Rajan
73451bace6
* Fixed - Unnecessary functions exported from OCC Topology Explorer code
2009-04-04 21:43:55 +00:00
Joachim Schoeberl
62c877a83d
nginterface - dll
2009-04-04 13:43:02 +00:00
Philippose Rajan
a7f8772932
* Bug-fix: Fixed loss of OCC face colours after performing a geometry healing run
2009-04-03 20:11:18 +00:00
Philippose Rajan
cb777203cf
* Code reformatted for improved readability
2009-04-03 20:09:46 +00:00
Joachim Schoeberl
39858c7756
nginterface_v2
2009-04-03 14:39:52 +00:00
Philippose Rajan
3e457df12d
* Reformatted source code for readability
2009-03-31 21:08:17 +00:00
Joachim Schoeberl
f4d4084b1d
don't repair bisect
2009-03-26 09:49:40 +00:00
Joachim Schoeberl
8d932819dd
set STL geomtype
2009-03-25 08:51:23 +00:00
Joachim Schoeberl
977e39e1c0
bug fix
2009-03-20 05:59:47 +00:00
Philippose Rajan
3092d6cb9d
* First version of automated colour based boundary conditions for OpenCascade geometry
...
* Modified the menustat.tcl file to add an entry in the "Special" menu for the colour based boundary properties functionality
* Added the relevant TCL wrapper functions in ngpkg.cpp to enable the above functionality
* Note: The core functionality is implemented in the file "occauxfunctions.cpp"
2009-03-15 12:25:09 +00:00
Philippose Rajan
9d0be8a262
* Updated /libsrc/occ/Makefile.am to reflect addition of the two new files occauxfunctions.hpp and occauxfunctions.cpp
...
* Updated the Visual C++ 2005 / 2008 project files to reflect the addition of the two new files
2009-03-15 12:19:26 +00:00
Philippose Rajan
e266a0115d
* Added a separate source and header file for OpenCascade Auxiliary functions which cannot be directly categorised under either geometry or mesh operations.
2009-03-15 12:17:27 +00:00
Philippose Rajan
87404f51c9
* Improved error checking for mesh size file loading / reading
...
* Corrected uninitialized variables in mesh size file function
2009-03-10 20:39:16 +00:00
Philippose Rajan
ac8ac8aa14
* Bug-fix for mesh size file usage with OpenCascade geometry
2009-03-10 19:56:24 +00:00
Philippose Rajan
69b63a2c25
* Modified function LoadLocalMeshSize to print a message if the specified mesh file could not be loaded (due to non-existent file, no read access, etc....)
2009-03-09 23:01:07 +00:00
Philippose Rajan
28270266ca
* Enable use of mesh size file with OpenCascade Geometry
2009-03-09 22:58:03 +00:00
Philippose Rajan
dd9cc6abac
* Standard mesh colour changed to Green in OCC Geometry to maintain consistency across Netgen
2009-02-25 18:39:51 +00:00
Joachim Schoeberl
61f9699f10
standard mesh color green
2009-02-25 16:52:41 +00:00
Joachim Schoeberl
22e83bf294
added missing file
2009-02-25 16:06:34 +00:00
Philippose Rajan
78736845ca
* Fixed the OCC XDE Interface for BREP and IGES Files
...
* Added stricter error checking for face colour extraction
* Improved consistency of OCC geometry and mesh colours across file formats
2009-02-23 23:10:00 +00:00
Joachim Schoeberl
e61fdd097f
use TOGL_WINDOWINGSYSTEM
2009-02-04 23:29:53 +00:00
Joachim Schoeberl
976326590f
use TOGL_WINDOWINGSYSTEM
2009-02-04 23:26:52 +00:00
Joachim Schoeberl
18ad8379c0
use TOGL_WINDOWINGSYSTEM
2009-02-04 23:25:09 +00:00
Joachim Schoeberl
22d86c1838
portable opengl in autotools (Mac aqua)
2009-02-04 23:09:28 +00:00
Joachim Schoeberl
0c3c3f32d1
occ build visualization mesh
2009-02-01 23:08:39 +00:00
Joachim Schoeberl
d468527ef4
indirect rendering openGL context (required for parallel visualization)
2009-02-01 13:21:11 +00:00
Joachim Schoeberl
4a9be1de47
occ and nglib fixes
2009-01-31 21:07:21 +00:00
Philippose Rajan
6fedcf841a
* Added additional conditional coding to differentiate between Linux and Windows Compiles
2009-01-31 20:16:46 +00:00
Philippose Rajan
85867fb240
* Added OpenCascade XDE Support to enable importing of individual surface colours from STEP Geometry
...
* Extended the Clipping Planes functionality to the Geometry mode for OCC Geometry
* Added the option to specify the maximum mesh size for each individual face in an OCC Geometry
2009-01-30 22:17:20 +00:00
Philippose Rajan
34bfd4a349
* Added a new Compiler Switch (MSVC_EXPRESS) to enable Netgen to be compiled using the Express Editions of Microsoft Visual C++
2009-01-30 22:12:17 +00:00
Joachim Schoeberl
64ae03d661
added missing comma
2009-01-29 20:33:13 +00:00
Philippose Rajan
af9d554ecb
Adding Gmsh v2.xx Mesh Export Capability - Currently upto 2nd Order Triangles, Quadrangles and Tetrahedra
2009-01-29 20:28:30 +00:00
Joachim Schoeberl
00bc4a1220
remove generated files (Makefile.in)
2009-01-29 19:33:21 +00:00
Joachim Schoeberl
b087ac2f72
'memory usage' bug fix
2009-01-28 21:32:30 +00:00
Joachim Schoeberl
315fabab8d
remove files
2009-01-25 22:04:04 +00:00
